Absco Space Saver Shed Assembly Instructions Model: J30082S
|
|
- Bertha Rogers
- 5 years ago
- Views:
Transcription
1 Assembly Instructons FRONT BASE LENGTH: 9ft n SIDE BASE LENGTH: ft n FRONT WALL HEIGHT: 5ft n REAR WALL HEIGHT: 6ft n ft n CONCRETE SLAB 0ft--3 64n CONCRETE SLAB WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED EDGE n DEEP AROUND THE PERIMETER REBATED EDGE CONCRETE SLAB THIS WILL HELP WATER EGRESS FROM THE BASE OF THE SHED 3n WIDE REBATE We thank you for choosng an Australan made shed. For further assstance please vst our detaled nstructonal vdeo lbrary at or contact Customer Support: At ABSCO Industres we are always lookng to be number ONE, so please let us know what you thnk of our nstructons. Feedback makes us better. feedback@absco.com.au ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE
2 GENERAL INSTRUCTIONS Before commencng any assembly, read through these nstructons n detal to gan a thorough understandng of assembly methods and assocated detals. Unpack the carton and carefully dentfy and check off all the parts aganst the parts descrbed and llustrated on pages three, four and fve. SITE PREPARATION The ste for the shed must be level. It s recommended that the shed be set on a 4n concrete slab and anchored down approprately (refer last page for detals). TOOLS REQUIRED OPTIONAL Normal Drlls No.30 and /64n A NOTE ON SAFETY Normal 5/64n Masonry 5/64n Some parts may have sharp edges. It s advsable to wear gloves when handlng these tems and safety glasses f drllng holes. Sensble shoes are hghly recommended. Do not erect your shed n wndy condtons, ensure that the shed s securely anchored to a sold foundaton mmedately after constructon s completed. It s hghly recommended to erect the shed wth two or more people. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE
3 COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS QTY COMPONENT DESCRIPTION PART No. CHECK QTY COMPONENT DESCRIPTION PART No. CHECK 6 CSJ JOINER L= 7-7/8n CSJ THESE COMPONENTS ARE TO BE JOINED TO THESE COMPONENTS L = 4ft n 55AL JOIN >> 55AL L = 4ft n 55AR JOIN >> 55AR L = 4ft n 55CL JOIN >> 55CL L = 4ft n 55CR JOIN >> 55CR L = 4ft n 55BL JOIN >> 55BL L = 4ft n 55BR JOIN >> 55BR L = 4ft n 8BL JOIN >> 8BL L = 4ft n 8BR JOIN >> 8BR 8AL JOIN >> L = 4ft n 8AL 8AR JOIN >> L = 4ft n 8AR ALL SHEETS HAVE PART NO.S LOCATED ON LOWER RIGHT OR UPPER LEFT CORNER OF COLORED SIDE AS SHOWN Part No. Here ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE 3
4 COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS QTY COMPONENT DESCRIPTION PART No. CHECK QTY COMPONENT DESCRIPTION PART No. CHECK STEEL SHEET 6ft n Long ft-6-7 6n Wde 43B 6B L = ft n 6B STEEL SHEET 6ft n Long ft-6-7 6n Wde 43C L = ft-6-7 6n 8J 8J STEEL SHEET 6ft n Long ft-6-7 6n Wde X4L 79A L = 5ft n 79A STEEL SHEET 6ft n Long ft-6-7 6n Wde X4R 58A WITH HINGES L = 5ft-7-9 3n 58A 4 STEEL SHEET 6ft n Long ft-6-7 6n Wde 43D 58B L = 5ft-7-9 3n 58B STEEL SHEET 5ft-0-9 3n Long 34A ft n Wde 4 58C L = ft-6-7 6n 58C STEEL SHEET 5ft-7-9 3n Long ft-6-7 6n Wde A Part No. Here JAMB L= 5ft-0-9 3n 89A STEEL SHEET 5ft-7-9 3n Long B ft-6-7 6n Wde 0 PLASTIC SCREW CAPS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE 4
5 COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS QTY COMPONENT DESCRIPTION PART No. CHECK QTY COMPONENT DESCRIPTION PART No. CHECK 88B LIP TRIM L= ft-0-6n 88B Part No. Here JAMB L= 5ft n 90A 0 Part No. Here JAMB L= 5ft-7-9 3n 89C CONTENTS OF FITTINGS PACKET SELF TAPPING SCREWS 3 DOOR PADBOLT 4 Part No. Here JAMB L= 3ft-8-3 3n 9A A 8 8/3n NYLOC NUT & BOLT SET SECURE TWO PADBOLTS TO DOOR SHEET DOOR PADBOLT HASP 8/3n CSK SCREW & NUT SECURE HINGES TO DOOR DOOR STRAP L: 6.5n A ASSEMBLY INSTRUCTIONS No. 30 & /64n DRILL BIT PHILLIPS HEAD DRIVER BIT ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE 5
