Temperature transmitter with local display RIT 261

Size: px
Start display at page:

Download "Temperature transmitter with local display RIT 261"

Transcription

1 Technical Information TI 091R/2/ae Temperature transmitter with local display RIT 261 Universal field mounted transmitter provides an exceptional backlit temperature indication with five large digits and bargraph Features and benefits Economical temperature transmitter with process value display High accuracy, 0.08% of span Breakdown information in event of a sensor break or short circuit enables a quick maintenance intervention Up to.75 kv galvanic isolation from sensor input to the output Long term stability, < 0.05% / year Electromagnetic compatibility to IEC 6126 for use in noisy environments Customer specific linearization Hazardous area approvals for high safety: - FM, CSA and ATEX 5-digit display, 1 (26 mm) character height Trend bargraph in 10% increments Rear illumination without additonal power supply for easy reading in all weather conditions NEMA X (IP 66) ingress protection for field installation Application areas Plant and panel manufacturers Process monitoring Suitable for RTD thermometers, thermocouples TC, Ohm and mv inputs 2-wire transmitter with a linear temperature proportional analog output PC or HART programmable adds flexibility for the configuration The Power of Know How

2 I O RIT 261 Operation and system construction Measurement principle System component without own transmitter supply e.g. recorder, display, PLC Active barrier RN 221N RIT 261 as front end display Hazardous area Temperature sensor Example of a temperature application area Temperature transmitter for electronic monitoring, transforming and display in industrial temperature measurement. The device measures an analog measurement signal and indicates this on the display. The display is connected in a to 20 ma current loop and also derives the required power from the loop. Measurement system The temperature display (RIT 261) consists of two main components: a) The microprocessor controlled display with rear illuminated LCD. The set up for measurement range, decimal point, offset and lock is done either in the factory or in an opened housing using the three push buttons (+, -, E) inside the unit. Set up can be accomplished during operation. b) A temperature transmitter (itemp PCM TMT 181 or itemp HART TMT 182) as a two wire transmitter with an analog output, measurement inputs for resistance thermometers and resistance transmitters in 2- - or -wire connection modes, thermocouples and voltage transmitters. Set up is done either in the factory or using the appropriate configuration kit. Input values Measurement type Measurement range Temperature (linear temperature transmission), resistance and voltage Dependent on the sensor connection, the temperature transmitter monitors various measurement ranges (see chart, top of page ). 2

3 Input type Resistance thermometer (RTD) Input Description Measurement range limits Min. span To IEC 751 (a = ) Pt 100 Pt 500 Pt 1000 to IEC to F (-200 to +850 C) -28 to +82 F (-200 to +250 C) -28 to +82 F (-200 to +250 C) To DIN 760 (a = ) Ni 100 Ni 500 Ni 1000 to DIN to +82 F (-60 to +250 C) -76 to +02 F (-60 to +150 C) -76 to +02 F (-60 to +150 C) Resistance thermometer ( ) Designation Resistance ( ) Thermocouple (TC) Input To NIST Monograph 175, IEC 58 To ASTM E988 To DIN 710 Voltage transmitter (mv) Connection type: 2-, -, or -wire Software compensation of cable resistance is possible on 2-wire connection TMT 181, 0 to 20 TMT 182, 0 to 0 Maximum sensor cable resistance: 11 per cable on - or -wire connection Sensor current: TMT ma TMT ma Measurement range limits 10 to to 2000 Description B (PtRh0-PtRh6) E (NiCr-CuNi) J (Fe-CuNi) K (NiCr-Ni) N (NiCrSi-NiSi) R (PtRh 1-Pt) S (PtRh 10-Pt) T (Cu-CuNi) C (W5Re-W26Re) D (WRe-W25Re)) L (Fe-CuNi U (Cu-CuNi) 1 Measurement range limits +2 to +08 F (0 to C) -5 to +182 F (-270 to C) -6 to F (-210 to C) -5 to F (-270 to +172 C) -5 to +272 F (-270 to +100 C) -58 to +21 F (-50 to C) -58 to +21 F (-50 to C) -5 to +752 F (-270 to +00 C) +2 to +208 F (0 to +220 C) +2 to +52 F (0 to +295 C) -28 to F (-200 to +900 C -28 to F (-200 to +600 C) Cold junction: internal or external (Pt 100), 2 to 176 F (0 to 80 C) Cold junction accuracy: ± 1.8 F (1 C) Sensor current, 0 na 1 High measuring error increases for temperatures lower than 572 F (00 C) Min. span Min. span 900 F (500 C) 900 F (500 C) 900 F (500 C) 900 F (500 C) 900 F (500 C Designation Millivolt transmitter (mv) Measurement range limits TMT 181, -10 to +100 mv TMT 182, -10 to +75 mv Min. span 5 mv 5 mv Output values Output signal Transmission performance Breakdown information (to NAMUR NE ) Source impedance Filter Current requirement Current limit Analog to 20 ma, 20 to ma Temperature linear, resistance linear, voltage linear Breakdown information is created when the measuring information is invalid or not present anymore and gives a complete listing of all errors occuring in the measuring system. Under ranging: standard,.8 ma Over ranging: standard, 20.5 ma Sensor break, sensor short circuit low: to NAMUR NE,.6 ma Sensor break, sensor short circuit high: to NAMUR NE, 21.5 RIT with TMT 181: maximum (V power supply - 8V - 2V) / 0.025A e.g. (2V - 8V - 2V) / 0.025A = 50 Ω RIT with TMT 182: maximum (V power supply V - 2V) / 0.022A e.g. (2V V - 2V) / 0.022A = 77. Ω RIT with TMT 181: 1 st order digital filter, 0 to 8 seconds RIT with TMT 182: 1 st order digital filter, 0 to 100 seconds.5 ma RIT with TMT 181: 25 ma RIT with TMT 182: 2 ma

