T O O L I N G S BORING SYSTEM
|
|
- Iris Hampton
- 5 years ago
- Views:
Transcription
1 Finetech T O O I N G S BORING SYSTEM
2 MICRO BORING KIT The MICRO BORING KIT was developed to accommodate & manufacture a wide range of bores from Dia 10 mm to 84 mm using a single MICRO BORING HEAD. The parts are made of high quality tool steel & heat treated to a good hardness, for a longer durability and maintain its accuracy for many years. Also care has been taken to design and manufacture every part with stringent quality checks to produce products of very high quality. The MICRO BORING KIT contains all the required accessories to conveniently FINISH bores from Dia 10 mm to 84 mm. The boring bars have been manufactured to bore up to 3 times its diameter. Also the design is such that the boring bar does not move too much from its center to maintain a balance and facilitate a good boring accuracy. Through coolant facility can be provided for easy chip removal and better cutting of material.
3 MICRO BORING KIT MBK/FTB01 DIA mm PART IST 1. FBH 080. FB FB FB FB.. EB M5 SCREW 7. FC FC CAMPING NUT + M10 SCREW 10. FC mm AEN KEY 1. T8 TORX KEY USER GUIDE FOR MICRO BORING KIT EB5.53 FC 5484 FB10.35 Ø10-14 FB1.4 Ø1-1 FB1.55 Ø1- FB. Ø-8 FC 83 Ø8-3 FC 354 Ø3-54 Ø54-84
4 FINISH BORING BARS D FINISH BORING BAR FB.1 FB 8.8 RANGE D CARTRIDGE INSERT Ø - Ø8 1.0 Ø8 - Ø WCGT0 WCGT0 FB Ø10 - Ø FB 1.4 Ø1 - Ø1 4.0 FB 1.55 Ø1 - Ø 55.0 FB. Ø - Ø8.0 EB 5.53 Ø8 - Ø3.0 FC 83 SCREW TS 1 TS 1 EB 5.53 Ø3 - Ø FC 354 FINISH BORING CARTRIDGES CARTRIDGE RANGE D INSERT INSERT SCREW FC 8 Ø - Ø8 CCGT0 TS 5 FC 83 Ø8 - Ø3 TCS50 FC 354 Ø3 - Ø54 FC 5484 Ø54 - Ø84 FC Ø84 - Ø105
5 MICRO BORING HEADS FBH SERIES 5 The MICRO BORING HEAD, FBH series are available from dia mm in different sizes up to 105mm. The head has a fine adjustment of microns on dia. The system is built on a modular concept with MC-3 connection on one side. The BORING HEADS are designed with a good dia/length ratio for better depth without compromising on the rigidity and to give excellent hole quality. D MICRO BORING HEAD RANGE D CARTRIDGE INSERT SCREW FBH 8 - B01 Ø - Ø FC 8 CCGT0 TS 5 FBH 83 - B01 Ø8 - Ø FC 83 FBH B01 Ø3 - Ø FC 354 FBH B01 Ø54 - Ø FC 5484 FBH B01 Ø84 - Ø FC NOTE : EXTENSION OF ARGER ENGTH CAN BE SUPPIED ON REQUEST
6 MICRO BORING HEADS CBH SERIES ADAPTOR BMC-5 The CBH-B01 is designed to bore large dia bores beyond 105 mm. It has a fine adjustment of microns on dia. It is mounted on a modular bridge BRF series with BMC-5 modular connection to give a very rigid holding. It also has a counter weight to provide a balanced tool. The range can be easily extended by changing the bridge. CBH-B01 BRIDGE HEAD- CBH CARTRIDGE MICRO BORING HEAD RANGE D BRIDGE CARTRIDGE INSERT CBH-B01 Ø105 - Ø135 BRF 105 FC CBH-B01 Ø135 - Ø15 BRF 135 FC CBH-B01 Ø15 - Ø00 BRF 15 FC ADJUSTABE TWIN ROUGH BORING TOOS DIA mm d d1 D ROUGH BORING BAR RANGE D d d1 CARTRIDGE Wt.KG RBT 18 Ø18 - Ø RC 18 Ø1.0 MC RBT 8 Ø - Ø8 RC 8 Ø0.0 MC RBT 83 Ø8 - Ø3 RT 83 Ø5.0 MC RBT 350 Ø3 - Ø50 RT 350 Ø3.0 MC RBT 5070 Ø50 - Ø70 RT 5070 Ø45.0 MC RBT Ø70 - Ø105 RT-105-A Ø50.0 MC NOTE : THROUGH COOANT IS OPTIONA
