Horizontal Band Saw. Operating Instructions and Parts Manual. Models EHB-1018VM EHB-1018VMH

Size: px
Start display at page:

Download "Horizontal Band Saw. Operating Instructions and Parts Manual. Models EHB-1018VM EHB-1018VMH"

Transcription

1 Operating Instructions and Parts Manual Horizontal Band Saw Models EHB-08VM EHB-08VMH JET 427 New Sanford Road LaVergne, Tennessee Ph.: Part No. M REV B2 08/204 Copyright 204 JET

2 SAW STAND AND BED ASSEMBLY EHB 08VM, 08VMH EHB-08VM EHB-08VMH 5

3 PARTS LIST EHB-08VM, EHB-08VMH Index No. Part No. Description Size Qty. EHB96V-64 Fitting 2 EHB96V-65 Tubing 5/6" 65" 2 3 EHB08VM-66 Valve 4 EHB08VM-67 Feed Knob 5 TS Socket Head Cap Screw 3/8 -/2" 2 6 EHB08VM-9 Rack block 7 EHB08VM-92 Vise jaw Bracket 8 TS Set Screw /4-20 3/8" 9 EHB08VM-94 Rack block 0 EHB08VM-95 Acme Nut Assembly EHB08VM-96 Fixed Pin 2 EHB08VM-97 Rack 3 TS Hex Cap Screw 5/6-8 3/4" 2 4 EHB08VM-99 Moveable Bed 5 EHB08VM-200 Adjustable Handle 6 TS Flat Washer 3/8" 7 EHB08VM-202 Vise Jaw Bracket (fixed) 8 TS Socket Head Cap Screw 5/6"-8 -/4" 4 9 TS Hex Cap Screw 3/8-6 -3/4" 20 TS Hex Nut 3/8" 2 EHB96V-206 Limit Switch 22 EHB08VM-207 Limit Switch Seat(Ser No and lower) EHB08VM-207N Limit Switch Seat(Ser No.xxxx0025 and higher) 23 EHB08VM-208 Limit Switch 24 EHB08VM-209 Bracket 24- EHB96V-209- Knob 24-2 EHB96V-9 Special Washer 24-3 EHB08VM Screw 24-4 TS-0560 Nut 24-5 EHB08VM Block 24-6 EHB08VM Screw EHB08VM Screw EHB96V-225 Screw EHB08VM Ring EHB08VM-OHCA Oil Hydraulic Cylinder Assembly (includes # 25-33) 25 EHB96V-20 Cap 26 EHB96V-2 Oil Seal EHB08VM-23 Rod 28 TS Flat Washer 5/6" 29 EHB96V-25 Piston 30 EHB96V-26 Seal 3 EHB96V-27 Inoin Ring 32 TS Hex Nut 5/6" x 8T 2 33 EHB96V-29 Tube Assembly 34 EHB96V-22 Tube Fitting 6 Horizontal Band Saw

4 Index No. Part No. Description Size Qty. 35 EHB96V-222 Tube Fitting 36 EHB96V-223 Retaining Ring S-7 37 EHB96V-224 Pivot Shaft 38 EHB96V-225 Socket Set Screw 3/8"-6T 3/8" 39 TS Flat Washer 5/6" 4 40 TS Hex Cap Screw 5/6 " 4 4 EHB96V-232 Motor Plate 42 EHB08V-233 Rear Pivot Bracket 43 EHB96V-234 Socket Set Screw /2" x 2" 2 44 EHB96V-235 Hex Nut /2" TS Socket Head Cap Screw 3/8"-6T -3/4" 3 46 TS Flat Washer 3/8" 3 47 TS Set Screw 3/8"-6 /2" 48 EHB08VM-24 Eccentric 49 TS-0050 Hex Cap Screw 5/6 x -/2" 50 TS Flat Washer 5/6" 5 TS Hex Nut 5/6 x 8T 52 TS Hex Nut. 5/8" 53 EHB08VM-247 Handle 54 EHB96V-248 Pin (not show) 55 EHB96V-249 Hand Wheel 55- EHB96V-249- Handle 56 EHB08VM-250 Seat (08VM only) 56- TS Hex Cap Screw (08VM only) 5/6"-8 " TS Lock Washer (08VM only) 5/6" 2 57 EHB08VM-252 Acme Screw(08VM only) 57 EHB08VMH-252 Acme Screw(08VMH only)(not shown) 57- EHB96V-252- Collar 58 EHB96V-253 Roll Pin 6 ø 30 ø 59 EHB08VM-254 Locking screw 60 EHB08VM-255 Special Washer 6 EHB08VM-256 Locking pieces 62 TS Flat Washer /2" 63 TS Hex Nut. /2" TS Socket Set Screw /4 x 3/4" 65 EHB08VM-260 Table 66 TS Socket Head Cap Screw 5/6" " 4 67 EHB08VM-262 Block 68 EHB08VM-263 Swiveling Seat 68- EHB08VM-263- Support Seat 68-2 TS Hex Cap Screw /2 x 5-/ TS-0640 Hex Nut /2" 68-4 TS Hex Cap Screw 3/8 x -/ TS Hex Nut. 3/8"-6 69 TS Hex Cap Screw /4" 3/4" 2 70 EHB96V-265 Collar 2 7 TS Socket Set Screw 3/8-6T 3/8" 4 72 EHB96V-267 Copper 2 EHB-08VM EHB-08VMH 7

