D E N S I T Y T R A N S M I T T E R S

Size: px

Start display at page:

Download "D E N S I T Y T R A N S M I T T E R S"

Arleen Wheeler
5 years ago
Views:

1 Accuracy ± g/cm 3 (± 0. Brix) D E N S I T Y T R A N S M I T T E R S F O R D E N S I T Y A N D C O N C E N T R A T I O N A P P L I C A T I O N S Range 0.5 g/cm 3 5 g/cm 3 Direct density or concentration readout in engineering units such as g/cm 3, Kg/m 3, Specific Gravity, Brix, Baume, Plato, INPM, GL, API, % Solids, % Concentration, etc. Integral Temperature Sensor Suitable for Tank and Pipe Applications Factory Calibration and Self Calibration Advanced Diagnostics Largest Library of Function Block Execution Capacity Industrial and Sanitary Models Instantiable Function Blocks Supported by DD, EDDL and FDT/DTM Density, Concentration and Temperature in three Analog Input Blocks

Features Accuracy ±0.0004 g/cm³ (±0. Brix); Temperature compensation; Range 0.

Brix, Baume, Plato, INPM, GL, API, % Solids, % Concentration, etc; Suitable for dynamic and static liquids; Two wire loop powered; Several different wetted materials; Single integrated unit without

Continuous/Self diagnostics; Weather proof, explosion proof and intrinsically safe; The control strategy is built from direct instantiation and deletion of function blocks; Configuration and

2 Features Accuracy ± g/cm³ (±0. Brix); Temperature compensation; Range 0.5 g/cm³ - 5 g/cm³; Standard industrial and sanitary process connection; Digital LCD indicator; Direct density or concentration readout in engineering units such as g/cm³, kg/m 3, Specific Gravity, Brix, Baume, Plato, INPM, GL, API, % Solids, % Concentration, etc; Suitable for dynamic and static liquids; Two wire loop powered; Several different wetted materials; Single integrated unit without moving parts; Factory calibration and Self calibration; In field re-calibration: No standard reference required; No lab calibration required; No process shutdown. Continuous/Self diagnostics; Weather proof, explosion proof and intrinsically safe; The control strategy is built from direct instantiation and deletion of function blocks; Configuration and Parameterization all through open and interoperable configuration tools available in the market, e.g., based on PC or PCMCIA Cards or operations by the local adjustment switches (should be used with a LCD display); Use of the Analog Input function; Totally digital; including sensor, electronics and communication; Configurable Local Adjustment (Foundation fieldbus TM and PROFIBUS PA); Easy firmware upgrade (via Flash Memory Interface) for Foundation fieldbus TM and PROFIBUS PA; Easy maintenance; Three technology options: HART, Foundation fieldbus TM, PROFIBUS PA. HART - 4 to 20 ma Multi-drop operation mode; Supports DTM and EDDL. Foundation fieldbus TM 7 different types of function blocks for control strategies and advanced diagnostics; Up to 20 function blocks; Two analog inputs: density and concentration or temperature; Execution of up to 3 external links (9 Publisher and 2 Subscriber); 2 ma consumption; Dynamic block instantiation improves interchangeability; Foundation fieldbus TM registered and ITK approved; MVC (Multivariable Container) enabled. PROFIBUS PA 2mA consumption; Three Function blocks for analog inputs: density, concentration and temperature; Integrated to Simatic PDM; Supports DTM and EDDL; Profile 3.0 improves interchangeability.