7 TWIN ROUGH BORING TOOS DIA mm 7 ADAPTOR BMC-5 BRIDGE CARTRIDGE ROUGH BORING HEAD RANGE D BRIDGE CARTRIDGE INSERT BRR105 Ø105 - Ø135 BRR 105 RT-105-A TCMT1 BRR135 Ø135 - Ø15 BRR 135 RT-105-A TCMT1 BRR15 Ø15 - Ø00 BRR 15 RT-105-A TCMT1 ROUGH BORING CARTRIDGES CARTRIDGE RANGE INSERT INSERT SCREW TORX KEY SET SCREW CAMP SCREW RC 18 Ø18 - Ø CCMT 0 M.5 X 0.45 T8 M3 X 0.5 M3 X 0.5 RC 8 Ø - Ø8 CCMT 0 M.5 X 0.45 T8 M3 X 0.5 M4 X 0.7 RT 83 Ø8 - Ø3 TCMT 09 M. X 0.45 T7 M4 X 0.7 M5 X 0.8 RT 350 Ø3 - Ø50 TCMT 11 M.5 X 0.45 T8 M5 X 0.8 M X 1.0 RT 5070 Ø50 - Ø70 TCMT 1 M4.0 X 0.7 T15 M X 0.1 M8 X 1.5 RT-105-A Ø70 - Ø105 TCMT 1 M4.0 X 0.7 T15 M X 0.1 M10X1.5 NOTE : THROUGH COOANT IS OPTIONA
8 ASSEMBY INSTRUCTION FOR ROUGH BORING HEAD 8 DIA DIA BMC-5 ADAPTOR D-NUT with tapped hole for cartridge holding D-NUT for cartridge clamping SET SCREW for cartridge adjustment ROUGH ADJUSTMENT SCREW CARTRIDGE CARTRIDGE PATE AEN SCREW for cartridge clamping AEN SCREW for adaptor clamping AEN SCREW for plate clamping AEN SCREW for cartridge clamping U DRIS The U-DRIS are available from dia 19.0mm up to 40.0mm. The drills flutes have been designed for a smooth cutting and easy chip removal, ensuring a 1 stable cutting. We have used a ISO WCMT insert with 3 D edges making it economical and early available. U DRIS FUTE ENGTH 1 SHANK DIA D INSERT SCREW Ø19, 0, Ø0 WCMT 04 M.5 Ø, 3, Ø5 WCMT 04 M.5 Ø5, Ø5 WCMT 05 M3.0 Ø7, 8, Ø5 WCMT 05 M3.0 Ø30, 31, 3, Ø3 WCMT 0 M4.0 Ø34, 35, Ø3 WCMT 0 M4.0 Ø37, 38, 39, Ø3 WCMT 0 M4.0 NOTE : THROUGH COOANT IS OPTIONA
9 MODUAR ADAPTOR MC-3 9 The complete design of boring tools is built on a MODUAR concept. This helps in easy interchanging of tools. The parts to be coupled are inserted and fastened with the help of tapered bolt and nut. On tightening the tapered bolt, it creates a axial thrust to clamp the face rigidly. The diameter and face are accurately ground to give perfect seating, a better concentricity and rigidity. The modular adaptor are available in different machine tapers (BT-40, BT-50, SK-40, HSK-3, HSK-100 etc.,) with MC-3 connector, to suit the BORING HEADS of FB series from rough boring tools. For boring tools from dia 105 mm to 00 mm, modular adaptors with BMC-5 are available in various machine tool tapers. The bridge BRF and BRR series are rigidly clamped to the adaptor using allen bolts. ADAPTOR MC3/BMC5 BT 40 BT 50 HSK 3 HSK 100 GP OCKING EFFECT M/C TOO ADAPTOR FOR BRIDGE CAMPING BMC-5 This has a very rigid construction, to take the cutting tools required while roughing large diameters. The bridge is firmly clamped to the BMC-5 adaptor, and engages into the slot for a positive drive during machining.
