TPHK Series. Immersible Pumps WALRUS PUMP. All specifications are subject to change without notice. 011
|
|
|
- Sabrina Cooper
- 5 years ago
- Views:
Transcription
1 Series WRUS PUMP ll specifications are subject to change without notice. Immersible Pumps
2 pplications The WRUS Series is vertical multistage centrifugal pump, designed for industrial use, specially for machine tools. It is suitable to carry fluids such as water, coolant, light oil and other clean, non aggressive matters for: - Industrial circulation system - Washing/cleaning system - Filtration system Operation conditions Sectional drawing mbient temperature :Max. + C iquid temperature range :+ C ~ + C Operating pressure :Max. kg/cm² Submerged depth :Min. mm T/T code Materials Oil Seal Pump Casing FCD Mechanical Seal HTTH HGSH Shaft Strap Impeller Intermediate chamber Sleeve earing Tungsten carbide Submersible vertical multistage centrifugal pump, self-priming, co-axial pump/motor design, impellers mounted on extended motor shaft. Main working parts made by stainless steel. Motor T - S Hz T/T Stainless steel series Q -/-V - Z* -/-V -/-V Number of Stages U* -/-V -/-V Standard capacity m³/h name Performance range P(kg/cm²) P(kg/cm²) Hz T T T T Q(m³/h) Suction intercon-nector ock Nut SUS Filter Fiange HGSH HGSV HGSE T - Special mechanical seal HTTH HTTV HTTE HSSH HSSV HSSE Material Stationary Face/ Rotary Face Cup Gasket & O Ring (G)Carbon/ (S)Silicium carbide (H) HNR (T)Tungsten Carbide/ (T)Tungsten Carbide Viton (E) EPDM (S)Silicium carbide/ (S)Silicium carbide T Hz Priming screw Mechanical seal type NR Options on request Number of Impellers * The motor can be use in both / hz. S series Hz Standard Pump construction Code PH Material NO. Part name Enclosure class : IP Insulation class : F. Nominal speed : / rpm Frequency range : / Hz Voltages Code: T T Q(m³/h)
3 T P(kg/cm) Q(m/h) T Q(m/h). Q(m/h) code ( Hz ) Z T - Z T - Z T - Z T - Z T - Z T - U Maximum Stages -.. Q(m/h) P(kW) T Hz - P(kW) - P(kg/cm) T Hz - - T - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. PF¾" Ø (mm) (mm) (mm) T - T - T - T - T - T - T - T - T - T - T- T - T - T - T - T - T - T - T- T- T
4 T P(kg/cm) T Hz P(kW). - T Q(m/h) Q(m/h) P(kW) Q(m/h) Q(m/h) code ( Hz ) Z T - Z T - Z T - U T - U T - U T - U Maximum Stages T Hz - P(kg/cm) - T - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. PF¾" Ø T T T T T T T T T T T T T T T T T T T T (mm) Hz / Hz (mm) / / (mm) Hz / Hz / /
5 T P(kg/cm) T Hz - - Q(m/h) T Hz Q(m/h) P(kW) P(kW) code ( Hz ) Z T - Z T - Q(m/h) T - T P(kg/cm) - T U U - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. Q(m/h) (mm) (mm) PF¼" T T T T T T T T (mm) Maximum Stages XØ Ø
6 T P(kg/cm) T Hz - - P(kW) - P(kg/cm) Q(m/h) T Hz - - T - Z T - U T - Maximum Stages Q Q(m/h) - - Q(m/h) code ( Hz ) P(kW) - T - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. - / -.-. /.-. Q(m/h) (mm) (mm)..... T T T T T PF¼" (mm) XØ Ø
TPHK Series. Immersible Pump
Series Immersible Pump Contents General Data Performance Range Sectional Drawing Performance Curves/Technical Data T T T T Series Immersible Pump Hz Power:. -. kw Head: Up to M Flow: Up to L/min Hz Power:.
