15T Hoist and Trolley TMH15000/5 AT15S DRG /02/ ,50 1 / 1. If In Doubt Ask REVISION HISTORY. Part Number D01-AHT28 REV0.

Size: px
Start display at page:

Download "15T Hoist and Trolley TMH15000/5 AT15S DRG /02/ ,50 1 / 1. If In Doubt Ask REVISION HISTORY. Part Number D01-AHT28 REV0."

Transcription

1 REVISION HISTORY REV. DATE APPROVED D-AHT REV Part Number DRG Title of Part Title of Project Scale not to scale Designed By Drawn By Checked By Approved By Surname T. Mikolajewski T. Mikolajewski B. Aitken T Hoist and Trolley / Linear up to, over up to, over up to, over up to, over up to, over kg Weight Angular, Surface Roughness If In Doubt Ask TMH/ ATS Sheet Size A Material Signature unless otherwise specified all dimensions are in milimeters Tolerances // // Revision // Replaces Drawing N Profile Number, Ø max. 6

2 REVISION HISTORY REV. DATE APPROVED D-AHT REV A A REV. PARTS LIST DESCRIPTION Load Bar (Range I Flange mm) Motor Plate Side Plate Gear Wheel Plain Wheel Deep groove ball bearings single row with two Z shields SKF Spring Retaining Ring Spring Retaining Ring Hex Nut Spacer Spacer Washer Tie Rod Anti Tip Roller Hex Nut PART NUMBER DRG DRG DRG DRG DRG DIN 6 SKF SKF 6 Z DIN x DIN 6 x, ISO M6 DRG DRG DRG DRG ISO M Buffer ISO M6 DIN A 6, DIN M6 x ISO M DIN M x DRG DIN 6 A x x DIN, DIN M x QTY A Hex Nut Washer Hex Nut Hexagon Socket Set Screw Pinion Shaft (for Gearbox Nord) Parallel Key Washer Air Motor GLOBE VS6C ITEM 6 Split Pin M NordLock Washer Large Diameter Glued Pair Washer Split Pin Washer NORD SKSI6FH IEC (:) Hex Head Bolt Title of Part Pilot Valve and Silencers ISO x NLsp DIN A ISO x DIN A 6 SKSI6FH IEC (ratio ) ISO M x Material 6 6 Part Number DRG D TE AIR TROLLEY (ATS) / Signature Surname unless otherwise specified all dimensions are in milimeters Tolerances // // tomasz E. Crichton Linear up to, over up to, over up to, over up to, over up to, over N/A Weight Revision // A :6 Scale Title of Project Designed By Drawn By Checked By Approved By Replaces Drawing B. Aitken N Sheet Size A Angular, Surface Roughness Profile Number If In Doubt Ask TE HOIST AND TROLLEY max. Ø Ø

3 REVISION HISTORY REV. DATE APPROVED // W. Morrison D-AHT REV Part Number DRG / unless otherwise specified all dimensions are in milimeters Tolerances // Linear N/A Weight Revision A A A : Scale Designed By Surname T. Mikolajewski Drawn By E. Crichton Checked By Approved By B. Aitken A Title of Project up to, over up to, over up to, over up to, over up to, over Replaces Drawing N Angular, Surface Roughness If In Doubt Ask Material Sheet Size A EN6 Title of Part T Top Eye TMH/ ATS Profile Number R plcs 6 Ø R plcs +, 6,, 6 Ø +,, // Signature //

4 REVISION HISTORY REV. DATE APPROVED D-AHT REV REV. PARTS LIST DESCRIPTION Top Block Plate I Top Block Plate II Top Block Plate III Top Block Plate IV Wheel Shaft Needle roller bearings, drawn cup without inner rings Needle Bearing Seal xx Type G Low Cross Section Parallel Pin Pocket Wheel (x6 chain) Inner Bearing Slip Ring M NordLock Washer Large Diameter Glued Pair Hook Parallel Pin Title of Part Part Number Top Block DRG / // PART NUMBER DRG DRG DRG DRG 6 DRG ISO D x x Gxx ISO h x TMH PW TMH SR NLsp DIN M x. x DIN M x DIN M x 6 DIN M x DRG ISO h x Material QTY ITEM 6 6 :, Scale Signature Surname unless otherwise specified all dimensions are in milimeters Tolerances 6// T. Mikolajewski Designed By T. Mikolajewski Drawn By Linear up to, over up to, over up to, over up to, over up to, over 6. kg Weight Revision // Checked By Replaces Drawing B. Aitken Approved By Angular, Surface Roughness, Title of Project N Profile Number If In Doubt Ask TE / F Air Hoist Sheet Size A

5 REVISION HISTORY REV. DATE APPROVED D-AHT REV D D REV. PARTS LIST DESCRIPTION Bottom Block Plate I Bottom Block Plate II Bottom Block Plate III Bottom Block Plate IV Wheel Shaft Pocket Wheel (x6 chain) Inner Bearing Slip Ring Needle roller bearings, drawn cup without inner rings Needle Bearing Seal xx Type G Low Cross Section Parallel Pin Thrust Ball Bearing Parallel Pin Hexagon Socket Set Screw Hook Thrust Ring Lubricating Nipple, coned Type A M NordLock Washer Large Diameter Glued Pair Chain Joint Pin M6 NordLock Washer Large Diameter Glued Pair Hook Title of Part Part Number Bottom Block DRG / // PART NUMBER DRG DRG DRG DRG DRG TMH PW TMH SR ISO D x x Gxx ISO h x DIN x x ISO h x DIN M x DRG DIN AM x coned short NLsp DRG NL6sp DIN M x DIN M6 x DIN M x DIN M x DIN M x DIN M x. x DRG Material QTY ITEM 6 6 Signature Surname A A C C D D B B Title of Project 6 Designed By Drawn By Checked By Approved By T. Mikolajewski T. Mikolajewski B. Aitken :, Scale unless otherwise specified all dimensions are in milimeters Tolerances 6// Linear up to, over up to, over up to, over up to, over up to, over 6. kg Weight Angular, Surface Roughness If In Doubt Ask TE / F Air Hoist Sheet Size A Revision Replaces Drawing Profile Number // N 6 6

