B Range Faucet. T&S Brass and Bronze Works, Inc. Travelers Rest, South Carolina
|
|
- Harry Greene
- 5 years ago
- Views:
Transcription
1 B-0575 Range Faucet 1 Piece, Swivel O-Ring, (.103 C/S x.206 I.D.) Dyanmic Bearing Spring, O-Ring Brg Nut, Swivel O-Ring, Center Body O-Ring, (.070 C/S x.364 I.D.) Nozzle Adapter, 1/8" Female Aerator B
2 B-0576 Range Faucet Assembly 1 Piece, Swivel O-Ring,.103 C/S x.206 I.D Dyamic Bearing Spring, O-Ring Bearing Nut, Swivel O-Ring, Center Body O-Ring,.070 C/S x.364 I.D Nozzle Adapter, 1/8" Female x Aerator Male Aerator B
3 B-0580 Pot Filler Assembly 1 Asm, Double joint Nozzle Asm, Nozzle, 12", Back Section Washer Sleeve O-Ring Asm, Nozzle, 6", Front Section Washer Sleeve O-Ring Asm, Out 035A 11 O-Ring,.739 x Spout Body, Spout Set Screw, Handle Body Flange
4 B-0590 Pot Filler Assembly 1 Asm, Double Jet Nozzle Body, Spout Asm, Nozzle, 12", Back Section Set Screw, Handle Washer Asm, Base Faucet B Sleeve Asm, Spindle Eterna O-Ring Body, Faucet Asm, Nozzle, 6", Front Section Locknut Washer Washer Sleeve Handle, Lever O-Ring Index, Button - Blue/Cold Asm, Out 035A 22 Screw, Handle O-Ring,.739 x Tailpiece Spout Nut, Tailpiece
5 B-0592 Faucet Assembly 1 Asm, Double Jet Nozzle O-Ring,.739 x Asm, Nozzle, 12", Back Section Spout Washer Body, Spout Sleeve Set Screw, Handle O-Ring Asm, Base Faucet B Asm, Nozzle, 6", Front Section Asm, Spindle Eterna Washer Handle, Kitchen 4-Arm Sleeve Index, Button, Blue/Cold O-Ring Screw, Handle Asm, Out 035A
6 B-0594 Pot Filler Faucet Assembly 1 Asm, Double Joint Nozzle O-Ring,.739 x Asm, Nozzle, 12", Back Section Spout Washer Body, Spout Sleeve Set Screw, Handle O-Ring Asm, Base Faucet B-0210-LN 6 Asm, Nozzle, 12", Front Section Asm, Spindle Eterna Washer Handle, Kitchen 4-Arm Sleeve Index, Button, Blue/Cold O-Ring Screw, Handle Asm, Out 035A
7 B-0597 Faucet Assembly with Spring Checks 1 Asm, Double Joint Nozzle Spout Asm, Nozzle, 12", Back Section Body, Spout Washer Set Screw, Handle Sleeve Asm, Base Faucet w/ Spring Checks O-Ring Screw, Handle Asm, Nozzle, 6", Front Section Index, Button - Blue/Cold Washer Index, Button - Red/Hot Sleeve Handle, Lever O-Ring Asm, Spindle, Eterna - Cold Asm, Out 035A Asm, Spindle, Eterna - Hot O-Ring,.739 x Asm, Coupling Flange
8 B-0598 Faucet Assembly with Spring Checks 1 Asm, Double Joint Nozzle Spout Asm, Nozzle, 12", Back Section Body, Spout Washer Set Screw, Handle Sleeve Asm, Base Faucet w/ Spring Checks O-Ring Screw, Handle Asm, Nozzle, 12", Front Section Index, Button - Blue/Cold Washer Index, Button - Red/Hot Sleeve Handle, Lever O-Ring Asm, Spindle, Eterna - Cold Asm, Out 035A Asm, Spindle, Eterna - Hot O-Ring,.739 x Asm, Coupling Flange
9 B-0605 Kettle and Pot Filler Assembly 1 Nozzle Screw, Handle Nut, Handle Handle, Squeeze Valve Body, Squeeze Valve Washer Asm, Bonnet Ring, Holddown Asm, Hose, Stainless Steel, 68" B-0068-H 10 Nipple, 3/8" x 2" Elbow, Cast Round Adapter, 3/8" Male X 3/4"-14 Male Washer Hook, Finger Nipple, 3/8" x 2" Asm, Base Faucet B-0310-LN
10 B-0610 Faucet Assembly with Hose 1 Asm, Base Faucet Asm, Vacuum Breaker B Hook, Finger Nipple Elbow, Cast Round Adapter Handle Nut, Handle Screw, Handle Asm, Bonnet Holddown Ring Washer Body, Squeeze Valve Nozzle Asm, Hose, Stainless Steel, 68"B-0068-H
