Heat Exchangers TUBE TO FIN, LIQUID-TO-AIR HEAT EXCHANGERS
|
|
|
- Madeleine Carson
- 6 years ago
- Views:
Transcription
1 Heat Exchangers TUBE TO FIN, LIQUID-TO-AIR HEAT EXCHANGERS ATS tube-to-fin, liquid-to-air heat exchangers are made with the industry s highest density fins to maximize heat transfer from liquid to air, allowing the liquid to be cooled to lower temperatures than other heat exchangers on the market. The heat exchanger fins and tubes are made of copper and stainless steel to be suitable for a variety of fluids, including water, dielectric fluids and custom designed heat transfer fluids. Each of the seven heat exchanger sizes is available with or without a fan. ATS heat exchangers can be used in laser cooling, medical equipment and imaging devices, compressor cooling, semiconductor processing, HVAC, food and beverage processing, and other liquid cooling applications. GENERAL FEATURES» Length: 5.8 to 21.9"» Width: 5.8 to 14"» Height: 1.8 to 2.6"» Tube diameter:.375 and.5"» Copper and tubes» Copper fins» High-efficiency and high density fin design» Silver-solder brazed joints» Internally cleaned and corrosion protected» Externally coated for corrosion protection» Can be customized for different fans» 1% pressure tested APPLICATIONS» Automotive» Aerospace» Medical» Laser cooling» Electronics Cooling» Compressor Cooling» Semiconductor Processing» HVAC For further information, please contact Advanced Thermal Solutions, Inc. at or
2 ATS-HE2 SERIES» Heat transfer capacity up to 22W per T =1 C» 5.8 x 5.8 x 1.8" core size» Weight: 177g (2.4 lbs), Weight w/fan: 1411g (3.1 lbs) ATS-HE2-C1-R NO FAN ATS-HE2-C2-R 12V 1 ATS-HE2-C3-R 12V PWM 1 ATS-HE2-C4-R 24V 1 ATS-HE2-C5-R 24V PWM 1 ATS-HE2-C6-R 48V 1 ATS-HE2-C7-R 48V PWM 1 ATS-HE21 SERIES» Heat transfer capacity up to 46W per T =1 C» 1.5 x 5.8 x 1.8" core size» Weight: 1759g (3.9 lbs)» Weight w/fan: 245g (5.3 lbs) ATS-HE21-C1-R NO FAN ATS-HE21-C2-R 12V 2 ATS-HE21-C3-R 12V PWM 2 ATS-HE21-C4-R 24V 2 ATS-HE21-C5-R 24V PWM 2 ATS-HE21-C6-R 48V 2 ATS-HE21-C7-R 48V PWM 2
3 ATS-HE22 SERIES» Heat transfer capacity up to 64W per T =1 C» 9.5 x 9. x 2.5" core size» Weight: 2211g (4.9 lbs)» Weight w/fan: 2854g (6.23 lbs) ATS-HE22-C1-R NO FAN ATS-HE22-C2-R 12V 1 ATS-HE22-C3-R 12V PWM 1 ATS-HE22-C4-R 24V 1 ATS-HE22-C5-R 24V PWM 1 ATS-HE22-C6-R 48V 1 ATS-HE22-C7-R 48V PWM 1 ATS-HE23 SERIES» Heat transfer capacity up to 117W per T =1 C» 17.5 x 9. x 2.5" core size» Weight: 7g (15.4 lbs)» Weight w/fan: 76g (16.8 lbs) ATS-HE23-C1-R NO FAN ATS-HE23-C2-R 12V 2 ATS-HE23-C3-R 12V PWM 2 ATS-HE23-C4-R 24V 2 ATS-HE23-C5-R 24V PWM 2 ATS-HE23-C6-R 48V 2 ATS-HE23-C7-R 48V PWM 2
4 ATS-HE24 SERIES» Heat transfer capacity up to 97W per T =1 C» 11.5 x 12. x 2.1" core size» Weight: 418g (8.9 lbs)» Weight w/fan: 5791g (12.8 lbs) ATS-HE24-C1-R NO FAN ATS-HE24-C2-R 12V 1 ATS-HE24-C3-R 12V PWM 1 ATS-HE24-C4-R 24V 1 ATS-HE24-C5-R 24V PWM 1 ATS-HE24-C6-R 48V 1 ATS-HE24-C7-R 48V PWM 1 ATS-HE25 SERIES» Heat transfer capacity up to 177W per T =1 C» x 12. x 2.1" core size» Weight: 7422g (16.4 lbs)» Weight w/fan: 1112g (24.23 lbs) ATS-HE25-C1-R NO FAN ATS-HE25-C2-R 12V 2 ATS-HE25-C3-R 12V PWM 2 ATS-HE25-C4-R 24V 2 ATS-HE25-C5-R 24V PWM 2 ATS-HE25-C6-R 48V 2 ATS-HE25-C7-R 48V PWM 2
5 ATS-HE26 SERIES» Heat transfer capacity up to 97W per T =1 C» 11.5 x 12. x 2.1" core size» Weight: 418g (8.9 lbs)» Weight w/fan: 5791g (12.8 lbs) ATS-HE26-C1-R NO FAN ATS-HE26-C2-R 12V 4 ATS-HE26-C3-R 12V PWM 4 ATS-HE26-C4-R 24V 4 ATS-HE26-C5-R 24V PWM 4 ATS-HE26-C6-R 48V 4 ATS-HE26-C7-R 48V PWM 4 ADDITIONAL COMPONENTS DEPLOYED IN LIQUID COOLING LOOPS Flow Meter Leak Detector Cold Plates Chillers Heat Exchangers ATS has the products needed to design a complete liquid cooling loop: Cold Plates to transfer and remove the heat from the source, Heat Exchangers to transfer heat from the liquid to the air with or without a fan, and Chillers to circulate and condition the fluid in the system. In addition, ATS offers Flow Meters to instantaneously measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system.
