STT 3000 Smart Temperature Transmitter Series STT170 Specifications

Size: px
Start display at page:

Download "STT 3000 Smart Temperature Transmitter Series STT170 Specifications"

Transcription

1 STT 3000 Smart Temperature Transmitter Series STT170 Specifications Model STT171, STT173, STT17H, STT17F, STT17C 34-TT November 2010 Overview STT17H Features The Honeywell STT170 series of programmable temperature transmitters provides cost effective solutions for temperature monitoring applications. Compared to direct-wired temperature sensor monitoring points, the STT170 series of transmitters delivers increased accuracy, safety and reliability while also reducing wiring costs. These transmitters automatically linearize the temperature output signal bounded by the upper range value and lower range value established by the user. In addition, the user can program high or low limit alarms to activate in the case of sensor failure. STT171 Features Analog 4-20 ma output HART /4-20 ma output RTD, T/C, Ohm or mv input Single or dual (difference or average) sensor input DIN form B headmount HART Multidrop capable NAMUR NE43 sensor error response Configurable using STT17C configuration tool and PC or Galvanic isolation RTD or Ohm input DIN form B headmount NAMUR NE43 sensor error response Configurable using STT17C configuration tool and PC STT173 Features STT17F FEATURES Analog 4-20 ma output RTD, T/C, Ohm or mv input DIN form B headmount NAMUR NE43 sensor error response Configurable using STT17C configuration tool and PC Galvanic isolation FOUNDATION fieldbus protocol RTD, T/C, Ohm or mv input Single or dual (difference, average or redundant) sensor input DIN form B headmount Function blocks: 2 analogue, 1 PID FISCO certified Basic or LAS capability Galvanic isolation

2 STT 3000 Smart Temperature Transmitter 2 Dimensions (all models) Wiring STT171 STT173 Input: Input: RTD, 2-wire RTD, 3-wire RTD, 4-wire TC, internal CJC RTD, 2-wire RTD, 3-wire Resistance, 2-wire Resistance, 3-wire TC, external CJC mv Resistance, 2-wire Resistance, 3-wire Output: 2-wire installation Resistance, 4-wire Output: 2-wire installation

3 STT 3000 Smart Temperature Transmitter 3 Wiring STT17H Input: STT17F RTD, 2-wire RTD, 3-wire RTD, 4-wire TC, internal CJC Input: RTD, 2-wire RTD, 3-wire RTD, 4-wire 2X RTD, 2-wire TC, external CJC mv Resistance, 2-wire Resistance, 3-wire 2X RTD, 2- / 3-wire Resistance, 2-wire Resistance, 3-wire Resistance, 4-wire Resistance, 4-wire RTD, difference or average TC, difference or average with internal CJC TC, difference or average with external CJC 2X resistance, 2- / 3-wire TC, internal CJC TC, 2-wire external CJC TC, 3-wire external CJC mv, difference or average Output: 2-wire installation 2x TC, internal CJC 2x TC, 2-wire CJC mv 2x mv Potmeter, 3-wire Potmeter cabel compensation Two 3-wire potmeters Connections with two sensors can be configured for 2 measurements, difference, average, or redundancy

4 STT 3000 Smart Temperature Transmitter 4 STT17C Configuration tool The STT17C configures the STT171, STT173 and STT17H. The intuitive graphical user interface of the STT17C virtually eliminates the need for operator training after installation on a PC. The STT17C includes all software and transmitter interface hardware necessary to configure the STT171, STT173 and STT17H in non-hazardous work environments. WARNING: The STT17C is not approved for use in Hazardous work environments. System Requirements: Windows 98SE, ME, 2000 and XP with the following recommendations: Memory: 16 MB Display resolution: 800 x 600 Hard disk space: 12 MB

5 STT 3000 Smart Temperature Transmitter 5 STT171-BS Specifications Temperature Effects per 1.0 o C (1.8 o F) Sensor Basic Accuracy* Rated Range Change in Ambient Temperature*** Type Fixed % of Span o C o F Standards Minimum Span** Fixed % of Span Pt o C (0.54 o F) ± to to 1562 IEC o C (45 o F) 0.01 o C (0.018 o F) Ni o C (0.54 o F) ± to to 482 DIN o C (45 o F) 0.01 o C (0.018 o F) 0.2 ± to m *whichever is greater; Total Reference Accuracy = Basic Accuracy **or 50% of upper range value, whichever is greater *** reference temperature 24 o C OPERATING CONDITIONS APPROVALS Ambient temperature, rated. -40 to 85 o C (-40 to 185 o F) Observed Authority requirements: Standard: Humidity 0 to 95% RH (non-cond.) EMC 2004/108/EC Vibration... Max 4g over 25 to 100Hz Emmission and immunity EN ATEX 94/9/EC EN 50014, EN 50020, ELECTRICAL INPUT SPECIFICATIONS EN and EN Supply voltage 8 to 30 VDC FM, ASCN , 3611, 3610 Power supply voltage effect % of span per VDC CSA, CAN / CSA. C22.2 No. 157, E , Warm-up time... 5 min UL 913 Response time (programmable) 0.33 to 60 sec Ex / I.S. approval: KEMA 06 ATEX 0042 X II 1 GD, T80 o C T105 o C CURRENT OUTPUT SPECIFICATIONS EEx ia IIC T4...T6 Signal output range 4 to 20 ma Max. amb. Temperature for T4 85 o C Update time 135 msec Max. amb. Temperature for T6 60 o C Load resistance (V supply - 8) / A Applicable in zone. 0, 1, 2, 20, 21 or 22 0 to 870 FM, applicable in IS, CL I, DIV 1, Grp. A-D, T4 T6 AEx ia IIC ALARM LEVELS NI, CL I, DIV 2, Grp. A-D, T4 T6 Programmable to 4 ma downscale Entity, FM Installation Drawing No to 23 ma upscale CSA, applicable in. IS, CL I, DIV 1, Grp. A-D, T4 T6 NAMUR NE43 Upscale. 23 ma Ex ia IIC, AEx ia IIC NAMUR NE43 Downscale ma Entity, Installation Drawing No Ex / I.S. data: U i (max) 30 VDC I i (max) 120 madc P i (max) 0.84 W L i (max) 10 H C i (max) 1.0 nf Uo (max) 27 VDC Io (max) 7 madc Po (max) 45 m W Lo (max) 35 mh Co (max) 90 nf

