KDN GENERAL DATA STANDARDISED CENTRIFUGAL PUMPS BARE SHAFT ON BEDPLATE WITH MOTOR AND COUPLING. Applications. Constructional features of the pump
|
|
- Patricia Henderson
- 6 years ago
- Views:
Transcription
1 KDN STANDARDISED CENTRIFUGAL UMS BARE SAFT ON BEDLATE WIT MOTOR AND COULING GENERAL DATA Applications Enbloc, centrifugal otor-driven pups with coupling designed for a wide range of applications such as: supplying water the circulation of hot water for central heating the circulation of cold water for air conditioning and refrigerating the transfer of liquids in agriculture, horticulture and in industries the ipleentation of puping systes These pups can be coupled with elastic coupling (standard or spacer) to a or poles electric otor and ounted on a pressed sheet base coplying with UNI EN. Constructional features of the pup Single-stage, cast iron spiral body ade to DIN-EN (forerly DIN ), seal holder cover and support in cast iron, flanges ade to DIN and DIN for DN. Ipeller in cast iron, encased and dynaically balanced with copensation of the axial thrust by eans of balancing holes, operating (on request) with interchangeable wear rings. Stainless steel pup sha supported by two large aintenance-free greased ball bearings, greased for life and housed inside a special chaber of the support. Standard seal: standardised echanical seal ade to DIN in carbon/carborundu with O rings in EDM. acking with lubricating idraulic ring and stuffing box in two easily reovable parts, available on request.
2 TECNICAL DATA STANDARD VERSION WIT MECANICAL SEAL VERSION ON REQUEST WIT ACKING STANDARD VERSION WIT MECANICAL SEAL N. A ARTS UM BODY IMELLER UM SAFT GASKET OR SEAL OLDER DISK MECANICAL SEAL SACER SEAL MATERIALS CAST IRON UNI ISO CAST IRON UNI ISO STAINLESS STEEL AISI - UNI / VITON CAST IRON UNI ISO CARBON/CARBORUNDUM STAINLESS STEEL AISI - UNI / VERSION ON REQUEST WIT ACKING N. ARTS BUS FOR SEAL YDRAULIC RING ACKING MATERIALS STAINLESS STEEL AISI - UNI / STAINLESS STEEL AISI - UNI / TFE IMREGNATED RAMIE - Rotation speed: - /in. - Operating range: fro to /h with a head of up to. - uped liquid: without solid or abrasive substances, not viscous, not aggressive, not crystallised and cheically neutral, close to water characteristics. - Liquid teperature range: fro - C to + C. - Maxiu abient teperature: + C. - Maxiu working pressure: bar - ka (for DN ax bar). - Flanging: N DIN N DIN per DN - Installation: norally horizontal. - Special version on request: pups for liquids other than water. acking (that can also be fed externally). Other voltages and/or frequencies.
3 Description of the product In the description of the bare sha pup no ention is ade of the coupling or otor data. In the description of the pups ounted on a base without a otor, the otor s data are not entioned. The exaple given describes an NK - type pup with a cast iron Ø ipeller, with BAQE type echanics, standard coupling and -poles. otor running on - V z. Exaple KDN - / A W / BAQE / /, / Type Noinal diaeter of discharge port (DN) Noinal diaeter of the ipeller Actual diaeter of the ipeller Material codes: A (): Cast iron B (): Cast iron with bronze ipeller Wear rings (only when existing) Seal code Type of pup/otor coupling = Without coupling (bare sha pup) = With elastic standard coupling = With elastic spacer coupling Motor power in Voltage and nuber of otor poles up aterial codes Coponent up body Seal holder disk Stuffing box Ipeller Consuable rings* up sha Sha sleeve** acking codes Ite Ite Ite S N K E F O A () cast iron GG GG OT Cu Si GG Version B () cast iron with bronze ipeller GG GG OT Cu Si GCuSnZnb UNI /a- GG GG AISI UNI / AISI UNI / Description of the packing Stuffing box type Cooling Stuffing box not cooled Stuffing box cooled Sealing liquid With internal liquid With external liquid Without hydraulic ring Description of the echanical seal Ite Ite & Ite Ite A B C D M X A B C S U Q V X S T E V M v Description of the seal O ring with fixed guide Rubber bellows seal O ring with spring guide Balanced O ring Metal bellows seal Other seal types Materials Ipregnated carbon/etal Ipregnated carbon/resin Other carbon types Chroiu steel Tungsten carbide Carborundu Aluiniu oxide (ceraic) Other ceraic types Materials Nitrile rubber (NBR) Silicone rubber Teflon (TFE) EDM Viton TFE coated O ring Materials Reinforced * on request ** only for packing or balanced echanical seal
4 Description of the product code Ipellerʼs noinal diaeter up/ipeller aterials noinal A () = cast iron/cast iron B () = cast iron/bronze A () + Wr* Bare sha,,,,... K L M B () + Wr* * With consuable rings,,, up type KDN KDN KDN KDN KDN KDN KDN KDN A B C G * On request Seal available BAQE BAQE-RMG BQQV* BAQV* SNE* SNO* SNF* BQQE* A B C D E F G K L M N,, Identification DAB UMS S.p.A. D Coupling DAB UMS S.p.A. Without coupling* With elastic standard coupling With elastic spacer coupling * Bare sha pup Voltage Without otor x- / -V z x- / -V z x- z x-v z x- / -V z x- / -V z x- z x-v z x-v z (with inverter) x-v z (with inverter) oles roduct code D Bare sha pup up on base without otor Coplete otor-driven pup with base
5 GENERAL DATA Asynchronous, closed and cooled with external ventilation, or poles. Rotor ounted on extra large ball bearings to guarantee low noise running and durability. Electrical protection: in copliance with the EEC / ELECTROMAGNETIC COMATIBILITY directive and subsequent aendents, EEC / LOW VOLTAGE directive and subsequent aendents and CEI - standards. Construction: rotection level: I Insulation class: F Supply voltage: Three-phase -V z up to, inclusive V z over, Kw Special versions on request: other voltages and/or frequencies. Instruction to find the pup and otor required. Find on the chart supplied the faily of pups that offer, ore or less, the rates of flow and heads required. STANDARDIZED MOTOR-DRIVEN UMS ON BASELATE. Look for the ost suitable characteristic on the characteristic curves of each faily.. Find the power wanted on the power graph for the pup to work where it is wanted.. There are likely to be variations in the rate of flow of the liquid puped causing an oscillation of the functioning point, in which case the power absorbed could be greater. When choosing the otor, allow the following safety argins: If necessary, adjust the power of the otor to be installed if you expect to be puping liquids with quite high viscosity and specific weight values (verify suitability of construction aterials in contact with the liquid).. With the nae of the pup and the power of the otor, find on the following technical data the nae of the ost suitable base (with otor, spacer coupling and coupling cover).. The pup and base required will be delivered already assebled and aligned, although an alignent check is always required aer installation (see INSTRUCTION MANUAL).