11 B-0653 Mop Hook 1 Screw, Wall Mount
12 B-0660-POL, B-0660-RGH Model B-0660-POL has a polished chrome plated finish. Model B-0660-RGH has a rough chrome finish. Faucet Assembly 1 Screw, Handle Index, Button - Blue/Cold Index, Button - Red/Hot Handle, Lever Asm, Spindle, Eterna - Cold Asm, Spindle, Eterna - Hot Spout, Polished (B-0660-POL) Spout, Rough (B-0660-RGH) Nipple Rollpin, Clevis Clevis Asm, Coupling Flange Rod, Support Rollpin, Support Rod Flange, Support Rod Screw, Wall Mount
13 B-0665-RGH, B-0665-BSTR, B-0665-BSTP Faucet Assembly Models B-0665-RGH and B-0665-BSTR have a rough chrome finish. Model B-0665-BSTP has a polished chrome finish. Models B-0665-BSTR and B-0665-BSTP both include BST insert ( ). 1 Screw, Handle Index, Button - Blue/Cold Index, Button - Red/Hot Handle, Lever Asm, Spindle, Eterna - Cold Asm, Spindle, Eterna - Hot Rollpin, Clevis Spout, Polished (B-0665-BSTP) Spout, Rough (B-0665-RGH & B-0665-BSTR) Clevis Rod, Support Asm, Vacuum Breaker B Screw, Wall Mount Rollpin, Support Rod Flange, Support Rod Nipple Asm, Coupling 00AA 15 Asm, BST Spindle and Insert (B-0665-BSTR & B-0665-BST
14 B-0666-POL, B-0666-RGH Model B-0666-POL has a polished chrome plated finish. Model B-0660-RGH has a rough chrome finish. Faucet Assembly 1 Screw, Handle Index, Button - Blue/Cold Index, Button - Red/Hot Handle, Lever Asm, Spindle, Eterna - Cold Asm, Spindle, Eterna - Hot Rollpin, Clevis Spout, Polished (B-0666-POL) Spout, Rough (B-0666-RGH) Clevis Rod, Support Asm, Vacuum Breaker B T Handle, Supply Stop Screw, Wall Mount Rollpin, Support Rod Flange, Support Rod Nipple Cap, Key Stop
15 B-0673-RGH Model B-0673-RGH has a rough chrome plated finish Service Sink Faucet 1 Asm, Coupling Flange Spout Screw, Handle Index, Button - Blue/Cold Index, Button - Red/Hot Handle, Lever Asm, Spindle, Eterna - Cold Asm, Spindle, Eterna - Hot
16 B-0674-RGH, B-0674-BSTR, B-0674-BSTP Models B-0674-RGH and B-0674-BSTR have a rough chrome finish. Model B-0674-BSTP has a polished chrome finish. Models B-0674-BSTR and B-0674-BSTP both include BST insert ( ). Service Sink Faucet 1 Screw, Handle Index, Button - Blue/Cold Index, Button - Red/Hot Handle, Lever Asm, Spindle, Eterna - Cold Asm, Spindle, Eterna - Hot Asm, Vacuum Breaker B Nipple Asm, Coupling Flange 00AA 8 Spout Asm, BST Spindle and Insert (B-0674-BSTR & B-0674-BS
WILLIS WALL-MOUNT FAUCET INSTALLATION
SKU(s): 924620 BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures and plumbing. Signature Hardware accepts no liability for any damage to the
More informationWAL-RICH CORPORATION SINCE 1950 SINK SPECIALTIES FLEXIBLE BASIN SUPPLY TUBES
FLEXIBLE BASIN SUPPLY TUBES W-R# Size (OD) Finish Min Box 0209008 3/8" x 12" CP 1 100 0209012 3/8" x 20" CP 1 100 0209014 3/8" x 30" CP 1 50 0209016 3/8" x 36" CP 1 50 0209020 ½" x 20" CP 1 50 FLEXIBLE
More informationROTUNDA WALL-MOUNT FAUCET INSTALLATION
SKU(s): 919045 BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures and plumbing. Signature Hardware accepts no liability for any damage to the
More informationNew Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
More informationPLASTIC BALLCOCK Includes: Vinyl Refill Tube, Float Rod, Flange Nut, Washer, 5/8 or 1/2 Coupling Nut and Water Level Adjustable Screw.