5 Index No. Part No. Description Size Qty. 73 TS Socket Set Screw 3/8-6T 3/8" 2 74 EHB96V-269 Pivot Shaft 75 EHB08VM-270 Spindle 76 EHB08VM-27 Base Assembly 76- EHB08VM-27- Base Lid 76-2 EHB08VM-27-2 Base Lid 76-3 EHB08VM-27-3 Door 76-4 EHB08VM-27-4 Wiring box 77 EHB08VM-272 Sliding Surface 78 TS Socket Set Screw /4-20 3/4" 6 79 TS Socket Head Cap Screw 5/6"-8 " 3 80 EHB08VM-276 Seat 8 EHB08VM-277 Movable Block 82 EHB96V-278 Gun Set 82- EHB96V-278- Hook 82-2 EHB96V Hex Cap Screw 2 83 TS Hex Cap Screw 5/6"-8 " 2 84 TS Hex Nut /2"-2T 4 85 EHB08VM-28 Coolant Tank 85- EHB08VM-28- Coolant Pump 85-2 EHB96V-28-2 Pan Head Machine Screw EHB96V-96 3 Way Coolant Block 85-4 EHB96V-28-4 Lock W/Key 85-5 EHB96V-28-5 Lock W/o Key 2 86 EHB08VM-282 Bracket 87 TS Hex Cap Screw /2"-2 2" 4 88 TS Socket Head Cap Screw 5/6' x -/4" 8 89 TS Set Screw /4"-20 3/4" 8 90 EHB08VM-286 Strap 9 EHB96V-26 Special Washer 92 TS Flat Washer /4" 2 93 TS Hex Cap Screw /4"-20 3/4" 2 94 EHB96V-245 Knob EHB08VM-SA Adj. Stock Stop Assembly (includes #95-98,#0) 95 EHB08V-258 Shaft 7/8 96 EHB08VM-292 Stop Bracket 97 EHB08V-260 Bar 98 EHB96V-257 Knob 2 99 EHB08VM-295 Arch Seat 00 EHB08VM-296 Support Block 00- EHB08VM-296- Socket Head Cap Screw EHB08VM Screw w/nut 0 EHB96V-257 Knob 02 EHB08VM-298 Scale 03 EHB08VM-299 Indicator 04 EHB08VM-300 Nameplate 05 EHB08VM-30 Start Switch 8 Horizontal Band Saw

6 Index No. Part No. Description Size Qty. 05- EHB08VM-30- Raise/Lower/Vise Clamp/Vise Unclamp 4 Switch 06 EHB08VM-302 Stop Switch 07 EHB08VM-303 Selection Switch 2 08 EHB08VM-304 Emergency Switch 09 EHB96V-305 Indication Light For Power 0 EHB08VM-306 Control Box 0- EHB08VM-306- Tube EHB08VM-307 Screw 3/6" x 3/8" 9 2 EHB08VM-3 Acme Leadscrew Seat 3 TS Flat Washer 5/6" 2 4 TS Socket Head Cap Screw 5/6-8 " 2 5 EHB08VM-34 Fixing Rod for Spring 6 TS-0207 Socket Head Cap Screw /2" -/2" 7 EHB08VM-36 Spring 8 EHB08VM-37 Spring Cover 9 EHB08VM-38 Bracket 20 EHB08VM-39 Spindle 20- EHB08VM-39- Open Pin /8 x 2 2 EHB08VMH-320 Hydraulic Vise Assembly (includes #2-~2-5) (08VMH only) 2- EHB08VMH-320- O Ring EHB08VMH Oil Scraping Ring UHS EHB08VMH Upper Cap 2-4 EHB08VMH Lower Cap 2-5 EHB08VMH Special Screw M EHB08VM-32 Hydraulic Motor /4 HP 23 EHB08VMH-322 Direction Valve (08VMH only) 24 EHB08VMH-323 Reducing Valve (08VMH only) 25 EHB08VMH-324 Manifold Block (08VMH only) 26 EHB08VM-325 Hydraulic Pump 27 EHB08VM-326 Oil Box 28 EHB08VM-327 Solenoid Valve EHB-08VM EHB-08VMH 9

7 SAW ARM ASSEMBLY EHB 08VM, 08VMH Horizontal Band Saw

8 PARTS LIST SAW ARM EHB 08VM, 08VMH Index No. Part No. Description Size Qty. EHB96V-0 Handwheel - EHB96V-0- Handwheel handle 2 2 EHB96V-02 Collar 3 EHB96V-03 Shaft 4 EHB96V-04 Bracket 5 EHB96V-05 Slide 6 EHB96V-06 Gib 2 7 EHB96V-07 Collar 8 EHB96V-08 Roll pin 5x EHB96V-08- Roll pin 5x40 9 TS Hex Cap Screw 5/6 x 3/4 4 0 EHB96V-0 Adjusting Screw 3/4 x -/2 TS-0060 Hex Cap Screw 3/8 x 2-/2 2 TS Set Screw 3/8" x 3/8 3 EHB96V-3 Spindle 4 BB-503 Thrust bearing BB TS Hex Cap Screw 3/8 x -/4 6 EHB96V-6 Roll Pin 5 x 30 7 TS Lock Washer 3/8" 8 EHB96V-8 Driven 9 EHB96V-9 Thrust Bearing Housing 20 EHB96V-20 Lock nut 2 EHB96V-2 Disc Spring 6 22 EHB96V-22 Copper 23 TS Set Screw /4 x 3/8 24 TS Lock Washer 5/6" 25 TS Hex Cap Screw 3/8" x " 26 EHB96V-26 Special Washer 28 EHB96V-28 Wheel L.H. 29 BB6306ZZ Bearing BB6306ZZ 2 3 EHB96V-3 Output Shaft 32 EHB96V-32 Oil Seal BB Bearing 34 EHB96V-34 Oil Plug /8" 35 EHB96V-35 Gear Box Housing 35- EHB96V-35- Cover EHB96V-GBCA Gear Box Cover Assembly (includes 35, 35-) 36 TS Hex Cap Screw 3/8-6 3/4" 3 37 TS Lock Washer 3/8" 3 38 EHB96V-38 Worm Gear 39 EHB96V-39 Key 7 x 7 x BB Bearing 4 TS Set Screw /4" 3/4" 3 42 EHB96V-42 Cap 43 TS Lock Washer 3/8" 3 EHB-08VM EHB-08VMH 2