TPHK Series. Immersible Pump
TPHK Series Immersible Pump Contents General Data Performance Range Sectional Drawing Performance Curves/Technical Data TPHK T TPHK T TPHK 8T TPHK T TPHK Series Immersible Pump Hz Power:. -.8 kw Head:
UPA 150C. 50 Hz. Applications. Submersible Borehole Pumps for Well Diameters of 150 mm (6 inches) Operating Data. Design. Designation (Example)
Type Series Booklet 3400.52/4 -- 10 Applications Suitable for handling clean or slightly contaminated water in applications such as: -- domestic water supply -- general water supply -- irrigation and spray
Lowara. Centrifugal pumps with open impeller and flanged connections. SHO Series MARKET SECTORS CIVIL, INDUSTRIAL.
Centrifugal pumps with open impeller and flanged connections SHO Series MARKET SECTORS CIVIL, INDUSTRIAL. APPLICATIONS Industrial washing machines. Commercial dishwashers. Washing of metal parts, surface
Series 80 In-Line Mounted Centrifugal Pumps
Bulletin B-G Bell & Gossett Series In-Line Mounted Centrifugal Pumps Applications Hydronic Heating & Cooling Systems Industrial Process General Service Pressure Boosting Advantages Close Coupled Space
UNISELB. Self-priming dirty water pump
UNISELB Self-priming dirty water pump GB 7 UNISELB benefits that ensure operational safety and cost-effectiveness in continuous operation. TABLE OF CONTENTS Non-clogging system Starting at DN, the non-clogging-system
Submittal Data Sheet Wilo MVI - Vertical Multistage Pumps
Wilo MVI Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM Hz H [ft] ηp [%] P [hp] 7 7.......7..9.......................... MVI -
LKH-110 Multi-Stage Centrifugal Pumps Sanitary version with multi voltage motor, complete unions, legs and shroud
Connections: SMS 9612-3887-01 4497 2x160 SSS 2.2 220-240D/380-420Y 9612-3887-02 4797 2x160 FSS 2.2 220-240D/380-420Y 9612-3887-03 4640 2x160 SSS 3.0 220-240D/380-420Y 9612-3887-04 4941 2x160 FSS 3.0 220-240D/380-420Y
High-efficiency Circulator Pump. Rio-Eco N / Rio-Eco Z N. Type Series Booklet
High-efficiency Circulator Pump Rio-Eco N / Rio-Eco Z N Type Series Booklet Legal information/copyright Type Series Booklet Rio-Eco N / Rio-Eco Z N All rights reserved. The contents provided herein must
Split case double suction centrifugal pump. Technical data Serie: DPAS C
Split case double suction centrifugal pump Technical data Serie: DPAS C Table of Contents 1 Introduction 1.1 Fields of Application... 1. Pumped Liquids... 1.3 Design... 1. Bearings... 1.5 Shaft Seal...
Pumping of clear unfilled liquids in housing, agricultural and industrial sectors.
operating limits Flow rates up to : 98 m 3 /h Head up to : Max. discharge pressure : Max. suction pressure : Temperature range : 25 m CE 16 et 25 bar 1 bar - 15 to +12 C* Max. ambient temperature : + 4
Service instructions. CR, CRI, CRN 10, 15 and /60 Hz 1/3~
Service instructions CR, CRI, CRN 10, 15 and 20 50/60 Hz 1/~ 1. Type identification... 2 1.1 Nameplate... 2 1.2 Type key... 1. Code for shaft seal... 4 2. Tightening torques and lubricants... 5. Service
4.2 - PUMP MAINTENANCE MODELS: AC, AS, WC, WS
4.2 - PUMP MAINTENANCE MODELS: AC, AS, WC, WS 4.2.1 - EXPLODED VIEW DRAWING REF NO. 1 2 4 QTY 3 1 1.5 5 ¾ HP HP HP HP HP DESCRIPTION PART # 1 CASE 1.25 x 1 NPT 018266 1 CASE 1.25 X 1 NPT 018268 1 CASE
FAIRBANKS NIJHUIS 1590 SERIES SINGLE STAGE VERTICAL INLINE PUMP.
