Effective Date: December 2018 Void After: December Product: Plumbing Fixture Fittings File No. 3730

Transcription

1 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective Date: December 2018 Void After: December East Mission Blvd. Ontario, CA Identification: Plumbing supply fittings complying with this Standard shall be marked with the manufacturer's recognized name, trademark, or other mark or, in the case of private labeling, the name, trademark or other mark of the customer for whom the fitting was manufactured. The marking shall be accomplished by use of a permanent mark or by placing a permanent label on the product. Markings on plumbing supply fittings shall be visible after installation. Single-handle, single-control, and automatic compensating mixing bath and shower valves shall have identifiable temperature control settings in which the settings are indicated by words ("cold", "warm", "hot", etc.), by numbers, or graphically. Packages shall be marked with the manufacturer's name, trademark, or other mark as well as the model number or, in the case of private labeling, the name, trademark, or mark of the customer for whom the fitting was manufactured as well as the model number. This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.

2 Automatic compensating valves shall be accompanied by instructions for their installation, adjustment, and servicing, which shall specify how the handle position or limit setting is to be adjusted. Listed products shall bear the cupc certification mark. Characteristics: Fittings may include lavatory, sink, bath & shower, lawn and sediment faucets. To be installed in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC Products are in compliance with the following code(s): Uniform Plumbing Code (UPC ) National Plumbing Code of Canada International Plumbing Code (IPC ) Products are in compliance with the following standard(s): ASME A /CSA B

3 MODELS: ANGLE STOP VALVES EZ-FLO Part No. Description /8" IPS x 3/8" IPS /8" IPS x 3/8" OD /2" IPS x 1/4" OD /2" IPS x 3/8" OD /2" IPS x 1/2" OD /2" IPS x 1/2" or 7/16" S/J /2" OD 7/16" OD /8" OD x 1/4" OD /8" OD x 3/8" OD /8" OD x 1/2" OD /8" OD 1/2" or 7/16" S/J /2' Sweat x 3/8" OD 3-WAY ANGLE STOPS EZ-FLO Part No. Description /2" IPS x 3/8" OD x 1/4" OD /2" IPS x 7/16" SJ OD x 1/2" OD /2" IPS x 3/8" OD x 3/8" OD /2" IPS x 1/2" OD x 3/8" OD /2" IPS x 1/2" - 7/16" S/J x 1/4" OD /2" IPS x 1/2" - 7/16" S/J x 3/8" OD /2" OD x 1/2" OD x 3/8" OD /8" OD x 3/8" OD x 1/4" OD /8" OD x 3/8" OD x 3/8" OD /8" OD x 1/2" OD x 3/8" OD STRAIGHT STOP VALVE EZ-FLO Part No. Description /2" Celcon x 1/2" IPS /2" Celcon x 1/2" IPS /8" IPS x 3/8" OD /2" IPS x 3/8" OD /2" IPS x 1/2" or 7/16" S/J /8" OD x 3/8" OD /2" Sweat x 3/8" OD SUPPLY STOP VALVE Page 3 of 10

4 Part No. Description /8" IP x 3/8" OD /2" IP x 1/4" OD /2" IP x 3/8" OD /2" IP x 1/2" OD /2" IP x 1/2" or 7/16" S/J /2" IP x 3/8" FLARE /2" IP x 1/2" FLARE /8" OD x 1/4" OD /8" OD x 3/8" OD /8" OD x 1/2" OD /8" IP x 3/8" OD /2" IP x 3/8" OD /8" OD x 3/8" OD WALL MOUNTED KITCHEN FAUCETS EZ-FLO Part No. Description " Spout " Spout " Spouts QUARTER TURN 10731: (IPS) 3/8" OD x 3/8" FIP 10732: (IPS) 1/4" OD x 1/2" FIP 10733: (IPS) 3/8" OD x 1/2" FIP 10734: (IPS) 1/2" OD x 1/2" FIP 10735: (IPS) 1/2" or 7/16 SJ x 1/2" FIP 10754: (IPS) 3/8" OD x 3/8" FIP 10755: (IPS) 3/8" OD x 1/2" FIP 10737: 1/4" OD x 5/8" OD 10738: 3/8" OD x 5/8" OD 10739: 1/2" OD x 5/8" OD 10740: 1/2" or 7/16 SJ x 5/8" OD 10756: 3/8" OD x 5/8 OD 10736: 3/8" OD x 1/2" Sweat 10757: 3/8" OD x 1/2" Sweat 48650: 3/8" OD x 3/8" OD x 3/8" FIP 48651: 3/8" OD x 3/8" OD x 1/2" FIP 48655: 3/8" OD x 1/4" OD x 1/2" FIP 48656: 1/2" or 7/16" SJ x 3/8" OD x 1/2" FIP 48658: 1/2" or 7/16" SJ x 1/2" or 7/16" SJ x 1/2" FIP 48652: 3/8" OD x 3/8" OD x 5/8" OD 48654: 3/8" OD x 1/4" OD x 5/8" OD 48657: 1/2" or 7/16" SJ x 1/2" or 7/16" SJ x 5/8" 48653: 3/8" OD x 3/8" OD x 5/8" OD Page 4 of 10

5 SPEEDFLEX CLOSET SUPPLIES M612-4AS 612C-4AS M812-4AS 812C-4AS M615-4AS 615C-4AS M815-4AS 815C-4AS M620-4AS 620C-4AS M820-4AS 820C-4AS M612-3AS 612C-3AS M812-3AS 812C-3AS M615-3AS 615C-3AS M815-3AS 815C-3AS M620-3AS 620C-3AS M820-3AS 820C-3AS M612-4SS 612C-4SS M812-4SS 812C-4SS M615-4SS 615C-4SS M815-4SS 815C-4SS M620-4SS 620C-4SS M820-4SS 820C-4SS M612-3SS 612C-3SS M812-3SS 812C-3SS M615-3SS 615C-3SS M815-3SS 815C-3SS M620-3SS 620C-3SS M820-3SS 820C-3SS SM612-4AS S612C-4AS SM812-4AS S812C-4AS SM615-4AS S615C-4AS SM815-4AS S815C-4AS SM620-4AS S620C-4AS SM820-4AS S820C-4AS SM612-4SS S612C-4SS SM812-4SS S812C-4SS SM615-4SS S615C-4SS SM815-4SS S815C-4SS SM620-4SS S620C-4SS SM820-4SS S820C-4SS CM612-4AS C612C-4AS CM812-4AS C812C-4AS CM615-4AS C615C-4AS CM815-4AS C815C-4AS CM620-4AS C620C-4AS CM820-4AS C820C-4AS CM612-4SS C612C-4SS CM812-4SS C812C-4SS CM615-4SS C615C-4SS CM815-4SS C815C-4SS CM620-4SS C620C-4SS CM820-4SS C820C-4SS 621-3SS C5RC12S XM-612-4AS S612-4AS C5RD15S XM-812-4AS S617-4AS SM12S C5RC20S XM-612-4A S621-4AS SM15S C5RC30S XM-812-4A C612-4AS SM20S C5RC36S XM-612-4SS C617-4AS SM30S 512 XM-812-4SS C621-4AS SM36S 515 3ZC AS C5M ZC AS C5M ZC AS C5M ZC AS C5M12S 620 3ZC AS C5M15S 512S 3ZC AS C5M20S 515S 4ZC SS C5M30S 520S 4ZC SS C5M36S 530S 4ZC SS 5RC12 536S 4ZC SS 5RC15 612S 4ZC SS 5RC20 615S 4ZC SS 6RC12 620S 4ZC8-15 S812-4AS 6RC15 630S Page 5 of 10

