2-02 Start voltage The voltage that enable to start the fan by sudden switch on.

Transcription

1

2 1. MECHANICAL: 1-01 Dimension Dimension of fan shall be shown in the outline styling drawing attached Motor Four-pole motor Frame Plastic material UL 94V Impeller Plastic material UL 94V Free drop shock In minute package condition, the fan should withstand each one drop of three faces from 30cm distance height onto 10 mm thickness of wooden board. 2.ELECTRICAL: 2-01 Rated current Rated current shall be measured after 30 minutes continuous rotation at rated voltage Start voltage The voltage that enable to start the fan by sudden switch on Rated Speed Rated speed shall be measured after 30 minutes continuous rotation at rated voltage Input Power 2-05 Lock Current Insulation resistance Dielectric strength Input power shall be measured after 30 minutes continuous rotation at rated voltage. Locked current shall be measured Within one minute at rotor locked, after 30 minutes continuous rotation at rated voltage in clear air. More than 10M ohm at 500 V.D.C between lead and housing. Measured 5 ma(max) trip current at 700 V.A.C for 3 sec. between lead and housing. Locked motor Designed to meet UL, CUL and TUV. protection DO NOT use power or ground PWM to control the fan speed.if the fan speed needs to be adjusted,please contact JAMICON to customize the product design for your application Page.2

3 3.CHARACTERISTICS: Air Flow 3-01 & Static Pressure 3-02 Noise level The air flow data and static pressures should be determined in accordance with AMCA standard or DIN specification in a double- chamber testing with intake-side measurement. The measurement of noise level is carried out with reference to DIN in an echoic chamber with the microphone positioned 1 M from the air intake. Testing fan shall be hung in clean air. Microphone Test Fan 1M 4.ENVIRONMENTAL: Operating temperature Storage Temperature 4-03 Humidity 4-04 Thermal Shock -10 to 70 (ordinary humidity) -40 to 70 (ordinary humidity) After 96 hrs, 95% RH 40±2 per MIL-STD-202F method 103B, Humidity test, The measured data of insulation resistance & dielectric strength should meet the specification listed in attach. After thermal shock test per MIL-STD-202F method 107D, Condition D, The measured data of insulation resistance & dielectric strength should the specification Page.3

4 5.DATA-SHEET: MODEL JF0925B1EK00CCGJKR 5-1. SPECIFICATION: NO. ITEM SPECIFICATION UNIT CONDITION Dimension 92*92*25 mm Bearing Dual Ball Rated Voltage 12 VDC Operating Voltage 6.0~13.8 VDC MAX 13.8V Start Voltage 6.0 VDC On/off test, Duty cycle 100% 12.0 VDC Duty cycle 25% Speed 0~1700 R.P.M At rated Voltage, Duty cycle 0~100% 1700 R.P.M ±10%,At rated Voltage, No PWM Signal Input Current 0.09 Amp At rated Voltage Duty cycle 100% 0.02 Amp At rated Voltage Duty cycle 0% Input Power 1.08 Watt At rated Voltage Duty cycle 100% 0.24 Watt At rated Voltage Duty cycle 0% Nominal Current 0.10 Amp At rated Voltage, Duty cycle 100% Air Flow CFM At 0 static Pressure of rated speed Static Pressure At 0 air flow of rated inchh 2 O speed Noise 23.1 dba At rated speed Life Expectancy(L10) 85,000 Hours At 40 (Bearing) Motor protection Electronic protected Polarity protection It will not damage the fan while reverse input Auto Restart YES Speed Signal output YES(1) Alarm Signal output NO Rotation direction From the label side Clockwise Weight 85 Gram Per each piece Safety Certificate UL, CUL, TUV,CE Note1:Don t direct connect the speed /Alarm signal output to + or -. Page.4

5 5-2. LEAD WIRE: NO. ITEM SPECIFICATION AWG NO. & Authorize 26AWG, UL1061 (The end of wire with tin as drawing) Color Speed PWM Black Yellow Green Blue Line Length 285±10 mm Connector Tube NO Notes as: Pitch:2.54mm Housing:Molex compatible parts. Page.5

6 Page.6

7 Page.7

8 A IM E I D E E ***** L E C T R O N IC C O R 26AWG UL ± F G H K R T O A RY DC FA C US MODEL:JF0925B1EK-R DUAL BALL BEARING 12V 0.10A N B R U S H L S S R E P. 6 A 7 8 郝文姣 2017/04/27 DATE SCALE DWG. NO: PRODUCT REV. DESCRIPTION C APPEARANCE OF FAN JF0925B1EK00CCGJKR 凱美電機有限公司 UNIT mm Date code B PET Blue(pwm) Green(FG) Yellow(+) Black(-) Date code XX X XX Pitch:2.54mm Housing:Molex compatible parts Date Month Year Page.8

9 JF0925B1EK00CCGJKR TEST F=21-28KHz VIL 0.6V VIH=2-5.5V DUTY CYCLE Rated Voltage CURRENT (REF) SPEED (RPM) RANGE(RPM) 0% 0.02A 0 不转 100% 12V 0.09A 1700 ±10% No PWM Signal 0.09A 1700 Page.9

10 Page.10