Functional Description The DT300 Touché Intelligent Density Transmitter is an instrument developed for the continuous, online measurement of liquid density and concentration, directly in the

3 Functional Description The DT300 Touché Intelligent Density Transmitter is an instrument developed for the continuous, online measurement of liquid density and concentration, directly in the industrial process. Its pioneer technology consists of a capacitive type differential pressure sensor coupled to a pair of pressure repeaters immersed in the process. A temperature sensor located between the two pressure repeaters is used to compensate the temperature variations in the process fluid. A dedicated software, by means of an algorithm, calculates the fluid density. Depending on the industrial process, density may be expressed in g/cm 3, Kg/m 3, lb/ft 3, Specific Gravity, Brix degree, Gay-Lussac degree, Baumé degree, Plato degree, INPM degree, API degree, Solids %, Concentration %, etc. Designed for process control applications, these 2- wire transmitters generate a signal proportional to the concentration/density. Digital communication for remote calibration and monitoring is also provided. Block Diagram Sensor Assembly PROCESS ELECTRONIC PCB Main Processor Assembly PROBE TEMPERATURE COMPENSATION ALGORITHM P ELECTRONIC CONVERTER PROCESSING UNIT RANGES SPECIAL FUNCTIONS OUTPUT CONTROL SERIAL COMMUNICATION HART PROTOCOL CONVERTER D/A MODEM BELL 202 INPUT/OUTPUT STAGE SIGNAL CONDITIONER 4-20mA / HART / Foundation fieldbus / PROFIBUS PA TEMPERATURE CONVERTER LCD Indicator Assembly P 2 E2 PROM * SENSOR DATA DISPLAY CONTROLLER DISPLAY DIGITAL

Density Transmitters Types The DT300 Touché is available in two models: DT300I (Industrial Model) for general purpose; DT300S (Sanitary Model) for food and other applications where sanitary

4 Density Transmitters Types The DT300 Touché is available in two models: DT300I (Industrial Model) for general purpose; DT300S (Sanitary Model) for food and other applications where sanitary connections are required. Both models have two mounting types: top mounting (straight type) and side mounting (curved type). Installation may be done either in open or pressurized tanks, or directly in pipes since the DT300 is suitable for dynamic and static fluids. The Sanitary model that meet 3-A Certification (Authorization N 399) uses a Tri-Clamp connection to allow a quick and easy connection and disconnection from the process. The wetted surface finish is polished and then is free of crevices where food or bacteria can be collected. 3A is the most widely accepted sanitary standard in the food, drug and beverage industry. Applications Sugar and Alcohol Processing Plants: Brix of the sugarcane juice, brix of the must, brix of the syrup, brix of the molasses, brix of the solved juice, calcium solution of the Baumé, interface level of the hexane cycle, lime density, INPM degree of the hydrated alcohol, INPM degree of the anhydrid alcohol, etc. Dairy Product Industries: Condensed milk, Lactose, Yogurt, Cream cheeses, Lactic Acids, etc. Food Industry: Vegetable oils, miscellaneous extractions, fruit syrup, starch dilution, glucose, jams, jellies, sweets, honey, tomato pulp, citrus juices, etc. Pulp and Paper Industries: Black liquor, green liquor, white liquor, red liquor, caustic soda concentration, ash dilution, talc dilution, pulp dilution, ink concentration, potassium hydroxide, etc. Beverage Industry: Beer (Plato degree in the fermentation process) Soft Drinks (brix of the liquid sugar, etc.), liquors, wines, soluble coffee, malt, tequila, etc. Chemical Industry: Acids, concentration/mixture, caustic soda, glycol, salt solution, detergent, toluene, urea, potassium, etc. Mining Slurries: Mineral pulp, extraction of thins, flotation, thickening, acid concentration, starch dilution, scrapers, lime mud. Petrochemical Industry: Gas washing water, lubricant oils, aromatic extraction, fuel oils, gasoline, kerosene, water/oil interface level.

Parameterization and Diagnostics DT300 Series are available in three different technologies: HART (DT30), Foundation fieldbus TM (DT302) and PROFIBUS PA (DT303).

For these models is possible to configure concentration adjust, self-calibration, direct density or concentration readout in engineering units and other control functions using the magnetic

It is designed for management and diagnostics of field devices to ensure reactive, preventive, predictive and proactive maintenance.

tools based on DD (Device Description) or DTM (Device Type Manager), such as AMS TM, FieldCare TM, PACTware TM, HHT275 and HHT375, PRM Device Viewer.

