DENSITY TRANSMITTERS FOR DENSITY AND CONCENTRATION APPLICATIONS. Accuracy ± g/cm 3 (± 0.1 Brix) Range 0.5 g/cm 3 5 g/cm 3

Transcription

1 Accuracy ±.4 g/cm 3 (±. Brix) DENSITY TRANSMITTERS FOR DENSITY AND CONCENTRATION APPLICATIONS Range.5 g/cm 3 5 g/cm 3 Direct density or concentration readout in engineering units such as g/cm 3, Kg/m 3, Specific Gravity, Brix, Baume, Plato, INPM, GL, API, % Solids, % Concentration, etc. Integral Temperature Sensor Suitable for Tank and Pipe Applications Factory Calibration and Self Calibration Advanced Diagnostics Largest Library of Function Block Execution Capacity Industrial and Sanitary Models Instantiable Function Blocks Supported by DD, EDDL and FDT/DTM Density, Concentration and Temperature in three Analog Input Blocks

2 Features Accuracy ±.4 g/cm³ (±. Brix); Temperature compensation; Range.5 g/cm³ - 5 g/cm³; Standard industrial and sanitary process connection; Digital LCD indicator; Direct density or concentration readout in engineering units; Suitable for dynamic and static liquids; Two wire loop powered; Several different wetted materials; Single integrated unit without moving parts; Factory calibration and Self calibration; In field re-calibration: No standard reference required; No lab calibration required; No process shutdown. Continuous/Self diagnostics; Weather proof, explosion proof and intrinsically safe; The control strategy is built from direct instantiation and deletion of function blocks; Configuration and Parameterization all through open and interoperable configuration tools available in the market, e.g., based on PC or PCMCIA Cards or operations by the local adjustment switches (should be used with a LCD display); Use of the Analog Input function; Totally digital; including sensor, electronics and communication; Configurable Local Adjustment (Foundation fieldbus TM and PROFIBUS PA); Easy firmware upgrade (via Flash Memory Interface) for Foundation fieldbus TM and PROFIBUS PA; Easy maintenance; Three technology options: HART, Foundation fieldbus TM, PROFIBUS PA. HART - 4 to ma Multi-drop operation mode; Supports DTM and EDDL. Foundation fieldbus TM 7 different types of function blocks for control strategies and advanced diagnostics; Up to function blocks; Two analog inputs: density and concentration or temperature; Execution of up to 3 external links (9 Publisher and Subscriber); ma consumption; Dynamic block instantiation improves interchangeability; Foundation fieldbus TM registered and ITK approved; MVC (Multivariable Container) enabled. PROFIBUS PA ma consumption; Three Function blocks for analog inputs: density, concentration and temperature; Integrated to Simatic PDM; Supports DTM and EDDL; Profile 3. improves interchangeability.

3 Functional Description The DT3 Touché Intelligent Density Transmitter is an instrument developed for the continuous, online measurement of liquid density and concentration, directly in the industrial process. Its pioneer technology consists of a capacitive type differential pressure sensor coupled to a pair of pressure repeaters immersed in the process. A temperature sensor located between the two pressure repeaters is used to compensate the temperature variations in the process fluid. A dedicated software, by means of an algorithm, calculates the fluid density. Depending on the industrial process, density may be expressed in g/cm 3, Kg/m 3, lb/ft 3, Specific Gravity, Brix degree, Gay-Lussac degree, Baumé degree, Plato degree, INPM degree, API degree, Solids %, Concentration %, etc. Designed for process control applications, these -wire transmitters generate a signal proportional to the concentration/density. Digital communication for remote calibration and monitoring is also provided. Block Diagram Sensor Assembly Main Processor Assembly PROCESS ELECTRONIC PCB PROBE TEMPERATURE COMPENSATION ALGORITHM P ELECTRONIC CONVERTER TEMPERATURE CONVERTER PROCESSING UNIT RANGES SPECIAL FUNCTIONS OUTPUT CONTROL SERIAL COMMUNICATION HART PROTOCOL CONVERTER D/A MODEM BELL INPUT/OUTPUT STAGE SIGNAL CONDITIONER 4-mA / HART / Foundation fieldbus / PROFIBUS PA LCD Indicator Assembly P E PROM * SENSOR DATA DISPLAY CONTROLLER DISPLAY DIGITAL 3