6 INSTRUCTIONS FOR JOINING SPLICED S NOTE: THE TEXT MARKED ON ALL PARTS MUST BE SHOWN ON THE SAME SIDE AS EACH OTHER. = = = = CSJ JOIN>> <<JOIN JOIN>> = = J JOIN>> SJ STEP. Poston the channels and the CSJ joner channel so the center of the CSJ s n lne wth the end of each channel to be joned together. STEP. Jon the frst channel to the CSJ by nsertng the center of the CSJ (on an angle) to the end of the channel where the JOIN>> text s marked. Push down one sde of the CSJ untl you hear a 'clck'. = = JOIN>> <<JOIN JOIN>> = <<JOIN = DRILL 4 ( PER A SIDE) HOLES TO SECURE SECTIONS TOGETHER USING NO. 30 DRILL. (THESE SCREWS MAY HAVE TO BE TEMPORARILY REMOVED AND REPLACED DURING LATER ASSEMBLY) STEP 3. Jon the second channel to the CSJ by postonng the <<JOIN end of the channel at the center of the CSJ (on an angle). Push the CSJ nto the channel untl you here a 'clck'. FINISHED The joned channels should now look lke the pcture above wth the CSJ postoned equally nsde of the joned channels. PUSH QTY = 6 pcs. CSJ PUSH CSJ CSJ CSJ HIGH-SIDE CSJ LOW-SIDE 5/3n CSJ 9/3n ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE 6
7 STEP. PRE-ASSEMBLY OF SPLICED S NOTE: JOIN TOGETHER X SECTIONS USING 6 X JOINERS (PART CSJ) X 8AR X 8AL X 55AR X 55AL X 55CR X 55CL NOTE: SOME S HAVE HOLES IN THEM - YOU WILL NEED TO RE-DRILL HOLES ON ANY WHERE THE CSJ JOINING COVERS HOLES ON THE S YOU ARE CONNECTING 55CR 9ft n 8AR 8AL 55CL 55AR 55AL 8BL 55BR 55BL = = = = = x 8A x 55A x 55C x 55B x 8B X 55BR X 55BL 8BR X 8BR X 8BL ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE 7
8 - VIEW OF ROOF COMPONENTS 88B 8A 43D 43D 43D 43D 8A 88B ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE 8
9 55A 43B 55B 43C 90A 43C 43B 6B 9A X4R 89A 34A 89A 9A 8B 79A 8J 55C VIEW OF WALL COMPONENTS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT X4L 34A 6B A 8J B A PAGE 9
10 ABSCO ASSEMBLY INTRODUCTION The snap-tte assembly system locks most permeter channels to all roof and wall sheets wthout the need for tools and fasteners. To pre-assemble the four wall panels and two roof panels, the permeter channels are secured to the top and bottom of each panel usng the snaptte system, as detaled on the followng pages wherever you see the symbol. HIGH SIDE PUSH HIGH SIDE HIGH SIDE HIGH SIDE PUSH After jonng sheets together, poston channel over one end of the sheets, gently tappng t over the snaptte lugs, workng along the sheets to the other end. PUSH Poston sheets on tmbers, trestles or partly over edge of concrete slab. FASTENING SYMBOLS HIGH SIDE Each permeter channel must fnsh flush wth the edges of the sheets. the snap-tte system allows adjustment for ths process by smply tappng the channel along the sheets untl each end s neatly flush. Jon components together wth one screw at ths locaton only, as some channel sectons have extra holes that are not requred for ths model of garden shed 8/3n NUT & BOLT SET Once constructed place screw caps over fasteners Do not jon components together at ths locaton yet, as the screw may obstruct further assembly of other components ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE 0
11 . REAR PANEL ASSEMBLY LAY SHEETS OUT AS SHOWN 43C 43B 43C 43B 55B 8B ATTACH 55B WITH NOTCHED END AS SHOWN ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE
12 . SIDE PANEL ASSEMBLY (TWO REQUIRED) 6B LAY SHEETS OUT AS SHOWN X4R X4L 8J ATTACH 6B WITH NOTCHED END AS SHOWN ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE
13 3. ROOF PANEL ASSEMBLY LAY SHEETS OUT AS SHOWN 43D 43D 43D 8A 43D 88B 8A 88B ATTACH LIPS 88B AS SHOWN. LIPS SHOULD OVERLAP ROOF 8A. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE 3
14 4. DOOR PANEL ASSEMBLY 58C ATTACH 58C S AS DESCRIBED ON PAGE 0 58C 58A 58B B A A 58C 58A 58C 89C ATTACH 89C WITH COLORED SIDE FACING OUT. ATTACH 58A AND 58B TO SHEET B SO THAT THE 5/3n SIDE OF THE S ARE ON THE OUTSIDE OF SHEET B B A 5/3n FLANGE 9/3n FLANGE ENSURE 58C OUTER FLANGE SITS OVER UPRIGHT FLANGE FOUR HOLE SET FOR PADBOLT CONNECTION ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE 4
15 5. FRONT PANEL ASSEMBLY 89A LAY SHEETS OUT AS SHOWN 89A 34A 34A NOTCH ON JAMB 90A FITS OVER JAMB 89A AND 89B AND NOTCH ON 89B AND 89A FITS OVER 55A 55A 90A 89A 55A DO NOT INSTALL THIS SCREW (OR THE TOP EQUIVALENT) UNTIL S 77A AND 55C ARE INSTALLED 90A 79A 55C 55A 89A 79A 55C NOTCH ON JAMB 89A AND 89B FITS OVER 55C AND 79A INSERTS INTO 55C WITH SHORTEST SIDE FACING OUT. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE 5