10 USER SEECTION GUIDE FOR FINISH BORING TOOS 10 C H SE S " B " RIE C 5 BM BRF105 (Ø ) CW/CBH-B01 CB H - B0 1 RF1 Ø 15) B 35 ( 135- C W /CB H - B 01 CBH-B 0 1 BRF 1 5 (Ø 15-00) CW /C BH -B01 CBH-B 0 1 FB H 080 FB H 350 EB5. 53 FC5480 Ø F c 83 Ø 8-3 F C Ø FC3554 Ø FB. Ø -8 "FBH" SE R IES FBH 83 F B 1. 4 Ø 1-1 F B Ø 1- FB Ø FBH 8 F B 8. 8 Ø 8-10 FB. 1 Ø -8
11 M C 3 RC 18 Ø18-Ø RC 8 RC Ø -Ø 8 Ø70-Ø105 RC 83 Ø8-Ø3 R C 350 Ø3-Ø50 R C Ø50-Ø 7 0 USER SEECTION GUIDE FOR TWIN ROUGH BORING TOOS DIA 18 TO 00 mm 11 RR 5 ( ) B 10 Ø 5 3 BRR13 5 (Ø ) BRR15 (Ø ) RBT RBT5070 RBT350 RBT83 MC3 M C3 MC3 MC3 MC3 RBT8 RBT18
12 Introduces BORING SYSTEM that makes hole making convenient and cost effective. Having been in the machining field for more than a decade and with a lot of experience in fine boring and rough boring, we have tried to offer a range that will be useful and convenient to all user (both for production and one off application). We have made it economically affordable so that even small machine shop can afford to use them. The range and boring length have been so designed that it can be used for most of your needs, with minimum number of tools, accessories and inserts. We have rough boring heads from Ø18 mm to 00 mm and finish boring head from Ø.0 mm to 00.0 mm. ISO Manufactured by : Finetech T O O I N G S Plot No.V-1, IV Main,(Next to C-177), Peenya Indl. Estate, II Stage, Bangalore INDIA. Tel : , , finetech1@gmail.com Web :
Product Overview. for perfect connections
Product Overview for perfect connections TOOL HOLDERS FOR DRILLING, TAPPING & REAMING Smart solutions for high quality clamping systems in tapping applications Tapping solution range from M1 M200 Quick
More informationTechnical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
More informationVHF 2 VHF 2. Vertical Milling Machine
Vertical Milling Machine VHF - ideal series for mechanic workshops, training, single part and replacement part manufacturing, and prototyping including 3-axis position indicator travel x-axis 600 mm y-axis
More informationVarious other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple
Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated
More informationSVn. Direction for Use Ev.no.: modular boring system SVn 90, SVn 380, SVn 600. Producer:
Direction for Use Ev.no.: 0620205 SVn modular boring system SVn 90, SVn 380, SVn 600 Producer: Moskevska 63 101 00 Praha 10 Vrsovice Czech Republic Tel.: +420 246 002 249 Fax: +420 246 002 335 e-mail:
More informationPF 3000 Face Milling Cutter
Perfection in machining PF 3000 Face Milling Cutter UHRIN YOUR WORLD-WIDE PARTNER ADVANTAES axially adjustable inserts standard tool Ø 63 250 available ex-stock reduced spindle loading thanks to light
More informationClamping tools with flange module
Clamping tools with flange module MAPAL clamping tools with flange module are recommended for machining conditions in which radial run-out and angular error on the machine spindle must be compensated.
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More informationROOP LAL Unit-6 Drilling & Boring Mechanical Engineering Department
Lecture 4 Notes : Drilling Basic Mechanical Engineering ( Part B ) 1 Introduction: The process of drilling means making a hole in a solid metal piece by using a rotating tool called drill. In the olden
More informationWORKHOLDING DEVICES AND CLAMPING ELEMENTS
WORKHOLDING DEVICES AND ELEMENTS UNIVERSAL STRAP CLAMP For power presses, milling, drilling, shaping and boring. Supplied complete with T-Bolt, Nut etc. USC-(a) USC-(b) USC-(a) USC-(b) USC-(a) USC-(b)
More informationChain Drive Vise. Installation Instructions. (revised 05/04/2016)
Chain Drive Vise Installation Instructions (revised 05/04/2016) Lie-Nielsen Chain Drive Vise Instructions Table of Contents page About Your Chain Drive Vise 3 Parts List 4 Exploded Parts Diagram 5 step
More informationWorkpiece Clamping. Collets for Workpiece Clamping Collet Chucks for Workpiece Clamping
Workpiece Clamping Collets for Workpiece Clamping Collet Chucks for Workpiece Clamping Overview of Contents Page Collets for Workpiece Clamping Draw-in Collets DI 2 Dead Length Collets DL 3 Emergency Dead
More informationøc Taper No. Model Taper No. øc ød H W P øm Adapter Model TMS TMS
PERIPERAS PERIPERAS TOOING MATE For mounting and removal of PUSTUD BOTs and tools! øc Taper No. Adapter ock Screw W P Exchangeable Adapter Taper No. Special resin 4-øM Taper No. øc W P øm Adapter TMS40-30
More informationPSK Tool Holders. Chapter 2 of the Product Catalogue 2010/2011 Precision Tools
PSK Tool Holders Chapter 2 of the Product Catalogue 2010/2011 Precision Tools PSK - Polygonal Kelch GmbH Tel.: +49 (0) 71 51 / 2 05 22-0 Fax: +49 (0) 71 51 / 2 05 22-11 info@kelchgmbh.de www.kelchgmbh.de
More information10 ZX FACING / CONTOURING HEADS 16 ZX MODULAR BORING TOOLS (MBT) 22 ZX VALVE SEAT POCKET TOOLS 31 SPECIAL APPLICATIONS 35 HOW TO REQUEST A QUOTATION
ZX Systems TM FACING, & CONTOURING ZXBORING, SYSTEMS contents 2 OVERVIEW OF ZX BORING, FACING, AND CONTOURING SYSTEMS 10 ZX FACING / CONTOURING HEADS 16 ZX MODULAR BORING TOOLS (MBT) 22 ZX VALVE SEAT POCKET
More informationMACHINE TOOL ACCESSORIES
DA80 COLLETS, COLLET CHUCKS AND KITS SERIES 992: Full /32" range of collapse. Concentricity within 0.0005" T.I.R. at collet nose assembled with chuck. Self release for rapid, easy operation. Interchangeable
More informationACCESSORIES.
