Cutting Plotter. CE6000 Series. Specifications CE CE AMO. Item CE CE bit CPU Grit rolling type, digital servo drive

Transcription

1 Cutting Plotter. CE6000 Series Specifications Ite CE CE CPU 32-bit CPU Configuration Grit rolling type, digital servo drive CE CE AMO

2 Max. cutting area 375 x 50 *1 603 x 50 * x 50 *1 (Guaranteed cutting area) (356 x 2 *1 ) (584 x 5 *1 ) (1194 x 5 *1 ) Mark scanning argin Type 1 ark: Front 15, Rear 35, Left/Right 15 Type 2 ark: Front 17, Rear 37, Left/Right 15 (Length of edia up to 2 ) Nuber of push roller 2 rollers 2 rollers 4 rollers 4 rollers Max. cutting speed 600 /s (All directions) 900 /s (at 45º direction) 1000 /s (at 45º direction) Max. acceleration 21.2 /s 2 (at 45º direction) 13.9 /s 2 (at 45º direction) Max. cutting force (Instantaneous ax. force) 2.94 N (300 gf) in 31 steps (3.2 N (330 gf)) 4.41 N (450 gf) in 38 steps (4.9 N (500 gf)) 4.41 N (450 gf) in 38 steps (4.9 N (500 gf)) Miniu character size Approx. 5 alphanueric (varies depending on character font and type of edia) Repeatability Max. 0.1 in plot up to 2 *1 Mountable nuber of tools 1 tool Blade type Pen type Media type Perforation cutting Interface Buffer eory Coand sets Display Registration ark sensing syste Power source Power consuption Operating environent (Guaranteed accuracy) External diensions (W x D x H, Approx. []) Supersteel Oil-based ballpoint, Water-based fiber-tip pen Self-adhesive arking fil (vinyl, fluorescent, reflective) excluding highintensity reflective fil, up to 0.25 thickness Polyester fil, up to 0.25 thickness (unguaranteed accuracy) Yes (perfored by force control) RS-232C / USB2.0 (High Speed) 2 MB GP-GL / HP-GL eulation (Set by the enu or the coand, and selects fro GP-GL, HP-GL, or Auto detect) Graphic type LCD with backlight (240dots x 128dots) Scans the ark by optical sensor (ARMS5.0) 100 to 120, 200 to 240 V AC (Auto switch), 50 / 60 Hz 120 VA 10 to 35 ºC, 35 to 75 % R.H. (non-condensing) (16 to 32 ºC, 35 to 70 % R.H. (non-condensing)) 672 x 338 x x 593 x x 736 x 1250 Weight 10.5 kg 21 kg (including stand) 40.5 kg (including stand) Included software *2 Windows Driver, Graphtec Studio, Cutting Master 3, Plotter Controller Copatible OS *2 Windows 10 / 8.1 / 8 / 7 / Vista, Mac OS 10.6 to Copatible Standards Safety: cul / CE ark, EMC: VCCI Class A / FCC Class A / EN55022 Class A

3 *1 Operated with Graphtec specified cutting condition and the edia. In long-length cutting, the basket is used. *2 For ore inforation about copatibility of the OS or application software, please check the Graphtec website or contact your local representative of Graphtec. * Brand naes and product naes listed in this brochure are the tradearks or registered tradearks of their respective owners. Specifications are subject to change without notice. * The CE6000 has different specifications by destination.

4 FC 8600 Series Specifications Model FC FC FC FC FC CPU Configuration Drive ethod 32-bit CPU Grit rolling type Digital servo drive Max. cutting area (W 610 x x x x x 50 x L) (*1) Cutting area of guaranteed accuracy (*2) 590 x x x 10, 894 x x 10, 894 x x 10, 894 x 15 Mountable edia Min. 50 Min. 50 Min. 50 Min. 50 Min. 50 width Max. 770 Max. 920 Max Max Max Max. cross cut width Nuber of push rollers Max. cutting speed Axial acceleration Cutting force 2 rollers 2 rollers 3 rollers 3 rollers 4 rollers 1485 /s at 45 direction Max /s 2 (4 G) in 8 steps Max N (600 gf) in 48 steps Mechanical resolution Prograable resolution GP-GL: 0.1 / 0.05 / / 0.01, HP-GL : 0.025

5 Distance accuracy (*2) Max. 0.1 or 0.1 % of plotted length Repeatability (*2) Miniu character size Mountable nuber of tools Blade types Pen types Pouncing tool type Media types (*3) Copatible paper for pouncing Light pointer Cross-cutter Perforation cutting Registration ark sensing syste Standard interface Buffer eory Coand sets Condition settings Display Power source Power consuption Operating environent Guaranteed accuracy environent Max. 0.1 in plot up to 2 (excluding the expansion and contraction of the edia) Approx. 3 alphanueric (varies depending on character font and edia) 1 tool (cutting blade, plotting pen or pouncing tool) in standard; 2 tools (cutting blade and plotting pen) when second penholder (optional) is installed Supersteel (0.9 or 1.5 diaeter) Water-based fiber-tip pen, Oil-based ballpoint pen Steel pin 1.2 diaeter, required optional pouncing tool (PPA 33-TP12) Self-adhesive arking fil (vinyl, fluorescent, reflective, high-intensity reflective fil) up to 0.25 thick, Sandblast resist rubber up to 1 thick Regular paper fro 0.06 to 0.13 thick Built into the tool carriage Built into the tool carriage Supported (perfored by force control) Scans the ark by optical sensor (ARMS5.0), Segent area and Multiple-ark copensation, 4-points axis alignent, Auto ark detect USB2.0 (High speed), RS-232C, and Ethernet (10BASE-T/100BASE-TX) 2 MB GP-GL / HP-GL eulation (Set by enu or coand, and selects fro GP- GL, HP-GL, or Auto select) Dual configuration (save two (2) user settings with eight (8) separate condition setting for each user) Graphic type LCD (3-inch, backlight) 100 V to 240 V AC, 50 / 60 Hz Max. 160 VA 10 to 35 C, 35 to 75 % R.H. (non-condensing) 16 to 32 C, 35 to 70 % R.H. (non-condensing) External diensions (W x D x H) Approx x 715 x 1219 Approx x 715 x 1219 Approx x 715 x 1219 Approx x 715 x 1219 Approx x 715 x 1219 Weight Approx. 38 kg including stand Approx. 42 kg including stand Approx. 46 kg including stand Approx. 50 kg including stand Approx. 59 kg including stand Included software (*4) Windows driver, Plotter controller, Graphtec Studio, and Cutting Master 3

6 Copatible OS (*4) Windows 10 / 8.1 / 8 / 7 / Vista Mac OS 10.6 to Copatible Standards UL , cul, CE ark (Low voltage and EMC), KC ark (Low voltage and EMC) FCC-A, EN55022-A *1 When the 2nd pen holder is installed, the axiu cutting width is changed. (FC : 601, FC : 753, FC : 1053, FC : 1352, FC : 1613 ) *2 Operated with Graphtec specified edia and conditions. In long-length cutting, the basket is used. *3 When soe grades of high-intensity reflective fil is used, the using CB15UA/CB15UA-K30 blade and reinforcing the backing sheet of the edia are recoended. *4 For ore inforation about copatibility of the OS or application software, please check the Graphtec website or contact your local representative of Graphtec. Standard accessories Ite Q'ty Description Power cord Cutting blade holder Cutting blade Fiber-tip pen holder Water-based fiber-tip pen Stand Media stocker PG0039 PG The type of cord is different by destination 1 PHP33-CB09N-HS 1 CB09UB 1 PHP31-FIBER 1 KF700-BK (black ink) 1 Parts kit of stand 1 Set of stock rollers and ounting brackets (Installed on the stand) Parts kit for FC Parts kit for FC Basket PG Parts kit for FC PG0042 Parts kit for FC PG0043 Parts kit for FC USB cable 1 Cable for USB2.0, 2.9 long DVD-ROM 1 User anual (PDF forat), Windows driver, Software (Plotter controller, Graphtec Studio, Cutting Master 3) Manual 2 Quick start and safety guide Flatbed Cutting Plotter

7 FC 4500 Series Specfications Model nae FC FC Configuration Digital servo syste, Flatbed Media hold-down ethod Cling at Adhesive sheet / at Effective cutting area 590 x 430 (23.2 x 16.9 inch) 860 x 600 (33.8 x 23.6 inch) Mountable edia 500 (19.6 inch) 666 (26.2 inch)

8 (Y-axis direction) (Y-axis direction) Media type Marking fil (vinyl, fluorescent, and reflective) Stiff paper/card (for stencils, etc.) up to 0.5 thick *1 Polystyrene foa sheets up to 0.8 thick *2 Sandblast rubber sheets up to 1.0 thick *2 Microflute board (F/G grades) Clear sheets for plastic boxes High-intensity reflective fil *3 Maxiu cutting speed 750 /s (30 inch/s) (1 to 75 c/s in 23 steps) Cutting pressure Tool 1: Max N (600 gf), in 48 steps Tool 2: Max N (300 gf), in 30 steps Tool 1, Tool 2: Max N (600 gf), in 48 steps Miniu character size approx. 5 square (varies with the character font and edia) Mechanical resolution (5μ) Prograable resolution GP-GL ode: 0.1/0.05/0.025/0.01, HP-GL *4 : Distance accuracy Max 0.2% of the distance oved or 0.1, whichever is larger *5 Perpendicularity Max 0.3 / 430 Max 0.4 / 610 Repeatability Max 0.1 *5

