Now with MAPS. Product Guide. Mimaki Advanced Pass System. 162 cm V1.2EU

Size: px

Start display at page:

Download "Now with MAPS. Product Guide. Mimaki Advanced Pass System. 162 cm V1.2EU"

Garry Osborne
5 years ago
Views:

1 Product Guide 162 cm 62cm 103 cm cm Now with MAPS Mimaki Advanced Pass System The information in this document is subject to change without notice V1.2EU

2 Terms of use The contents of this presentation are intended only for Mimaki authorized resellers. Authorized persons are not permitted to distribute, copy or change this presentation without explicit approval of Contents and technical explanations in this presentation are based on the test results achieved at Mimaki at the time of testing and are not a guarantee for performance. Substrates should be tested beforehand. In addition, the contents in this presentation do not lead to any legal obligations from Mimaki and Mimaki does not take any responsibility. Please verify in advance whether your intended prints will result in sufficient quality. Contents of this presentation are subject to change without prior notice for improvement. Compositors errors reserved. 2

CJV30 Design Continuous (overnight) printing Automatic change of double ink cartridge Newly developed reduced production time Automatic media

3 CJV30 Design Continuous (overnight) printing Automatic change of double ink cartridge Newly developed reduced production time Automatic media clamp function (Positions: off/low/middle/high) Achieve high quality Print Head Cutter head Tool holder Intelligent heater Automatic take-up device 3

4 Concept and features High quality printing, up to 1440 dpi same as the JV33 Series Speed comparable to JV33 max speed 17.5 m²/h, standard mode 11.9 m²/h Cutting speed up to 30 cm/s MAPS, Mimaki Advanced Pass System, included Printing with higher quality at higher speeds Available from firmware version 3.20 and higher 4

5 Concept and features Automatic Media Clamp function for automated switching from printing to cutting Continuous Crop Mark detection for accurate contour cutting and increases the productivity Cuts the image directly after printing using fast-drying SS21 solvent ink 5

6 Concept and features High density, fast drying white ink Widens the range of applications Simultaneous white and full color printing and white ink overlay function UISS Continuous printing with the Uninterrupted Ink Supply System Space savings up to 40% in relation to purchasing a separate printer and cutter. Bundled RIP, cutting and creation software Rasterlink Pro5 SG, FineCut, Simple Studio, Plug-ins for Adobe Illustrator and Corel Draw 6

Target markets CJV30-60 / CJV30-100 Unique in its size, new markets/users and affordable The CJV30-60/100 are unique in its sizes and target different markets than the CJV30-130 and CJV30-160.

7 Target markets CJV30-60 / CJV Unique in its size, new markets/users and affordable The CJV30-60/100 are unique in its sizes and target different markets than the CJV and CJV Examples of potential end users and applications are listed. 62cm Max. Print/Cut Width 610mm (24.0 ) 103 cm Max. Print/Cut Width 1020 mm (40.2 ) Media Width 620mm (24.4 ) Media Width 1030mm (40.6 ) Target users Car/van fleet hire Companies with large fleet Copy shops Design agencies Label producers Large retail chains Retail car dealers Schools and colleges Small screen printers Smaller sign makers Applications Vehicle graphics Vehicle graphics Posters, displays, stickers Displays for retail, stickers Labels In house production of in store communication Vehicle graphics In house signs/communication Posters, displays, stickers, labels Posters, displays, stickers, labels 7

Target markets CJV30-130 / CJV30-160 Print service providers and sign makers engaged in the production of large sized signs Target users Sign makers and print houses/ print service providers

8 Target markets CJV / CJV Print service providers and sign makers engaged in the production of large sized signs Target users Sign makers and print houses/ print service providers Applications Outdoor signs, POP displays, posters, floor and window signs, stickers and labels The CJV and CJV are typical products for professional sign makers and print houses. The CJV30 Series has many characteristics of the award winning JV33 series, making it a very strong printer/cutter cm 162 cm Max. Print/Cut Width 1361mm (53.6 ) Max. Print/Cut Width 1610 mm (63.4 ) Media Width 1371mm (54.0 ) Media Width 1620mm (63.4 ) 8

prints with excellent performance Also the design of ink

9 High speed print head Thanks to the combination of the high speed print head and the SS21 ink, CJV30 series prints with excellent performance Also the design of ink color arrangement contributes to high speed and high quality printing 9

