Submittal Transmittal

Transcription

1 Commonwealth Engineers, Inc Company Drive Indianapolis IN United States Submittal Transmittal PROJECT: Waynetown - Water-Strmwtr Imprv-Div A J13046-A DATE SENT: 9/28/2016 SUBJECT: DS-22-15_Lavatory SUBMITTAL ID: 50 TYPE: Submittal TRANSMITTAL ID: PURPOSE: Exceptions noted, Furnish as corrected VIA: Info Exchange SPEC SECTION: FROM NAME COMPANY PHONE Jennifer Harshbarger Commonwealth Engineers, Inc. jharshbarger@contactce i.com (317) TO NAME COMPANY PHONE Lynette McNees Thieneman Construction lynette.mcnees@thiene manconstruction.com REMARKS: Response (Exceptions Noted, Furnish as Corrected) from: Sherri Bell (Commonwealth Engineers, Inc.) Remarks: No AIS or De Minimus List required per IFA See notes in submittal CONTENTS QUANTITY: 1 DATED: 9/19/2016 NUMBER: DESCRIPTION: DS-22-15_Lavatory.pdf ACTION: REMARKS: Page 1 of 2

2 Submittal Transmittal DATE: 9/28/2016 ID: COPIES: Rachel Katchmar Robert Bellucci Sherri Bell Paul Rusk (Commonwealth Engineers, Inc.) (Commonwealth Engineers, Inc.) (Commonwealth Engineers, Inc.) (Town of Waynetown) Page 2 of 2

3 Waynetown Water System Improvements Division A -New Water Treatment Plant Town of Waynetown, IN Submittal Review Sheet Attached is the submittal for the Lavatory for the Waynetown Water Systems Improvements project for your review and approval. Thieneman Construction has reviewed the submittal information and added the following notes for your review, approval, and consideration: Items for Commonwealth Engineering: Items for Supplier : 1. Supply materials as requested by TCI. If you have any questions on this submittal information, please call Lewis (317) Thieneman Construction requests your review, approval, and return of one (1) copy of the approved submittals. Project Name: Contractor: Subcontractor / Supplier: Submittal Number: Submittal Specification Section: Item Description: Quantity of Submittals: Comments: Quantity of Approved Submittals to be Returned: Signature: Waynetown Water Systems Improvements Thieneman Construction, Inc. Eagle Mechanical DS DS-22 Lavatory 1 Electronic See Above 1 Electronic Lewis Starr CONTRACTOR S CERTIFICATION Submittal material has been reviewed for compliance with specifications and drawings. Required field measurements have been verified. The work shown on this submittal has been coordinated with other submittals affected by this work. All data has been checked by the Contractor and any variations from the specifications or drawings have been noted. The work described on the submittal material is recommended by the Contractor, and the guarantee in the specifications will apply: Contractor: Thieneman Construction Approved: Lewis Starr Date: 9/15/16 No AIS or De Minimus List required per IFA See notes in submittal

4 LAV-1 LAV-1 LAVATORY A AMERICAN 21 X 18 4 VITREOUS CHINA LAVATORY WHITE LUCERN WHITE STANDARD A H002 AMERICAN STANDARD CCY LEAD LAW COMPLIANT 2 HANDLE CENTER SET LAVATORY FAUCET LESS DRAIN 1.5 DEA7601 DEARBORN 1 1/4" X 6" 17 GA TAILPIECE PO PLUG CAST GRI DEA5051 DEARBORN SEMI CAST ECON P TRAP MLF2167 MCGUIRE LF 1/2" IPS X 1/2" OD, WHEEL HANDLE Page: 13 / 56

5 LAV-1 LAVATORY BARRIER FREE LUCERNE WALL-HUNG LAVATORY back and side splash shields Faucet holes on 203mm (8") centers (Illus.): For exposed bracket support Faucet holes on 102mm (4") centers: For exposed bracket support Single center faucet hole (Illus.): For exposed bracket support (not included) Nominal Dimensions: Bowl sizes: Compliance Certiications - Meets or Exceeds the Following Speciications: LUCERNE WALL-HUNG LAVATORY VITREOUS CHINA To Be Speciied: Color: White Bone Silver Black Linen Faucet*: Faucet Finish: Supplies: 1-1/4" Trap: Nipple: Bracket Support (by others): Concealed Arms Support (by others): * See faucet section for additional models available MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE- LINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES. Top of front rim mounted 864mm (34") from finished floor. M AS America Inc. Revised 8/12 Page: 14 / 56