16 6. DOOR PANEL ASSEMBLY 9A 9A INSERT 9A JAMBS UNDER THE S AROUND THE DOOR B A NOTE: 8/3n CSK Nuts and bolts (suppled) wll requre enlargng the hnge hole usng a /64n drll bt USE 4 x 8/3n NYLOC BOLTS TO SECURE PADBOLT TO DOOR NOTE: The two holes requred to connect the padbolt hasp for each door have not been pre-punched, to allow for proper algnment. poston each hasp centrally over the padbolt shaft, and drll holes wth No. 30 Drll and secure wth screws ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE 6
17 PANEL CONSTRUCTION NOTE: Take care to ensure that both front and rear wall panels are not postoned upsde down. The top channel of each panel s pre-punched for attachng roof sheets. The base channels are not pre-punched. SIDE WALL PANEL S FIT INTO THE NOTCHED FRONT AND REAR WALL PANEL S ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE 7
18 FINAL CONSTRUCTION ANCHORING OF SHED LOCATION OF 8 CONCRETE ANCHORS - EACH ANCHOR CONSISTS OF ONE NUT, BOLT, DYNABOLT AND STEEL ANGLE - DRILL A 5/64n HOLE INTO THE WALL SHEET - DRILL A 5/64n HOLE INTO THE CONCRETE BOLT & NUT STEEL ANGLE DYNABOLT WALL SHEET SLAB ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J3008S 4/08/4 CUSTOMER SUPPORT PAGE 8
Absco Space Saver Shed Assembly Instructions Model: 23081SK
Assembly Instructons Model: 2308SK FRONT BASE LENGTH: 2.26m SIDE BASE LENGTH: 0.78m FRONT WALL HEIGHT:.80m REAR WALL HEIGHT:.95m CONCRETE SLAB 880mm 2360mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm
More informationAbsco Workshop Shed Model: 45302WK
Absco Workshop Shed Model: FRONT: 4.48m SIDE: 3.0m HEIGHT: 2.m CONCRETE SLAB 300mm 4580mm CONCRETE WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED EDGE 25mm DEEP AROUND THE PERIMETER 00mm REBATED
More informationAbsco EZISLIM Shed Model: 08151F
FRONT: 0.78m SIDE: 1.52m HEIGHT: 1.80m CONCRETE SLAB 1620mm 880mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES DOWNWARDS BY 10mm. 50mm 10mm 50mm THIS WILL ENSURE THAT WATER RUN OFF IS KEPT CLEAR
More informationAbsco Pool Pump Cover Assembly Instructions Model: PPCK
Cover Assembly Instructons Model: PPCK EXTERNAL BASE DIMENSIONS: 520mm x 520mm EXTERNAL REAR WALL HEIGHT: 490mm EXTERNAL FRONT WALL HEIGHT: 220mm RECOMMENDED CONCRETE SLAB SIZE: 620mm x 620mm x 00mm THICK
More informationAbsco Space Saver Shed Assembly Instructions Model: J30082S
Assembly Instructions FRONT BASE LENGTH: 9' 0 7 64" SIDE BASE LENGTH: ' 6 45 64" FRONT WALL HEIGHT: 5' 0 55 64" REAR WALL HEIGHT: 6' 4 49 64" CONCRETE SLAB ' 0 4 64" 0' 3 64" CONCRETE SLAB WHEN LAYING
More informationOrganic Garden Co. Aviary Assembly Instructions Model: AOGC15081FKFD
Assembly Instructons Model: AOGC508FKF FRONT:.52m SIE : 0.78m HEIGHT:.8m CONCRETE SLAB 880 620mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EGES OWNWARS BY 0mm. 50mm 0mm 50mm THIS WILL ENSURE THAT
More informationAbsco Aviary Assembly Instructions Model: AOGC15151F
Absco Avary Assembly Instructons FRONT:.52m SIE :.48m HEIGHT:.8m 580 CONCRETE SLAB 620mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EGES OWNWARS BY 0mm. 50mm 0mm 50mm THIS WILL ENSURE THAT WATER
More informationAbsco Premier Garden Shed Assembly Instructions Model: J30302G
Absco Premier Garden Shed Assembly Instructions FRONT: 9ft-0-7 64in SIDE: 9ft-0-7 64in HEIGHT: 6ft-0-43 64in 0ft--3 64in CONCRETE SLAB 0ft--3 64in CONCRETE SLAB WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE
More informationAbsco Premier Garden Shed Assembly Instructions Model: J30302G
Absco Premier Garden Shed Assembly Instructions FRONT: 9' 0 7 64" SIDE: 9' 0 7 64" HEIGHT: 6' 0 43 64" 0' 3 64" CONCRETE SLAB 0' 3 64" CONCRETE SLAB WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED
More informationAbsco Regent Shed Assembly Instructions Model: J30372R
Absco Regent Shed Assembly Instructions FRONT: 9ft-0-7 64in SIDE: ft-3 3in HEIGHT: 6ft-0-43 64in ft-4-3in CONCRETE SLAB 0ft--3 64in CONCRETE SLAB WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED
More informationAbsco Premier Garden Shed Assembly Instructions Model: 23231GK
Absco Premier Garden Shed Assembly Instructions Model: 33GK FRONT:.6m SIDE:.6m HEIGHT:.00m 360mm CONCRETE SLAB 360mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES DOWNWARDS BY 0mm. 50mm 0mm 50mm
More informationAbsco Space Saver Shed Assembly Instructions Model: 15081S
Assembly Instructions FRONT BASE LENGTH:.5m SIDE BASE LENGTH: 0.78m FRONT WALL HEIGHT:.8m REAR WALL HEIGHT:.95m CONCRETE SLAB 60mm 880mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES DOWNWARDS
