smar Main Smar Products Main Smar Products Controllers - Remote Input and Output Didactic Products Junction Box 3 Ways Junction Box

Transcription

1 Main Smar Products Main Smar Products Junction Box JM1 Controllers - Remote Input and Output Didactic Products JM ma PD3 DF0 DC ma 3 Ways Junction Box Didactic Plant 4 Ways Junction Box CONF401 HSE Controller and WirelessHART Gateway FOUNDATION fieldbus / Remote Input and Output s DDCON 0 HART Configurator Didactical Kits Configurators HART Configurator DC303 HI311/HI321 HART Configurator PBI-PLUS SYSTEM302 HART-USB Advanced for PC Converters HI302 IF302 FI302 FRI302 IF303 FI303 FRI303 HCC301 ProcessView Supervision / Operation System SimulationView Control Strategy Simulator AssetView STANDALONE Asset Management System FP % Basic Accuracy Single Unit and Several Options for Sensors and Connections Input Signal Isolation PID Control Capability Advanced Diagnostics Largest Library of Function Block Execution Capacity Supported by DD, EDDL, and FDT/D Dual Channel Sensor Backup Three Bus Technology Options FP303 FOUNDATION / to Pneumatic Signal Converter Triple Channel Current Triple Channel FOUNDATION / FOUNDATION / to FOUNDATION / to Relay and Converters Current Converters Digital Input HART / Fieldbus HART / Current Converter Syscon Control Strategy and Industrial Network Configurator Process Equipment Database Plant Information Management Controllers LC700 CD600Plus smar Specifications and information are subject to change without notice. Up-to-date address information is available on our website. web: Universal Fieldbus Programmable Logical Controller 13 Digital Controller Copyright Smar International - all rights reserved. - October/2012 LogicView for FFB IEC61131 Programming Tool

2 Features Self-diagnosis; Dual channel; 12mA consumption; 2 analog input function blocks; Supports D and EDDL; Profile 3.0 improves interchangeability. Database Redundant s 2 Package Units Legacy Systems CLP F&G ESD TCP and RTU Printer (Controller with I/O modules) Flanged I.S. Discrete I/O Discrete I/O RD ma AS-i LD302 LD303 with Extended Probe WirelessHART with High Performance DT301 FY301 DT302 DT303 Intelligent Density / Concentration DP PROFIBUS DP and PA Density/Concentration Level 4-20 ma I.S. Fiscal Printer Router or Firewall Maintenance and Asset Management Integrated to Smar Profibus View and Simatic PDM; PA 11 Valve er with Remote Sensor Valve er FY400 Valve er with Auto Tuning ACP400 ACP ma TP290 ACP301 ACP302 TP301 ACP302 ACP303 TP302 ACP303 Pneumatic Linear Cylindric Actuador TP303 Pneumatic Rotary Cylindric Actuador Channel 1 Channel ma m tpu tp utss Outputs Gauge Economic Capacitive "In Line" LD301 TT383 TT400 HART SIS TT400 TT411 TT421 H1 I.S. FOUNDATION MVC (Multivariable Container) enabled. FY400 isc td rete Ou isc In D Execution of up to 29 external links; LAS (Link Active Scheduler) capability; TT302 TT303 rete Up to 20 function blocks; Fieldbus Foundation registered and ITK (Interoperability Test Kit) approved; LD400 LD400 FISCO 19 different types of function blocks for control strategies and advanced diagnostics; Guided Wave Level DC302 (Remote I/O) 12 ma consumption; Dynamic block instantiation improves interchangeability; HI302 HART/FOUNDATION Dual channel; LD1.0 FY301 Intrinsic Safety Barrier FOUNDATION fieldbus Self-diagnosis; ACP400 Redundant Controllers Supports D, DD and EDDL. FOUNDATION Setpoint generator function; Operation Pt00 included in sensor list; Redundant Controllers Multidrop operation mode; Maintenance Improved performance due to dedicated math coprocessor; Maximum, minimum and average input sensor selection, also working with two sensors simultaneously; Engineering Update output current in 0. s with 1. A/bit resolution; Match sensor (Callendar Van Dusen equation); Special 16-point sensor characterization; PID control function; Maintenance 2-wire, 4-20 ma output plus direct digital communication; All-in-one Station Excellent long term stability due to auto-zero at the input circuit;, Level and Flow Internet Universal input accepts several thermocouples, RTDs, mv and Ohm. HART - 4 to 20 ma Corporate Network Internet Signal simulation for loop tests; Sensor backup*; Auto Tuning Advanced Control Intrinsically safe certification; Three technology options: HART, F O U N D AT I O N fieldbus, and ; et Explosion proof and weather proof housing approved (IP66/68 ou IP66/68W); Write protection function; ern Small and lightweight; and Level Eth Alphanumerical LCD indication; EMC (Electromagnetic Compatibility) according to IEC : 1999, IEC : 1997 and IEC 61326: 2002; Alarm and Event Management Remote configuration via Hand-Held Terminal or via PC; Configurable local adjustment; Local zero and span adjustment; Configurable user unit; Fiber Optic Ring True non-interactive zero and span; Signal isolation; DF0 Built-in thermocouples and RTDs linearization; - MES (Manufacturing Execution System) - ERP (Enterprise Resource Planning) - CRM (Customer Relationship Management) 0.02% Accuracy; 4-20 ma Inputs Main Smar Products SYSTEM302 Architecture Eight Input Smart 12 WirelessHART Panel Mounting Head Mouting