4 Power up delay Galvanic isolation seconds (during power up sequence I a =.8 ma) U = 2 kv AC (input/output) with TMT 182 Power supply Electrical connections to 5 V 11.5 to 0 V Ex to 20 ma TC 6 2-wire -wire -wire RTD W RTD W RTD W Wire terminals Plug on screw terminals: terminal size 16 AWG (1.75 mm 2 ). External ground terminal for 1 AWG (2.5 mm 2 ). Power supply Ripple Cable entries RIT with TMT 181: U b = 10 to 5 VDC, polarity protected RIT with TMT 182: U b = 1.5 to 5 VDC, polarity protected Allowable ripple U SS V at U b 1 V, f max. = 1 khz Two 1/2 NPT cable entries or two Pg 11 cable glands Accuracy Response time Reference conditions Measurement deviation 1 second Calibration temperature: +7. F ± 9 F (+2 C ± 5 C) Description Measurement accuracy * Pt 100, Ni F (0.2 C) or 0.08% Resistance RTD Pt 500, Ni F (0.5 C) or 0.20% Pt 1000, Ni F (0. C) or 0.12% K, J, T, E, L, U typically 0.9 F (0.5 C) Thermocouple TC N, C, D typically 1.8 F (1 C) S, B, R typically.6 F (2 C) Measurement accuracy * Measurement range Resistance transmitter (Ω) ± 0.1 Ω or 0.08% 10 to 00 Ω ± 0.15 Ω or 0.12% 20 to 2000 Ω Voltage transmitter (mv) ± 20 µv or 0.08% -10 to +75 mv * % refers to the preset measurement range. The largest value is valid Power supply influence Ambient temperature influence (temperature drift) ± 0.01%/V deviation from 2 V (details are refered to Full Scale Deviation) Resistance thermometer (RTD): T d = ± (8. ppm/ F x max. meas. range ppm/ F x present measuring range + 55 ppm/ F) x ϑ Resistance thermometer Pt 100: T d = ± (8. ppm/ F x (range end value + 200) ppm/ F x present measuring range + 55 ppm/ F) x ϑ Thermocouple TC: T d = ± (8. ppm/ F x max. meas. range ppm/ F x present measuring range + 55 ppm/ F) x ϑ ϑ = Deviation of ambient temperature from the reference conditions (7. F ±9 F)

5 Long term stability Load influence Influence of cold junction Reference conditions (display) Measurement deviation (display) 0.18 F/year (0.1 C/year) (under reference conditions) or 0.05%/year (under reference conditions, % refers to the set up meas. range. The largest value is valid.) ±0.02%/100 W (all details are refered to Full Scale Deviation) Pt 100 IEC 751 CI.B (internal cold junction for thremocouples) T = 77 F (25 C) < 0.1% Full Scale Deviation Application conditions Installation Installation area: wall or stand pipe mounted, see accessories Installation positioning: no limitation Environmental conditions Ambient temperature Storage temperature Climatic classification Moisture condensation Ingress protection Vibration protection Shock resistance EMC/immunity - to +10 F (-20 to +60 C). For hazardous areas, refer to Ex certification. -1 to +158 F (-25 to +70 C) As per IEC , Class D1 Allowed NEMA X (IP 66) 0.7g / 5 to 100 Hz according to IEC Nm housing / Nm glass according to EN 5001 The device meets all requirements listed under IEC 6126 Amendment 1, 1998 and NAMUR NE 21. This recommendation is an uniform and practical way of determining whether the devices used in laboratory and process control are immune to interference with an objective to increase its functional safety. Discharge of static electricity IEC kv cont., 8 kv air Electromagnetic fields IEC to 1000 Hz, 10 V/m Burst (signal) IEC kv, 2 kv (B), self recorvery TMT 182, 2 kv Transient voltage IEC kv unsym. / 0.5 kv sym. HF coupling IEC to 80 MHz, 10 V Mechanical construction Dimensions inches (mm) 6.89" (175) 2.56" (65).15" (80).21" (107) 1.57" (0) 6.2" (16) The temperature transmitter (TMT 181 or TMT 182 is fitted behind the hinged display cover. Internal dimensions: H = 2. (60 mm), W = 5.5 (10 mm). Housing can be lead sealed to prevent unauthorized entry. GORE-TEX filter for pressure compensation located left of the cable entries. 2.05" (52) E + - Enter push button (E) Selection push buttons (+, -) 5

6 Weight Approximately 1.8 lb (80 g) Materials Aluminum pressure die-cast epoxy coated housing with glass insert Wall/stand pipe mounting kit with tensioning band, 0 SS Display and operating system Display elements Display: 5-digit LCD, 1 (26 mm) character height, rear illuminated. Bargraph display in 10% increments, markers for over / under range display. Display range: to Offset: to Operation: push button operation (-, +, E) integrated in the unit, access when unit is opened Signals: measurement range over / under value Rear illumination: illumination brightness increases with an increase in loop current Display set-up (changes to factory default) Temperature transmitter set-up (changes to factory default) CE mark Approvals Other standards and guidelines Using the three front mounted pushbuttons allows changes to be made without the need for extra tooling. Open hinged cover to access pushbuttons. Set-up can be changed during unit operation. Parameter set-up: measurement range, decimal point, offset, set-up lock code (release code) Configuration kit for itemp PCP TMT 181: configuration kit TMT 181A-VP, set-up using PC software (ReadWin 2000) and PC interface connection cable TTL -/- RS 22 with plug. Configuration kit for itemp HART TMT 182: interface cable Commubox FXA 191, PC operating software COMMUWIN II, or ReadWin 2000, hand held programming unit HART DXR 275. Parameter set-up: sensor type and connection mode, measurement units ( C/ F), measurement range, internal/external compensation point, cable resistance compensation on 2-wire connection, fault condition. Output signal ( to 20/20 to ma), digital filter (damping), offset, measurement point tagging (8 characters), output simulation. Certificates and approvals By attaching the CE mark, confirms that the instrument fulfills all the requirements of the relevant EC directives FM approved intrinsically safe, NI, DIP; Class I, II, III; Division 1, 2; Groups A-G CSA approved intrinsically safe Class I, Division 1, 2; Groups A-D ATEX II 2(1)G EEx ia IIC T6/T5 Details regarding the availability of the intrinsically safe versions (FM, CSA, ATEX) can be obtained from. Relevant data for application protection can be found in separate documentation, available upon request (XA 01R/09/ae). IEC 60529: Degree of protection for housing (IP code) IEC 61010: Safety requirements for electrical measurement, control and lab instrumentation IEC 6126: Eletromagnetic compatibility (EMC requirements) NAMUR: Standarization association for measurement control and control in chemical and pharmaceutical industries ( NEMA: Standardization association for the electrical industry Supplemental documentation RIT 261 temperature display operation manual RIA 261 field display technical information TMT 181 itemp head transmitter technical information TMT 181 itemp operation manual TMT 182 itemp head transmitter technical information TMT 182 itemp operation manual Commuwin II operating software KA 125R/09/a TI 08R/2/ae TI 070R/2/ae KA 11R/09/a TI 078R/2/ae KA 12R/09/a BA 12F 6