5 Parameterization and Diagnostics DT300 Series are available in three different technologies: HART (DT30), Foundation fieldbus TM (DT302) and PROFIBUS PA (DT303). These instruments can be configured with Smar software and other manufacturers configuration tools. Local adjustment is available in DT302 and DT303. For these models is possible to configure concentration adjust, self-calibration, direct density or concentration readout in engineering units and other control functions using the magnetic screwdriver. Smar has developed Asset View, which is a user-friendly Web Tool that can be accessed anywhere and anytime using an Internet browser. It is designed for management and diagnostics of field devices to ensure reactive, preventive, predictive and proactive maintenance. HART - DT30 DT30 (HART protocol) can be configured by: Smar CONF40 for Windows and UNIX; Smar DDCON00 for Windows and UNIX; Smar HPC30 for several models of Palms*; Other manufacturers configuration tools based on DD (Device Description) or DTM (Device Type Manager), such as AMS TM, FieldCare TM, PACTware TM, HHT275 and HHT375, PRM Device Viewer. For DT30 management and diagnostics, Asset View ensures continuous information monitoring. *Requires the HPI3 or HPI32 interface. Foundation fieldbus TM - DT302 DT302 utilizes the Foundation fieldbus TM H protocol, an open technology that allows any H enabled configuration tool to configure this device. Syscon302 (System Configuration Tool) is a software tool used to configure, maintain and operate the field devices. Syscon offers efficient and friendly interaction with the user, using Windows NT version 4.0 or later, Windows 2000 and Windows XP. Seventeen different types of function blocks are supported, and up to 20 function blocks can be running simultaneously. Maintenance procedures with Asset View diagnostics and status information from Foundation fieldbus TM result in a safer plant with longer availability. Configuration tools such as AMS TM and HHT375 can configure DT302 devices. DD (Device Description) and CF (Capability File) files can be downloaded at either the Smar or Fieldbus Foundation website. DT302 supports complex strategies configurations due to the high capacity and variety of dynamic instantiable function blocks. DT303 (PROFIBUS PA protocol) can be configured using Simatic PDM and by the FDT (Field Device Tool) and DTM (Device Type Manager) concept tools, such as FieldCare TM and PACTware TM. It can also be integrated by any PROFIBUS System using the GSD file. PROFIBUS PA also has quality and diagnostic information, improving plant management and maintenance. PROFIBUS PA - DT303

6 Applications HART - DT30 Power Supply Interface HI Control Painel Field Foundation fieldbus TM - DT302 BT302 Bus Terminator Solution Density Power Supply + Bus Impedance BT302 Bus Terminator PROFIBUS - DT303 BT302 Bus Terminator Power Supply Solution Density BT302 Bus Terminator Profibus DP Master