3 Dimensional Drawing PLUG ALLOW 10 MM MINIMUM FOR LOCAL ZERO AND SPAN ADJUSENT WITH MAGNETIC TOOL. CONDUIT CONNECTION COMMUNICATIONS TERMIL PLUG WALL OR PANEL MOUNTING PIPE 2" MOUNTING BRACKET Functional Description FOR WALL MOUNTING 2 EXPANSION ANCHOR - S8 2 HEXAGON SCREW - 3/16 X70 FOR PANEL MOUNTING 2 BOLT AND NUTS -1/4 X30 NOT INCLUDED TT300 Series offers: ± 0.02% accuracy; Built-in thermocouples and RTDs linearization; Compact and lightweight; Interchangeable protocols. The Smar TT300 Series is a transmitter mainly intended for measurement of temperature using RTDs or thermocouples. However, it can also accept other sensors with resistance or mv output such as pyrometers, load cells, resistance position indicators, etc. The TT300 Series accepts up to two sensors and may operate in one of the modes below*: Single channel with single sensor measurement; Dual channel with dual sensor measurement (except HART protocol device); Single channel with two sensors (same type) in differential measurement; Single channel with two sensors (same type) in backup measurement; Single channel with two sensors (same type) with maximum, minimum or average signal selection (only HART protocol device). The Smar TT300 Series is a powerful and extremely versatile smart temperature transmitter. The digital technology used in the TT300 Series enables a single device to accept several types of sensors, wide ranges, single or multiple-ended measurement and an easy interface between the field and the control room. It also includes several features which reduce considerably the installation, operation and maintenance costs. The transmitter accepts two channels, i.e., two measurements. It reduces the cost per channel. The TT300 Series is suitable for direct field installation, being weather proof and explosion proof, as well as intrinsically safe, for use in hazardous areas. * Please consult your Smar representative to check the option availability. 3