10 CJV30 Printing speed CJV30-160(4C) 540x720,4P,Bi,Hi 540x1080,6P,Bi,Hi 720x1080,6P,Bi,Hi CJV30-130(4C) 540x720,4P,Bi,Hi 540x1080,6P,Bi,Hi 720x1080,6P,Bi,Hi 17, ,9 10,2 9,7 8, ,7 13,3 11,4 9,8 9, MAPS OFF MAPS ( 目安値 ) m²/h MAPS OFF MAPS ( 目安値 ) m²/h Optimum value Optimum value When printing in the lowest pass of each resolution with high speed scan, MAPS can be set only to minus 10

11 CJV30 Series adding MAPS The effect of MAPS The banding is reduced even in lower passes modes, meaning able to print without banding at higher speeds MAPS becomes available, by upgrading the F/W* 1 of the CJV30. MAPS reduces banding even printing in lower passes modes (high production mode). The customers who have not used lower passes modes because of the appearance of banding can increase productivity by taking advantage of MAPS. * 1 CJV30-130/160 Ver3.20 or later The effect of MAPS varies depending on print mode, print data, and media. MAPS does not guarantee the improvements of the whole image quality. 11

12 What is MAPS? JV33 MAPS The way to eject ink with MAPS is different then the normal pass The ordinary pass discharges ink droplets in a band, but when using MAPS, ink drops are fired sparsely at the boundaries of passes. This reduces banding which tends to appear when printing in high production (Low pass) mode MAPS: OFF (Normal) MAPS: ON Feed direction Ejects ink in bands Scan direction Ejects ink sparsely 12

13 Image quality comparison MAPS Off vs MAPS Optimum Print mode: 540x720, 4P, Bi, Hi Machine: CJV30-160(4C) Media: GPVC Ink: SS21 MAPS OFF: 17.5 m2 /h MAPS ON (-20%): 14 m2 /h C100Y100 C100Y100 Banding appears Banding is reduced 13

14 Print speed comparison MAPS: Off vs MAPS +50% CJV30-160(4C) 540x1080,12P,Bi,Hi 6,1 720x1080,12P,Bi,Hi 720x1440,16P,Bi,Hi 3,7 5 5,5 7,5 9,1 MAPS OFF MAPS (+50%) CJV30-130(4C) 540x1080,12P,Bi,Hi 720x1080,12P,Bi,Hi 720x1440,16P,Bi,Hi 3, ,8 8,7 4,8 7,2 5, Except for the minimum passes, MAPS can be set in plus. m2 /h m2 /h MAPS OFF MAPS (+50%) 14

15 Image quality comparison MAPS Off vs MAPS +50 Print mode: 540x1080, 12P, Bi, Hi Machine: CJV30-160(4C) Media: GPVC Ink:SS21 MAPS OFF: 6.1 m2 /h MAPS ON (+50%): 9.1 m2 /h No bleeding, and no banding Bleeds a little, but no banding 15

16 Example of the use of MAPS For the standard mode of 540x1080,12P,Bi,Hi (6.1m²/h) 540x1080,12P,Bi,Hi (6.1m²/h) Prints in high production mode without banding Increases productivity of standard mode and print without banding Prints in high quality mode without decreasing the print speed too much from standard mode Set MAPS-14%* in the print mode of 540x1080,6P,Bi,Hi Set MAPS+30% in the print mode of 540x1080,12P,Bi,Hi Set MAPS+50% in the print mode of 720x1440,16P,Bi,Hi Productivity: 10m²/h Productivity: 8m²/h Productivity: 5.5m²/h When printing in the lowest pass of each resolution with high speed scan, MAPS does not work when the value is set to 0% or more (plus). The set value of MAPS above is just examples. The value can be changed according to customer s situation. 16