7 Ordering information Application / set-up questionnaire Questionnaire itemp temperature transmitter Customer specific setup Standard setup Sensor TC ( ) B ( ) C ( ) D ( ) E ( ) J ( ) K ( ) L ( ) N ( ) R ( ) S ( ) T ( ) U RTD ( ) Pt100 ( ) Pt500 ( ) Pt1000 ( ) Ni100 ( ) Ni500 ( ) Ni1000 ( ) 2 wire ( ) wire ( ) wire Unit ( ) C ( ) F Range Low scale High scale,, Note!: Range and min. span (see Technical data) Expanded setup Reference junction ( ) internal ( ) external (only TC) [ F; 0 to 80 C] Compensation wire resistance Failure mode ( ) <.6 ma ( ) > 21.0 ma [ Ohm] (only RTD 2 wire) [0...0 Ohm] (only HART) Output ( )...20 ma ( ) ma [ 0, 1, 2,..., 8s] [ 0, 1, 2,..., 100s] (only HART) Offset, [ F / C PCP: 8 char. TAG HART: 8 char. Descriptor: 16 char. Default settings in bold RIT 261 Order code RIT Certification A Nonhazardous area version B ATEX II 2(1)G EEx ia IIC T6 C FM IS, NI, DIP Cl I, II, III; Div. 1, 2; Grps A-G D CSA IS, Cl I, Div. 1, 2; Grps A-D, T6 2 Cable entries 1 Two Pg 11 (M20) cable glands 2 Two 1/2 NPT cable entries Accessories 1 Without accessories 2 Mounting bracket for wall/pipe mounting Built-in temperature head transmitter A PCP head transmitter TMT 181 B HART protocol TMT 182 head transmitter 5 Configuration transmitter connection A -wire standard factory configuration RTD -wire configuration RTD -wire configuration 2 RTD 2-wire configuration 1 TC thermocouple configuration 6 Temperature sensor configuration A Standard factory set-up, Pt Pt 100, -28 to F (-200 to +850 C) 2 Ni 100, -76 to +82 F (-60 to +250 C) Pt 500, -28 to +82 F (-200 to +250 C) Ni 500, -76 to +02 F (-60 to +150 C) 5 Pt 1000, -28 to +82 F (-200 to +250 C) 6 Ni 1000, -76 to +02 F (-60 to +150 C) 7 Resistance, 10 to 00 Ohm, minimum span 10 Ohm 8 Resistance, 10 to 2000 Ohm, minimum span 100 Ohm B Thermocouple Type B,+2 to +08 F (0 to C) C Thermocouple Type C, +2 to +208 F (0 to +220 C) D Thermocouple Type D, +2 to +52 F (0 to +295 C) E Thermocouple Type E, -5 to +182 F (-270 to C) J Thermocouple Type J, -6 to F (-210 to C) K Thermocouple Type K, -5 to F (-270 to +172 C) L Thermocouple Type L, -28 to F (-200 to +900 C) N Thermocouple Type N, -5 to +272 F (-270 to +100 C) R Thermocouple Type R, -58 to +21 F (-50 to C) S Thermocouple Type S, -58 to +21 F (-50 to C) T Thermocouple Type T, -5 to +752 F (-270 to +00 C) U Thermocouple Type U, -28 to F (-200 to +600 C) V Voltage transmitter, -10 to 100 mv, minimum span 5 mv 7 Configuration A Standard configuration, 2 to 212 F (0 to 100 C) B Customer specific measurement range C Customer specific expanded thermocouple set-up D Customer specific expanded RTD set-up 8 Mode A Standard model B Factory calibration certificate, 5 measuring points 7

8 Accessories Mounting bracket B 2.99" (76) 1.57" (0) A 5.51" (10) 6.77" (172) (B) Wall and stand pipe mounting kit (position B), with tensioning band (position A) Order number: SONDST-AA (for North American region) Options (depending on transmitter used): TMT 181A-VP Configuration kit itemp PCP Set-up program (ReadWin) and PC interface cable (TTL/RS 22C) for setting up the temperature transmitter installed (if the factory default parameters are to be changed) Or: Configuration itemp HART TMT 182 using HART protocol. The measured values can also be checked using the HART protocol. There are two possibilities using HART communication: Operation using the HART hand held DXR 275 communicator. Operation with PC operating software ReadWin 2000, Commuwin II or a HART modem (Commubox FXA 191). For application and selection assistance, in the U.S. call 888-ENDRESS For total support of your installed base, 2 hours a day, in the U.S. call Visit us on our web site, United States, Inc. 250 Endress Place Greenwood, IN 61 Phone: (17) ENDRESS FAX: (17) Canada Canada Ltd. 10 Graham s Lane Unit 1, Burlington ON, L7S 1W Phone: (905) FAX: (905) Mexico Paseo del Pedregal No. 610 Col. Jardines del Pedregal 01900, Mexico D.F. Mexico Phone: (525) FAX: (525) TI 091R/2/ae/ , Inc.

Process display RIA 261

Process display RIA 261 Technical Information TI 083R/24/ae Process display RIA 261 Digital loop powered field display for 4 to 20 ma current loops Features and Benefits Loop powered display, no additional power supply cable

More information

Temperature transmitter itemp RTD DIN rail TMT 127

Temperature transmitter itemp RTD DIN rail TMT 127 Technical information TI 095R/24/ae Nr. 510 06165 Temperature transmitter itemp RTD DIN rail TMT 127 Pt100 transmitter for an economical, high accuracy temperature monitoring. Fixed range measurement,

More information

Temperature head transmitter itemp TC TMT 188

Temperature head transmitter itemp TC TMT 188 Technical information TI 077R/24/ae No.: 510 06145 Temperature head transmitter itemp TC TMT 188 Universal head transmitter for thermocouples for an economical, high accuracy temperature monitoring. Fixed

More information

Temperature transmitter itemp PCP DIN rail TMT 121

Temperature transmitter itemp PCP DIN rail TMT 121 Technical information TI 087R/09/en 510 03671 Temperature transmitter itemp PCP DIN rail TMT 121 Universal temperature transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage

More information

Temperature head transmitter itemp PCP TMT 181

Temperature head transmitter itemp PCP TMT 181 Technical information TI 070R/09/en Mat.-Nr.: 510 01110 Temperature head transmitter itemp PCP TMT 181 Universal head transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage

More information

itemp HART DIN rail TMT112

itemp HART DIN rail TMT112 Temperature transmitter itemp HART DIN rail TMT112 Universal temperature transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage transmitters, incorporating HART protocol Application

