Absco Aviary Assembly Instructions Model: AOGC15151F

Size: px

Start display at page:

Download "Absco Aviary Assembly Instructions Model: AOGC15151F"

Cory Barnett
5 years ago
Views:

50mm 0mm 50mm THIS WILL ENSURE THAT WATER RUN OFF IS KEPT CLEAR FROM YOUR SHE We thank you for choosng an Australan Made Avary.

1 Absco Avary Assembly Instructons FRONT:.52m SIE :.48m HEIGHT:.8m 580 CONCRETE SLAB 620mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EGES OWNWARS BY 0mm. 50mm 0mm 50mm THIS WILL ENSURE THAT WATER RUN OFF IS KEPT CLEAR FROM YOUR SHE We thank you for choosng an Australan Made Avary. For further assstance please vst our detaled nstructonal vdeo lbrary at At ABSCO Industres we are always lookng to be number ONE, so please let us know what you thnk of our nstructons. Feedback makes us better. ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 PAGE

these nstructons n detal to gan a thorough

off all the parts aganst the parts descrbed and

SITE PREPARATION The ste for the avary must be

It s recommended that the avary be set on a 00mm

2 GENERAL INSTRUCTIONS Organc Garden Co. Avary Before commencng any assembly, read through these nstructons n detal to gan a thorough understandng of assembly methods and assocated detals. Unpack the carton and carefully dentfy and check off all the parts aganst the parts descrbed and llustrated on pages three and four. SITE PREPARATION The ste for the avary must be level. It s recommended that the avary be set on a 00mm concrete slab and anchored down approprately (refer page 9 for detals). Anchor sets are not suppled as standard tems wth ths product. TOOLS REQUIRE 3mm 4mm A NOTE ON SAFETY Some parts may have sharp edges. It s advsable to wear gloves when handlng these tems and safety glasses f drllng holes. Sensble shoes are hghly recommended. o not erect your avary n wndy condtons, ensure that the shed s securely anchored to a sold foundaton mmedately after constructon s completed. It s hghly recommended to erect the shed wth two or more people. ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 PAGE 2

3 Organc Garden Co. Avary COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS QTY COMPONENT ESCRIPTION PART No. CHECK QTY COMPONENT ESCRIPTION PART No. CHECK 2 STEEL SHEET 785mm X 773mm 30A 2 CHANNEL L = 53mm 8F 2 STEEL SHEET 592mm X 773mm 43A 2 CHANNEL L = 470mm 70 2 STEEL SHEET 785mm X 73mm 32A 2 CHANNEL L = 470mm 7 STEEL SHEET 585mm X 773mm 54 2 CHANNEL L = 53mm 8E STEEL SHEET 585mm X 773mm 54L 9 CHANNEL L = 72mm STEEL SHEET 585mm X 773mm 54R 2 CHANNEL L = 745mm 72 MESH SHEET 3 220mm X 72mm - 7 JAMB L= 785mm MESH SHEET 590mm X 72mm - JAMB L= 785mm 92 PRE-ASSEMBLE OOR - JAMB L= 72mm 95 2 CHANNEL L = 53mm A LIP TRIM L= 592mm ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 PAGE 3

4 Organc Garden Co. Avary COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS QTY COMPONENT ESCRIPTION PART No. CHECK QTY COMPONENT ESCRIPTION PART No. CHECK FITTINGS AN ACCESSORIES (SEE BELOW) INE-A-CHOOK FEEER & RINKER KIT 200 CONTENTS OF FITTINGS PACKET SELF TAPPING SCREWS OOR PABOLT 22A 00 LARGE FLANGE POP-RIVETS OOR PABOLT HASP ASSEMBLY INSTRUCTIONS 6 SMALL FLANGE POP-RIVETS ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 PAGE 4

5 NO. Organc Garden Co. Avary 8E PAGE 5 VIEW OF ROOF COMPONENTS 88A 43A 43A 8E 88A ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5

6 64 72 RIGHT HAN SIE PANEL FRONT OOR PAGE 6 Organc Garden Co. Avary 70 8F 30A 32A 30A 32A 7 8F 72 54L 7 92 LEFT HAN SIE PANEL R VIEW OF WALL COMPONENTS ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5

Organc Garden Co. Avary ABSCO ASSEMBLY INTROUCTION The snap-tte assembly system locks most permeter channels to all roof and wall sheets wthout the need for tools and fasteners.