9 Index No. Part No. Description Size Qty. 44 TS Hex Cap Screw 3/8"-6 -/2" 3 45 TS Socket Head Cap Screw /4"-20 5/8" 3 46 TS-0560 Hex Nut / EHB96V-47 Cap 48 SB-3/6 Steel Ball 3/ TS Set Screw 5/6"-8 5/8" 50 TS Socket Head Cap Screw /4"-20 5/8" 4 5 BB-6004 Bearing BB EHB96V-52 Input Shaft 55 BB-3205 Bearing EHB96V-56 Oil Seal EHB96V-57 Cap 58 TS Socket Head Cap Screw /4"-20 5/8" 4 68 EHB08VM-68 Bow Frame 68- EHB96V-68- Frame Handle 70 TS Hex Cap Screw 5/6" x 3/4" 2 7 TS Flat Washer 5/6" 2 73 EHB96V-73 Tube Retainer 2 74 EHB96V-74 Round Head Screw 3/6" x 3/8" 2 76 TS Flat Washer 5/6" 2 77 TS Hex Cap Screw 5/6" x 3/4" 2 78 TS Hex Cap Screw 5/6" x 3/4" 2 79 TS Flat Washer 5/6" 2 80 EHB96V-80 Drive Wheel. 8 TS Socket Set Screw 3/8-24 3/8" 82 EHB96V-82 Key 7 x 7 x TS Hex Cap Screw 5/6-8 3/4" 2 84 TS Lock Washer 5/6" 2 85 EHB96V-85 Bracket 86 EHB96V-86 Sensor 86- EHB96V-86- Sensor seat 86-2 EHB96V-86-2 Screw 2 88 EHB96V-88 Knob 2 89 EHB96V-88 Knob 90 EHB96V-90 Blade Tension Gauge 90- EHB96V-90- Pin 9 EHB96V-9 Front Pivot Bracket 92 TS Lock Washer 3/8" 3 93 TS Hex Cap Screw 3/8-6 3/4" 3 94 TS Socket Set Screw 3/8-6 /2" 95 EHB08VM-95 Motor 2Hp,230/460V 96 EHB96V-96 3 Way Coolant Block 97 EHB08VM-97 Hose 2 98 EHB96V-98 Valve 2 99 EHB08V-99 Hose Clamp 2 00 EHB08VM-00 Belt (for 08VM/08VMH) 0 EHB96V-0 Cable Glands(not show) PG Horizontal Band Saw

10 Index No. Part No. Description Size Qty. 03 EHB96V-03 Upper Guard 09 EHB96V-09 Lower Guard 0 EHB96V-0 Motor Pulley TS Socket Set Screw 5/6-8 5/6" 2 EHB96V-2 Pulley 3 TS Socket Set Screw 5/6-8 5/6" 4 EHB96V-4 Key 5 x 5 x 40 8 TS Lock Washer 5/6" 2 9 EHB96V-9 Hex Head Screw 5/6-20 3/4" 2 2 EHB96V-2 Round Head Screw 0-3/6 3/8" 4 22 EHB96V-22 Cover R.H. 23 TS Lock Washer 3/8" 4 26 TS Lock Washer 3/8" 3 27 TS Hex Cap Screw 3/8 6 3/4" 3 28 EHB08V-28 Stationary plate 2 29 EHB08V-29 Bracket 30 TS Socket Head Cap Screw 3/8"-6 -/4" 2 3 TS Set Screw /4"-20 3/4" 4 32 TS Set Screw 5/6"-8 5/8" 33 EHB08V-33 Bracket-R.H EHB08VM-34 Slide 34- EHB96V-34- Scale 35 EHB96V-35 Screw 3/6"-24 7/8" 4 36 EHB96V-36 Carbide Guide 4 37 EHB08V-37 Collar 2 38 TS Set Screw /4" /4" 2 39 EHB96V-39 Wire Brush 40 EHB08V-40 Bracket 4 TS Socket Head Cap Screw /4"-20 5/8" 2 42 TS Flat Washer /4" x 9 x EHB96V-44 Guide 2 45 TS Hex Nut 5/6"-8T 2 46 TS Flat Washer 3/8" 4 47 BB6200ZZ Bearing 6200 ZZ 48 EHB96V-48 Special Screw M0 x BB6200ZZ Bearing 6200 ZZ 2 50 EHB96V-50 Special Screw 5 EHB96V-5 Special Screw 53 EHB96V-53 Adjustable Handle 54 EHB96V-54 Guide Cover 54- EHB96V-54- Screw TS Washer 2 55 EHB08V-55 Bracket-L.H EHB96V-56 Bladecover 56- EHB96V-56- Screw TS Washer 2 57 EHB96V-57 Blade cover 58 EHB96V-58 Special Knob 2 EHB-08VM EHB-08VMH 23

11 Index No. Part No. Description Size Qty. 59 TS Flat Washer 3/8" 60 TS Hex Head Screw 3/8 6 3/4" 3 6 EHB08V-6 Bracket 65 EHB96V-65 Round Head Screw 3/6 3/8" 4 66 EHB96V-66 Cover L.H. 67 EHB96V-67 Handle 2 68 TS-08F05 Phillips Screw /4"-20 3/4" Blade "x0.035"x 44" (4/6T) 24 Horizontal Band Saw

12 ELECTRICAL BOX ASSEMBLY EHB 08VMH PARTS LIST ELECTRICAL BOX EHB 08VMH Index No. Part No. Description Size Qty EHB08VM-308- Transformer 230/460/2/24/0V EHB08VM Fuse Blocks 32A 600V EHB08VM Fuse 5A EHB08VM Relay 250V 0A EHB08VM Relay Socket EHB08VM Terminal Block EHB08VMH Electrical Plate EHB08VM Round Head Screw 3/6 x 3/ TS Washer 3/ EHB08VM Power Cable EHB08VM Control Wire 308- EHB08VM-308- Ground Cable Yellow/Green EHB08VM Overload Relay RHU-0K EHB08VM Magnetic Contactor CU- 0V EHB08VMH Terminal EHB08VM Motor Cable EHB08VM Pump Cable EHB08VM Hydraulic Cable EHB08VM Limit Switch Cable EHB08VM Limit Switch Cable EHB08VM Hydraulic Cable 26 Horizontal Band Saw

Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw

Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw 136 137 135 134 132 131 133 113 114 115 117 116 118 119 120 121 79 78 77 107 108 65 76 110 109 66 10 9 6 11 5 4 8 7 75 74 73 72 111 112

More information

Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040

Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040 Operating Instructions and Parts Manual 10 x 16 Horizontal Band Saw Models J-7020, J-7040 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414472 Ph.: 800-274-6848 Revision C2 03/2014 www.jettools.com

More information

Horizontal Band Saw. Operating Instructions and Parts Manual. Models EHB-916V EHB-1018V

Horizontal Band Saw. Operating Instructions and Parts Manual. Models EHB-916V EHB-1018V Operating Instructions and Parts Manual Horizontal Band Saw Models EHB-916V EHB-1018V JET 427 New Sanford Road LaVergne, Tennessee 37086 www.jettools.com Ph.: 855-336-4032 Part No. M-891050 REV D1 08/2018

More information

HYDRAULIC CONTROL DETAILS PARTS LIST

HYDRAULIC CONTROL DETAILS PARTS LIST Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank

More information

Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head

Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise

More information

SECTION 9: PARTS Cabinet & Base

SECTION 9: PARTS Cabinet & Base SECTION 9: PARTS 5 5-1 48 3 75 90 49 4 91 333 46 47 30 89 88 2 34 33 37 36 78 35 32 326 316 49 42 45 83 84V2 43 1 7 8 9 12 87 10 11 Cabinet & Base 31 17 20 40 39 136 41 135 85 86 8 28 26 18 19 21 19 370

More information

Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4

Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016

More information

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or READ THIS FIRST Model G0811 ***IMPORTANT UPDATE*** For Machines Mfd. Since 02/16 and Owner's Manual Printed 11/16 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

More information

Trajan 1319ADR Fabricating Saw Parts and Service Manual Order Parts From

Trajan 1319ADR Fabricating Saw Parts and Service Manual Order Parts From www.trajansaw.com Trajan 1319ADR Fabricating Saw Parts and Service Manual Order Parts From www.bandsawparts.com 713-884-1101 CODE_NO PART_NO DESCRIPTION SPECIFICATION QTY 1S 103005AS Stand 1.00 2 103009

More information

Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836

Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836 Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690036 Ph.: 800-274-6848 Revision C 11/2014 www.jettools.com

More information

Parts List: VBS-3612 Band Saw

Parts List: VBS-3612 Band Saw Parts List: VBS-3612 Band Saw (refer to breakdowns on pages 35 and 36) Index No. Part No. Description Size Qty 1... VBS3612-101...Gear Box... 1 2... TS-0209101...Socket Head Cap Screw...3/8-16 x 2-1/4...

More information

Operation and Maintenance Instructions Geared Head Bench Lathe Models GHB-1340A, GHB-1440A

Operation and Maintenance Instructions Geared Head Bench Lathe Models GHB-1340A, GHB-1440A Operation and Maintenance Instructions Geared Head Bench Lathe Models GHB-1340A, GHB-1440A (GHB-1340A shown with optional stand 321443AK) For Parts List and Electrical Diagrams, see document M-321357A

More information

Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS

Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690060 Ph.: 800-274-6848 Revision G1 06/2015

More information

SECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION

SECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION SECTION 9: PARTS Electrical 1 P4002001 START BUTTON 52 P4002052 CONTACTOR GSC1CJX4-D 110V 2 P4002002 INDICATOR LIGHT 53 P4002053 CONTACTOR JZC3-40D 110V 3 P4002003 JOG BUTTON 54 P4002054 FUSE HOLDER 4

More information

PARTS LIST: Air Control Assembly (1632 Sander)

PARTS LIST: Air Control Assembly (1632 Sander) PARTS LIST: Air Control Assembly (1632 Sander) 1 6293482 Filter... 1 2 6293483 Solenoid Valve... 1 3 6293484 Brake Cylinder... 1 4 6293485 Multi-Hole Connector... 1 5 6293486 Air Valve... 1 6 6293487 Air

More information

414477T 400/50/3 PARTS LIST

414477T 400/50/3 PARTS LIST MBS-1014W Metal Working Bandsaw 414477T 400/50/3 PARTS LIST Walter Meier (Fertigung) AG Bahnstrasse 24 8603 Schwerzenbach Switzerland Phone +41 44 806 47 48 Fax +41 44 806 47 58 jetinfo.eu@waltermeier.com

More information

Main Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2

Main Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2 Main Breakdown 53 85-1 54 59 54 56 54 52 55 57 175 53 56 85 29 119-2 114 89 22 119-2 119 107 119-5 119-3 119-6 119-1 29 22 119-4 114 112 96 113 114 100 116 117 105 120 102 103 108 115 99 98 92 91 90 73

More information

535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.

535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A. Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar

More information

M1014 7" x 12" Metal Cutting Bandsaw PARTS -38-

M1014 7 x 12 Metal Cutting Bandsaw PARTS -38- 14 13 15 16 18 17 55 10 12 11 19 54 9 20 53 7 5 4 60 7 3 1 28 6 2 61 23 27 26 29 21 24 25 22 32 32 33 35 36 37 38 49 48 47 40 39 34 30 59 51 52 46 45 44 43 42 42 41 50 56 57 58-38- Parts List 1 XM1014001

More information

Base/Stand Model G9743 (Mfg. since 12/07) V V2 86V V2 89V

Base/Stand Model G9743 (Mfg. since 12/07) V V2 86V V2 89V SECTION 9: PARTS 97 364 102 101 33 34 32 29 31 30 366 96 83 372 367 368 365 100 99 98 370 369 95 28 374 377 373 376 375 77 68 94 95 87V2 93 Base/Stand 1 2 62 61 78 26 27 15 16 17 79 25 76 88V2 9 21 18