6 Hoist Body - TMH-/-ATS.. D-AHT REV

7 Hoist Body - TMH-/-ATS.. D-AHT REV Fig. No. Part Number Part Name Parts Per Hoist 6 MOTOR CASE 6 REAR PLATE 66 CYLINDER 6 ROTOR 6 FRONT PLATE VANE 6 LIFT SPRING 6J LIMIT SPOOL 6J LIMIT SPOOL BUSHING 6J LIMIT RETAINER F 6 6J6 LIMIT RETAINER B 6 6J LIMIT PLUG 6 6Z SPRING SEAT 6 6 SPRING X6X 6 66 LIMIT SHAFT 6 6A LIMIT SHAFT BUSHING 66 6 LIMIT LEVER 6 6J LIMIT WASHER 6 6 ROLLER SHAFT 6 DRG66- CHAIN LEVER 6 MOTOR GASKET 6KB SILENCER M CP BEARING 6ZZ BEARING 6 6 NEEDLE BEARING TAZ HEX SOCKET HEAD CAP SCREW MX 6 HEX SOCKET HEAD CAP SCREW MX 6 HEX SOCKET SET SCREW M6X HEX SOCKET SET SCREW MX 6 HEX NUT M6 O-RING S- 6 O-RING S- O-RING S-6 O-RING S- O-RING S-6 6 O-RING P- 6 6 DUST SEAL OS 6 SPRING PIN X 6 SPRING PIN X 6 SPRING PIN X RETAINING RING H- RETAINING RING H- RETAINING RING S- RETAINING RING E- SPLIT PIN.X 6A CENTRE HOUSING 6A LOAD SHEAVE 6 COUPLING 6 CHAIN GUIDE 66 CHAIN SEPARATOR 6 HANGER PIN Fig. No. Part Number Part Name Parts Per Hoist 6 6 DOWEL PIN BEARING 6 BEARING 6ZZ BEARING 6ZZ HEX SOCKET HEAD CAP SCREW MX HEX SOCKET SET SCREW MX U NUT M WASHER M O-RING S- 6 AHC/RT/RUD LINK CHAIN mm HOL 6 BRAKE COVER 6 BRAKE PISTON 6 BRAKE DISK SPRING.X.X. NAME PLATE 6 HEX SOCKET HEAD CAP SCREW M6X 6 HEX SOCKET SET SCREW MX O-RING AS6-6 GEAR CASE 6A6 FIRST PINION 6A FIRST STAR GEAR 6A FIRST PIN 6E FIRST RING GEAR 6E SECOND PINION 6 6E SECOND STAR GEAR 6E SECOND PIN 6E SECOND RING GEAR 6K THIRD PINION 6K THIRD STAR GEAR 6K THIRD PIN 6K THIRD RING GEAR 6 CAGE 6 SPACER 6 BRAKE PLATE 6 6K6 CHAIN SET PIN 6K SECOND THRUST WASHER 6 BEARING 6ZZ BEARING 6 BEARING 6 6 BEARING 66 6 NEEDLE BEARING TA6Z 6 6 NEEDLE BEARING TA66Z NEEDLE BEARING TAZ HEX SOCKET HEAD CAP SCREW MX 6 6 HEX SOCKET HEAD CAP SCREW M6X WASHER M O-RING S- 6 O-RING S- 6 O-RING S- O-RING AS6- O-RING AS6-

8 Hoist Body - TMH-/-ATS.. D-AHT REV Fig. No. Part Number Part Name Parts Per Hoist 6 RETAINING RING S-6 RETAINING RING S- SP[LIT PIN X

9 Pendant Body - TMH-/-ATS.. D-AHT REV

10 Pendant Body - TMH-/-ATS.. D-AHT REV Fig. No. Part Number Part Name Parts Per Hoist 6J THROTTLE VALVE 6E VALVE BUSHING (U) 6F VALVE BUSHING (D) 6C SPRING SEAT 6A VALVE CAP 6 66 VALVE BODY 6A BUSH CAP 6C6 PISTON 6 EXHAUST PLATE SILENCER (SS) 6 SILENCER (SL) SILENCER (F) SPRING.X6X. SPRING 6X.X.6 6 VALVE GASKET 6 6 BEARING KB 66 HEX SOCKET HEAD CAP SCREW M6X6 6 HEX SOCKET HEAD CAP SCREW M6X HEX SOCKET BUTTON SCREW MX 66 HEX SOCKET SET SCREW M6X6 HEX SOCKET SET SCREW MX O-RING S- 6 O-RING S- O-RING S- 6 O-RING S- 6 O-RING AS6- O-RING AS6- (HS) 6 SPRING PIN X RETAINING RING S- 6 RETAINING RING H-6 RETAINING RING H- 6G6B INLET BUSHING CP 6 HEX SOCKET HEAD CAP SCREW M6X HEX SOCKET HEAD PLUG PT/ O-RING S- O-RING S- O-RING AS6-6 6 SPRING PIN X 6 UNDER COVER 6G MAIN CUT BUSHING 6G MAIN CUT VALVE 6G MAIN CUT CAP 6H MAIN CUT HOLDER 6 MAIN CUT SEAT 6 6 PILOT SILENCER 6 HEX SOCKET HEAD CAP SCREW M6X HEX SOCKET HEAD CAP SCREW MX HEX SOCKET SET SCREW MX HEX SOCKET SET SCREW MX 6 6 CROSS-RECESSED HEAD SCREW MX6 HEX NUT M RETAINING RING H- Fig. No. Part Number Part Name Parts Per Hoist O-RING S- O-RING S-6 6 O-RING S- O-RING S- O-RING AS6-

