TPHK Series. Immersible Pump
|
|
|
- Benedict Norris
- 5 years ago
- Views:
Transcription
1 TPHK Series Immersible Pump
2 Contents General Data Performance Range Sectional Drawing Performance Curves/Technical Data TPHK T TPHK T TPHK 8T TPHK T
3 TPHK Series Immersible Pump Hz Power:. -.8 kw Head: Up to M Flow: Up to L/min Hz Power:. -. kw Head: Up to M Flow: Up to L/min Outlet: ¾" -¼" Applications The TPHK Series is vertical multistage centrifugal pump, designed for industrial use, specially for machine tools. It is suitable to carry fluids such as water, coolant, light oil and other clean, non aggressive matters: - Industrial circulation system - Washing/cleaning system - Filtration system Model code Operating Conditions. Ambient temperature : Max. + C. Liquid temperature range : + C ~ + C. Operating pressure : Max. kg/cm². Submerged depth : Min. mm Pump Construction Immersible vertical multistage centrifugal pump, self-priming, co-axial pump/motor design, impellers mounted on extended motor shaft. Main working parts made by stainless steel. TPHK T - S Stainless steel series Number of Impellers Number of Stages Standard capacity m³/h Model name Motor Enclosure class : IP Insulation class : F. Nominal speed : / rpm Frequency range : / Hz Voltages Code : Code PH Hz Hz Q -/-V - AZ* -/-V -/-V AU* -/-V -/-V * The motor can be use in both / hz.
4 TPHK Series Immersible Pump Performance curve (Hz) P(kg/cm²) T T 8T T TPHK Series Hz 8 Q(m³/h) Q(L/min) Performance curve (Hz) P(kg/cm²). 8.. TPHK Series Hz... 8T.. T T T. 8 Q(m³/h) Q(L/min)
5 TPHK Series Sectional drawing Materials TPHK T/T NO. Part name Material Standard S series 8 8 Oil Seal Pump Casing Mechanical Seal Shaft Strap Impeller Intermediate chamber Sleeve Bearing Priming screw Suction intercon-nector Lock Nut Filter Flange NBR FCD SUS HSSH HGSH SUS SUS SUS SUS SUS SiC SUS SUS SUS SUS SUS TPHK 8T/T Options on request - Special mechanical seal Mechanical seal type Stationary Face/ Rotary Face Material Cup Gasket & O Ring HGSH HGSV HGSE HSSH HSSV HSSE (G)Carbon/ (S)Silicium carbide (S)Silicium carbide/ (S)Silicium carbide (H) HNBR (V) Viton (E) EPDM 8
6 TPHK T Electrical data Standard Model Phase ( Ø ) Voltage code Cycle ( Hz ) Volts (V) Input Power (W) Input Power (A) TPHK T - TPHK T - TPHK T - TPHK T - TPHK T - TPHK T - TPHK T - AZ AZ AZ AZ AZ AZ AU - / - - / - - / - - / - - / - - / - - / - - / - - / - - / - - / - - / - - / - - / / / / / / / / / / / / / / /.-. Maximum Stages Dimensions ( mm ) Model A (mm) B (mm) L (mm) N.W.(kg) A Rp/" L B.. 8 Ø TPHK T - TPHK T 8 - TPHK T - TPHK T - TPHK T - TPHK T - TPHK T - TPHK T - TPHK T - TPHK T 8 - TPHK T- TPHK T - TPHK T - TPHK T - TPHK T - TPHK T - TPHK T 8 - TPHK T - TPHK T- TPHK T- TPHK T
7 TPHK T Performance curve (Hz) P(kg/cm ) H(ft) P(psi) TPHKT Hz P(kW).... Q(m /h) Q(L/min)... 8 US GPM Q(m /h) Performance curve (Hz) P(kg/cm ) TPHKT Hz H(ft)..... Q(m /h) Q(L/min) P(psi) P(kW) US GPM Q(m /h)