FAIRBANKS NIJHUIS 0 SERIES SINGLE STAGE VERTICAL INLINE PUMP www.fairbanksnijhuis.com FAIRBANKS NIJHUIS 0 Series Single Stage Vertical Inline Pump Capacities to 00 GPM (,00 m/hr) Heads to 0 Feet ( m) Temperatures
5000 Series Single Impeller Firefighter
5000 Series Single Impeller Firefighter Pump made in Australia & fitted to genuine brand name engines SERVICING INSTRUCTIONS WARNING: ALL ELECTRICAL WORK TO BE PERFORMED BY SUITABLY QUALIFIED ELECTRICAL
420 SERIES REPAIR PARTS INDEX
SECTION 420P PAGE 1 SUPERSEDES 420P PAGE 1 420 SERIES REPAIR PARTS INDEX READ AND UNDERSTAND THE PUMP AND MOTOR INSTRUCTIONS BEFORE ATTEMPTING TO INSTALL, DISASSEMBLE OR REPAIR THE PUMP SECTION 420P PAGE
GEA VARIPUMP. GEA Hilge SIPLA. Single-stage, Self-priming Side Channel Pumps for Advanced Applications
GEA VARIPUMP GEA Hilge SIPLA Single-stage, Self-priming Side Channel Pumps for Advanced Applications Optimize Your Cleaning Processes Ensure maximum process safety with the GEA Hilge SIPLA pump series
Insertion Flow sensor for continuous flow measurement
Insertion Flow sensor for continuous flow measurement Economic integration into pipe systems 2 wire frequency coil (sinusoidal) version 3 wire frequency Hall effect (pulse) version to directly interface
Liquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design SIHI extruvac LEME 13, LEME 155 Pressure range: Suction volume flow: 1 to 113 mbar 3 to 17 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum pumps are displacement
EC/AC axial fans - HyBlade Ø
E/ axial fans - Hylade Ø 00-0 version 0/0 The engineer s choice The new "little ones": axial fans with Hylade technology. The success of our Hylade series continues: xial fans with one-of-a-kind Hylade
TECHNICAL DATA. ErP R eady NewMotorTechnolgy. FERRIER PUMPS LTD Edinburgh Glasgow Aberdeen
FERRIER PUMPS LTD Edinburgh Glasgow Aberdeen www.ferrierpumps.co.uk Electronically controlled high-efficiency pumps for heating, air conditioning, cooling and sanitary water ErP R eady NewMotorTechnolgy
EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8
EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8 KC-5 KC-8 Pump RPM 638 1022 Motor HP (kw) 0.33 (0.25) 0.50 (0.37) Oil Capacity, qts. (liters) 0.8 (0.76) Forced Drain w/ open suction, qts. (liters) 0.85 (0.80)
CENTRIFUGAL PUMPS FRAME MOUNT 13" FEATURES
FEATURES Volute: Cast iron for heavy-duty service; back pullout design; can be rotated for ease of installation; 6 x 8-13 and 8 x 10-13 are split volutes for reduction in radial bearing load Impeller:
Side. Channel Blower APEX DARGANG MACHINERY CORPORATION
Side Channel Blower APEX DARGANG MACHINERY CORPORATION Side Channel Blower Construction External bearing Cool-running Long life Motor Industrial quality /60Hz Squired-cage motor totally enclosed(ip55 )
Measuring and Controlling Unit Multronic OC
Measuring and Controlling Unit Multronic OC One channel measuring and controlling unit for ph / conductivity / Chlorine measuring Automatic temperature compensation Measuring and control behaviour simultaneously
Data Sheet for Precision Potentiometer
Electrical Data 3turn 5turn 1turn Effective electrical angle of rotation 1.) 18 ±5 18 ±5 36 ±5 Total resistance 1.) 2 Ohm..5 kohm 2 Ohm..1 kohm Resistance tolerance ±3% (±1%) Independent linearity (best
Type PLC Fitting. Valve for Continuous control. Diaphragm valve. Output