11 Cord Body - TMH-/-ATS.. D-AHT REV

12 Cord Body - TMH-/-ATS.. D-AHT REV Fig. No. Part Number Part Name Parts Per Hoist 6J THROTTLE VALVE 6E VALVE BUSHING (U) 6F VALVE BUSHING (D) 6C SPRING SEAT 6A VALVE CAP 6 66 VALVE BODY 6A BUSH CAP 6C6 PISTON 6 EXHAUST PLATE SILENCER (SS) 6 SILENCER (SL) SILENCER (F) SPRING.X6X. SPRING 6X.X.6 6 VALVE GASKET 6 6 BEARING KB 66 HEX SOCKET HEAD CAP SCREW M6X6 6 HEX SOCKET HEAD CAP SCREW M6X HEX SOCKET BUTTON SCREW MX 66 HEX SOCKET SET SCREW M6X6 HEX SOCKET SET SCREW MX O-RING S- 6 O-RING S- O-RING S- 6 O-RING S- 6 O-RING AS6- O-RING AS6- (HS) 6 SPRING PIN X RETAINING RING S- 6 RETAINING RING H-6 RETAINING RING H- 6G6B INLET BUSHING CP 6 HEX SOCKET HEAD CAP SCREW M6X O-RING S- O-RING AS6-6 6 SPRING PIN X K PLUG RETAINING PLUG S- UNDER COVER 6 O-RING S- S-TYPE WIRE CHANGE CORD.M 666 GRIP (W) 6666 GRIP (R) 666 HANDLE

13 D-AHT REV 6 6 RED ROOSTER STATION PENDANT - RRI-VTP ITEM PART NO. DESCRIPTION QTY P M x SCREW HEAD E/STOP/GUARD GUARD FOR EMERGENCY STOP /P M NYLOCK BIK6P-BS E-STOP BUTTON P / TO 6mm BANJO 6 6 P ELBOW 6mm P WAY JUNCTION P mm TO 6mm REDUCER P Y BRANCH BIK--P-VALVE PENDANT VALVE P / TO 6mm PUSH FIT TP//HOUS STATION HOUSING P6 / to mm PUSHFIT BIK----B-COVER COVER FOR BIK VALVES XAC-B-LEGEND-UP UP LEGEND 6 XAC-B-LEGEND-DOWN DOWN LEGEND XAC-B-LEGEND-RIGHT RIGHT LEGEND XAC-B-LEGEND-LEFT LEFT LEGEND HP 6mm SMC TUBE HP mm SMC TUBE D-P REV

14 D-AHT REV 6 6 RED ROOSTER STATION PENDANT - RRI-VTPM ITEM PART NO. DESCRIPTION QTY P M x SCREW HEAD E/STOP/GUARD GUARD FOR EMERGENCY STOP /P M NYLOCK NUT BIK6P-BS EMERGENCY STOP BUTTON P / TO 6mm BANJO 6 6 P º ELBOW 6mm P WAY JUNCTION P mm to 6mm REDUCER P Y BRANCH BIK--P-VALVE PENDANT VALVE P / TO 6mm PUSHFIT TP//HOUS/M STATION PENDANT BIK---BCOVER COVER FOR BIK VALVES XAC-B-LEGEND-UP UP LEGEND 6 XAC-B-LEGEND-DOWN DOWN LEGEND XAC-B-LEGEND-RIGHT RIGHT LEGEND XAC-B-LEGEND-LEFT LEFT LEGEND HP 6mm SMC TUBE 6 P / TO 6mm BULKHEAD AND NUT 6 DRG 6- PLATE P/ / BSP NIPPLE C/W CONE 6 P M6 x HEX BOLTS P M6 NYLOC NUT 6 P M6 WASHER P6/ / BSP SWIVEL TO / HOSE TAIL 6 P/ / HOSE FERRULES D-P REV 6

12T Hoist and Trolley TMH12000/4 AT10S DRG /02/ / 1. If In Doubt Ask REVISION HISTORY. Part Number D01-AHT27 REV0.

12T Hoist and Trolley TMH12000/4 AT10S DRG /02/ / 1. If In Doubt Ask REVISION HISTORY. Part Number D01-AHT27 REV0. D-AHT REV REVISION HISTORY REV. DATE APPROVED Part Number DRG Title of Project Scale Not to scale Designed By Drawn By Checked By Approved By Surname T. Mikolajewski T. Mikolajewski B. Aitken Title of

More information

0,25T Hoist and Trolley TCR 250 AT2S DRG /01/ / 1. If In Doubt Ask REVISION HISTORY. Part Number. 32kg Weight REV.

0,25T Hoist and Trolley TCR 250 AT2S DRG /01/ / 1. If In Doubt Ask REVISION HISTORY. Part Number. 32kg Weight REV. D-AHT REV REVISION HISTORY REV. DATE APPROVED Scale not to scale Part Number DRG Designed By Drawn By Checked By Approved By Sheet Size A Material Surname T. Mikolajewski T. Mikolajewski B. Aitken Title

More information

12T Low Headroom Hoist TMH LHR DRG min. 07/03/ max n 84 1 / 1. If In Doubt Ask. 0 10/05/2018 W.

12T Low Headroom Hoist TMH LHR DRG min. 07/03/ max n 84 1 / 1. If In Doubt Ask. 0 10/05/2018 W. REVISION HISTORY REV. DTE PPROVED // W. Morrison D-HT7 REV - Ø max. 6min. n 67 6 Part Number DRG 7- Title of Part T Low Headroom Hoist / Title of Project Scale not to scale Designed By Drawn By Checked

More information

GENERAL ASSEMBLY TCR 2000/2 1:4 DRG 1368D 10 25/01/ / 1. If In Doubt Ask REVISION HISTORY. Part Number. 7.5 kg D01-AH6 REV0 REV.

GENERAL ASSEMBLY TCR 2000/2 1:4 DRG 1368D 10 25/01/ / 1. If In Doubt Ask REVISION HISTORY. Part Number. 7.5 kg D01-AH6 REV0 REV. REVISION HISTORY REV. DATE APPROVED 0 Part Number DRG 1368D 10 Title of Part GENERAL ASSEMBLY 1:4 Scale Designed By Drawn By Checked By Approved By Surname Adam Migala E. Crichton B. Aitken Title of Project

More information

6T Low Headroom Hoist TMH 6000 LHR DRG /02/ / 1. If In Doubt Ask REVISION HISTORY. 0 10/05/2018 W. Morrison. Part Number.