8 TPHK T Electrical data Standard Model Phase ( Ø ) Voltage code Cycle ( Hz ) Volts (V) Input Power (W) Input Ampere (A) TPHK T - AZ - / - - / / /.-. TPHK T - AZ - / - - / -.-. / /.-. TPHK T - AZ - / - - / -.-. / /.-. TPHK T - AU - / - - / -.-. / /.-. TPHK T - AU - / - - / / /.-. TPHK T - AU - / - - / -.-. / /.-. TPHK T - Maximum 8 Stages AU - / - - / -.-. / /.-. Dimensions ( mm ) A PF /" L B.. 8 Ø Model TPHK T - TPHK T - TPHK T - TPHK T - TPHK T - TPHK T - TPHK T - TPHK T - TPHK T - TPHK T - TPHK T 8 - TPHK T - TPHK T - TPHK T - TPHK T - TPHK T 8 - TPHK T - TPHK T 8 - TPHK T - TPHK T 8 - A (mm) Hz / Hz / 8. / B (mm) L (mm) Hz / Hz /. /... N.W.(kg)
9 TPHK T Performance curve (Hz) P(kg/cm ) TPHKT Hz 8 Q(m /h) Q(L/min) H(ft) P(psi) P(kW) US GPM Q(m /h) Performance curve (Hz) P(kg/cm ) H(ft) P(psi) TPHKT Hz 8 Q(m /h) Q(L/min) 8 8 US GPM P(kW) Q(m /h) 8
10 TPHK 8T Electrical data Standard Model Phase ( Ø ) Voltage code Cycle ( Hz ) Volts (V) Input Power (W) Input Ampere (A) TPHK 8T - AZ - / - - / -.-. / /.8-. TPHK 8T - AZ - / - - / -.-. / /.-. TPHK 8T - AU - / - - / -.-. / /.-. TPHK 8T - Maximum Stages AU - / - - / / /.-. Dimensions ( mm ) 8. Model A (mm) B (mm) L (mm) N.W.(kg) L A PF ¼" TPHK 8T - TPHK 8T - TPHK 8T - TPHK 8T - TPHK 8T - TPHK 8T - TPHK 8T - TPHK 8T B XØ Ø
11 TPHK 8T Performance curve (Hz) P(kg/cm ) TPHK8T Hz 8 Q(m /h) Q(L/min) H(ft) P(psi) US GPM P(kW) Q(m /h) Performance curve (Hz) P(kg/cm ) H(ft) P(psi) TPHK8T Hz 8 Q(m /h) Q(L/min) P(kW) US GPM Q(m /h)
12 TPHK T Electrical data Standard Model Phase ( Ø ) Voltage code Cycle ( Hz ) Volts (V) Input Power (W) Input Ampere (A) TPHK T - AZ - / - - / -.-. / /.-. TPHK T - AU - / - - / -.-. / /.-. TPHK T - Q - / -.-. /.-. Maximum Stages Dimensions ( mm ) 8. Model A (mm) B (mm) L (mm) N.W.(kg) L A PF ¼" TPHKT - TPHKT - TPHKT - TPHKT - TPHKT B XØ Ø
13 TPHK T Performance curve (Hz) P(kg/cm ) TPHKT Hz 8 Q(m /h) Q(L/min) H(ft) P(psi) P(kW) US GPM Q(m /h) Performance curve (Hz) P(kg/cm ) - - TPHKT Hz 8 Q(m /h) Q(L/min) H(ft) P(psi) P(kW). US GPM Q(m /h)
14 Memo
15 Memo
16 All specifications are subject to change without notice.
TPHK Series. Immersible Pump
Series Immersible Pump Contents General Data Performance Range Sectional Drawing Performance Curves/Technical Data T T T T Series Immersible Pump Hz Power:. -. kw Head: Up to M Flow: Up to L/min Hz Power:.
TPHK Series. Immersible Pumps WALRUS PUMP. All specifications are subject to change without notice. 011
Series WRUS PUMP ll specifications are subject to change without notice. Immersible Pumps pplications The WRUS Series is vertical multistage centrifugal pump, designed for industrial use, specially for
Submittal Data Sheet Wilo MVI - Vertical Multistage Pumps
Wilo MVI Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM Hz H [ft] ηp [%] P [hp] 7 7.......7..9.......................... MVI -
Lowara. Centrifugal pumps with open impeller and flanged connections. SHO Series MARKET SECTORS CIVIL, INDUSTRIAL.