4 Density Transmitters Types The DT3 Touché is available in two models: DT3I (Industrial Model) for general purpose; DT3S (Sanitary Model) for food and other applications where sanitary connections are required. Both models have two mounting types: top mounting (straight type) and side mounting (curved type). Installation may be done either in open or pressurized tanks, or directly in pipes since the DT3 is suitable for dynamic and static fluids. The Sanitary model that meet 3-A Certification (Authorization N 399) uses a Tri-Clamp connection to allow a quick and easy connection and disconnection from the process. The wetted surface finish is polished and then is free of crevices where food or bacteria can be collected. 3A is the most widely accepted sanitary standard in the food, drug and beverage industry. Applications Sugar and Alcohol Processing Plants: Brix of the sugarcane juice, brix of the must, brix of the syrup, brix of the molasses, brix of the solved juice, calcium solution of the Baumé, interface level of the hexane cycle, lime density, INPM degree of the hydrated alcohol, INPM degree of the anhydrid alcohol, etc. Dairy Product Industries: Condensed milk, Lactose, Yogurt, Cream cheeses, Lactic Acids, etc. Food Industry: Vegetable oils, miscellaneous extractions, fruit syrup, starch dilution, glucose, jams, jellies, sweets, honey, tomato pulp, citrus juices, etc. Pulp and Paper Industries: Black liquor, green liquor, white liquor, red liquor, caustic soda concentration, ash dilution, talc dilution, pulp dilution, ink concentration, potassium hydroxide, etc. Beverage Industry: Beer (Plato degree in the fermentation process) Soft Drinks (brix of the liquid sugar, etc.), liquors, wines, soluble coffee, malt, tequila, etc. Chemical Industry: Acids, concentration/mixture, caustic soda, glycol, salt solution, detergent, toluene, urea, potassium, etc. Mining Slurries: Mineral pulp, extraction of thins, flotation, thickening, acid concentration, starch dilution, scrapers, lime mud. Petrochemical Industry: Gas washing water, lubricant oils, aromatic extraction, fuel oils, gasoline, kerosene, water/oil interface level. 4

5 Parameterization and Diagnostics DT3 Series are available in three different technologies: HART (DT3), Foundation fieldbus TM (DT3) and PROFIBUS PA (DT33). These instruments can be configured with Smar software and other manufacturers configuration tools. Local adjustment is available in DT3 and DT33. For these models is possible to configure concentration adjust, self-calibration, direct density or concentration readout in engineering units and other control functions using the magnetic screwdriver. Smar has developed Asset View, which is a user-friendly Web Tool that can be accessed anywhere and anytime using an Internet browser. It is designed for management and diagnostics of field devices to ensure reactive, preventive, predictive and proactive maintenance. HART - DT3 DT3 (HART protocol) can be configured by: Smar CONF4 for Windows and UNIX; Smar DDCON for Windows and UNIX; Smar HPC3 for several models of Palms*; Other manufacturers configuration tools based on DD (Device Description) or DTM (Device Type Manager), such as AMS TM, FieldCare TM, PACTware TM, HHT75 and HHT375, PRM Device Viewer. For DT3 management and diagnostics, Asset View ensures continuous information monitoring. *Requires the HPI3 or HPI3 interface. Foundation fieldbus TM - DT3 DT3 utilizes the Foundation fieldbus TM H protocol, an open technology that allows any H enabled configuration tool to configure this device. Syscon3 (System Configuration Tool) is a software tool used to configure, maintain and operate the field devices. Syscon offers efficient and friendly interaction with the user, using Windows NT version 4. or later, Windows and Windows XP. Seventeen different types of function blocks are supported, and up to function blocks can be running simultaneously. Maintenance procedures with Asset View diagnostics and status information from Foundation fieldbus TM result in a safer plant with longer availability. Configuration tools such as AMS TM and HHT375 can configure DT3 devices. DD (Device Description) and CF (Capability File) files can be downloaded at either the Smar or Fieldbus Foundation website. DT3 supports complex strategies configurations due to the high capacity and variety of dynamic instantiable function blocks. DT33 (PROFIBUS PA protocol) can be configured using Simatic PDM and by the FDT (Field Device Tool) and DTM (Device Type Manager) concept tools, such as FieldCare TM and PACTware TM. It can also be integrated by any PROFIBUS System using the GSD file. PROFIBUS PA also has quality and diagnostic information, improving plant management and maintenance. PROFIBUS PA - DT33 5