6T Low Headroom Hoist TMH 6000 LHR DRG /02/ / 1. If In Doubt Ask REVISION HISTORY. 0 10/05/2018 W. Morrison. Part Number. REVISION HISTORY REV. DTE PPROVED // W. Morrison D-HT REV Ø max. 9 9 Part Number DRG Scale not to scale Title of Part T Low Headroom Hoist Designed By Drawn By Checked By pproved By Sheet Size Surname

More information

132,5 572,5 (distance between the centres of the wheels) 50 max. DESCRIPTION REV. Trolley 2 1 DRG Bottom Block

132,5 572,5 (distance between the centres of the wheels) 50 max. DESCRIPTION REV. Trolley 2 1 DRG Bottom Block 5 65,5 57,5 (distance between the centres of the wheels) 8 7 67 79 Ø5 5 max. 5 75 6 5 75 ITEM QTY PART NUMBER DESCRIPTION REV. DRG 5 Trolley DRG 5 Bottom Block TNC TWAL TE Air Title of project Material

More information

red rooster 2TE Air Trolley (2TE/AT/4) 2TE Air Hoist DESCRIPTION 3 1 DRG TCR 2000C2 2TE Hoist and Trolley 17/07/ kg

red rooster 2TE Air Trolley (2TE/AT/4) 2TE Air Hoist DESCRIPTION 3 1 DRG TCR 2000C2 2TE Hoist and Trolley 17/07/ kg ITEMQTYPART NUMBER DRG 5- TCR C 3 DRG 5- DESCRIPTION TE Air Trolley (TE/AT/) TE Air Top Eye TE and Trolley 7/7/3-65kg Title of project Material Weight REV. Designed by Checked by Approved by B. Aitken

More information

red rooster REV. TCR500 / TCR 1000 Link Plate 2TE Air Trolley (2TE/AT/4) DESCRIPTION Air Hoist PART NUMBER DRG TCR 1000 DRG

red rooster REV. TCR500 / TCR 1000 Link Plate 2TE Air Trolley (2TE/AT/4) DESCRIPTION Air Hoist PART NUMBER DRG TCR 1000 DRG ITEM QTY PART NUMBER DRG 5- TCR DRG 5- DESCRIPTION TE Air Trolley (TE/AT/) Air TCR5 / TCR Link Plate TE and Trolley 6/6/ - 6kg Title of project Material Weight REV. Designed by Checked by Approved by B.

More information

Signature. Date. Surname. 30 max.

Signature. Date. Surname. 30 max. ITEM QTY PART NUMBER DRG - DRG - DRG - DRG 9- TCR DESCRIPTION Trolley Low Headroom Frame TCR / TCR Link Plate Spacer Air Hoist Title of project Date Material Weight Designed by Approved by Surname Date

More information

Brake Gears Suspension Body - TCS

Brake Gears Suspension Body - TCS Brake Gears Suspension Body - TCS-980 Brake Gears Suspension Body - TCS-980 100 426230A00 CENTRE HOUSING 1 101 426230A50 LOAD SHEAVE 1 102 426230200 COUPLING 1 103 426230350 CHAIN GUIDE 1 104 426230360

More information

Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4

Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016

More information

PARTS LIST. Model MFT-HD Cleco

PARTS LIST. Model MFT-HD Cleco PARTS LIST Model MFT-HD Cleco 0 0 0 0 0 0 0 0 HD-0- Centershaft HD-0- Centershaft Screw HD-0- Lift Collar HD-0- Eyebolt HD-0- Hex Nut HD-0- Draw Rod HD-0- Washer - Draw Rod HD-0- Face Plate, " Diameter

More information

Diesel Pile Hammer D30-32 Part # 66508

Diesel Pile Hammer D30-32 Part # 66508 Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner

More information

Parts Catalog Collector 34 Model Gasoline

Parts Catalog Collector 34 Model Gasoline Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-10)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering V (97104640)... 10 Travel drive, part 1

More information

Diesel Hammer Model D19-42 Part #

Diesel Hammer Model D19-42 Part # Diesel Hammer Model D19-42 Part # 120491 2 Diesel Pile Hammer Part # 120941 Pos Order No. Pg Description Qty 120941 Diesel Pile Hammer D19-42 (Bauer MNR:426514) 1 160198 4 Cylinder Lower Part cmpl 1 2

More information

MODEL D DIESEL PILE HAMMER

MODEL D DIESEL PILE HAMMER AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" SLIDING COMPOUND MITER SAW

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12 SLIDING COMPOUND MITER SAW PAGE 1 OF 6 BASE ASSEMBLY 00 0 CATALOG NO. EXAMPLE: SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 6955-20 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510 M5 x 12mm Flat Head T-20 Screw (5) 3 05-81-0135

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27B

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12 DUAL BEVEL COMPOUND MITER SAW B27B PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS = Part number change from previous service

More information

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

Printed from MediaCat

Printed from MediaCat Illustration A Crankcase, Crankshaft Illustration A Crankcase, Crankshaft Ref.Nr. Item code Quantity Description 1 1111 020 2116 1 Crankcase 2-7 2 9371 470 3120 2 Cylindrical pin 6x20 3 9022 341 1010 10

More information

Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836

Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836 Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690036 Ph.: 800-274-6848 Revision C 11/2014 www.jettools.com

More information

EXPLODED VIEW. Dake Corporation 724 Robbins Road Grand Haven, MI

EXPLODED VIEW. Dake Corporation 724 Robbins Road Grand Haven, MI EXPLODED VIEW *Exploded view is only for 350CE Cold Saw with Frequency Drive Motor* 21 REV032019 350CE Frequency Drive Gearbox: Part Description Part Number Part Description Part Number Oil Seal 86000000

More information

HYDRAULIC CONTROL DETAILS PARTS LIST

HYDRAULIC CONTROL DETAILS PARTS LIST Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank

More information

Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw

Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw 136 137 135 134 132 131 133 113 114 115 117 116 118 119 120 121 79 78 77 107 108 65 76 110 109 66 10 9 6 11 5 4 8 7 75 74 73 72 111 112

More information

Model No: TC10. Parts Information: Tyre Changer - Automatic

Model No: TC10. Parts Information: Tyre Changer - Automatic Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10

More information

Parts Catalog Collector 34 Model Battery

Parts Catalog Collector 34 Model Battery Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-20)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering B (97104855)... 10 Travel drive, part 1

More information

Main Drive Components

Main Drive Components Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor

More information

1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *

1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * * -I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()

More information

535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.