Centrifugal pumps with open impeller and flanged connections SHO Series MARKET SECTORS CIVIL, INDUSTRIAL. APPLICATIONS Industrial washing machines. Commercial dishwashers. Washing of metal parts, surface
UPA 150C. 50 Hz. Applications. Submersible Borehole Pumps for Well Diameters of 150 mm (6 inches) Operating Data. Design. Designation (Example)
Type Series Booklet 3400.52/4 -- 10 Applications Suitable for handling clean or slightly contaminated water in applications such as: -- domestic water supply -- general water supply -- irrigation and spray
Series 80 In-Line Mounted Centrifugal Pumps
Bulletin B-G Bell & Gossett Series In-Line Mounted Centrifugal Pumps Applications Hydronic Heating & Cooling Systems Industrial Process General Service Pressure Boosting Advantages Close Coupled Space
UNISELB. Self-priming dirty water pump
UNISELB Self-priming dirty water pump GB 7 UNISELB benefits that ensure operational safety and cost-effectiveness in continuous operation. TABLE OF CONTENTS Non-clogging system Starting at DN, the non-clogging-system
LKH-110 Multi-Stage Centrifugal Pumps Sanitary version with multi voltage motor, complete unions, legs and shroud
Connections: SMS 9612-3887-01 4497 2x160 SSS 2.2 220-240D/380-420Y 9612-3887-02 4797 2x160 FSS 2.2 220-240D/380-420Y 9612-3887-03 4640 2x160 SSS 3.0 220-240D/380-420Y 9612-3887-04 4941 2x160 FSS 3.0 220-240D/380-420Y
Split case double suction centrifugal pump. Technical data Serie: DPAS C
Split case double suction centrifugal pump Technical data Serie: DPAS C Table of Contents 1 Introduction 1.1 Fields of Application... 1. Pumped Liquids... 1.3 Design... 1. Bearings... 1.5 Shaft Seal...
Liquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design SIHI extruvac LEME 13, LEME 155 Pressure range: Suction volume flow: 1 to 113 mbar 3 to 17 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum pumps are displacement
High-efficiency Circulator Pump. Rio-Eco N / Rio-Eco Z N. Type Series Booklet
High-efficiency Circulator Pump Rio-Eco N / Rio-Eco Z N Type Series Booklet Legal information/copyright Type Series Booklet Rio-Eco N / Rio-Eco Z N All rights reserved. The contents provided herein must
Pumping of clear unfilled liquids in housing, agricultural and industrial sectors.
operating limits Flow rates up to : 98 m 3 /h Head up to : Max. discharge pressure : Max. suction pressure : Temperature range : 25 m CE 16 et 25 bar 1 bar - 15 to +12 C* Max. ambient temperature : + 4
FAIRBANKS NIJHUIS 1590 SERIES SINGLE STAGE VERTICAL INLINE PUMP.