9 Standard interfaces RS-232C, USB2.0 (High speed) Buffer eory 2 Mbyte Coand sets GP-GL and HP-GL *4 eulation (selected by enu) Nuber of tools 2 tools Cutter blade, pen, and tool types Cutter blade: supersteel Pen: oil-based ballpoint pen Creasing/scoring tool Others ARMS (Advanced Registration Mark Sensing Syste), Reverse-side cutting and creasing with ARMS, Copy function, Creasing function, Repeatedly cut function Power supply 100 to 240 VAC, 50/60 Hz (Auto switching) Power consuption Max. 120 VA Operating environent Teperature: +10 to +35 degree C (44 to 95 degree F), Huidity: 35 to 75% RH (non-condensing) Guaranteed accuracy environent Teperature: +16 to +32 degree C (55 to 90 degree F), Huidity: 35% to 70% RH (non-condensing) External diensions (W x D x H) *6 857 x 780 x 200 *7 (33.7 x 30.7 x 7.9 inch) 1172 x 962 x 200 *7 (46.1 x 37.9 x 7.9 inch)

10 Weight approx. 19 kg (42 lbs.) approx. 27 kg *10 (60 lbs.) Copatible OS *8 Windows 10 / 8.1 / 8 / 7 / Vista, Mac OS 10.6 to Certifications UL, cul, CE aking, FCC-A, EN55022-A, RoHS FC2250 Series Specfications Model nae FC VC 120VC 120MG FC2250- FC2250- FC VC Configuration Digital servo syste, Flatbed

11 Media hold-down ethod Vacuu suction *1 Magnetic Vacuu suction *1 Effective cutting area 610 x 920 (24.0 x 36.0 inch) 1200 x 920 (47.2 x 36.0 inch) 1740 x 920 (68.5 x 36.0 inch) Mountable edia 950 (37.4 inch)(y-axis direction) Media type 6Marking fil (vinyl, fluorescent, and reflective) Stiff paper/card (for stencils, etc.)up to 1.0 thick *2 Polystyrene foa sheets *3 Sandblast rubber sheets up to 1.0 thick *3 Microflute board (F/G grades) Clear sheets for plastic boxes High-intensity reflective fil *4 Maxiu cutting speed 400 /s (16 inch/s) (1 to 40 c/second in 40 steps) Cutting pressure Tool 1: Max. 4.9N (500 gf), in 40 steps Tool 2: Max. 9.8N (1 kgf), in 40 steps Miniu character size approx. 10 square (varies with the character font and edia) Mechanical resolution (2.5μ) Prograable resolution GP-GL ode: 0.1/0.05/0.025/0.01 HP-GL *5 : 0.025

12 Distance accuracy Max. 0.1% of the distance oved or 0.1, whichever is lager *6 Perpendicularity Max. 0.5 / 900 Repeatability Max 0.1 *6 Standard interfaces RS-232C, USB2.0 (Full speed) Buffer eory 2 Mbyte Coand sets GP-GL and HP-GL *5 eulation (selected by enu) Nuber of tools 2 tools Cutter blade, pen, and tool types Cutter blade: supersteel Pens: Water-based fiber-tip pen, oil-based ballpoint pen Creasing/scoring tool Others ARMS (Advanced Registration Mark Sensing Syste), Reverse-side cutting and creasing with ARMS, Copy function, Creasing function, Repeatedly cut function Power supply 100 to 240 VAC, 50/60 Hz (Auto switching) Power consuption Max. 120 VA Operating environent Teperature: +10 to +35 degree C (44 to 95 degree F), Huidity: 35 to 75% RH (non-condensing)

13 Guaranteed accuracy environent Teperature: +16 to +32 degree C (55 to 90 degree F), Huidity: 35% to 70% RH (non-condensing) 920 x 1285 x 2068 x 1285 x 857 * x 1285 x 944 *8 944 *8 (36.2 x 50.6 x (61.7 x 50.6 x 37.2 inch) (81.4 x 50.6 x External diensions 33.7 inch) 37.2 inch) (W x D x H) *7 The table cannot be tilted The table cannot be tilted 1568 x 987 x 1687 *9 (61.7 x 38.9 x 66.4 inch) The table cannot be tilted Weight approx. 58 kg *10 (128 lbs.) approx. 69 kg *10 (152 lbs.) approx. 74 kg *11 (163 lbs.) Copatible OS Windows 10 / 8.1 / 8 / 7 / Vista, Macintosh OS X *11 Certifications UL, cul, CE aking, FCC-A, EN55022-A, RoHSCling