6 Diensions of bare sha pups MODEL KDN -. KDN - KDN -. KDN - KDN -. KDN - KDN - KDN - KDN - KDN - KDN - KDN - KDN - KDN - KDN - KDN - KDN - KDN - KDN - KDN - KDN - KDN - KDN - KDN - KDN - KDN - KDN - KDN - ax in - ax in - Q /h ,.. Q /h,... Flange diensions up diensions Support diensions oles for bolts Sha end X DNA DNM A F B M M N N W S S D L M M M M M M M M M M M M M M M M M M The sizes -., -., -. e - are suppleentary sizes and not included in DIN-EN (ex DIN ) standard. WEIGT Kg D D D S Noinal diaeter (DN) DIN N DIN N D D D S n holes
7 Diensions and electrical data of a coplete otor-driven pup MODEL KDN -. KDN - KDN -. KDN - poles ower () poles MOTOR SIZE MEC MEC MEC MEC MEC S MEC L MEC L MEC M MEC MEC MEC MEC MEC S MEC L MEC L MEC M MEC MEC MEC MEC MEC S MEC L MEC L MEC M MEC S MEC MEC MEC MEC S MEC L MEC L MEC M MEC S MEC S Supply voltage z /V /V /V /V /V /V V V /V /V /V /V /V /V V V /V /V /V /V /V /V V V V /V /V /V /V /V V V V V I no (A),-,,-,,-, -,,-,,-,,,,-,,-,,-, -,,-,,-,,,,-,,-,,-, -,,-,,-,,,,,-,,-,,-,,-,,-,,,,, Flange diens. () DNA Unit diensions () DNM A A L L B B D L Standard coupling Weight Kg Spacer coupling L Weight Kg, Ref.
8 Diensions and electrical data of a coplete otor-driven pup MODEL KDN -. KDN - KDN - KDN - KDN - poles ower () poles MOTOR SIZE MEC MEC MEC MEC S MEC L MEC L MEC M MEC S MEC S MEC MEC MEC MEC S MEC L MEC L MEC L MEC M MEC S MEC S MEC M MEC M MEC MEC MEC MEC S MEC S MEC L MEC L MEC M MEC S MEC S MEC MEC MEC MEC S MEC L MEC L MEC M MEC S MEC S MEC M MEC M MEC MEC MEC S MEC L MEC L MEC L MEC M MEC S MEC S MEC M MEC M MEC L Supply voltage z /V /V /V /V /V V V V V /V /V /V /V /V /V V V V V V V /V /V /V /V /V /V V V V V /V /V /V /V /V V V V V V V /V /V / /V /V V V V V V V V I no (A),-,,-,,-,,-,,-,,,,,,-,,-,,-,,-, -,,-,,,,,,,,-,,-,,-,,-,,-,,-,,,,,,-,,-,,-,,-, -,,,,,,,,-,,-,,-, -,,-,,,,,,, Flange diens. () DNA Unit diensions () DNM A A L L B B D L Standard coupling Weight Kg Spacer coupling L Weight Kg REF.
9 MODEL poles ower () poles MOTOR SIZE Supply voltage z I no (A) Flange diens. () DNA DNM A A Unit diensions () L L B B D Standard coupling L Weight Kg Spacer coupling L Weight Kg REF. KDN - KDN - KDN - KDN - KDN , MEC L MEC L MEC L MEC M MEC M MEC M MEC L MEC M MEC L MEC MEC MEC MEC S MEC L MEC L MEC M MEC S MEC S MEC M MEC MEC MEC S MEC L MEC L MEC L MEC M MEC S MEC S MEC M MEC M MEC L MEC MEC S MEC L MEC L MEC L MEC M MEC S MEC M MEC M MEC L MEC M MEC L MEC L MEC L MEC M MEC S MEC M MEC L MEC M MEC L MEC L MEC M /V /V V V V V V V V /V /V /V /V /V V V V V V /V /V /V /V /V V V V V V V V /V /V /V /V V V V V V V V V /V V V V V V V V V V -,,-,,,,,,,-,,-,,-,,-, -,,,,,,,-,,-,,-, -,,-,,,,,,,,-,,-, -,,-,,,,,,,,-,,,,,,,
10 Diensions and electrical data of a coplete otor-driven pup MODEL KDN - KDN - KDN - KDN - KDN - poles ,,.,.. ower () poles MOTOR SIZE MEC MEC MEC MEC S MEC L MEC L MEC M MEC S MEC S MEC M MEC M MEC MEC S MEC L MEC L MEC L MEC S MEC S MEC M MEC M MEC L MEC M MEC S MEC L MEC L MEC L MEC M MEC S MEC M MEC M MEC L MEC M MEC L MEC L MEC L MEC M MEC S MEC M MEC M MEC M MEC L MEC L MEC M MEC M MEC S MEC M MEC M MEC L MEC M MEC M MEC M MEC S MEC M MEC S Supply voltage z /V /V /V /V /V /V V Δ V Δ V Δ V Δ V Δ /V /V /V /V V Δ V Δ V Δ V Δ V Δ V Δ V Δ /V /V /V V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ I no (A),-,,-,,-,,-, -,,-,,,,,,,-,,-, -,,-,,,,,,,-, -,,-,,,,,,,,,,,,,,,,,,,, Flange diens. () DNA Unit diensions () DNM A A L L B B D L Standard coupling Weight Kg Spacer coupling Weight Kg L REF.