FAIRBANKS NIJHUIS 0 SERIES SINGLE STAGE VERTICAL INLINE PUMP www.fairbanksnijhuis.com FAIRBANKS NIJHUIS 0 Series Single Stage Vertical Inline Pump Capacities to 00 GPM (,00 m/hr) Heads to 0 Feet ( m) Temperatures
EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8
EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8 KC-5 KC-8 Pump RPM 638 1022 Motor HP (kw) 0.33 (0.25) 0.50 (0.37) Oil Capacity, qts. (liters) 0.8 (0.76) Forced Drain w/ open suction, qts. (liters) 0.85 (0.80)
CENTRIFUGAL PUMPS FRAME MOUNT 13" FEATURES
FEATURES Volute: Cast iron for heavy-duty service; back pullout design; can be rotated for ease of installation; 6 x 8-13 and 8 x 10-13 are split volutes for reduction in radial bearing load Impeller:
Digital flow transmitter for continuous flow measurement
Digital flow transmitter for continuous flow measurement Compact or remote version for DN 06 to 400, PN10 Shows both flow rate and volume (with two totalizers) Automatic-calibration: TEACH-IN Simulation:
GEA VARIPUMP. GEA Hilge SIPLA. Single-stage, Self-priming Side Channel Pumps for Advanced Applications
GEA VARIPUMP GEA Hilge SIPLA Single-stage, Self-priming Side Channel Pumps for Advanced Applications Optimize Your Cleaning Processes Ensure maximum process safety with the GEA Hilge SIPLA pump series
Side. Channel Blower APEX DARGANG MACHINERY CORPORATION
Side Channel Blower APEX DARGANG MACHINERY CORPORATION Side Channel Blower Construction External bearing Cool-running Long life Motor Industrial quality /60Hz Squired-cage motor totally enclosed(ip55 )
Insertion Flow sensor for continuous flow measurement
Insertion Flow sensor for continuous flow measurement Economic integration into pipe systems 2 wire frequency coil (sinusoidal) version 3 wire frequency Hall effect (pulse) version to directly interface
Service instructions. CR, CRI, CRN 10, 15 and /60 Hz 1/3~
Service instructions CR, CRI, CRN 10, 15 and 20 50/60 Hz 1/~ 1. Type identification... 2 1.1 Nameplate... 2 1.2 Type key... 1. Code for shaft seal... 4 2. Tightening torques and lubricants... 5. Service
2-Way Proportional Logic Cartridge Valve Model FE.. (Series 1X and 2X) PSI (315 bar) F with electrical connection 12 X Y
RA 9 /6.98 -Way Proportional Logic Cartridge Valve Model FE.. (Series X and X) Size 6... 6... 6 PSI (5 bar)... 75 GPM (8 L/min) RA 9 /6.98 Replaces: 5.9 Characteristics: Single land throttle valve (main
4.2 - PUMP MAINTENANCE MODELS: AC, AS, WC, WS
4.2 - PUMP MAINTENANCE MODELS: AC, AS, WC, WS 4.2.1 - EXPLODED VIEW DRAWING REF NO. 1 2 4 QTY 3 1 1.5 5 ¾ HP HP HP HP HP DESCRIPTION PART # 1 CASE 1.25 x 1 NPT 018266 1 CASE 1.25 X 1 NPT 018268 1 CASE
RS /M MZ SERIES
The RS 310-410-510-610/M MZ burners series covers a firing range from 1300 to 6300 kw, and it has been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic
TECHNICAL DATA. ErP R eady NewMotorTechnolgy. FERRIER PUMPS LTD Edinburgh Glasgow Aberdeen
FERRIER PUMPS LTD Edinburgh Glasgow Aberdeen www.ferrierpumps.co.uk Electronically controlled high-efficiency pumps for heating, air conditioning, cooling and sanitary water ErP R eady NewMotorTechnolgy
400 SERIES GRINDER PUMPS 41502, 42202,43302, AND MODELS
Section: MOYNO 500 PUMPS Page: 1 of 6 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 400 SERIES GRINDER PUMPS 41502, 42202,43302, AND 44402 MODELS DESIGN FEATURES Housing: Cast iron Pump Rotor: Chrome
420 SERIES REPAIR PARTS INDEX
SECTION 420P PAGE 1 SUPERSEDES 420P PAGE 1 420 SERIES REPAIR PARTS INDEX READ AND UNDERSTAND THE PUMP AND MOTOR INSTRUCTIONS BEFORE ATTEMPTING TO INSTALL, DISASSEMBLE OR REPAIR THE PUMP SECTION 420P PAGE
Water Circulation Pumps & Circulators PERFORMANCE CURVES. CI Pumps. FI Pumps. Taco Curve Book B
Water Circulation Pumps & Circulators PERFORMANCE CURVES FI Pumps CI Pumps Taco Curve Book 300-2.5B Effective April 27, 2017 (Supersedes March 31, 2012 CAPACITY IN LITERS/SEC FLOW IN GALLONS PER MINUTE
ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL
Main Features - Compact and heavy-duty industrial model - Interface: Bit-parallel, push pull ΠShort circuit proof - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096
Valve repair and testing technique
High standard in precision. Valve repair and testing technique Quality Made in Germany by GmbH & Co. KG Grinding and Lapping Machines for Industrial Valves VENTA Portable grinding and lapping machines
RS /E-EV BLU SERIES
The RS/E and RS/EV series burners are characterised by a modular monoblock structure that means all necessary components can be combined in a single unit thus making installation easier, faster and, above
INSERTION paddle wheel flowmeter for continuous flow measurement
INSERTION paddle wheel flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both
CENTRIFUGAL PUMPS FPE Series
OPERATING MANUAL CENTRIFUGAL PUMPS FPE Series Model : Model No.: Table of Contents Page 1. Maintenance 1 1.1. Disassembly 1 1.1.1. General 1 1.1.2. Impeller 1 1.1.3. Complete disassembly 1 1.2. Assembly
Measuring and Controlling Unit Multronic OC
Measuring and Controlling Unit Multronic OC One channel measuring and controlling unit for ph / conductivity / Chlorine measuring Automatic temperature compensation Measuring and control behaviour simultaneously
DUOLINE. Rotary vane pumps for all applications in the low and medium vacuum range
DUOLINE Rotary vane pumps for all applications in the low and medium vacuum range DUOLINE Rotary vane pumps for all applications in the low and medium vacuum range The two-stage high-performance rotary
4/3 Proportional Directional Valve, Size SAE 10
/ Proportional Directional Valve, Size SAE Q max =. gpm [ l/min], p max = psi [ bar] Direct acting, sliding-spool design, with solenoid operation Series PDFC- Description Series PDFC proportional directional
NKV MULTISTAGE CENTRIFUGAL PUMPS WITH VERTICAL AXIS. 60 Hz
NKV MULTISTAGE CENTRIFUGAL PUMPS WITH VERTICAL AXIS 6 Hz Certificate of Compliance Certificate: 2392698 (115146 ) Master Contract: 1996 Project: 7371 Date Issued: 216-2-8 Issued to: DAB Pumps S.p.A. 14
Data Sheet for Precision Potentiometer
Electrical Data 3turn 5turn 1turn Effective electrical angle of rotation 1.) 18 ±5 18 ±5 36 ±5 Total resistance 1.) 2 Ohm..5 kohm 2 Ohm..1 kohm Resistance tolerance ±3% (±1%) Independent linearity (best
2-Inch Thermoplastic Dewatering Pumps Refer to pump manual for General Operating and Safety Instructions.
Specifications Information and Repair Parts Manual 3824-99, 3825-99 & 382A-99 Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator ANSI version Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam
RS /E-EV BLU SERIES
The RS/E and RS/EV series burners are characterised by a modular monoblock structure that means all necessary components can be combined in a single unit thus making installation easier, faster and, above
Posiflow Proportional Solenoid Valves % ^ ) 2/2. Brass or Stainless Steel Bodies 1/8" to 1/2" NPT. Proportional Valves. Features.
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/8" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Control achieved by applying straight voltage between 0 and 24 VDC
Proportional Directional Control Valves Nominal sizes 16 and 25
Proportional Directional Control Valves Nominal sizes 16 and 25 Pilot operated, electrically adjustable Interface acc. to DIN 24 340 and ISO 4401 PN [p max. ] = 315 bar 7502968.06.01.06 Description Design
Pressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Ship building Measurement and control technology
Type PLC Fitting. Valve for Continuous control. Diaphragm valve. Output
Digital Inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
Chapter 3. Experimental set up. 3.1 General