6 Applications HART - DT3 Power Supply Interface HI 5 Control Painel Field FY3 FV DT3 DIT Foundation fieldbus TM - DT3 BT3 Bus Terminator Solution Density DT3 Power Supply + Bus Impedance FY3 FV DT3 DIT FY3 HSE Link Device BT3 Bus Terminator PROFIBUS - DT33 BT3 Bus Terminator BT3 Bus Terminator Power Supply FY33 FV Solution Density DT33 DF73 DT33 DIT FY33 Profibus DP Master 6

7 Technical Characteristics Functional Specifications Output and Communication Protocol Power Supply/ Current Consumption Indicator Hazardous Area Certifications Other Certification ero and Span Adjustments Failure Alarm (Diagnostics) Temperature Limits Turn-on Time Configuration Static Pressure Limit Humidity Limits Damping Adjustment HART : Two-wire, 4- ma with super-imposed digital communication (HART Protocol). Foundation fieldbus TM and PROFIBUS PA: Digital only. Complies with IEC 658-: (H): 3.5 kbit/s voltage mode, bus powered. HART : to 45 Vdc. Foundation fieldbus TM and PROFIBUS PA: Bus powered: 9 to 3 Vdc. Quiescent current consumption: ma. 4½-digit numerical and 5-character alphanumerical LCD indicator (optional). HART, Foundation fieldbus TM and PROFIBUS PA: Explosion proof, weather proof, intrinsically safe, CEPEL, Dekra/EXAM, FM, NEMKO and NEPSI. Foundation fieldbus TM and PROFIBUS PA: FISCO Field Device Ex ia IIC T4 (CEPEL, Dekra/EXAM, NEPSI) and FNICO Field Device Ex nl IIC T4 (CEPEL, Dekra/EXAM). HART, Foundation fieldbus TM and PROFIBUS PA: 3A Sanitary Standard. Noninteractive, via digital communication or local adjustment. Detailed diagnostics through communication for all protocols. HART : In case of sensor or circuit failure, the self diagnostics drives the output to 3.6 or. ma, according to the user s choice. Foundation fieldbus TM : For sensor circuit failures, events are generated and status is sent to link outputs. Detailed diagnostics are available in the contained parameters. PROFIBUS PA: For sensor or circuit failures, status is sent to output parameters. Detailed diagnostics are available in the contained parameters. Ambient: -4 to 85 C (-4 to 85 F) Process: - to 5 C (-4 to 3 F) Storage: -4 to C (-4 to F) Digital Display: - to 6 C (4 to 4 F) HART : Performs within specifications in less than 5 seconds after power is applied to the transmitter. Foundation fieldbus TM and PROFIBUS PA: Performs within specifications in less than seconds after power is applied to the transmitter. HART : By digital communication (HART protocol) using the configuration software CONF4, DDCON (for windows), HPC3 or HPC4 (for Palms). It can also be configured using DD and FDT/DTM tools. Foundation fieldbus TM and PROFIBUS PA: Basic configuration may be done using the local adjustment magnetic tool if device is fitted with display. Complete configuration is possible using configuration tools. 7 MPa (7 kgf/cm²) (5 psi). to % RH. to 3 seconds in addition to intrinsic sensor response time (. s) via digital communication. 7

8 Technical Characteristics Performance Specifications Reference Conditions Accuracy Stability (for months) Ambient Temperature Effect (per C) Static Pressure Effect Power Supply Effect Mounting Position Effect Electro-Magnetic Interference Effect Temperature of 5 C (77 F), atmospheric pressure, power supply of 4 Vdc, silicone oil fill fluid, isolating diaphragms in 36L SST and digital trim equal to lower and upper range values. For range : ±.4 g/cm³ (±. Bx) For range : ±.7 g/cm³ For range 3: ±.6 g/cm³ Linearity, hysteresis and repeatability effects are included. For range :. x -3 g/cm³ For range :.83 x -3 g/cm³ For range 3:.5 x -3 g/cm³ For range :.3 x -3 g/cm³ For range :.3 x -3 g/cm³ For range 3:.4 x -3 g/cm³ ero Static Pressure For range :. x -3 g/cm³ For range :.4 x -3 g/cm³ For range 3:.7 x -3 g/cm³ ±.5% of calibrated span per volt. It can be eliminated after installation. No span effect. Designed to comply with IEC 636-:6, IEC :6, IEC 6-6-4:6 and IEC 6-6-:5. Physical Specifications Electrical Connection Process Connection Wetted Parts Nonwetted Parts Mounting Approximate Weights / - 4 NPT M X.5 PG 3.5 DIN Industrial Model: 36 SST Flange ANSI B Sanitary Model: 34 SST Tri-clamp 4. Isolating Diaphragms: 36L SST or Hastelloy C76. Wetted O-Rings (For Sanitary Model): Buna N, Viton or Teflon. Electronic Housing: Injected aluminum with polyester painting or 36 SST. Complies with NEMA 4X, IP66/68 W. Fill Fluid: Silicone (DC/, DC74), Glycerin and Water, Neobee M Propylene Glycol. Cover O-Rings: Buna N. Identification Plate: 36 SST. Side or top mounted. 8 kg (8 lb) Sanitary Model. kg (6 lb) Industrial Model. Viton and Teflon are trademarks of E. I. DuPont de Nemours & Co. HART is a trademark of HART Communication Foundation. Foundation is a trademark of Fieldbus Foundation. Profibus is a trademark of Profibus International. This product is protected by US patent numbers 6,34,9 and D439,855. 8