Rotary, Dividing, & Cross Tables 166 Indexes 167 Dividing Heads 168 Screw Jack Sets 168 Angle Plates & V-Blocks 169 Quick Change Tool Posts & 170-171 CNC Tool Holder Bushings 171 Lathe Chucks 172-177 www.sowatool.com
More informationOperating instructions. Fine boring head Ø3-88 with digital display
Operating instructions Fine boring head Ø3-88 with digital display English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety
More informationVHF 3 VHF 3. Universal Milling Machine. Rigid Universal Milling Machine for drilling and milling, with large travels.
Universal Milling Machine Rigid Universal Milling Machine for drilling and milling, with large travels incl. 3-axis position indicator travel distances X axis 750 mm Y axis 280 mm Z axis 430 mm speed range
More informationT360. Holders and Inserts - T-Cap. Features T333. Holders T335. Inserts T336. Clamping units T337. Sleeves for clamping units T338.
T358 T329 Holders and Inserts - T-Cap Features Holders Inserts Clamping units Sleeves for clamping units T-CAP Kits T333 T335 T336 T337 T338 T339 User Guide Comparison test results Surface finish Tool
More informationFlexible tool overhang lengths possible by combining the modular extension arbor and shank with insert run-out adjustment mechanism
Sumi Easy insert replacement Characteristics Achieves efficiency through high speed, high feeding ability!! (v c =50 to 500m/min, f = 0.4 to 1.2mm/rev) Compatibility with a wide range of cutting conditions
More informationDIVIDING EQUIPMENT DIVIDING EQUIPMENT
64 DIVIDING EQUIPMENT 65 D-01 UNIVERSAL TILTING ROTARY TABLE Model: HUT-300 QUICK MANUAL INDEXING. Suitable for milling, boring, shaping, drilling, dividing, setting angles and for circular cutting. Tilting
More informationComponents made of special materials. Floor Elements for Profile St Profile KH. Fastening Elements for Profile KH
Profile Fastening Elements for Profile Floor Elements for Profile Profile KH Fastening Elements for Profile KH Components made of special materials Products in this section Profile 8 x eel profile that
More informationDIN ISO 12164
It is the outstanding rigidity and accuracy of the NEW BABY CHUCK, used for holding the cutting tool, that produces high precision with less runout. Available in various sizes to meet specific production
More informationBORING. Applications. Products. Spare parts Cutting data and chip control. Roughing
Content Applications Tool selection guide Roughing inishing/reaming Products Roughing Coroore 820 - Three insert design Coromant Capto and SK - 1.378-12.047 inch 4 5 7 8 General Turning Duoore - Two insert
More informationFeatures of TOOLFAST Clamping Devices and Clamping Elements
PART I CLAMPING DEVICES & CLAMPING ELEMENTS INTRODUCTION In the following pages of this part of catalogue, different types & sizes of clamping devices and clamping elements manufactured by us are illustrated.
More informationBHJ Products, Inc. Parts List & Instructions
Product Name: Lifter-Tru Kit for Ford Windsor & SVO Small Block V8 Page 1 of 5 Kit Contents: 2x End Plates 2x 5/8 Threaded Adjustment Sleeves 1x Front Angle Bracket 2x 5/8 Adjustment Sleeve Spacers * 1x
More informationOperating instructions. Twin cutter boring head Ø mm
Operating instructions Twin cutter boring head Ø23.5-153.0 mm English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety information
More informationMF 1 MF 1 V MF 1 MF 1 V. Multipurpose Milling Machines. Most widely used milling machine type word-wide!