6 Heat Exchangers (cont d) Air Flow Through Heat Exchanger (CMH) Pressure Drop (inch w.c.) ATS-HE-26 ATS-HE-25 ATS-HE-24 ATS-HE-23 ATS-HE-22 ATS-HE-21 ATS-HE Pressure Drop (Pa) Air Flow Through Heat Exchanger (CFM) 25 Pressure Drop vs Water Flow Water Flow Through Heat Exchanger (LPM) ATS Heat Exchangfer Family Performance Water & Air (Standard Fans) Pressure Drop (PSI) ATS-HE-26 ATS-HE-25 ATS-HE-24 ATS-HE-23 ATS-HE-22 ATS-HE-21 ATS-HE Pressure Drop (kpa) Watts / ºC ATS-HE-26 ATS-HE-25 ATS-HE-24 ATS-HE-23 ATS-HE-22 ATS-HE-21 ATS-HE Water Flow Through Heat Exchanger (GPM) Water Flow (GPM) Note: Performance curves are per T = 1 C T = inlet liquid temperature - inlet air temperature
years of experience in induction technology celebrating Customized Induction Heating Systems Patented Technology
Norax Canada celebrating years of experience in induction technology Customized Induction Heating Systems Patented Technology Designed for Best Performance Enhanced Efficiency www.noraxinduction.com Norax
Options & Accessories
75 mm (2.95-inch) BLDC Motor with Integrated Sensorless Digital Drive Allied Motion s Gen III EnduraMax 75s series motors are 75 mm (2.95 in) diameter brushless DC motors that incorporate integrated drive
Options & Accessories
75 mm (2.95-inch) BLDC Motor with Integrated Sensorless Digital Drive Allied Motion s Gen III EnduraMax 75s series motors are 75 mm (2.95 in) diameter brushless DC motors that incorporate integrated drive
COMPACT Diode Laser System (Water-Cooled)
COMPACT Diode Laser System (Water-Cooled) Easy-to-integrate CW system consists of a compact 19 (11HU including water-air-chiller), rack-mountable chassis and metal-armored fiber. Can be combined with DILAS
Compressors, Chillers & Condensers
MARINE CONDENSER ACME MHX MARINE CONDENSER ACME Type MHX condensers are manufactured with the latest technology marine condenser tubing to provide compact size and cost effective use. STANDARD DESIGNS
AL30 Operator Manual
AL30 Operator Manual Pictured AL30 Air Cool Access Laser Company 917 134 th St SW, Suite A1 Everett, WA 98204 425.582.8674 www.accesslaser.com AL30 Series Operator Manual_Rev_I.Docx Section TABLE OF CONTENTS
aurotherm VFK 990 solar collectors Affordable Solar Hot Water
aurotherm VFK 990 solar collectors Affordable Solar Hot Water 96 TRANSMISSION Works well in limited sunshine COPPER ABSORBER Provides excellent thermal conductivity WEIGHS ONLY 94 POUNDS Ensures easy on-roof
SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Evaporator E2 Series. Innovative Refrigeration Solutions. Medium & Low Temperature Models. Issue: 05/14
Evaporator E2 Series Medium & Low Temperature Models Innovative Refrigeration Solutions Issue: 05/14 APPLICATION BENEFITS / FEATURES HIGH EFFICIENCY HEAT EXCHANGER COIL Capacity steps in the range are
Water Circulation Pumps & Circulators PERFORMANCE CURVES. CI Pumps. FI Pumps. Taco Curve Book B
Water Circulation Pumps & Circulators PERFORMANCE CURVES FI Pumps CI Pumps Taco Curve Book 300-2.5B Effective April 27, 2017 (Supersedes March 31, 2012 CAPACITY IN LITERS/SEC FLOW IN GALLONS PER MINUTE
Essex County College - West Essex Campus Addition And Renovations dlb # / SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART I - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Hitachi Kokusai Electric Comark LLC TRANSMITTER DESIGNED FOR REPACK
Hitachi Kokusai Electric Comark LLC TRANSMITTER DESIGNED FOR REPACK SOLID STATE. BROADBAND. AFFORDABLE. THE FUTURE HAS ARRIVED. With rapid changes in solid state RF device technologies and design techniques,
Hardware Installation Manual
Hardware Installation Manual Modular Silicon Expansion Valve (MSEV) High Capacity Modular Silicon Expansion Valve (HC-MSEV) Universal SuperHeat Controller/Sensor (USHX) Revision 1.5 DunAn Microstaq, Inc.