More information

0 2 1 â Ó. itemp HART TMT182. Technical Information

0 2 1 â Ó. itemp HART TMT182. Technical Information Technical Information itemp HART TMT182 Temperature head transmitter Head transmitter for resistance thermometers (RTD), thermocouples (TC), resistance and voltage transmitters (mv), HART -protocol, for

More information

0 2 1 â Ó. itemp HART TMT182. Technical Information

0 2 1 â Ó. itemp HART TMT182. Technical Information Technical Information itemp HART TMT182 Temperature head transmitter Head transmitter for resistance thermometers (RTD), thermocouples (TC), resistance and voltage transmitters (mv), HART -protocol, for

More information

PROGRAMMABLE FIELD TEMPERATURE TRANSMITTER

PROGRAMMABLE FIELD TEMPERATURE TRANSMITTER Configuration Code TM01 Series 642 Programmable HART Field Temperature The Series 642 programmable HART field temperature transmitter is a 2-wire unit with analog output. It includes input for RTDs; resistance

More information

Temperature head transmitter itemp PCP TMT 181

Temperature head transmitter itemp PCP TMT 181 Technical information TI 070R/09/en Mat.-Nr.: 510 01110 Temperature head transmitter itemp PCP TMT 181 Universal head transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage

More information

itemp PA TMT184 Technical information

itemp PA TMT184 Technical information Technical information itemp PA TMT184 Temperature head transmitter with PROFIBUS-PA interface. Supply and digital communication using PROFIBUS-PA, for installation in a Form B sensor head. Features and

More information

â Ó itemp TC TMT128 Technical information DIN rail mounted Temperature Transmitter for Thermocouples (TC)

â Ó itemp TC TMT128 Technical information DIN rail mounted Temperature Transmitter for Thermocouples (TC) Technical information itemp TC TMT128 DIN rail mounted Temperature Transmitter for Thermocouples (TC) Application Temperature transmitter with fixed measuring ranges for converting TC input signals into

More information

Temperature Transmitters - DIN Rail Mounted

Temperature Transmitters - DIN Rail Mounted XTD Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction

More information

Temperature Transmitters - Head Mounted

Temperature Transmitters - Head Mounted XTH Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction

More information

Temperature Transmitter itemp RTD DIN rail TMT 127

Temperature Transmitter itemp RTD DIN rail TMT 127 Technical Information TI 095R/09/en No. 51004790 Temperature Transmitter itemp RTD DIN rail TMT 127 Temperature Transmitter for Pt100 Resistance Thermometer Application Temperature transmitter with fixed

More information

â itemp Pt100 TMT127 Technical information Pt100 transmitter for DIN rail mounting for high accuracy temperature monitoring

â itemp Pt100 TMT127 Technical information Pt100 transmitter for DIN rail mounting for high accuracy temperature monitoring Technical information itemp Pt100 TMT127 Pt100 transmitter for DIN rail mounting for high accuracy temperature monitoring Application Temperature transmitter with fixed measuring range for converting a

More information

Transmitter. Configuration Code TM01 Series 440 Programmable RTD Temperature Transmitter. Application Areas. Features and Benefits

Transmitter. Configuration Code TM01 Series 440 Programmable RTD Temperature Transmitter. Application Areas. Features and Benefits Configuration Code TM01 Series 440 Programmable RTD Temperature Transmitter The Series 440 programmable RTD temperature transmitter is a 2-wire transmitter with an analog output. It has measurement input

More information

SITRANS T measuring instruments for temperature

SITRANS T measuring instruments for temperature Overview Our field devices for heavy industrial use HART, Universal 4 to 20 ma, universal Field indicator for 4 to 20 ma signals The temperature transmitter SITRANS TF works where others feel uncomfortable.

More information

itemp HART TMT142 Technical Information

itemp HART TMT142 Technical Information Technical Information itemp HART TMT142 Universal temperature transmitter for resistance thermometers, thermocouples, resistance transmitters and voltage transmitters, adjustable via HART protocol Application

More information

Digital Temperature Transmitters Model T12.10, Universally Programmable, Head Mounting Model T12.30, Universally Programmable, Rail Mounting

Digital Temperature Transmitters Model T12.10, Universally Programmable, Head Mounting Model T12.30, Universally Programmable, Rail Mounting Electrical Temperature Measurement Digital Temperature Transmitters Model T12.10, Universally Programmable, Head Mounting Model T12.30, Universally Programmable, Rail Mounting WIKA Data Sheet TE 12.03

More information

itemp HART TMT142 Technical Information

itemp HART TMT142 Technical Information Technical Information itemp HART TMT142 Temperature transmitter for resistance thermometers, thermocouples, resistance transmitters and voltage transmitters, adjustable via HART protocol Application Temperature

More information

Temperature Measurement

Temperature Measurement Overview Application transmitters can be used in all industrial sectors. Due to their compact size they can be installed in the connection head type B (DIN 4729) or larger. The following sensors/signal

More information

Paperless Recorder PR20

Paperless Recorder PR20 Technical Information TI 075R/24/ae Paperless Recorder PR20 Economical and time saving recorder operates without the need for paper or pens and is exceedingly simple to operate Application Areas Technological

More information

Advanced Paperless Recorder eco-graph a

Advanced Paperless Recorder eco-graph a Technical Information TI 097R/4/ae Advanced Paperless Recorder eco-graph a User friendly paperless recorder, for recording analog signals, counter values and quantities. Swift overview using the integrated

More information

TT2780. Temperature head transmitter For resistance thermometers Pt100, settable using a PC, for installation in a sensor head Form B, BUZ, BUZ-H

TT2780. Temperature head transmitter For resistance thermometers Pt100, settable using a PC, for installation in a sensor head Form B, BUZ, BUZ-H Postal address: House address Fon (+49) 0 22 42-8703-0 Postbox 1261 Löhestr. 37 Fax (+49) 0 22 42-8703-20 http: // www.tematec.de 53759 Hennef 53773 Hennef e-mail: team@tematec.de TT2780 Data Sheet TT2780

More information

Temperature measurement TMD 832 head transmitter

Temperature measurement TMD 832 head transmitter Technical information TI 062R/09/en Mat.-Nr. 510 00782 Temperature measurement TMD 832 head transmitter SMART head transmitter with HART protocol for RTD, Thermocouple and mv input signals Applications

More information

Level Limit Switch nivotester FTL 325 P

Level Limit Switch nivotester FTL 325 P Technical Information TI 350F/24/ae Level Limit Switch nivotester FTL 325 P With intrinsically safe signal circuit for connection to the Liquiphant and Soliphant measuring sensor Application Level limit