535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A. Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar

More information

Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model:

Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model: , 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.

More information

CUT WHEEL FRAME ASSY

CUT WHEEL FRAME ASSY CUT 4-5-01 WHEEL FRAME ASSY NO. PART NO. PART DESCRIPTION QTY UNIT PRICE EUR & USD 2015 01-1 CUT 4-5 - FN.B-M10x25-8.8-DIN-2 BOLT 4 0,28 01-2 CUT 4-5 - HSPG.W10-DIN-2 SPRING WASHER,TANG ENDS 4 0,14 01-3

More information

RYOBI 10 in. TABLE SAW - MODEL NO. BT3000

RYOBI 10 in. TABLE SAW - MODEL NO. BT3000 FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR

More information

Di-Acro 18E Stylus Turret Punch Press

Di-Acro 18E Stylus Turret Punch Press OPERATOR S MANUAL & INSTRUCTIONS Di-Acro E Stylus Turret Punch Press Di-Acro, Incorporated PO Box 00 Canton, Ohio Progress Street N.E. Canton, Ohio 0 0-- 0--00 (fax) Revised 0/0 Sale or distribution of

More information

PARTS LIST: Air Control Assembly (1632 Sander)

PARTS LIST: Air Control Assembly (1632 Sander) PARTS LIST: Air Control Assembly (1632 Sander) 1 6293482 Filter... 1 2 6293483 Solenoid Valve... 1 3 6293484 Brake Cylinder... 1 4 6293485 Multi-Hole Connector... 1 5 6293486 Air Valve... 1 6 6293487 Air

More information

DynaPower Generation II

DynaPower Generation II DynaPower Generation II Return to DYNAPOWER index Return to MAIN index DYNAPOWER MODEL 4.8 & 6.0 VARIABLE PUMP PARTS DRAWING 1 DYNAPOWER MODEL 4.8 & 6.0 VARIABLE PUMP PARTS DRAWING 2 DYNAPOWER MODEL 4.8

More information

15. Spare part list. Typing. Fabrikationsnr.: Type no.: Prod. no.: Prod. nr.: Ballart nr.: Årgang: Max. arb. tryk: Year: Max.

15. Spare part list. Typing. Fabrikationsnr.: Type no.: Prod. no.: Prod. nr.: Ballart nr.: Årgang: Max. arb. tryk: Year: Max. 15. Spare part list Typing. Type no.: Ballart nr.: Fabrikationsnr.: Prod. no.: Prod. nr.: Årgang: Year: Jahr: Max. arb. tryk: Max. pressure: Max. Druck: Egenvægt: Own weight: Eigengewicht: Spænding: Voltage:

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

RP-VE416FS/FSD VE416FS and VE416FSD Roll Grooving Tools

RP-VE416FS/FSD VE416FS and VE416FSD Roll Grooving Tools PARTS ORDERING INFORMATION When ordering parts, the following information is necessary for Victaulic to process the order promptly: 1. Tool Model Number VE416FS or VE416FSD 2. Tool Serial Number The Serial

More information

Illustrated Pats List

Illustrated Pats List Illustrated Pats List Automatic Lawn Tractor Models 0 0 0 Model 0 Shown IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY Warning: This unit is equipped with an internal combustion engine and should

More information

PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V

PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V UPPER ASSEMBLY 101 6190481 THROTTLE CABLE FOR MODELS WITH ADDITIONAL CHOKE CABLE 1 101 6190751 THROTTLE CABLE FOR MODELS WITH OUT ADDITIONAL

More information

Parts Catalog MIXERS

Parts Catalog MIXERS Parts Catalog MIXERS MODELS: SP20 & SPC20 SP20 0--2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River

More information

HR24TS Rotary Rake. Serial Numbers less than Illustrated Parts Breakdown. Curtain & Guards, Front

HR24TS Rotary Rake. Serial Numbers less than Illustrated Parts Breakdown. Curtain & Guards, Front HRTS Rotary Rake Serial Numbers less than 00 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page Page Page Tongue Front Frame Front Axle Curtain & Guards, Front Front Pivot Bridge

More information

Parts List: Head Assembly

Parts List: Head Assembly Head Assembly 23 Parts List: Head Assembly Index No. Part No. Description Size Qty 1...JWP15H-001... Head Casting......1 2...TS-1525021... Set Screw... M10x12...8...JWP15DX-CA... Cutter Head Assembly (Index

More information

HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog INDEX HOME TRACTOR ATTACHMENTS APPLICATION CHART

HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog INDEX HOME TRACTOR ATTACHMENTS APPLICATION CHART R Ingersoll HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog 8-3091 HOME TRACTORS ATTACHMENTS PAINT GENERAL INFO INDEX Deck. Belt and Idler Pulley...5 Mounting Bracket...7 Rear Wheels...7 Hydraulic Drive...9-13

More information

MAKING AGRICULTURE MORE ECONOMICAL

MAKING AGRICULTURE MORE ECONOMICAL PARTS CATALOGUE VICTOR SERIES ROTARY TILLER MAKING AGRICULTURE MORE ECONOMICAL PM /REV. / SR NO MANUAL CODE MATERIAL DESCRIPTION QTY N/A AIR BREATHER /2" BSP (GTSR38) 2 3330 DIPSTICK 87MM (/2" BSP) 3

More information

Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head

Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise

More information

Main Components. Pipe and Bolt Threading Machine 300/300A. Early Style. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.