Brazing Technical Bulletin
No. T-13 Brazing Technical Bulletin Improvement of Joint Quality and Reduction of Flux Usage with Ag Based Handy One Products Lucas-Milhaupt, Inc. 5656 S. Pennsylvania Ave Cudahy, WI 53110 Phone: 414.769.6000
NEW PRODUCT INFORMATION
NEW PRODUCT INFORMATION Centrifugal Fan P SANYO DENKI EUROPE SA. is pleased to introduce its new San Ace C221 9TP type DC Centrifugal fan measuring 221mm diameter by 71mm thick. This product has been designed
IX. FLARED JOINTS IX. FLARED JOINTS
IX. FLARED JOINTS IX. FLARED JOINTS While copper tube is usually joined by soldering or brazing, there are times when a mechanical joint may be required or preferred. Flared fittings (Figures 28 and 29)
VELO Thermal Control System
VELO Thermal Control System Discussion on VTCS integration in the LHCb cavern NIKHEF 13 december 2004 Bart Verlaat & Luc Van Diepen NIKHEF Engineering department System Overview 6-12 C Water Primary System
Effective Design of Small-Diameter Copper Tube-Fin Heat Exchangers May 24 th, 2017
O p t i m i z e t o E x c e e d Effective Design of Small-Diameter Copper Tube-Fin Heat Exchangers May 24 th, 2017 Dennis Nasuta & Daniel Bacellar 7040 Virginia Manor Road, Beltsville MD 20705 Tel: +1
Design of a System to Control the Noise of Dry Fluid Coolers
International Journal of Advanced Mechanical Engineering. ISSN 2250-3234 Volume 4, Number 7 (2014), pp. 839-848 Research India Publications http://www.ripublication.com Design of a System to Control the
Quick-Drain Installation Requirements Large Volume Drainage Models
Quick-Drain Installation Requirements Large Volume Drainage Models Installation of the Quick-Drain-QFLV and Quick-Drain-HFLV Fluid Management Systems is a straightforward process. These installation instructions
WATER METERS M SERIES WATER METERS INSTALLATION, OPERATION AND MAINTENANCE GUIDE METAL M SERIES WATER METER PLASTIC M SERIES WATER METER
WATER METERS M SERIES WATER METERS INSTALLATION, OPERATION AND MAINTENANCE GUIDE METAL M SERIES WATER METER PLASTIC M SERIES WATER METER INTRODUCTION M SERIES WATER METERS INDUSTRY S SMALLEST WATER METERS
Introduction INTRODUCTION DISCOVER THE NEXT GENERATION IN EDGE WELDED METAL BELLOWS
2 INTRODUCTION Introduction DISCOVER THE NEXT GENERATION IN EDGE WELDED METAL BELLOWS BellowsTech, an MW Industries company, is a premier US manufacturer of high quality, dependable edge welded bellows
Quick-Drain Installation Requirements
Quick-Drain Installation Requirements Installation of the Quick-Drain-QF and Quick-Drain-HF Fluid Management Systems is a straightforward process. These installation instructions are written in a general
Application Alley. Sensors - Laser Welding and Stainless Steel Fabrication. Why Standex-Meder Laser Welding and Stainless Steel Fabrication?