4 Programming and Diagnostics TT300Series is available in three different technologies: HART (), FOUNDATION fieldbus (TT302), and (TT303). These instruments can be configured with Smar software and other manufacturer configuration tools. Local adjustment is available in all TT300 Series. It is possible to configure zero and span, setpoint and other control functions using the magnetic tool (SD1). With Smar AssetView, an user-friendly Web Tool, user can access the plant assets anywhere and anytime using an Internet browser. It is designed for management and diagnostics of field devices to ensure reactive, preventive, predictive and proactive maintenance. Local Adjustment HART - (HART protocol) can be configured by: Smar CONF401 for Windows; Smar DDCON0 for Windows; Smar HPC301 and HPC401 for several models of Palm; Other manufacturers' configuration tools based on DD (Device Description) or D (Device Type Manager), such as AMS, FieldCare, PACTware, HHT27, HHT37 and PRM Device Viewer. For management and diagnostics, AssetView ensures continuous information monitoring. DDCON0 - Configuration Software HPC401- Configuration Software FOUNDATION fieldbus - TT302 TT302 utilizes the FOUNDATION fieldbus H1 protocol, an open technology that allows any H1 enabled configuration tool to configure this device. Syscon (System Configuration Tool) is a software tool used to configure, and operate the field devices. Syscon offers efficient and friendly interaction with the user, using Windows. Configuration tools such as AMS, FieldCare and HHT37 can configure TT302 devices. DD (Device Description) and CF (Capability File) files can be downloaded at either the Smar or Fieldbus Foundation website. TT302 supports complex strategies configuration due to the high capacity and variety of dynamic instantiable function blocks. TT303 ( protocol) can be configured using configuring Smar Profibus View, Simatic PDM, FDT (Field Device Tool) and D (Device Type Manager) concept tools, such as FieldCare and PACTware. It can also be integrated by any PROFIBUS System using the GSD (General Station Description) file. also has quality and diagnostics information, improving plant management and maintenance. - TT303 Smar and SYSTEM302 are trademarks or registered trademarks of Smar Equipamentos Industriais Ltda. in Brazil and/or other countries. Other marks are the properties of their respective owners. 4

5 Wiring Connection HART - Power Supply and/or For an adequate communication, a minimun load of 20 is required between the configuration tool and the power supply. HHT based on Palm platform Laptop FOUNDATION fieldbus - TT302 Junction Box Shield Terminator Junction Box Shield Terminator Panel Analog Panel Analog PROFIBUS - TT303 DP/PA Coupler Junction Box Shield DP/PA Coupler Junction Box Shield Terminator Panel Analog Terminator Panel Analog Terminators * For some DP/PA couplers, the bus terminator is built-in.

6 Applications HART - Power Supply HART Control Room Plant Floor 20 DCS, computer with CONF401 or DDCON0 Pyrometer Load Cell FOUNDATION fieldbus - TT302 LD302 LD302 TT302 Process Power Supply + Bus Impedance TT302 D F 2 D F 3 D F 0 D F 6 2 HSE Link Device BT302 Bus Terminator BT302 Bus Terminator PROFIBUS - TT303 LD303 TT303 LD303 Process Power Supply DF73 D F 2 TT303 BT302 Bus Terminator PA DP BT302 Bus Terminator D F 0 D F 7 3 Profibus DP Master 6

7 Technical Characteristics Functional Specifications Inputs See table 1, 2 and 3. Output and Protocol Power Supply / Current Consumption Indicator Hazardous Area Certifications European Directive Information Zero and Span Adjustments Failure Alarm (Diagnostics) Limits HART : 2-wire, 4-20 ma according to MUR NE43 specification, with super-imposed digital communication (HART Protocol). FOUNDATION fieldbus and : Digital only. Complies with IEC : 2000 (H1): 31.2 kbit/s voltage mode, bus powered. HART : 12 to 4 Vdc. FOUNDATION fieldbus and : Bus powered: 9-32 Vdc. Quiescent current consumption: 12 ma. 4½-digit numerical and -character alphanumerical LCD indicator (optional). HART, FOUNDATION fieldbus and : Intrinsic Safety (FM, CSA, NEMKO, EXAM, CEPEL, NEPSI), Explosion Proof (FM, CSA, NEMKO, CEPEL), Dust Ignition Proof (FM), Non-incendive (FM) FOUNDATION fieldbus and : FISCO (FM, CSA, NEMKO, EXAM, CEPEL, NEPSI) and FNICO (FM, CSA, NEMKO, EXAM, CEPEL) Authorized representative in European Community Smar Gmbh-Rheingaustrasse 9-4 Bad Kreuzanach EMC Directive (89/336/EEC) - Electromagnetic Compatibility The EMC test was performed according to IEC standard: IEC61326:2002. For use only in industrial environment. ATEX Directive (94/9/EC) - Equipment and protective systems intended for use in potentially explosive atmospheres. This product was certified according European Standards at NEMKO and EXAM (former DMT). The certified body for manufacturing quality assessment is EXAM (number 018). LVD Directive 2006/9/EC - Electrical Equipment designed for use within certain voltage limits According the LVD directive Annex II the equipment under ATEX Electrical equipment for use in an explosive atmosphere directive are excluded from scope from this directive. Noninteractive, via local adjustment and digital communication. Detailed diagnostics through communication for all protocols. HART : In case of sensor or circuit failure, the self diagnostics drives the output to 3.6 or 21.0 ma, according to the user's choice and MUR NE43 specification. FOUNDATION fieldbus: For sensor circuit failures, events are generated and status is sent to link outputs. Detailed diagnostics are available in the contained parameters. : For sensor or circuit failures, status is sent to link outputs. Detailed diagnostics are available in the contained parameters. Ambiente: Storage: Digital Display: -40 o C to 8 o C -40 o C to 0 o C -20 o C to 80 o C -40 o C to 8 o C (-40 to 18 o F) (-40 to 212 ºF) (-4 to 176 ºF) (normal operation) (-40 to 18 o F) (without damage) 7

