Rotron PROPIMAX 3 Tubeaxial Fans

Transcription

1 Rotron PROPIMAX Tubeaxial Fans General Tubeaxial Information Tubeaxial Fans are integrated axial flow air moving devices in which the motor rotor is cast inside the impeller to achieve the smallest possible axial dimension. Higher aerodynamic performance and efficiencies can be achieved with these true airfoil blade designs. These fans typically operate near free delivery, but can achieve static pressures above those of Propeller Fans due to high speed operations. The Tubeaxial Fan is suitable for operation in severe Rotron PROPIMAX environmental conditions in air, ground, and shipboard applications. They come in a variety of AC voltages and frequencies, as well as DC voltages. Hook up options include: lead wires, terminal blocks, or MS connectors. All Tubeaxial Fans are finely balanced to meet the requirements of MIL-B-7. All units are available with an optional internal Fan Performance Sensor (FPS) and an external Low Speed Warning Device (LSWD). Some units are available with an internal Low Speed Warning Device (LSWD). Propimax Series: Maximum Performance Curve* 7 Static Pressure (inches water gauge) RPM Airflow (cfm) *Individual Performance Curve Characteristics Available Upon Request General Materials and Finishes Physical envelope:.7 Dia. x. L. All aluminum components finished with a chemical Weight: approximately. lbs. conversion coating per MIL-C-, top coat of Die cast aluminum Venturi and Rotorprop. lusterless black enamel, color #78, per Federal Specially designed for cooling electronics in aircraft, Standard 9 conforming to TT-E-89 Type B. ground-based and shipboard applications. Corrosion-resistant stainless steel shaft and hardware. Designed for aircraft cockpit circulation, crew Impeller runs on two-high precision, double-shielded, ventilation, and mil vehicle smoke extraction stainless steel ball bearings (ABEC Class ) with an Custom mounting configurations, such as flanges or integral lubricant reservoir for a long, maintenancefree life. servo rings and synclamps, are available. Motors have stator winding insulation which is rated for continuous duty for either Class F or Class H. See specific part-number drawing for complete product dimensions Please contact the Application Engineering Department for further information Options/Accessories Synclamp Mounting Helicoil Inserts Finger Guards Terminal Block Cover - T: T: + () 9 78 T: T: F: F: + () F: F: Custom Paints Available LSWD (Low Speed Warning Device) FPS (Fan Performance Sensor)

2 AC Line Powered Units -phase and -phase permanent-split capacitor motor designs. Fixed speeds (performance) based on input frequency. Meets or exceeds the requirements of MIL-B-7 and other applicable U.S. military and commercial aerospace specifications.. Available as a QPL product (MIL-B-7 /8-) Max free delivery airflow of CFM at Hz, CFM at Hz, 8 CFM at Hz. Ambient temperature range: - C to C DC Line Powered Units E.C.D.C. Brushless permanent magnet design (Electronically Commutated DC). Speed (performance) fixed by input voltage. Meets or exceeds the requirements of MIL-B-887 and other applicable U.S. military and commercial aerospace specifications. Max free delivery airflow of 8 CFM Ambient temperature range: - C to 8 C. Acoustic levels as low as 7 dba. Acoustic levels as low as dba. Airflow, maximum ambient and acoustic levels will vary depending on design parameters Please call for further information concerning applicable U.S. military and commercial aerospace specifications Optional DC-AC Inverters and AC-AC Converters for AC Powered Models BATAC Inverter Driven Units AC square wave fans driven from a DC power source through a BATAC Inverter. Low cost alternative when multiple fans are used in a single application or area. Allows for greater than VDC input voltage. See Accessories: Power Conversion DELTAC Converter Driven Units DELTAC converters allow high frequency (typically Hz) fans to be driven by variable frequency (typically -8 Hz) power or low frequency / Hz power to obtain the higher frequency performance. Unit Description Key The unit description key is for reference only and should not be confused with a part number. While most units are custom configurations, not all variations of the key shown below are possible. Please contact the Application Engineering department for more information regarding possible custom configurations. PX L AC N 78 JH MOTOR SERIES PER ROTRON STD FAN PERFORMANCE SENSORS N- WITHOUT, S- WITH VOLTAGE TYPE AC- AC LINE OPERATED ECDC- ELECTRONICALLY COMMUTATED DC LINE OPERATED DC- DC LINE OPERATED NOMINAL DESIGN VOLTAGE SIGNIFICANT NUMBER(S) FOR OR DIGIT VOLTAGE) HOOK-UP CONFIGURATION L- LEAD WIRES, T- TERMINAL BLOCK, M- MS CONNECTOR PROPIMAX CASE BLADES Standard Servo Rings Blades B Standard Servo Rings Blades C Standard Servo Rings, Square Flange Added Blades D Standard Servo Rings, Square Flange Added Blades EXAMPLE: PXL, AC, N, 78 JH * "X" IN ANY POSITION DENOTES SPECIAL FOR THAT FEATURE R Ordering Information When ordering, please specify the specific Rotron part number listed on the following model table. Further ordering information, based on the configuration and motor series, may be obtained by contacting customer service. Please refer to the Unit Description Key explanation above. T: T: + () 9 78 T: T: F: F: + () F: F:

