More Precision. wiresensor // Draw-wire displacement sensors

Transcription

1 More Precision wiresensor // Draw-wire displacement sensors

2 38 Industrial draw-wire sensors wiresensor P5 analog - Robust aluminum profile housing - Customized versions for OEM - Potentiometer, current and voltage output Model P5 (Measuring range 3000/4000/5000mm) Output U/I Output P 50 MR (mm) (mm) / ,6 7,6 36 2x set screw M4 4x M6 27,5 ø Model P5 (Measuring range 7500/0000/5000mm) x slot nuts 2x set screw M4 MR (mm) (mm) (mm)

3 39 Model WDS P5 WDS P5 WDS P5 WDS P5 WDS P5 WDS P5 Measuring range 3000mm 4000mm 5000mm 7500mm 0000mm 5000mm Output Linearity Resolution Sensor element P, U, I ±0.% FSO ±3mm ±0.5% FSO - ±6mm ±7.5mm ±.3mm ±5mm ±22.5mm towards infinity hybrid potentiometer Temperature range -20 C C Material Sensor mounting Wire mounting Wire acceleration housing aluminum draw-wire coated polyamide stainless steel (ø 0.45mm) coated polyamide stainless steel (ø.0mm) slot nut wire clip approx. 6g Wire retraction force (min) 4.5N 4N 4N 8N 8N 8N Wire extension force (max) 8N 8.5N 9N 24N 2N 25N Protection class Vibration Mechanical shock Electrical connection IP65 (only if connected) 20g, 20Hz - 2kHz 50g, 20ms P integrated cable, axial, m U, I flange connector, radial, 8-pin, DIN45326 Weight approx..kg 2.2kg 3.2kg 3.5kg FSO = Full Scale Output Specifications for analog outputs on page 5. rticle description WDS P5 - C - P P: potentiometer connection C: P5-3000/4000/5000 connection S: P5-7500/0000/5000 U: voltage connection SR: P5-3000/4000/5000 connection S: P5-7500/0000/5000 I: current connection SR: P5-3000/4000/5000 connection S: P5-7500/0000/5000 Connection: SR: radial plug S: axial plug C: integrated cable, axial, m Model P5 Measuring range in mm

4 40 Industrial draw-wire sensors wiresensor P5 digital - Robust aluminum profile housing - Customized versions for OEM - Incremental / absolute encoder Model P5 50 ø30 ø20.2 2x slot nuts 2x set screw M4 4x M6 36 Output HTL/TTL 4 Output SSI Output CO/P 4 4 Ø58 Ø58 Ø58 5 approx MR (mm) (mm) (mm)

5 4 Model WDS-5000-P5 WDS-7500-P5 WDS-0000-P5 WDS-5000-P5 Measuring range 5000mm 7500mm 0000mm 5000mm Output Linearity HTL, TTL, SSI, P, CO ±0.0% FSO - - ±mm ±.5mm ±0.02% FSO ±mm ±.5mm - - Resolution Sensor element HTL, TTL SSI, P, CO 0.05mm (9.52 pulses/mm) 0.038mm incremental/absolute encoder Temperature range -20 C C Material Sensor mounting Wire mounting housing draw-wire aluminum coated polyamide stainless steel (ø.0mm) slot nuts eyelet Wire acceleration 5g 6g 3g 3g Wire retraction force (min) 4N 8N 8N 8N Wire extension force (max) 6N 24N 2N 25N Protection class Vibration Mechanical shock IP65 (only if connected) 20g, 20Hz - 2kHz 50g, 0ms Electrical connection HTL, TTL SSI P, CO integrated cable, radial, m flange connector, radial,2-pin bus cover Weight approx. 2kg approx. 2.5kg approx. 3.5kg approx. 4.5kg FSO = Full Scale Output Specifications for digital outputs on page 52. rticle description WDS P5 - CR - TTL Output option: HTL TTL CO: CNopen P: Profibus DP SSI Connection: SR (Output SSI): radial plug CR (Output HTL, TTL): integrated cable, radial, m H (Output CO, P): bus cover Model P5 Measuring range in mm