6 STT 3000 Smart Temperature Transmitter 6 STT173-BS Specifications

7 STT 3000 Smart Temperature Transmitter 7 STT17H-BS Specifications

8 STT 3000 Smart Temperature Transmitter 8 STT17H-BN Specification Temperature Effects per 1.0 o C (1.8 o F) Sensor Basic Accuracy* Rated Range Change in Ambient Temperature*** Type Fixed % of Span o C o F Standards Minimum Span** Fixed % of Span Pt o C (0.36 o F) ± to to IEC o C (18 o F) 0.01 o C (0.018 o F) Pt o C (0.36 o F) ± to to IEC o C (18 o F) 0.01 o C (0.018 o F) Ni o C (0.54 o F) ± to to +482 DIN o C (18 o F) 0.01 o C (0.018 o F) B 1 o C (1.8 o F) ± to to IEC o C (180 o F) 0.2 o C (0.36 o F) E 0.5 o C (0.9 o F) ± to to IEC o C (90 o F) 0.05 o C (0.09 o F) J 0.5 o C (0.9 o F) ± to to IEC o C (90 o F) 0.05 o C (0.09 o F) K 0.5 o C (0.9 o F) ± to to IEC o C (90 o F) 0.05 o C (0.09 o F) L 0.5 o C (0.9 o F) ± to to DIN o C (90 o F) 0.05 o C (0.09 o F) N 0.5 o C (0.9 o F) ± to to IEC o C (90 o F) 0.05 o C (0.09 o F) R 1 o C (1.8 o F) ± to to IEC o C (180 o F) 0.2 o C (0.36 o F) S 1 o C (1.8 o F) ± to to IEC o C (180 o F) 0.2 o C (0.36 o F) T 0.5 o C (0.9 o F) ± to to +752 IEC o C (90 o F) 0.05 o C (0.09 o F) U 0.5 o C (0.9 o F) ± to to DIN o C (90 o F) 0.05 o C (0.09 o F) W3 1 o C (1.8 o F) ± to to ASTM E o C (180 o F) 0.2 o C (0.36 o F) W5 1 o C (1.8 o F) ± to to ASTM E o C (180 o F) 0.2 o C (0.36 o F) 0.1 ± to m mv 10 V ± to 800 mv 5 mv 0.5 V *whichever is greater; Total Reference Accuracy = Basic Accuracy + CJ Accuracy (T/C only) **or 50% of upper range value, whichever is greater *** reference temperature 24 o C OPERATING CONDITIONS APPROVALS Ambient temperature, rated to 85 o C (-40 to 185 o F) Observed Authority requirements: Standard: Humidity 0 to 95% RH (non-cond.) EMC 2004/108/EC Vibration... Max 4g over 25 to 100Hz Emmission and immunity EN Cold junction accuracy ±1.0 o C ATEX 94/9/EC EN , EN ELECTRICAL INPUT SPECIFICATIONS Ex / I.S. approval: Supply Voltage 8 to 35 VDC KEMA 06 ATEX 0043 X II 3 GD, T80 o C T105 o C Power supply voltage effect % of span per VDC EEx na [L] IIC T4...T6 Warm-up time sec Applicable in zone 2 Response time (programmable) 1 to 60 sec Max. amb. Temperature for T o C Galvanic isolation VAC Max. amb. Temperature for T o C CURRENT OUTPUT SPECIFICATIONS Signal output range 4 to 20 ma Update time 440 msec Load resistance (.... (V supply - 8) / A 0 to 1174 Vmax 35V ALARM LEVELS Programmable 3.5 to 4 ma downscale 20 to 23 ma upscale NAMUR NE43 Upscale. 23 ma NAMUR NE43 Downscale ma

9 STT 3000 Smart Temperature Transmitter 9 STT17F-BS Specifications Temperature Effects per 1.0 o C (1.8 o F) Sensor Basic Accuracy* Rated Range Change in Ambient Temperature** Type Fixed % of reading o C o F Standards Fixed % of reading Pt o C (0.36 o F) ± to to IEC o C (0.018 o F) Pt o C (0.36 o F) ± to to IEC o C (0.018 o F) Ni o C (0.54 o F) ± to to +482 DIN o C (0.018 o F) Cu o C (2.3 o F) ± to to +392 = o C (0.036 o F) B 1 o C (1.8 o F) ± to to IEC o C (0.36 o F) E 0.5 o C (0.9 o F) ± to to IEC o C (0.09 o F) J 0.5 o C (0.9 o F) ± to to IEC o C (0.09 o F) K 0.5 o C (0.9 o F) ± to to IEC o C (0.09 o F) L 0.5 o C (0.9 o F) ± to to DIN o C (0.09 o F) N 0.5 o C (0.9 o F) ± to to IEC o C (0.09 o F) R 1 o C (1.8 o F) ± to to IEC o C (0.36 o F) S 1 o C (1.8 o F) ± to to IEC o C (0.36 o F) T 0.5 o C (0.9 o F) ± to to +752 IEC o C (0.09 o F) U 0.5 o C (0.9 o F) ± to to DIN o C (0.09 o F) W3 1 o C (1.8 o F) ± to to ASTM E o C (0.36 o F) W5 1 o C (1.8 o F) ± to to ASTM E o C (0.36 o F) 0.05 ± to m mv 10 V ± to 800 mv 0.2 V *whichever is greater; Total Reference Accuracy = Basic Accuracy + CJ Accuracy (T/C only) ** reference temperature 24 o C OPERATING CONDITIONS APPROVALS Ambient temperature, rated to 85 o C (-40 to 185 o F) Observed Authority requirements: Standard: Humidity 0 to 95% RH (non-cond.) EMC 2004/108/EC Vibration... Max 4g over 25 to 100Hz Emmission and immunity EN Cold junction accuracy... ±0.5 o C ATEX 94/9/EC EN 50014, EN 50020, EN , EN 50284, ELECTRICAL INPUT SPECIFICATIONS and IEC (FISCO) Supply Voltage 9 to 30 VDC FM, ASCN 3600, 3611, 3610 In FISCO installations 9 to 17.5 VDC CSA, CAN / CSA C22.2 No. 142, No. 157 Consumption < 11 ma CAN / CSA E , E , Warm-up time.. 30 sec E , UL913, UL1604 Response time (programmable) 1 to 60 sec Galvanic isolation 1500 VAC Ex / I.S. approval: Update time.. < 400 msec KEMA 06 ATEX II 1 GD, T65 o C T105 o C Execution time, PID controller.< 200 msec EEx ia IIC T4 T6 Execution time, analogue input < 50 msec Ex II 2(1) GD, T65oC T105oC EEx ib [ia] IIC T4 T6 OUTPUT SPECIFICATIONS Applicable in zone 0, 1, 2, 20, 21 or 22 Foundation TM Fieldbus connection: FM, applicable in IS, CL I, DIV 1, Grp. A-D, T4 T6 Foundation TM Fieldbus version.. ITK 4.6 AEx ia IIC Foundation TM F. capability Basic or LAS NI, CL I, DIV 2, Grp. A-D, T4 T6 Foundation TM F. function blocks. 2 analogue and 1 PID Entity, FM Installation Drawing No CSA, applicable in IS, CL I, DIV 1, Grp. A-D, T4 T6 Ex ia IIC, AEx ia IIC CL I, DIV 2, Grp. A-D, T4 T6 Entity, CSA Installation Drawing No Ex / I.S. data: Ex / I.S. data: Class I, Zone 0, EEx ia IIC, Entity/FISCO IS, Class I, Division 1, Group A, B, C, D, Entity/FISCO Barrier where Barrier where Suitable for Suitable for Unit Unit Po < 0.84 W Po < 1.3 W FISCO systems FISCO systems Ui Ui 30 VDC 30 VDC 17.5 VDC 15 VDC Ii Ii 120 madc 300 madc 250 madc 900 madc Pi Pi 0.84 W 1.3 W 2.0 W 5.32 W Li Li 1 H 1 H 1 H 1 H Ci Ci 2.0 nf 2.0 nf 2.0 nf 2.0 nf T1 T4 T1 T4 Tamb. < 85 o C Tamb. < 75 o C Tamb. < 85 o C Tamb. < 85 o C T5 T5 Tamb. < 70 o C Tamb. < 65 o C Tamb. < 60 o C Tamb. < 60 o C T6 T6 Tamb. < 60 o C Tamb. < 45 o C Tamb. < 45 o C Tamb. < 45 o C Class I, Zone 1, EEx ib IIC, Entity/FISCO IS, Class I, Division 2, Group A, B, C, D, Entity/FISCO Barrier where Po < 5.32 W FISCO segment coupler 30 VDC 17.5 VDC 250 madc All 5.32 W All 1 H 1 H 2.0 nf 2.0 nf Tamb. < 85 o C Tamb. < 85 o C Tamb. < 75 o C Tamb. < 75 o C Tamb. < 60 o C Tamb. < 60 o C