Main Components. Pipe and Bolt Threading Machine 300/300A. Early Style. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A. Pipe and Bolt Threading Machine 00/00A Main Components Early Style 0 0 * 0 0 0 For Information on Cutters, Die Heads and Reamers SEE INDEX Ref. 0 0 Catalog 0 00 00 0 0 0 00 0 0 0 0 0 0 0 00 0 00 00 00

More information

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,

More information

Parts Catalog Admiral 28 Cylindrical Scrubber

Parts Catalog Admiral 28 Cylindrical Scrubber Parts Catalog Table of Contents Front bounce protection (97116834)... 4 Wheel suspension (97103725)... 6 Chassis (97115422)... 8 (97114763)... 10 Steering (97073738)... 12 Seat bracket (97118616)... 14

More information

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP

More information

SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE

SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026

More information

SPARE PARTS LIST MODEL NO PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE

SPARE PARTS LIST MODEL NO PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE PAGE 1 001 342186-7 SWITCH PROTECTOR 1 002 911118-1 PAN HEAD SCREW M4X12 6 003 155512-9 SWITCH PLATE 1 004 651757-2 SWITCH ABK266 1 006 685712-2 SPONGE SHEET 60X60 1 007 911118-1 PAN HEAD SCREW M4X12 1

More information

Parts Catalog MIXERS

Parts Catalog MIXERS Parts Catalog MIXERS MODELS: SP0 & SPC0 SP0-3-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River

More information

12. Mechanical Drawings & Parts Breakdown List

12. Mechanical Drawings & Parts Breakdown List 12. Mechanical Drawings & Parts Breakdown List Note: When ordering parts, please be prepared with, 1. Machine model & serial number. 2. Item number. 3. Part number and description. 4. Year of Production.

More information

EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8

EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8 EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8 KC-5 KC-8 Pump RPM 638 1022 Motor HP (kw) 0.33 (0.25) 0.50 (0.37) Oil Capacity, qts. (liters) 0.8 (0.76) Forced Drain w/ open suction, qts. (liters) 0.85 (0.80)

More information

Parts Catalog. S-Series Slicer Smart Manual SG13. Model:

Parts Catalog. S-Series Slicer Smart Manual SG13. Model: , 07 99507 ECN 065 Parts Catalog S-Series Slicer Smart Manual Model: SG SG 0/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE

More information

Spare part list. piece rotor 110/115V assy. piece motor housing assy. piece stator 115V assy 8. piece grip frame assy 14. piece clutch gear assy 15

Spare part list. piece rotor 110/115V assy. piece motor housing assy. piece stator 115V assy 8. piece grip frame assy 14. piece clutch gear assy 15 cid_etlx V. 0. FEHRMAN For information only, will not be exchanged when altered! Date 8.09.00 0:0 Cnt-no 7369 piece gear housing assy 73730 piece motor V assy 3 73690 piece cylinder 7368 piece motor housing

More information

Parts Catalog MIXERS

Parts Catalog MIXERS Parts Catalog MIXERS MODEL: SP60 & SPC60 SP60 0-2-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River

More information

DIAMOND CONCRETE SAW PARTS LIST MODEL CC1113-XL P R O D U C T S. June Part #

DIAMOND CONCRETE SAW PARTS LIST MODEL CC1113-XL P R O D U C T S. June Part # DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC1113-XL June 013 Part #10 TABLE OF CONTENTS Description Page No. Saw Assembly (Normal Cut).... - Saw Assembly (Up-Cut)...... - Gas Engine Assembly......

More information

Table of Contents. Section H : Gauge Wheels & Mesh Roller. Section H. Call or Northwest Tillers today

Table of Contents. Section H : Gauge Wheels & Mesh Roller. Section H. Call or  Northwest Tillers today Table of Contents Section H Section H : Gauge Wheels & Mesh Roller 6½ Gauge Wheel (SRB4098)... H1 9½ Gauge Wheel (SRB4099)... H2 6½ & 9½ Gauge Wheel Hubs... H3 Heavy Duty Gauge Wheel (SRB4070 & SRB4076)...

More information

PARTS LIST. Clarke CL500M 6 spd. Metal Lathe Part Number: HT HT HT

PARTS LIST. Clarke CL500M 6 spd. Metal Lathe Part Number: HT HT HT PARTS LIST Clarke CL500M 6 spd. Metal Lathe Part Number: - 7610300 Quantity Description Part Number 1 Countersunk Hd, screw m5x14 HT3000101 1 Retaining Ring, 28 HT3000102 1 Bevel Gear HT3000103 1 Washer

More information

Parts List: Column Assembly

Parts List: Column Assembly Column Assembly 39 Parts List: Column Assembly Index No. Part No. Description Size Qty 1... WP2510-401...Idler Support Base... 1 2... TS-1540071...Hex Nut...M10... 2 3... TS-1550061...Flat Washer...M8...

More information

Parts Catalog Apex 47 Series Model Gasoline & LPG

Parts Catalog Apex 47 Series Model Gasoline & LPG Parts Catalog Table of Contents Side brush R.H. (97085690)... 4 Front wheel drive (97086235)... 8 Travelling mechanism (Part 1) (97077168-1)... 12 Travelling mechanism (Part 2) - Accelerator (97077168-2)...

More information

Spare part list. For information only, will not be exchanged when altered! Date. piece Brush holder 220/240V assy 4

Spare part list. For information only, will not be exchanged when altered! Date. piece Brush holder 220/240V assy 4 cid_etlx V. 0. GIESE 0.04.005 7:39 Cnt-no 3304 piece Rotor 0/40V assy 33049 piece Stator 0/40V assy 3 3303 piece Brush holder 0/40V assy 4 33078 piece Electronics ATC 00V-40V SERVICE 5 3304 piece Safety

More information

CHIPPER SHREDDER H524H, HS24W AHS24H, AHS24W Parts Catalog

CHIPPER SHREDDER H524H, HS24W AHS24H, AHS24W Parts Catalog R Ingersoll CHIPPER SHREDDER H524H, HS24W AHS24H, AHS24W Parts Catalog 8-3291 HOME TRACTORS ATTACHMENTS PAINT GENERAL INFO ALPHABETICAL Body, Hopper and Shredder Hammers...5 Chipper Assembly...7 Trailer

More information

Inspection. Assembly Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent.