Flush Valves PLASTIC BALLCOCK Includes: Vinyl Refill Tube, Float Rod, Flange Nut, Washer, 5/8 or 1/2 Coupling Nut and Water Level Adjustable Screw. Toilet Flappers 51005 10 Anti siphon 5 50 6.25 P51005
More informationInstallation Instructions
Contemporary Round Floor Mounted Tub Filler Thank you for selecting American-Standard... the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly-- please read
More informationModel No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
More informationPressure Balance Shower Only Dual Control (Volume & Temperature) Ceramic Disc Cartridge Platinum Shower Trim Kit
Shower Only PL8900-00 & TR-SH Pressure Balance Shower Only Dual Control (Volume & Temperature) Ceramic Disc Cartridge Platinum Shower Trim Kit - Installation Instructions Before Your Installation Read
More informationW1265V, W1265B, W1265CV PARTS DIAGRAM
Trail Warrior Quick Split -Ton Log Splitters Parts Breakdown W65V, W65B, W65CV PARTS DIAGRAM 37 3 30 37 5 5b 37 34 4 36 4 44 3 6 3 0 4 3 6 35 38 5 9 46 3 40 38 35 40 43 43 4 40 39 7 6 8 9 7 6 35 49 63
More informationVICTORIAN WIDESPREAD FAUCET
VICTORIAN WIDESPREAD FAUCET SKU(s): 900889, 900890, 900907, 903778, 918910, 918911 BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature
More informationMALEKO WALL-MOUNT FAUCET INSTALLATION
SKU(s): 934146 BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures and plumbing. Signature Hardware accepts no liability for any damage to the
More informationONASSIS SHOWER SET INSTALLATION
SKU(s): 925939 BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for any damage to the plumbing, floor,
More informationBALANTINE WALL-MOUNT FAUCET INSTALLATION
SKU(s): 911574, 911575 BALANTINE WALL-MOUNT FAUCET INSTALLATION BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures and plumbing. Signature Hardware
More informationInstallation Instructions
Contemporary Square Floor Mounted Tub Filler Thank you for selecting American-Standard... the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly-- please read
More informationUniversal Pipe Cutter (UPC) Replacement Parts Booklet
Universal Pipe Cutter Universal Pipe Cutter (UPC) Booklet Table of Contents Drawing Number U U U U U U U U8 U9 U0 U Description UPC Front View UPC Pneumatic Rear View UPC Hydraulic Rear View UPC Mainframe
More information8" PIVOT. Model 8000 Pivot - Prior to Feb 2002
" PIVOT Model 000 Pivot - Prior to Feb 00 " Pivot Table of Contents Description Rev. # Pg. # Overall Assembled View... 0-0... Legs & Braces... 0-0... Ladder... 0-0... Collector Ring "J" Tube... 0-0...
More informationWaynetown Water Systems Improvements. Division A -New Water Treatment Plant Town of Waynetown, IN. Submittal Review Sheet
Waynetown Water System Improvements Division A -New Water Treatment Plant Town of Waynetown, IN Submittal Review Sheet Attached is the submittal for the Lavatory for the Waynetown Water Systems Improvements
More informationBrake Gears Suspension Body - TCS
Brake Gears Suspension Body - TCS-980 Brake Gears Suspension Body - TCS-980 100 426230A00 CENTRE HOUSING 1 101 426230A50 LOAD SHEAVE 1 102 426230200 COUPLING 1 103 426230350 CHAIN GUIDE 1 104 426230360
More informationHD38, HD58, HD78 REV
HD38, HD58, HD78 REV. 07.29.2014 COVER for HD38, HD58, HD78 5 P004868 1/4-20x3/4 Button Head Cap Screw Stainless Steel 2 6 P001450 Lockwasher - Internal Tooth.250 6 8 P005200 Wave Disc Washer 4 10 P004869
More informationInstallation Instructions 3/4 Thermostatic Valve Rough-in & Trim (PL8950)