10 STT 3000 Smart Temperature Transmitter 10 STT17F-BN Specifications Temperature Effects per 1.0 o C (1.8 o F) Sensor Basic Accuracy* Rated Range Change in Ambient Temperature** Type Fixed % of reading o C o F Standards Fixed % of reading Pt o C (0.36 o F) ± to to IEC o C (0.018 o F) Pt o C (0.36 o F) ± to to IEC o C (0.018 o F) Ni o C (0.54 o F) ± to to +482 DIN o C (0.018 o F) Cu o C (2.3 o F) ± to to +392 = o C (0.036 o F) B 1 o C (1.8 o F) ± to to IEC o C (0.36 o F) E 0.5 o C (0.9 o F) ± to to IEC o C (0.09 o F) J 0.5 o C (0.9 o F) ± to to IEC o C (0.09 o F) K 0.5 o C (0.9 o F) ± to to IEC o C (0.09 o F) L 0.5 o C (0.9 o F) ± to to DIN o C (0.09 o F) N 0.5 o C (0.9 o F) ± to to IEC o C (0.09 o F) R 1 o C (1.8 o F) ± to to IEC o C (0.36 o F) S 1 o C (1.8 o F) ± to to IEC o C (0.36 o F) T 0.5 o C (0.9 o F) ± to to +752 IEC o C (0.09 o F) U 0.5 o C (0.9 o F) ± to to DIN o C (0.09 o F) W3 1 o C (1.8 o F) ± to to ASTM E o C (0.36 o F) W5 1 o C (1.8 o F) ± to to ASTM E o C (0.36 o F) 0.05 ± to m mv 10 V ± to 800 mv 0.2 V *whichever is greater; Total Reference Accuracy = Basic Accuracy + CJ Accuracy (T/C only) ** reference temperature 24 o C OPERATING CONDITIONS APPROVALS Ambient temperature, rated to 85 o C (-40 to 185 o F) Observed Authority requirements: Standard: Humidity 0 to 95% RH (non-cond.) EMC 2004/108/EC Vibration... Max 4g over 25 to 100Hz Emmission and immunity EN Cold junction accuracy... ±0.5 o C ATEX 94/9/EC EN , EN Reference temperature 20 to 28 o C FM, ASCN 3600, 3611 CSA, CAN / CSA C22.2 No. 142, No. 213 ELECTRICAL INPUT SPECIFICATIONS CAN / CSA E , E , Supply Voltage 9 to 32 VDC UL1604 Consumption < 11 ma Ex / I.S. approval: Warm-up time.. 30 sec KEMA 06 ATEX 0045 X.. II 3 G Response time (programmable) 1 to 60 sec EEx na [L] IIC T4 T6 Galvanic isolation 1500 VAC Applicable in zone 2 Update time.. < 400 msec FM, applicable in NI, CL I, DIV 2, Grp. A-D, T4 Execution time, PID controller.< 200 msec FNICO Execution time, analogue input < 50 msec Entity, FM Installation Drawing No CSA, applicable in CL I, DIV 2, Grp. A-D, T4 T OUTPUT SPECIFICATIONS CL I, Zone 2, Foundation TM Fieldbus connection: Ex na IIC, AEx na IIC Foundation TM Fieldbus version.. ITK 4.6 Entity, CSA, Installation Drawing No Foundation TM F. capability Basic or LAS Max. amb. Temperature for T4 85 o C Foundation TM F. function blocks. 2 analogue and 1 PID Max. amb. Temperature for T6 60 o C Vmax 32V Li 1 H Ci 2.0 nf

11 STT 3000 Smart Temperature Transmitter 11 STT171 Custom Configuration Data Sheet Customer P.O. Number Line Item Model Number Tag Number (max 15 char) Honeywell Sales Order Number Sensor Type: Pt100 Ni100 Ohms Output Values: 4 ma Value: 20 ma Value: Response time: o C o C ( sec) o F o F Ohms Ohms Output Limits: Span (4 to 20 ma) Max (3.5 to 23 ma) Specify Low ma, High ma NAMUR NE 43 (3.8 to 20.5 ma) Sensor Error Action: Off Specify ma NAMUR NE 43 upscale (23 ma) NAMUR NE 43 downscale (3.5 ma)

12 STT 3000 Smart Temperature Transmitter 12 STT173 Custom Configuration Data Sheet Customer P.O. Number Line Item Model Number Tag Number (max 15 char) Honeywell Sales Order Number Sensor Type: Pt100 Type B T/C Cold Junction Compensation: Ni100 Type E T/C Internal Type J T/C External / Pt100 Wiring: Type K T/C External / Ni100 2-wire Type L T/C 3-wire Type N T/C 4-wire Type R T/C Type S T/C Ohms Type T T/C mv Type U T/C Type W3 T/C Type W5 T/C Output Values: 4 ma Value: 20 ma Value: Response time: o C o C (1 60 sec) o F o mv mv Ohms Ohms Output Limits: Span (4 to 20 ma) Max (3.5 to 23 ma) Specify Low ma, High ma NAMUR NE 43 (3.8 to 20.5 ma) Sensor Error Action: Off Specify ma NAMUR NE 43 upscale (23 ma) NAMUR NE 43 downscale (3.5 ma)

13 STT 3000 Smart Temperature Transmitter 13 STT17H Custom Configuration Data Sheet Customer P.O. Number Line Item Model Number Tag Number (max 15 char) Honeywell Sales Order Number Sensor Input: Single Sensor Duplex Sensor (Average) Duplex Sensor (Differential) Sensor Type: Pt100 Type B T/C Cold Junction Compensation: Ni100 Type E T/C Internal Type J T/C External / Pt100 Wiring: Type K T/C External / Ni100 2-wire Type L T/C 3-wire Type N T/C 4-wire Type R T/C Type S T/C Ohms Type T T/C mv Type U T/C Type W3 T/C Type W5 T/C Output Values: 4 ma Value: 20 ma Value: Response time: o C o C (1 60 sec) o F o mv Ohms mv Ohms Output Limits: Span (4 to 20 ma) Max (3.5 to 23 ma) Specify Low ma, High ma NAMUR NE 43 (3.8 to 20.5 ma) Sensor Error Action: Off Specify ma NAMUR NE 43 upscale (23 ma) NAMUR NE 43 downscale (3.5 ma)