Sensors - Laser Welding and Stainless Steel Fabrication Why Standex-Meder Laser Welding and Stainless Steel Fabrication? PARTNER SOLVE DELIVER At Standex-Meder Electronics, customer-specific product development
SPLIT DUCTED UNIT TECHNICAL SELECTION DATA SRA141C / SRA140E SPECIFICATION SUMMARY UNIT FEATURES CONTROL FEATURES CONTROL OPTIONS. PLENUMS (Optional)
TECHNICAL SELECTION DATA SPLIT DUCTED UNIT 1 SINGLE PHASE SCROLL SINGLE STAGE SS M SOFT START CENTRIFUGAL LOUVRE AXIAL UNIT FEATURES Scroll Compressor Multiple Speed Outdoor Fans Single Phase Soft Starter
PLA171PTR. Single-Pole, Normally Open OptoMOS Relay INTEGRATED CIRCUITS DIVISION
Single-Pole, Normally Open OptoMOS Relay Parameter Rating Units Load Voltage 8 V P Load Current ma rms / ma DC On-Resistance (max) Input Control Current 2 ma Features 7mm Separation of Output Pins 8V P
Poh Seng (PS) Lee, PhD Associate Professor Micro Thermal Systems (MTS) Group Department of Mechanical Engineering National University of Singapore
Poh Seng (PS) Lee, PhD Associate Professor Micro Thermal Systems (MTS) Group Department of Mechanical Engineering National University of Singapore Email: pohseng@nus.edu.sg Website: http://serve.me.nus.edu.sg/mts/
Type F-20-3A Sanitary Pressure Transmitter NEMA 4X with Integral Junction Box
Type F-20-3A Sanitary Pressure Transmitter NEMA 4X with Integral Junction Box Applications Food and beverage industry Pharmaceutical industry Biotechnology industry Cosmetic industry Special Features Meets
3-Way Ball Valves. Overview. Applications. Features & Benefits. Datasheet
3-Way Ball s Datasheet Overview 3-way Ball s are coupled with DA-Series Actuators to provide three-way mixing or diverting flow control. The ball valves are 1/4-turn rotary control valves and are available
OPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech
Chapter 33: Other Welding Processes, Brazing and Soldering
Chapter 33: Other Welding Processes, Brazing and Soldering 33.1 Introduction 33.2 Other Welding and Cutting Processes Electroslag Welding FIGURE 33-1 (a) Arrangement of equipment and workpieces for making
ADDENDUM NO. 4 November 15, Page 1
ADDENDUM NO. 4 November 15, 201 8 Page 1 PROJECT MANUAL FOR CONSTRUCTION OF HVAC REPLACEMENT FOR NORTH OCONEE HIGH SCHOOL FOR OCONEE COUNTY SCHOOLS WATKINSVILLE, GEORGIA DATED: SEPTEMBER 14, 2018 CUNNINGHAM,
13acd MERIT SERIES R 22 A I R C O N D I T I O N E R S. SEER up to to 5 Tons Cooling Capacity 17,500 to 60,000 Btuh
E N G I N E E R I N G D A T A A I R C O N D I T I O N E R S 13acd MERIT SERIES R 22 Bulletin No. 210423 April 2008 Supersedes January 2008 SEER up to 14.0 1.5 to 5 Tons Cooling Capacity 17,500 to 60,000
DOLPHIN SHELL & TUBE MARINE CONDENSERS (DSTMC)
PIOEER I HEAT TRASFER TECHOLOGY DOLPHI SHELL & TUBE MARIE CODESERS (DSTMC) Dolphin Shell & Tube Marine Condenser (DSTMC) General Information Dolphin carries out Thermal Design, Mechanical Design & detailed
DUK COMPACT ULTRASONIC FLOWMETER
DUK COMPACT ULTRASONIC FLOWMETER Flow Pressure Level Temperature Measurement Monitoring Control Measuring Ranges: 0.0- GPM to 0.6-60 GPM Accuracy: ±. % of F.S. Turndown Ratio: 0: P max : 30 PSI; T max
OPTIFLUX 1000 Technical Datasheet
OPTIFLUX 1000 Technical Datasheet Electromagnetic flow sensor in sandwich design Lightweight and compact Excellent price performance ratio Quick and easy to install The documentation is only complete when
ED701 General Industry Pressure Transmitter
ED701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
Optimizing Microwave Signal Transmissions In Extreme Cryogenic Environments Times Microwave Systems SiO2 Products
Optimizing Microwave Signal Transmissions In Extreme Cryogenic Environments Times Microwave Systems Products Martin Winkler Product Manager Times Microwave Systems 358 Hall Avenue Wallingford, CT 06492
Hyperboloid Contacts for High Performance Connectors