Tub & Shower PL950 Installation Instructions 3/ Thermostatic Valve Rough-in & Trim (PL950) CONTENT 0 - Valve & stop vlave specifications 03 - Face plate specifications 0 - Handle specifications 05 - Shower
More informationINSTALLATION GUIDELINES
RW ATLAS Wall Mounted Lavatory Faucet Metal Wheel Handles Style No. RWLS60 IMPORTANT: INSTALLATION GUIDELINES To ensure this product is installed properly, you must read and follow these guidelines. The
More information1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
More informationMODEL D DIESEL PILE HAMMER
AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710
More informationINSTALLATION INSTRUCTIONS FOR WALL TUB SETS, TWO HANDLE SHOWER SETS AND WALL LAVATORY SET VALVES NUMBERED: RC & RC
P 99061 INSTALLATION INSTRUCTIONS FOR WALL TUB SETS, TWO HANDLE SHOWER SETS AND WALL LAVATORY SET VALVES NUMBERED: 8090536RC & 9090536RC 2222 Camden Court, Oak Brook, IL 60523 Telephone: 800-PHYLRICH (749-5742)
More informationESCUTCHEONS & NIPPLES THREAD CODE CHART UNIVERSAL
ESCUTCHEONS & NIPPLES THREAD CODE CHART ID # SIZE MANUFACTURER 1 1/2" - 24 Thread Sayco 2 9/16" - 20 Thread American Standard, Central Brass 3 5/8" - 18 Thread Price Pfister, Repcal 4 5/8" - 24 Thread
More information3 POINT HITCH LOGSPLITTER
3 POINT HITCH LOGSPLITTER OPERATOR S MANUAL AND PARTS LIST TABLE OF CONTENTS SECTION PAGE 1. GENERAL INFORMATION 1 2. SAFETY GUIDELINES 2 2.1 DEFINITIONS 2 2.2 SAFE OPERATING PROCEDURE 3 3. LOG SPLITTER
More informationCopyright 2005 Valmont Industries, Inc.
Hose Drag TOPIVIEW OF CART Universal 1 Left Guidance Support (4" H.D.) 1732080... Left Guidance Sumort.. 16". H.D.)... 1732138 2 Right Guidance Support (4" H.D.)... 1732081 Right Guidance Support (6" H.D.)...
More informationOperating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016
More informationSubmittal Transmittal
Commonwealth Engineers, Inc. 7256 Company Drive Indianapolis IN 46237 United States Submittal Transmittal PROJECT: Waynetown - Water-Strmwtr Imprv-Div A J13046-A DATE SENT: 9/28/2016 SUBJECT: DS-22-15_Lavatory
More informationPARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V
PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V UPPER ASSEMBLY 101 6190481 THROTTLE CABLE FOR MODELS WITH ADDITIONAL CHOKE CABLE 1 101 6190751 THROTTLE CABLE FOR MODELS WITH OUT ADDITIONAL
More informationPARTS Stand Breakdown
PARTS Stand Breakdown 35-5 35-2 35-4 63 1 2 3 4 5 35-1 35-3 36 37 38 39 35 34 33 32 30 28 6 7 8 21 29 23 22 27 26 25 24 42 43 44 45 46 47 9 10 62 61 60 51 11 59 19 18 12 12 13 58 14 57 15 56 55 54 53 52
More informationPARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
More informationProject 8.1a Model A Button Maker
Page 1 of 16 Project 8.1a Model A Button Maker Introduction Interpreting dimensioned drawings is an important engineering skill. Using drawings to create a computer model of a part is also important. You
More informationInstallation instructions for FC9 & FC18 Forward Controls for Yamaha V-Max
Installation instructions for FC9 & FC18 Forward Controls for 1985-2007 Yamaha V-Max It is highly recommended that you use a thread lock compound such as Loctite brand on all threads to keep them from
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Square Free Standing Floor Mount Tub Filler Model D35900900 Thank you for selecting DXV. To ensure that your installation proceeds smoothly, please read these instructions carefully
More informationPower Train Lift Max. Capacity: 1,250 lbs.