Chapter 3 Experimental set up 3.1 General Experimental set up and various swirl flow generators such as full length twisted tapes, increasing and decreasing order of twist ratio sets and full length screw
Pressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
5000 Series Single Impeller Firefighter
5000 Series Single Impeller Firefighter Pump made in Australia & fitted to genuine brand name engines SERVICING INSTRUCTIONS WARNING: ALL ELECTRICAL WORK TO BE PERFORMED BY SUITABLY QUALIFIED ELECTRICAL
Electromagnetic Flow Transmitter
Electromagnetic Flow Transmitter Sensor in solid state technology Working as a transmitter and/or as an On/Off controller Automatic-calibration of full scale: Teach-In Clean in place (CIP) Type can be
Standard Bourdon tube pressure gauges EN 837-1
Standard Bourdon tube pressure gauges EN 871 Application For gaseous and liquid media which are not highly viscous, do not crystallize and are not aggressive to copper alloys. For measuring gas or vapour,
Fristam Data Sheets FRISTAM PUMPS FREEFAX:
Freephone lines are open between 8.00am and 5.30pm Monday to Friday FREEFAX: 0800 801404 FRISTAM PUMPS Moody Direct have been authorised as an approved stockist of Fristam Pump parts and components. A
T11 - T12 - T13. Electrical contacts stainless steel thermometers. Specifications (20 C) Ø Ø Ø 160 mm
Electrical contacts stainless steel thermometers T11 - T12 - T13 Ø - Ø 1 - Ø 160 mm Derived from the TX thermometers of nominal diameter, 1 and 160, of which they possess all the characteristics, the T11,
TYPE 3740 WET RUNNING CARTRIDGE SPLIT SEAL Technical Specification
A Mating Ring B Mating Ring Adapter Assy. C Sealing Element Gasket D Sealing Element Strip E Sealing Element O-ring F Set Screw G Primary Ring H Retaining Ring I Spring Adapter Assy. Set J O-ring (Split)
Ball screw spindles are roll manufactured using modern machines prior to hardening and polishing.
Functional overview Ball screw spindle Ø 16 Ball screw spindle Ø 25 Overview 2-45 2-46 2-46 Ball screw nut 2 2-47 Ball screw nut 3 2-47 Clamping blocks for nut version 3 2-48 for spindle Ø 16 2-49 for
Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process
ASME B73.1-2012 [Revision and Consolidation of ASME B73.1-2001 (R2007) and ASME B73.5M-1995 (R2007)] Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process AN AMERICAN NATIONAL
Rotron ½ AXIMAX 1 Small Vaneaxial Fans
Rotron ½ AXIMAX Small Vaneaxial Fans General Small Vaneaxial Information Small Vaneaxial Fans are compact, high-speed fans whose airflow is parallel to the motor shaft. The impeller and guide vanes are
INLINE flowmeter for continuous flow measurement
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
Measuring and Controlling Unit Multronic
Measuring and Controlling Unit Multronic Modular system Up to 3 measurement variables with control functions in one housing Free combination of the measurement variables ph / Redox / temperature / conductivity
Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2
TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco
2SP1 January 2018 siemens.de/spindeln
Milling Motorspindle 2SP1 January 2018 siemens.de/spindeln Standardized milling motor spindle 2SP1 Compact and all-inclusive in the spindle box Increasing requirements for higher metal removal rates with
RS /E-EV BLU SERIES
The RS/E and RS/EV series burners are characterised by a modular monoblock structure that means all necessary components can be combined in a single unit thus making installation easier, faster and, above
Pressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
Rotron PROPIMAX 3 Tubeaxial Fans
Rotron PROPIMAX Tubeaxial Fans General Tubeaxial Information Tubeaxial Fans are integrated axial flow air moving devices in which the motor rotor is cast inside the impeller to achieve the smallest possible
ma output signal with transmitter module. - Adjustable frequency output signal with pulse divider module