7 Technical Characteristics Functional Specifications Output and Communication Protocol Power Supply/ Current Consumption Indicator Hazardous Area Certifications Other Certification ero and Span Adjustments Failure Alarm (Diagnostics) Temperature Limits Turn-on Time Configuration Static Pressure Limit Humidity Limits Damping Adjustment HART : Two-wire, 4-20 ma with super-imposed digital communication (HART Protocol). Foundation fieldbus TM and PROFIBUS PA: Digital only. Complies with IEC 658-2:2000 (H): 3.25 kbit/s voltage mode, bus powered. HART : 2 to 45 Vdc. Foundation fieldbus TM and PROFIBUS PA: Bus powered: 9 to 32 Vdc. Quiescent current consumption: 2 ma. 4½-digit numerical and 5-character alphanumerical LCD indicator (optional). HART, Foundation fieldbus TM and PROFIBUS PA: Explosion proof, weather proof, intrinsically safe, CEPEL, Dekra/EXAM, FM, NEMKO and NEPSI. Foundation fieldbus TM and PROFIBUS PA: FISCO Ex ia IIC T4 (CEPEL, Dekra/EXAM, NEPSI) and FNICO Ex nl IIC T4 (CEPEL, Dekra/EXAM) HART, Foundation fieldbus TM and PROFIBUS PA: 3A Sanitary Standard. Noninteractive, via digital communication or local adjustment. Detailed diagnostics through communication for all protocols. HART : In case of sensor or circuit failure, the self diagnostics drives the output to 3.6 or 2.0 ma, according to the user s choice. Foundation fieldbus TM : For sensor circuit failures, events are generated and status is sent to link outputs. Detailed diagnostics are available in the contained parameters. PROFIBUS PA: For sensor or circuit failures, status is sent to output parameters. Detailed diagnostics are available in the contained parameters. Ambient: -40 to 85 C (-40 to 85 F) Process: -20 to 50 C (-04 to 302 F) Storage: -40 to 00 C (-40 to 22 F) Digital Display: -0 to 60 C (4 to 40 F) HART : Performs within specifications in less than 5 seconds after power is applied to the transmitter. Foundation fieldbus TM and PROFIBUS PA: Performs within specifications in less than 0 seconds after power is applied to the transmitter. HART : By digital communication (HART protocol) using the configuration software CONF40, DDCON (for windows), HPC30 or HPC40 (for Palms). It can also be configured using DD and FDT/DTM tools. Foundation fieldbus TM and PROFIBUS PA: Basic configuration may be done using the local adjustment magnetic tool if device is fitted with display. Complete configuration is possible using configuration tools. 7 MPa (70 kgf/cm²) (05 psi). 0 to 00% RH. 0 to 32 seconds in addition to intrinsic sensor response time (0.2 s) via digital communication.

8 Technical Characteristics Performance Specifications Reference Conditions Accuracy Stability (for 2 months) Ambient Temperature Effect (per 0 C) Static Pressure Effect Power Supply Effect Mounting Position Effect Electro-Magnetic Interference Effect Temperature of 25 C (77 F), atmospheric pressure, power supply of 24 Vdc, silicone oil fill fluid, isolating diaphragms in 36L SST and digital trim equal to lower and upper range values. For range : ± g/cm³ (±0. Bx) For range 2: ± g/cm³ For range 3: ±0.006 g/cm³ Linearity, hysteresis and repeatability effects are included. For range : 0.02 x 0-3 g/cm³ For range 2: x 0-3 g/cm³ For range 3: 0.52 x 0-3 g/cm³ For range : x 0-3 g/cm³ For range 2: 0.03 x 0-3 g/cm³ For range 3: 0.04 x 0-3 g/cm³ ero Static Pressure For range : 0.00 x 0-3 g/cm³ For range 2: x 0-3 g/cm³ For range 3: x 0-3 g/cm³ ± 0.005% of calibrated span per volt. It can be eliminated after installation. No span effect. Designed to comply with IEC 6326.

9 Technical Characteristics Physical Specifications Electrical Connection Process Connection Wetted Parts Nonwetted Parts Mounting Approximate Weights /2-4 NPT M20 X.5 PG 3.5 DIN Industrial Model: 36 SST Flange ANSI B Sanitary Model: 304 SST Tri-clamp 4. Isolating Diaphragms: 36L SST or Hastelloy C276. Wetted O-Rings (For Sanitary Model): Buna N, Viton or Teflon. Electronic Housing: Injected aluminum with polyester painting or 36 SST. Complies with NEMA 4X, IP66/68 W. Fill Fluid: Silicone (DC200/20, DC704), Glycerin and Water, Neobee M20 Propylene Glycol. Cover O-Rings: Buna N. Identification Plate: 36 SST. Side or top mounted. 8 kg (8 lb) Sanitary Model. 2 kg (26 lb) Industrial Model. Viton and Teflon are trademarks of E. I. DuPont de Nemours & Co. HART is a trademark of HART Communication Foundation. Foundation is a trademark of Fieldbus Foundation. Profibus is a trademark of Profibus International. This product is protected by US patent numbers 6,234,09 and D439,855.