9 Ordering Code - Industrial Model MODEL DT3 I DT3 I DT33 I INDUSTRIAL CONCENTRATION/DENSITY TRANSMITTER HART & 4- ma Foundation fieldbus TM PROFIBUS PA Range Minimum Span H I U X to to to.8 g/cm³.5 g/cm³ 5. g/cm³ Wetted Parts Material.5 g/cm³.5 g/cm³.5 g/cm³ Hastelloy C76 / Hastelloy C76 36L SST / 36L SST Hastelloy C76 / 36L SST 36L SST / 36L SST with plated TEFEL (ETFE) Others - Specify Fill Fluid N D S G T Neobee- M Propylene Glycol - Food Grade DC-74 Silicone Oil DC / Silicone Oil Glycerin and Water - Food Grade Syltherm 8 Others - Specify Local Indicator Without Indicator With Digital Indicator Electrical Connection 3 ½ - 4 NPT (4) / - 4 NPT X 3/4 NPT (AI 36) - With Adapter (5) / - 4 NPT X 3/4 BSP (AI36) - With Adapter (6) / - 4 NPT X / BSP (AI 36) - With Adapter (6) Mounting Top Side A 3 C Note: For the concentration units: o Brix, o Plato, o INPM, o GL and o Baumé, specify code. Process Connection Size, Rating and Standard 4" 5# ANSI B-6.5 4" 3# ANSI B-6.5 4" 6# ANSI B-6.5 DN PN5/4 DIN 56 - FORM D Others - Specify Continues Next Page A B M X.5 (7) PG 3.5 DIN (7) Others Specify DT3I I S 5 * TYPICAL MODEL NUMBER DT3I I S 5 * DT33I I S * Leave it blank for no optional items. 5 * 9

10 Ordering Code - Industrial Model MODEL INDUSTRIAL CONCENTRATION/DENSITY TRANSMITTER (CONTINUATION) I I4 I5 I6 I7 IE Identification Plate FM: XP, IS, NI, DI EXAM ( DMT): EX-IA; NEMKO: EX-D CEPEL: EX-D, EX-IA Without Certification EXAM (DMT) GRUPO I, M EX-IA NEPSI: EX-IA Housing Material () () H H H H3 H4 Aluminum (IP/Type) 36 SST (IP/Type) Aluminum for Saline Atmosphere (IPW/TypeX) (3) 36 SST for Saline Atmosphere (IPW/TypeX) (3) Copper Free Aluminum (IPW/TypeX) (3) Tag Plate J J J With Tag Blank User's Specification Display Unit Y Y Y Y3 Y4 Y5 Y6 YU Percentage : Current I (ma) : Density/Concentration (Eng. Unit) : Temperature (Temperature) : Current I (ma) : Density/Concentration (Eng. Unit) : Temperature (Temperature) : User's Specification Painting P P3 P4 P5 P8 P9 PC Gray Munsell N 6,5 Black Polyester White Epoxy Yellow Polyester Without Painting Blue Safety Epoxy Electrostatic Painting Blue Safety Polyester Electrostatic Painting Optional Item (*) Special Options DT3I-IS--5 DT3I-IS--5 DT33I-IS--5 I6 H J Y P * I6 H J P * I6 H J P * TYPICAL MODEL NUMBER * Leave it blank for no optional items. Optional Items Diaphragm Thickness Strengthening of the Probe Mounting Position N - Standard N -. mm R - with strengthening of the probe E - reverse position Notes () IPX8 tested in meters of water column for 4 hours. (4) Certified for use in Explosive Atmosphere (CEPEL, FM, CSA, NEPSI, NEMKO and EXAM). () Ingress Protection: (5) Certified for use in Explosive Atmosphere (CEPEL and CSA). Product CEPEL NEMKO / EXAM FM CSA NEPSI (6) Options not certified for Explosive Atmosphere. (7) Certified for use in Explosive Atmosphere (CEPEL, NEPSI, NEMKO and EXAM). DT3X IP66/68/W IP66/68/W Type 4X/6 Type 4X IP67 (3) IPW / TypeX tested for hours according to NBR 894 / ASTM B 7 standard.