3 Standard Product Offering of AC Line Powered Models Part # Product Description Flow (CFM) Max Pressure (IWG) Nom. RPM Nom. Watts Line Amps (A) Max Amb (C) Weight Volts Phase Hz Capacitor Airflow Source Data Features PXT 9ZH PXM 7JH PXT JH PXBT 9JH PXBT 7DH PXBT 7JH PXBT 98XH PXBT 87JH PXBT 78WH PXBL 8WH PXBL 78ZH PXBL ZH PXBT 7JH PXBT 8ZH PXBT 8ZH PXT 97JH / A-8 TERMINALS N/A A- CONNECTOR. 8.. N/A A- TERMINALS N/A A9- TERMINALS / A8-9 TERMINALS N/A A- TERMINALS / A9-9 TERMINALS N/A A-9 TERMINALS. 7.. N/A A9- TERMINALS. 7.. N/A A9- LEADS, FPS / A7- LEADS, FPS / A- LEADS, FPS N/A A9- TERMINALS, FPS..../ A-8 TERMINALS..../ A-8A TERMINALS. 8.. N/A A- TERMINALS Standard Product Offering of DC Line Powered Models Part # Product Description Flow (CFM) Max Pressure (IWG) Nom. RPM Nom. Watts Line Amps (A) Max Amb (C) Weight Volts Airflow Source Data Features 8 PXBS 9XF A7- FPS, SQUARE FLANGE 8 PXBT SF A-B TERMINALS, FPS 97 PXBT 987SF A79-7B TERMINALS, FPS - T: T: + () 9 78 T: T: F: F: + () F: F:

4 PROPIMAX AC* PXM PXT R T: T: + () 9 78 T: T: F: F: + () F: F:

5 PXDL PROPIMAX AC & DC* PXL *Part Number Specific Drawings Available Upon Request -8 T: T: + () 9 78 T: T: F: F: + () F: F: R

6 P/N 97 PXT 9ZH A-8 P/N PXM 7JH A- AIR FLOW - liters/second at. Kg/m^ DENSITY AIR FLOW - liters/second at. Kg/m^ DENSITY AIR FLOW - CFM at.7 lbs/ft³ DENSITY AIR FLOW - CFM at.7 lbs/ft³ DENSITY P/N 97 PXT JH A- AIR FLOW - liters/second at. Kg/m^ DENSITY P/N 8 PXBT 9JH A9- AIR FLOW - liters/second at. Kg/m^ DENSITY AIR FLOW - CFM at.7 lbs/ft³ DENSITY 7 AIR FLOW - CFM at.7 lbs/ft³ DENSITY P/N 97 PXBT 7DH A8-9 P/N 97 PXBT 7JH A- AIR FLOW - liters/second at. Kg/m^ DENSITY AIR FLOW - liters/second at. Kg/m^ DENSITY AIR FLOW - CFM at.7 lbs/ft³ DENSITY 7 AIR FLOW - CFM at.7 lbs/ft³ DENSITY T: T: + () 9 78 T: T: F: F: + () F: F:

7 P/N PXBT 98XH A9-9 P/N 98 PXBT 87JH A-9 AIR FLOW - liters/second at. Kg/m^ DENSITY AIR FLOW - liters/second at. Kg/m^ DENSITY AIR FLOW - CFM at.7 lbs/ft³ DENSITY P/N 7 PXBT 78WH A9- AIR FLOW - liters/second at. Kg/m^ DENSITY AIR FLOW - CFM at.7 lbs/ft³ DENSITY P/N 87 PXBL 8WH A9- AIR FLOW - liters/second at. Kg/m^ DENSITY AIR FLOW - CFM at.7 lbs/ft³ DENSITY P/N PXBL 78ZH A7- AIR FLOW - liters/second at. Kg/m^ DENSITY AIR FLOW - CFM at.7 lbs/ft³ DENSITY P/N 7 PXBL ZH A- AIR FLOW - liters/second at. Kg/m^ DENSITY AIR FLOW - CFM at.7 lbs/ft³ DENSITY 7 AIR FLOW - CFM at.7 lbs/ft³ DENSITY - T: T: + () 9 78 T: T: F: F: + () F: F:

8 P/N 9 PXBT 7JH A9- P/N 979 PXBT 8ZH A-8 AIR FLOW - liters/second at. Kg/m^ DENSITY AIR FLOW - liters/second at. Kg/m^ DENSITY AIR FLOW - CFM at.7 lbs/ft³ DENSITY AIR FLOW - CFM at.7 lbs/ft³ DENSITY P/N 979 PXBT 8ZH A-8A AIR FLOW - liters/second at. Kg/m^ DENSITY P/N PXT 97JH A- AIR FLOW - liters/second at. Kg/m^ DENSITY AIR FLOW - CFM at.7 lbs/ft³ DENSITY AIR FLOW - CFM at.7 lbs/ft³ DENSITY P/N 8 PXBS 9XF A7- AIR FLOW - liters/second at. Kg/m^ DENSITY P/N 8 PXBT SF A-B AIR FLOW - liters/second at. Kg/m^ DENSITY CURRENT INPUT AMPS AIR FLOW - CFM at.7 lbs/ft³ DENSITY CURRENT INPUT AMPS AIR FLOW - CFM at.7 lbs/ft³ DENSITY T: T: + () 9 78 T: T: F: F: + () F: F:

9 P/N 97 PXBT 987SF A79-7B AIR FLOW - liters/second at. Kg/m^ DENSITY CURRENT INPUT AMPS.7.. AIR FLOW - CFM at.7 lbs/ft³ DENSITY - T: T: + () 9 78 T: T: F: F: + () F: F: