August 2008 Greetings to Go Cruisin

Transcription

1 August 2008 Greetings to Go Cruisin Materials: Cruisin Greetings to Go Cruisin Unmounted Font and Borders & Backgrounds Cruisin Wood Mounted Stamp Set Cruisin Wood Mounted Happy Birthday Stamp Tools: Bone Folder Trimmer Scissors Adhesive Glue Stick or Glue Pen Tape Black, Light Coral and Dark Coral Ink Foam Tape ¼ Hole Punch and Eyelet Setter Black Pen Corner Rounder Fold all cards along score lines and reinforce creases with a bone folder. Before making crease, check to make sure that all edges are aligned. The edges of most cards, panels and die cuts have been colored with black ink. This step is optional, and the directions to ink edges are not included below. For a softer look, ink with a sponge or stylus tool with blender tip. For a bolder effect, ink directly from the pad onto the card. If you do not have the item needed to complete the card as it is shown, simply eliminate the step, or modify it to use the items that you have in your stash.

2 August 2008 Cruisin Page 2 of 8 Set A: 3-3/8 x 4-7/8 Charcoal Cards with 3-1/8 x 4-5/8 Light Coral Panels Card #1 Mint Die Cut: Thanks Light Coral Die Cut: Thank You WM Tread Stamp Dark Coral and (2) Black Eyelets Coral Satin Ribbon 1. Stamp the WM image three times across the panel with dark coral ink, rotating each time. 2. Set eyelets on each side of the tag and thread with satin ribbon. Attach the ribbon to the panel and tape ends on the back. Attach the Light Coral die cut to the bottom right corner of the panel with foam tape. Layer the panel onto the card. Card #2 Light Coral Die Cut: Happy Birthday Mint Die Cut: Hi, Friend! UM Borders & Backgrounds 1. Stamp UM images onto the lower left corner of the panel with black ink. 2. Layer the Light Coral and Mint die cuts in the upper right corner of the panel; attach the panel to the card.

3 August 2008 Cruisin Page 3 of 8 Card #3 Card #4 Mint Die Cut: Just Remember UM Borders and Backgrounds WM Tread Stamp Light Coral and Coral Satin Ribbon 1. Stamp the UM image onto the lower left corner with black ink. Stamp the WM tread image around the black speedometer with light coral ink. 2. Attach the satin ribbon across the top of the panel and layer the Mint die cut on top with foam tape. Mount the panel onto the card. WM Record Stamp Light Coral Die Cuts: Rock On and You Rock 1. Stamp the WM Record image onto the right edge of the Light Coral panel with black ink. 2. Attach the Rock On die cut with foam adhesive. Tuck the You Rock die cut just beneath the larger die cut. 3. Layer the panel onto the card. Card #5 Light Coral Die Cut: Wishing You WM Tread Stamp UM Font (3) Black Eyelets Black Grosgrain Ribbon Light Coral and Dark Coral Ink 1. Stamp the tiny UM Font onto the entire panel with light coral ink. Stamp the WM Tread image with dark coral ink, rotating each time. 2. Thread the black grosgrain ribbon through the die cut and attach to the panel with tape. 3. Set three black eyelets evenly beneath the tag; attach the panel to the card.

4 August 2008 Cruisin Page 4 of 8 Set B: 5-1/4 x 7-7/8 Light Coral Cards with 4-3/4 x 7-3/8 Charcoal Panels and 4-1/4 x 6-7/8 Dark Coral Panels Card #1 Light Coral Card with Charcoal and Dark Coral Panels 3-5/8x9 Mint Panel (From Set C) WM Record Stamp Mint Die Cut: For the Record Black Eyelet Clock Hand 1. Stamp the WM record image onto the vertical edge of the Mint panel. For perfect placement, align the left edge of the stamp with the left edge of the paper. Trim the strip of records from the panel. 2. Punch a hole in the center of one of the records, and attach the clock hand with an eyelet. 3. Attach the Dark Coral panel to the Charcoal panel, and layer the stamped Mint strip along the left edge. Trim the ends of the Mint strip to match the length of the Charcoal panel. 4. Attach the Mint die cut in the upper right corner and mount the nested panels onto the card. Card #2 Light Coral Card with Charcoal and Dark Coral Panels WM Happy Birthday Stamp UM Font Black Pen 1. Stamp the WM HB stamp several times across the bottom edge of the Dark Coral panel with black ink. 2. Stamp High Octane with the UM Font and black ink. 3. Handwrite have a and birthday onto the card. 4. Nest the panels together onto the card.

5 August 2008 Cruisin Page 5 of 8 Card #3 Light Coral Card with Charcoal and Dark Coral Panels Light Coral Die Cuts: Happy Anniversary and Best Wishes Mint Panel (Remaining from Set B, Card #1) White Eyelet 1. Trim the Mint panel to 2.25x2.25. Layer the Light Coral Happy Anniversary corners onto the Mint square. Punch a hole into the center of the square and set a white eyelet into the hole. Layer onto the upper left corner of the Dark Coral panel. 2. Attach the circular Best Wishes die cut to the upper left corner of the Charcoal panel. Slide the top left corner of the Dark Coral panel beneath the circular die cut and position as shown. Use adhesive to attach the die cut to the panel and trim the overlapping die cut edges to fit. 3. Layer the nested panels onto the card. Card #4 Light Coral Card with Charcoal and Dark Coral Panels 3-5/8x9 Mint Panel (From Set C) Light Coral Die Cuts: Thank You and Happy Days Mint Die Cut: I m the Lucky One Black Grosgrain Ribbon 1. Trim the Mint panel vertically to create two ¼ x 9 strips. 2. Attach the black ribbon to the upper half of the Dark Coral panel and layer a Mint strip above and below the ribbon, wrapping ends around to the back. 3. Adhere the Light Coral die cuts to the Dark Coral panel as shown; nest the panels onto the card at angles. 4. Layer the Mint die cut in the lower right corner.

6 August 2008 Cruisin Page 6 of 8 Card #5 Light Coral Card with Charcoal and Dark Coral Panels Mint Die Cuts: A Successful Marriage and Happy Anniversary UM Borders & Backgrounds Corner Rounder 1. Trim the Dark Coral panel horizontally at 2.5. Round the corners of the panel and the Mint die cut and nest; layer onto the upper half of the Charcoal panel. 2. Stamp the UM car image onto the upper left corner of the remaining portion of the Dark Coral panel. Attach the Mint die cut beneath the stamped image. Round the corners and attach to the lower half of the Charcoal panel. 3. Round the corners of the Charcoal panel and layer onto the card. Set C: 3-7/8 x 9-1/4 Dark Coral Cards with 3-5/8 x 9 Mint Panels Card #1 Dark Coral Card and Mint Panel Mint Die Cuts: (4) Circular Quotes (4) Silver Eyelets Coral Satin Ribbon 1. Punch a hole and set a ¼ silver eyelet into each circular die cut. 2. Trim a ½ strip from the Mint panel, tie with a small length of coral ribbon, and attach to the bottom half of the card. Place the four Mint die cuts along the top edge of the strip.

7 August 2008 Cruisin Page 7 of 8 Card #2 Dark Coral Card with Mint Panel Light Coral Die Cut: Good Luck Black Grosgrain Ribbon UM Borders & Backgrounds Dark Coral Ink 1. Stamp the UM car image in a straight row along the left edge of the vertical Mint panel with black ink. Sponge coral ink onto the back fender of each stamped card. 2. Stretch a length of black ribbon along the edge of the stamped images; tape ribbon ends to the back of the panel. 3. Layer the die cut onto the bottom of the panel; attach the panel to the card. Card #3 Dark Coral Card Mint Panel (from Set C, Card #1) Mint Die Cut: Feel Better Soon Light Coral Die Cuts: Hello Friend and Get Well Soon WM Tread Stamp Coral Satin Ribbon 1. Place a mask along the top edge of the horizontal Mint panel. Stamp the WM Tread image onto the revealed space with black ink. Sponge ink along the edge of the mask to create a warm edge. Layer the panel onto the card. 2. Attach ribbon to the top of the Mint die cut and adhere to the lower right corner of the card. Place Hello Friend just above the die cut with foam adhesive. Attach the Get Well Soon die cut in the upper left corner.

8 August 2008 Cruisin Page 8 of 8 Card #4 Dark Coral Card with Mint Panel Light Coral Die Cuts: Thanks, Thanks, Thanks, Thank, You, and Assorted Circles Mint Die Cut: Thank You! 1. Attach the circular die cuts to the Mint panel as shown with a glue stick or glue pen. Trim the edges of the die cuts that hang beyond the edge of the panel. 2. Layer the Mint Thank you and the Light Coral Thank die cuts onto the panel with foam adhesive. Tuck the You die cut beneath the Thank die cut. 3. Attach the panel to the card. Card #5 Dark Coral Card 3-1/8 x 9 Mint Panel (Set B, Card #4) Light Coral Die Cuts: Have Fun UM Borders & Backgrounds 1. Trim the Mint panel vertically at Fold and attach the Light Coral die cuts to the upper right edge of the Mint panel. Stamp the UM quote onto the bottom left corner of the panel with black ink. 2. Attach the Mint panel to the card and stamp the UM image into the upper left corner with black ink.