655 EISENHOWER DRIVE OWATONNA, MN 55060 USA PHONE: (507) 455-7000 TECH. SERV.: (800) 533-6127 FAX: (800) 955-8329 ORDER ENTRY: (800) 533-6127 FAX: (800) 283-8665 INTERNATIONAL SALES: (507) 455-7223 FAX:
More informationParts Manual 2200 Bale Hiker
Parts Manual 2200 Bale Hiker Part Number K56202-02B IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however, the
More informationLATTIMORE SHOWER SET INSTALLATION
SKU(s): 931419 LATTIMORE SHOWER SET INSTALLATION BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability
More informationChisel TAPWARE SHOWERS ACCESSORIES
Chisel TAPWARE SHOWERS ACCESSORIES Class Leading Design The designers at Faucet Strommen used round, soft square & rectangle elements to form the beautiful Chisel tapware range. Perfect proportions and
More informationSection E SWEEP WAGON
Section E SWEEP WAGON 1E 2E Index No. Part No. Description 1. 47-042058-002 Sweep Wagon Frame with Leaf Springs N.A. Sweep Wagon Frame without Leaf Springs 2. 47-041769-003 Sweep Board Only (brown for
More informationGENERAL ASSEMBLY TCR 2000/2 1:4 DRG 1368D 10 25/01/ / 1. If In Doubt Ask REVISION HISTORY. Part Number. 7.5 kg D01-AH6 REV0 REV.
REVISION HISTORY REV. DATE APPROVED 0 Part Number DRG 1368D 10 Title of Part GENERAL ASSEMBLY 1:4 Scale Designed By Drawn By Checked By Approved By Surname Adam Migala E. Crichton B. Aitken Title of Project
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS LT1 DISHWASHER ML-104239 LT1 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 18581 Rev. D (June 2017) F-18581 Rev. D (June 2017) - 2 - HOBART 2017 Table
More informationA. This Section includes plumbing fixtures and related components.
SECTION 224200 PLUMBING FIXTURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationDiesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
More informationInstallation Instructions 8115F 8115SF
TM Installation Instructions 85F 85SF Single Control Centerset Lavatory Faucet with Speed Connect Drain Congratulations on purchasing your American Standard faucet with the Speed Connect Drain, a feature
More informationInstallation Instructions
MOUNT TUB SYSTEMS HAMPTON TRIM KIT T980.702 Installation Instructions T980.702 T980.712 T980.722 T980.732 Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To
More informationWall-Mounted Basin Set
P24702-LV 2014 1 of 6 KALLISTA THANK YOU FOR CHOOSING KALLISTA We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual before you install your KALLISTA product.
More informationAPPLICATION CHART. Tractor Model * Wood Splitter HOME TRACTORS ATTACHMENTS INDEX
R Ingersoll HOME WOOD SPLITTER J31, K31 AHSHD, HSHD, J32, K32, J32 J34, K34, L34 AHSWD, HSWD, K36 Parts Catalog 8-2052 NOTE: This Catalog replaces Catalog 8-2051 TRACTORS ATTACHMENTS INDEX PAINT GENERAL
More informationHow to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced)
How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) 1. Press and hold the set button (top left corner) until the display shows Fun
More informationBP Brine Pro Brine Maker. Parts List. This Parts List is for BP-2000 brine makers with serial numbers beginning with and higher.
November, 0 Lit. No., Rev. 0 BP-000 Brine Pro Brine Maker Parts List This Parts List is for BP-000 brine makers with serial numbers beginning with 00 and higher. A DIVISION OF DOUGLAS DYNAMICS, LLC FRAME
More informationParts Manual 881 Hay Hiker
Parts Manual 881 Hay Hiker Part Number K20393P-06 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however, the quantity
More informationWILLIS WIDESPREAD FAUCET
SKU(s): 924621 WILLIS WIDESPREAD FAUCET BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for any
More informationPARTS MANUAL. SERIAL NO: to BAND SAWING MACHINE
PARTS MANUAL MODEL: TF-2025NC SERIAL NO: 541-98101 to BAND SAWING MACHINE MACHINE SPECIFICATIONS MODEL VOLTAGE CYCLE PHASE SERIAL NO. For your information and future reference, insert pertinent data concerning
More informationParts Manual TF Band Sawing Machine