11 Diensions and electrical data of a coplete otor-driven pup MODEL KDN - KDN - KDN - KDN - poles...,..,..... ower () poles... MOTOR SIZE MEC S MEC L MEC L MEC L MEC M MEC S MEC S MEC M MEC M MEC L MEC M MEC L MEC L MEC L MEC L MEC L MEC M MEC S MEC M MEC M MEC L MEC M MEC L MEC L MEC M MEC M MEC S MEC M MEC S MEC M MEC M MEC L MEC L MEC M MEC M MEC S MEC M MEC M MEC M MEC L MEC M MEC L MEC L MEC M MEC S MEC M MEC S Supply voltage z /V /V /V V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ /V /V V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ V Δ I no (A),-, -,,-,,,,,,,,, -,,-,,,,,,,,,,,,,,,,,,, Flange diens. () DNA Unit diensions () DNM A A L L B B D L Standard coupling Weight Kg Spacer coupling Weight Kg L REF.
12 Diensions and electrical data of a coplete otor-driven pup MODEL KDN - KDN - KDN - KDN - KDN - poles, ower () poles MOTOR SIZE MEC L MEC M MEC S MEC M MEC M MEC L MEC L MEC L MEC M MEC M MEC S MEC M MEC S MEC M MEC M MEC L MEC M MEC M MEC M MEC S MEC M MEC S MEC M MEC L MEC M MEC L MEC L MEC S MEC M MEC M MEC L MEC M MEC L MEC L MEC S MEC M MEC M MEC L MEC M Supply voltage z V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V I no (A),,,,,,,,,,,,,,,,,,,, Flange diens. () DNA Unit diensions () DNM A A L L B B D L Standard coupling Weight Kg Spacer coupling L Weight Kg REF.
13 ERFORMANCE RANGE GRAICAL SELECTION TABLE The perforance curves are based on the kineatic viscosity values = /s and density equal to kg/. Curve tolerance according to ISO. = /in DAB UMS reserve the right to ake odifications without prior notice
14 ERFORMANCE RANGE KDN OLES MODEL Q /h l/in NUMERICAL SELECTION TABLE = /in KDN -./ KDN -./ KDN -./ KDN -./ KDN -./ KDN -./ KDN -./ KDN -./ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -./ KDN -./ KDN -./ KDN -./ KDN -./ KDN -./ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -./ KDN -./ KDN -./ KDN -./ KDN -./ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ ()
15 ERFORMANCE RANGE KDN OLES MODEL Q /h l/in NUMERICAL SELECTION TABLE = /in KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -// KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ ()
16
17 ERFORMANCE RANGE KDN OLES MODEL Q /h l/in NUMERICAL SELECTION TABLE = /in KDN -// KDN -// KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -/ KDN -// KDN -// KDN -// KDN -/ KDN -/ ()
18
19 KDN -. = /in KDN - = /in ka Q US gp Q IM gp % % % % %,%,%,%,%,%,%,% % % % ka Q US gp Q IM gp %,%%,% %,%,%,%,%,%,% %,% %,% Q /h NS NS,,, Q /h,,,,, Q /h Q l/s Q l/in Q /h NS NS,, Q /h,,,,,,, Q /h Q l/s Q l/in KDN -. = /in KDN - = /in Q US gp Q IM gp ka % % %,%,% % % % %,% %,% Q US gp Q IM gp ka % % % % %,% %,%,%,% % %,% % % % Q /h NS NS,,, Q /h,, Q /h Q l/s Q l/in,,, Q /h NS NS Q /h,,,,,,, Q /h Q l/s Q l/in
20 KDN -. = /in KDN - = /in ka Q US gp Q IM gp % %,% % % % % % % % % ka Q US gp Q IM gp % % %,%,% %,% %,% %,% %,% % % Q /h NS NS,, Q /h,,,,,,,, Q /h Q l/s Q l/in,,, Q /h NS NS,, Q /h,,,,, Q /h Q l/s Q l/in,, KDN - = /in KDN - = /in ka Q US gp Q IM gp % %,% % %,%,% % % % %,% % ka Q US gp Q IM gp %,% %,% %,%,% %,% % %,% % %,% Q /h NS NS,,,, Q /h,,,,,,,,, Q /h Q l/s Q l/in, Q /h NS NS,,, Q /h,,,, Q /h Q l/s Q l/in,,,
21 KDN - = /in KDN - = /in ka Q US gp Q IM gp %,%,% % %,%,%,%,%,%,%,%,% % ka Q US gp Q IM gp % %,%%,% %,%,%,%,%,%,% % Q /h NS NS Q /h,,,, Q /h Q l/s Q l/in,, Q /h NS NS,, Q /h,,, Q /h Q l/s Q l/in KDN - = /in KDN - = /in Q US gp,%,% ka Q IM gp % % %,% %,% % %,% Q /h NS NS,, Q /h,,,, Q /h Q l/s Q l/in,,,,
22 KDN - = /in KDN - = /in ka Q /h,, Q US gp Q IM gp % % %,% %,%,% Q /h NS NS,,,% Q /h Q l/s Q l/in % % % % %,%,,, ka NS Q /h,, Q /h Q US gp Q IM gp % %,% %,%,%,%,%,%,%,% %,% Q /h Q l/s Q l/in % % NS KDN - = /in KDN - = /in ka Q US gp Q IM gp ka Q US gp Q IM gp / % %,% %,% % % % % % % % % %,% %,% % %,% %,%,%,%,%,%,%,%,% %,% % Q /h NS NS,, Q /h,,,, / Q /h Q l/s Q l/in,,, Q /h NS NS,, Q /h,,,,, Q /h Q l/s Q l/in,,
23 KDN - = /in KDN - = /in ka Q US gp Q IM gp % % % %,% %,%,%,%,%,%,%,%,% % % ka Q US gp Q IM gp,% % % %,% %,%,%,%,%,% %,% % Q /h NS NS,, Q /h Q /h Q l/s Q l/in NS Q /h,, Q /h Q /h Q l/s Q l/in NS KDN - = /in KDN - = /in ka Q US gp Q IM gp % %,% %,%,%,%,% %,%,% %,% Q /h NS NS Q /h Q /h Q l/s Q l/in
24 KDN - = /in KDN - = /in ka Q US gp Q IM gp %,% %,% %,%,%,% % %,%,%,%,% % %,% ka Q US gp Q IM gp % % % % %,%,% %,%,%,% % % % % Q /h NS NS,, Q /h Q /h Q l/s Q l/in, NS Q /h Q /h Q /h Q l/s Q l/in NS KDN - = /in KDN - = /in ka Q US gp Q IM gp % %,% %,%,% %,% %,%,% %,% ka Q US gp Q IM gp % % % %,%,% %,%,%,%,% % %,% % Q /h NS NS Q /h Q /h Q l/s Q l/in Q /h NS NS Q /h Q /h Q l/s Q l/in
25 KDN - = /in KDN - = /in ka Q US gp Q IM gp % % %,% %,% %,% %,% %,% %,% Q /h NS NS Q /h Q /h Q l/s Q l/in KDN - = /in KDN - = /in ka Q US gp Q IM gp Q /h NS NS Q /h % % %,% % %,%,%,%,%,% Q /h Q l/s Q l/in %,% % % ka Q /h NS NS Q /h Q US gp Q IM gp / / / % % % % % % Q /h Q l/s Q l/in %,%,% % % % % % % / / /