More information

TMT122 DIN rail itemp HART

TMT122 DIN rail itemp HART Operating Instructions TMT122 DIN rail itemp HART Temperature Transmitter BA155R/24/ae/10.04 51006562 2 Endress+Hauser Table of Contents Table of Contents Safety Message.............................. 4

More information

Technical Information itemp TMT180

Technical Information itemp TMT180 TI00088R/09/EN/14.16 71315611 Technical Information itemp TMT180 Temperature head transmitter for resistance thermometers Pt100 Configurable using a PC, for installation in a terminal head, form B Application

More information

RTD Temperature Sensor omnigrad T -TSM 480, TR 480. Hygienic RTD sensor with Pt 100, class A TSM 480 with electronics programmable via PC

RTD Temperature Sensor omnigrad T -TSM 480, TR 480. Hygienic RTD sensor with Pt 100, class A TSM 480 with electronics programmable via PC Technical Information TI 273T/02/en 60021667 RTD Temperature Sensor omnigrad T -TSM 480, TR 480 Hygienic RTD sensor with Pt 100, class A TSM 480 with electronics programmable via PC Application The Omingrad

More information

RMA42. Technical Information

RMA42. Technical Information Technical Information RMA42 Process transmitter with control unit Digital process transmitter for mounting on a top-hat rail for monitoring and visualizing analog measured values Application Plant and

More information

Temperature Measurement Transmitters for mounting in sensor head

Temperature Measurement Transmitters for mounting in sensor head Siemens AG 015 Overview SITANS TH00 two-wire system, universal, HAT Application SITANS TH00 transmitters can be used in all industrial sectors. Due to their compact size they can be installed in the connection

More information

Temperature Measurement Transmitters for mounting in sensor head

Temperature Measurement Transmitters for mounting in sensor head Siemens AG 015 SITANS TH00 two-wire system, universal Overview Application SITANS TH00 transmitters can be used in all industrial sectors. Due to their compact size they can be installed in the connection

More information

E+H Model PT TMT184. Temperature head transmitter with PROFIBUS-PA -interface. Supply and digital communication using PROFIBUS-PA

E+H Model PT TMT184. Temperature head transmitter with PROFIBUS-PA -interface. Supply and digital communication using PROFIBUS-PA Digital Transmitters AccuTru is pleased to offer the high quality Endress + Hauser line of temperature s along with. During the past ten years the company evolved from being a manufacturer of sensors for

More information

C330 / C330X PC-Programmable Universal, 2-wire Transmitter

C330 / C330X PC-Programmable Universal, 2-wire Transmitter C330 / C330X PC-Programmable Universal, 2-wire Transmitter The IPAQ C330 transmitter is a universal, isolated, temperature transmitter with additional voltage and resistance input. Its robust design and

More information

omnigrad T - TSM 480, TR 480. Technical Information. RTD Temperature Sensor Hygienic design TSM 480 with electronics programmable via PC

omnigrad T - TSM 480, TR 480. Technical Information. RTD Temperature Sensor Hygienic design TSM 480 with electronics programmable via PC Technical Information omnigrad T - TSM 480, TR 480 RTD Temperature Sensor Hygienic design TSM 480 with electronics programmable via PC Application areas The onmigrad T easytemp TSM 480 and TR 480 thermometers

More information

Universal Intelligent 2-wire DIN Rail Transmitters

Universal Intelligent 2-wire DIN Rail Transmitters Universal Intelligent 2-wire DIN Rail Transmitters IPAQ-L is a universal and intelligent 2-wire DIN rail transmitter for temperature and other measurement applications. IPAQ-LX is the Intrinsic Safe version

More information

Technical Information RMA42

Technical Information RMA42 TI00150R/09/EN/05.16 71315973 Products Solutions Services Technical Information RMA42 Process transmitter with control unit Digital process transmitter for monitoring and visualizing analog measured values

More information

JUMO dtrans T02 Programmable 4-wire Transmitter (Smart Transmitter)

JUMO dtrans T02 Programmable 4-wire Transmitter (Smart Transmitter) JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net

More information

JUMO dtrans T02 Programmable 4-wire Transmitter (Smart Transmitter)

JUMO dtrans T02 Programmable 4-wire Transmitter (Smart Transmitter) JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net

More information

STT 3000 Series STT170 SMART TEMPERATURE TRANSMITTER Models STT171, STT173, STT17H, STT17F, STT17C

STT 3000 Series STT170 SMART TEMPERATURE TRANSMITTER Models STT171, STT173, STT17H, STT17F, STT17C STT 3000 Series STT170 SMART TEMPERATURE TRANSMITTER Models STT171, STT173, STT17H, STT17F, STT17C 6/07 PRODUCT SPECIFICATION SHEET OVERVIEW The Honeywell STT170 series of programmable temperature transmitters

More information

ph / ORP Measurement mypro CPM 431

ph / ORP Measurement mypro CPM 431 Technical Information TI 173C/24/ae ph / ORP Measurement mypro CPM 431 Two-wire transmitter for ph and ORP with HART communication for use in hazardous or non-hazardous areas Areas of application The analysis

More information

SITRANS T measuring instruments for temperature

SITRANS T measuring instruments for temperature SITRANS T measuring instruments for temperature /2 Product overview /6 Transmitter for mounting in sensor head /6 SITRANS TH100, two-wire system (Pt100) /9 SITRANS TH200, two-wire system universal /15

More information

TF 02 / TF 02-Ex. Head mounted temperature transmitters, FOUNDATION Fieldbus (H1), Pt 100 (RTD), thermocouples, 1 or 2 independent channels

TF 02 / TF 02-Ex. Head mounted temperature transmitters, FOUNDATION Fieldbus (H1), Pt 100 (RTD), thermocouples, 1 or 2 independent channels TF 0 / TF 0-Ex Head mounted temperature transmitters, FOUNDATION Fieldbus (H), Pt 00 (RTD), thermocouples, or independent channels 0/-8.5 EN Input Resistance thermometer (,, wire circuit) Thermocouples

More information

600T Series Transmitters. Specification Sheet. Model 653T Electronic temperature transmitter (PC programmable)

600T Series Transmitters. Specification Sheet. Model 653T Electronic temperature transmitter (PC programmable) Specification Sheet 600T Series Transmitters Model 65T Electronic temperature transmitter (PC programmable) High flexibility and wide rangeability Single transmitter accepts RTD/THC/mV/ohm Galvanically