8 Technical Characteristics Turn-on Time Configuration Humidity Limits Damping Adjustment HART : Performs within specifications in less than seconds after power is applied to the transmitter. FOUNDATION fieldbus and : Performs within specifications in less than seconds after power is applied to the transmitter. HART : By digital communication (HART protocol) using the configuration software CONF401, DDCON0 (for Windows) or HPC301 and HPC401 (for Palm). It can also be configured using DD and FDT/D tools, and can be partially configured through local adjustment, since the transmitter is supplied with display. FOUNDATION fieldbus and : Basic configuration may be done using the local adjustment magnetic tool if device is supplied with display. Complete configuration is possible using configuration tools such as Syscon (System Configuration Tool), AMS, FieldCare and HHT37. The TT303 can be configured via Smar Profibus View and Simatic PDM using EDDL. 0 to 0% Relative Humidity. User configurable from 0 to 32 seconds (via digital communication). Performance Specifications Accuracy See tables 1, 2 and 3. Digital Stability ±0.1% of reading or 0.1 C (0.18 F), whichever is greater, for 2 years for RTDs; ±0.1% of reading or 0.1 C (0.18 F), whichever is greater, for 1 year for thermocouples. For a C variation: mv (-6 to 22 mv), TC (NBS: B, R, S,T): ± 0.03% of the input milivoltage or mv whichever is greater; mv (- to 0 mv), TC (NBS: E, J, K, N; DIN: L, U): ± 0.03% of the input milivoltage or 0.01 mv whichever is greater; Effect mv (-0 to 00 mv): ± 0.03% of the input milivoltage or 0.0 mv whichever is greater; Ohm (0 to 0 ), RTD (GE: Cu): ± 0.03% of the input resistence or 0.01 whichever is greater; Ohm (0 to 400 ), RTD (Edison Curve #7: Ni120; IEC: Pt0, Pt0; JIS: Pt0, Pt0): ± 0.03% of the input resistence or 0.04 whichever is greater; Ohm (0 to 2000 ), RTD (IEC: Pt00), RTD (IEC: Pt00): ±0.03% of the input resistence or 0.2 whichever is greater; Power Supply Effect Electromagnetic Interference Effect ± 0.00% of calibrated span per volt. Approved according to IEC 61326: Electrical Connection 1/2-14 NPT M20 X 1. PG 13. DIN 1/2-14 NPT X 3/4 NPT (316 SST) - with adapter 1/2-14 NPT X 3/4 BSP (316 SST) - with adapter 1/2-14 NPT X 1/2 BSP (316 SST) - with adapter Note: Explosion proof approvals do not apply to adapter, only to transmitter. 8