More information

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or READ THIS FIRST Model G4002/G4003 ***IMPORTANT UPDATE*** For Machines Mfd. Since December, 2014 and Owner's Manual Printed April, 2014 For questions or help with this product contact Tech Support at (570)

More information

Headstock and Bow Breakdown (G0613)

Headstock and Bow Breakdown (G0613) SECTION 8: PARTS Headstock and Bow Breakdown (G0613) -48- G0613/14 Swivel Mast Metal Cutting Bandsaw Parts List (G0613) 1 PSB64M CAP SCREW M10-1.5 X 25 43 P0613043 HANDLE 2 PW04M FLAT WASHER 10MM 44 P0613044

More information

Parts Breakdown G4030

Parts Breakdown G4030 Parts Breakdown G4030 G4030 6 1 2" x 10" Metal-Cutting Bandsaw -35- Parts Breakdown G4030-36- G4030 6 1 2" x 10" Metal-Cutting Bandsaw Parts Breakdown G4030 G4030 6 1 2" x 10" Metal-Cutting Bandsaw -37-

More information

for GH-1340W/1440W Lathes

for GH-1340W/1440W Lathes PARTS LIST and Electrical Diagrams for GH-1340W/1440W Lathes See manual no. M-321810 for operating and maintenance instructions. WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee

More information

GEAR HEAD METAL LATHE

GEAR HEAD METAL LATHE GEAR HEAD METAL LATHE MODEL G4002 / G4003 PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF

More information

10x15-inch Woodworking Lathe Models JWL-1015, JWL-1015VS

10x15-inch Woodworking Lathe Models JWL-1015, JWL-1015VS Operating Instructions and Parts Manual 10x15-inch Woodworking Lathe Models JWL-1015, JWL-1015VS model JWL-1015VS shown JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-719100 Ph.: 800-274-6848

More information

Trajan 812G Cut Off Saw Parts and Service Manual Order Parts From

Trajan 812G Cut Off Saw Parts and Service Manual Order Parts From www.trajansaw.com Trajan 812G Cut Off Saw Parts and Service Manual Order Parts From www.bandsawparts.com 713-884-1101 1 195006B Base 1 2S 195016ES Stand Complete Assembly 1 2-1 195016E Coolant Pan 1 2-2

More information

SECTION 9: PARTS. Accessories

SECTION 9: PARTS. Accessories SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 5 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY

More information

SECTION 9: PARTS. Accessories

SECTION 9: PARTS. Accessories SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY

More information

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A

G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1

More information

G0614 Control Box Parts

G0614 Control Box Parts G0614 Control Box Parts 247V2 250V3 251V3 252V3-1 246V2 252V3 253V2 256V2 254V2 255V2 257V2 246V2 P0614246V2 FUSE HOUSING GIKO KA FSB102-1-2 V2.07.06 253V2 P0614253V2 ON BUTTON AP-PBF-22-1/0G V2.07.06

More information

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or READ THIS FIRST Model G5912Z/G7214Z/G8621 ***IMPORTANT UPDATE*** For Machines Mfd. Since 1/17 and Owner's Manual Printed 2001 For questions or help with this product contact Tech Support at (570) 546-9663

More information

G8146Z Cabinet Breakdown & Parts List

G8146Z Cabinet Breakdown & Parts List PROG FUN DATA KEYPAD RPM T.S MPM RUN STOP RESET G8146Z Cabinet Breakdown & Parts List 29 30 31 32 35 33 34 14 16 18 11 12 10 8 15 17 9 13 22 21 19 20 24 25 4 4-1 7 4-2 4-4 3 2 5 4-3 6 19 20 23 27 28 26

More information

G0614 Control Box Parts

G0614 Control Box Parts READ THIS FIRST Model G0613/G0614 ***IMPORTANT UPDATE*** 192 For Machines Mfd. Since 07/06 and Owner's Manual Revised 12/07 For questions or help with this product contact Tech Support at (570) 546-9663

More information

Page 1 Parts List for AL-51G (L160) 07/08/201. Headstock Assembly

Page 1 Parts List for AL-51G (L160) 07/08/201. Headstock Assembly Page 1 Parts List for AL-51G (L160) 07/08/201 Headstock Assembly 1--------1002-------------------Headstock Casting 13-------1012------------------------------Nut M28 2--------1006---------------------------Flange

More information

Trajan 20 Cut Off Saw Parts and Service Manual Order Parts From

Trajan 20 Cut Off Saw Parts and Service Manual Order Parts From www.trajansaw.com Trajan 20 Cut Off Saw Parts and Service Manual Order Parts From www.bandsawparts.com 713-884-1101 Parts List Page 1 CODE_NO PART_NO DESCRIPTION SPECIFICATION QTY 1A 133062A Swivel Arm

More information

STARTING SERIAL NUMBER PARTS LIST FOR. Wellsaw MODEL 600 METAL CUTTING BAND SAW

STARTING SERIAL NUMBER PARTS LIST FOR. Wellsaw MODEL 600 METAL CUTTING BAND SAW STARTING SERIAL NUMBER 11075 PARTS LIST FOR Wellsaw MODEL 600 METAL CUTTING BAND SAW Wellsaw 2829 N. Burdick, Kalamazoo, MI 49004 Phone: 269-345-1132 Fax: 269-345-0095 Rev 171005 INSTALLATION, OPERATION

More information

SECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION

SECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION SECTION 9: PARTS Headstock 120 121 113 115 112 111 110 109 108 105 106 107 135 101 119A 121 120 118 114 115 107 106 104 123 122 118 114 126A 105 126 103 102 126B 127A-1 131 127A 124 133 134 126C 129 130

More information

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or READ THIS FIRST Model G0503 ***IMPORTANT UPDATE*** For Machines Mfd. Since 11/06 and Owner's Manual Revised 05/11 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

More information

12. Mechanical Drawings & Parts Breakdown List

12. Mechanical Drawings & Parts Breakdown List 12. Mechanical Drawings & Parts Breakdown List Note: When ordering parts, please be prepared with, 1. Machine model & serial number. 2. Item number. 3. Part number and description. 4. Year of Production.