26 STANDARD MOTORS ELECTRICAL DATA OLES ( r.p..) MOTOR TYE ower Speed r.p.. Efficiency % ower factor Cos. ϕ Supply voltage z V Noinal current Starting current Ia/In Starting torque Ma/Mn Maxiu torque M/k/Mn MEC,, x-,-,,,, MEC,, x-,-,,,, MEC,, x-,-,,,, MEC S,, x-,-,,,, MEC L,, x-,-,,,, MEC L,, x-,-,,,, MEC L, x,,,, MEC M, x,,,, MEC S,, x,,,, MEC M,, x,,,, MEC M, x,,,, MEC L, x,,, MEC M,, x,,, MEC L, x,,, MEC L, x,,,, OLES ( r.p..) MOTOR TYE ower Speed r.p.. Efficiency % ower factor Cos. ϕ Supply voltage z V Noinal current Starting current Ia/In Starting torque Ma/Mn Maxiu torque M/k/Mn MEC,, x-,-,,,, MEC,,, x-,-,,,, MEC S,,, x-,-,,, MEC L,, x-,-,,,, MEC L,, x,,, MEC M,, x,,,, MEC S,,, x,,,, MEC S,, x,,,, MEC M,, x,,,, MEC M,, x,,,, MEC L,, x,,,, MEC M,, x,,,, MEC L,, x,,,, MEC L, x,,,, MEC M,, x,,,, MEC M, x,,,, MEC S,, x,,, MEC M,, x,,, MEC S, x,,,
KDN GENERAL DATA STANDARDISED CENTRIFUGAL PUMPS BARE SHAFT ON BEDPLATE WITH MOTOR AND COUPLING. Applications. Constructional features of the pump
KDN STANDARDISED CENTRIFUGAL UMS BARE SAFT ON BEDLATE WIT MOTOR AND COULING GENERAL DATA Applications Enbloc, centrifugal otor-driven pups with coupling designed for a wide range of applications such as:
More informationJET SELF-PRIMING CENTRIFUGAL ELECTRO PUMPS
JT SL-RMN NTRUL LTRO UMS TNL DT Operating range: fro. to. /h with head up to etres. Liquid quality requireents: clean, free fro solid or abrasive containants, non-viscous, non-aggressive, uncrystallised
More informationLowara. Centrifugal pumps with open impeller and flanged connections. SHO Series MARKET SECTORS CIVIL, INDUSTRIAL.
Centrifugal pumps with open impeller and flanged connections SHO Series MARKET SECTORS CIVIL, INDUSTRIAL. APPLICATIONS Industrial washing machines. Commercial dishwashers. Washing of metal parts, surface
More informationSeries 80 In-Line Mounted Centrifugal Pumps
Bulletin B-G Bell & Gossett Series In-Line Mounted Centrifugal Pumps Applications Hydronic Heating & Cooling Systems Industrial Process General Service Pressure Boosting Advantages Close Coupled Space
More informationSplit case double suction centrifugal pump. Technical data Serie: DPAS C
Split case double suction centrifugal pump Technical data Serie: DPAS C Table of Contents 1 Introduction 1.1 Fields of Application... 1. Pumped Liquids... 1.3 Design... 1. Bearings... 1.5 Shaft Seal...
More informationLKH-110 Multi-Stage Centrifugal Pumps Sanitary version with multi voltage motor, complete unions, legs and shroud
Connections: SMS 9612-3887-01 4497 2x160 SSS 2.2 220-240D/380-420Y 9612-3887-02 4797 2x160 FSS 2.2 220-240D/380-420Y 9612-3887-03 4640 2x160 SSS 3.0 220-240D/380-420Y 9612-3887-04 4941 2x160 FSS 3.0 220-240D/380-420Y
More informationEtaline/Etaline-R. In-line pumps. 50 Hz. Applications
Type Series Booklet 11./-EN Etaline/Etaline-R In-line pups Hz Applications F Heating systes F Air-conditioning systes F Cooling circuits F Service water systes F Water supply F Industrial recirculation
More informationUNISELB. Self-priming dirty water pump
UNISELB Self-priming dirty water pump GB 7 UNISELB benefits that ensure operational safety and cost-effectiveness in continuous operation. TABLE OF CONTENTS Non-clogging system Starting at DN, the non-clogging-system
More informationMotorised valve for neutral gases and liquids G 1/2 to G 1 female thread Cartridge system Operating pressure 0.9 to 10 bar (see table)
otorised valve for neutral gases and liquids G /2 to G female thread Cartridge system Operating pressure 0.9 to 0 bar (see table) 20 Description (standard valve) otorised valve for e. g. hot water, oil,
More informationMATERIAL SPECIFICATION FOR GABION BASKETS AND MATS
ONTARIO PROVINCIAL STANDARD SPECIFICATION OPSS.PROV 1430 NOVEMBER 2017 (Forerly OPSS 1430, Noveber 2012) Note: The PROV published in Noveber 2017 replaces OPSS 1430 COMMON, Noveber 2012 with no technical
More informationCENTRIFUGAL PUMPS FRAME MOUNT 13" FEATURES
FEATURES Volute: Cast iron for heavy-duty service; back pullout design; can be rotated for ease of installation; 6 x 8-13 and 8 x 10-13 are split volutes for reduction in radial bearing load Impeller:
More informationUPA 150C. 50 Hz. Applications. Submersible Borehole Pumps for Well Diameters of 150 mm (6 inches) Operating Data. Design. Designation (Example)
Type Series Booklet 3400.52/4 -- 10 Applications Suitable for handling clean or slightly contaminated water in applications such as: -- domestic water supply -- general water supply -- irrigation and spray
More informationThe ZSH stepper motor convinces with its robust housing with high-strength cable gland. The motor is waterproof up to 10 m with the IP68 option.