9 Technical Characteristics Physical Specifications Mounting Approximate Weights Can be attached directly to the sensor. With an optional bracket can be installed on a 2" pipe or fixed on a wall or panel. Without display and mounting bracket: 0.80 kg. Add for digital display: 0.13 kg. Add for mounting bracket: 0.60 kg. Control Functions Characteristics (Optional) RTD HART : PID Control, Alarm and Setpoint Ramp Generator. FOUNDATION fieldbus Function Blocks: Resource, Transducer, Display Transducer, Diagnostic Transducer, Analog Input, PID Control, Enhanced PID Control, Arithmetic, Integrator, Input Selector, Signal Characterizer, Splitter, Analog Alarm, Timer, Lead Lag, Output Selector/Dynamic Limiter, Setpoint Generator and Constant. Function Blocks: Physical Block, Transducer, Display Transducer and Analog Input. SENSOR TYPE RANGE C RANGE F THERMO- COUPLE SENSOR Cu GE Ni120 Edison Curve #7 Pt0 IEC Pt0 IEC Pt00 IEC Pt00 IEC Pt0 JIS Pt0 JIS Pt0 MILT Ni120 MILT Pt0 IEC Pt0 GOST Pt0 GOST Cu0 GOST Cu0 GOST B NBS E NBS J NBS K NBS N NBS R NBS S NBS T NBS L DIN U DIN RANGE mv Note: Additional information can be found in the Function Blocks Instruction Manual. -20 to 20-0 a to to to to to to a a a a a 80-0 a a to to to to to to to to to to 600 MINIMUM SPAN mv MINIMUM SPAN C 0 Inputs 2, 3 or 4 wires DIFFERENTIAL -4 a a to to to to to to a a a a a a a to to to to to to to to to to 1112 DIGITAL* ACCURACY % C DIGITAL ACCURACY* ± 1.0 Table 1 - Sensor Characteristics SENSOR RANGE C RANGE F MINIMUM SPAN C 0 C DIGITAL ACCURACY* ± to ± 0.02% or ± 2 µv 0 to 0 1 ± 0.02% or ± 0.01 Ohm mv - to ± 0.02% or ± µv Ohm 0 to ± 0.02% or ± 0.04 Ohm -0 to ± 0.02% or ± 0 µv 0 to ± 0.02% or ± 0.20 Ohm Table 2 - mv Sensor Characteristics Table 3 - Ohm Sensor Characteristics * Accuracy of value read on display and accessed by communication. The 4-20 ma accuracy is the digital accuracy ±0.03%. ** Not applicable for the first 20% of the range (up to 440 C). : Not applicable. 9 ± 0.1 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± ,2 + 0,13 ± 0,2 ± 0,2 ± 0,2 ± 0,1 ± 0,1 ± 0.** ± 0.2 ± 0.3 ± 0.6 ± 0. ± 0.4 ± 0.4 ± 0.1 ± 0.3 ± to a to 0-0 to to to a a 24-0 a 0-0 a 0-0 a 0-30 a a to to to to to to to to to to 800 RANGE Ohm -486 to a to to to to a a a a a a a to to to to to to to to to to 1440 MINIMUM SPAN Ohm ± 0. DIGITAL* ACCURACY % ± 1.0 ± 1.0 ± 1.0 ± ,0 + 0, + 1,0 + 1,0 + 1,0 + 1,0 + 1,0 ± 1.0** ± 1.0 ± 0.6 ± 1.2 ± 1.0 ± 2.0 ± 2.0 ± 0.8 ± 0.7 ± 2.