More informationPremier Garden Shed Assembly Instructions Model: J30232GK
Assembly Instructons Model: J303GK 360mm (7.7") CONCRETE SLAB 300mm (0.7'') FRONT: 3.0m (9.84") SIDE:.6m (7.4") HEIGHT:.m (6.88") WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES DOWNWARDS BY 0mm
More informationAbsco Workshop Shed Model: 45232WK
FRONT: 4.48m SIDE:.6m HEIGHT:.00m CONCRETE SLAB 360mm 4580mm CONCRETE WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED EDGE 5mm DEEP AROUND THE PERIMETER 00mm REBATED EDGE CONCRETE SLAB THIS WILL
More informationAbsco Premier Garden Shed Assembly Instructions Model: 30302GK
Absco Premer Garden Shed Assembly Instructons FRONT: 3.0m SIDE: 3.0m HEIGHT:.m 300mm CONCRETE SLAB 300mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES DOWNWARDS BY 0mm. 50mm 0mm 50mm THIS WILL
More informationAbsco Regent Garden Shed Assembly Instructions Model: 30372RK
Shed Assembly Instructons Model: 3037RK FRONT: 3.0m SIDE: 3.66m HEIGHT:.m 3760mm CONCRETE SLAB 300mm CONCRETE WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED EDGE 5mm DEEP AROUND THE PERIMETER
More informationAbsco Industries Workshop Shed Model: 60303WK
FRONT: 5.96m SIDE: 3.00m HEIGHT:.0m CONCRETE SLAB 300mm 6060mm WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED EDGE 5mm DEEP AROUND THE PERIMETER THIS WILL HELP WATER EGRESS FROM THE BASE OF
More informationAbsco Highlander Shed Model: 3045HK
FOR CONSTRUCTION IN NON-CYCLONIC AREAS WIND RATING: W33N (N2) FRONT: 3.0 m SIDE: 4.48m HEIGHT: 2.3 m CONCRETE SLAB 300mm 4580mm CONCRETE WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED EDGE 25mm
More informationAbsco Aviary Assembly Instructions Model: A15301FK
Absco Avary Assembly Instructons Model: A15301FK FRONT: 1.52m SIE : 2.96m HEIGHT: 1.8m 3060mm CONCRETE SLAB 1620mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EGES OWNWARS BY 10mm. 50mm 10mm 50mm
More informationINSTRUCTION MANUAL J23232GK
We thank you for choosing an Australian Made Shed. For further assistance please visit our detailed instructional video library at Http://www.abscosheds.com.au/watch-videos At ABSCO Industries we are always
More informationAbsco Aviary Assembly Instructions Model: A23231G
Absco Aviary Assembly Instructions Model: A23231G FRONT: 2.26m SIDE : 2.22m HEIGHT: 1.96m WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES DOWNWARDS BY 10mm. 50mm 10mm 50mm THIS WILL ENSURE THAT
More informationS H E D A S S E M B L Y I N S T R U C T I O N S
T I T A N R A N G E S H E D A S S E M B L Y I N S T R U C T I O N S 8 X 10 ft Approx = 2550 x 3140 cm COMPONENT LIST Component illustrations are given as a visual guide only and are not in proportion PART
More informationS H E D A S S E M B L Y I N S T R U C T I O N S
T I T A N R A N G E S H E D A S S E M B L Y I N S T R U C T I O N S 6 X 4ft = 190 x 150 cm 6 X 6ft = 190 x 190 cm 6 X 8ft = 190 x 255 cm COMPONENT LIST Component illustrations are given as a visual guide
More informationINSTRUCTIONS FOR ASSEMBLY 2355mm x 3125mm Workshop
Manufacturer of Christie Glasshouses and Sheds INSTRUCTIONS FOR ASSEMBLY 2355mm x 3125mm Workshop 1 Thomas Burns Street, Dunedin Phone (03) 477 7909 www.allans.co.nz Congratulations on your purchase of
More informationMODEL No: GSS3030G. Model No:...GSS3030G Overall Size (W x D X H*) x 3000 x 2100mm Roof Type:...Gable *Minimum Wall Height
1. SAFETY INSTRUCTIONS INSTRUCTIONS FOR: GALVANIZED STEEL SHED GREEN 3 x 3 x 2.1m MODEL No: GSS3030G Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used
More informationE N G L I S H GARDEN SHED. Assembly Instructions. Suitable for Models WITH VARYING DEPTHS
GARDEN SHED Assembly Instructions Suitable for Models 6' Wide 8' Wide 0' Wide WITH VARYING DEPTHS GI0003 November 0 INSTALLATION ADVICE It's Not That Difficult! The construction of your shed isn't as complicated
More informationINSTRUCTIONS FOR ASSEMBLY 2355mm x 4665mm Workshop
Manufacturer of Christie Glasshouses and Sheds INSTRUCTIONS FOR ASSEMBLY 2355mm x 4665mm Workshop 1 Thomas Burns Street, Dunedin Phone (03) 477 7909 www.allans.co.nz Congratulations on your purchase of
More informationIt is important that you contact your local government authority to determine if building approval is required.