6 LAV-1 LAVATORY BARRIER FREE LUCERNE WALL-HUNG LAVATORY VITREOUS CHINA FINISHED WALL 102mm (4") 152mm (6") 54mm (2-1/8") 86mm (3-3/8") 203mm (8") 102mm FINISHED (4") WALL 152mm (6") 86mm (3-3/8") 203mm (8") FINISHED WALL 152mm (6") 184mm (7-1/4") 203mm (8") 464mm (18-1/4") 152mm (6") 102mm (4") 464mm (18-1/4") (6) 25mm (1") DIA. ACCESS HOLES FOR CONC. ARMS 102mm (4") 79mm (3-1/8") 44mm (1-3/4") 25mm (1") 38mm 10mm (3/8) (1-1/2") DIA. ANCHOR SCREW HOLES S-9 HANGER 27mm X 14mm (1-1/16" x 5/16") SLOTS SUPPLIES AS REQUIRED 1-1/4" O.D. WASTE OUTLET FOR DRAIN PLUG 521mm (20-1/2") 267mm (10-1/2") 203mm (8") 425mm (16-3/4") 13mm (1/2") 114mm (4-1/2") 1-1/4 O.D. WASTE OUTLET FOR POP-UP DRAIN 206mm (8-1/8") 8mm (5/16") 54mm (2-1/8) DIA. HOLES FOR CONCEALED ARMS * 286mm (11-1/4") 298mm * (11-3/8") FINISHED FLOOR 352mm * (13-7/8") 787mm (31") 864mm (34") (6) 25mm (1") DIA. ACCESS HOLES FOR CONC. ARMS 44mm 102mm (1-3/4") (4") 25mm (1") 79mm (3-1/8") 38mm (1-1/2") 10mm (3/8") DIA. ANCHOR SCREW HOLES S-9 HANGER 27mm x 14mm (1-1/16 x 5/16") SLOTS SUPPLIES AS REQUIRED 1-1/4" O.D. WASTE OUTLET FOR DRAIN PLUG 521mm (20-1/2") 267mm (10-1/2") 203mm (8") 425mm (16-3/4") 114mm (4-1/2") 13mm (1/2") 1-1/4" O.D. WASTE OUTLET FOR POP-UP DRAIN 206mm (8-1/8") 8mm (5/16") 54mm (2-1/8") DIA. HOLES FOR CONCEALED ARMS * 260mm (10-1/4") 298mm * (11-3/8") 352mm * (13-7/8") FINISHED FLOOR 787mm (31) 864mm (34) 18-1/4" (464mm) FINISHED WALL 18-1/4" (464mm) FINISHED WALL 34" (864mm) 27" MIN. (686mm) 8" MIN. (203mm) BARRIER FREE CLEARANCE 6-3/4" MAX. (171mm) 9" MIN. (229mm) 34" (864mm) 27" MIN. (686mm) 8" MIN. (203mm) 6-3/4" MAX. (171mm) 11" (279mm) BARRIER FREE CLEARANCE 9" MIN. (229mm) 11" (279mm) NOTES: * IMPORTANT LAVATORY DESIGNED TO MEET ADA HANDICAPPED GUIDELINES WITH MOUNTING HEIGHT SET AT 864MM (34") ABOVE FINISHED FLOOR. M AS America Inc. Revised 8/12 Page: 15 / 56