Hyperboloid Contacts for High Performance Connectors ICS SERIES Technology Company, Inc. integramate Hyperboloid Contacts QA Technology integramate Contacts are high quality, high reliability hyperboloid
PowerAmp Design. PowerAmp Design PAD01 COMPACT POWER OP AMP
PowerAmp Design COMPACT POWER OP AMP Rev C KEY FEATURES LOW COST HIGH VOLTAGE 00 VOLTS HIGH OUTPUURRENT 5A 30 WATT DISSIPATION CAPABILITY 50 WATT OUTPUAPABILITY SMALL FOOTPRINT 30mm SQUARE RoHS COMPLIANT
Model FM350 FM Broadcast Pallet Amplifier
Model FM350 FM Broadcast Pallet Amplifier Designed for FM radio transmitters, this amplifier incorporates the latest technology from ST Microelectronics. (Formerly known as SGS Thompson). 86 110MHz 48
IAB110PTR. Integrated Telecom Circuits INTEGRATED CIRCUITS DIVISION
IAB11P Integrated Telecom Circuits Parameter Rating Units Blocking Voltage 3 V P Load Current 1 ma rms / ma DC On-Resistance (max 3 Features 37V rms Input/Output Isolation Three Functions in One Package
Micro Precision Apertures
National Aperture, Inc. Micro Precision Apertures Product Guide Precision apertures, targets and patterns, including round, slit, square, etc., for universal and high power applications National Aperture,
WATERFLUX 3000 Quick Start
WATERFLUX 3000 Quick Start Electromagnetic flow sensor The documentation is only complete when used in combination with the relevant documentation for the signal converter. KROHNE CONTENTS WATERFLUX 3000
IAA110P. Integrated Telecom Circuits INTEGRATED CIRCUITS DIVISION
IAA11P Integrated Telecom Circuits Parameter Rating Units Blocking Voltage 3 V P Load Current 1 ma rms / ma DC On-Resistance (max 3 Features 37V rms Input/Output Isolation Three Functions in One Package
CPC1017NTR. 60V Normally-Open Single-Pole 4-Pin SOP OptoMOS Relay INTEGRATED CIRCUITS DIVISION. Description
CPC117N 6V Normally-Open Single-Pole 4-Pin SOP OptoMOS Relay Parameter Rating Units Blocking Voltage 6 V P Load Current 1 ma rms / ma DC On-Resistance (max) 16 LED Current to operate 1 ma Features Designed
IAD110PTR. Integrated Telecom Circuits INTEGRATED CIRCUITS DIVISION
IAD11P Integrated Telecom Circuits Parameter Rating Units Blocking Voltage 3 V P Load Current 1 ma rms / ma DC On-Resistance (max 3 Features 37V rms Input/Output Isolation Bidirectional Current Sensing
A cost effective, compact and reliable PWM drive for 1/4 through 1 HP DC applications
A cost effective, compact and reliable PWM drive for 1/4 through 1 HP DC applications The Micro 100 Drives have been designed with a Pulse Width Modulated (PWM) regulator to produce clean DC current to
Pulse Niru Company. General Catalogue.
Pulse Niru Company General Catalogue www.pulseniru.com Pulse Niru Company initiated its activities since 2003 in manufacturing Pulsed Power equipment such as High Energy Pulse Discharge Capacitors for
Svetlana 3CX3000F7/8162 High-Mu Power Triode
High-Mu Power Triode T he Svetlana 3CX3F7/8162 is a high-performance ceramic/metal power triode designed for use in zero-bias, class AB, or class B RF or audio amplifiers. A modern mesh filament is used,
CPC1019NTR. 60V Normally-Open Single-Pole 4-Pin SOP OptoMOS Relay INTEGRATED CIRCUITS DIVISION. Description. Features
CPC119N 6V Normally-Open Single-Pole 4-Pin SOP OptoMOS Relay Parameter Rating Units Blocking Voltage 6 V P Load Current 7 ma Load Current, Peak AC 1 A On-Resistance (max).6 LED Current to operate 2 ma
4X150A/7034 Radial Beam Power Tetrode
4X15A/734 Radial Beam Power Tetrode T The Svetlana 4X15A/734 is a compact radial beam tetrode. The 4X15A is intended for Class AB SSB linear RF amplifier service. It is intended for stationary and mobile
Firestar vi30/40 Dual Cooled Laser Quick Start Guide
Important See the Firestar vi30/40 Operators Manual for complete installation details and instructions. A PDF version is available online at: http://www.synrad.com/synrad/docroot/resources/libraries/manuals.