More information

HEADSTOCK (CASTNG & CONTROLS)

HEADSTOCK (CASTNG & CONTROLS) HEADSTOCK (CASTNG & CONTROLS) REF.NO. PART NO. DESCRIPTION Q'TY 1 VE2101 HEADSTOCK CASTING 1 2 VE2134 HEADSTOCK COVER 1 3 VE2116 SHAFT 1 4 VE2117 GEAR 1 5 VE2118 WASHER 1 6 VE2119 SHAFT 1 7 VE2120 GEAR

More information

How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced)

How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) 1. Press and hold the set button (top left corner) until the display shows Fun

More information

3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes

3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit

More information

1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *

1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * * -I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()

More information

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or READ THIS FIRST Model G0668 ***IMPORTANT UPDATE*** For Machines Mfd. Since June, 2008 and Owner's Manual Printed February, 2008 For questions or help with this product contact Tech Support at (570) 546-9663

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in

More information

Miter Cold Saw PARTS LIST ERSATZTEILLISTE LISTE DE PIECES

Miter Cold Saw PARTS LIST ERSATZTEILLISTE LISTE DE PIECES MCS-315 Miter Cold Saw MCS-315-M 50000220M 1~230V, 50Hz MCS-315-T.50000220T 3~400V, 50Hz PARTS LIST ERSATZTEILLISTE LISTE DE PIECES Walter Meier (Tool) AG Tämperlistrasse 5 CH-8117 Fällanden Phone +41

More information

SECTION 10: PARTS. Headstock

SECTION 10: PARTS. Headstock 33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

Metal Working Bandsaw M 230/50/1 PARTS LIST MBS-56CS

Metal Working Bandsaw M 230/50/1 PARTS LIST MBS-56CS MBS-56CS Metal Working Bandsaw 50000320M 230/50/1 PARTS LIST Walter Meier (Fertigung) AG Bahnstrasse 24 8603 Schwerzenbach Switzerland Phone +41 44 806 47 48 Fax +41 44 806 47 58 jetinfo.eu@waltermeier.com

More information

Parts List: Head Assembly

Parts List: Head Assembly Head Assembly 23 Parts List: Head Assembly Index No. Part No. Description Size Qty 1...JWP15H-001... Head Casting......1 2...TS-1525021... Set Screw... M10x12...8...JWP15DX-CA... Cutter Head Assembly (Index

More information

Column & Stand. -4- Model G0759 (Mfd. Since 1/14)

Column & Stand. -4- Model G0759 (Mfd. Since 1/14) Column & Stand 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 3 26 27 28 29 31 31-1 32 33 34 47 46 45 3644 48 35 36 37 39 43 44 42 38 40 41 412 24 23 22 52 51 50 30 49 412-2 412-1 57 58 39 59 60

More information

SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION

SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK

More information

Operating Instructions and Parts Manual Semi-Automatic Band Saw Model HBS-1321W

Operating Instructions and Parts Manual Semi-Automatic Band Saw Model HBS-1321W Operating Instructions and Parts Manual Semi-Automatic Band Saw Model HBS-1321W For serial no. 1711PI00576 and higher JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414471 Ph.: 800-274-6848

More information

SECTION 9: PARTS Headstock Case and Shift

SECTION 9: PARTS Headstock Case and Shift SECTION 9: PARTS Headstock Case and Shift 3 1 2 10-1 10-2 8 9 10 6 7 19 10-3 15 11 12 25 16 17 18 14 13 12 32 26 29 20 21 33 34 27 35 37 28 43 22 38 39 40 31 45 28 43 23 41 5 28 43 44 30 36-80- Model G0709

More information

EEBR312A Brake Lathes Parts Identification

EEBR312A Brake Lathes Parts Identification EEBR312A Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference

More information

G0614 Control Box Parts

G0614 Control Box Parts READ THIS FIRST Model G0613/G0614 ***IMPORTANT UPDATE*** 192 For Machines Mfd. Since 07/06 and Owner's Manual Revised 12/07 For questions or help with this product contact Tech Support at (570) 546-9663

More information

Operating Instructions and Parts Manual 10 x 14 Horizontal Mitering Band Saw Model MBS-1014W

Operating Instructions and Parts Manual 10 x 14 Horizontal Mitering Band Saw Model MBS-1014W Operating Instructions and Parts Manual 10 x 14 Horizontal Mitering Band Saw Model MBS-1014W JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414477 Ph.: 800-274-6848 Revision H1 01/2017 www.jettools.com

More information

11. PARTS LIST 11.1 HEAD STOCK UPSIDE (1) 11-1

11. PARTS LIST 11.1 HEAD STOCK UPSIDE (1) 11-1 11. PARTS LIST 11.1 HEAD STOCK UPSIDE (1) 11-1 HEAD STOCK UPSIDE (1) PARTS LIST NO. PART NO DESCRIPTION QTY 1. SC-M6x20L SOCKET CAP SCREW 4 2. K6-K042-00 TOP BEARING CAP 1 3. 6009LLB BALL BEARING 1 4.