11 Ordering Code - Sanitary Model MODEL DT3 S DT3 S DT33 S SANITARY CONCENTRATION/DENSITY TRANSMITTER HART & 4- ma Foundation fieldbus TM PROFIBUS PA Range Minimum Span H I U to to to.8 g/cm³.5 g/cm³ 5. g/cm³.5 g/cm³.5 g/cm³.5 g/cm³ Wetted Parts Material Hastelloy C76 36L SST Probe in 36L SST and Diaphragms in Hastelloy C76 Others Specify N D S G T Fill Fluid Neobee- M Propylene Glycol - Food Grade (8) DC-74 Silicone Oil DC / Silicone Oil Glycerin and Water - Food Grade Syltherm 8 Others Specify Local Indicator Without Indicator With Digital Indicator 3 Electrical Connection ½ - 4 NPT (4) / - 4 NPT X 3/4 NPT (AI 36) - With Adapter (5) / - 4 NPT X 3/4 BSP ( AI36) - With Adapter (6) / - 4 NPT X / BSP (AI 36) - With Adapter (6) Mounting Top Side J Process Connection Tri-clamp - 4" 3# (8) Others Specify B V T Wetted O-Rings Material Buna-N (8) Viton (8) Teflon (8) Others - Specify Tank Adapter Without Tank Adapter (Supplied by Customer) With Tank Adapter 36 SST Tri-Clamp Without Tri-clamp With Tri-clamp in 34 SST Continues Next Page Note: For the concentration units: o Brix, o Plato, o INPM, o GL and o Baumé, specify code. A B M X.5 (7) PG 3.5 DIN (7) Others - Specify DT3S I N J B * TYPICAL MODEL NUMBER DT3S I N J B * DT33S I N J B * Leave it blank for no optional items. *

12 Ordering Code - Sanitary Model MODEL SANITARY CONCENTRATION/DENSITY TRANSMITTER (CONTINUATION) Identification Plate I FM: XP, IS, NI, DI I4 EXAM ( DMT): EX-IA; NEMKO: EX-D I5 CEPEL: EX-D, EX-IA I6 Without Certification I7 EXAM (DMT) GRUPO I, M EX-IA IE NEPSI: EX-IA Housing Material () () H H H H3 H4 Aluminum (IP/Type) 36 SST (IP/Type) Aluminum for Saline Atmosphere (3) (IPW/TypeX) 36 SST for Saline Atmosphere (3) (IPW/TypeX) Copper Free Aluminum (3) (IPW/TypeX) Tag Plate J J J With Tag Blank User's Specification Display Unit Y Y Y Y3 Y4 Y5 Y6 YU Percentage : Current I (ma) : Density/Concentration (Eng. Unit) : Temperature (Temperature) : Current I (ma) : Density/Concentration (Eng. Unit) : Temperature (Temperature) : User's Specification Painting P P3 P4 P5 P8 P9 PC Gray Munsell N 6,5 Black Polyester White Epoxy Yellow Polyester Without Painting Blue Safety Epoxy Electrostatic Painting Blue Safety Polyester Electrostatic Painting Optional Item (*) Special Options DT3S-IN--JB DT3S-IN--JB DT33S-IN--JB I6 H J Y P * I6 H J P * I6 H J P * TYPICAL MODEL NUMBER * Leave it blank for no optional items. Notes () IPX8 tested in meters of water column for 4 hours. (5) Certified for use in Explosive Atmosphere (CEPEL and CSA). () Ingress Protection: (6) Options not certified for Explosive Atmosphere. (7) Certified for use in Explosive Atmosphere (CEPEL, NEPSI, NEMKO and EXAM). Product CEPEL NEMKO / EXAM FM CSA NEPSI (8) Compliant with 3A-743 standard for food and other applications where sanitary connections DT3X IP66/68/W IP66/68/W Type 4X/6 Type 4X IP67 are required. (3) IPW / TypeX tested for hours according to NBR 894 / ASTM B 7 standard. (4) Certified for use in Explosive Atmosphere (CEPEL, FM, CSA, NEPSI, NEMKO and EXAM). - Neobee MO Fill Fluid - Finishing wet Face:.8 µm Ra (3 µ" AA) - Wet O-Ring: Viton Teflon and Buna-N