10 Ordering Code MODEL TEMPERATURE TRANSMITTER TT302 TT303 HART & 4 to 20 ma FOUNDATION fieldbus COD. Local Indicator 0 Without Indicator COD. Mounting Bracket 1 With Digital Indicator A 0 Flat, 304 SST bracket and 316 SST accessories 1 Carbon Steel Bracket Without Bracket SST Bracket COD. Set this code as "1" for and exclude for the others 7 Carbon Steel Bracket with 316 SST Fasteners COD. Electrical Connections 0 1/2-14 NPT (8) 1 1/2-14 NPT X 3/4 NPT (316 SST) - With adapter (9) 2 1/2-14 NPT X 3/4 BSP (316 SST) - With adapter (2) COD. Housing Material (13) (14) H0 H1 Aluminum (IP/TYPE) H2 Aluminium for saline atmosphere (IPW/TYPEX) (1) 316 SST (IP/TYPE) H3 316 SST for saline atmospheres (IPW/TYPEX) (1) COD. Identification Plate (12) I1 FM: XP, IS, NI, DI I4 EXAM (DMT): EEX-IA; NEMKO: EEX-D I2 NEMKO: Ex-d, Ex-ia (4) I CEPEL: Ex-d, Ex-ia I3 CSA: XP, IS, NI, DI () I6 Without Certification COD. Tag Plate (12) J0 With tag, when specified (Default) COD. L2 L3 Sensor Connection 2-wire 3-wire 3 1/2-14 NPT X 1/2 BSP (316 SST) - With adapter (2) A M20 x 1. () B PG 13. DIN (11) L4 4-wire LF Differential J1 Blank J2 According to user's notes Z According to user s notes COD. PID Configuration - (4) M0 With PID (Default) M1 Without PID COD. LCD1 Indication - (4) Y0 LCD1: Percentage (Default) Y3 LCD1: (Engineering Unit) Y1 LCD1: Current - I (ma) YU LCD1: According to user notes (1) (7) COD. LCD2 Indication - (4) Y0 LCD2: Percentage (Default) Y6 LCD2: (Engineering Unit) Y4 LCD2: Current - I (ma) YU LCD2: According to user notes (1) (7) COD. Painting P0 Gray Munsell N 6, Polyester (Default) P Yellow Polyester P3 Black Polyester P8 Without Painting P4 White Epoxy P9 Safety Blue Epoxy - Electrostatic Painting COD. Sensor Type T1 RTD Cu - GE T2 RTD Ni120 - Edison Curve #7 T3 RTD PT0 - IEC T4 RTD PT0 - IEC T RTD PT00 - IEC T6 RTD PT0 - JIS T7 RTD PT0 - JIS TU RTD PT00 - IEC (4) T8 2K OHM T9 400 OHM TA Thermocouple type B - NBS COD. Burn-out (4) BD Down Scale LD Double 2-wire (3) LB Backup TB Thermocouple type E - NBS TC Thermocouple type J - NBS TD Thermocouple type K - NBS TE Thermocouple type N - NBS TF Thermocouple type R - NBS TG Thermocouple type S - NBS TH Thermocouple type T - NBS TK Thermocouple type L - DIN TP Thermocouple type U - DIN TN 0 OHM TO Special OHM (4) BU H4 Copper Free Aluminium (IPW/TYPEX) (1) IE NEPSI: Ex-ia (3) IF CEPEL: Ex-d (4) IG CEPEL (Ex-d, Ex-ia) +IPW (6) Up Scale TQ 22 mv TR 0 mv TS 00 mv TT Special mv (4) TV RTD Pt0 MILT TW RTD Ni120 MILT TX RTD Pt0 - IEC (4) RTD Pt0 - GOST (4) 11 RTD Pt0 - GOST (4) 12 Cu0 - GOST (4) 13 Cu0 - GOST (4) H1 I1 J0 L2 M0 Y0 Y0 P8 T1 BU TT H1 I1 J0 L2 P8 T1 TT H1 I1 J0 L2 P8 T1 Note: (1) Values limited to 4 ½ digits; units limited to characters. (2) Not certified for use in hazardous locations. (3) Only available for TT302 and TT303. (4) Only available for. () Only available for and TT302. (6) Not available for Aluminum housing. (7) For, this code will be available only if the chosen sensor is Ohm or mv special. (8) Certified for use in hazardous locations (CEPEL, CSA, FM, NEPSI, NEMKO, EXAM). (9) Certified for use in hazardous locations (CEPEL, CSA, FM). () Certified for use in hazardous locations (CEPEL, FM, NEPSI, NEMKO, EXAM). (11) Certified for use in hazardous locations (CEPEL, NEPSI, NEMKO, EXAM). (12) Rectangular plate in 316 SST. (13) IPX8 tested in meters of water column for 24 hours. (14) Ingress Protection: Product CEPEL NEMKO / EXAM FM CSA NEPSI TT300 IP66/68W IP66/68W Type 4X/6 (6P) Type 4X IP67 (1) IPW/TYPE testes for 200 hours according to NBR 8094 / AS B 117 standard.