14 STT 3000 Smart Temperature Transmitter 14 STTF Custom Configuration Data Sheet Customer P.O. Number Line Item Model Number Tag Number (max 15 char) Honeywell Sales Order Number TRANSDUCER BLOCK PARAMETERS Temperature Units Sensor Input o C Single Sensor o F Duplex Sensor (Average) mv Duplex Sensor (Differential #1 - #2) Ohms Sensor Type (Sensor 1, Sensor 2): Pt100 Type B T/C Cold Junction Compensation: Ni100 Type E T/C Internal Pt500 Type J T/C External / Pt100 2-w Pt1000 Type K T/C External / Ni100 3-w Ni100 Type L T/C Cu10 Type N T/C Type R T/C Wiring: Type S T/C 2-wire Type T T/C Ohms mv 3-wire 4-wire Type U T/C Type W3 T/C Type W5 T/C Sensor Error Detection: Sensor #1 Lead breakage and short circuit detection disable Lead breakage and short circuit enable Lead breakage detection enable, short circuit detection disable Lead breakage detection disable, short circuit detection enable Sensor #2 Lead breakage and short circuit detection disable Lead breakage and short circuit enable Lead breakage detection enable, short circuit detection disable Lead breakage detection disable, short circuit detection enable

15 STT 3000 Smart Temperature Transmitter 15 Model Selection Guide ( ) Model Selection Guides are subject to change and are inserted into the specifications as guidance only. Prior to specifying or ordering a model check for the latest revision Model Selection Guides which are published at:

16 STT 3000 Smart Temperature Transmitter 16 Model Selection Guide, ( ) cont.

17 STT 3000 Smart Temperature Transmitter 17 HART* is a trademark of the Hart Communication Foundation. FOUNDATION is a trademark of the Fieldbus Foundation. Windows is a registered trademark of Microsoft Corporation. For More Information Learn more about how Honeywell s Smart Temperature Transmitter can provide cost-effective solutions for temperature monitoring applications, visit our website or contact your Honeywell account manager. Honeywell Process Solutions 1860 West Rose Garden Lane Phoenix, Arizona Tel: or TT November Honeywell International Inc.

STT 3000 Series STT170 SMART TEMPERATURE TRANSMITTER Models STT171, STT173, STT17H, STT17F, STT17C

STT 3000 Series STT170 SMART TEMPERATURE TRANSMITTER Models STT171, STT173, STT17H, STT17F, STT17C STT 3000 Series STT170 SMART TEMPERATURE TRANSMITTER Models STT171, STT173, STT17H, STT17F, STT17C 34-TT-03-07 3/06 PRODUCT SPECIFICATION SHEET OVERVIEW The Honeywell STT170 series of programmable temperature

More information

STT 3000 Series STT170 SMART TEMPERATURE TRANSMITTER Models STT171, STT173, STT17H, STT17F, STT17C

STT 3000 Series STT170 SMART TEMPERATURE TRANSMITTER Models STT171, STT173, STT17H, STT17F, STT17C STT 3000 Series STT170 SMART TEMPERATURE TRANSMITTER Models STT171, STT173, STT17H, STT17F, STT17C 6/07 PRODUCT SPECIFICATION SHEET OVERVIEW The Honeywell STT170 series of programmable temperature transmitters

More information

MODEL: B3HU. Space-saving Two-wire Signal Conditioners B3-UNIT

MODEL: B3HU. Space-saving Two-wire Signal Conditioners B3-UNIT Space-saving Two-wire Signal Conditioners B3-UNIT 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER (HART communication, intrinsically safe) Functions & Features Universal input: mv, V, T/C, RTD, resistance, potentiometer

More information

Temperature transmitter itemp PCP DIN rail TMT 121

Temperature transmitter itemp PCP DIN rail TMT 121 Technical information TI 087R/09/en 510 03671 Temperature transmitter itemp PCP DIN rail TMT 121 Universal temperature transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage

More information

Universal Intelligent 2-wire DIN Rail Transmitters

Universal Intelligent 2-wire DIN Rail Transmitters Universal Intelligent 2-wire DIN Rail Transmitters IPAQ-L is a universal and intelligent 2-wire DIN rail transmitter for temperature and other measurement applications. IPAQ-LX is the Intrinsic Safe version

More information

Digital Temperature Transmitters Model T12.10, Universally Programmable, Head Mounting Model T12.30, Universally Programmable, Rail Mounting

Digital Temperature Transmitters Model T12.10, Universally Programmable, Head Mounting Model T12.30, Universally Programmable, Rail Mounting Electrical Temperature Measurement Digital Temperature Transmitters Model T12.10, Universally Programmable, Head Mounting Model T12.30, Universally Programmable, Rail Mounting WIKA Data Sheet TE 12.03

More information

TF 02 / TF 02-Ex. Head mounted temperature transmitters, FOUNDATION Fieldbus (H1), Pt 100 (RTD), thermocouples, 1 or 2 independent channels

TF 02 / TF 02-Ex. Head mounted temperature transmitters, FOUNDATION Fieldbus (H1), Pt 100 (RTD), thermocouples, 1 or 2 independent channels TF 0 / TF 0-Ex Head mounted temperature transmitters, FOUNDATION Fieldbus (H), Pt 00 (RTD), thermocouples, or independent channels 0/-8.5 EN Input Resistance thermometer (,, wire circuit) Thermocouples

More information

C520 / C520X /C520S / C520XS HART Compatible, Universal, Dual-input 2-wire Transmitters

C520 / C520X /C520S / C520XS HART Compatible, Universal, Dual-input 2-wire Transmitters C520 / C520X /C520S / C520XS HART Compatible, Universal, Dual-input 2-wire Transmitters The 520 transmitters are universal, isolated, dual-input temperature transmitters with additional voltage and resistance

More information

0 2 1 â Ó. itemp HART TMT182. Technical Information

0 2 1 â Ó. itemp HART TMT182. Technical Information Technical Information itemp HART TMT182 Temperature head transmitter Head transmitter for resistance thermometers (RTD), thermocouples (TC), resistance and voltage transmitters (mv), HART -protocol, for

More information

2-WiRE LEvEL TRansmiTTER PRELEvEL 5343 ConTEnTs

2-WiRE LEvEL TRansmiTTER PRELEvEL 5343 ConTEnTs 2-wire level transmitter PRelevel 5343 Contents EC declaration of conformity... 14 Application... 15 Technical characteristics... 15 Mounting / installation... 15 Applications... 16 Electrical specifications...

More information

Wireless Temperature Transmitters Series XYR 5000, Model WT5xx/WT5xxR/WT5xxT Specifications - Americas

Wireless Temperature Transmitters Series XYR 5000, Model WT5xx/WT5xxR/WT5xxT Specifications - Americas Wireless Temperature Transmitters Series XYR 5000, Model WT5xx/WT5xxR/WT5xxT Specifications - Americas 34-XY-03-02 February 2008 Function The WT5xx Temperature Transmitter is part of the XYR 5000 family

More information

C330 / C330X PC-Programmable Universal, 2-wire Transmitter

C330 / C330X PC-Programmable Universal, 2-wire Transmitter C330 / C330X PC-Programmable Universal, 2-wire Transmitter The IPAQ C330 transmitter is a universal, isolated, temperature transmitter with additional voltage and resistance input. Its robust design and

More information

itemp PA TMT184 Technical information

itemp PA TMT184 Technical information Technical information itemp PA TMT184 Temperature head transmitter with PROFIBUS-PA interface. Supply and digital communication using PROFIBUS-PA, for installation in a Form B sensor head. Features and

More information

Wireless Dual Discrete Input Transmitter Series XYR 5000, Model WW59x Specifications - Americas