17 Automatic Media Clamp function The automatic Media Clamp function contributes to perfectly printing on every inch of the media without handling it Also printing is done perfectly without the media peeling after cutting Position of clamps during printing During printing all clamps are down. The clamps can be adjusted in three levels (low/middle/high), depending on the thickness of the media. Automatic clamp lifting Position of clamps during cutting During cutting the clamps on both sides are down. For wider models (100, 130, 160) a third clamp in the middle is down. The clamps which are not needed are automatically lifted. 17

18 Automatic Media Clamp function Automatic switching from printing to cutting with the automatic Media Clamp function is handy and saves time. The fast drying SS21 ink and Automatic Media Clamp Function win every time. 18

Production and accuracy With Continuous Crop Mark Detection For precise contour cutting of printed images, such as stickers, the optical sensor detects register marks that are printed on the media.

19 Production and accuracy With Continuous Crop Mark Detection For precise contour cutting of printed images, such as stickers, the optical sensor detects register marks that are printed on the media. By continuously detecting a maximum of 4 register marks nested images in both X and Y axis direction can be cut aligning each image automatically. Correction on every data. Correction part Even when lamination is done after printing, the machine can automatically cut contours using this automatic correction function. High accuracy, no matter how many copies. 19

20 Half-Cut function A proprietary technology of Mimaki All Mimaki cutters include Mimaki s original Half-Cut function. This function produces a series of half- and die-cuts leaving a few connection points that keep the image in place. When the job is done the sticker/ image can be taken out easily or the complete sheet or roll can be sent to the customer. Various media without backing sheet can also be Half-Cut. Cut line Cutter Adhesive sheet Backing sheet A B A B A = Die cut (through cut) B = Half cut (cut through half the media) A Original die cutting makes different finish 20

White ink overlay printing The print head

and other colors, especially with lengthy

21 White ink overlay printing The print head can be separated for the use of white ink and other colors. It saves time printing simultaneously white and other colors, especially with lengthy prints. (6 color + white mode) 6 colour print 6 colour print + white mode 21

22 Ink types Fast drying Strong Odor SS21 Ink Fast drying, less bleeding, immediate cutting after printing* Weak Odor Slow drying ES3 Ink Less odor, can be used in an office Depending on media, cutting immediately after printing may cause shrinking 22

23 Three different color settings (SS21) 4 colour setting for higher speed M M C C Y Y K K M C Y K K Y C M 6 colour setting for higher quality M Lm C M Lc C K Y M C Lc K Y C M Lm 6 colour setting + white to widen your business opportunities M W C W Y Lm K Lc M C Y K Lc Lm W W 23

Automatic workflow Continuous automatic printing with UISS Long uninterrupted printing (880cc per color) in 4-color mode is possible with the UISS function, which is a successful feature of the

24 Automatic workflow Continuous automatic printing with UISS Long uninterrupted printing (880cc per color) in 4-color mode is possible with the UISS function, which is a successful feature of the Mimaki printers. When one of the two ink cartridges is empty, the ink supply is switched to the other cartridge automatically One roll of 50 meter media can be printed without manually changing ink cartridges. No banding anymore due to running out of ink while printing and no unfinished cartridges as a result of that. Unfinished ink cartridges can be used with UISS. 24

25 Automatic workflow Automatic take-up device The automatic take-up device enables fast and steady winding of the media. Media plate The media plate prevents media from lifting and jamming. It assures stable printing. Media Plate 25

core. Roll holder (compatible with 2 inch and 3 inch core

26 Easy operation Roll holder Setting the media is easy thanks to the roll folder, which can hold media with a 2 inch and 3 inch core. Roll holder (compatible with 2 inch and 3 inch core media) The roll stopper helps to set the media easily. Roll stopper 26

Cleaning System Automatically sends cleaning fluid to capping area The

27 Easy maintenance Thanks to a proven cleaning system, maintenance time is reduced and less ink is wasted. Cleaning System Automatically sends cleaning fluid to capping area The maintenance cleaning fluid is set on the rear of the machine and is automatically sent to the capping area. Cleaning Cartridge for pump cleaning 27

28 3 types of bundled software The included software meets professional demands from creation to printing and cutting. Simple studio Simple studio allows for easy printing and cutting without needing experience with Adobe Illustrator. Cut lines for contour cuts of images and photo data can be created. It is easy to create stickers with a high quality design. RasterLink Pro5 SG RasterLink Pro5 SG combines cutting data with printing data created by Illustrator. Image data and cutting data can be output to RIP in the same way FineCut outputs to a plotter. FineCut 8 FineCut 8 creates cutting data for contour cutting and imaging. It is easy to use plug-in cutting software for Illustrator and CorelDraw. 28

Specifications CJV30-60 CJV30-100 CJV30-130 CJV30-160 Maximum print / Cut width 610 mm (24.0") 1,020 mm (40.1") 1,361 mm (53.5") 1,610 mm (63.