/ZSH HRSH ZSH Stepper otor Robust. Powerful. Reliable. Phytron s HRSHEnvironment motors are particularly suitable for challenging applications in mechanical engineering and industry. Challenging conditions
More informationCharacteristics curve Fluid: water p: 1 bar. Weight. Sectional diagram. no. [kg]
otorised valve For neutral gases and liquids G / to G female thread Cartridge system ublication 7559.06.06.97 Operating pressure -0.9 to 0 bar (see table) Catalogue index 6 0 series Description (standard
More informationTPHK Series. Immersible Pump
Series Immersible Pump Contents General Data Performance Range Sectional Drawing Performance Curves/Technical Data T T T T Series Immersible Pump Hz Power:. -. kw Head: Up to M Flow: Up to L/min Hz Power:.
More information82880 series 2/2-way motorised valves
> > ort size: G1/2... 1 > > Low power consumption > > Wear-resistant ceramic rotary action sliding plate > > Valve remains on last setting if power lost > > Will handle contaminated fluids Technical features
More informationATL 18 ~33 Series Flat Bed CNC Lathe
Precision CNC Flat bed Lathe Go SIMPLE! GO EASY! ATL 18 ~33 Series Flat Bed CNC Lathe The Easiest Conversational NC lathe you can trust!!! Technology Creativity Reliability An Unswerving Coitent to Excellence
More informationDURA-TAC ROTARY ACTUATORS SRA SERIES JG SERIES BALL DRIVEN RACK DRIVEN
DURATAC JG SERIES BALL DRIVEN SRA SERIES RACK DRIVEN See Page 51.1 See Page 52.1 DURATAC Rotary Actuators JGSERIES BALL DRIVEN DURATAC JG1000 is an economic rotary actuator with rotary motion achieved
More informationTPHK Series. Immersible Pump
TPHK Series Immersible Pump Contents General Data Performance Range Sectional Drawing Performance Curves/Technical Data TPHK T TPHK T TPHK 8T TPHK T TPHK Series Immersible Pump Hz Power:. -.8 kw Head:
More informationflexible couplings for pipe connections with axial restraint
www.arpol.com A R P O L F I X flexible couplings for pipe connections with axial restraint 1 TABLE OF CONTENTS Advantages & installation Sealing & anchoring system 4 5 Nominal charts 6 Material specifications
More informationService instructions. CR, CRI, CRN 10, 15 and /60 Hz 1/3~
Service instructions CR, CRI, CRN 10, 15 and 20 50/60 Hz 1/~ 1. Type identification... 2 1.1 Nameplate... 2 1.2 Type key... 1. Code for shaft seal... 4 2. Tightening torques and lubricants... 5. Service
More information400 SERIES GRINDER PUMPS 41502, 42202,43302, AND MODELS
Section: MOYNO 500 PUMPS Page: 1 of 6 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 400 SERIES GRINDER PUMPS 41502, 42202,43302, AND 44402 MODELS DESIGN FEATURES Housing: Cast iron Pump Rotor: Chrome
More informationZero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
More informationPART MATERIAL FINISHING
FDL A0(A0) Fire Damper FDL is equipped with electrical actuator, junction box and fusible link Halton FDL fire dampers are type-approved class A0(A0) fire dampers for use in offshore, marine and navy ventilation
More informationThis FDB2 has been customized with the following options: NORSOK flanges, control enclosure, ATEX certified components and steel tubing
FDB A0(A0) Fire And Gas Damper This FDB has been customized with the following options: NORSOK flanges, control enclosure, ATEX certified components and steel tubing Halton FDB fire dampers are type-approved
More informationHigh-efficiency Circulator Pump. Rio-Eco N / Rio-Eco Z N. Type Series Booklet
High-efficiency Circulator Pump Rio-Eco N / Rio-Eco Z N Type Series Booklet Legal information/copyright Type Series Booklet Rio-Eco N / Rio-Eco Z N All rights reserved. The contents provided herein must
More informationMATERIAL COMBINATION NUMBER 2: Corrosive environment requiring harder, wear-resistant seating faces and resistance to dezincification.
Cast Iron Slide Gates Spec Sheet General The contractor shall furnish and install the following cast iron slide gate assemblies as listed on the Gate Schedule and detailed on the manufacturer s drawings.
More informationRS /M MZ SERIES
The RS 310-410-510-610/M MZ burners series covers a firing range from 1300 to 6300 kw, and it has been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic
More informationZHM CT Series. Technical Datasheet. Gear Flow Meters in Cartridge Design for paint applications, optimized with regard to flushing and to weight
www.kem-kueppers.com Technical Datasheet ZM CT Series Gear Flow Meters in Cartridge Design for paint applications, optimized with regard to flushing and to weight Certified zertifiziert according gemäß
More informationPumping of clear unfilled liquids in housing, agricultural and industrial sectors.