HANDI-MATE SHED HANDI-MATE LOCKER INSTALLATION GUIDE INSTALL GUIDE BEFORE YOU START PRIOR TO INSTALLATION It is important that you contact your local government authority to determine if building approval
More informationEnglish/French 06/04
E000 PLEASE READ ASSEMBLY INSTRUCTIONS COMPLETELY BEFORE ASSEMBLING YOUR BUILDING CAUTION: Some parts have sharp edges. Care must be taken when handling the various pieces to avoid a mishap. For safety
More informationASSEMBLY INSTRUCTIONS SS2520. BASE SIZE: 2.520m x 2.020m
ASSEMBLY INSTRUCTIONS SS50 BASE SIZE:.50m x.00m CONGRATULATIONS ON PURCHASING A SMART STORE SHED. BEFORE YOU BEGIN THE ASSEMBLY PLEASE NOTE SOME IMPORTANT POINTS: BEFORE YOU START: Read all instructions
More informationSteelChief Installation Instructions for pre-assembled panel form sheds GABLE ROOF
SteelChief Installation Instructions for pre-assembled panel form sheds GABLE ROOF Please read fully before commencing work...any queries will be promptly answered, contact theboss@steelchief.com.aui MPORTANT
More informationINSTRUCTIONS FOR: GALVANIZED STEEL SHED 3 x 3 x 2.1mtr. MODEL No: GSS3030
INSTRUCTIONS FOR: GALVANIZED STEEL SHED 3 x 3 x 2.1mtr MODEL No: GSS3030 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
More informationASSEMBLY INSTRUCTIONS GG77. BASE SIZE: 2.190m x 2.020m
ASSEMBLY INSTRUCTIONS GG77 BASE SIZE: 2.190m x 2.020m CONGRATULATIONS ON PURCHASING A DURATUF GUARDIAN SHED. BEFORE YOU BEGIN THE ASSEMBLY PLEASE NOTE SOME IMPORTANT POINTS: BEFORE YOU START: Read all
More informationModel No. EP84-A, EP84AR-A, P84L
E000 Model No. EP84-A, EP84AR-A, P84L PLEASE READ ASSEMBLY INSTRUCTIONS COMPLETELY BEFORE ASSEMBLING YOUR BUILDING CAUTION: Some parts have sharp edges. Care must be taken when handling the various pieces
More informationInstallation Manual for Metal Emperor Lockers
P a g e 1 Table of Contents Page General Notes and Tools Required 2-3 Assemble Shelves with Coat Hooks/Coat Rods 4 Fastening Chart 5 Knock Down Locker Assembly (Banks of Three) 6-12 Appendix A: Dress End
More informationASSEMBLY INSTRUCTIONS SS2010. BASE SIZE: 2.020m x 1.020m
ASSEMBLY INSTRUCTIONS SS010 BASE SIZE:.00m x 1.00m CONGRATULATIONS ON PURCHASING A SMART STORE SHED. BEFORE YOU BEGIN THE ASSEMBLY PLEASE NOTE SOME IMPORTANT POINTS: BEFORE YOU START: Read all instructions
More informationTrack Rack. * Track Racks are not lockable
The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply
More informationGALVANIZED SHED GREEN 2.3 X 2.3 X 1.9m
INSTRUCTIONS FOR: GALVANIZED SHED GREEN 2.3 X 2.3 X 1.9m MODEL NO: GSS2323G Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
More informationHANDI-MATE SHED BEFORE YOU START INSTALL GUIDE HINGED DOOR HANDI-MATE INSTALLATION GUIDE PRIOR TO INSTALLATION
HANDI-MATE SHED HINGED DOOR HANDI-MATE INSTALLATION GUIDE INSTALL GUIDE BEFORE YOU START PRIOR TO INSTALLATION It is important that you contact your local government authority to determine if building
More informationC O N C E A L E D F I X I N G. PH:
C O N C E A L E D I X I N G D I Y S l a t Systems PH: 1300 336 237 Alumnum Concealed xng Slat Systems Our Concealed xng Alumnum Slat range offers the latest n archtectural style combned wth a unque nstall
More informationINSTALLING YOUR NEW SPRING LIFT ARM KIT
INSTALLING YOUR NEW SPRING LIFT ARM KIT 1. Measure the distance that the roof is to be raised. [If your lift system is completely non-functional, you will need to calculate or estimate this distance as
More informationASSEMBLY INSTRUCTIONS GL75. BASE SIZE: 2.190m x 1.520m
ASSEMBLY INSTRUCTIONS GL75 BASE SIZE: 2.190m x 1.520m CONGRATULATIONS ON PURCHASING A DURATUF GUARDIAN SHED. BEFORE YOU BEGIN THE ASSEMBLY PLEASE NOTE SOME IMPORTANT POINTS: BEFORE YOU START: Read all
More informationALL SEASON PATIO COVER
ALL SEASON PATIO COVER 61 Where the All Season Patio Cover is to be attached to the home, create a level line showing where the top of the mounting rail is to be located. Install each section with the
More informationASSEMBLY INSTRUCTIONS FOR STORETTE STA42
ASSEMBLY INSTRUCTIONS FOR STORETTE STA42 A01 CAUTION: Some parts have sharp edges. Care must be taken when handling the various pieces to avoid a mishap. For safety sake, please read the safety information
More informationDura-Lock Roof System
DLR-14 Dura-Lock Roof System Assembly and Installation Instructions Read the instructions before starting the job. They explain the steps required to produce a finished product that will meet factory specifications.