Digital Inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
400 SERIES GRINDER PUMPS 41502, 42202,43302, AND MODELS
Section: MOYNO 500 PUMPS Page: 1 of 6 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 400 SERIES GRINDER PUMPS 41502, 42202,43302, AND 44402 MODELS DESIGN FEATURES Housing: Cast iron Pump Rotor: Chrome
CENTRIFUGAL PUMPS FPE Series
OPERATING MANUAL CENTRIFUGAL PUMPS FPE Series Model : Model No.: Table of Contents Page 1. Maintenance 1 1.1. Disassembly 1 1.1.1. General 1 1.1.2. Impeller 1 1.1.3. Complete disassembly 1 1.2. Assembly
TYPE 3740 WET RUNNING CARTRIDGE SPLIT SEAL Technical Specification
A Mating Ring B Mating Ring Adapter Assy. C Sealing Element Gasket D Sealing Element Strip E Sealing Element O-ring F Set Screw G Primary Ring H Retaining Ring I Spring Adapter Assy. Set J O-ring (Split)
FAS 10 mm PICOSOL Direct acting solenoid valve
FS 0 mm PICOSOL > > /, /; Manifold mounting > > Long life 00 million cycles > > Compact Design > > Low power consumption Technical features Medium: ir, oxygen, neutral gases (0 %... 9 % humidity, non condensing),
Valve repair and testing technique
High standard in precision. Valve repair and testing technique Quality Made in Germany by GmbH & Co. KG Grinding and Lapping Machines for Industrial Valves VENTA Portable grinding and lapping machines
DTM.OCS.S/N - Modbus Level Transmitter
Digital Submersible Level Transmitter with Modbus Interface DTM.OCS.S/N - Modbus Level Transmitter CUSTOMER BENEFITS High precision digital level transmitter with standard Modbus interface Fast customization
380 SERIES REPAIR PARTS INDEX
SECTION 380P PAGE 1 SUPERSEDES 380P PAGE 1 380 SERIES REPAIR PARTS INDEX READ AND UNDERSTAND THE PUMP AND MOTOR INSTRUCTIONS BEFORE ATTEMPTING TO INSTALL, DISASSEMBLE OR REPAIR THE PUMP SECTION 380P PAGE
2-Inch Thermoplastic Dewatering Pumps Refer to pump manual for General Operating and Safety Instructions.
Specifications Information and Repair Parts Manual 3824-99, 3825-99 & 382A-99 Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting
Indexable Center Drill
i-center indexable center drill (patent pending) First Indexable center drill in the world. Shortens set up time and center drilling time. Increases tool life which reduces tooling cost. Special forms
Measuring and Controlling Unit Multronic
Measuring and Controlling Unit Multronic Modular system Up to 3 measurement variables with control functions in one housing Free combination of the measurement variables ph / Redox / temperature / conductivity
T11 - T12 - T13. Electrical contacts stainless steel thermometers. Specifications (20 C) Ø Ø Ø 160 mm
Electrical contacts stainless steel thermometers T11 - T12 - T13 Ø - Ø 1 - Ø 160 mm Derived from the TX thermometers of nominal diameter, 1 and 160, of which they possess all the characteristics, the T11,
535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar
Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process
ASME B73.1-2012 [Revision and Consolidation of ASME B73.1-2001 (R2007) and ASME B73.5M-1995 (R2007)] Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process AN AMERICAN NATIONAL
22 Aug J.T. Hong, S.H. Ahn, H.Y. Jeong, C.Y. Joung Neutron Utilization Technology Division, KAERI