13 Dimensional Drawings Industrial Model - 5 mm Dimensions are millimeters (inches) 365 (4.37) 45 (9.65) 46 (5.75) 83 (3.7) 89 (3.5) 6 (.4) Electrical Connection Flanged Connection Electrical Connection 4 Flaged Connection 5 (9.68) 73 (8.75) 65 (5.59) 8 (.) Side Mounting Type Top Mounting Type Sanitary Model - 5 mm 3 (9.5) 93 (.53) 63 (.48) 83 (3.7) Electrical Connection 89 (3.5) 45 (9.65) 89 (3.5) 3 (4.45) 46 (5.75) 4 Tri-Clamp Connection Electrical Connection 8 (.3) (4.7) 4 Tri-Clamp Connection 76 (3.) 76 (3.) 5 (9.68) 65 (5.59) 8 (3.9) 5 (9.68) 7 (4.6) Side Mounting Type Top Mounting Type 3

14 Dimensional Drawings Industrial Model - 8 mm 83 Electrical Connection Flange Connection 4" RF ANSI B6,5 5# 5, Side Mounting Type Top Mounting Type 4

15 4 - ma Outputs Fiber Optic Ring 5 rete isc e In D iscret D t Ou H I.S. FOUNDATION TM DC3 (Remote I/O) DF 4 - ma Inputs Channel Intrinsic Safety Barrier FOUNDATION TM FISCO Communication Server Channel 8 DFI3 Redundant Controller Communication Server All-in-one Station Fieldbus PA Maintenance and Asset Management DP DFI3 PROFIBUS DP and PA et ern Eth Maintenance DFI3 Redundant Controller Communication Server Operation HI3 HART/FOUNDATION TM Engineering DFI3 DeviceNet 4 - ma Router or Firewall Corporate Network Internet I.S. Discrete I/O DFI3 (Cotroller with I/O modules) 4 - ma I.S. Discrete I/O DFI3 AS-i Auto Tuning Advanced Control - MES (Manufacturing Execution System) - ERP (Enterprise Resource Planning) - CRM (Customer Relationship Management Communication Server Alarm and Asset Management Maintenance Modbus TCP Modbus RTU Matrix Printer Package Units Legacy Systems CLP F&G ESD Internet Communication Server Laser Printer Server Server System3 Architecture

16 Main Smar Products Pressure Pressure, Level and Flow Level Density/Concentration 4- ma LD9 LD9 LD. LD3 LD4 RD4 DT3 LD9 LD3 DT3 LD93 LD33 DT33 Pressure Transmitter Gauge Economic Capacitive Pressure Transmitter Pressure Transmitter Pressure Transmitter with high performance Level Transmitter Intelligent Density / Concentration Transmitter Position FY3 FY3 TP3 FY3 FY4 FY3 TP3 FY33 FY33 TP33 Valve Positioner Valve Positioner with auto tuning Valve Positioner with remote sensor Position Transmitter Temperature Junction Box TT3 TT4 4- ma 4- ma TT3 TT33 TT4 Temperature Transmitter Panel Mounting Temperature Transmitter Head Mouting Temperature Transmitter 3 Ways Junction Box JM 4 Ways Junction Box JM4 Configurators Interfaces HART Configurator Interface CONF4 HART Configurator Interface DDCON HART Configurator for Palm HPC3 HART-RS3 Interface HI3 HART-USB Interface HI3 6

17 Main Smar Products Converters FP3 IF3 FI3 FP33 IF33 FI33 Fieldbus to Pneumatic Signal Converter Current to Fieldbus Converter Fieldbus to Current Converter HART / Fieldbus Interface HI3 HART / Current Converter HCC3 Controllers TM DeviceNet TM DeviceNet Programmable Logical Controller LC7 Digital Controller CD6Plus Systems Interface Universal Fieldbus DFI3 TM DeviceNet TM DeviceNet ProcessView Process Visualization Tool Studio3 System3 Management Tool AssetView On Line Plant Asset Management Tool TM DeviceNet Syscon System Configurator Equipment Database Plant Information Management LogicView IEC63 Programming Tool 7

18 smar Specifications and information are subject to change without notice. Up-to-date address information is available on our website. web: Copyright 6 - Smar International - all rights reserved. - November/