7 LAV-1 LAVATORY HERITAGE TWO-HANDLE CENTERSET LAVATORY FAUCET WITH GOOSENECK SPOUT & FACTORY INSTALLED HANDLES MODEL NUMBER: H Centerset Lavatory Faucet Rigid gooseneck spout. 1.5 gpm pressure compensating aerator. Brass wrist blade handles. Less drain V Centerset Lavatory Faucet Rigid gooseneck spout. 1.5 gpm pressure compensating aerator. Vandal-resistant brass wrist blade handles. Vandal-resistant aerator. Less drain..172 Handle Faucet comes complete with factory installed handles. V=Vandal-Resistant, H=Standard 127mm (5") 135mm (5-5/16") 235mm (9-1/4") 140mm (5-1/2") 51mm (2") 22mm 35mm (7/8") DIA. (1-3/8") MAX. 32mm (1-1/4")DIA. MOUNTING HOLES 51mm (2") 102mm (4") FOR GROUND JOINT OR 1/2" O.D. SLIP CONNECTION GENERAL DESCRIPTION: Durable cast brass construction. Amarilis 1/4 turn washerless ceramic disc valve cartridges. One-half inch male inlet shanks with brass coupling nuts and shank nuts. Vandal-resistant faucets feature vandal-resistant aerators and index buttons on factory-installed handles. 1.5 gpm/5.7l/min. maximum flow rate. NOT RECOMMENDED FOR USE ON 2-HOLE KITCHEN OR BAR SINKS. PRODUCT FEATURES: Pressure Compensating Aerator: Provides a constant water flow of 1.5 gpm throughout the pressure range. Solid Brass Construction: Durable - Excellent in high use applications. Ideal for prolonged contact with water. Ceramic Disc Valve Cartridges: Assures a lifetime of drip-free performance. Lead Free: Faucet contains 0.25% total lead content by weighted average. Factory Installed Handles: Simplifies installation. SUGGESTED SPECIFICATION: 4" centerset lavatory faucet shall be cast brass construction with all brass shank nuts and coupling nuts. Shall feature water-conserving 1.5 gpm/5.7l/min. pressure compensating aerator. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Fitting shall be American Standard Model # AS America Inc. L73 Revised 3/14 Page: 16 / 56

8 LAV-1 LAVATORY HERITAGE TWO-HANDLE CENTERSET LAVATORY FAUCET WITH GOOSENECK SPOUT & FACTORY INSTALLED HANDLES CODES AND STANDARDS FLOW RATE* These products meet or exceed the following codes and standards: ASME A CSA B 125 NSF 61/Section 9 NSF 372 GALLONS PER MINUTE INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. Product Number H V Description Centerset lavatory faucet. 1.5 gpm/5.7l/min pressure compensating aerator. Brass Wrist Blade Handles. Less drain. Centerset lavatory faucet. Vandal-resistant 1.5 gpm/5.7l/min pressure compensating aerator. Vandal-resistant Brass Wrist Blade Handles. Less drain. Finish Polished Chrome 002 MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES Other Aerators Available: Part Suffix LV22 V22 A15LV LV15 V15 LV10 V10 V05 V035** *PCA - Pressure Compensating **Meets Cal Green Code Description 2.2 gpm (8.3 Lpm) Vandal-Resistant Non-Aerated Laminar Flow Outlet 2.2 gpm (8.3 Lpm) Vandal-Resistant Aerator Anti-Microbial 1.5 gpm (5.7 Lpm) Vandal-Resistant Non-Aerated Laminar Flow Outlet 1.5 gpm (5.7 Lpm) PCA Vandal-Resistant Non-Aerated Laminar Flow Outlet.5 gpm (5.7 Lpm) PCA Vandal-Resistant Aerator 1.0 gpm (3.8 Lpm) PCA Vandal-Resistant Non-Aerated Laminar Flow Outlet 1.0 gpm (3.8 Lpm) PCA Vandal-Resistant Aerator 0.5 gpm (1.9 Lpm) PCA Vandal-Resistant Non-Aerated Spray 0.35 gpm (1.3 Lpm) PCA Vandal-Resistant Non-Aerated Spray 2013 AS America Inc. L74 Revised 3/14 Page: 17 / 56

9 LAV-1 LAVATORY CAST GRID PATENT OUTLET PLUG Engineering Specification: Dearborn Brass Semi-Cast Grid Patent Overflow Plug with 1-¼ x 6 17 gauge tailpiece. Job Reference DESCRIPTION Chrome Finished Includes: Cast Grid, P.O. Plug with nuts and washers and 17 gauge tailpiece Designed for installation in most commercial applications Product Description No Semi-Cast Grid Patent Overflow Plug with 1-¼ x 6 17 gauge Tailpiece Carton Carton Weight (lbs) Quantity Data is subject to manufacturing tolerances. Visit for updates 03/2009 Page: 18 / 56

10 LAV-1 LAVATORY o o o o o o brass nuts specified o o o Page: 19 / 56

11 LAV-1 LAVATORY no plastic supply lines Page: 20 / 56

12 Page: 56 / 56