More information

SECTION 9: PARTS G0514X

SECTION 9: PARTS G0514X SECTION 9: PARTS G0514X Main 48 23 24 21 55 17 19 22 24 50 49 3 22 26 17 21 15 14 16 13 46 47 10 32 7 38 33 3435 37 12 44 45 41 42 43 11 40 8 39 165 166 1 11-1 29 30 25 28 26 27 5 4 58 57 64 65 56 68 62

More information

SECTION 9: PARTS Column Breakdown

SECTION 9: PARTS Column Breakdown SECTION 9: PARTS Column Breakdown 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 26 27 28 29 3 31 31-1 32 33 34 35 36 37 39 38 47 48 46 45 3644 44 43 40 41 42 24 23 22 52 51 50 30 49 57 58 59 60

More information

EXPLODED VIEW. Dake Corporation 724 Robbins Road Grand Haven, MI

EXPLODED VIEW. Dake Corporation 724 Robbins Road Grand Haven, MI EXPLODED VIEW *Exploded view is only for 350CE Cold Saw with Frequency Drive Motor* 21 REV032019 350CE Frequency Drive Gearbox: Part Description Part Number Part Description Part Number Oil Seal 86000000

More information

M 230/50/ T 400/50/3

M 230/50/ T 400/50/3 MCS-275 Miter Cold Saw 50000210M 230/50/1 50000210T 400/50/3 PARTS LIST Walter Meier (Fertigung) AG Bahnstrasse 24 8603 Schwerzenbach Switzerland Phone +41 44 806 47 48 Fax +41 44 806 47 58 jetinfo.eu@waltermeier.com

More information

Operating Instructions and Parts Manual Semi-Automatic Band Saw Model HBS-1321W

Operating Instructions and Parts Manual Semi-Automatic Band Saw Model HBS-1321W Operating Instructions and Parts Manual Semi-Automatic Band Saw Model HBS-1321W WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414471 Ph.: 800-274-6848 Revision

More information

RYOBI 10 in. TABLE SAW - MODEL NO. BT3000

RYOBI 10 in. TABLE SAW - MODEL NO. BT3000 FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR

More information

SECTION 10: PARTS. Headstock

SECTION 10: PARTS. Headstock 33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001

More information

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,

More information

Note: Parts without part numbers are for reference only and cannot be purchased individually.

Note: Parts without part numbers are for reference only and cannot be purchased individually. Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 between 7:30am and 5:30pm (CST), Monday through Friday. Having the Model Number and Serial Number of

More information

Operating Instructions and Parts Manual Model JWS-25X Shaper

Operating Instructions and Parts Manual Model JWS-25X Shaper Operating Instructions and Parts Manual Model JWS-2X Shaper JET 27 New Sanford Road LaVergne, Tennessee 7086 Part No. M-70809 Ph.: 800-27-688 Revision A2 02/20 www.jettools.com Copyright 20 JET Table Parts

More information

SECTION 9: PARTS. Main Breakdown -36- Model G5394 (Mfd. Since 11/08)

SECTION 9: PARTS. Main Breakdown -36- Model G5394 (Mfd. Since 11/08) SECTION 9: PARTS Main Breakdown 105 137 136 113-1 113 141 140 113-2 113-3 111 113-4 114 135 143 144 101 121-1 -1 116 147-1 121-2 115 120 121 107 108 164 162 160 158 138 109 127 126 160 158 123 127 123

More information

Disc, Belt, and Combination Disc/Belt Sanders

Disc, Belt, and Combination Disc/Belt Sanders This Manual is Bookmarked Operating Instructions Parts Manual Disc, Belt, and Combination Disc/Belt Sanders Models: 4200A, 4300A, 4400A 4200A Disc/Belt Sander 4300A 6 Inch Belt Sander 4400A 12 Inch Disc

More information

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP

More information

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or READ THIS FIRST Model G0728-31 ***IMPORTANT UPDATE*** For Machines Mfd. Since 01/17 and Owner's Manual Revised 09/14 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

More information

ST1014 PARTS ST1014 Headstock Breakdown

ST1014 PARTS ST1014 Headstock Breakdown ST1014 PARTS ST1014 Headstock Breakdown 112 114 23 104 105 108 102 106 20 19 21 22 101 100 103 111 38 14 15 37 46 44 47 45 107 93 39 41 40 67 110 109 74 75 76 11 12 13 9 8 6 10 31-2 31-3 3 2 7 26 24 31-1

More information

535-Manual. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.

535-Manual. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A. Pipe and Bolt Threading Machine -Manual Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 0 Cutter Assembly Stop Pin 0 Pin Reamer Assembly Carriage Assembly 0 Stop Screw

More information

Operating Instructions and Parts Manual. Horizontal Band Saw. Models HBS-916W; HBS-1018W

Operating Instructions and Parts Manual. Horizontal Band Saw. Models HBS-916W; HBS-1018W Operating Instructions and Parts Manual Horizontal Band Saw Models HBS-916W; HBS-1018W JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414468 Ph.: 800-274-6848 Revision H1 10/2018 www.jettools.com

More information

Headstock Gear System

Headstock Gear System Headstock Gear System (0000 Series Parts) 10 7 6 5 4 3, 2 16 11 12 13 14 15 9,8 1 90 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 91 93 94 95 96 97 98 99 100 102 104 106 108 109 92 101 103 105

More information

SECTION 9: PARTS G0513/G0513P/G0513ANV

SECTION 9: PARTS G0513/G0513P/G0513ANV SECTION 9: PARTS G0513/G0513P/G0513ANV Main 21 22 23 82-6 82-5 48 22 19 20 24 18 17 24 17 26 21 55 17 16 14 15 32 33 34 20 18 27 25 50 13 47 18 82-1 175 35 55A 49 9 11-1 10 46 45 11 12 44 176 39 38 37

More information

SECTION 9: PARTS. Accessories 2-1

SECTION 9: PARTS. Accessories 2-1 SECTION 9: PARTS Accessories 2-2 3 1 1-3 1-1 2 2-1 5 12 1-2 13 11 31 10 9 7 6 4 15 8 14 19 20 21 23 24 28 29 30 18 17 16 25 27 1 P0750G0001 3-JAW CHUCK ASSEMBLY 6" D1-5 SCROLL 13 P0750G0013 DRL CHK KEY

More information

25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.

25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List. 25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1

More information

RYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET

RYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding

More information

MODEL W " WIDE BELT SANDER PARTS LIST. Phone: On-Line Technical Support:

MODEL W  WIDE BELT SANDER PARTS LIST. Phone: On-Line Technical Support: MODEL W1710 24" WIDE BELT SANDER PARTS LIST Phone: 1-360-734-3482 On-Line Technical Support: tech-support@shopfox.biz COPYRIGHT SEPTEMBER, 2003 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS

More information

IMPORTANT: Chuck guard MUST be installed before drill chuck!