Wireless Dual Discrete Input Transmitter Series XYR 5000, Model WW59x Specifications - Americas Wireless Dual Discrete Input Transmitter Series XYR 5000, Model WW59x Specifications - Americas 34-XY-03-12 February 2008 Function The WW59x Dual Discrete Input Field Transmitter is part of the XYR 5000

More information

R88000 T (including ATEX)

R88000 T (including ATEX) INSTRUCTION MANUAL R88000 T88000 (including ATEX) Factory set transmitters are ready to use. Connect according the labels. Otherwise follow the calibration instructions. Input signals ṮC RTD CONTENTS:

More information

0 2 1 â Ó. itemp HART TMT182. Technical Information

0 2 1 â Ó. itemp HART TMT182. Technical Information Technical Information itemp HART TMT182 Temperature head transmitter Head transmitter for resistance thermometers (RTD), thermocouples (TC), resistance and voltage transmitters (mv), HART -protocol, for

More information

MODEL: B6U-B B6-UNIT. [2] LCD DISPLAY 0: Without 1: With

MODEL: B6U-B B6-UNIT. [2] LCD DISPLAY 0: Without 1: With Field-mounted Two-wire Signal Conditioners B6-UNIT 8: TIIS flameproof (CE not available) Confirm selectable combinations of approval and wiring conduit types in the table. 2-WIRE UNIVERSAL TEMPERATURE

More information

Temperature head transmitter itemp PCP TMT 181

Temperature head transmitter itemp PCP TMT 181 Technical information TI 070R/09/en Mat.-Nr.: 510 01110 Temperature head transmitter itemp PCP TMT 181 Universal head transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage

More information

SEM210 SERIES. Programmable In-head Universal Temperature Transmitter INDEX SECTION CONTENTS PAGE NO.

SEM210 SERIES. Programmable In-head Universal Temperature Transmitter INDEX SECTION CONTENTS PAGE NO. INDEX SECTION CONTENTS PAGE NO. SEM210 SERIES 1.0 DESCRIPTION 1 2.0 SPECIFICATION 15 3.0 INSTALLATION 67 Programmable Inhead Universal Temperature Transmitter Status Instruments Ltd, Green Lane Business

More information

Head mounted Temperature Transmitter TF02/TF02-Ex

Head mounted Temperature Transmitter TF02/TF02-Ex Data Sheet Head mounted Temperature Transmitter TF0/TF0-Ex FOUNDATION Fieldbus H, Pt 00 (RTD), thermocouples, or independent channels Input Resistance thermometer (-, -, -wire circuit) Thermocouples Resistance

More information

SITRANS T measuring instruments for temperature

SITRANS T measuring instruments for temperature SITRANS T measuring instruments for temperature /2 Product overview /6 Transmitter for mounting in sensor head /6 SITRANS TH100, two-wire system (Pt100) /9 SITRANS TH200, two-wire system universal /15

More information

itemp HART DIN rail TMT112

itemp HART DIN rail TMT112 Temperature transmitter itemp HART DIN rail TMT112 Universal temperature transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage transmitters, incorporating HART protocol Application

More information

Universal Intelligent 2-wire In-head Transmitters

Universal Intelligent 2-wire In-head Transmitters Universal Intelligent 2-wire In-head Transmitters Actual size IPAQ-H is a universal and intelligent 2-wire In-head transmitter for temperature and other measurement applications. IPAQ-HX is the Intrinsic

More information

Universal Intelligent 2-wire DIN Rail Transmitters

Universal Intelligent 2-wire DIN Rail Transmitters Universal Intelligent 2-wire DIN Rail Transmitters IPAQ-L is a universal and intelligent 2-wire DIN rail transmitter for temperature and other measurement applications. IPAQ-LX is the Intrinsic Safe version

More information

Product Manual wire HART transmitter

Product Manual wire HART transmitter Product Manual 6335 2wire HART transmitter PERFORMANCE MADE SMARTER TEMPERATURE I.S. INTERFACES COMMUNICATION INTERFACES MULTIFUNCTIONAL ISOLATION DISPLAY No. 6335V111UK From serial no.: 150951186 6 Product

More information

Model 144H NEW. PC-Programmable Temperature Transmitter. Product Data Sheet

Model 144H NEW. PC-Programmable Temperature Transmitter. Product Data Sheet Product Data Sheet 00813-0101-4796 Model 144H PC-Programmable Temperature Transmitter FEATURES Configurable using the Model 144C Configuration Interface hardware and software Programmable via standard

More information

600T Series Transmitters. Specification Sheet. Model 653T Electronic temperature transmitter (PC programmable)

600T Series Transmitters. Specification Sheet. Model 653T Electronic temperature transmitter (PC programmable) Specification Sheet 600T Series Transmitters Model 65T Electronic temperature transmitter (PC programmable) High flexibility and wide rangeability Single transmitter accepts RTD/THC/mV/ohm Galvanically

More information

STT 3000 Smart Temperature Transmitter

STT 3000 Smart Temperature Transmitter STT 3000 Smart Temperature Transmitter Foundation TM Fieldbus Model STT35F Introduction EN0I-6083 April 2009 Specification and Model Selection Guide Honeywell s microprocessor based STT35F Smart Temperature

More information

Rosemount 148 Temperature Transmitter

Rosemount 148 Temperature Transmitter Product Data Sheet Rosemount 148 Rosemount 148 Temperature Transmitter Provides an installation-ready solution for temperature monitoring applications using Complete Point Solutions (CPS) Increases measurement

More information

Temperature head transmitter itemp PCP TMT 181

Temperature head transmitter itemp PCP TMT 181 Technical information TI 070R/09/en Mat.-Nr.: 510 01110 Temperature head transmitter itemp PCP TMT 181 Universal head transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage

More information

MCR-FL-TS-LP-I-EX SIL IEC Programmable Intrinsically Safe Loop-Powered Temperature Measuring Transducer With HART Protocol

MCR-FL-TS-LP-I-EX SIL IEC Programmable Intrinsically Safe Loop-Powered Temperature Measuring Transducer With HART Protocol SIL IEC 6 508 Programmable Intrinsically Safe Loop-Powered Temperature Measuring Transducer With HART Protocol Data Sheet 0068_en_03 PHOENIX CONTACT 0-07-09 Description Temperature FL ϑ Universal PC programmable

More information

Product Guide. universal. isolation. i.s. interface. temperature. display

Product Guide. universal. isolation. i.s. interface. temperature. display Product Guide universal isolation i.s. interface temperature S I G N A L S T H E B E S T display introduction PR electronics Founded in 974, PR electronics is today one of Europe s leading developers and

More information

Temperature Measurement

Temperature Measurement Siemens AG 015 / Product overview Transmitters for mounting in sensor head /4 SITRANS TH100 two-wire system (Pt100) /8 SITRANS TH00 two-wire system universal /15 SITRANS TH00 two-wire system universal,

More information

General Specifications

General Specifications General Specifications YTA70 Temperature Transmitter The YTA70 is the highly accurate temperature transmitter that accepts Thermocouple, RTD, ohms or DC millivolts inputs and converts it to a to 0 ma DC

More information

Temperature Measurement Transmitters for mounting in sensor head

Temperature Measurement Transmitters for mounting in sensor head Siemens AG 015 SITANS TH00 two-wire system, universal Overview Application SITANS TH00 transmitters can be used in all industrial sectors. Due to their compact size they can be installed in the connection