operating limits Flow rates up to : 98 m 3 /h Head up to : Max. discharge pressure : Max. suction pressure : Temperature range : 25 m CE 16 et 25 bar 1 bar - 15 to +12 C* Max. ambient temperature : + 4
More informationGreen Laser 8 times better visibility
P Mk2 Docuenting Portable Infrared Theroeters Cutting Edge Technology for Maintenance Technicians INFRARED Teperature Range up to 3 C Green Laser 8 ties better visibility Rugged with Protective Rubber
More informationCatalogue guide. MARIO PINTO SPA Strada delle Cacce Torino page 1 di 13
Catalogue guide MARIO PINTO SPA Strada delle Cacce 21-10135 Torino www.live-tooling.com www.mariopinto.it page 1 di 13 PRODUCTS MANUFACTURING PHILOSOPHY Our Live Tools are entirely developed, designed
More informationLiquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design SIHI extruvac LEME 13, LEME 155 Pressure range: Suction volume flow: 1 to 113 mbar 3 to 17 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum pumps are displacement
More informationCutting Plotter. CE6000 Series. Specifications CE CE AMO. Item CE CE bit CPU Grit rolling type, digital servo drive
Cutting Plotter. CE6000 Series Specifications Ite CE6000-40 CE6000-60 CPU 32-bit CPU Configuration Grit rolling type, digital servo drive CE6000-120 CE6000-120- AMO Max. cutting area 375 x 50 *1 603 x
More informationBONOMI NORTH AMERICA SERIES 500N - 500S
BOI RTH AERICA SERIES 500N - 500S NYON COATED DISC CF SS DISC anually operated butterfly valves. Epoxy coated cast iron wafer body. Full port sizes / to. EPD resilient seat -0 F to 50 F. API609 face to
More informationEngineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard
Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard 5. Input Cover 6. O-Ring 7. Hex Head Cap Screw 8. Input
More informationTrunnion bearing housings for grinding mills FSDR.. K series
Trunnion bearing housings for grinding mills FSDR.. K series Bearing types Spherical roller bearings Bearing dimension series 39, 48 and 49 Shaft diameter range 825 to 1 460 mm Typical bearing-shaft combinations
More informationTarget disk flowmeters Series DP Metallic flowmeter for liquids and gases
Target disk flowmeters Series DP Metallic flowmeter for liquids and gases Metallic, simple and robust construction Available for all flow directions Suitable for extreme pressure and temperature conditions
More informationOverview: Extensions Stepper motor Stepper motor with motor brake Permanent magnet brake for 24V supply DC
ZSH 7 to 7 -Phase Hyrid Stepper otor ZSH Precision Stepper otors The highly dynamic ZSH -phase hyrid stepper motors are constructed for operation in industrial environment. Holding torques:. to 7 Nm. ZSH
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.
MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines
More informationTarget disk flowmeter for liquids and gases
Target disk flowmeter for liquids and gases Metallic, simple and robust construction Available for all flow directions Suitable for extreme pressure and temperature conditions Low pressure drop Straight
More informationFisher 667 Diaphragm Actuators Size 80 and 100
Instruction Manual 667 Size 80 and 100 Actuators Fisher 667 Diaphragm Actuators Size 80 and 100 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 2 Maximum Pressure Limitations...
More informationTUBE AND SHEET DRILLS
TUBE AND SHEET DRILLS 03 Tube and sheet drills The flutes of the RUKO high performance tube and sheet drills are BN ground from the solid hardened form. Because BN (cubical boron nitride) is a much harder
More informationRepair Manual MK40A-MK45A-MK50A MK55A-MK60A-MK65A. Ref Rev.C General Pump is a Member of The Interpump Group
MK Repair Manual MK40A-MK45A-MK50A MK55A-MK60A-MK65A General Pump is a Member of The Interpump Group 8 INDEX 1. INTRODUCTION..................................................Page 3 2. REPAIR INSTRUCTIONS...........................................Page
More informationKTM-16/20 TECHNICAL DATA
TECHNICAL DATA Table Diameter : 1,600mm Max. Turning Diameter : 2,000mm Max. Turning Height : 1,750mm Table Indexing Degree : 0.001mm CNC Controller : FANUC 18i-TB ** Bed The bed has symmetrical structure
More informationNKV MULTISTAGE CENTRIFUGAL PUMPS WITH VERTICAL AXIS. 60 Hz
NKV MULTISTAGE CENTRIFUGAL PUMPS WITH VERTICAL AXIS 6 Hz Certificate of Compliance Certificate: 2392698 (115146 ) Master Contract: 1996 Project: 7371 Date Issued: 216-2-8 Issued to: DAB Pumps S.p.A. 14
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. The main is drilled out under pressure.
MUELLER SMALL DRILLING MACHINES 2.1 Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines are available in hand
More informationTABLE OF CONTENTS SERIES SPINDLES Cartridge Block Belt-Driven Motorized GILMAN SPINDLE SYSTEMS... 4 PRODUCT FEATURES...
spindles TABLE OF CONTENTS GILMAN SPINDLE SYSTEMS.... 4 PRODUCT FEATURES.... 5 ORDERING INSTRUCTIONS.... 6-8 1250 SERIES SPINDLES Cartridge.... 10 1875 SERIES SPINDLES Plain Cartridge.... 11 Positioning
More informationEN 1092 PN 10 EN 1092 PN 16 JIS B K ANSI B16.5 Class 150 ANSI B16.47 Class 150 BS 10 Table D
HG EN 1092 PN 10 EN 1092 PN 16 JIS 2238 10K ANSI 16.5 Class 150 ANSI 16.47 Class 150 S 10 Table D Stafsjö s knife gate valve HG is a bi-directional valve, particularly well suited for severe operating
More information4/3 Proportional Directional Valve, Size SAE 10
/ Proportional Directional Valve, Size SAE Q max =. gpm [ l/min], p max = psi [ bar] Direct acting, sliding-spool design, with solenoid operation Series PDFC- Description Series PDFC proportional directional
More informationFigure 11 Flange Adapter and Back-Up Ring
Flange Adapters Standard back-up rings are Standard back-up rings are convoluted ductile iron with AWWA C207 150 lb drilling. One edge of the back-up ring bore must be radiused or chamfered. This edge
More informationSwivel Sector Radial Penstock
Swivel Sector Radial Penstock 24/03/2015 - TAINTOR type radial penstock. - Mechanically welded stopboard with sectoral shape, fitted with side wheels to guarantee correct guiding of the penstock throughout
More informationMIG/MAG Welding Torch System ROBO WH 455 D ROBO WHPP 455 D liquid cooled
MIG/MAG Welding Torch System ROBO WH 455 D ROBO WHPP 455 D liquid cooled C E R T I F DIN EN ISO 9001 Q M - S I Y E T S D E M BINZEL. The right welding torch for every job. The welding torches belonging
More informationRSCC. Data Sheet. Load cells. Special features. Diagram of RSCC load cell. Design: 500 kg to 5 t. Design: 50 kg to 200 kg. B
RSCC Load cells Data Sheet Special features - Load cell with SG measurement system - aximum capacities: 50 kg to 5 t - Hermetically sealed (IP68) - Rust resistant materials - Legal for trade to 3000 divisions,
More informationLSA R & LSA H 49.1 Low Voltage Alternators - 4 pole
LSA R & LSA H 49.1 Low Voltage Alternators - 4 pole 30 to 30 kva - 0 Hz / 420 to 63 kva - 60 Hz Electrical and mechanical data Adapted to applications LSA R and LSA H alternators are enclosed alternators