/ - ; 0 PSI Advantages / Benefits Wireless easy mounting and dismounting of sensor head by a Turn & Lock technique 3-wire Hall version to interface directly with PLC's (both NPN and PNP) Easy to connect:
SECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 52-4777 or visit www.grizzly.com/parts to check
535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar
Target disk flowmeter for liquids and gases
Target disk flowmeter for liquids and gases Metallic, simple and robust construction Available for all flow directions Suitable for extreme pressure and temperature conditions Low pressure drop Straight
flexible couplings for pipe connections with axial restraint
www.arpol.com A R P O L F I X flexible couplings for pipe connections with axial restraint 1 TABLE OF CONTENTS Advantages & installation Sealing & anchoring system 4 5 Nominal charts 6 Material specifications
INLINE flowmeter for continuous flow measurement
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions
MAINTENANCE CLEANING. MECHANICAL SEAL REPLACEMENT Refer to figures 1 and 2. SHIM ADJUSTMENT
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
- Clamshell - OD-Mounted Pipe Cutting and Beveling Machine. Split frame. cutting and beveling simultaneously
Split frame OD-Mounted Pipe Cutting and Beveling Machine The series machine is ideal for all types of pipe cutting, beveling and end preparation. The split frame design allows the machine to split in half
PARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
ph or ORP Transmitter
ph or ORP Transmitter Programmable outputs: two transistor and single or dual analog 4-20 ma (Process + Temp) Removable backlighted display Universal process connection Compatible with 120 mm ph/ ORP probes
XXXX e. X d.. X X X a
The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
PARTS LIST SERIES 5200
File No. 6052.120 Date: January 6, 2003 Supersedes: 6052.120 Date: June 1, 1996 SUMP PUMP NEW DESIGN 5200 SUMP PUMP PARTS IDENTIFICATION ITEM DESCRIPTION PAGE ITEM DESCRIPTION PAGE ITEM DESCRIPTION PAGE
Digital flow ELEMENT transmitter for continuous flow measurement
ELEMENT Transmitter Digital flow ELEMENT transmitter for continuous flow measurement Type can be combined with... PN10, DN15 to DN400 fluidic process connection Programmable outputs : one or two transistor
CITIZEN K 16 VIP. CNC automatic lathe with bar loader. Year of manufacture 2005
CITIZEN K 16 VIP CNC automatic lathe with bar loader Manufacturer Model CITIZEN K 16 VIP Year of manufacture 2005 Control FANUC 31i - TA Machine number K1216 / 0073 Bar loader FMB minimag 18-3200 / 1305
Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution
Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm
GI/EMME SERIES
The GI/EMME 1400-4500 series of burners covers a firing range from 820 to 4650 kw. They ave been designed for high output users and they are suitable for matching with every kind of boilers, with normal
.37 THRU. SPACED AS SHOWN ON A Ø 4X HOLES Ø 3.40 [86.4] BOLT CIRCLE [29.0] 4.17 Ø[105.79] BLOWER [5.33] DISCHARGE .21 MOTOR COOLING DISCHARGE 2
![.37 THRU. SPACED AS SHOWN ON A Ø 4X HOLES Ø 3.40 [86.4] BOLT CIRCLE [29.0] 4.17 Ø[105.79] BLOWER [5.33] DISCHARGE .21 MOTOR COOLING DISCHARGE 2](/thumbs/79/79162947.jpg ".37 THRU. SPACED AS SHOWN ON A Ø 4X HOLES Ø 3.40 [86.4] BOLT CIRCLE [29.0] 4.17 Ø[105.79] BLOWER [5.33] DISCHARGE .21 MOTOR COOLING DISCHARGE 2")
12/24 VDC Input, Standard Output INCH [MM] Ø 3.27 [83.1] FLANGE "B" 9.72 [18.3] 4X HOLES Ø.23/[5.8] THRU. EQ. SPACED AS SHOWN ON A Ø2.8/[71.] BOLT CIRCLE.11 [2.67] 2.97.7 [75.44] [1.9] (FLANGE OFFSET).35
Rev Sondex Pumps Installation Guide. Submersible wastewater pumps - S-WP series
Rev.16102013 Sondex Pumps Installation Guide Submersible wastewater pumps - S-WP series 1. Content 2. Identification plate... Page 2 3. Applications... Page 3 4. Product specification... Page 3 5. Handling...