Multipurpose Milling Machines Most widely used milling machine type word-wide! with 3 axes position indicator head swivels through 3 axes swivel r + l ± 90 ilt forward + reverse ± 45 rotation on the column
More informationHIGH SPEED BORING BARS. THE ACCURATE & ADVANTAGED SOLUTION High Efficiency/Easy Adjustment. Cat.No.9
Featuring Improved Cycle Time Roughness Position Accuracy True Roundness HIGH SPEED BORING BARS High Efficiency/Easy Adjustment THE ACCURATE & ADVANTAGED SOUTION www.jic-tools.com.tw Cat.No.9 Global Marketing
More informationSHOWA TOOL. GENERAL CATALOG SHOWA TOOL
SHOWA TOOL SHOWA TOOL GENERAL CATALOG www.showatool.com SHOWA TOOL SH INDEX A AS B ADJUST SCREW for MICRON CHUCK H series, M series BC SPARE BLADE CLAMP 67 BK BLADE (For Standard Head) 60 BKF BLADE (For
More informationZero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
More informationLightweight HSC milling cutter for a perfect surface finish. flycutter - system eco
Lightweight HSC milling cutter for a perfect surface finish flycutter - system eco 2 milling FlyCutter - System Eco mapal FlyCutter - System Eco The FlyCutter series represent a new dimension in face milling
More informationCylindrical shank version Indexable Insert Endmill
Cylindrical shank version Indexable Endmill ø1 - ø 1 ød ST-FCM1-0 -FCM- 0 -FCM0-0 ST-FCM0-0 ST-FCM0- ST-FCM- -FCM- -FCM- 1 1 ød 1 0 0 1 17 0 0 0 70 1 ARG00 ARG00 ARG00 ARG0 ARG0 CATAOG No. =The ength of
More informationChain Drive Vise. Installation Instructions. (revised 11/29/2018)
Chain Drive Vise Installation Instructions (revised 11/29/2018) Lie-Nielsen Chain Drive Vise Instructions Table of Contents page About Your Chain Drive Vise 3 Parts List 4 Exploded Parts Diagram 5 step
More informationHPC FACE MILLS for rough and finish machining
HOLLFELDER CUTTING TOOLS THE ORIGINAL HPC FACE MILLS for rough and finish machining THE ULTIMATE EVOLUTION! AXIALLY CLOSED CHIP FLUTES EXTREMELY HIGH NUMBER OF CUTTING EDGE FOR FINISH MACHINING CUTTERS
More informationCATALOG No. In Accordance To ISO12164 & DIN69893 HSK-A40,50,63,100 E25,32,40,50 F63
CATAOG No. In Accordance To ISO64 & DIN69893 SK-A40,50,63,00 E5,3,40,50 F63 Clamping Range: ø.08" - ø.38" Clamping Range: ø.00" - ø.787" Clamping Range: ø/8" - ø/" Ultra slim design eliminates any interference.
More informationStudent, Department of Mechanical Engineering, Knowledge Institute of Technology, Salem, Tamilnadu (1,3)
International Journal of Scientific & Engineering Research, Volume 7, Issue 5, May-2016 11 Combined Drilling and Tapping Machine by using Cone Mechanism N.VENKATESH 1, G.THULASIMANI 2, S.NAVEENKUMAR 3,
More informationOverview. Linear Motion and Assembly Technologies /11 Aluminum Framing. Bosch Rexroth Corp. Section 15: Tools
8981 500 201 08/11 Aluminum Framing Linear Motion and Assembly Technologies 1 Section : Tools Overview With Bosch Rexroth aluminum structural framing, you can either specify profiles square cut to length,
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 3" versatile for many applications for
More informationCNC EXPANDING MANDRELS
CNC EXPANDING MANDRELS ID CLAMPING OFFERS FULL OD PART ACCESS PARALLEL EXPANSION FOR OPTIMUM ACCURACY AND GRIP FORCE LARGE RANGE IN STOCK FOR IMMEDIATE SHIPMENT ROYAL CNC EXPANDING MANDRELS Rigid and Accurate
More informationand AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems
and AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems Allied Maxcut Engineering Co. Limited AMEC Indexable Drill Range The AMEC range of adjustable indexable carbide drills provides the
More informationSERIES AWEA MECHANTRONIC CO., LTD. High Rigidity Vertical Machining Centers AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 30, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-194 Website : www.awea.com CENTRAL TAIWAN SCIENCE
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 80 mm versatile for many applications for
More informationINTERAPID Small Bench SHE.30 or SHE.35
0 to 0 mm Mobile measuring bolt mounted on a plain bearing, also fitted with a semi-circular releasing disc plate. Measuring inserts supplied in pairs. One is tighten on the measuring bolt, the other on
More informationLathe. A Lathe. Photo by Curt Newton
Lathe Photo by Curt Newton A Lathe Labeled Photograph Description Choosing a Cutting Tool Installing a Cutting Tool Positioning the Tool Feed, Speed, and Depth of Cut Turning Facing Parting Drilling Boring
More informationLEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY Thread with Maximum Confidence, Depth, Versatility and Economy. Emuge Shur-Thread TM, Threads-All TM, Vario-Z and NPT Solid Carbide Thread Mills; and Gigant-ic
More informationER Spring Collet Chuck System C07. ER Collet Chuck System ER-25/32/40/50. ER Spring Collet Chuck System C13 V-301~318. ER Spring Collet Chuck System
ER Collet C01 C11 C03 ER-8/11/16/20 C12 C07 ER-25/32/40/50 C13 C08 ER-L System C14 ER-Type Coolant Collet C09 ER-GB C14 ER-GB Tap Collets ER Collet V-101~226 V-231~250 V-301~318 V-401~452 V-401~452 C15
More informationPRODUCT NEWS PFC/MPF NEW PRODUCT. No. 303 DIJET INDUSTRIAL CO., LTD. Ø 50, Ø 63, Ø 80: 6 Items. Ø 30, Ø33, Ø 40: 3 Items. Face Mill type.