6 50 ccessories and mounting wiresensor ccessories: pplication example with accessories WE-xxxx-M4 Wire extension with M4-wire connection, x=length WE-xxxx-Clip Wire extension with eyelet, x=length TR-WDS Pulley wheel, adjustable TR3-WDS Pulley wheel, fixed GK-WDS MH-WDS MH2-WDS MT--WDS ttachment head for M4 Magnetic holder for wire mounting Magnetic holder for sensor mounting Mounting clamp for WDS-P MT--WDS mounting clips MH-WDS magnetic holder measuring range FC8 Female connector for WDS, 8-pin FC8/90 Female connector 90 for WDS PC 3/8-WDS Sensor cable, length 3m PS 2020 (Power Supply 24 V / 2,5, Input VC, output 24 VDC / 2.5, for snap in mounting on DIN rail) WE-x-Clip wire extension WDS-MP Mounting plate for P sensors TR3-WDS pulley wheel, fix TR-WDS pulley wheel, adjustable, x Ø4.5 2x Ø5.3 Installation information: Wire attachment: The free return of the measurement wire is not permissible and it is essential that this is avoided during installation. Wire exit angle: When mounting a draw-wire displacement sensor, a straight wire exit (±3 tolerance) must be taken into account. If this tolerance is exceeded, increased material wear on the wire and at the wire aperture must be expected. Mounting plate WDS-MP wire aperture 0 (±3 tolerance)

7 Output specifications analog 5 Output Plug M6 -S / -SR Integrated cable -C / -CR Open contacts Potentiometric output (P) Supply voltage max. 32VDC at kohm / Wmax Resistance Temperature coefficient kohm ±0% (potentiometer) ±0.0025% FSO/ C sensor side = input + 2 = grounding 3 = signal white = input + brown = grounding green = signal = input + 2 = signal 3 = grounding CCW 3 CW CLOCKWISE 2 WIPER Voltage output (U) Supply voltage Current consumption Output voltage Load impedance Signal noise Temperature coefficient Electromagnetic compatibility (EMC) VDC (non stabilized) max. 30m VDC Option / ±5V >5kOhm 0.5mV eff ±0.005% FSO/ C EN EN sensor side djustment ranges (if supported by the model) Zero ±20% FSO Sensitivity ±20% = supply 2 = grounding 3 = signal 4 = ground white = supply brown = grounding green = signal yellow = ground Current Output (I) Supply voltage Current consumption Output current Load Signal noise Temperature coefficient Electromagnetic compatibility (EMC) VDC (non stabilized) max. 35m m <0Ohm <,6 µ eff ±0.0% FSO/ C EN EN sensor side djustment range (if supported by the model) Zero ±8% FSO = supply Sensitivity ±5% 2 = grounding white = supply brown = grounding

8 52 Output specifications SSI wiresensor Contact description U Encoder power supply connection Encoder ground connection. 2 GND The voltage drawn to GND is U. Positive SSI pulse input. Pulse + forms a current loop with 3 Pulses + pulse -. current of approx. 7 m in direction of pulse + input generates a logical in positive logic. Positive, serial data output of the differential line 4 Data + driver. High level at the output corresponds to logical in positive logic. 5 ZERO 6 Data - 7 Pulses - 8 / 0 DTVLID DTVLID MT 9 UP/DOWN / 2 Not in use Zero setting input for setting a zero point at any desired point within the entire resolution. The zeroing process is triggered by a High pulse (pulse duration 00 ms) and must take place after the rotating direction selection (UP/ DOWN). For maximum interference immunity, the input must be connected to GND after zeroing. Negative, serial data output of the differential line driver. High level at the output corresponds to logical 0 in positive logic. Negative SSI pulse input. Pulse - forms a current loop with pulse +. current of approx. 7 m in direction of pulse - input generates a logical 0 in positive logic. Diagnosis outputs DV and DV MT Jumps in data word, e.g. due to defective LED or photoreceiver, are displayed via the DV output. In addition, the power supply of the multiturn sensor unit is monitored and the DV MT output is set when a specified voltage level is dropped below. oth outputs are Low-active, i.e. are switched through to GND in the case of an error. UP/DOWN counting direction input. When not connected, this input is on High. UP/ DOWN-High means increasing output data with a clockwise shaft rotating direction when looking at the flange. UP/ DOWN-Low means increasing values with a counter-clockwise shaft rotating direction when looking at the flange. Pin assignment Pin Cable color ssignment brown U 2 black GND 3 blue Pulses + 4 beige Data + 5 green ZERO 6 yellow Data - 7 violet Pulses - 8 brown/yellow DTVLID 9 pink UP/ DOWN 0 black/yellow DTVLID MT Inputs Please use leads twisted in pairs for extension cables. Control signals UP/DOWN and Zero Level High Level Low Connection: > 0.7 U < 0.3 U UP/DOWN input with 0kohms to U, zeroing input with 0kohms to GND. SSI pulse Optocoupler inputs for electrical isolation Outputs SSI data RS485 driver Diagnostic outputs Push-pull outputs are short-circuit-proof Level High > U -3.5V (with I = -20m) Level Low 0.5V (with I = 20m)