More informationkyfor Your Utility Heating and Cooling
. kyfor Your Utility Heating and Cooling ky M-Series Plate Heat Exchangers Applications For your utility heating and cooling duties the industrial plate heat exchangers of Alfa Laval can be used. These
More informationGRUNDFOS DATA BOOKLET CRE, CRIE, CRNE. Frequency-controlled Multistage Centrifugal Pumps 50 Hz
GRUNDFOS DATA BOOKLET Frequency-controlled Multistage Centrifugal Pums z Contents General data E-ums Page Performance range, 9 min Page Performance range, 9 min Page Performance range, 9 min Page Performance
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationDrilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2
TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco
More informationSeries 4310 A Partnership for Success Series Battioni P agani Battioni Pagani Series Pompe natv ac.c om
Vacuum Pumps & Blowers 4310 Blower A Partnership for Success Commercial duty Battioni Pagani Battioni Pagani Pompe Vacuum pumps & Blowers Vacuum / Pressure Pumps MEC 2000-4000 607 - National Vacuum Equipment
More informationThree-Phase Induction Motors. By Sintayehu Challa ECEg332:-Electrical Machine I
Three-Phase Induction Motors 1 2 3 Classification of AC Machines 1. According to the type of current Single Phase and Three phase 2. According to Speed Constant Speed, Variable Speed and Adjustable Speed
More informationOverview: Extensions. Stepper Motors. Stepper motor with motor brake Permanent magnet brake for 24V supply DC
ZSH 7 to 7 -Phase Hyrid Stepper otor ZSH Precision Stepper otors The highly dynamic ZSH -phase hyrid stepper motors are constructed for operation in industrial environment. Holding torques:. to 7 Nm. ZSH
More informationTRAPEZOIDAL SHEETS. screening and bearing sheets TECHNICAL CATALOGUE
TRAPEZOIDAL SHEETS screening and bearing sheets TECHNICAL CATALOGUE www.balex.eu TRAPEZOIDAL SHEETS screening and bearing sheets March 2009 The content of this folder does not constitute a coercial offer
More informationIncremental encoders Blind hollow shaft or cone shaft pulses per revolution
Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80
More informationTuf-Lite III Fans 5000K Series Hub
Tuf-Lite III Fans 5000K Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 20 thru 30 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
More informationMUELLER GAS. DH-5/EH-5 Drilling. Reliable Connections. DH-5 Drilling Machine General Information 2. EH-5 Drilling Machine General Information 3
operating Instructions manual MUELLER GAS TAble of contents PAGE DH-5 Drilling Machine General Information 2 DH-5/EH-5 Drilling EH-5 Drilling Machine General Information 3 Operating Instructions 4-5 DH-5
More informationTWIN ROD CYLINDERS 6 CONTENTS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG TWIN ROD CYLINDERS6 CONTENTS TWIN ROD CYLINDERS 6 Features 745 Specifications/Order Codes 747 Inner Construction and Major Parts 748 Dimensions
More informationFAIRBANKS NIJHUIS 1590 SERIES SINGLE STAGE VERTICAL INLINE PUMP.
FAIRBANKS NIJHUIS 0 SERIES SINGLE STAGE VERTICAL INLINE PUMP www.fairbanksnijhuis.com FAIRBANKS NIJHUIS 0 Series Single Stage Vertical Inline Pump Capacities to 00 GPM (,00 m/hr) Heads to 0 Feet ( m) Temperatures
More informationInsertion Flow sensor for continuous flow measurement
Insertion Flow sensor for continuous flow measurement Economic integration into pipe systems 2 wire frequency coil (sinusoidal) version 3 wire frequency Hall effect (pulse) version to directly interface
More information/2 way motorised valves
8880 / way motorised valves >> ort size: G/... >> Low power consumption >> Wearresistant ceramic rotary action sliding plate >> Valve remains on last setting if power lost >> Will handle contaminated fluids
More informationW-K-M Model MA-1 DynaCentric Butterfly Valve
Page 1 of 16 R E P A I R M A N U A L W-K-M Model MA-1 DynaCentric Butterfly Valve Page 2 of 16 Published October 2001 W-K-M and DynaCentric are trademarks of Cooper Cameron Corporation Cooper Cameron Corporation,
More informationSLIDE GATE. The MU series is used mainly in water treatment, irrigation, hydraulic works and hydro-electric power plants.
SLIDE GATE The model is a rectangular penstock suitable for wall and thimble mounting, with a resilient sealing member applied to all 4 sides. There are two different designs, which are size dependent,
More informationMUELLER E-5TM. and D-5TM. Drilling Machines. Reliable Connections. E-5 General Information 2. D-5 General Information 3. Operating Instructions 4-5
operation Instructions manual MUELLER E-5TM and D-5TM TAble of contents PAGE E-5 General Information 2 Drilling Machines D-5 General Information 3 Operating Instructions 4-5 E-5 Parts 6 D-5 Parts 7! WARNING:
More informationRotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
More informationBasket & Screen Data. Cylindrical baskets for simplex and duplex strainers up to 8" size
Basket & Screen Data Cylindrical baskets for simplex and duplex strainers up to 8" size Slant top baskets for Model 510 simplex and Model 570 duplex strainers sizes 8" to 36" Basket and Screen Design The
More informationSingle point load cell
PW15AH Single point load cell Special features - Nominal load 10 kg... 100 kg - Stainless steel - High ratio of minimum verification interval Y - Industrial Footprint (SP4M) - Degree of Protection IP68;
More informationRS /E-EV BLU SERIES
The RS/E and RS/EV series burners are characterised by a modular monoblock structure that means all necessary components can be combined in a single unit thus making installation easier, faster and, above
More informationDesign Engineering Manufacturing. CEMA Stock Components
Design Engineering Manufacturing CEMA Stock Components KWS profile Founded in 1972, KWS Manufacturing Company, Ltd, is the leader in the design and manufacture of conveying equipment for the bulk material
More informationPOWER PRICE UNI. powerful UNF METAL. UNCPower UNIVERSAL TAPS. power ful. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER UNIVERSAL TAPS SAL UNIVERSAL
MADE BY UNIVERSALtaps TOP QUALITY FROM GERMANY at a Power Price TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT Form universal
More information2-pole design. New: Semi-hermetic compressors with 2-pole drive motor for mains voltages of 60 Hz. Now for 60 Hz mains voltage
2-pole design Semi-hermetic compressors with 2-pole drive motor for mains voltages of Hz New: Now for Hz mains voltage Baureihe HG series HG 2-pole 2-polig - t a glance t a glance Based on our compressors
More informationDUCTILE IRON FLANGE GATE VALVES
DUCTILE IRON FLANGE GATE VALVES DN350-500 PN10 16 Approved to use: Technical-Production Director - mgr inŝ. Jan Jurasz BARRIER FLANGE WEDGES TECHNICAL - MOTOR SPECYFICATION Prepared by P.Maślanka 10.2008
More informationIncremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution
Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm
More informationTABLE OF CONTENTS SERIES SPINDLES Cartridge Block Belt-Driven Motorized GILMAN SPINDLE SYSTEMS... 4 PRODUCT FEATURES...