PRODUCT NEWS No. 303 NEW PRODUCT Face Mill type PFC/MPF Ø, Ø 63, Ø 80: 6 Items Heads type Ø 30, Ø33, Ø 40: 3 Items Up & Down From semi-finishing to super finishing on slide seat surface. High speed up
More informationTAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
More informationFixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
More informationTel CENTER DIST BETWEEN HOLES. CENTER DIST BETWEEN HOLES. CENTER DIST BETWEEN HOLES.
C-Type Boring Head 1 SCALE 0.01mm 0.02mm per Ø Here is a small head that will be in constant demand in any shop. Note the wide base bearing surface that assures maximum rigidity even when the bar holder
More informationChuck adapters Top jaws T-nuts Grippers Gripping force meter Grease Accessories
Chuck adapters Top jaws T-nuts Grippers Gripping force meter Grease Accessories Chuck adapters DIN 55026/ISO-A 702/1 Mounting adapters on short taper spindle noses direct and indirect mounting reduction
More informationCompatibility overview of accessories for milling machines
Compatibility overview of accessories for milling machines Accessories Item No. BF16 BF20/L MB4 F40E BF30 MT3 Copy and planing cutter head MT 2 3350212 BF30 BF46 BF46 ISo30 ISO40 MT4 MF1 MT 50 MT2BV Mf2
More information5-AXIS MACHINING SCS QUINTUS WWW. WORKHOLDINGSOLUTIONSGROUP. COM
WORKHOLDING SOLUTIONS FOR -AXIS MACHINING SCS MC QUINTUS ONE system / MANY solutions WWW. WORKHOLDINGSOLUTIONSGROUP. COM MCCLAMPING S YSTEM for -axis machining MC + Quintus... MC Clamping System Free access
More informationConnectors slot fasteners
Description Slot nut () The slot nut is directly adapted to the T-slot of the structural system. On the support beam, the slot nut may be entered into the T-slot from the beam side, thus making it very
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationDoler Self Colleting Machines*
* P2 Drill with Variable Spacing Foot Light and compact - yet rigid and rugged Modular design - for easy setup and servicing Variety of spindle speeds and terminations to satisfy a wide range of applications
More informationDual Contact System. For High Speeds. Hydraulic Chuck. Runout Adjustable Chuck
Dual Contact System Dual Contact System Dual Contact System Features P1 BIG-PLUS Spindle System S P I N D L E S Y S T E M Dual contact spindle system BBT SHANK A1 BDV SHANK B2 HSK TOOLING SYSTEM Features
More informationACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
More informationPrice List - End Mills MC 45
Price List - End Mills MC 45 (With effect from 7th December 2018) Addison & Co Ltd., established in 1873, is India s largest manufacturer of HSS Cutting Tools. The Company s current product range: I. HSS
More informationSPINDLE SYSTEM PAT. DUAL CONTACT. US Patent No. 5,352,073. MAZAK and MAZATROL are registered trademarks of YAMAZAKI MAZAK CORPORATION.
SPINDE SYSTEM PAT. DUA CONTACT US Patent No. 5,352,073 INTEGREX SERIES INTEGREX e SERIES MAZAK and MAZATRO are registered trademarks of YAMAZAKI MAZAK CORPORATION. R The very first modular tooling system
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationN/C LATHE TOOLING F F
ATHE TOOING ATHE TOOING Collet Chuck System MEGA MICRO CHUCK PAT. Clamping diameter: ø0. - ø6.05 Smaller nut diameter than the body enables installation from the back of the toolholders in small lathes
More informationTOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
More informationCompatibility overview of accessories for milling machines
Compatibility overview of accessories for milling machines Accessories Item No. BF16 BF20/L MB4 F40E BF30 MT3 BF30 ISo30 BF46 ISO40 BF46 MT4 MF1 MT 50 MT2BV MF2 MF4 MT100 MT 200 MT 8 MX 3 MX 4 MT8 Copy
More information11 MACHINING SERVICES
11 MACHINING SERVICES Machining your TSLOTS is an alternate way of assembling your project. Rather than using brackets and joining plates you can have your TSLOTS machined and ready in kit form for quick
More informationBNBX Type BNBX L103. Small Hole Boring Bars SUMIBORON
Small ole BNBX Type BNBX Boring & Facing Brazed 3 Newly developed high rigidity slit-clamping system, excellent for small hole boring Maximum overhang of /D=5 possible. Minimal bar deformation produces
More informationCommand Boring Systems
Command Boring Systems Eco Bore Table Of Contents Eco Bore Boring Systems...1-9 Visit Command Tooling Systems on line catalog for Command standard product part file downloads, up-to-date stock levels and
More informationAllied Maxcut. Engineering Co. Limited. Making a difference. Criterion Allied Catalogue.