To pre-assemble the four wall panels and two roof panels, the permeter channels are secured to the top and bottom of each panel usng the snaptte system, as detaled on the followng pages wherever you

7 Organc Garden Co. Avary ABSCO ASSEMBLY INTROUCTION The snap-tte assembly system locks most permeter channels to all roof and wall sheets wthout the need for tools and fasteners. Where possble, many components have been pre-punched for ease of assembly, wth others requrng 3mm holes to be drlled where requred. To pre-assemble the four wall panels and two roof panels, the permeter channels are secured to the top and bottom of each panel usng the snaptte system, as detaled on the followng pages wherever you see the symbol. HIGH SIE PUSH HIGH SIE HIGH SIE HIGH SIE PUSH After jonng sheets together, poston channel over one end of the sheets, gently tappng t over the snaptte lugs, workng along the sheets to the other end. PUSH Poston sheets on tmbers, trestles or partly over edge of concrete slab. FASTENING SYMBOLS HIGH SIE Jon components together wth one screw at ths locaton only, as some channel sectons have extra holes that are not requred for ths model of garden shed o not jon components together at ths locaton yet, as the screw may obstruct further assembly of other components Pre-drll the hole pror to jonng components together. Many components wll be able to be used as a template to determne drllng locatons ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 Each permeter channel must fnsh flush wth the edges of the sheets. the snap-tte system allows adjustment for ths process by smply tappng the channel along the sheets untl each end s neatly flush. 3mm POP RIVETS (SMALL FLANGE FOR FITTING OOR HINGES) 3mm POP RIVETS (LARGE FLANGE FOR FITTING MESH TO FRAMES) PAGE 7

8 Organc Garden Co. Avary REAR PANEL ASSEMBLY 30A 30A 8F 8F ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 PAGE 8

9 Organc Garden Co. Avary ROOF PANEL ASSEMBLY 43A 43A 8E 88A 88A 8E ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 PAGE 9

10 Organc Garden Co. Avary SIE PANEL ASSEMBLY LEFT HAN SIE 7 72 SMALL PAN THIS SIE 32A SMALL EGE STEP 2. WHEN FITTING THE TOP AN BOTTOM CHANNELS TO THE SHEET AS SHOWN, ENSURE THAT THE PRE-PUNCHE HOLES IN THE CHANNELS ARE LOCATE AT THE RIGHT HAN EN FOR CONNECTING THE REMAINING JAMB AN CORNER MULLION. THE TOP AN BOTTOM CHANNELS WILL EXTEN PAST THE CORNER MULLION BY 3mm. STEP. JOIN THE JAMB AN CHANNEL SECTIONS ( & 72) TOGETHER AT PRE-PUNCHE LOCATIONS TO FORM THE CORNER MULLION. THE CHANNEL SECTION WILL FINISH 20mm SHORT OF THE JAMB AT EACH EN. STEP. STEP 3. SCREW THE FRAME TOGETHER AS SHOWN AT PRE-PUNCHE LOCATIONS. AITIONAL HOLES IN THE JAMB SECTIONS O NOT REQUIRE SCREWS. ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 PAGE 0

11 Organc Garden Co. Avary SIE PANEL ASSEMBLY LEFT HAN SIE (CONTINUE) STEP 4. NOTCHE CORNERS TO 54 BOTTOM OF SHEET LAY THESE SECTIONS OVER THE PANEL AS SHOWN, LOCKING THE SHEET INTO THE BOTTOM CHANNEL. MOVE THE TOP INFILL CHANNEL () INTO POSITION. ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 PAGE 2

12 Organc Garden Co. Avary SIE PANEL ASSEMBLY RIGHT HAN SIE SMALL PAN THIS SIE 54L 32A 7 SMALL EGE STEP. STEP. JOIN THE JAMB AN CHANNEL SECTIONS ( & 72) TOGETHER AT PRE-PUNCHE LOCATIONS TO FORM THE CORNER MULLION. THE CHANNEL SECTION WILL FINISH 20mm SHORT OF THE JAMB AT EACH EN. STEP 2. WHEN FITTING THE TOP AN BOTTOM CHANNELS TO THE SHEET AS SHOWN, ENSURE THAT THE PRE-PUNCHE HOLES IN THE CHANNELS ARE LOCATE AT THE LEFT HAN EN FOR CONNECTING THE REMAINING JAMB AN CORNER MULLION. THE TOP AN BOTTOM CHANNELS WILL EXTEN PAST THE CORNER MULLION BY 3mm. STEP 3. SCREW THE FRAME TOGETHER AS SHOWN AT PRE-PUNCHE LOCATIONS. AITIONAL HOLES IN THE JAMB SECTIONS O NOT REQUIRE SCREWS. ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 PAGE 2

13 Organc Garden Co. Avary SIE PANEL ASSEMBLY RIGHT HAN SIE (CONTINUE) STEP 4. NOTCHE CORNERS TO BOTTOM OF SHEET 54L NOTE: THIS EGE ONLY FOLE AT 90 EGREES. MOVE THE TOP INFILL CHANNEL () INTO POSITION. LAY THESE SECTIONS OVER THE PANEL AS SHOWN, LOCKING THE SHEET INTO THE BOTTOM CHANNEL. ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 PAGE 3

14 Organc Garden Co. Avary FRONT PANEL ASSEMBLY STEP. PARTS REQUIRE: 2) CHANNELS (PART 64) 3) JAMBS (PART ) STEP 2. JOIN ALL SECTIONS TOGETHER, LINING UP EACH JAMB WITH PRE-PUNCHE HOLES LOCATE IN BOTH CHANNEL SECTIONS. 8mm ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 PAGE 4

15 Organc Garden Co. Avary FRONT PANEL ASSEMBLY STEP 3. LOCK THE CHANNEL ON TO THE SHEET AS SHOWN. THE CHANNEL WILL FINISH 30mm IN FROM EACH SIE OF THE SHEET. STEP 4. LAY THESE SECTIONS, ONE AT A TIME, OVER THE FRAME AS SHOWN, LOCKING THE SHEETS INTO THE BOTTOM CHANNEL. (CONTINUE) 54R NOTCHE CORNERS TO BOTTOM OF 92 SHEETS THIS EGE ONLY FOLE AT 90 EGREES. STEP 5. MOVE THE OOR HINGE JAMB (PART 92) INTO POSITION, LOCATING IT "OVER THE TOP" OF THE SHEET (54R) AN SECURING IT TO THE OTHER JAMB (). (THE SCREWS SECURING THE EXISTING JAMB () WILL HAVE TO BE REMOVE AN THEN REPLACE) STEP 6. MOVE THE THREE INFILL CHANNELS INTO POSITION AN SCREW TO THE TOP/BOTTOM CHANNELS WITH TWO SCREWS EACH. ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 PAGE 5

16 Organc Garden Co. Avary FRONT PANEL ASSEMBLY (CONTINUE) STEP 7. LAY THE OOR PANEL IN THE OPEN POSITION ON THE FRAME AS SHOWN. USING THE SMALL FLANGE POP RIVETS, SECURE THE OOR TO THE OOR HINGE JAMB. STEP 8. FOR THE MIRAIL ABOVE THE OOR, JOIN THE JAMB (95) TO THE CHANNEL () AS SHOWN. FIT THE MIRAIL PARALLEL ABOVE THE OOR, TO THE SIE JAMBS WITH SCREWS FROM THE UNERNEATH SIE. 95 ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 PAGE 6

17 Organc Garden Co. Avary WALL PANEL ASSEMBLY SIE WALL PANEL CHANNELS FIT INTO THE NOTCHE FRONT AN REAR WALL PANEL CHANNELS SCREW THE FRONT FRAME CORNER JAMBS INTO THE PRE-PUNCHE HOLES OF THE SIE WALL CORNER MULLIONS. LAP THESE CORNER SHEETS, RILL AN SCREW TOGETHER. ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 PAGE 7

18 Organc Garden Co. Avary FINAL CONSTRUCTION THE ROOF PANEL WILL OVERLAP THE FRONT AN SIE WALLS BY 37mm THERE IS NO OVERHANG OVER THE BACK WALL STEP. LINE UP THE PRE-PUNCHE HOLES IN BOTH THE ROOF SHEETS AN SIE WALL TOP CHANNELS, AN SECURE WITH SCREWS, COMMENCING WITH ONE SCREW IN EACH CORNER FIRST. STEP 2. RILL THROUGH THE SIE OF THE BACK WALL LIP FLASHING INTO THE BACK WALL TOP CHANNEL AN SECURE WITH SCREWS. STEP 3. RILL THROUGH THE FRONT SHEET INTO THE FRONT WALL TOP CHANNEL AN SECURE WITH SCREWS ANCHORING OF SHE LOCATION OF 8 CONCRETE ANCHORS - EACH ANCHOR CONSISTS OF ONE NUT, BOLT, YNABOLT AN STEEL ANGLE - RILL A 0mm HOLE INTO THE WALL SHEET BOLT & NUT STEEL ANGLE WALL SHEET SLAB - RILL A 0mm HOLE INTO THE CONCRETE YNABOLT ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 PAGE 8

19 Organc Garden Co. Avary FITTING OF WIRE MESH ALL MESH SHEETS ARE FITTE TO THE OF THE AVIARY. INSIE WARNING IT IS RECOMMENE THAT NEW GALVANISE MESH SHOUL BE WEATHERE FOR TWO (2) MONTHS OR SCRUBBE WITH A MIL ACIIC SOLUTION SUCH AS VINEGAR, THEN RINSE WITH WATER BEFORE BEING USE IN BIR HOUSING APPLIANCES. INSIE VIEW OF AVIARY THE MESH SHEETS ARE FIXE TO FRAMEWORK USING THE LARGE FLANGE RIVETS SUPPLIE. WORKING FROM INSIE THE AVIARY, LOCATE THE FIRST MESH SHEET OVER THE FRAMEWORK. RILL 3mm HOLES AN FASTEN WITH RIVETS TO THE FRAMEWORK AT 50mm CENTRES. IT IS IMPORTANT TO CONTINUALLY STRETCH THE MESH TO ENSURE A SMOOTH TIGHT FINISH. LOCATE RIVETS AT THE INSIE INTERSECTION OF THE WIRE TO FACILITATE TIGHTENING OF THE MESH AS SHOWN. ORGANIC GAREN CO. ASSEMBLY INSTRUCTION - MOEL: AOGC55F 2/08/5 PAGE 9

Organic Garden Co. Aviary Assembly Instructions Model: AOGC15081FKFD

Organic Garden Co. Aviary Assembly Instructions Model: AOGC15081FKFD Assembly Instructons Model: AOGC508FKF FRONT:.52m SIE : 0.78m HEIGHT:.8m CONCRETE SLAB 880 620mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EGES OWNWARS BY 0mm. 50mm 0mm 50mm THIS WILL ENSURE THAT