Development of a drilling machine for the instrumentation of thermocouple in a fuel pellet 22 Aug. 2012 J.T. Hong, S.H. Ahn, H.Y. Jeong, C.Y. Joung Neutron Utilization Technology Division, KAERI Contents
SPECIFICATION STEEL COUPLING MODEL 411
Sleeve Bolt Nut Follower Gasket 1/2 2 TWO BOLT 3 12 HIGH STRENGTH 2 12 SMALL O.D. 14 60 LARGE O.D. APPLICATIONS Typical Uses Joining plain-end pipe of same outside diameters Replace split or excessively
TYPE 5610 & 5610Q SINGLE O-RING CARTRIDGE SEAL
1 Foreword These instructions are provided to familiarize the user with the seal and its designated use. The instructions must be read and applied whenever work is done on the seal, and must be kept available
HEAVY DUTY CENTRIFUGAL PUMPS
HEAVY DUTY CENTRIFUGAL PUMPS Supplemental Assembly Manual DryLock 1 Static Seal Cartridge 1. Place the slide rings (24A & 24B) into the bore of the rotary seal housing (24). The shortest slide ring goes
RS /M MZ SERIES
The RS 310-410-510-610/M MZ burners series covers a firing range from 1300 to 6300 kw, and it has been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic
High Precision Air Chucks
Precision Workholding Solutions High Precision Air Chucks www..com Improve productivity and lower the cost of secondary machining operations..... through high concentricity. Holding close concentricity
GROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR SHAFTS - NORMAL TYPE - ➁ 4 4 6 8 9 10 s 0,4 0,4 0,6 0, 0,8 0,8 1 1 ring d 2,, 4,,6 6,,4 8,4 9, d4 8,6 10, 11, 1, 14, 16 1 d2 2,8,8 4,8, 6,,6 8,6 9,6 groove m (H1) 0, 0, 0, 0,8 0,9 0,9
4.4 PUMP MAINTENANCE MODELS: DB, DC, DF, DG, DJ, DL
4.4 PUMP MAINTENANCE MODELS: DB, DC, DF, DG, DJ, DL 4.4.1 EXPLODED VIEW DRAWING REF. QTY. DB DC DF DG DJ DL DESCRIPTION PART # 1 1 ADAPTOR FRAME 034007 2 12 LOCK WASHER 3/8 x 1/8 S.S. 034004 3 12 HEX HEAD
Data Sheet for Angle Sensors
ETA25PM - R ETA25PM - F ETA25PM - TS 10 to 100-times longer life compared with multiturn potentiometers Free user programmable start and end position (electrical angle 10 up to 72000 ) Simple user programming
Producing weld preparations is done in seconds
P.O. Box 5, NL 6580 AA MALDEN Th. WORTELBOER B.V. HOLLAND phone +31 24 358 65 14 fax +31 24 358 70 79 www.wortelboer.ws Producing weld preparations is done in seconds NEW MODELS 2011/2013 PBM PIPE END
CITIZEN K 16 VIP. CNC automatic lathe with bar loader. Year of manufacture 2005
CITIZEN K 16 VIP CNC automatic lathe with bar loader Manufacturer Model CITIZEN K 16 VIP Year of manufacture 2005 Control FANUC 31i - TA Machine number K1216 / 0073 Bar loader FMB minimag 18-3200 / 1305
Water Circulation Pumps & Circulators PERFORMANCE CURVES. CI Pumps. FI Pumps. Taco Curve Book B
Water Circulation Pumps & Circulators PERFORMANCE CURVES FI Pumps CI Pumps Taco Curve Book 300-2.5B Effective April 27, 2017 (Supersedes March 31, 2012 CAPACITY IN LITERS/SEC FLOW IN GALLONS PER MINUTE
onlinecomponents.com
RE8-AH5-6 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 8- Fax +49 7938 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart
RS /E-EV BLU SERIES
The RS/E and RS/EV series burners are characterised by a modular monoblock structure that means all necessary components can be combined in a single unit thus making installation easier, faster and, above
Posiflow Proportional Solenoid Valves % ^ ) 2/2. Brass or Stainless Steel Bodies 1/8" to 1/2" NPT. Proportional Valves. Features.