29 Specifications CJV30-60 CJV CJV CJV Maximum print / Cut width 610 mm (24.0") 1,020 mm (40.1") 1,361 mm (53.5") 1,610 mm (63.3") Print resolution 540 dpi, 720 dpi, 1440 dpi Print mode 540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi (Scan x Feed) 720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi 1,440 x 1,440dpi Kind Exclusive solvent ink: SS21 ink, ES3 ink Ink 4-color mode: 440 cc cartridge x 2/color, 880 cc/color Capacity 6-color mode: 440 cc cartridge x 1/color, 440 cc/color Width 620 mm (24.4") 1,030 mm (40.5") 1,371 mm (53.9") 1,620 mm (63.7") Media Thickness Less than 1.0 mm Roll weight Less than 25 kg (55 lbs.) Roll diameter Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1") Maximum cutting speed 30 cm: 11.8"/s (42 cm: 1 6.5"/s at the angle of 45) Cutting force g Applicable tools Cutter, Water based ball-point pen, Oil based ball-point pen Media cutting Cutting in Y direction by cutter on the head Media heater Pre/print/post heater Media take-up device Roll take-up device (Standard), inside/outside selectable Command MRL-III, MGL-IIc2 Interface USB 2.0 VCCI class A, FCC class A, UL60950, Applicable standard CE Marking (EMC directive, low voltage directive), CB report Power AC100V~240V, Less than 1,380VA Operation environments 20 C~35 C, 35~65%RH (No condensation) Dimensions 1,524 x 739 x 1,424mm 1,934 x 739 x 1,424mm 2,289 x 739 x 1,424mm 2,538 x 739 x 1,424mm (W x D x H) (60" x 29.1" x 56.0") (76.1" x 29.1" x 56.0") (90.1" x 29.1" x 56.0") (99.9" x 29.1" x 56.0") Weight 110kg 130kg 145kg 160kg (242 lbs.) (286 lbs.) (319 lbs.) (352 lbs.) 29

30 Options and supplies CJV Series options CJV30-60 CJV CJV CJV Drying and exhaust unit OPT-J0177 OPT-J0176 OPT-J0129 OPT-J0130 Static cling prevention net OPT-J0187 OPT-J0186 OPT-J0139 OPT-J0140 Front cover OPT-J0185 OPT-J0184 OPT-J0183 OPT-J0182 Pen line rubber SPC-0557 SPC-0556 SPC-0555 SPC-0554 Pen line sponge SPC-0553 SPC-0552 SPC-0551 SPC-0550 Sheet basket OPT-J0191 OPT-J0190 OPT-J0189 OPT-J0188 Included items RasterLink Pro5 SG and Simple Studio Supplies Wiper kit (10 pcs) SPA-0134 Waste ink bottle 2L (1 pc) SPA-0117 MS cleaning cartridge (220 cc) SPA-0107 Cutter blade assy (1 pc) SPC-0294 Cutter holder (standard) (1 pc) SPA-0001 Cutter holder (1 pc) SPA-0090 Standard blade for vinyl (3 pcs) SPB-0030 Blade for vinyl and paper (3 pcs) SPB-0001 Blade for small character (3 pcs) SPB-0003 Blade for reflective sheet (2 pcs) SPB-0006 Blade for fluorescent type vinyl (3 pcs) SPB

Half-Cut or Through Cut Always on the Cutting Edge

Half-Cut or Through Cut Always on the Cutting Edge Mimaki s precise and reliable roll cutting plotters (Max. width 76 cm) (Max. width 130 cm) (Max. width 160 cm) PRODUCT GUIDE Terms of use The contents