11 Features 12mA consumption; 2 analog input function blocks; Database Redundant s Supports D and EDDL; Profile 3.0 improves interchangeability. 2 Package Units Legacy Systems CLP F&G ESD TCP and RTU Printer (Controller with I/O modules) Flanged I.S. Discrete I/O RD400 LD302 LD303 with Extended Probe WirelessHART with High Performance DT301 FY301 DT302 DT303 Intelligent Density / Concentration DP PROFIBUS DP and PA Density/Concentration 4-20 ma AS-i Discrete I/O Router or Firewall Level 4-20 ma I.S. Fiscal Printer Valve er FY400 Valve er with Auto Tuning PA ACP400 ACP301 ACP302 TP301 ACP302 ACP303 TP302 ACP303 Pneumatic Linear Cylindric Actuador TP303 Pneumatic Rotary Cylindric Actuador Channel 1 Channel 8 11 Valve er with Remote Sensor 4-20 ma TP290 ACP301 TT383 TT400 HART SIS TT400 TT411 TT421 H1 I.S. Integrated to Smar Profibus View and Simatic PDM; Gauge Economic Capacitive "In Line" LD301 FOUNDATION Dual channel; ma m tpu tp utss Outputs Self-diagnosis; FY400 isc td rete Ou isc In D MVC (Multivariable Container) enabled. TT302 TT303 rete Execution of up to 29 external links; LAS (Link Active Scheduler) capability; LD400 LD400 FISCO Up to 20 function blocks; Fieldbus Foundation registered and ITK (Interoperability Test Kit) approved; Guided Wave Level DC302 (Remote I/O) 19 different types of function blocks for control strategies and advanced diagnostics; FY301 Intrinsic Safety Barrier FOUNDATION 12 ma consumption; Dynamic block instantiation improves interchangeability; LD1.0 HI302 HART/FOUNDATION Dual channel; Maintenance and Asset Management fieldbus Self-diagnosis; ACP400 Redundant Controllers Supports D, DD and EDDL. Setpoint generator function; Operation FOUNDATION Pt00 included in sensor list; Redundant Controllers Multidrop operation mode; Maintenance Improved performance due to dedicated math coprocessor; Maximum, minimum and average input sensor selection, also working with two sensors simultaneously; Engineering Update output current in 0. s with 1. A/bit resolution; Match sensor (Callendar Van Dusen equation); Special 16-point sensor characterization; PID control function; Maintenance 2-wire, 4-20 ma output plus direct digital communication; All-in-one Station Excellent long term stability due to auto-zero at the input circuit;, Level and Flow Internet Universal input accepts several thermocouples, RTDs, mv and Ohm. HART - 4 to 20 ma Corporate Network Internet Signal simulation for loop tests; Sensor backup*; Auto Tuning Advanced Control Intrinsically safe certification; Three technology options: HART, F O U N D AT I O N fieldbus, and ; et Explosion proof and weather proof housing approved (IP66/68 ou IP66/68W); Write protection function; ern Small and lightweight; and Level Eth Alphanumerical LCD indication; EMC (Electromagnetic Compatibility) according to IEC : 1999, IEC : 1997 and IEC 61326: 2002; Alarm and Event Management Remote configuration via Hand-Held Terminal or via PC; Configurable local adjustment; Local zero and span adjustment; Configurable user unit; Fiber Optic Ring True non-interactive zero and span; Signal isolation; DF0 Built-in thermocouples and RTDs linearization; - MES (Manufacturing Execution System) - ERP (Enterprise Resource Planning) - CRM (Customer Relationship Management) 0.02% Accuracy; 4-20 ma Inputs Main Smar Products SYSTEM302 Architecture Eight Input Smart 12 WirelessHART Panel Mounting Head Mouting