Sight glass window Sight flow indicator
SIGHT GLASS Sight glass components allow operators to safely observe processes inside tanks, pipes, reactors and vessels. When it comes to selecting a sight glass, a wide variety of factors should be considered
92 38 mm. Reversible Flow Fan. 9RF type. Features. Common Specifications. Specifications. Reduces the required number of fans
Reversible Flow Fan 9RF type Features Reduces the required number of fans Wind direction of the fan can be switched so fewer fans are required. It therefore contributes to reducing equipment costs and
Determining the Dynamic Characteristics of a Process
Exercise 1-1 Determining the Dynamic Characteristics of a Process EXERCISE OBJECTIVE Familiarize yourself with three methods to determine the dynamic characteristics of a process. DISCUSSION OUTLINE The
Level Measurement. Continuous level measurement - Capacitance transmitters SITRANS LC300 5/271. Overview. Configuration
Siemens G 200 Overview onfiguration Installation uild up of material in active shield area does not affect switch operation. Mounting on a bypass is an inverse frequency shift capacitance continuous level
OPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech
2-Way Proportional Logic Cartridge Valve Model FE.. (Series 1X and 2X) PSI (315 bar) F with electrical connection 12 X Y
RA 9 /6.98 -Way Proportional Logic Cartridge Valve Model FE.. (Series X and X) Size 6... 6... 6 PSI (5 bar)... 75 GPM (8 L/min) RA 9 /6.98 Replaces: 5.9 Characteristics: Single land throttle valve (main
Ken Stead Global New Product Development Mgr
Power Connectors Rate Rate, don t de-rate Ken Stead Global New Product Development Mgr Molex Power Products Agenda Focus is mainly DC power Current Rating Changes in the Market Power Integrity Engineering
A Practical Update on Advanced Copper Alloys and On-Site Joining Methods for HVACR Systems. Educate Promote Defend Support Inspire
A Practical Update on Advanced Copper Alloys and On-Site Joining Methods for HVACR Systems A Practical Update on Advanced Copper Alloys and On-site Joining Methods for HVACR Systems Presented by: John
CPC1017N. Single-Pole, Normally Open 4-Lead SOP OptoMOS Relay INTEGRATED CIRCUITS DIVISION. Description
CPC117N Single-Pole, Normally Open 4-Lead SOP OptoMOS Relay Parameter Rating Units Blocking Voltage 6 V P Load Current 1 ma rms / ma DC On-Resistance (max) 16 LED Current to operate 1 ma Features Designed
SO-LOW LAB FREEZERS TO -85 C
WWW.SO-LOW.COM E-MAIL: SALES@SO-LOW.COM SO-LOW LAB FREEZERS TO -85 C RESEARCH - TESTING CLINICAL APPLICATIONS PHARMACY FREEZERS LIFE SCIENCES INDUSTRIAL USE ENVIRONMENTAL EQUIPMENT CO., INC. 10310 Spartan
CPC1117NTR. 60V Normally-Closed Single-Pole 4-Pin SOP OptoMOS Relay INTEGRATED CIRCUITS DIVISION
6V Normally-Closed Single-Pole 4-Pin SOP OptoMOS Relay Parameter Rating Units Blocking Voltage 6 V P Load Current 1 ma rms / ma DC On-Resistance (max) 16 LED Current to Operate 1 ma Features Designed for
Heating / Air Conditioning Pulsar Radiant Panel ENVIRONMENTAL COMFORT
Heating / Air Conditioning Radiant Panel ISO 9001 Cert. n 0545/4 Unit heaters Radiant panels Fan coils Air handling units Flues ENVIRONMENTAL COMFORT H e a t i n g Air Conditioning ENVIRONMENTAL COMFORT
New Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
PhD Inline Vortex. Performance Specifications Accuracy. Operating Specifications
Description The Vortex PhD vortex shedding flowmeter measures process fluid flow by detecting the frequency at which vortices are shed from an obstruction in the process fluid line (the bluff body). A
CPC1967 INTEGRATED CIRCUITS DIVISION. 400V Single-Pole, Normally Open Power Relay. Description. Characteristics. Features.
Characteristics Parameter Rating Units Blocking Voltage 4 V P Load Current, T A = C: With C/W Heat Sink 3.3 No Heat Sink 1.3 Features 3.3A rms Load Current with C/W Heat Sink Low.8 On-Resistance 4V P Blocking
LPX SERIES Constant Potential Portable X-Ray
LPX SERIES Constant Potential Portable X-Ray Specifications Equipment: Input line Requirements: Anode Cooling: X-Ray Tubehead - Constant potential, end-grounded anode, air or liquid cooled versions available
Rotron PROPIMAX 3 Tubeaxial Fans
Rotron PROPIMAX Tubeaxial Fans General Tubeaxial Information Tubeaxial Fans are integrated axial flow air moving devices in which the motor rotor is cast inside the impeller to achieve the smallest possible
WATERFLUX 3000 Quick Start
WATERFLUX 3000 Quick Start Electromagnetic flowmeter The documentation is only complete when used in combination with the relevant documentation for the signal converter. KROHNE CONTENTS WATERFLUX 3000
CPC1927 INTEGRATED CIRCUITS DIVISION. 250V Single-Pole, Normally Open Power Relay. Characteristics. Description. Features.
