August 2012 Greetings to Go Bold Blooms

Transcription

1 August 2012 Greetings to Go Bold Blooms Materials: Bold Blooms Greetings to Go Bold Blooms Unmounted (UM) Borders & Backgrounds Bold Blooms Unmounted Greetings Bold Blooms Unmounted Art Nouveau Bold Blooms Club Scrap Unmounted Stamps Bold Blooms Beads Tools and Supplies: 12 Paper Trimmer CS Grid Ruler CS India Black, White Pigment, Leaf, Sandstone and Fuchsia Inks White Pigment Pen (Bold Blooms CS Goodie) Adirondack Terra Cotta Ink Adhesive Foam Adhesive Tape Scissors Cutting Mat and Craft Knife Distressing Tool Paper Piercing Tool and Cork Board Stapler and Staples Faber-Castell Gelatos Faber-Castell Big Brush PITT Markers Water Misting Bottle Water Brush (4) Black Photo Mounting Corners 2 Circle Punch (2) White Flower Eyelets Crop-A-Dile Beading Thread and Needle Notes: Use a paper trimmer or cutting mat, ruler and craft knife to separate the White cutaparts as indicated by the artwork. If you do not have an item required to complete a card, simply omit the step or substitute the item.

2 August 2012 Bold Blooms Greetings to Go Page 2 of 6 Set A: 5x7 Tangerine Cards with 4¼x6¼ White and 4x6 Pink Panels Card #1 (4) Black Photo Mounting Corners 1. Mist the UM bloom with water and color with red and green gelatos. Stamp onto the Pink panel and add the black dots with a water brush. 2. Stamp the UM greeting onto the panel with India Black ink and nest onto the White panel with black photo mounting corners. 3. Center the panels onto the card. Card #2 White Cutapart: Thanks Unmounted Art Nouveau Orange Flower Brad 1. Stamp the UM poppy border onto the Pink panel with Fuchsia ink. Stamp the greeting onto the upper right side of the panel with India Black ink. 2. Tie ribbon around the cutapart and layer onto the panel with foam adhesive. 3. Attach the brad to the panel. Nest onto the White panel and card. Card #3 White Cutapart: We Are So Sorry for Your Loss (2) White Flower-Shaped Eyelets 1. Punch two holes above the greeting on the cutapart, set eyelets and tie with ribbon. 2. Stamp the UM flower border onto the Tangerine card with Terra Cotta ink. 3. Nest the cutapart onto the panels and card.

3 August 2012 Bold Blooms Greetings to Go Page 3 of 6 Card #4 White Cutapart: I Love You... Tangerine Flower Brad Thread and Beads 1. Stamp the Tangerine card and Fuchsia panel with the UM border images and Terra Cotta ink. 2. Consult the Bold Blooms Scrap Rap for instructions to make the beaded daisy. Attach to the cutapart. 3. Add the brad to the lower right corner of the cutapart. Nest onto the panels and card at different angles. Card #5 White Cutapart: Get Well Soon 1. Use a craft knife, cutting mat and ruler to remove the quotes from the cutapart. Make each trimmed greeting slightly smaller. 2. Mark the location of the windows of the cutapart on the Pink panel. Use a scissors to remove the marked areas of the Pink panel. This will allow the contrast of the White panel to complement the quotes. 3. Nest the cutapart and panels onto the card. Attach the greetings to the windows with foam adhesive. Set B: 4¼x5½ Pink Cards with 3¾x5 Lime Panels Card #1 White Cutaparts: Thank You and Flower Frame Art Nouveau Unmounted Stamps Lime Flower Brad 1. Stamp the UM bloom image onto the Lime panel with Leaf ink. 2. Attach the brad and ribbon to the upper left corner of the flower cutapart. Nest the cutapart onto the panel and card. 3. Layer the Thank You cutapart onto the card with foam adhesive.