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/8" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Control achieved by applying straight voltage between 0 and 24 VDC
Horizontal Band Saw. Operating Instructions and Parts Manual. Models EHB-1018VM EHB-1018VMH
Operating Instructions and Parts Manual Horizontal Band Saw Models EHB-08VM EHB-08VMH JET 427 New Sanford Road LaVergne, Tennessee 37086 www.jettools.com Ph.: 855-336-4032 Part No. M-89070 REV B2 08/204
PARTS LIST SERIES 5200
File No. 6052.120 Date: January 6, 2003 Supersedes: 6052.120 Date: June 1, 1996 SUMP PUMP NEW DESIGN 5200 SUMP PUMP PARTS IDENTIFICATION ITEM DESCRIPTION PAGE ITEM DESCRIPTION PAGE ITEM DESCRIPTION PAGE
MAINTENANCE CLEANING. MECHANICAL SEAL REPLACEMENT Refer to figures 1 and 2. SHIM ADJUSTMENT
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
Overview Grinding Applications
GRINDING 14E Overview Grinding Applications SRG Workpieces High precision grinding Steady Rests Grinding diameter Ø 20-85 mm Camshafts Crankshafts Shafts Chapter 1 Fine adjustment of the grinding center
RECOMMENDED SPARE PARTS FOR NORMAL ONE (1) YEAR OPERATION OF VD CRUSHER
RECOMMENDED SPARE PARTS FOR NORMAL ONE (1) YEAR OPERATION OF VD CRUSHER 2 ea. VD-65 Toggle 2 ea. VD-70A Right Hand Bearing Split Bushing 2 ea. VD-70B Left Hand Bearing Split Bushing 2 ea. VD-82 Plate for
MATEC 30 HV 3000 / NC
Description of the machine MATEC 30 HV 3000 / NC 1. Company 1.1. General company details Name of the company KISTNER GmbH & Co.KG Adress Industriestraße 7-9 95349 Thurnau Phone +49 9228 987-0 E-Mail info@maschinen-kistner.de
Products catalogue (I-P Edition)
Products catalogue (I-P Edition) Products catalogue (I-P Edition) FROM QUALITY OUR NATURAL DEVELOPMENT Active in the industry of Refrigeration and Air Conditioning for fifty-five years, Castel is well-established
NEW. Automation Technology 768 series
Automation Technology 78 series Screw locking acc. to DIN EN 07--0 Degree of protection IP7 Moulded versions Easy Assembly Excellent EMC shielding (versions with shielding rings 0 ) Versions with shielding
SEALING METHODS AND HARDWARE FOR EQUIPMENT AND PROCESSES APRIL 11-12, 2018
SEALING METHODS AND HARDWARE FOR EQUIPMENT AND PROCESSES APRIL 11-12, 2018 SEALING METHODS AND HARDWARE FOR EQUIPMENT AND PROCESSES INTRODUCTION to APM HEXSEAL PURPOSE To review various ways to seal equipment
Grundfos Direct Sensor
GRUNDFOS DT OOKLET Grundfos Direct Sensor sensors Grundfos Direct Sensor Table of contents 1. Product introduction 3 Type key 4 2. Relative- sensor, Industry (RPI) 5 RPI / RPI +T general data 5 RPI, 0-0.6
ph or ORP Transmitter
ph or ORP Transmitter Programmable outputs: two transistor and single or dual analog 4-20 ma (Process + Temp) Removable backlighted display Universal process connection Compatible with 120 mm ph/ ORP probes
20,00 20,00 3,00 TYP. R5,00 1,00 TYP. R3,00 TYP. 2X 4,00 THRU 1,00 TYP. 10,00 10,00 (5,00) 10,00 10,00 19,00 7,00 4,50 THRU R15,00 12,00
,00,00,00 0,0 70,00 0,00 R,00,00 TYP.,00 TYP. R,00 TYP.,00 TYP. X,00 THRU 0,00 0,00 0,00 0,00 0,00 0,00 0,00 (,00) 0,00 0,00 SETION - 9,00 0 0 7,00,0 THRU 0,0 R,00 R,00 R0,0 TYP. ETIL,00 ompetitor: Stainless
SECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 52-4777 or visit www.grizzly.com/parts to check
Yonos PARA RS **/7.0 ipwm1 Datasheet
Pioneering for You HVAC OEM Competence Centre Yonos PARA RS **/7.0 ipwm1 Datasheet 02/09 Yonos PARA RS **/7.0 ipwm1 Field of application Heating Yonos PARA RS 15/7.0 ipwm1 130 12 Yonos PARA RS High Efficiency