More informationASSEMBLY INSTRUCTIONS
GARDEN SHED 6X5ft B/C 9400988362649 GARDEN SHED 6X7ft B/C 9400988362656 GARDEN SHED 6X9ft B/C 9400988362663 GARDEN SHED 6X1 B/C 9400988362670 111 ft ASSEMBLY INSTRUCTIONS Product specifications may change
More informationGM3015 ASSEMBLY. 1 cardboard package 1 channel pack. Tools supplied: 1 Riveter 3.3mm double ended drillbit. Tools required: Tape measure Ladder
M3015 SLOPIN ROO SHED 3030mm wide x 1530mm deep x 1980-1830mm high 25 YER WRRNTY SSEMBLY INSTRUCTION DVD WITH LL SHEDS SSEMBLY INSTRUCTIONS You should have two packages: 1 cardboard package 1 channel pack
More informationGALVANIZED STEEL SHED 1510 x 1510 x 1900mm
INSTRUCTIONS FOR: GALVANIZED STEEL SHED 1510 x 1510 x 1900mm MODEL No s: GSS1515.V2, GSS1515G.V2 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according
More informationINSTRUCTIONS FOR: GALVANIZED STEEL SHED GREEN 1.5 x 0.8 x1.5m
INSTRUCTIONS FOR: GALVANIZED STEEL SHED GREEN 1.5 x 0.8 x1.5m MODEL NO: GSS150815G Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
More informationPRE-ENGINEERED HORSE STALL SYSTEMS SDFD SLIDING DOOR c/w FOLD-DOWN GRILL. & Assembly. Installation Instructions
PRE-ENGINEERED HORSE STALL SYSTEMS 4800 SDFD SLIDING DOOR c/w FOLD-DOWN GRILL & Assembly Installation Instructions 4800 SDFD Sliding Door c/w Fold-Down Grill Components - 1 3 /4" x 2" x 88" channels (2)
More informationGALVANIZED SHED 2.3 X 2.3 X 1.9M
INSTRUCTIONS FOR GALVANIZED SHED 2.3 X 2.3 X 1.9M MODEL NO: GSS2323 & GSS2323G Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
More informationINSTRUCTION SHEET U19
U19 All Refrigerator and All Freezer Trim Kit Installation Product Line: U19 All Refrigerator and All Freezer Models Parts Included in Kit TRIMKITEZ1 (Part# 297333500): Single Trim Kit Components Single
More informationSafety Glasses Safety Gloves Ladders Measuring Tape Spirit Level String Line. Tin-Snips Rivet Gun Caulking Gun Silicone Socket Set
BEFORE YOU START Carefully read these instructions and refer to them constantly during each stage of construction. If you do not have all the necessary tools or information, contact Stratco for advice.
More informationGM1511 ASSEMBLY. 1 cardboard package. Tools supplied: 1 Riveter 3.3mm double ended drillbit. Tools required: Tape measure Ladder
GM1511 SLOPING ROO SHD 1530mm wide x 1080mm deep x 1830-1770mm high 25 YAR WARRANTY ASSMLY INSTRUCTION DVD WITH ALL SHDS ASSMLY INSTRUCTIONS You should have one package: 1 cardboard package Tools supplied:
More informationAssembly Instructions
10' and 12' Octagon Cedar Gazebo Assembly Instructions Toll Free: 866.768.8465 Hours: 9-5 Monday-Friday EST www.homeplacestructures.com Package ships as shown revised 06/20/09 Cedar Gazebo Assembly Instructions
More informationGALVANIZED STEEL SHED 1.5 x 0.8 x 1.5M
INSTRUCTIONS FOR GALVANIZED STEEL SHED 1.5 x 0.8 x 1.5M MODEL NO: GSS150815G Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
More informationMelamine Plastic Laminate. Toilet Partition Installation Manual
Melamine Plastic Laminate Toilet Partition Installation Manual PHONE: FAX: 1-866-317-2786 ATTENTION DO NOT MIX FASTENER PACKS EACH FASTENER PACK HAS THE NECESSARY BOLTS, BARRELS AND SCREWS TO INSTALL THE
More informationPINEHAVEN SHEDS Assembly Instructions FOR LEAN-TO SHEDS
PINEHAVEN SHEDS Assembly Instructions FOR LEAN-TO SHEDS GARDEN PRODUCTS www.pinehavensheds.co.nz 5/16 hex drive bit, By asking about our products at your nearest DIY or gardening store www.pinehavensheds.co.nz
More informationInstallation Guidelines
Page 1 Tools You ll Need 4 ft. Carpenter s level Chalk line (to mark U channel locations) Cordless drill/nut driver Caulking gun Chop saw with a metal cutting blade on it (required to make accurate and
More informationRUN-IN SHED INSTRUCTIONS
RUN-IN SHED INSTRUCTIONS 14321 5th Line Nassagaweya, Rockwood, ON, N0B 2K0 Phone 519-856-9959 ~ Fax 519-856-4141 Toll Free 1-800-461-3362 ~ Email sales@systemhorse.com Website www.systemfence.com RUN-IN
More information1.6M X 2.4M GARDEN SHED ASSEMBLY INSTRUCTIONS EZ-16242
.6M X.4M GARDEN SHED ASSEMBLY INSTRUCTIONS EZ-64 Congratulations on purchasing your new proudly South African eazished. Before commencing the assembly, we recommend that you read the instructions thoroughly.