6 CZC6-9 S817-4AS 6RC20 636S CZC6-12 S820-4AS 5RC12S S512 CZC6-15 C812-4AS 5RC15S S515 CZC8-9 C817-4AS 5RC20S S520 CZC8-12 C820-4AS 5RC30S S512S CZC8-15 X-612-4AS 5RC36S S515S SZC6-9 X-812-4AS 6RC12S S520S SZC6-12 6RC15S S530S SZC6-15 6RC20S C536S SZC8-9 6RC30S C512 SZC8-12 5M12 6RC36S C515 SZC8-15 5M15 S5RC12 C AS 5M20 S5RC15 C512S 617-4AS 6M12 S5RC20 C515S 621-4AS 6M15 S5RC12S C520S 612-3AS 6M20 S5RC15S C530S 617-3AS 5M12S S5RC20S C536S 621-3AS 5M15S S5RC30S 512RC 612-4SS 5M20S S5RC36S 515RC 617-4SS 5M30S C5RC12 520RC 621-4SS 5M36S C5RC15 612RC 612-3SS S5M12 C5RC20 615RC 617-3SS 620RC 512RCS S5US12 4ZC6-9 4ZC RCS S5US15 4ZC6-12 CZC RCS S5US20 4ZC6-15 CZC RCS C5US12 CZC6-9 CZC RCS C5US15 04ZC6-9 SZC RCS C5US20 04ZC6-12 SZC RCS 5CC12 04ZC6-15 SZC RCS 5CC15 04ZC6-20 5R12 630RCS 5CC20 04ZC8-9 5R17 636RCS 6CC12 04ZC8-12 5R21 S512RC 6CC15 04ZC8-15 6R12 S515RC 6CC20 04ZC8-20 6R17 S520RC S5CC12 04ZL6-9 6R21 S512RCS S5CC15 04ZL6-12 5R12S S515RCS S5CC20 04ZL6-15 5R15S S520RCS C5CC12 04ZL6-20 5R21S S530RCS C5CC15 04ZL8-9 5R29S S536RCS C5CC20 04ZL8-12 5R35S C512RC 3ZL ZL8-15 6R12S C515RC 3ZL ZL8-20 6R17S C520RC 3ZL6-20 0CZC6-9 6R21S C512RCS 4ZL6-12 OCZC6-12 6R29S C515RCS 4ZL6-15 OCZC6-15 6R35S C520RCS 4ZL6-20 OCZC6-20 S5R12 C530RCS 3ZL8-12 OCZC8-12 S5R17 C536RCS 3ZL8-15 OCZC8-15 S5R21 Page 6 of 10

7 CZC6-20 3ZL8-20 OCZC8-20 C5R12 CZL6-12 4ZL8-12 OCZL6-9 C5R17 CZL6-15 4ZL8-15 OCZL6-12 C5R21 CZL6-20 4ZL8-20 OCZL R X-5M12 CZL8-12 OCZL R X-512 CZL8-15 OCZL R X-2M12 CZL8-20 OCZL R X-212 SZL6-12 OCZL R X-5M12S SZL6-15 SZC R X-512S SZL6-20 SZC RS 5US12 SZL8-12 SZC RS 5US15 SZL8-15 3ZC RS 5US20 SZL8-20 3ZC RS 6US12 3ZC6-9 3ZC RS 6US15 3ZC6-12 4ZC RS 6US20 3ZC6-15 4ZC8-12 S512R S517R F6-21 P CQ S521R F8-12 P CQ C512R F8-17 P CQ C517R F8-20 P CQ C521R P CQ X-5R12 P CS X512R P CS ZRL6-12 P CS ZRL6-15 P CS ZRL6-20 P8-30 SWC-60 ZRW6-9 ZRL7-12 P8-36 SWC-68 ZRW6-12 ZRL7-15 P8-72 SWC-70 ZRW6-15 ZRL7-20 P10-72 SWC-80 ZRW6-20 ZRL8-12 SW-12 SWC-88 ZRW7-9 ZRL8-15 SW-15 SWC-60S ZRW7-12 ZRL8-20 SW-20 SWC-68S ZRW7-15 L6-12 SW-30 SWC-80S ZRW7-20 L6-15 SW-36 C60Q ZRW8-9 L6-20 FR6-12 C70Q ZRW8-12 L6-30 FR6-17 C80Q ZRW8-15 L6-36 FR ZRW8-20 L8-12 FR6-29 C66S N6-12 L8-15 FR6-35 C80S N6-15 L8-20 FR N6-20 L8-30 FR N8-12 L8-36 FR XC N8-15 R6-12 FR RQ N8-20 R6-15 FR RQ RW6-12 R R RW6-15 R RS RW6-20 R RS RW8-12 R8-12 K RS RW8-15 R8-15 K6-15 C74RQ RW8-20 R8-20 K6-20 C74RS Page 7 of 10