S80 SERIES CNC SURFACING MACHINES
S80 SERIES CNC SURFACING MACHINES Machining Equipment Created for Performance Racing & Engine Remanufacturing. So Advanced, It s Simple. S80 SERIES SURFACING MACHINES The S80 series surfacers are the most
110FC STRAIGHT LINE EDGER VICTRALUX 110FC MODEL VICTRALUX 110FC
STRAIGHT LINE EDGER VICTRALUX MODEL STRUCTURE AND MACHINE DESCRIPTION The straight line edger is made up of a pair of shoulders of considerable length (200 mm) connected by a base. The beams have been
RS /E-EV BLU SERIES
The RS/E and RS/EV series burners are characterised by a modular monoblock structure that means all necessary components can be combined in a single unit thus making installation easier, faster and, above
NKV MULTISTAGE CENTRIFUGAL PUMPS WITH VERTICAL AXIS. 60 Hz
NKV MULTISTAGE CENTRIFUGAL PUMPS WITH VERTICAL AXIS 6 Hz Certificate of Compliance Certificate: 2392698 (115146 ) Master Contract: 1996 Project: 7371 Date Issued: 216-2-8 Issued to: DAB Pumps S.p.A. 14
PARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
CERTIFIED SENSOR "SANITARY". SPECIFIC FOR THE USE IN ALIMENTARY
SNITRY SENSOR MS 2410 CERTIFIE SENSOR "SNITRY". SPECIFIC FOR THE USE IN IMENTRY N PHRMCEUTIC PPICTIONS Warranty conditions are available on this website: www.isomag.eu only in English version INEX TECHNIC
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator ANSI version Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam
DUGARD. Machine Tools Since Dugard HBM-4 / HBM-5 CNC Horizontal Boring Machines.
DUGARD Machine Tools Since 1939 Dugard HBM-4 / HBM-5 CNC Horizontal Boring Machines www.dugard.com Dugard HBM-4 Horizontal Borer Rotary Table Spindle (BT) Gear Box ATC 60 Tools (OPT) Heavy Loading capacity
TS-9100 Electronic Sensors and Transducers. Features and Benefits. G Wide range of enclosures and signal outputs
European Electronic Controls Catalogue Catalogue Section A Product Bulletin TS-9100 Issue Date 09 2000 TS-9100 Electronic Sensors and Transducers I ntroduction The TS-9100 series of electronic temperature
Incremental Encoder for special applications
Model Number Features Up to 50,000 ppr Extended temperature range Industrial standard housing Ø58 mm Servo or clamping flange 10 V... 30 V with short-circuit proof push-pull output Description High performance
Digital flow transmitter for continuous flow measurement
Digital flow transmitter for continuous flow measurement Compact or remote version for DN 06 to 400, PN10 Shows both flow rate and volume (with two totalizers) Automatic-calibration: TEACH-IN Simulation:
Chapter 3. Experimental set up. 3.1 General
Chapter 3 Experimental set up 3.1 General Experimental set up and various swirl flow generators such as full length twisted tapes, increasing and decreasing order of twist ratio sets and full length screw
Standard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants
ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to
SECTION 9: PARTS Cabinet & Base
SECTION 9: PARTS 5 5-1 48 3 75 90 49 4 91 333 46 47 30 89 88 2 34 33 37 36 78 35 32 326 316 49 42 45 83 84V2 43 1 7 8 9 12 87 10 11 Cabinet & Base 31 17 20 40 39 136 41 135 85 86 8 28 26 18 19 21 19 370
STC Hydraulic grinding milling machine for cylinder heads and blocks. BERCO S.p.A. A Company of ThyssenKrupp
STC 361-1300 Hydraulic grinding milling machine for cylinder heads and blocks A Company of ThyssenKrupp BERCO S.p.A. The machine and its executions - from grinding wheel to tool: 1 - from tool to milling