More informationINSTRUCTIONS FOR: GALVANIZED STEEL SHED MODEL No: GSS1515
INSTRUCTIONS FOR: GALVANIZED STEEL SHED MODEL No: GSS1515 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
More informationGALVANIZED STEEL SHED GREEN 1.5 X 1.5 X 1.9M
INSTRUCTIONS FOR: GALVANIZED STEEL SHED GREEN 1.5 X 1.5 X 1.9M MODEL NO: GSS1515G Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
More informationFLAT ROOF CARPORT RECOMMENDED INSTRUCTION MANUAL
FLAT ROOF CARPORT RECOMMENDED INSTRUCTION MANUAL Table of Contents Introduction... 2 Components... 3 Step 1 Marking out the Perimeter of the Carport... 3 Step 2a Footing Set-Out for Concrete Block Pad
More informationINSTRUCTIONS FOR: GALVANIZED STEEL SHED MODEL No: GSS1508
INSTRUCTIONS FOR: GALVANIZED STEEL SHED MODEL No: GSS1508 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
More informationOwner's Manual & Assembly Instructions
Owner's Manual & Assembly Instructions XZ0 Model No. GSA83 76300 Storage Area: 3 Sq. Ft. Cu. Ft., m 3,5 m 3 BUILDING DIMENSIONS * Size rounded off to the nearest foot CAUTION: SOME PARTS HAVE SHARP EDGES.
More informationPotting Store Assembly Instructions
Before assembly We recommend that time is taken to read the instructions before starting assembly, then follow the easy step by step guide. The instruction sheet is only a guide to the assembly. Certain
More informationINSTALLATION GUIDE. Flat Roof Homesheds TM. Onto Concrete BEFORE YOU START TOOLS REQUIRED
INSTALLATION GUIDE Flat Roof Homesheds TM Onto Concrete BEFORE YOU START It is important to check your Local Government Authority requirements before the installation of your new Stratco Flat Roof Homeshed.
More information11 6 Round Building Assembly Instructions
11 6 Round Building Assembly Instructions 11 6 Round Building Hardware List 1. Pro Rib Brite White 36 Wide X 68 Long (Siding Steel) 11 2. Top Wall Wheel Ring 3 3. Base Ring 3 4. 1 ½ X 68 Aluminum Tubes
More informationAssembly Instructions
Unite Panel System Hinge Door July 2016 #12 x / slotted hex washer head bolt Figure 1 threshold bracket frame Detail F threshold bracket threshold bracket (installed) #12 x / slotted hex washer head bolt
More informationInstallation Manual for Metal Toilet Partitions Elite & Elite Plus Series
P a g e 1 Table of Contents Page General Notes and Tools Required 3 STEP 1: Establish Floor Bracket Locations 4 STEP 2: Fasten Floor Brackets 4 & 5 STEP 3: Erect Panels 6 STEP 4: Erect Wall Pilaster 7
More information8x12 SpaceMaker Garden Shed Assembly Manual
8x12 SpaceMaker Garden Shed Assembly Manual Version #6 Revised June / 2007 Thank you for purchasing a 8x12 SpaceMaker Garden Shed. Please take the time to identify all the parts prior to assembly. Safety
More informationInstallation Manual for Metal Toilet Partitions Standard Series
For Video instructions http://www.hadrian-inc.com/tech-data/installation/toilet-partitions.aspx P a g e 1 Table of Contents Page General Notes and Tools Required 3 STEP 1: Establish Floor Bracket Locations
More informationInstallation Instructions
Installation Instructions 000964 Revision F Installation Instructions for PIRIT Read this manual fully prior to starting installation. Call American eating Customer ervice with any questions. What you
More informationBefore Assembling the Storage Wall
Chapter 1 Assembling the Lista Storage Wall Lista provides two types of standard Storage Walls: B251 and B255. The design, construction, assembly, and quality are identical for both types, however, B251
More informationRLZ-02 - Rear Cross Bar, Ford Transit Connect.
Important: Please read these instructions carefully prior to installation. Please refer to your fitting instruction to ensure that the roof racks are installed in the correct locations. Check the contents
More information8' x 7' Vinyl Storage Shed
8' x 7' Vinyl Storage Shed Model #S-8070-A Storage Shed Owner s Manual 8' x 7' (2.44m x 2.14m) PLEASE READ OWNER S MANUAL COMPLETELY BEFORE ASSEMBLING YOUR BUILDING. ALL STATED SIZES ARE NOMINAL DIMENSIONS.
More informationFrameless Bypass Slider
INSTALLATION INSTRUCTIONS Frameless Bypass Slider QCI-5301 Heavy Glass Bypass Slider with Exposed Rollers QCI5301 Rev 0 Page 1 Certified 11/1/2016 Tools: To install your New Shower Enclosure, you may need
More informationTaurean Sectional Garage Door INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN MAKE SURE THESE INSTRUCTIONS ARE READ AND UNDERSTOOD COMPLETELY. THESE INSTRUCTIONS ARE INTENDED FOR PROFESSIONAL GARAGE DOOR INSTALLERS. ALL REFERENCES ARE TAKEN FROM THE INSIDE LOOKING
More informationGardenShed 2.3W x 2.3D x 2.4Hm
GardenShed 2.3W x 2.3D x 2.4Hm 2.3m Gable Series Assembly instructions Congratulations on purchasing your new Pinnacle garden shed. Before assembling, we recommend you read the instructions thoroughly.