9 Output specifications CNopen 53 CNopen features Setting CNopen baud rate us protocol CNopen Device profile CNopen - Ci DSP 406, V 3.0 aud rate Setting Dip Switch 2 3 CNopen Features Device Class 2, CN 2.0 0kit/s OFF OFF OFF Operating modes (with SDO progr.) Polling Mode (asynch, via SDO) Cyclic Mode (asynch-cyclic) The encoder cyclically sends the current process actual value without a request by a master. The cycle time can be parameterized for values between and ms. Synch Mode (synch-cyclic) The encoder sends the current actual process value after receiving a synch telegram sent by a master. The synch counter in the encoder can be parameterized so that the position value is not sent until after a defined number of synch telegrams. cyclic Mode (synch-acyclic) 20kit/s OFF OFF ON 50kit/s OFF ON OFF 25kit/s OFF ON ON 250kit/s ON OFF OFF 500kit/s ON OFF ON 800kit/s ON ON OFF Mit/s ON ON ON Preset value Rotating direction Scaling With the Preset parameter the encoder can be set to a desired actual process value that corresponds to the defined axis position of the system. The offset value between the encoder zero point and the mechanical zero point of the system is saved in the encoder. With the operating parameter the rotating direction in which the output code is to increase or decrease can be parameterized. Scaling The steps per revolution and the total revolution can be parameterized. The steps per revolution and the total revolution can be parameterized. Contact description CNopen CN_L CN us Signal (dominant Low) CN_H CN us Signal (dominant High) U Supply voltage VDC GND Ground contact for U (Terminals with the same designation are internally interconnected) Diagnose The encoder supports the following error messages: - Position and parameter error - Lithium cell voltage at lower limit (Multiturn) Default setting 50kbit/s, node number Settings of user address for CNopen ddress can be set with rotary switch. Example: User address 23 ON CN_L CN_H U GND CN_L CN_H U GND ON 2 3 Setting of terminating Resistor for CNopen ON ON = Last user OFF = User X

10 54 Output specifications Profibus wiresensor Profibus-DP features us protocol Profibus-DP Profibus features Device Class and 2 2 ON Data exch. functions Input: Position value dditional parameterized speed signal (readout of the current rotary speed) Output: Preset value Preset value Parameter functions With the Preset parameter the encoder can be set to a desired actual value that corresponds to the defined axis position of the system. Rotating direction: With the operating parameter the rotating direction for which the output code is to increase or decrease can be parameterized. U GND U GND Settings of terminating resistors for Profibus-DP ON Diagnose Default setting User address 00 The encoder supports the following error messages: - Position error - Lithium cell voltage at lower limit (Multiturn) 2 ON = last user OFF = user X Settings of user address for Profibus-DP Settings of user address for Profibus-DP Contact description Profibus-DP Negative serial data line Positive serial data line U Supply voltage VDC GND Ground contact for U (Terminals with the same designation are internally interconnected)

11 Output specifications Incremental encoder 55 Signal output 0 0 Pin assignment TTL, HTL Pin Cable color ssignment Pin pink inv. Pin 2 blue U Sense Pin 3 red N (zero impulse) Pin 4 black N inv. (zero impulse inv.) Pin 5 brown Pin 6 green inv. Pin Pin 8 gray Pin Pin 0 white/green GND Pin white GND Sense Pin 2 brown/green U Output TTL Linedriver (5 VDC) Level High 2.5V (with I = -20m) Pegel Low 0.5V (with I = 20m) Pin 2 and Pin 2 are internally connected as well as Pin and 0. For cable length >0m twisted pair wires are required. Load High 20m Output,,,, 0 Output TTL0/TTL02 NPN (5 VDC ±5%) Level High > 4.5V Level Low <.0V Load High 3m Output (TTL0),, 0 Output (TTL02),,,, 0 Output HTL Push-pull ( VDC) Level High U -3V (with I = -20m) Level Low.5V (with I = 20m) Load High 40m Output,,,, 0 Output E Push-pull ((5 VDC) Level High U -2.5V Level Low 0.5V Load High 50m Output,, 0 Connection assignment E, E830 Cable color ssignment white 0V brown +U green - yellow - gray 0 Connection assignment TTL0 Cable color ssignment brown 0V gray +U white green yellow 0 Output E830 Push-pull (( VDC) Level High U -3V Level Low 2.5V Load High 50m Output,, 0 Connection assignment TTL02 Cable color ssignment red +U black 0V brown black orange black yellow 0 black n.c.

12 High performance sensors made by Micro-Epsilon Sensors and systems for displacement and position Sensors and measurement devices for non-contact temperature measurement 2D/3D profile sensors (laser scanner) Optical micrometers, fiber optic sensors and fiber optics Color recognition sensors, LED analysers and color inline spectrometer Measurement and inspection systems MICRO-EPSILON Headquarters Koenigbacher Str Ortenburg / Germany Tel. +49 (0) 8542 / 68-0 Fax +49 (0) 8542 / info@micro-epsilon.com