SECTION 9: PARTS Stand/Brake/Coolant Pump
SECTION 9: PARTS Stand/Brake/Coolant Pump 8-1 18 3 4 2 8 7 20 6 5 19 7 1 17 23 42 22 21 25 24 31 62 26 27 29 28 30 55 5 56 57 32 33 66 60 61 63 64 22 9 54 53 2 10 10 2 11 10 16 9 58 10 67 10 34 65 35 36
Phone: Fax: Web: -
ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to
Proportional Directional Control Valves Nominal sizes 16 and 25
Proportional Directional Control Valves Nominal sizes 16 and 25 Pilot operated, electrically adjustable Interface acc. to DIN 24 340 and ISO 4401 PN [p max. ] = 315 bar 7502968.06.01.06 Description Design
Base/Stand Model G9743 (Mfg. since 12/07) V V2 86V V2 89V
SECTION 9: PARTS 97 364 102 101 33 34 32 29 31 30 366 96 83 372 367 368 365 100 99 98 370 369 95 28 374 377 373 376 375 77 68 94 95 87V2 93 Base/Stand 1 2 62 61 78 26 27 15 16 17 79 25 76 88V2 9 21 18
Pressure Transmitter SIL
Pressure Transmitter SI Characteristics - TRANSDUCER - Pressure: Range: Output: Accuracy: Temperature of medium: Material enclosure: Pressure connection: Electrical connection: Protection: relative / absolute
1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
UII Pump Parts
0-4-0-4-UII Pump Parts. Page 66 95-0305 September 009 Parts Lists 0-4-0-4-UII Pump Parts QTY. PER PUMP PART NOTES 0-U Pump Body See Note 0-U Pump Body with Flush See Note 4-U Pump Body See Note 4-U Pump
Diesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
KFS. Flap-type flow meter. Design and range of application
Design and range of application The measuring device operates largely independent of viscosity and is suitable for indicating the flow rate of water, acids, alkaline solutions and gases. Every device is
Digital conductivity transmitter
Digital conductivity transmitter Compact version with integrated conductivity electrodes Remote version with seperated transmitter for short (15 ft.) or long (1500 ft.) distance Commissioning is easy due
Rotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
10.PART LISTS 10.1 ELEVATING ASSEMBLY (Ⅰ) ELEVATING ASSEMBLY DRAWING 10-1
10.PART LISTS 10.1 ELEVATING ASSEMBLY (Ⅰ) 10.1.1 ELEVATING ASSEMBLY DRAWING 10-1 10.1.2 ELEVATING ASSEMBLY (Ⅰ) PART LIST NO. PART NO. DESCRIPTION QTY 1. 5TON 15 PNEUMATIC BOOSTING CYLINDER 1 2. HN-M12
DUOLINE. Rotary vane pumps for all applications in the low and medium vacuum range
DUOLINE Rotary vane pumps for all applications in the low and medium vacuum range DUOLINE Rotary vane pumps for all applications in the low and medium vacuum range The two-stage high-performance rotary
flexible couplings for pipe connections with axial restraint
www.arpol.com A R P O L F I X flexible couplings for pipe connections with axial restraint 1 TABLE OF CONTENTS Advantages & installation Sealing & anchoring system 4 5 Nominal charts 6 Material specifications
Casing while Drilling. Enhanced Casing Installation
Casing while Drilling Enhanced Casing Installation CWD Definition, History & Experience Casing while Drilling means utilizing the casing string as the drill string instead of drill pipe. 1907 Reuben Baker
Stainless Steel Rotary Indexing Tables and A-Axes for Wire and Sinking EDM. Catalogue RE 4905
Stainless Steel Rotary Indexing Tables and A-Axes for Wire and Sinking EDM Catalogue RE 4905 Rotary Indexing Tables and A-Axes by HIRSCHMANN Pin point accuracy Controlled dynamic power Consistent performance.