Parts Manual TF-2525 Serial No: 356-07283 to Band Sawing Machine MACHINE SPECIFICATIONS MODEL VOLTAGE CYCLE PHASE SERIAL NO. For your information and future reference, insert pertinent data concerning
More informationDIAMOND MODEL CC1900 EARLY ENTRY CONCRETE SAW PARTS LIST P R O D U C T S. (March 2012) Part #
DIAMOND P R O D U C T S EARLY ENTRY CONCRETE SAW PARTS LIST MODEL CC1900 (March 2012) Part #1801617 (Intentionally Blank) TABLE OF CONTENTS Description Page No. Frame Assembly....4-5 Engine Assembly......6
More informationSECTION 9: PARTS Headstock Case and Shift
SECTION 9: PARTS Headstock Case and Shift 3 1 2 10-1 10-2 8 9 10 6 7 19 10-3 15 11 12 25 16 17 18 14 13 12 32 26 29 20 21 33 34 27 35 37 28 43 22 38 39 40 31 45 28 43 23 41 5 28 43 44 30 36-80- Model G0709
More informationPARTS LIST SERIES 5200
File No. 6052.120 Date: January 6, 2003 Supersedes: 6052.120 Date: June 1, 1996 SUMP PUMP NEW DESIGN 5200 SUMP PUMP PARTS IDENTIFICATION ITEM DESCRIPTION PAGE ITEM DESCRIPTION PAGE ITEM DESCRIPTION PAGE
More informationCoolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head
Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise
More informationMain Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor
More informationParts Manual for: MODELS / I.D. : / ZTH5223A / ZTH5225A / ZTH6125A
Parts Manual for: MODELS / I.D. : 968999153 / ZTH5223A 968999154 / ZTH5225A 969999155 / ZTH6125A Husqvarna policy is to improve its products whenever it is possible and practical to do so. In an effort
More informationHeadstock and Bow Breakdown (G0613)
SECTION 8: PARTS Headstock and Bow Breakdown (G0613) -48- G0613/14 Swivel Mast Metal Cutting Bandsaw Parts List (G0613) 1 PSB64M CAP SCREW M10-1.5 X 25 43 P0613043 HANDLE 2 PW04M FLAT WASHER 10MM 44 P0613044
More informationEXPLODED VIEW. Dake Corporation 724 Robbins Road Grand Haven, MI
EXPLODED VIEW *Exploded view is only for 350CE Cold Saw with Frequency Drive Motor* 21 REV032019 350CE Frequency Drive Gearbox: Part Description Part Number Part Description Part Number Oil Seal 86000000
More informationEXIRA SHOWER SET INSTALLATION
SKU(s): 925470 EXIRA SHOWER SET INSTALLATION BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for
More informationHYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog INDEX HOME TRACTOR ATTACHMENTS APPLICATION CHART
R Ingersoll HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog 8-3091 HOME TRACTORS ATTACHMENTS PAINT GENERAL INFO INDEX Deck. Belt and Idler Pulley...5 Mounting Bracket...7 Rear Wheels...7 Hydraulic Drive...9-13
More informationHR24TS Rotary Rake. Serial Numbers less than Illustrated Parts Breakdown. Curtain & Guards, Front
HRTS Rotary Rake Serial Numbers less than 00 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page Page Page Tongue Front Frame Front Axle Curtain & Guards, Front Front Pivot Bridge
More informationHYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
More information2016 CDM Smith All Rights Reserved July 2016 SECTION PLUMBING - FIXTURES AND TRIM
PART 1 GENERAL 1.01 SCOPE OF WORK SECTION 22 40 00 PLUMBING - FIXTURES AND TRIM A. Furnish all labor and materials required and install the following Plumbing Fixtures and companion Fixture Trim complete
More informationPARTS LIST WRANGLER 2730 DB & 3330 DB
PARTS LIST WRANGLER 2730 DB & 3330 DB RECOVERY TANK ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 3392051 TOP PLATE 1 102 9120500 10-24 X 3/8 TRUSS HEAD PHILLIPS SCREW - PACK OF 10 8 103 3392061 GASKET, TOP
More information2705 03-09 99 98 97 82 88 89 83 84 85 86 87 101 103 100 106 81 71 105 104 73 74 75 76 77 78 80 79 57 62 58 56 63 65 66 67 68 64 69 70 59 60 61 31 30 29 32 34 35 41 40 42 36 37 38 39 43 4445 46 33 55 54
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationPARTS LIST WRANGLER 2730 DB & 3330 DB
PARTS LIST WRANGLER 2730 DB & 3330 DB RECOVERY TANK ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 3392051 TOP PLATE 1 102 9120500 10-24 X 3/8 TRUSS HEAD PHILLIPS SCREW - PACK OF 10 8 103 3392061 GASKET, TOP