Inspection. Assembly Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent. 6010-34 Inspection 3. Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent. 3. If spring test equipment is available, check the tension of each spring according to the specifications

More information

SECTION 8: PARTS Main Parts Breakdown

SECTION 8: PARTS Main Parts Breakdown SECTION 8: PARTS 10 Main Parts Breakdown 6 1 7 9 2 4 8 15 60 61 62 63 64 110 11 12 13 18 19 21 17 22 23 24 27 14 25 34 65 35 66 67 83 84 36 37 68 69 85 70 80 86 38 73 81 87 89 82 90 71 72 74 91 79 88 92

More information

HD38, HD58, HD78 REV

HD38, HD58, HD78 REV HD38, HD58, HD78 REV. 07.29.2014 COVER for HD38, HD58, HD78 5 P004868 1/4-20x3/4 Button Head Cap Screw Stainless Steel 2 6 P001450 Lockwasher - Internal Tooth.250 6 8 P005200 Wave Disc Washer 4 10 P004869

More information

RYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET

RYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding

More information

EXPLODED PARTS LIST VSS 60

EXPLODED PARTS LIST VSS 60 Page(s): / ENGINE Page(s): / No Code Name Qty No Code Name Qty 05083 Handle assembly 05076 Connecting rod 3 Box Hex locking nut M8 7 5 Washer 8xx 6 Hex locking nut M6 7 T bolot M8x 8 Pin with hole 9 0506

More information

PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE DRILLS

PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE DRILLS NON-REVERSING HANDLE ASSEMBLY (SERIAL NO S. STARTING WITH B & D ) PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE DRILLS Form A277D Date 2008July11/C Page 1 of 8 4. 14309 Ring O 5. 14312 Ring O 12. 54156

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in

More information

MODEL W " WIDE BELT SANDER PARTS LIST. Phone: On-Line Technical Support:

MODEL W  WIDE BELT SANDER PARTS LIST. Phone: On-Line Technical Support: MODEL W1710 24" WIDE BELT SANDER PARTS LIST Phone: 1-360-734-3482 On-Line Technical Support: tech-support@shopfox.biz COPYRIGHT SEPTEMBER, 2003 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS

More information

Assembly Diagram for DH 50MB

Assembly Diagram for DH 50MB Assembly Diagram for --- 1 --- CODE 1 313-415 FRONT CAP 1 2 318-608 GRIP 1 3 318-590 STOPPER RING 1 4 313-413 NEEDLE HOLDER 1 5 313-419 RETAINER SPRING 1 6 318-589 SPRING HOLDER 1 7 880-810 NYLOCK HEX.

More information

CYLINDER 1. Ref. Part No. Number Description Qty Remarks

CYLINDER 1. Ref. Part No. Number Description Qty Remarks A1 A2 A3 A4 CYLINDER 1 1 7LV-11102-10-00 CYLINDER HEAD ASSEMBLY. 1 2 7LV-11165-01-00 PLATE, BREATHER......... 1 3 7LV-11163-01-00 ELEMENT................ 1 4 (90109-06514-00) BOLT.................... 1

More information

MODEL RA-200N RADIAL ARM SAW

MODEL RA-200N RADIAL ARM SAW ITEM NO PART NO DESCRIPTION PRICE 1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900079 CONICAL SPRING 16.3 X 31.5 X 1.2 0.78 3 6940444 OUTER FLANGE 4.49 4 6940443 INNER FLANGE 4.91 5 6100509 PARALLEL

More information

-en. Belt Drive Walk Behind Commercial Mower 32" 36" s:: ~ en ~ AHA~~ COMPANY! www. BradleyMowers.com

-en. Belt Drive Walk Behind Commercial Mower 32 36 s:: ~ en ~ AHA~~ COMPANY! www. BradleyMowers.com Belt Drive Walk Behind Commercial Mower 32" 36" 0 ~ z m ;c - en s:: )> z c )> r ~ ~ ~ en r -en -1 1 www. BradleyMowers.com ~ AHA~~ COMPANY! Bradley Mowers Belt Drive Parts 33 Frame Assembly 34 Frame Assembly

More information

2705 03-09 99 98 97 82 88 89 83 84 85 86 87 101 103 100 106 81 71 105 104 73 74 75 76 77 78 80 79 57 62 58 56 63 65 66 67 68 64 69 70 59 60 61 31 30 29 32 34 35 41 40 42 36 37 38 39 43 4445 46 33 55 54

More information

SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION

SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK

More information

Spare part list. piece rotor 220/240V SERVICE. piece brush holder 220V/240V assy 7. piece electronics 230V assy. piece protective sleeve DM10 9

Spare part list. piece rotor 220/240V SERVICE. piece brush holder 220V/240V assy 7. piece electronics 230V assy. piece protective sleeve DM10 9 cid_etlx V. 0. FEHRMAN For information only, will not be exchanged when altered! Date.05.003 09:39 Cnt-no 38 piece stator 0/0V SERV. 5 3 piece rotor 0/0V SERVICE 009 piece brush holder 0V/0V assy 7 3 piece

More information

Figure 1A. Solid Waste Can / Glass Shredder Assembly

Figure 1A. Solid Waste Can / Glass Shredder Assembly Figure A. Solid Waste Can / Glass Shredder Assembly Figure B. Solid Waste Mod Plastics Shredder Assembly Solid Waste Can / Glass Shredder & Solid Waste Mod. I Plastics Shredder Assemblies FIG. INDEX PART

More information

Onderdelen voor DH50MB

Onderdelen voor DH50MB OPTIONAL ACCESSORIES 0 STANDARD ACCESSORIES 0 1 313415 FRONT CAP 1 2 318608 GRIP 1 3 318590 STOPPER RING 1 4 313413 NEEDLE HOLDER 1 5 313419 RETAINER SPRING 1 6 318589 SPRING HOLDER 1 7 880810 NYLOCK HEX.

More information

3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes

3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit

More information

Parts Manual for: MODELS / I.D. : / ZTH5223A / ZTH5225A / ZTH6125A

Parts Manual for: MODELS / I.D. : / ZTH5223A / ZTH5225A / ZTH6125A Parts Manual for: MODELS / I.D. : 968999153 / ZTH5223A 968999154 / ZTH5225A 969999155 / ZTH6125A Husqvarna policy is to improve its products whenever it is possible and practical to do so. In an effort

More information

Electrical Parts. Replaces Page 42. Model W1737/W1738 (Mfd. Since 1/14) (W1737 Only) 2V2 3V3 3-1V2 (W V.

Electrical Parts. Replaces Page 42. Model W1737/W1738 (Mfd. Since 1/14) (W1737 Only) 2V2 3V3 3-1V2 (W V. Model W1737/W1738 (Mfd. Since 1/14) Replaces Page 42 Electrical Parts 7 6 8 17 15 15 35 16 10 20 26 18 23 12 38 (W1737 Only) 1 31 34 37 21 24 9 2V2 3V3 3-1V2 (W1738 440V Conversion Only) 39 25 14V2 12-1

More information

Model LS0815F Parts List A = Standard Equipment 〇 = Circuit Diagram

Model LS0815F Parts List A = Standard Equipment 〇 = Circuit Diagram LS0815F 4-14 1 3 4 6 32 7 47 48 42 44 41 43 11 10 16 14 15 8 9 24 20 19 22 17 21 18 13 23 27 26 29 33 31 35 34 36 86 87 89 90 93 105 104 107 108 109 110 111 101 100 63 83 84 69 67 65 72 79 80 81 85 77

More information

Meter, PD Series JB10-S6, S7

Meter, PD Series JB10-S6, S7 PARTS LIST MEASUREMENT SOLUTIONS Meter, PD Series JB10-S6, S7 Bulletin PO01020 Issue/Rev. 0.1 (7/14) We put you first. And keep you ahead. 2 Bulletin PO01020 Issue/Rev. 0.1 (7/14) Inner Mechanism Item

More information

Split Frame Clamshell Operation and Parts Manual

Split Frame Clamshell Operation and Parts Manual Split Frame Clamshell Operation and Parts Manual Corporate H&S Tool, Inc. Mail: P.O. box Wadsworth, OH Shipping: Weber Dr. Wadsworth, OH U.S.A. Tel: +-0--0 Fax: +-0-- www.hstool.com email: info@hstool.com

More information

MODELS: CC3730TE / CC3740TE

MODELS: CC3730TE / CC3740TE DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODELS: CC0TE / CC0TE February 00 Part #00 Table of Contents Pictorial Page Index....., Belt Guard Assembly... Controls Legend....... Belt Tensioner Assembly....

More information

DynaPower Generation II

DynaPower Generation II DynaPower Generation II Return to DYNAPOWER index Return to MAIN index GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING

More information

How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced)

How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) 1. Press and hold the set button (top left corner) until the display shows Fun

More information

Illustrated Parts: Model 853

Illustrated Parts: Model 853 Illustrated Parts: Model 853 BCS America LLC 5001 N Lagoon Ave Portland, OR 97217 Revised 09/20/2017 www.bcsamerica.com Phone: 800-543-1040 Fax: 800-777-7069 Bumper Accessories ------ - 823956 01.00 800.010-01.3

More information

COMMERCIAL MOWERS PARTS MANUAL FOR: MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251

COMMERCIAL MOWERS PARTS MANUAL FOR: MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251 PARTS MANUAL FOR: COMMERCIAL MOWERS MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251 FD KEES POWER EQUIPMENT, L.L.C. 700-800 PARK AVENUE BEATRICE, NEBRASKA, U.S.A. 68310 PRINTED IN USA MANUAL NO.-102935 REV.

More information

Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040

Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040 Operating Instructions and Parts Manual 10 x 16 Horizontal Band Saw Models J-7020, J-7040 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414472 Ph.: 800-274-6848 Revision C2 03/2014 www.jettools.com

More information

EEBR312A Brake Lathes Parts Identification

EEBR312A Brake Lathes Parts Identification EEBR312A Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference

More information

SRX-2000 PARTS LIST. SRX SRX E Revision 100. Manual Part# PM

SRX-2000 PARTS LIST.  SRX SRX E Revision 100. Manual Part# PM www.mkdiamond.com SRX-000 Early Entry Concrete Saw PARTS LIST MODELS p/n SRX-000 7 SRX-000 7-E Revision 00 0.008 Manual Part# 7-PM Caution: Read all safety and operating instructions before using this

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS FMS30 MIXER ML-134462 ML-134463 FORM 43181 Rev. A (April 2014) F-43181 Rev. A (April 2014) - 2-2014 Table of Contents 5 CONTROL PANEL 7 ELECTRICAL COMPONENTS 9 ATTACHMENT HUB

More information

Section E SWEEP WAGON

Section E SWEEP WAGON Section E SWEEP WAGON 1E 2E Index No. Part No. Description 1. 47-042058-002 Sweep Wagon Frame with Leaf Springs N.A. Sweep Wagon Frame without Leaf Springs 2. 47-041769-003 Sweep Board Only (brown for

More information

Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS

Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690060 Ph.: 800-274-6848 Revision G1 06/2015

More information

Model LS1018 Parts List A = Standard Equipment 〇 = Circuit Diagram

Model LS1018 Parts List A = Standard Equipment 〇 = Circuit Diagram LS1018 7-14 103 104 105 106 97 99 100 110 109 63 85 96 200 107 90 2 199 108 37 89 91 92 93 94 31 74 75 73 140 70 121 15 254 255 113 215 236 116 114 115 196 258 195 118 197 119 259 117 203 253 67 95 112

More information