spindles TABLE OF CONTENTS GILMAN SPINDLE SYSTEMS.... 4 PRODUCT FEATURES.... 5 ORDERING INSTRUCTIONS.... 6-8 1250 SERIES SPINDLES Cartridge.... 10 1875 SERIES SPINDLES Plain Cartridge.... 11 Positioning
More informationLEVEL Transmitters. SAP-300 display. Mono cable / Mono rod Mono segmented rod. Twin cable Twin rod Coaxial Pipe
Guided microwave level transmitters GENERAL DESCRITION The Guided Wave Radar level transmitter is designed for continuous level measuring of conductive or non-conductive liquids, pulps and solids. level
More informationAF-4 Grooved Flange Adapter
SUBMITTAL INFORMATION PROJECT NAME: ENGINEER: CONTRACTOR: SPEC. SECTION: MEMBER FEATURES & ADVANTAGES Designed for connecting ANSI/AWWA C110/A21.10 and ASME/ANSI B16.1 Class 125/ flanged end components
More informationma output signal with transmitter module. - Adjustable frequency output signal with pulse divider module
/ - ; 0 PSI Advantages / Benefits Wireless easy mounting and dismounting of sensor head by a Turn & Lock technique 3-wire Hall version to interface directly with PLC's (both NPN and PNP) Easy to connect:
More informationCONSTRUCTION MATERIALS
CHANNEL GATE The model is a rectangular penstock designed for open channel installation. A resilient sealing feature is incorporated on 3 sides, (both laterals and bottom), resulting in a perfect seal
More informationCONSTRUCTION MATERIALS SERVICE CONDITIONS. Alternative alloy materials, like AISI 904L or DUPLEX stainless steel, are available if required.
SLIDE GATE The model is a rectangular penstock suitable for wall and thimble mounting, with a resilient sealing member applied to all 4 sides. There are two different designs, which are size dependent,
More informationTHERMOWELLS CONSTRUCTION FROM BARSTOCK OR FABRICATED
age 1 of 5 THERMOWELLS CONSTRUCTION FROM BARSTOCK OR FABRICATED A thermowell is a thermally conductive socket recommended to: rotect the delicate instrument sensing elements against corrosive effects.
More informationPRODUCTS & SERVICES GUIDE
PRODUCTS & SERVICES GUIDE IT S YOUR MOVE. 2 ROCKFORD BALL SCREW ABOUT US Ian McBain founded Rockford Ball Screw (RBS) in 1973 utilizing his years of experience in the industry with the goals of providing
More informationFinite Element Analysis of Reciprocating Screw for Injection Molding Machine
Nagsen B. Nagrale et al. / International Journal of Engineering and Technology Vol.3 (3), 11, 191-199 Finite Eleent Analysis of Reciprocating Screw for Injection Molding Machine #1, Nagsen B. Nagrale,
More informationOPERATION AND MAINTENANCE INSTRUCTIONS AVK UNDERGROUND FIRE HYDRANT
1. INTRODUCTION Operation and maintenance manual for the series underground CLEARWAY fire hydrant 1 of 7 The designs, materials and specifications shown are subject to change without notice due to our
More informationDesign of a Microcontroller Based Automatic Voltage Stabilizer with Toroidal Transformer
Design of a Microcontroller Based utoatic Voltage Stabilizer with Toroidal Transforer Thet Htun ung Departent of Electrical Power Engineering Mandalay Technological University Myanar bstract- Every electrical
More informationExplosion proof rotary actuator - On/Off or programmable regulating actuator
Explosion proof rotary actuator - On/Off or programmable regulating actuator Direct mounting for quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Type 3004 can
More informationEconomic Style Electric Actuator. ITQ Series
Economic Style Electric Actuator ITQ Series BS EN ISO 900:000 ITQ 000 - Suitable for small ball valve automation. - Very high efficiency & cyclic life. - Free voltage (85~65 VAC,Phase) and optional 4VAC/DC
More informationPRODUCT DATASHEET MOTORIZED 2- OR 3-WAY CONTROL VALVES TYPE RH..D..
PRODUCT DATASEET OTORIZED 2- OR 3-WA COTRO VAVES TPE R..D.. Specialized periphery integrator in VAC IGIGTS Suitable for the control of hot and chilled water (0...+130 C) in VAC systems control of heating
More informationMODUBLOC MB SE SERIES
The MODUBLOC MB SE series of burners are characterised by a monoblock structure that means all necessary components can be combined in a single unit, making installation easier and faster. The series covers
More informationT40FM. Data Sheet. Torque flange. Special features. Overall concept. B en
T40FM Torque flange Special features Data Sheet - Nominal (rated) torque: 15 kn m, 20 kn m, 25 kn m, 30 kn m, 40 kn m, 50 kn m, 60 kn m, 70 kn m and 80 kn m - Nominal (rated) rotational speed up to 8000
More informationDewatering Pumps for Construction. Made. forthe. real. world
Dewatering Pumps for Construction Made forthe real world The World s Smartest Dewatering Pump From roads and bridges to tunnels and dams, construction sites are difficult places to work. Mud, slurry, stones
More informationRS /E-EV BLU SERIES
The RS/E and RS/EV series burners are characterised by a modular monoblock structure that means all necessary components can be combined in a single unit thus making installation easier, faster and, above
More information