EN Allied Maxcut Engineering Co. Limited Making a difference Criterion Allied Catalogue www.alliedmaxcut.com Allied Maxcut (AMEC ) is the European Headquarters of Allied Machine & Engineering Corporation
More informationMounting the 6 or 12 Indexer on PRS Gantry Tools
Page 1 Mounting the 6 or 12 Indexer on PRS Gantry Tools About this guide: This document illustrates several options for mounting an indexer onto your ShopBot. You can choose the technique that works best
More informationCompetence Gun Boring. KOYEMANN Floating Tools Power Reamer
Competence Gun Boring KOYEMANN Floating Tools Power Reamer R The KOYEMANN Floating Principle Reaming has been used for fine machining bores with excellent results from the very start of cutting technology.
More informationDUGARD. Machine Tools Since Dugard HBM-4 / HBM-5 CNC Horizontal Boring Machines.
DUGARD Machine Tools Since 1939 Dugard HBM-4 / HBM-5 CNC Horizontal Boring Machines www.dugard.com Dugard HBM-4 Horizontal Borer Rotary Table Spindle (BT) Gear Box ATC 60 Tools (OPT) Heavy Loading capacity
More informationUDM. 20 year. CNC Double Column No.63, Ln. 136, Sec. 1. Jiahou Rd., Houli Dist., Taichung City 421, Taiwan. Machining Center
20 year U chine Technology Of Experience in Design and Manufacturing of CNC Horizontal Boring & Milling Machine Conventional Horizontal Boring & Milling Machine UBM series CNC Horizontal Boring & Milling
More informationMissouri's trusted provider of carbide cutting tools!
45 & 90 Face Mill Packages For facing, plunging, ramping, and pocket milling Missouri's trusted provider 45 Face Mill packages includes SEKT inserts Watch our All-Material Inserts in action! 90 Face Mill
More informationThe jigs and fixtures are the economical ways to produce a component in mass production system. These are special work holding and tool guiding device
The jigs and fixtures are the economical ways to produce a component in mass production system. These are special work holding and tool guiding device Quality of the performance of a process largely influenced
More informationKTM-16/20 TECHNICAL DATA
TECHNICAL DATA Table Diameter : 1,600mm Max. Turning Diameter : 2,000mm Max. Turning Height : 1,750mm Table Indexing Degree : 0.001mm CNC Controller : FANUC 18i-TB ** Bed The bed has symmetrical structure
More informationCollet Chucks & Morse Tapers End Mill & Shell Mill Holders...147
103 CONTENT Selection Guide System Overview...105 PC Connection...106 Small Diameter & Finish Boring...107 Rough Boring Head Systems...108 Large Diameter Boring System...109-111 Insert Information...112-115
More informationThread Repair & Thread Protection
Thread Repair & Thread Protection Screw Thread Inserts, Kits & Components for Industrial Maintenance, Repair and Overhaul Bulletin 998 C E R T I F I E D ISO 9001 AS 9100 TS 16949 ISO 14001 The HELI-COIL
More informationBoring Milling. MAPAL competence Tools with ISO elements
Boring Milling MAPAL competence Tools with ISO elements Perfect machining technology MAPAL stands for innovative machining solutions with the highest quality, precision and cost-effectiveness. Starting
More informationUseful accessories for lathe and milling systems.
1 Useful accessories for lathe and milling systems. Nearly all accessories are supplied in wooden boxes. For proper and value preserving storage! Dividing attachment TA 250 For precision lathe PD 250/E,
More informationHydroForce. HydroForce HT Hydraulic Chuck High Torque. Hydraulic Chuck (HC) Basic Working Principle
HydroForce HT ADVANCES 2015 HydroForce HT Hydraulic Chuck High Torque First choice solution for rotating applications. HydroForce HT gives you an unparalleled combination of accuracy and clamping force.