More information

Temperature Measurement

Temperature Measurement Siemens AG 015 / Product overview Transmitters for mounting in sensor head /4 SITRANS TH100 two-wire system (Pt100) /8 SITRANS TH00 two-wire system universal /15 SITRANS TH00 two-wire system universal,

More information

Advanced Temperature Transmitter

Advanced Temperature Transmitter No. SS2-ATT082-0100 Advanced Temperature Transmitter ATT082 HART protocol Model Application Temperature transmitter with 2 input channels and HART communication for the conversion of different input signals

More information

HART field temperature transmitter Models TIF50, TIF52, TIF62

HART field temperature transmitter Models TIF50, TIF52, TIF62 Electrical temperature measurement HART field temperature transmitter Models TIF50, TIF52, TIF62 WIKA data sheet TE 62.01 Applications Plant construction Process engineering General industrial applications

More information

STT 3000 Series STT170 SMART TEMPERATURE TRANSMITTER Models STT171, STT173, STT17H, STT17F, STT17C

STT 3000 Series STT170 SMART TEMPERATURE TRANSMITTER Models STT171, STT173, STT17H, STT17F, STT17C STT 3000 Series STT170 SMART TEMPERATURE TRANSMITTER Models STT171, STT173, STT17H, STT17F, STT17C 34-TT-03-07 3/06 PRODUCT SPECIFICATION SHEET OVERVIEW The Honeywell STT170 series of programmable temperature

More information

SINEAX V 624 Programmable Temperature Transmitter for RTD and TC inputs

SINEAX V 624 Programmable Temperature Transmitter for RTD and TC inputs SINEAX V 6 for rail mounting in housing P/7 or P/7 St 00 II () GD Application SINEAX V 6 (Figs. and ) is designed for measuring temperature in combination with thermocouples or resistance thermometers.

More information

Radar Level Measurement micropilot FMR 130 for stilling wells

Radar Level Measurement micropilot FMR 130 for stilling wells Technical Information TI 258F/24/ae Radar Level Measurement micropilot FMR 130 for stilling wells Smart transmitter for non-contact measurement in metallic by-pass pipes and stilling wells Suitable for

More information

High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals

High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals Accessories High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building

More information

C520 / C520X /C520S / C520XS HART Compatible, Universal, Dual-input 2-wire Transmitters

C520 / C520X /C520S / C520XS HART Compatible, Universal, Dual-input 2-wire Transmitters C520 / C520X /C520S / C520XS HART Compatible, Universal, Dual-input 2-wire Transmitters The 520 transmitters are universal, isolated, dual-input temperature transmitters with additional voltage and resistance

More information

TEK-TEMP 2100A. Explosion-Proof Temperature Transmitter. TEMPERATURE. Technology Solutions

TEK-TEMP 2100A. Explosion-Proof Temperature Transmitter.   TEMPERATURE. Technology Solutions Technology Solutions TEK-TEMP 2100A Explosion-Proof Temperature Transmitter TEMPERATURE www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction Tek-Trol s Explosion-Proof

More information

HART Compatible Intelligent 2-wire DIN Rail Transmitters

HART Compatible Intelligent 2-wire DIN Rail Transmitters HART Compatible Intelligent 2-wire DIN Rail Transmitters MESO-L is a Smart and universal 2-wire DIN Rail transmitter for temperature and other measurement applications. MESO-LX is the Intrinsic Safe version

More information

Head mounted Temperature Transmitter TF02/TF02-Ex

Head mounted Temperature Transmitter TF02/TF02-Ex Data Sheet Head mounted Temperature Transmitter TF0/TF0-Ex FOUNDATION Fieldbus H, Pt 00 (RTD), thermocouples, or independent channels Input Resistance thermometer (-, -, -wire circuit) Thermocouples Resistance

More information

Plug-in module SIRAX V 606, 1 or 2 channels Programmable Temp. Transmitter for RTD and TC inputs

Plug-in module SIRAX V 606, 1 or 2 channels Programmable Temp. Transmitter for RTD and TC inputs Plug-in module, or channels Application The programmable transmitter (Fig. ) is designed for measuring temperature in combination with thermocouples or resistance thermometers. Thermocouple non-linearities

More information

Two-Wire Programmable Transmitter for:

Two-Wire Programmable Transmitter for: TM Smart Process Instrumentation Revision 2 Two-Wire Programmable Transmitter for: Industrial Thermocouple or RTD Temperature Measurements Highlights: Exceptional speed and accuracy Guaranteed measurement

More information

MCR-FL-TS-LP-I-EX SIL IEC Programmable Intrinsically Safe Loop-Powered Temperature Measuring Transducer With HART Protocol

MCR-FL-TS-LP-I-EX SIL IEC Programmable Intrinsically Safe Loop-Powered Temperature Measuring Transducer With HART Protocol SIL IEC 6 508 Programmable Intrinsically Safe Loop-Powered Temperature Measuring Transducer With HART Protocol Data Sheet 0068_en_03 PHOENIX CONTACT 0-07-09 Description Temperature FL ϑ Universal PC programmable

More information

Temperature Transmitters TMT 136, TMT 137

Temperature Transmitters TMT 136, TMT 137 Technical Information TI 066R/09/en Part No. 51000855 Temperature Transmitters TMT 136, TMT 137 For Pt100 Resistance Thermometers 2-wire head transmitter Standard- and instrinsically safe versions Head

More information

Universal Intelligent 2-wire In-head Transmitters

Universal Intelligent 2-wire In-head Transmitters Universal Intelligent 2-wire In-head Transmitters Actual size IPAQ-H is a universal and intelligent 2-wire In-head transmitter for temperature and other measurement applications. IPAQ-HX is the Intrinsic

More information

Universal Intelligent 2-wire DIN Rail Transmitters

Universal Intelligent 2-wire DIN Rail Transmitters Universal Intelligent 2-wire DIN Rail Transmitters IPAQ-L is a universal and intelligent 2-wire DIN rail transmitter for temperature and other measurement applications. IPAQ-LX is the Intrinsic Safe version

More information

Technical Information Barrier RB223

Technical Information Barrier RB223 TI00132R/09/EN/13.14 71275790 Products Solutions Services Technical Information Barrier RB223 One or two-channel barrier Loop-powered barrier for the safe separation of 4 to 20 ma standard signal circuits

More information

Rosemount 148 Temperature Transmitter

Rosemount 148 Temperature Transmitter Product Data Sheet Rosemount 148 Rosemount 148 Temperature Transmitter Provides an installation-ready solution for temperature monitoring applications using Complete Point Solutions (CPS) Increases measurement

More information

Multifunction Intelligent 4-wire Isolated Signal Conditioner

Multifunction Intelligent 4-wire Isolated Signal Conditioner Multifunction Intelligent 4-wire Isolated Signal Conditioner IPAQ-4L is a fully universal and intelligent 4- wire (mains powered) transmitter for temperature measurement and signal conditioning applications.