4 August 2012 Bold Blooms Greetings to Go Page 4 of 6 Card #2 White Cutapart: A Little Note 1. Stamp the UM poppy image onto the Lime panel with Fuchsia and Leaf inks. 2. Distress the edges of the cutapart with the distressing tool. Add two staples to the upper left and lower right corners. 3. Make a loop with the tangerine ribbon and secure to the back of the cutapart with tape. 4. Attach the cutapart to the panel with foam adhesive, and nest the panel onto the card. Card #3 White Cutapart: You're the Bee's Knees Unmounted Art Nouveau Lime Flower Brad 1. Stamp the UM lines image onto the Lime panel with Leaf ink. 2. Add the brad to the cutapart and center onto the panel. 3. Tie the ribbon around the panel and attach to the card. Card #4 White Cutapart: Happy Anniversary Unmounted Greeting Unmounted Borders & Backgrounds Lime Flower Brad 1. Stamp the UM quote onto the Lime panel with India Black ink. Ink the UM flower image with colored markers and stamp next to the quote. 2. Draw two lines 1/8 apart around the perimeter of the panel with the white pen. 3. Wrap pink ribbon around the bottom of the panel and add the flower brad. Attach the cutapart with foam adhesive and nest the panel onto the card.

5 August 2012 Bold Blooms Greetings to Go Page 5 of 6 Card #5 Unmounted Borders & Backgrounds 1. Stamp the UM text onto the panel with Leaf, Fuchsia, and India Black inks. Ink the poppy images with markers and stamp onto the panel. 2. Fill in the A and Purpose with markers. Add a dot to each poppy with the black gelato and a water brush. 3. Nest the panel onto the card. Set C: 4½x6¼ Red Cards with 4¼x6 Black and 4x5¾ Tangerine Panels Card #1 White Cutapart: Marriage is a Relationship... UM Greeting UM Borders & Backgrounds Tangerine Flower Brad 1. Trim the Black panel vertically at Cut the Tangerine panel vertically at 3.75 and Stamp the greeting onto the bottom of the 3.75x5.75 Tangerine panel and attach a pink bow. Layer the white cutapart onto the panel and add the brad to the upper left corner. Nest the Tangerine and Black panels onto the left card flap. 4. Stamp the UM flower border onto the 2.5x5.75 Tangerine panel with Terra Cotta ink. Nest onto the Black panel and layer onto the right flap of the card. Card #2 White Cutapart: Happy Birthday, Dear Friend Tangerine, Pink and Lime Flower Brads 1. Attach the brads to the cutapart and nest onto the Tangerine panel. Adhere the panel to the left card flap. 2. Nest the Black panel onto the right card flap.

6 August 2012 Bold Blooms Greetings to Go Page 6 of 6 Card #3 UM Borders and Backgrounds 1. Stamp the UM greeting and border onto the Tangerine panel with India Black ink. 2. Mist the UM flower image with water, color with gelatos and stamp onto the panel. Stamp the UM texture image onto the entire panel with Sandstone ink. Finish with a bow. 3. Nest the Tangerine panel onto the Black panel and attach to the left flap of the card. Card #4 UM Art Nouveau Pink Flower Brad 1. Stamp the UM poppy border onto the right edge of the Tangerine panel with Terra Cotta ink. 2. Punch a circle into the top center of the panel with the 2 punch. Temporarily center onto the Black panel and mark the location of the circle. 3. Stamp the UM greeting onto the Black panel within the marked area with White Pigment ink. 4. Tie the pink ribbon around the Tangerine panel and nest onto the Black panel. Attach the pink brad and adhere to the left card flap. Card #5 White Cutapart: Happy Belated Birthday UM Greeting 1. Stamp the greeting onto the Tangerine panel with India Black ink. Stamp the flower image with Fuchsia and Leaf ink. 2. Tie ribbon around the cutapart and layer onto the panel with foam adhesive. 3. Nest the Tangerine and Black panels onto the top flap of the card.