IMPORTANT: Chuck guard MUST be installed before drill chuck! IMPORTANT: Chuck guard MUST be installed before drill chuck! Model G7945/G7946 ***IMPORTANT UPDATE*** For Machines Mfg. Since December, 2012 and Owner's Manual Revised August, 2009 The following changes

More information

G0513X2 Main. G0513 Series Bandsaws (Mfd. Since 07/18) A V2

G0513X2 Main. G0513 Series Bandsaws (Mfd. Since 07/18) A V2 G0513X2 Main 55 17 48 7 16 55A 14 15 49 13 47 50 12 10 71 70 72 73 59 69 74 46 11 9 8 76 5 75 4 68 81 80 67 66 48 50 39 78 79 23 17-3 17-2 17-1 17-4 17-2 21 22 24 17-5 32 33 34 35 28 2 45 3 38 44 39 43

More information

Parts Catalog Admiral 28 Cylindrical Scrubber

Parts Catalog Admiral 28 Cylindrical Scrubber Parts Catalog Table of Contents Front bounce protection (97116834)... 4 Wheel suspension (97103725)... 6 Chassis (97115422)... 8 (97114763)... 10 Steering (97073738)... 12 Seat bracket (97118616)... 14

More information

Inspection. Assembly Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent.

Inspection. Assembly Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent. 6010-34 Inspection 3. Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent. 3. If spring test equipment is available, check the tension of each spring according to the specifications

More information

SECTION 9: PARTS Main

SECTION 9: PARTS Main SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21

More information

JWBS-16X WOODWORKING BANDSAW PARTS LIST

JWBS-16X WOODWORKING BANDSAW PARTS LIST JWBS-16X WOODWORKING BANDSAW 10000150XM 230/50/1 10000150XT 400/50/3 PARTS LIST Walter Meier (Fertigung) AG Bahnstrasse 24 8603 Schwerzenbach Switzerland Phone +41 44 806 47 48 Fax +41 44 806 47 58 jetinfo.eu@waltermeier.com

More information

READ THIS FIRST Models G0544/G5850Z/ G5851Z/G7213Z

READ THIS FIRST Models G0544/G5850Z/ G5851Z/G7213Z READ THIS FIRST Models // G5851Z/G7213Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 12/16 and Owner's Manual Revised 03/06 For questions or help with this product contact Tech Support at (570) 546-9663

More information

Model No: TC10. Parts Information: Tyre Changer - Automatic

Model No: TC10. Parts Information: Tyre Changer - Automatic Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10

More information

SECTION 10: PARTS Body

SECTION 10: PARTS Body -76- Model G0690/G0691 (Mfd. 6/15+) SECTION 10: PARTS 55V2 55-1 55-2 55-3V2 55-5 55-6 8 9 9 56 10 10 68 69 70 71 55-4 1 2 3 4 5 6 7 8 9 14 15 18 19 20 21 22 23 24 25 26 27 27 28 29 30 31 32 32 33 33 34

More information

Upper Wheel Assembly Exploded View

Upper Wheel Assembly Exploded View Upper Wheel Assembly Exploded View 36 Upper Wheel Assembly Parts List Index No. Part No. Description Size Qty 1... JWBS18-135...Hex Nut...5/8-18UNF, LH... 1 2... PM1800-102...Flat Washer... 1 3... BB-6204VV...Ball

More information

3850, Drum & Disc Brake Lathes. Parts Identification

3850, Drum & Disc Brake Lathes. Parts Identification 3850, 3860 Drum & Disc Brake Lathes Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for

More information

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or READ THIS FIRST Models G0453, G0453Z, G0454, G0454Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 09/17 and Owner's Manuals Revised 11/12 For questions or help with this product contact Tech Support at

More information

WOODWORKING BANDSAW M / T 230/50/1 / 400/50/3 PARTS LIST ERSATZTEILLISTE LISTE DE PIECES

WOODWORKING BANDSAW M / T 230/50/1 / 400/50/3 PARTS LIST ERSATZTEILLISTE LISTE DE PIECES JWBS-18 WOODWORKING BANDSAW 708750M / 708750T 230/50/1 / 400/50/3 PARTS LIST ERSATZTEILLISTE LISTE DE PIECES WMH Tool Group AG Bahnstrasse 24, CH 8603 Schwerzenbach www.wmhtoolgroup.ch; info@wmhtoolgroup.ch

More information

Parts Catalog Collector 34 Model Battery

Parts Catalog Collector 34 Model Battery Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-20)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering B (97104855)... 10 Travel drive, part 1

More information

SECTION 9: PARTS Stand/Brake/Coolant Pump

SECTION 9: PARTS Stand/Brake/Coolant Pump SECTION 9: PARTS Stand/Brake/Coolant Pump 8-1 18 3 4 2 8 7 20 6 5 19 7 1 17 23 42 22 21 25 24 31 62 26 27 29 28 30 55 5 56 57 32 33 66 60 61 63 64 22 9 54 53 2 10 10 2 11 10 16 9 58 10 67 10 34 65 35 36

More information

Trajan 270 European Style Parts and Service Manual Order Parts From

Trajan 270 European Style Parts and Service Manual Order Parts From www.trajansaw.com Trajan 270 European Style Parts and Service Manual Order Parts From www.bandsawparts.com 713-884-1101 1 198005 Body Frame 1 2 198008 Anchor Block 1 2A 198151 Anchor Plate 1 2B HT001 Round

More information

W1756/W " Wide-Belt Sander PARTS. Electrical & Controls PARTS -57-

W1756/W  Wide-Belt Sander PARTS. Electrical & Controls PARTS -57- Electrical & Controls -57- Electrical & Controls Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 X1756001 ELECTRICAL CONTROL BOX 18 XPS51M PHLP HD SCR M4-.7 X 30 2 X1756002 HINGE 19 X1756019

More information