CITIZEN K 16 VIP. CNC automatic lathe with bar loader. Year of manufacture 2005

Transcription

1 CITIZEN K 16 VIP CNC automatic lathe with bar loader Manufacturer Model CITIZEN K 16 VIP Year of manufacture 2005 Control FANUC 31i - TA Machine number K1216 / 0073 Bar loader FMB minimag / 1305 C Year of manufacture: 2006 KISTNER GmbH & Co. KG Industriestraße Thurnau

2 TECHNICAL DATA Machine CITIZEN K16 VIP Main spindle Max. machining diameter 16 mm Max. machining length 200 mm Output 3,7 kw Spindle speed rpm Spindle indexing C axis 0,001 Sub-spindle Max. machining diameter 16 mm Max. machining length 80 mm Output 1,1 kw Spindle speed rpm Spindle indexing C axis 0,001 Driven tools on vertical holder Speed rpm Output 0,4 kw Number of tools 4 Tooling system Turning tools 5 Drilling tools (front) 4 End working tools (back) 4 Tool holder, quill (diameter) Tool holder, turning tools (shank section) 20 mm 12 mm Rapid traverse X1, Y1 axes Z1, Z2 axes 2 - CITIZEN K 16 VIP

3 Machine specification Required space L x H x W, approx. Centre height Machine weight, approx. Input power x x mm mm kg 8 kva Bar loader FMB minimag 18 Material passage in the guide channel Power input Feed force Feeder travel speed Return speed Load capacity Remnant length Dimensions (L x H x W) Weight Loading time Oil filling Operating voltage range Control voltage Compressed air connection Air consumption Noise emission 2 to 13 (16) mm - (max. thrust rods-ø 18 mm) 1,5 KW max. 300 N (infinitely adjustable) 0 to 300 mm/s (adjustable) max. 600 mm/s 180 (e.g. 90 bars, Ø2 mm) max. 420 mm mm x mm x 420 mm approx. 550 kg approx. 22 s 50 L (Viscosity: 100 cst at +40 C) 3 x 400 V / 50 Hz 24 V DC min 0,6 MPA max 1 MPa approx. 3 liter per loading approx. 0,3 liter per double stroke of the bezel max. 48 ±5 dba (during the bar changing) 3 - CITIZEN K 16 VIP

4 EQUIPMENT Standard machine equipment Collet holder for main spindle (F20) Drive unit for synchronously driven guide bush Synchronously driven guide bush (pressurized air) Drive unit for transversely driven spindle on linear carrier Sub-spindle Collet holder for sub-spindle (F20) Ejector device Workpiece acceptance device (chute) Coolant fluid tank Centralised lubrication Door lock Electrical grounding of the machine Pneumatic unit for air seal Ejector for workpieces with through-hole Workpiece container Oil-cooled main spindle 4-slot drill holder (20 mm shank) 4-slot drill holder for back machining (20 mm shank) Control FANUC 31i - TA SOFT 1 SOFT 2 SOFT 3 SOFT 4 SOFT 5 SOFT 7 SOFT 8B SOFT 11 SOFT 13 Cutter radius compensation Multiple repetition of cycles Deep drilling Constant cutting speed Insert chamfers and radii User macro Storage capacity 40m / 16k Spindle speed monitoring Main and sub-spindle synchronization 4 - CITIZEN K 16 VIP

5 SOFT 18 SOFT 20 SOFT 22 SOFT 23 SOFT 31 SOFT 32 SOFT 33 Thread cutting cycle Main spindle C axis Sub-spindle 1 indexing Main spindle 1 indexing Main spindle synchr. screw thread Sub-spindle synchr. screw thread Driven tool, synchr. screw thread Standard tool holder 5 turning tool holders Transverse driven spindle (ER11) Three-phase isolation transformer 8 kva Type Internal working light Guide tube for long workpieces Spindle nut for long workpieces Long pieces for type VI Bar loader FMB minimag C Conversion D16 FMB 3200 B/C Adapter set K1216 FMB Telescopic cylinder D18 FMB minimag/turbo 2-18 Telescopic tube set D16 minimag/turbo x material guiding D10,0 FMB minimag from 8,0 mm to 9,0 mm 2x material guiding D12,0 FMB minimag from 10,0 mm to 11,0 mm 2x material guiding D13,0 FMB minimag from 11,0 mm to 12,0 mm 2x material guiding D17,0 FMB minimag from 14,0 mm to 16,0 mm Clamping sleeve SHK D 10/0,0 FMB minimag/mini turbo/turbo 2-16/3-26 Clamping sleeve SHK D 12/10 FMB minimag/mini turbo/turbo 3-26 Clamping sleeve SHK D 15/12,0 FMB minimag/mini turbo/turbo 3-26 Clamping sleeve SHK D 16/14,0 FMB Clamping sleeve SHK D 16/14,5 FMB Extended material support 380 mm FMB minimag, 380 mm, CITIZEN K 16 VIP

6 2x pressure collets 138E round, d=20/8,0 Dangling row 100, D=28 mm, L=67 mm, cone = 16 degrees (F 20-87) 2x pressure collets 138E round, d=20/10,0 Dangling row 100, D=28 mm, L=67 mm, cone = 16 degrees (F 20-87) Guide bush dangling F 605 d=8,0 adjustable with carbide insert d=24 mm, D=29,5 mm, thread G M 14x1, L=61 mm, cone 30, Guide bush dangling F 605 d=10,0 adjustable with carbide insert d=24 mm, D=29,5 mm, thread G M 14x1, L=61 mm, cone 30, x pressure collets 138E round, d=20/12,0 Dangling row 100, D=28 mm, L=67 mm, cone = 16 degrees (F 20-87) 2x pressure collets 138E round, d=20/14,0 Dangling row 100, D=28 mm, L=67 mm, cone = 16 degrees (F 20-87) 2x pressure collets 138E round, d=20/14,5 Dangling row 100, D=28 mm, L=67 mm, cone = 16 degrees (F 20-87) Guide bush dangling F 605 d=12,0 adjustable with carbide insert d=24 mm, D=29,5 mm, thread G M 14x1, L=61 mm, cone 30, 12.0 Guide bush dangling F 605 d=14,0 adjustable with carbide insert d=24 mm, D=29,5 mm, thread G M 14x1, L=61 mm, cone 30, 14.0 Guide bush dangling F 605 d=14,5 adjustable with carbide insert d=24 mm, D=29,5 mm, thread G M 14x1, L=61 mm, cone 30, 14.5 User guide / Documentation Machine parameters 6 - CITIZEN K 16 VIP

7 MACHINE PICTURES 7 - CITIZEN K 16 VIP

8 8 - CITIZEN K 16 VIP

9 9 - CITIZEN K 16 VIP

10 FLOOR PLAN Machine CITIZEN K 16 VIP 10 - CITIZEN K 16 VIP

11 Bar loader FBM minimag CITIZEN K 16 VIP

12 Thank you very much for your interest *We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.* KISTNER GmbH & Co. KG Industriestraße Thurnau