More informationBEST PRACTICE GUIDE. Socket Bases. Working with Concrete Slabs
Working with Concrete Slabs When working with concrete slabs the barrier protection can be erected in three ways - with socket bases, adjustable slab edge brackets and multi slab clamps. Socket Bases 1
More informationBest Barns USA. the Danbury - R 8' x 12' Assembly Book. Revised September 30, 2016
Best Barns USA Assembly Book Revised September 30, 2016 the Danbury - R 8' x 12' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.
More informationBest Barns USA. the Danbury 8' x 12' Assembly Book. Revised February 17, 2017
Best Barns USA Assembly Book Revised February 17, 2017 the Danbury 8' x 12' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive, Greenville, PA 16125 This manual is copyrighted. Under the
More informationAWNING / PATIO COVER INSTALLATION INSTRUCTIONS
AWNING / PATIO COVER INSTALLATION INSTRUCTIONS Before You Begin Read the installation instructions thoroughly before beginning the installation procedure. Perspective In the Awning Instructions, Back means
More informationAssembly and Installation Guide
The Easy Hang Closet Solution SM Install Your elfa In An Instant. Enjoy The Benefits For A Lifetime. Basic Tools For elfa Assembly and Installation Level Hand or Power Drill Drill Bits 1/8", 3/8", 5/16"
More informationCall (770) STEP 6: Caulk bolt hole within the bracket for protection from the elements.
Call (770) 777 7007 Structural Deck Support System: Product Numbers: H1-GQ, H2-GCL (Also applies to H1-GK and H2-GCR) STEP 1: Following the spacing guidelines per the deck design and joist layout, mark
More informationOwner's Manual & Assembly Instructions
Owner's Manual & Assembly Instructions PK01 BASE KIT Model No. FDN106 71706011 CAUTION: SOME PARTS HAVE SHARP EDGES. CARE MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES TO AVOID A MISHAP. FOR SAFETY SAKE,
More informationAssembly instructions. 6x4. Model GH1354A. 6x6. Model GH1357A. 6x8. Model GH1360A. 6x10. Walk-in Greenhouse. Model GH1363A
ssembly instructions x Model GH x Model GH7 x8 Model GH0 x0 Model GH Walk-in Greenhouse Statement ear Customer! May we congratulate you on your new Greenhouse. We feel sure that by following the detailed
More informationDouble Beam Freestanding Pergola Installation Guide
Double Beam Freestanding Pergola Installation Guide Patent Pending. Copyright 2011 USAVinyl, LLC - All Rights Reserved The information contained in these instructions are proprietary to USAVinyl, LLC and
More informationSTRATCO GABLE HOMESHED STRATCO GABLE HOMESHEDS STUBBIE INSTALLATION GUIDE
STRATCO GABLE HOMESHED STRATCO GABLE HOMESHEDS STUBBIE INSTALLATION GUIDE INSTALL GUIDE BEFORE YOU START COUNCIL APPROVAL It is important that you have local council approval before building your Stratco
More informationInstallation Guidelines
Page 1 Tools You ll Need 4 ft. Carpenter s level Chalk line (to mark U channel locations) Cordless drill/nut driver Caulking gun Chop saw with a metal cutting blade on it (required to make accurate and
More informationInstallation Instructions
Installation Instructions For Models: Model Number / Description File Name 1540 Classic Series P-Lam Toilet Partitions 1540.pdf 1 INSTALLATION INSTRUCTIONS LAMINATED PLASTIC TOILET PARTITIONS 1540 Classic
More informationKawasaki Teryx 750 Cab Kit* Caution: Before using this product, read this manual and follow all Safety Instructions.
Owner s Manual Model: Kawasaki Teryx 750 Kawasaki Teryx 750 Cab Kit* Caution: Before using this product, read this manual and follow all Safety Instructions. Safety Instructions Cab Kit Contents Hardware
More informationBest Barns USA Assembly Book
Best Barns USA Assembly Book Revised February 17, 2015 the Meadowbrook-R 12' x 10' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.
More informationAssembly Book. 10' x 16' the Cambridge II. revised July 15, 2014
Assembly Book revised July 15, 2014 the Cambridge II 10' x 16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted. Under the
More informationGROWING BETTER THROUGH DESIGN. 6ft Lean-To LEAN-TO. Assembly Instructions 04/02
GROWING BETTER THROUGH DESIGN 6ft Lean-To LEAN-TO Assembly Instructions 04/02 6ft Lean-To Greenhouse Base Plan Introduction/Tools/Contents / / Contents This is a copy of our Lean-To greenhouse base plan.
More informationParts list Instruction guide Warnings Please read carefully before assembling and using product.
Parts list Instruction guide Warnings Please read carefully before assembling and using product. Jet Rail XL Part Number 27377 Tools required for assembly Hammer 9/16 Wrench 3/4 Wrench Ratchet 9/16 Socket
More informationBest Barns USA Assembly Book
Best Barns USA Assembly Book Revised September 19, 2016 the Meadowbrook-R 16' x 10' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is
More informationJoiner Kit For Models N388, C450, E402B, E411T, E415H, E440T, E442B, E521T and E522B
Joiner Kit For Models N388, C450, E402B, E411T, E415H, E440T, E442B, E521T and E522B KIT COMPONENTS Part Illustration Description Rear Bracket Front Lower Bracket Front Upper Bracket KIT APPLICATION This
More informationBest Barns USA Assembly Book
Best Barns USA Assembly Book Revised September 19, 2016 the Meadowbrook-R 12' x 10' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is
More information