12 Features 12mA consumption; 2 analog input function blocks; Database Redundant s Supports D and EDDL; Profile 3.0 improves interchangeability. 2 Package Units Legacy Systems CLP F&G ESD TCP and RTU Printer (Controller with I/O modules) Flanged I.S. Discrete I/O RD400 LD302 LD303 with Extended Probe WirelessHART with High Performance DT301 FY301 DT302 DT303 Intelligent Density / Concentration DP PROFIBUS DP and PA Density/Concentration 4-20 ma AS-i Discrete I/O Router or Firewall Level 4-20 ma I.S. Fiscal Printer Valve er FY400 Valve er with Auto Tuning PA ACP400 ACP301 ACP302 TP301 ACP302 ACP303 TP302 ACP303 Pneumatic Linear Cylindric Actuador TP303 Pneumatic Rotary Cylindric Actuador Channel 1 Channel 8 11 Valve er with Remote Sensor 4-20 ma TP290 ACP301 TT383 TT400 HART SIS TT400 TT411 TT421 H1 I.S. Integrated to Smar Profibus View and Simatic PDM; Gauge Economic Capacitive "In Line" LD301 FOUNDATION Dual channel; ma m tpu tp utss Outputs Self-diagnosis; FY400 isc td rete Ou isc In D MVC (Multivariable Container) enabled. TT302 TT303 rete Execution of up to 29 external links; LAS (Link Active Scheduler) capability; LD400 LD400 FISCO Up to 20 function blocks; Fieldbus Foundation registered and ITK (Interoperability Test Kit) approved; Guided Wave Level DC302 (Remote I/O) 19 different types of function blocks for control strategies and advanced diagnostics; FY301 Intrinsic Safety Barrier FOUNDATION 12 ma consumption; Dynamic block instantiation improves interchangeability; LD1.0 HI302 HART/FOUNDATION Dual channel; Maintenance and Asset Management fieldbus Self-diagnosis; ACP400 Redundant Controllers Supports D, DD and EDDL. Setpoint generator function; Operation FOUNDATION Pt00 included in sensor list; Redundant Controllers Multidrop operation mode; Maintenance Improved performance due to dedicated math coprocessor; Maximum, minimum and average input sensor selection, also working with two sensors simultaneously; Engineering Update output current in 0. s with 1. A/bit resolution; Match sensor (Callendar Van Dusen equation); Special 16-point sensor characterization; PID control function; Maintenance 2-wire, 4-20 ma output plus direct digital communication; All-in-one Station Excellent long term stability due to auto-zero at the input circuit;, Level and Flow Internet Universal input accepts several thermocouples, RTDs, mv and Ohm. HART - 4 to 20 ma Corporate Network Internet Signal simulation for loop tests; Sensor backup*; Auto Tuning Advanced Control Intrinsically safe certification; Three technology options: HART, F O U N D AT I O N fieldbus, and ; et Explosion proof and weather proof housing approved (IP66/68 ou IP66/68W); Write protection function; ern Small and lightweight; and Level Eth Alphanumerical LCD indication; EMC (Electromagnetic Compatibility) according to IEC : 1999, IEC : 1997 and IEC 61326: 2002; Alarm and Event Management Remote configuration via Hand-Held Terminal or via PC; Configurable local adjustment; Local zero and span adjustment; Configurable user unit; Fiber Optic Ring True non-interactive zero and span; Signal isolation; DF0 Built-in thermocouples and RTDs linearization; - MES (Manufacturing Execution System) - ERP (Enterprise Resource Planning) - CRM (Customer Relationship Management) 0.02% Accuracy; 4-20 ma Inputs Main Smar Products SYSTEM302 Architecture Eight Input Smart 12 WirelessHART Panel Mounting Head Mouting

13 Main Smar Products Junction Box Didactic Products JM1 JM400 PD ma 4-20 ma 3 Ways Junction Box 4 Ways Junction Box Didactic Plant Didactical Kits Configurators s CONF401 DDCON 0 HI311/HI321 PBI-PLUS HART Configurator HART Configurator HART Configurator HART-USB for PC Advanced Converters HI302 HCC301 IF302 FI302 FRI302 FP302 IF303 FI303 FRI303 FP303 FOUNDATION / to Pneumatic Signal Converter Triple Channel Current to FOUNDATION / Converters Triple Channel FOUNDATION / to Current Converters FOUNDATION / Relay and Digital Input HART / Fieldbus HART / Current Converter Controllers LC700 CD600Plus Universal Fieldbus Programmable Logical Controller Digital Controller 13

14 Main Smar Products Controllers - Remote Input and Output DF0 DC303 DC302 HSE Controller and WirelessHART Gateway FOUNDATION fieldbus / Remote Input and Output SYSTEM302 ProcessView Supervision / Operation System SimulationView Control Strategy Simulator AssetView STANDALONE Asset Management System Syscon Control Strategy and Industrial Network Configurator Process Equipment Database Plant Information Management LogicView for FFB IEC61131 Programming Tool smar Specifications and information are subject to change without notice. Up-to-date address information is available on our website. web: Copyright Smar International - all rights reserved. - October/2014