More informationSinger From the library of: Superior Sewing Machine & Supply LLC
Singer 69-14 LST OF PARTS COMPLETE NO. 69=14 MACHNE The Singer Manufacturing Co. ) LST OF PARTS COMPLETE FOR No. 69=14 Machine Central Bobbin, makes 18 staying and three fastening or tying stitches in
More informationNo. 412, 414, 416 Operations Manual
No. 412, 414, 416 Operations Manual CARE: Occasional oiling of moving parts with machine oil will ease operation and extend the life of the brake. Occasionally check and tighten the lower beam bracket
More informationParts Manual for: MODELS / I.D. : / WH3614A / WH3615A / WH4817A
Parts Manual for: MODELS / I.D. : 968999105 / WH3614A 968999111 / WH3615A 968999106 / WH4817A Husqvarna policy is to improve its products whenever it is possible and practical to do so. In an effort to
More informationTable of Contents. Section C : Center Drive Assembly. Section C. Call or Northwest Tillers today
Table of Contents Section C Section C : Center Drive Assembly Heavy Duty Center Drive Assembly... C1-C2 Heavy Duty Drive Shaft Assembly... C3 D Dual Drive Shaft Assembly... C4 Standard Duty Drive Housing
More informationLockformer / 16 Gauge Speednotch
Lockformer / 16 Gauge Speednotch INSTALLATION PRELIMINARY: After uncrating, locate unit, with or without base skid, to area of operation. Unbind foot switch cord and cylinder hoses and remove gauge pin
More informationMUELLER. Improved, Centurion Series, Modern Improved, and 107. Fire Hydrants. Inserting Extention Sections. Reliable Connections
insertion Instructions manual MUELLER Improved, Centurion Series, Modern Improved, and 107 table of contents PAGE Centurion Series Fire Hydrant Adding an Extention 2-3 Improved Fire Hydrant Inserting Extention
More informationDIAMOND CONCRETE SAW PARTS LIST MODEL CC1113-XL P R O D U C T S. June Part #
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC1113-XL June 013 Part #10 TABLE OF CONTENTS Description Page No. Saw Assembly (Normal Cut).... - Saw Assembly (Up-Cut)...... - Gas Engine Assembly......
More informationParts Manual C-305A. Band Sawing Machine
Parts Manual C-305A Serial No: 607-13101 to Band Sawing Machine MACHINE SPECIFICATIONS MODEL VOLTAGE CYCLE PHASE SERIAL NO. For your information and future reference, insert pertinent data concerning your
More informationParts List for Type 1
1 422190430001 FENCE BODY 1 2 901010600677 CAP SCREW 2 3 904010331451 WASHER 3 4 901010600605 CAP SCREW 2 5 904010101604S STEEL WASHER 2 6 422040105002 REAR SLIDE BLOCK 1 7 905040714459 STEEL PIN 1 8 928010414118
More informationIF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0503 ***IMPORTANT UPDATE*** For Machines Mfd. Since 11/06 and Owner's Manual Revised 05/11 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
More informationSection D ACCELERATOR
Section D ACCELERATOR 1D Index No. Part No. Description 1. 47-021476-001 Ball Accelerator Box 2. 11-051019-001 Hex Hd. Cap Screw (10 mm x 25 mm) 3. 11-052018-001 Flat Washer (10.5 mm x 21 mm x 2 mm) 4.
More informationAcrylic Claw Foot Tub
Acrylic Claw Foot Tub Wrench or socket Drill & Bits Parts Recommended 2-2 x12 boards 4 Lag Bolts 4 Flat Washers Be sure to re-inforce the floor before securing tub. We recommend 2-2 x12 s securely fastened
More informationThuys Engineering Parts Lists
Parts Lists The list below was developed for AJS parts, but all nuts and bolts are Cycle Engineering Institute threads that are common on all British motorcycles built before 1970. Contact Details FRAME
More informationSPECIFICATION SHEETS. FRAMELESS GLASS pool fencing
SPECIFICATION SHEETS FRAMELESS GLASS pool fencing 8-10mm 12mm STANDARDS & NATA TESTING 1254mm 1200mm * GLASS POOL FENCING MAXIMUM SPAN 2000MM 12MM TOUGHENED SAFETY GLASS 1200MM HIGH FULLY AS/NZ-2208 CERTIFIED
More informationPARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE DRILLS