10 Ordering Code - Industrial Model MODEL DT30 I DT302 I DT303 I INDUSTRIAL CONCENTRATION/DENSITY TRANSMITTER HART & 4-20 ma Foundation fieldbus TM PROFIBUS PA Range Minimum Span H I U to to to.8 g/cm³ 2.5 g/cm³ 5.0 g/cm³ Wetted Parts Material g/cm³ g/cm³ g/cm³ Hastelloy C276 36L SST Probe in 36L SST and Diaphragms in Hastelloy C276 Others Specify Fill Fluid N D S G Neobee- M20 Propylene Glycol - Food Grade DC-704 Silicone Oil DC 200/20 Silicone Oil Glycerin and Water - Food Grade Others Specify Local Indicator 0 Without Indicator With Digital Indicator 0 A B Electrical Connection ½ - 4 NPT M20 X.5 Pg 3.5 DIN Others Specify Mounting 2 Top Side A 2 3 C Note: For the concentration units: o Brix, o Plato, o INPM, o GL and o Baumé, specify code. Process Connection Size, Rating and Standard 4" 50# ANSI B-6.5 4" 300# ANSI B-6.5 4" 600# ANSI B-6.5 DN 00 PN25/40 DIN FORM D Others - Specify Optional Item (*) H0 H H2 H3 Aluminum Housing 36 SST Housing Aluminum Housing for Saline Atmosphere 36 SST Housing for Saline Atmosphere Special Options Specify DT30I I S 0 5 DT302I I S 0 5 DT303I I S 0 5 * Leave it blank for no optional items. * * * TYPICAL MODEL NUMBER 0

11 Ordering Code - Sanitary Model MODEL DT30 S DT302 S DT303 S SANITARY CONCENTRATION/DENSITY TRANSMITTER HART & 4-20 ma Foundation fieldbus TM PROFIBUS PA Range Minimum Span to to to.8 g/cm³ 2.5 g/cm³ 5.0 g/cm³ g/cm³ g/cm³ g/cm³ Wetted Parts Material H Hastelloy C276 I 36L SST U Probe in 36L SST and Diaphragms in Hastelloy C276 Others Specify N D S G Fill Fluid Neobee- M20 Propylene Glycol - Food Grade** DC-704 Silicone Oil DC 200/20 Silicone Oil Glycerin and Water - Food Grade Others Specify 0 Local Indicator Without Indicator With Digital Indicator 0 A B Electrical Connection ½ - 4 NPT M20 X.5 Pg 3.5 DIN Others Specify 2 Mounting Top Side J Process Connection Tri-clamp - 4" 300# Others Specify B V T Note: For the concentration units: o Brix, o Plato, o INPM, o GL and o Baumé, specify code. Wetted O-Rings Material Buna-N Viton Teflon Others Specify 0 Tank Adapter Without Tank Adapter (Supplied by Customer) With Tank Adapter 36 SST Tri-Clamp 0 Without Tri-clamp With Tri-clamp in 304 SST Optional Item (*) H0 H H2 H3 Aluminum Housing 36 SST Housing Aluminum Housing for Saline Atmosphere 36 SST Housing for Saline Atmosphere Special Options Specify DT30S I N 0 2 J B DT302S I N 0 2 J B DT303S I N 0 2 J B * Leave it blank for no optional items. ** Compliant with 3A Standard * * * TYPICAL MODEL NUMBER

12 Dimensional Drawings Industrial Model Dimensions are millimeters (inches) Side Mounting Type Top Mounting Type Sanitary Model Side Mounting Type Top Mounting Type 2

