LUCERNE WALL-HUNG LAVATORY

Transcription

1 -HUNG LAVATORY LUCERNE -HUNG LAVATORY Wall-hung sink Vitreous china Front overflow D-shaped bowl Self-draining deck area with contoured back and side splash shields Faucet ledge Faucet holes on centers (Illus.): For exposed bracket support Shown with Amarilis Heritage faucet with Triune Cross handles (not included) For wall hanger (included) or For wall hanger (included) or Extra right-hand hole For wall hanger (included) or Extra left-hand hole Faucet holes on centers: For exposed bracket support For wall hanger (included) or For wall hanger (included) or Extra right-hand hole For wall hung sink thru bolt support on backsplash for wall anchors For wall hanger (included) or Extra left-hand hole Single center faucet hole (Illus.): For exposed bracket support Shown with metering faucet (not included) For wall hanger (included) or For wall hanger (included) or Extra right-hand hole For wall hanger (included) or Extra left-hand hole Nominal Dimensions: 521 x (20-1/2" x ) Bowl sizes: 381mm (15") wide 2 (10") front to back 165mm (6-1/2") deep Compliance Certifications - Meets or Exceeds the Following Specifications: ASME A for Vitreous China Fixtures SEE REVERSE FOR ROUGHING-IN DIMENSIONS To Be Specified: Color: White Bone Silver Black Linen Faucet: Faucet Finish: Supplies: 1-1/4" Trap: Nipple: Bracket Support (by others): Concealed Arms Support (by others): See faucet section for additional models available MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE- LINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES. Top of front rim mounted 864mm () from finished floor. M23

2 " CTRS FOR HANGER OR -HUNG LAVATORY " CTRS FOR HANGER OR EXTRA RIGHT HAND HOLE 152 mm (6) DIA. ACCESS CONC. ARMS 3 10mm (3/8") () 2 (11-1/4") mm () (6) DIA. 3 10mm (3/8") (2-1/8") 2 (11-1/4") 29 () (2-1/8) DIA. 864mm () () () (6) (6) (2) (2) DIMENSIONS SHOWN FOR LOCATION OF AND P TRAP ARE SUGGESTED. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS. CONCEALED ARM SUPPORT TO BE FURNISHED BY OTHERS. SET AT 864MM () ABOVE AS America Inc. M24 Revised 8/12

3 " CTRS FOR HANGER OR EXTRA LEFT HAND HOLE -HUNG LAVATORY " CTRS FOR HANGER OR (2-1/8") () () (6) DIA. 3 10mm (3/8) 1-1/4 O.D. WASTE (2-1/8) DIA. 2 (11-1/4") mm () (6) DIA. ACCESS HOLES FOR CONC. ARMS 3 (1-1/2") 10mm (3/8") DIA. ANCHOR 27mm x 14mm (1-1/16 x 5/16") SLOTS 260mm mm (31) 864mm (34) (6) () (6) () (2) (2) DIMENSIONS SHOWN FOR LOCATION OF AND P TRAP ARE SUGGESTED. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS. CONCEALED ARM SUPPORT TO BE FURNISHED BY OTHERS. SET AT 864MM () ABOVE. M25

4 " CTRS FOR HANGER OR EXTRA RIGHT HAND HOLE -HUNG LAVATORY " CTRS HUNG FOR SINK THRU HANGER BOLT SUPPORT ON CONCEALED BACKSPLASH ARMS FOR EXTRA ANCHORS RIGHT HAND HOLE (2-1/8") () () (6) DIA. (6) DIA. 343mm (13-1/2") DIA. 64mm (2-1/2") 3 10mm (3/8") (11/2") DIA. ANCHOR 203 mm mm 787mm (31) 864mm (34) 3 10mm (3/8") (11/2") DIA. ANCHOR 203 mm mm 787mm (31) 864mm (34) () () (6) (6) (2) (2) DIMENSIONS SHOWN FOR LOCATION OF AND P TRAP ARE SUGGESTED. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS. CONCEALED ARM SUPPORT TO BE FURNISHED BY OTHERS. SET AT 864MM () ABOVE. M26

5 " CTRS FOR HANGER OR EXTRA LEFT HAND HOLE -HUNG LAVATORY SINGLE CENTER HOLE FOR HANGER OR (6) DIA. (2-1/8") 3 10mm (3/8") 521 mm 13 mm 260mm () mm () (6) DIA. DIA. STD. OUTLET 3 10mm (3/8") (1-3/8") DIA. PUNCHING () 864mm () (6) () (6) () (2) (2) DIMENSIONS SHOWN FOR LOCATION OF AND P TRAP ARE SUGGESTED. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS. CONCEALED ARM SUPPORT TO BE FURNISHED BY OTHERS. SET AT 864MM () ABOVE. M27

6 SINGLE CENTER HOLE FOR HANGER OR WITH EXTRA RIGHT HAND HOLE -HUNG LAVATORY SINGLE CENTER HOLE FOR HANGER OR WITH EXTRA LEFT HAND HOLE (6) DIA. (1-3/4) DIA. STD. OUTLET 3 10mm (3/8") (1-3/8) DIA. PUNCHING (2-1/8") 864mm () () (2-1/8) (6) DIA. 3 10mm (3/8") DIA. STD. OUTLET (1-3/8") DIA. PUNCHING () 864mm () (6) () (2) (6) () (2) DIMENSIONS SHOWN FOR LOCATION OF AND P TRAP ARE SUGGESTED. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS. CONCEALED ARM SUPPORT TO BE FURNISHED BY OTHERS. SET AT 864MM () ABOVE. M28