Characteristics Parameter Rating Units Blocking Voltage 2 V P Load Current, T A =2 C: With C/W Heat Sink 6.7 No Heat Sink 2.7 Features 6.7A rms Load Current with C/W Heat Sink Low.2 On-Resistance 2V P
NDT KONFERANSEN ZENOVIEA VOROSCIUC
NDT KONFERANSEN 2011 ZENOVIEA VOROSCIUC Short about FMC Expectations Requirements New Challenges. New Solutions. 2 FMC Technologies Subsea Eastern ~ 150% growth from 2004-2010 MUSD Revenue Employees ER
USER MANUAL MODEL USFT-CS ULTRASONIC FLOW TRANSMITTER. Rev04009 USER MANUAL DEI MODEL USFT-CS
Rev04009 USER MANUAL DEI MODEL USFT-CS USER MANUAL MODEL USFT-CS ULTRASONIC FLOW TRANSMITTER The Model USFT-CS is an ultrasonic transit time flow meter designed to accurately and reliably report the flow
Cu 0.37 Brass Cu 0.37 Brass
To: From: EDGES MEMO #148 MASSACHUSETTS INSTITUTE OF TECHNOLOGY HAYSTACK OBSERVATORY WESTFORD, MASSACHUSETTS 01886 October 7, 2014 Telephone: 781-981-5400 Fax: 781-981-0590 EDGES Group Alan E.E. Rogers
CPC1979J. ISOPLUS -264 Power Relay INTEGRATED CIRCUITS DIVISION. Description. Characteristics. Features. Applications. Ordering Information.
ISOPLUS -264 Power Relay INTEGRATED CIRCUITS DIVISION Characteristics Parameter Rating Units Blocking Voltage 6 V P Load Current =2 C: With C/W Heat Sink 3. No Heat Sink 1.4 A rms / A DC On-Resistance
Casing while Drilling. Advanced Casing Deployment Drillable Casing Technology
Casing while Drilling Advanced Casing Deployment Drillable Casing Technology Why should operators use our Advanced Casing Deployment tools? Well designs that are at the technical limit based on torque
CPC1114NTR. 60V Normally-Closed Single-Pole 4-Pin SOP OptoMOS Relay INTEGRATED CIRCUITS DIVISION
6V Normally-Closed Single-Pole 4-Pin SOP OptoMOS Relay Parameter Rating Units Blocking Voltage 6 V P Load Current 4 ma rms / ma DC Max On-Resistance 2 LED Current to Operate 2 ma Features V rms Input/Output
Series T. General Eastern Differential Pressure Transmitters. GE Sensing. Description
Description The Series T family of differential pressure transmitters measure low pressures and feature low power consumption and a variety of analog signal outputs. A wide selection of standard pressure
CPC1788 INTEGRATED CIRCUITS DIVISION. 1000V Single-Pole, Normally Open DC-Only Power Relay. Characteristics. Description. Features.
Characteristics Parameter Rating Units Blocking Voltage 1 V P Load Current, T A = C: With C/W Heat Sink.4 No Heat Sink 1 Features.4A DC Load Current with C/W Heat Sink Low 1. On-Resistance 1V P Blocking
CPC1968 INTEGRATED CIRCUITS DIVISION. 500V Single-Pole, Normally Open Power Relay. Description. Characteristics. Features.
Characteristics Parameter Rating Units Blocking Voltage V P Load Current, T A = C: With C/W Heat Sink No Heat Sink Features A Load Current with C/W Heat Sink Low.3 On-Resistance V P Blocking Voltage V
Precision Thermistor Sensors
Precision Thermistor Sensors For Laboratory Applications ON-400 Series U For Use in Laboratory or Other High-Accuracy Applications U Rugged Construction Can Be Used for Short Term Water and Soil Readings
Edgewound Resistors Hardware Reference
Document 1101023 - Edition June 0 Table of Contents 1 General Description...3 2 Product Selection Guide...4 3 TOFIL and BC Series 3.1 General Description... 3.2 Electrical and Thermal Specifications 3.2.1
Metal tube variable area flowmeters for gases, liquids and steam
Metal tube variable area flowmeters for gases, liquids and steam Metallic with a robust construction, optional in plastic Indication by means of magnetic coupling Linear scales, calibrated in l/h, m3/h,
ATLAS Phase 1 Upgrade: Muons. Starting Point: Conceptional drawing from Jörg: GRK Ulrich Landgraf
Starting Point: Conceptional drawing from Jörg: GRK2044 1 Overview Reasons for phase 1 upgrade Structure of New Small Wheel (NSW) Cooling system of NSW electronics Alignment system of NSW Micromegas operation:
CPC1727. Single-Pole, Normally Open ISOPLUS -264 DC Power Relay INTEGRATED CIRCUITS DIVISION. Description. Characteristics. Features.