More information6.1. PUSH-PULL-PROPS and accessories
6 6.1. PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY 6 GENERAL INFORMATION PUSH-PULL-PROPS AND ACCESSORIES INDEX General information....................... 3 Push-pull-props Type R.....................
More information90 Long Edge Helical End Mill
Limited Package Time Savings Savings on Techniks on Long Edge Milling End Tools Mills 90 Long Edge Helical End Mill For heavy-duty roughing including: slotting, profiling, deep shoulder cutting and ramping
More informationToolpost for HBM 290 lathe
Toolpost for HBM 290 lathe When I bought a new lathe it came with just a square toolpost so I had to use shims to get the tool to correct height. I decided to make a simple toolpost with tool-holders with
More informationBHJ Products, Inc. Parts List & Instructions
Product Name: Lifter-Tru Kit for General Motors LS V8 Page 1 of 5 Kit Contents: 2x End Plates 2x Threaded Adjustment Sleeves 1x Front Angle Bracket 2x M10-1.5 x 65 Hex Head Bolts * 2x Angle Adapter Blocks
More informationMODEL 9301E. Extra Heavy Duty Full Extension Drawer Slide Up to 600-lb. [272 kg.] Load Rating Optional Accessory Platform Brackets*
1 MODEL 9301E APPLICATIONS: This versatile slide is designed for use in a variety of heavy-duty storage applications. Please preview the application information provided on the following pages for further
More informationD c mm Clamp PK247 PK249 PK250 PK251 PK252 PK253 FS2023 (SW 0,9) FS202 (Torx 6)
Reamers R 4060 Tool Designation d 1 Z No. of indexable inserts Indexable insert type d 1h6 R4060.Z10.06H6.00.C-E1 6 10 62 43 15 1 0,05 1 P 65.. - 00R -.. R4060.Z10.07H6.0.C-E1 7 10 65 42 25 1 0,05 1 P
More informationHeadquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan E
YEONG CHIN MACHINERY INDUSTRIES CO., LTD Headquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan sales@ GENERAL TEL : 886-4-2562-3211 SERVICE TEL : 886-4-2561-2965 FAX : 886-4-2562-6479 FAX
More informationOther Types Of Bushes
Other Types Of Bushes Circuit board drill bushes: Designed to accommodate larger shank for making drill on circuit board Chip breaker bushes: Designed with chip breaking notch. Reduces friction and heat
More informationCoroChuck 970 SynchroFlex Benefits
Benefits Better surface quality on the flanks of the cut threads Longer tool life due to less friction Greater process security Due to the reduced risk of breaking the tap especially with small dimensions
More informationJapan's No.1 Modular Boring System
DT Diagram to determine cutting data for steel With increased projection length, the cutting speed should be lowered due to possible chatter, as shown on the diagram right. Refer this diagram and tables
More information3.0mm Rod Fixings Components
800-753-9688 sales@novadisplay.com www.novadisplay.com 3.0mm Rod Fixings Components 3mm Basic Rod Fixings RB1 RB2 RBT1 1.0M (3' 3-3/8") LONG ROD WITH ADJUSTABLE ANGLE FIXING - Screw Fixing Type for Ceiling
More informationIN 578. Tools Required. Torque Specification: 10mm Socket 7/16 Socket 1/2 Socket 1/2 Wrench 7/16 Wrench 1/8 Allen Wrench.
Tools Required 2011-C Ford F250/F350 No Drilling into Vehicle is Required 10mm Socket 7/16 Socket 1/2 Socket 1/2 Wrench 7/16 Wrench 1/8 Allen Wrench FL277 x 1 Torque Specification: 1/4 Bolts - 6 Ft Lbs.
More informationROTARY TABLE OPERATION AND SERVICE MANUAL HORIZONTAL AND VERTICAL. Horizontal & Vertical. Rotary Table (HVRT) Tilting Rotary Table
Horizontal & Vertical Rotary Table (HVRT) OPERATION AND SERVICE MANUAL Tilting Rotary Table Horizontal & Vertical Rapid Indexer VERTICAL AND HORIZONTAL ROTARY TABLE This Horizontal & vertical table is
More informationEfficient workholding. Collet Chucks Mandrels Collets
TM Efficient workholding ollet hucks Mandrels ollets Index ollet huck Index of Klamp Products ollet hucks Q & Series Page 3 Quick hange ollet hucks QRL Series Page 4-7 Short Series ollet hucks RS Series
More informationTRAINING MANUAL. Part 3 REAMERS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.
More informationPRESENTATION. All machining Repetitive machining. The choice of a wide range of varied clamps that correspond to the individual s needs
KOPAL PRESENTATION Vertical pressure clamping System KOPAL With neither riser block nor adjusting required, the system allows a continuous adaptation of the clamping height whilst retaining the clamping
More informationPull-down clamps. No Low height clamping jaws, model Bulle
Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.
More information