13 System302 Architecture 3

14 Main Smar Products Pressure Level Density/Concentration 4 to 20 ma LD290 LD30 LD29 LD400 RD400 DT30 LD302 LD292 DT302 LD303 LD293 DT303 Pressure Transmitter Pressure Transmitter Pressure Transmitter Level Transmitter Intelligent Density / Concentration Transmitter Position FY30 FY30 TP30 FY302 FY400 FY302 TP302 FY303 FY303 TP303 Valve Positioner Valve Positioner Valve Positioner Position Transmitter Temperature Junction Box TT30 TT ma 4-20 ma TT302 TT303 TT42 Temperature Transmitter Panel Mounting Temperature Transmitter Head Mouting Temperature Transmitter 3 Ways Junction Box JM 4 Ways Junction Box JM400 Configurators Interfaces HART Configurator Interface CONF40 HART Configurator Interface DDCON 00 HART Configurator for Palm HPC30 HART-RS232 Interface HI3 HART-USB Interface HI32 4

15 Main Smar Products Converters FP302 IF302 FI302 FP303 IF303 FI303 Fieldbus to Pneumatic Signal Converter Current to Fieldbus Converter Fieldbus to Current Converter HART / Fieldbus Interface HI302 HART / Current Converter HCC30 Controllers TM DeviceNet TM DeviceNet Programmable Logical Controller LC700 Digital Controller CD600Plus Systems Interface Universal Fieldbus DFI302 TM DeviceNet TM DeviceNet Process Visualization Interface ProcessView Studio302 ASSETVIEW On Line Plant Asset Management Tool TM DeviceNet Foundation fieldbus TM System Configurator EQUIPMENT DATABASE LOGICVIEW FOR FBB 5

16 USA Smar International Corporation 600 Stonington Street, Suite 00 Houston, TX Phone: Fax: sales@smar.com Smar Research Corporation 20 5th Ave Ronkonkoma, New York 779 Phone: Fax: sales@smarresearch.com Smar Laboratories Corporation 600 Stonington Street, Suite 00 Houston, TX Phone: Fax: sales@smar.com SINGAPORE Smar Singapore Pte. Ltd. 35 Outram Road #06-07, Tan Boon Liat Building Singapore Phone: Fax: info@smar.com.sg BRAIL Smar Equipamentos Ind. Ltda. Rua Dr. Antonio Furlan Jr., 028 Sertãozinho SP Phone: Fax: insales@smar.com.br GERMANY Smar GmbH Rheingaustrasse Bad Kreuznach Phone: Fax: infoservice@smar.de MEXICO Smar Mexico Cerro del Cubilete #40 Fracc. Lomas de Mazatlán C.P. 820 Mazatlán, Sinaloa, Phone / Fax: 52 + (669) Phone / Fax: 52 + (669) ventas@smar.com NETHERLANDS Smar Netherlands A. van Leeuwenhoekweg 9b 2408 AL Alphen aan den Rijn Phone: Fax: pk@smar.nl FRANCE Smar France S. A. R. L. 42, rue du Pavé des Gardes F Chaville Phone: Fax: smar.adm@wanadoo.fr CHINA Smar China Corp. C-209, Ye Qing Plaza No. 9 Wangijing Beilu Chaoyang District Beijing 00 02, P.R China Phone: Fax: info@smar.com.cn UNITED KINGDOM Smar UK Ltd. Bluebell Farm, Sandy Lane Romsey, Hampshire SO5 0PD Phone: +44 (0) Fax: +44 (0) info@smaruk.co.uk Plus a network of representatives in 58 countries. For your nearest representative please contact: insales@smar.com.br smar Specifications and information are subject to change without notice. For the latest updates, please visit the Smar website above. Copyright Smar International - all rights reserved. - November/2008

DENSITY TRANSMITTERS FOR DENSITY AND CONCENTRATION APPLICATIONS. Accuracy ± g/cm 3 (± 0.1 Brix) Range 0.5 g/cm 3 5 g/cm 3

Accuracy ±.4 g/cm 3 (±. Brix) DENSITY TRANSMITTERS FOR DENSITY AND CONCENTRATION APPLICATIONS Range.5 g/cm 3 5 g/cm 3 Direct density or concentration readout in engineering units such as g/cm 3, Kg/m 3,