More information

PRODUCT SPECIFICATION AND MODEL SELECTION GUIDE

PRODUCT SPECIFICATION AND MODEL SELECTION GUIDE XYR 5000 Wireless Temperature Transmitters WT530 34-XY-03-02 09/2006 PRODUCT SPECIFICATION AND MODEL SELECTION GUIDE Function The WT530 Temperature Transmitter is part of the XYR 5000 family of wireless

More information

CERTIFICATE OF COMPLIANCE

CERTIFICATE OF COMPLIANCE FM Approvals 1151 Boston Providence Turnpike P.O. Box 9102 Norwood, MA 0202 USA T: 781 72 400 F: 781-72-975 www.fmapprovals.com CERTIFICATE OF COMPLIANCE HAZARDOUS (CLASSIFIED) LOCATION ELECTRICAL EQUIPMENT

More information

General Specifications

General Specifications General Specifications EJX Series FOUNDATION TM Fieldbus Communication FOUNDATION fieldbus is the digital communication line for the field instruments, whose signal is internationally standardized by Fieldbus

More information

Temperature Transmitters - Head Mounted

Temperature Transmitters - Head Mounted XTH Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction

More information

Rosemount 148 Temperature Transmitter

Rosemount 148 Temperature Transmitter Product Data Sheet Rosemount 148 Rosemount 148 Temperature Transmitter Ready-to-install solution for temperature monitoring applications Increased measurement accuracy and reliability Accepts 2-, 3-, and

More information

MODEL: 27HU 27-UNIT MODEL: 27HU [1][2]

MODEL: 27HU 27-UNIT MODEL: 27HU [1][2] Head-mounted Two-wire Signal Conditioners 7-UNIT -WIRE UNIVERSL TEMPERTURE TRNSMITTER (HRT communication) Functions & Features Universal input: DC mv, T/C, RTD and resistance High accuracy HRT communication

More information

Temperature transmitter with local display RIT 261

Temperature transmitter with local display RIT 261 Technical Information TI 091R/2/ae Temperature transmitter with local display RIT 261 Universal field mounted transmitter provides an exceptional backlit temperature indication with five large digits and

More information

Temperature head transmitter itemp TC TMT 188

Temperature head transmitter itemp TC TMT 188 Technical information TI 077R/24/ae No.: 510 06145 Temperature head transmitter itemp TC TMT 188 Universal head transmitter for thermocouples for an economical, high accuracy temperature monitoring. Fixed

More information

Digital temperature transmitter with HART protocol Model T32.1S, head mounting version Model T32.3S, rail mounting version

Digital temperature transmitter with HART protocol Model T32.1S, head mounting version Model T32.3S, rail mounting version Electrical temperature measurement Digital temperature transmitter with HART protocol Model T32.1S, head mounting version Model T32.3S, rail mounting version WIKA data sheet TE 32.04 Applications Process

More information

HART Compatible Intelligent 2-wire In-head Transmitters

HART Compatible Intelligent 2-wire In-head Transmitters HART Compatible Intelligent 2-wire In-head Transmitters Actual size MESO-H is a Smart and universal 2-wire Inhead transmitter for temperature and other measurement applications. MESO-HX is the Intrinsic

More information

Product Manual wire HART transmitter

Product Manual wire HART transmitter Product Manual 6337 2wire HART transmitter PERFORMANCE MADE SMARTER TEMPERATURE I.S. INTERFACES COMMUNICATION INTERFACES MULTIFUNCTIONAL ISOLATION DISPLAY No. 6337V103UK From serial no.: 150950564 6 Product

More information

Power supply. Calibration. Surface finishing. Seal. Process connection

Power supply. Calibration. Surface finishing. Seal. Process connection Page 1 of 6 Description The measuring system is designed for flow measurement. Gas flow through the sensing section passes two PT 100 RTD transducers; one is used as a temperature sensing device whilst

More information

Temperature Measurement Transmitters for mounting in sensor head

Temperature Measurement Transmitters for mounting in sensor head Siemens AG 015 Overview SITANS TH00 two-wire system, universal, HAT Application SITANS TH00 transmitters can be used in all industrial sectors. Due to their compact size they can be installed in the connection

More information

Product manual wire programmable RTD transmitter

Product manual wire programmable RTD transmitter Product manual 5332 2-wire programmable RTD transmitter PERFORMANCE MADE SMARTER TEMPERATURE I.S. INTERFACES COMMUNICATION INTERFACES MULTIFUNCTIONAL ISOLATION DISPLAY No. 5332V100-UK From serial no: 181903001

More information

FieldIT Temperature Transmitter, rail mounted TH102/TH102-Ex

FieldIT Temperature Transmitter, rail mounted TH102/TH102-Ex Data Sheet 10/-8.54 EN Level 0: Information FieldIT Temperature Transmitter, rail mounted TH102/TH102-Ex HART programmable, Pt 100 (RTD), thermocouples, electrical isolation Resistance thermometer (2,

More information

Rosemount 148 Temperature Transmitter

Rosemount 148 Temperature Transmitter Product Data Sheet Rosemount 148 Rosemount 148 Temperature Transmitter Basic temperature transmitter offers a cost-effective solution for temperature monitoring points transmitter design provides flexible

More information

Rosemount 148 Temperature Transmitter

Rosemount 148 Temperature Transmitter Product Data Sheet Rosemount 148 Rosemount 148 Temperature Transmitter Ready-to-install solution for temperature monitoring applications Increased measurement accuracy and reliability Accepts 2-, 3-, and

More information

PRetrans Table of contents

PRetrans Table of contents HART TRANSPARENT REPEATER PRetrans 5106 Table of contents Warnings 16 Safety instructions 17 EC Declaration of Conformity 19 How to demount SYSTEM 5000 20 Application 21 Technical characteristics 21 Mounting

More information

Temperature measurement TMD 832 head transmitter

Temperature measurement TMD 832 head transmitter Technical information TI 062R/09/en Mat.-Nr. 510 00782 Temperature measurement TMD 832 head transmitter SMART head transmitter with HART protocol for RTD, Thermocouple and mv input signals Applications

More information

IPAQ C520 / C520X R520 / R520X. HANDBOOK / User Manual

IPAQ C520 / C520X R520 / R520X. HANDBOOK / User Manual IPAQ C520 / C520X R520 / R520X HANDBOOK / User Manual IMPRINT C520/C520X / R520/R520X Copyright All rights reserved. Any duplication of this documentation or extracts thereof by any means is prohibited

More information

Temperature Transmitters - DIN Rail Mounted

Temperature Transmitters - DIN Rail Mounted XTD Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction

More information

HART field temperature transmitter Models TIF50, TIF52, TIF62

HART field temperature transmitter Models TIF50, TIF52, TIF62 Electrical temperature measurement HART field temperature transmitter Models TIF50, TIF52, TIF62 WIKA data sheet TE 62.01 Applications Plant construction Process engineering General industrial applications

More information

Temperature Measurement

Temperature Measurement Siemen AG 00 Temperature Meaurement Overview Application Linearized temperature meaurement with reitance thermometer or thermal element Differential, mean-value or redundant temperature meaurement with

More information

Temperature Measurement

Temperature Measurement Siemens AG 017 / Product overview Transmitters for mounting in sensor head /4 SITRANS TH100 two-wire system (Pt100) /8 SITRANS TH00 two-wire system universal /15 SITRANS TH00 two-wire system universal,

More information

Temperature Measurement

Temperature Measurement Overview Application transmitters can be used in all industrial sectors. Due to their compact size they can be installed in the connection head type B (DIN 4729) or larger. The following sensors/signal

More information

PROGRAMMABLE FIELD TEMPERATURE TRANSMITTER

PROGRAMMABLE FIELD TEMPERATURE TRANSMITTER Configuration Code TM01 Series 642 Programmable HART Field Temperature The Series 642 programmable HART field temperature transmitter is a 2-wire unit with analog output. It includes input for RTDs; resistance

More information

Assembly. Front view. Parametrization interface. Power Bus

Assembly. Front view. Parametrization interface. Power Bus Temperature Converter Features Assembly 1-channel signal conditioner 24 V DC supply Thermocouple, RTD, potentiometer or mv input Input for PTC thermistor Current and voltage output Line fault (LFD) and

More information

Temperature Measurement

Temperature Measurement Siemens AG 00 - Transmitter, two-wire system and - Field indicator for 4 to 0 ma Overview Our field devices for heavy industrial use HART, Universal 4 to 0 ma, universal Field indicator for 4 to 0 ma signals

More information

SEM1600T RTD/TC/SLIDE WIRE SIGNAL CONDITIONER

SEM1600T RTD/TC/SLIDE WIRE SIGNAL CONDITIONER RTD, THERMOCOUPLE, THERMISTOR (BMS SENSORS), SLIDE WIRE, mv AND RESISTANCE INPUTS ma, VOLTAGE OR BIPOLAR VOLTAGE OUTPUT SENSOR OFFSET (TEMPERATURE) 22 SEGMENT USER LINEARISATION (PROCESS) CONFIGURATION

More information

Two-Wire Programmable Transmitter for:

Two-Wire Programmable Transmitter for: TM Smart Process Instrumentation Revision 2 Two-Wire Programmable Transmitter for: Industrial Thermocouple or RTD Temperature Measurements Highlights: Exceptional speed and accuracy Guaranteed measurement

More information

SITRANS T measuring instruments for temperature

SITRANS T measuring instruments for temperature Overview Our field devices for heavy industrial use HART, Universal 4 to 20 ma, universal Field indicator for 4 to 20 ma signals The temperature transmitter SITRANS TF works where others feel uncomfortable.

More information

3 Ex i Isolators. Temperature Transmitter without Output 0/ ma, with Limit Value Contact (Field Circuit Ex i) Type 9182/.

3 Ex i Isolators. Temperature Transmitter without Output 0/ ma, with Limit Value Contact (Field Circuit Ex i) Type 9182/. Ex i Isolators Temperature Transmitter without Output 0/4... 20 ma, with Limit Value Contact Field Circuit Ex i) One unit for nearly all temperature sensors indivdually configurable Intrinsically safe

More information

SEM210 SEM210X UNIVERSAL TEMPERATURE TRANSMITTER

SEM210 SEM210X UNIVERSAL TEMPERATURE TRANSMITTER UNIVERSAL INPUT, DUAL CHANNEL ATEX & IEC Ex Version MATHS FUNCTIONS SENSOR CHARACTERISTICS DOWNLOAD VIA USB PORT ALLOWS FOR CUSTOM TYPES FLASH TESTED TO 4 KV DC INTRODUCTION The SEM210 is a universal transmitter

More information

FieldIT Temperature Transmitter, field mounted TH202/TH202-Ex

FieldIT Temperature Transmitter, field mounted TH202/TH202-Ex Data Sheet 0/-8.6 EN Level 0: Information FieldIT Temperature Transmitter, field mounted TH0/TH0-Ex HART programmable, Pt 00 (RTD), thermocouples, electrical isolation Input Resistance thermometer (,,

More information

Rosemount 644 Temperature Transmitter

Rosemount 644 Temperature Transmitter Rosemount 644 Rosemount 644 Temperature Transmitter Communicates easily using either 4-20 ma/hart or FOUNDATION fieldbus protocol Meets NAMUR NE 21 recommendation ensuring reliable transmitter performance

More information

The Rosemount 848T Wireless Temperature Transmitter

The Rosemount 848T Wireless Temperature Transmitter Rosemount 88T Family February 0 The Rosemount 88T Wireless Temperature Transmitter The Rosemount 88T is the premier choice for Wireless High Density measurements. Four independently configurable inputs

More information

3 Ex i Isolators. Temperature Transmitter with Output 0/ ma, without Limit Value Contact (Field Circuit Ex i) Type 9182/.0-5.

3 Ex i Isolators. Temperature Transmitter with Output 0/ ma, without Limit Value Contact (Field Circuit Ex i) Type 9182/.0-5. Ex i Isolators Temperature Transmitter with Output 0/4... 20 ma, without Limit Value Contact Field Circuit Ex i) One unit for nearly all temperature sensors indivdually configurable Intrinsically safe

More information

SMART TEMPERATURE TRANSMITTERS. smar

SMART TEMPERATURE TRANSMITTERS. smar SMART TEMPERATURE TRANSMITTERS FEATURES Single unit accepts signal from: - Standart RTDs and Thermocouples - Single ended or differential sensing - mv signals from radiation pyrometers, load cells, etc.

More information

Rosemount 248 Temperature Transmitter

Rosemount 248 Temperature Transmitter Rosemount 248 Rosemount 248 Temperature Transmitter Basic temperature transmitter offers a reliable solution for temperature monitoring points transmitter design provides flexible and reliable performance

More information

Rosemount 644 Temperature Transmitter

Rosemount 644 Temperature Transmitter Rosemount 644 Rosemount 644 Temperature Transmitter Communicates easily using either 4-20 ma/hart or FOUNDATION fieldbus protocol Meets NAMUR NE 21 recommendation ensuring reliable transmitter performance

More information

Temperature Transmitter ZTT series

Temperature Transmitter ZTT series BT.11.13 ZT/I ZTT series The ZTT series transmitter accepts the most commonly used temperature sensors (RTD, T/C) as well as mv and slide wire signals. All the models adopt a 2 wire 4...20mA output signal

More information

Rail mounted Temperature Transmitter TH102/TH102-Ex

Rail mounted Temperature Transmitter TH102/TH102-Ex Data Sheet 10/-8.54 EN Rail mounted Temperature Transmitter TH102/TH102-Ex HART programmable, Pt 100 (RTD), thermocouples, electrical isolation Input Resistance thermometer (2, 3, 4 wire circuit) Thermocouples

More information

Analog Input Module HART Ex i / I.S. Inputs, Channels Type 9461/

Analog Input Module HART Ex i / I.S. Inputs, Channels Type 9461/ > 4 channels for 2-wire HART transmitters and 4 channels for 4-wire HART transmitters > Intrinsically safe inputs Ex ia IIC > Galvanic separation between inputs and system > Open-circuit and short-circuit

More information

IP26 Series Current to Pneumatic Converter

IP26 Series Current to Pneumatic Converter Product Specifications 06.2016 PSS EVE0403 A-(en) IP26 Series Current to Pneumatic Converter The IP26 (current to pressure) transducer converts a 4 20mA electrical current signal to a proportional linear

More information

JUMO dtrans T01 HART / T01T HART / T01 Junior / T01 Ex / T01 HART Ex Programmable 2-wire transmitter