Characteristics Parameter Rating Units Blocking Voltage V P Load Current = C: With C/W Heat Sink 8.6 No Heat Sink 3.4 A DC On-Resistance (max.9 R JC.3 C/W Features 8.6A DC Load Current with C/W Heat Sink
CPC1016NTR. Single-Pole, Normally Open 4-Lead SOP OptoMOS Relay INTEGRATED CIRCUITS DIVISION. Description. Features. Approvals.
CPC116N Single-Pole, Normally Open 4-Lead SOP OptoMOS Relay Parameter Rating Units Blocking Voltage 1 V P Load Current 1 ma rms / ma DC On-Resistance (max) 16 Features V rms Input/Output Isolation 1% Solid
Commercial Refrigeration Price List
Commercial Refrigeration Price List KPL3_004_073118 Effective Date: August 1, 2018 Krack Commercial Refrigeration Price Lists are updated quarterly; January, April, July and October; and posted on our
CPC V Single-Pole, Normally Open DC-Only Power Relay
Characteristics Parameter Rating Units Blocking Voltage 6 V P Load Current, T A = C: With C/W Heat Sink 11.8 No Heat Sink 4 Features 11.8A DC Load Current with C/W Heat Sink Low.8 On-Resistance 6V P Blocking
CPC1918 INTEGRATED CIRCUITS DIVISION. 100V Single-Pole, Normally Open Power Relay. Characteristics. Description. Features.
Characteristics Parameter Rating Units Blocking Voltage 1 V P Load Current, T A = C: With C/W Heat Sink 13 No Heat Sink. Features 13A rms Load Current with C/W Heat Sink Low.1 On-Resistance 1V P Blocking
Module 4 Design for Assembly IIT BOMBAY
Module 4 Design for Assembly Lecture 8 Case Studies - IV Instructional objectives The objective of this lecture is to exhibit how real components are designed in industry following some of the principles
Thin Film Deposition
Thin Film Deposition Section Eleven 11 11.1 General Information 2 11.2 Deposition Monitors 3 11.3 Crystal Feedthroughs 4 11.4 Crystal s 5 11.5 Cables, s, Crystals & Accessories 6 Nor-Cal Products, Inc.
AWS C3.9M/C3.9:2009 An American National Standard. Specification for Resistance Brazing
An American National Standard Specification for Resistance Brazing An American National Standard Approved by the American National Standards Institute July 30, 2008 Specification for Resistance Brazing
CPC1927. Single-Pole, Normally Open ISOPLUS -264 Power Relay INTEGRATED CIRCUITS DIVISION. Description. Characteristics. Features.
Characteristics Parameter Rating Units Blocking Voltage 2 V P Load Current =2 C: With C/W Heat Sink 6.7 No Heat Sink 2.7 A rms / A DC On-Resistance (max.2 R JC.3 C/W Features 6.7A rms Load Current with
Non-Submersible Industrial Pressure Transducer
Non-Submersible Industrial Pressure Transducer KPSI Transducers Series 27, 28, 30 FEATURES Custom Pressure Ranges up to 2000 (13,790 kpa) Accuracy to ±0.10% FS Analog Outputs of 4-20 ma or VDC Welded 316
Thin Film Deposition
Thin Film Deposition Section Eleven 11 11.1 General Information 2 11.2 Deposition Monitors 3 11.3 Crystal Feedthroughs 4 11.4 s 5 11.5 Cables, s, Crystals & Accessories 6 Nor-Cal Products, Inc. 1967 South
SprayVantage Pro Series
SprayVantage Pro Series Superior, Economical Spray Finishing for Professional Painters, Contractors & Do-it-Yourselfers www.binks.com A98-145R2 02/13 Why Choose Binks? Binks pioneered the development of
Halsey Taylor Owners Manual
Halsey Taylor Owners Manual Wall Mount Steel Fountains ITALLER These series fountains are among the easiest to install Fountains on the market today. To assure you install these models easily and correctly,
CPC1727 INTEGRATED CIRCUITS DIVISION. 250V Single-Pole, Normally Open DC-Only Power Relay. Characteristics. Description. Features.
Characteristics Parameter Rating Units Blocking Voltage 2 V P Load Current, T A =2 C: With C/W Heat Sink 8.6 No Heat Sink 3.4 Features 8.6A DC Load Current with C/W Heat Sink Low.9 On-Resistance 2V P Blocking
Plumbing Part II - Hand Pump
Plumbing Part II - Hand Pump Nelson Riedel Nelson@NelsonsLocomotive.com Initial: 7/17/03 Last Revised: 06/06/2004 The hand pump located in the tender water tank is a backup pump should the axel pump fail