NON-REVERSING HANDLE ASSEMBLY (SERIAL NO S. STARTING WITH B & D ) PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE DRILLS Form A277D Date 2008July11/C Page 1 of 8 4. 14309 Ring O 5. 14312 Ring O 12. 54156
More information488 PARTS LIST 1 3 SCREWS FOR NO. 2 2 FLYWHEEL CAP 3 FLYWHEEL 4 END NUT FOR NO. 10 5 BALL BEARING FOR NO. 3 (1 st ) 6 BALLBEARING FOR NO. 3 (2nd) 7A CLUTCH RACE KEY 7B CLUTCH RACE 7C CLUTCH SPRING 7D 7
More informationMUELLER. Improved, Centurion Series, Modern Improved, and 107. Fire Hydrants. Inserting Extension Sections. Reliable Connections
insertion Instructions manual MUELLER Improved, Centurion Series, Modern Improved, and 107 table of contents PAGE Centurion Series Fire Hydrant Adding an Extension 2-3 Improved Fire Hydrant Inserting Extension
More informationDiesel Hammer Model D19-42 Part #
Diesel Hammer Model D19-42 Part # 120491 2 Diesel Pile Hammer Part # 120941 Pos Order No. Pg Description Qty 120941 Diesel Pile Hammer D19-42 (Bauer MNR:426514) 1 160198 4 Cylinder Lower Part cmpl 1 2
More informationOperating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040
Operating Instructions and Parts Manual 10 x 16 Horizontal Band Saw Models J-7020, J-7040 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414472 Ph.: 800-274-6848 Revision C2 03/2014 www.jettools.com
More informationTRM Water Dance Two Wall Shower Trim Operation & Maintenance Manual
-780- Water ance wo Wall hower rim peration & aintenance anual odel umbers pecifications -780- wo Wall hower rim wo wall shower trim with lever handle includes 0" slide bar with cradle for hand shower,
More informationCAPX Installation Print 4/10/ CAB ASSEMBLY Part Pos Description Quantity Foot Notes CAB SECTION PLATE, MO
CAPX Installation Print 4/10/2019 6245100014 CAB ASSEMBLY Part Pos Description Quantity Foot Notes 6245100008 1 CAB SECTION 1 + 6705100023 2 PLATE, MOUNTING 1 6705012439 3 PLATE, MOUNTING 1 6326100000
More informationCOMMERCIAL MOWERS PARTS MANUAL FOR: MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251
PARTS MANUAL FOR: COMMERCIAL MOWERS MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251 FD KEES POWER EQUIPMENT, L.L.C. 700-800 PARK AVENUE BEATRICE, NEBRASKA, U.S.A. 68310 PRINTED IN USA MANUAL NO.-102935 REV.
More information/ WH4817ETS MANUAL NO REV. 02 (02/17/06)
Parts Manual Models: 968999123 / WH4817ETS MANUAL NO. 539106509 REV. 02 (02/17/06) Model Number: Serial Number: Date of Purchase: Dealer Information: Notes: 2 Table of Contents POWER UNIT ASSEMBLY... 4
More informationINSTALLATION GUIDELINES
STYLE No. DSXS20 with 8 Shower Head and Metal Cross Handles STYLE No. DSXS2C System with Metal Cross Handles STYLE No. DSXS30 with 8 Shower Head, Metal Lever and Cross Handle STYLE No. DSXS3C System with
More informationCONTROLS KIT FOR ALL # & # HARLEY DAVIDSON SPORTSTER MODELS
INSTALLATION INSTRUCTIONS TC BROS. CHOPPERS PART #0-0075 & #0-0076 (No Pegs) FORWARD CONTROLS KIT FOR ALL 00-0 HARLEY DAVIDSON SPORTSTER MODELS If downloading & printing these instructions online, be sure
More informationMain Components. Pipe and Bolt Threading Machine 300/300A. Early Style. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine 00/00A Main Components Early Style 0 0 * 0 0 0 For Information on Cutters, Die Heads and Reamers SEE INDEX Ref. 0 0 Catalog 0 00 00 0 0 0 00 0 0 0 0 0 0 0 00 0 00 00 00
More informationSC Spare parts list. Hydraulic steel cutter. SC 3600 s/n DEQ Construction Tools GmbH No
SC 3600 Spare parts list Hydraulic steel cutter SC 3600 s/n DEQ169166-2018 Construction Tools GmbH No. 3390788601 2018-05-09 General information This spare parts list applies to the following: Part number
More information15T Hoist and Trolley TMH15000/5 AT15S DRG /02/ ,50 1 / 1. If In Doubt Ask REVISION HISTORY. Part Number D01-AHT28 REV0.
REVISION HISTORY REV. DATE APPROVED D-AHT REV Part Number DRG Title of Part Title of Project Scale not to scale Designed By Drawn By Checked By Approved By Surname T. Mikolajewski T. Mikolajewski B. Aitken
More information