JUMO dtrans T01 HART / T01T HART / T01 Junior / T01 Ex / T01 HART Ex Programmable 2-wire transmitter JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: 49 661 60030 Fax: 49 661 6003607 Email: mail@jumo.net Internet: www.jumo.net JUMO

More information

Temperature Input Module for Zone 1 Series 9482/32

Temperature Input Module for Zone 1 Series 9482/32 www.stahl.de > 8 channels for temperature sensors > Intrinsically safe inputs Ex ia > For Pt-, Ni- and Cu-resistance temperature detectors according to DIN, IEC and GOST in 2-, 3- and 4-wire circuits >

More information

Product Guide 2008 / 2009

Product Guide 2008 / 2009 Product Guide 008 / 009 for the Process Industry Displays Trip Amplifiers / AC Power Supplies Temperature Transmitters Frequency / Pulse Modules Signal & Signal Conversion I.S. Modules: Analog, Temperature

More information

Analog Universal Module HART for Zone 2 Series 9468/33

Analog Universal Module HART for Zone 2 Series 9468/33 > 8 channels can be adjusted individually as analog inputs or outputs > Intrinsically safe inputs/outputs Ex ia > For 0/4 20 ma + HART signals > Line fault monitoring per channel > Diagnostics based on

More information

FieldIT Temperature Transmitter, head mounted TH02/TH02-Ex

FieldIT Temperature Transmitter, head mounted TH02/TH02-Ex Data Sheet 0/-8.9 EN Level 0: Information FieldIT Temperature Transmitter, head mounted TH0/TH0-Ex HART programmable, Pt 00 (RTD), thermocouples, electrical isolation Input Resistance thermometer (,, wire

More information

Rosemount 248 Temperature Transmitter

Rosemount 248 Temperature Transmitter Product Data Sheet Rosemount 248 Rosemount 248 Temperature Transmitter Ready-to-install out of the box Unsurpassed performance for temperature monitoring points Industry standard DIN Form B headmount transmitter

More information

Temperature Transmitter itemp RTD DIN rail TMT 127

Temperature Transmitter itemp RTD DIN rail TMT 127 Technical Information TI 095R/09/en No. 51004790 Temperature Transmitter itemp RTD DIN rail TMT 127 Temperature Transmitter for Pt100 Resistance Thermometer Application Temperature transmitter with fixed

More information

SafetyNet IO Modules. Safety and Distributed Control. PAC8000 SafetyNet.

SafetyNet IO Modules. Safety and Distributed Control. PAC8000 SafetyNet. SafetyNet IO Modules SafetyNet IO Modules interface to safety system field wiring via Field Terminals. The IO Modules and the Field Terminals mount on Carriers that provide mechanical support, but also

More information

â Ó itemp TC TMT128 Technical information DIN rail mounted Temperature Transmitter for Thermocouples (TC)

â Ó itemp TC TMT128 Technical information DIN rail mounted Temperature Transmitter for Thermocouples (TC) Technical information itemp TC TMT128 DIN rail mounted Temperature Transmitter for Thermocouples (TC) Application Temperature transmitter with fixed measuring ranges for converting TC input signals into

More information

Product manual wire HART 7 temperature transmitter

Product manual wire HART 7 temperature transmitter Product manual 7 2-wire HART 7 temperature transmitter PERFORMANCE MADE SMARTER PENDING PENDING PENDING TEMPERATURE I.S. INTERFACES COMMUNICATION INTERFACES MULTIFUNCTIONAL ISOLATION DISPLAY No. 7V101-UK

More information

D1072. SIL 2 Temperature Signal Converter, Duplicator, Adder/Subtractor DIN-Rail Models D1072S, D1072D. Front Panel and Features:

D1072. SIL 2 Temperature Signal Converter, Duplicator, Adder/Subtractor DIN-Rail Models D1072S, D1072D. Front Panel and Features: Characteristics: Front Panel and Features: Ordering Information: Model: D7 D7 General Description: The single and dual channel DIN Rail Temperature Signal Converter D7S and D7D accepts a low level dc signal

More information

Intrinsic Safety Control Drawing

Intrinsic Safety Control Drawing s Intrinsic Safety Control Drawing A5E00455287 system in total "No revision to drawing without prior Approval by FM Approvals!" PLC PC Non hazardous area PROFIBUS DP RS 485-IS Coupler PROFIBUS RS 485-IS

More information

General Specifications

General Specifications General Specifications YTA60 Temperature Transmitter The YTA60 is the highly accurate temperature transmitter that accepts Thermocouple, RTD, ohms or DC millivolts inputs and converts it to a to 0 ma DC

More information

JUMO dtrans T01 HART / T01T HART / T01 Junior / T01 Ex / T01 HART Ex Programmable 2-wire transmitter

JUMO dtrans T01 HART / T01T HART / T01 Junior / T01 Ex / T01 HART Ex Programmable 2-wire transmitter JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: 49 661 60030 Fax: 49 661 6003607 Email: mail@jumo.net Internet: www.jumo.net JUMO

More information

Assembly. Front view. Power Rail

Assembly. Front view. Power Rail Thermometer Resistance Repeater Features Assembly 1-channel isolated barrier 24 V DC supply (Power Rail) RTD/resistance input Resistance output Accuracy 0.1 % Front view Removable terminals blue Function

More information

600T Series Transmitters Model 653L Electronic temperature transmitter (PC programmable for RTD and resistance) Specification Sheet

600T Series Transmitters Model 653L Electronic temperature transmitter (PC programmable for RTD and resistance) Specification Sheet Specification Sheet 600T Series Transmitters Model 65L Electronic temperature transmitter (PC programmable for RTD and resistance) High flexibility and wide rangeability Primary element and calibration

More information

AT200 Magnetostrictive Level Transmitter. External mounted magnetostrictive level transmitter K-TEK Products

AT200 Magnetostrictive Level Transmitter. External mounted magnetostrictive level transmitter K-TEK Products Data sheet DS/-EN Rev. T Magnetostrictive Level Transmitter External mounted magnetostrictive level transmitter K-TEK Products Features SIL2 Certified IEC 61508* Designed to mount externally to K-TEK KM26

More information

General Specifications

General Specifications General Specifications GS 01F06F01-01EN Model DY Vortex Flowmeter Model DYA Vortex Flow Converter FOUNDATION Fieldbus Communication Type General FOUNDATION Fieldbus is the digital communication line for

More information

Temperature transmitter itemp RTD DIN rail TMT 127

Temperature transmitter itemp RTD DIN rail TMT 127 Technical information TI 095R/24/ae Nr. 510 06165 Temperature transmitter itemp RTD DIN rail TMT 127 Pt100 transmitter for an economical, high accuracy temperature monitoring. Fixed range measurement,

More information

2002 IS Catalog. Page

2002 IS Catalog. Page Page Introduction... 95 Current Repeaters/Drivers (Single-channel) KFD0-CS-Ex1.50P (Transmitter, positioner and indicator)... 96 KFD0-CS-Ex1.51P (Positioner and fire detector)... 97 KFD0-CS-Ex1.52 (Current

More information

TFZ Programmable FOUNDATION Fieldbus Temperature Transmitter

TFZ Programmable FOUNDATION Fieldbus Temperature Transmitter June 2013 Description The Programmable FOUNDATION Fieldbus saves wire and installation costs by allowing up to 32 field devices to be networked onto one, low cost FOUNDATION fieldbus H1 segment. The loop-powered

More information