8 J6-12 R8-30 K6-30 S74R J6-15 R8-36 K J6-20 US12 K8-12 C70 J8-12 US15 K8-15 C80 J8-15 US20 K J8-20 CC12 K8-30 C74R F6-12 CC15 K R F6-17 CC20 74C VALVES & STOPS THREE WAY C-LR 084C 684C-R S74RS 34-A SS C-R C-LR C-R SS80 864C-R FMP-4SD 884C-LR SMP-40SD C660-LR CF60 C760-R CF80 C770-LR 63F C780-R C860-R 83F C880-LR 84F 664F VALVES & STOPS 63FS 64FS 83FS 84FS SWF-60 SWF-80 60XF 80XF THREE WAY 864F 884F SF660 QEST MANIFOLD SYSTEM QK2 QK3 3/4" MPT Inlet x 3/4" FPT Swivel Outlet, Double Outlet Vertical Feed Tube 3/4" MPT Inlet x 3/4" FPT Swivel Outlet, Triple Outlet Vertical Feed Tube Page 8 of 10

9 QK4BSC QK5 QK5IPS QKSW33S 3/4" FPT x 3/4" FPT Swivel Coupling 3/4" MPT Inlet x 1/2" MPT Outlet, Five Port Manifold with Valves 3/4" MPT Inlet x 1/2" MPT Outlet, Five Port Manifold 1/2" FPT Swivel Inlet x 1/2" MPT Outlet, Straight Fixture Control Valve Self-Piercing Saddle Valves (kits) *Models shall bear the UPC certification mark only Self-piercing Saddle Valve, Brass Self-piercing Saddle Valve, Brass Self-piercing Saddle Valve, Brass ft Copper Tube Icemaker Kit ft Copper Tube Icemaker Kit ft Copper Tube Icemaker Kit ft Poly Tube Icemaker Kit ft Poly Tube Icemaker Kit ft Poly Tube Icemaker Kit The following options are available for stops: SUFFIX HB HC HR SBT LK LK-SBT D D-PN D-SBT DESCRIPTION Brass Hexagon Handle Cross Handle Round Handle Stuffing Box Top Loose Key Stem W/ Lock Shield Loose Key Stem W/Stuffing Box Screwdriver Stem W/Lock Shield Screwdriver Stem W/Pack Nut Screwdriver Stem W/Stuffing Box Top NOTE: Handles are made of chrome plated zinc or chrome plated ABS. DISHWASHER ELBOWS: Page 9 of 10

10 ADDITIONAL COMPANY INFO: Plumbwell Tradestar R2S-PC33 R2A-PC33 R1-PCC432 R2S-PC43 R2A-PC43 R2A-PF43 R1-CCC433 R2S-PJ447 R2A-PJ447 R2A-PF44 R2A-XC43 R2S-XC43 R2A-VC43 R2S-CC53 R2A-CC53 R1-CCC532 R1-CCC533 R2S-CJ547 R2A-CJ547 R2S-CC54 R2A-CC54 R2A-SP43 R2S-SC43 R2A-CC53Q R2S-CC53Q R2A-PC43Q R2S-PC43Q R2S-SC43Q Page 10 of 10