More information

Temperature Measurement

Temperature Measurement Siemens AG 017 / Product overview Transmitters for mounting in sensor head /4 SITRANS TH100 two-wire system (Pt100) /8 SITRANS TH00 two-wire system universal /15 SITRANS TH00 two-wire system universal,

More information

The Rosemount 848T Wireless Temperature Transmitter

The Rosemount 848T Wireless Temperature Transmitter Rosemount 88T Family February 0 The Rosemount 88T Wireless Temperature Transmitter The Rosemount 88T is the premier choice for Wireless High Density measurements. Four independently configurable inputs

More information

Conductivity Measuring Cells for High-Temperature Applications ConduMax H CLS 16

Conductivity Measuring Cells for High-Temperature Applications ConduMax H CLS 16 Technical Information TI 7C//ae Conductivity Measuring Cells for High-Temperature Applications Two-electrode measuring sensors with fixed cable or connector version with integrated temperature sensor Cell

More information

MODEL: B6U-B B6-UNIT. [2] LCD DISPLAY 0: Without 1: With

MODEL: B6U-B B6-UNIT. [2] LCD DISPLAY 0: Without 1: With Field-mounted Two-wire Signal Conditioners B6-UNIT 8: TIIS flameproof (CE not available) Confirm selectable combinations of approval and wiring conduit types in the table. 2-WIRE UNIVERSAL TEMPERATURE

More information

Temperature Measurement

Temperature Measurement Siemens AG 00 - Transmitter, two-wire system and - Field indicator for 4 to 0 ma Overview Our field devices for heavy industrial use HART, Universal 4 to 0 ma, universal Field indicator for 4 to 0 ma signals

More information

itemp TMT82 Technical Information Dual-input temperature transmitter with HART protocol

itemp TMT82 Technical Information Dual-input temperature transmitter with HART protocol Technical Information itemp TMT82 Dual-input temperature transmitter with HART protocol Applications Temperature transmitter with 2 input channels and HART communication for the conversion of different

More information

HART Compatible Intelligent 2-wire In-head Transmitters

HART Compatible Intelligent 2-wire In-head Transmitters HART Compatible Intelligent 2-wire In-head Transmitters Actual size MESO-H is a Smart and universal 2-wire Inhead transmitter for temperature and other measurement applications. MESO-HX is the Intrinsic

More information

STT 3000 Smart Temperature Transmitter Series STT170 Specifications

STT 3000 Smart Temperature Transmitter Series STT170 Specifications STT 3000 Smart Temperature Transmitter Series STT170 Specifications Model STT171, STT173, STT17H, STT17F, STT17C 34-TT-03-07 November 2010 Overview STT17H Features The Honeywell STT170 series of programmable

More information

Analogue Temperature Transmitter

Analogue Temperature Transmitter TE 19.01 Electrical Temperature Measurement Analogue Temperature Transmitter Configurable Ranges, Head Mounting for Pt100 Resistance Thermometers for Thermocouples Applications Plant construction Power

More information

Temperature Measurement

Temperature Measurement Temperature Measurement SITANS T00 Overview Application SITANS T00 transmitters can be used in all industrial sectors. Their compact design enables simple mounting on standard DIN rails on-site in protective

More information

SEM210 SERIES. Programmable In-head Universal Temperature Transmitter INDEX SECTION CONTENTS PAGE NO.

SEM210 SERIES. Programmable In-head Universal Temperature Transmitter INDEX SECTION CONTENTS PAGE NO. INDEX SECTION CONTENTS PAGE NO. SEM210 SERIES 1.0 DESCRIPTION 1 2.0 SPECIFICATION 15 3.0 INSTALLATION 67 Programmable Inhead Universal Temperature Transmitter Status Instruments Ltd, Green Lane Business

More information

600T Series Transmitters Model 653L Electronic temperature transmitter (PC programmable for RTD and resistance) Specification Sheet

600T Series Transmitters Model 653L Electronic temperature transmitter (PC programmable for RTD and resistance) Specification Sheet Specification Sheet 600T Series Transmitters Model 65L Electronic temperature transmitter (PC programmable for RTD and resistance) High flexibility and wide rangeability Primary element and calibration

More information

FIELD DEVICES TEMPERATURE

FIELD DEVICES TEMPERATURE FIELD DEVICES TEMPERATURE Product Specifications Model RTT80 I/A Series Temperature Transmitter with HART 7 Communication Protocol and Optional SIL Certification PSS 2A-1F8 A The Foxboro brand Model RTT80

More information

Digital temperature transmitter Model T15.H, head mounting version Model T15.R, rail mounting version

Digital temperature transmitter Model T15.H, head mounting version Model T15.R, rail mounting version Electrical temperature measurement Digital temperature transmitter Model T15.H, head mounting version Model T15.R, rail mounting version WIKA data sheet TE 15.01 Applications Process industry Machine building

More information

High-precision process calibrator Model CED7000

High-precision process calibrator Model CED7000 Calibration technology High-precision process calibrator Model CED7000 WIKA data sheet CT 85.51 Applications Research and development laboratories Calibration service companies and service industry Industry

More information

FieldIT Temperature Transmitter, rail mounted TH102/TH102-Ex

FieldIT Temperature Transmitter, rail mounted TH102/TH102-Ex Data Sheet 10/-8.54 EN Level 0: Information FieldIT Temperature Transmitter, rail mounted TH102/TH102-Ex HART programmable, Pt 100 (RTD), thermocouples, electrical isolation Resistance thermometer (2,

More information

Rosemount 148 Temperature Transmitter

Rosemount 148 Temperature Transmitter Product Data Sheet Rosemount 148 Rosemount 148 Temperature Transmitter Basic temperature transmitter offers a cost-effective solution for temperature monitoring points transmitter design provides flexible

More information

Analogue Temperature Transmitter Model T24.10, PC configurable, Head Mounting

Analogue Temperature Transmitter Model T24.10, PC configurable, Head Mounting Electrical Temperature Measurement Analogue Temperature Transmitter Model T24.10, PC configurable, Head Mounting WIKA Data Sheet TE 24.01 Applications T Machinery, plant construction T Process industry

More information

JUMO dtrans T01 HART / T01T HART / T01 Junior / T01 Ex / T01 HART Ex Programmable 2-wire transmitter

JUMO dtrans T01 HART / T01T HART / T01 Junior / T01 Ex / T01 HART Ex Programmable 2-wire transmitter JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: 49 661 60030 Fax: 49 661 6003607 Email: mail@jumo.net Internet: www.jumo.net JUMO

More information

Technical Information itemp TMT84

Technical Information itemp TMT84 TI00138R/09/EN/05.17 71356457 Products Solutions Services Technical Information itemp TMT84 Dual Input Temperature Transmitter PROFIBUS PA communication Application Temperature transmitter with 2 universal

More information

PRODUCT SPECIFICATION AND MODEL SELECTION GUIDE

PRODUCT SPECIFICATION AND MODEL SELECTION GUIDE XYR 5000 Wireless Temperature Transmitters WT530 34-XY-03-02 09/2006 PRODUCT SPECIFICATION AND MODEL SELECTION GUIDE Function The WT530 Temperature Transmitter is part of the XYR 5000 family of wireless

More information

FieldIT Temperature Transmitter, head mounted TH02/TH02-Ex

FieldIT Temperature Transmitter, head mounted TH02/TH02-Ex Data Sheet 0/-8.9 EN Level 0: Information FieldIT Temperature Transmitter, head mounted TH0/TH0-Ex HART programmable, Pt 00 (RTD), thermocouples, electrical isolation Input Resistance thermometer (,, wire

More information

Rosemount 148 Temperature Transmitter

Rosemount 148 Temperature Transmitter Product Data Sheet Rosemount 148 Rosemount 148 Temperature Transmitter Ready-to-install solution for temperature monitoring applications Increased measurement accuracy and reliability Accepts 2-, 3-, and

More information

JUMO dtrans T01 HART / T01T HART / T01 Junior / T01 Ex / T01 HART Ex Programmable 2-wire transmitter

JUMO dtrans T01 HART / T01T HART / T01 Junior / T01 Ex / T01 HART Ex Programmable 2-wire transmitter JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: 49 661 60030 Fax: 49 661 6003607 Email: mail@jumo.net Internet: www.jumo.net JUMO

More information

3 Ex i Isolators. Temperature Transmitter with Output 0/ ma, without Limit Value Contact (Field Circuit Ex i) Type 9182/.0-5.

3 Ex i Isolators. Temperature Transmitter with Output 0/ ma, without Limit Value Contact (Field Circuit Ex i) Type 9182/.0-5. Ex i Isolators Temperature Transmitter with Output 0/4... 20 ma, without Limit Value Contact Field Circuit Ex i) One unit for nearly all temperature sensors indivdually configurable Intrinsically safe

More information

Digital temperature transmitter for resistance sensors Model T15.H, head mounting version Model T15.R, rail mounting version

Digital temperature transmitter for resistance sensors Model T15.H, head mounting version Model T15.R, rail mounting version Temperature Digital temperature transmitter for resistance sensors Model T15.H, head mounting version Model T15.R, rail mounting version WIKA data sheet TE 15.01 for further approvals see page 10 Applications

More information

3 Ex i Isolators. Temperature Transmitter without Output 0/ ma, with Limit Value Contact (Field Circuit Ex i) Type 9182/.

3 Ex i Isolators. Temperature Transmitter without Output 0/ ma, with Limit Value Contact (Field Circuit Ex i) Type 9182/. Ex i Isolators Temperature Transmitter without Output 0/4... 20 ma, with Limit Value Contact Field Circuit Ex i) One unit for nearly all temperature sensors indivdually configurable Intrinsically safe

More information

Rail mounted Temperature Transmitter TH102/TH102-Ex

Rail mounted Temperature Transmitter TH102/TH102-Ex Data Sheet 10/-8.54 EN Rail mounted Temperature Transmitter TH102/TH102-Ex HART programmable, Pt 100 (RTD), thermocouples, electrical isolation Input Resistance thermometer (2, 3, 4 wire circuit) Thermocouples

More information

Miniature resistance thermometer Explosion-protected version Model TR34, thread-mounted

Miniature resistance thermometer Explosion-protected version Model TR34, thread-mounted Electrical temperature measurement Miniature resistance thermometer Explosion-protected version Model TR34, thread-mounted WIKA data sheet TE 60.34 Applications Machine building, plant and vessel construction

More information

SMART TEMPERATURE TRANSMITTERS. smar

SMART TEMPERATURE TRANSMITTERS. smar SMART TEMPERATURE TRANSMITTERS FEATURES Single unit accepts signal from: - Standart RTDs and Thermocouples - Single ended or differential sensing - mv signals from radiation pyrometers, load cells, etc.

More information

Assembly. Front view. Parametrization interface. Power Bus

Assembly. Front view. Parametrization interface. Power Bus Temperature Converter Features Assembly 1-channel signal conditioner 24 V DC supply Thermocouple, RTD, potentiometer or mv input Input for PTC thermistor Current and voltage output Line fault (LFD) and

More information

P5201 Universal Programmable Transmitters with Galvanic Isolation

P5201 Universal Programmable Transmitters with Galvanic Isolation Transmitters - KB0288-2012/09 P5201 Universal Programmable Transmitters with Galvanic Isolation One type of transmitter for all regular resistance and thermocouple sensors. Linearized output signal 4 to

More information

FIELD DEVICES TEMPERATURE

FIELD DEVICES TEMPERATURE FIELD DEVICES TEMPERATURE Product Specifications Model RT I/A Series Temperature Transmitter with HART 7 Communication Protocol and Optional SIL Certification The Model RTT80 is a microprocessor-based

More information

Digital temperature transmitter with HART protocol Model T32.1S, head mounting version Model T32.3S, rail mounting version

Digital temperature transmitter with HART protocol Model T32.1S, head mounting version Model T32.3S, rail mounting version Electrical temperature measurement Digital temperature transmitter with HART protocol Model T32.1S, head mounting version Model T32.3S, rail mounting version WIKA data sheet TE 32.04 Applications Process

More information

DSCL, DSCP, SCTP. Industrial Loop Isolators and Transmitters DSCL, DSCP, SCTP. Industrial Loop Isolators and Transmitters

DSCL, DSCP, SCTP. Industrial Loop Isolators and Transmitters DSCL, DSCP, SCTP. Industrial Loop Isolators and Transmitters Industrial Loop Isolators and Transmitters DSCL,, SCTP DSCL,, SCTP Industrial Loop Isolators and Transmitters Description Dataforth s DSCL,, and SCTP series of products is a complete family of loop and

More information