LSA R & LSA H 49.1 Low Voltage Alternators - 4 pole
LSA R & LSA H 49.1 Low Voltage Alternators - 4 pole 30 to 30 kva - 0 Hz / 420 to 63 kva - 60 Hz Electrical and mechanical data Adapted to applications LSA R and LSA H alternators are enclosed alternators
110FC STRAIGHT LINE EDGER VICTRALUX 110FC MODEL VICTRALUX 110FC
STRAIGHT LINE EDGER VICTRALUX MODEL STRUCTURE AND MACHINE DESCRIPTION The straight line edger is made up of a pair of shoulders of considerable length (200 mm) connected by a base. The beams have been
OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5)
Electronic pressure measurement OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5) WIKA data sheet PE 81.65 Applications Hydraulics and pneumatics Pumps and compressors
Producing weld preparations is done in seconds
P.O. Box 5, NL 6580 AA MALDEN Th. WORTELBOER B.V. HOLLAND phone +31 24 358 65 14 fax +31 24 358 70 79 www.wortelboer.ws Producing weld preparations is done in seconds NEW MODELS 2011/2013 PBM PIPE END
onlinecomponents.com
RE8-AH5-6 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 8- Fax +49 7938 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart
Online data sheet DFV60A-22PK65536 DFV60 MEASURING WHEEL ENCODERS
Online data sheet DFV60A-22PK65536 DFV60 A B C D E F Illustration may differ Ordering information Type Part no. DFV60A-22PK65536 1051331 Other models and accessories www.sick.com/dfv60 H I J K L M N O
Absolute Rotary Encoder EXAG Explosion Proof. Canopen
Main Features - Approval: II 2 G/D EEx d II C T6 - Heavy-duty industrial model - Interface: CAN - Protocol: - Max. 65536 steps per revolution (16 Bit) - Max. 16384 revolutions (14 Bit) - Code: Binary Programmable
FAS 10 mm PICOSOL Direct acting solenoid valve
FS 0 mm PICOSOL > > /, /; Manifold mounting > > Long life 00 million cycles > > Compact Design > > Low power consumption Technical features Medium: ir, oxygen, neutral gases (0 %... 9 % humidity, non condensing),
TETRA COMPACT - E AND FLEXI - PRO
TETRA COMPACT - E AND FLEXI - PRO THE ENHANCED SERVO BUNDLE Motor Power Company introduces its new brushless servo bundle: TETRA COMPACT- ENHANCED, brushless servomotors, perfectly matched with the FLEXI-PRO
Design and applications
Design and applications The measuring device operates largely independent of viscosity and is suitable for indicating the flow rate of water, acids, alkaline solutions and gases. Every device is calibrated
Accessories for high-pressure cleaners
Accessories for high-pressure cleaners Practical and diverse Accessories for high-pressure cleaners 62 Effective cleaning without splashing water Floor cleaner Round Cleaner UFO short Ø 300 mm Round Cleaner
PARTS LIST FOR MODEL 7000 SERIES - 17/46
ITEM PARTS LIST FOR MODEL 7000 SERIES - 17/46 1 Rotor 3 Housing 1 4 End Plate 6 Drive End Cover 1 7 Free End Cover 1 8 Timing Gear Set 1 9 Bearing, Drive End 10 Bearing, Free End 1 Lip Seal, Viton 4 13
Overview Grinding Applications
GRINDING 14E Overview Grinding Applications SRG Workpieces High precision grinding Steady Rests Grinding diameter Ø 20-85 mm Camshafts Crankshafts Shafts Chapter 1 Fine adjustment of the grinding center
OEM pressure sensor For industrial applications Models O-10 (T), O-10 (5)
Pressure OEM pressure sensor For industrial applications Models O-10 (T), O-10 (5) WIKA data sheet PE 81.65 for further approvals see page 11 Applications Hydraulics and pneumatics Pumps and compressors
Booster Pumping Station 115 Booster Pump Procurement
Madison Water Utility Tom Heikkinen General Manager 119 E. Olin Avenue Alan L. Larson PE, BCEE Principal Engineer Madison, Wisconsin 53713 Telephone: 608 266-4653 FAX: 608 266-4426 email: allarson@cityofmadison.com
Accessories for high-pressure cleaners
Accessories for high-pressure cleaners Practical and diverse Accessories for high-pressure cleaners 70 Effective cleaning without splashing water Floor cleaner Round Cleaner UFO short Ø 300 mm Round Cleaner
GWR2 Installation guide: Guided Wave Radar
GWR2 Installation guide: Guided Wave Radar -1-4-wire TDR-Sensor with single rod or coaxial probe for continuous level measurement and point level detection in liquids, with analog and switching output.
XXXX e. X d.. X X X a
The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
Pressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding