Absolute encoders - analog Blind hollow shaft ø12 mm Magnetic single- or multiturn encoders 12 bit ST / 16 bit MT
|
|
- Gavin Montgomery
- 5 years ago
- Views:
Transcription
1 Blind hollow shaft ø mm Magnetic single- or multiturn encoders bit ST / bit MT BMSH 8, BMMH 8 analog - MAGRES Features Encoder single- or multiturn / analog Magnetic sensing Resolution: singleturn bit, multiturn bit High resistance to shock and vibrations Teach inputs Redundant version BMMH 8 analog with blind hollow shaft Technical data - electrical ratings Voltage supply Reverse polarity protection Yes Short-circuit proof VDC Yes Consumption w/o load typ. ma ( VDC) Initializing time Response time 00 ms after power on < ms Interface analog V / 0... V /...0 ma Resolution: bit Steps per turn 09 / bit Linearity ±0.0 % of measuring range (0 revolutions) ±0.7 % of measuring range ( revolutions) ±0. % of measuring range (0 ) ±0. % of measuring range (90 ) Absolute accuracy ± Sensing method Magnetic Repeatability 0. (Sensorsystem) Code sequence CW: ascending values with clockwise sense of rotation; looking at flange Interference immunity DIN EN Emitted interference DIN EN Programmable parameters Diagnostic functions BMMH 8 Function Number of turns Factory setting Measuring range teachable, min. 0 Self-diagnosis Reading back voltage output Multiturn / bit 0 revolutions Technical data - electrical ratings BMSH 8 Function Factory setting Singleturn revolution Technical data - mechanical design Size (flange) ø8 mm Shaft type ø mm (blind hollow shaft) Protection DIN EN 09 IP, IP Operating speed 000 rpm Operating torque typ Nm Materials Housing: aluminium Flange: aluminium Operating temperature C Relative humidity 9 % Resistance DIN EN Vibration 0 g, Hz DIN EN Shock 00 g, ms Weight approx. 00 g M, -pin M, 8-pin Cable m /0/0
2 Blind hollow shaft ø mm Magnetic single- or multiturn encoders bit ST / bit MT BMSH 8, BMMH 8 analog - MAGRES Part number Multiturn BMMH 8SN / Singleturn BMSH 8SN /00 Cable m, radial M x connector M, pin, radial (redundant N M, -pin, radial (not redundant Q M, 8-pin, radial Blind hollow shaft B ø mm, IP, with P ø mm, IP, with Resolution / / bit single-/multiturn Cable m, radial M x connector M, pin, radial (redundant N M, -pin, radial (not redundant Q M, 8-pin, radial Blind hollow shaft B ø mm, IP, with P ø mm, IP, with Resolution /00 bit singleturn Accessories U V 0... V V...0 ma W...0 ma and V (not redundant) V redundant Y V redundant Z...0 ma redundant s and cables 098 Female connector M, -pin, straight 0 Female connector M, -pin, straight, shielded, m 08 Cable with male/female M, -pin, angled, A-coded, m 099 Cable with male/female M, -pin, shielded, straight, A-coded, m Mounting accessories 0 Set of spring coupling for encoders ø8 mm 00 Clamp set ø mm 0070 Torque pin 0090 Torque spring washer U V 0... V V...0 ma W...0 ma and V (not redundant) V redundant Y V redundant Z...0 ma redundant /0/0
3 Blind hollow shaft ø mm Magnetic single- or multiturn encoders bit ST / bit MT BMSH 8, BMMH 8 analog - MAGRES Terminal significance +Vs Encoder supply voltage. (Redundant configuration provides decoupled dual voltage supply (+Vs/+Vs) separated by diodes. 0 V Encoder ground connection relating to +Vs. Iout Current output. Load: <00 Ω Uout Voltage output. Current output: max. 0 ma Load resistor: > kω between Uout / 0 V Set Teach input. Resting state: Low Level High: >0.7 x +Vs Level Low: >0. x +Vs Pull-Down resistor: 0 kω DV/Status Diagnostic output/teach output. R L - Vs: High: >(+Vs -.0 V) Low: <.0 V R L - GND: High: >(+Vs -.0 V) Low: <.0 V I Lmax = 0 ma Upon any short-time disturbance, DV will go on LOW for second. Drain Housing. Teach process The teaching functionality will be disabled minutes after encoder power. Time begins to start anew after each teaching operation.. Set input on HIGH for seconds. DV/ status output reflects the reverted input and will start oscillating after seconds. Now set input on LOW.. Get encoder in position intended for voltage output / current.. Set input on HIGH for second. DV/ status output will switch to LOW for seconds and then start oscillating.. Get encoder in position intended for voltage output / current.. Set input on HIGH for one second. DV/Status output will switch to HIGH for seconds and then shortly oscillate to signal that the teaching operation has been completed. In the event of one out of both taught limits being beyond the sensing range or too close to each other, the DV/status output will oscillate shortly. There is no teaching of sensing range. The operation must be repeated under consideration of minimum teaching limit and sensing range. Set / restore default Set input on HIGH for seconds. (After seconds, the DV/status output will start oscillating while restoring default in second ). Note: Current position will be the new zero point. Behavior Singleturn U/I 0 Behavior Multiturn U/I 80 Teach in ccw direction Teach in cw direction 0 revolutions /0/0
4 Blind hollow shaft ø mm Magnetic single- or multiturn encoders bit ST / bit MT BMSH 8, BMMH 8 analog - MAGRES Terminal assignment Cable for connection reference - Core color U/ V W white 0 V 0 V 0 V brown +Vs +Vs +Vs green d.u. Iout Iout yellow Uout d.u. Uout grey Set Set Set pink DV/Status DV/Status DV/Status Screen connected to housing Cable data x 0. mm Cable redundant for connection reference - Core color Y/7 Z white 0 V 0 V brown +Vs +Vs green Uout Iout yellow Uout Iout grey Set Set pink DV/Status DV/Status blue Set Set red DV/Status DV/Status black 0 V 0 V violet +Vs +Vs Screen connected to housing Cable data 0 x 0. mm M, -pin for connection reference -N U/ V W Pin 0 V 0 V 0 V Pin +Vs +Vs +Vs Pin d.u. Iout Iout Pin Uout d.u. Uout Pin Set Set Set M, redundant, x -pin for connection reference -M Pin 0 V 0 V Pin +Vs +Vs Pin Uout (Y/7) Uout (Y/7) Iout (Z) Iout (Z) Pin DV/Status DV/Status Pin Set Set M, 8-pin for connection reference -Q U/ V W Pin 0 V 0 V 0 V Pin +Vs +Vs +Vs Pin d.u. Iout Iout Pin Uout d.u. Uout Pin Set Set Set Pin DV/Status DV/Status DV/Status Pin 7 n.c. n.c. n.c. Pin 8 n.c. n.c. n.c. 7 8 M, redundant, 8-pin for connection reference -Q Y/7 Z Pin 0 V 0 V Pin +Vs +Vs Pin Uout Iout Pin Uout Iout Pin Set Set Pin DV/Status DV/Status Pin 7 Set Set Pin 8 DV/Status DV/Status 7 8 /0/0
5 Blind hollow shaft ø mm Magnetic single- or multiturn encoders bit ST / bit MT BMSH 8, BMMH 8 analog - MAGRES Dimensions BMSH 8/BMMH 8 analog cable radial ø * R= ±, / Ø mm M x x 0 0 * BMSH 8/BMMH 8 analog connector xm radial ø ø H7 x *R= ±, / ø mm M x x 0 * 0 ø H7 x, h0,, 0 0-0,0 8 h0 BMSH 8/BMMH 8 analog connector M radial /0/0
Cable transducer Analog output / redundant Measuring length absolute up to 5 m
Features Magnetic sensing method Resolution: 12 bit Interface analog 0...10 V / 0.. V /...20 ma Measuring length up to m Removable stickers for water outlet Teach inputs Extremely light thanks to housing
More informationAbsolute encoders - SSI
with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics
More informationAbsolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
More informationAbsolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT
Features High resolution encoder multiturn / SSI Optical sensing method Resolution: singleturn 18 bit, multiturn 12 bit Electronic setting of zero point Counting direction input Available with additional
More informationIncremental encoders Blind or through hollow shaft ø12 mm pulses per revolution
Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting
More informationAbsolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
More informationAbsolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Suitable for high positive,
More informationIncremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,
More informationMagnetic absolute multi-turn hollow shaft encoder BMMH MAGRES SSI
Magnetic absolute multi-turn hollow shaft encoder BMMH MAGRES SSI features robust multi-turn encoder up to - 2 bit single-turn resolution - 3 bit multi-turn resolution miniature housing zero point programmable
More informationTechnical data. General specifications. Measurement range min max. 360
Model Number Features Very small housing High climatic resistance 12 Bit singleturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
More informationMagnetic absolute single-turn encoder BMSH MAGRES parallel
Magnetic absolute single-turn encoder BMSH MAGRES parallel features robust single-turn encoder up to 9 bit parallel interface miniature housing zero-point programmable general data voltage supply 5 VDC
More informationIncremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable
More informationPositioning drives DC motor, brushless Absolute multiturn position detection, Profibus-DP
Features Positioning drive with worm gear bevel geared shaft Profibus-DP Brushless DC motor Absolute multiturn position detection Nominal power output 80 W inputs programmable Separate communication and
More informationAbsolute encoders - SSI EX approval ATEX EEx d IIC T6 Optical single and multiturn encoders 14 bit ST / 12 bit MT
Features Encoder single- or multiturn / SSI / ATEX Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping flange with shaft ø10 mm Explosion protection per EEx d IIC T6 Area of application:
More informationIncremental Encoder Model: FOI58
Incremental Encoder Model: FI58 Document no. FI 188 BE Date: 1.01.201 Robust mechanical construction, high vibration and shock resistance 1 to 16,8 pulses/ revolution perating temperature - 0 C to + 85
More informationEncoder - Absolut 2RMHF-SSI
Absolute Encoder: Ø24 mm Hollow Shaft: Ø3 mm to ¼ Inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction IP-Rating: IP64 or IP67 Mechanical
More informationAbsolute Encoders Multiturn
The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just
More informationTechnical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B
Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are
More informationIncremental hollow shaft encoder BRIH EcoMag
Incremental hollow shaft encoder BRIH EcoMag features miniaturized hollow shaft encoder with wide pulse range radial cable connection or connector end shaft mounting up to mm general data voltage supply
More informationAbsolute multi-turn hollow shaft encoder BOMH Dignalizer SSI
features high resolution multi-turn encoder up to - 8 bit single-turn - 8 bit multi-turn interface programmable permanent self-test reference point programmable general data voltage supply 5 VDC (05C)
More informationAbsolute Encoders Multiturn
Absolute Encoders Multiturn Functional Safety, optical The absolute multiturn encoders Sendix 5863 SIL and 5883 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10
Model Number SYNCHRON SERIELLES INTERFACE Features Recessed hollow shaft SSI interface Up to Bit multiturn Free of wear magnetic sampling High resolution and accuracy Additionally push buttons for preset
More informationMultiturn absolute encoder
SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Data transfer up to 2 MBaud Optically isolated RS 422 interface Recessed
More informationABSOLUTE MAGNETIC ROTARY ENCODER ANALOG
High-resolution absolute encoder based on magnetic technology. Singleturn sensing based on 360 Hall effect technology. Multiturn sensing based on magnetic pulse counter. No batteries used. Main Features
More informationMHAD 50 - HDmag. Features
Magnetic sensing, hollow shaft 30 mm MHAD 50 with cable Features Absolute encoder with magnetic sensing and without bearings Absolute resolution max. 16 bit singleturn Additional incremental signals Robust
More informationTechnical data. General specifications V DC Power consumption P 0. 1 W Time delay before availability t v
Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are
More informationElectrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85
Parallel Singleturn bsolute Value Encoder Features 13-bit Singleturn High code change frequency Inputs for: - Selection of counting direction - Buffer memory (LTCH) - Multiplex operation (TRISTTE) Short-circuit
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10
Model Number SYNCHRON SERIELLES INTERFACE Features Solid shaft SSI interface Up to Bit multiturn Free of wear magnetic sampling High resolution and accuracy Additionally push buttons for preset function
More informationENCODER. Analog Multiturn Encoder. Serie 8.M5861. Key-Features:
ENCODER Multiturn Encoder Serie 8.M5861 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connection... Dimensions...5 - Shaft with max. 10 mm diameter - 0...10 V,...20 ma, 0...5 V analog
More informationIncremental Shaft Encoders Industrial types
Synchro flange! Universal industry standard encoder! Up to 40,000 steps with 10,000 pulses! High signal accuracy! Protection class up to IP 67! Operating temperature up to 100 C (RI 58-T)! Flexible due
More informationAbsolute Encoders - Singleturn
The Sendix 5853 and Sendix 5873 singleturn encoders with SSI or BiSS interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional
More informationIncremental Encoder for special applications
Model Number Features Up to 50,000 ppr Extended temperature range Industrial standard housing Ø58 mm Servo or clamping flange 10 V... 30 V with short-circuit proof push-pull output Description High performance
More informationTechnical data. Functional safety related parameters MTTF d Mission Time (T M ) max. 140 ma Power consumption P 0. Voltage drop
Release date: 2014-04-14 15: Date of issue: 2016-05-0 t102_eng.xml Model Number Features Industrial standard housing Ø58 mm 1 Bit singleturn Output code: gray and binary Short-circuit proof push-pull output
More informationRotary Measurement Technology Absolute Encoders, Multiturn
Mechanical drive Safety-LockTM High rotational speed -40 to 90 C IP Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationIncremental Shaft Encoders Industrial types
Synchro flange Universal industry standard encoder Up to 40 000 steps with 10 000 pulses High signal accuracy Protection class up to IP67 Operating temperature up to 100 C (RI 58-T) Flexible due to many
More informationENCODER. Analog Multiturn Encoder. Serie 8.M3661/M3681. Key-Features:
ENCODER Multiturn Encoder Serie 8.M366/M368 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connections...5 Dimensions...6 - Shaft with max. 0 mm diameter - 0...5/0V, 4...20 ma analog
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 analog
NOVOHALL Rotary Sensor non-contacting Series RSC2800 analog The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional Hall sensors,
More informationAbsolute Encoders Singleturn
The absolute singleturn encoders Sendix 5853 SIL and 5873 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN EN ISO 6800-5- or PLe to DIN EN ISO 3849. The extra
More informationMultiturn absolute encoder
SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Release date: 2016-07-12 16:14 Date of issue: 2016-07-12 t4917_eng.xml Model Number Features Industrial standard housing Ø58 mm 0 Bit multiturn Data
More informationAbsolute encoders multiturn
The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. With a size of just 6 x 5 mm it offers a blind hollow shaft of
More informationAcceleration sensors With relay output for limit monitoring Analog / CANopen
Features Acceleration sensor / analog / CANopen Up to two relay outputs for limit monitoring 3 axes detection, MEMS based Measuring range ±2 g Connection: connector M12, 12-pin Offshore capability (plastic
More informationExpress Delivery. Axial. Connection
HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN
More informationAbsolute Encoders - Singleturn
The Sendix 5 and Sendix 7 singleturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional SinCos
More informationOutputs Voltage: V; V
PRAS3 Magnetic Angle Sensor with Analog Output Magnetic angle sensor 0-360 degrees in a 36 mm dia. housing With 10 mm shaft or 6 mm hollow shaft Protection class IP67/IP69K Magnetic measurement principle
More informationNOVOTURN Multiturn Sensor non-contacting. Series RSM-2800
NOVOTURN Multiturn Sensor non-contacting Series RSM-2800 Special features Non-contacting, magnetic Long life Electrical range 720 up to 5760 in 360 -steps available (2 to 16 turns) True-Power-On System:
More informationProtection class IP67/IP69K Magnetic measurement principle
POSITILT PTAS2 Magnetic inclination sensor with analog output Magnetic inclination sensor in a 36 mm housing Protection class IP67/IP69K Magnetic measurement principle Outputs: Voltage 0.5... 4.5 V; 0.5...
More informationABSOLUTE ROTARY ENCODER DEVICE NET
Main Features - Compact and heavy-duty industrial model - Certified: By ODVA - Interface: Device Net - Housing: 58 mm - Full or hollow shaft: 6 or 0 mm / 5 mm - Max. 6556 steps per revolution (6 Bit) -
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI
Compact design: 50 mm length for single or multiturn Aids for start up and operation: diagnostic LED, preset key with optical response, status information Use of sine/ cosine signals for fast control task
More informationIXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.
IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration
More informationOnline data sheet. ACM60B-S1KE13x06 ACM60 ABSOLUTE ENCODERS
Online data sheet ACM60B-S1KE1x06 ACM60 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Number of steps per revolution Number of revolutions Ordering information
More informationIncremental encoders Blind hollow shaft or cone shaft pulses per revolution
Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80
More informationMagnetic absolute encoder GEL 2035 Serial interface (SSI), 24 Bit
Magnetic absolute encoder GEL 2035 Serial interface (SSI), 24 Bit Technical information Version 03.09 Resolution: Precision: 0.8 Signal pattern: Singleturn (ST): Multiturn (MT): up to 24 Bit SSI and SSI
More informationTechnical data. General specifications V DC No-load supply current I 0. typ. 50 ma Power consumption P 0
Model Number SYNCHRON SERIELLES INTERFACE Cable pull rotary encoder with SSI interface Features Solid yet lightweight plastic construction Compact, slim design (the shaft of the mounted rotary encoder
More informationProtection class IP67/IP69K Magnetic measurement principle
POSITILT PTAS2 Magnetic inclination sensor with analog output Magnetic inclination sensor in a 36 mm housing Protection class IP67/IP69K Magnetic measurement principle Outputs: Voltage 0.5... 4.5 V; 0.5...
More informationFVS58 singleturn absolute encoder. FVS58. Technical Product description data Incremental encoders special designs. Technical data
absolute encoder Industrial standard housing Ø58 mm 1 Bit singleturn Output code: Gray and binary Short-circuit proof push-pull output Inputs for selection of counting direction, LATCH and PRESET Code
More informationIncremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution
Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional
More informationMaterial: Weight: Shaft Loads:
Absolute Encoder Type SCA36NA-SSI Absolute Encoder - Ø 36 mm Shaft - Ø 6 mm Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction Enclosure Rating
More informationABSOLUTE MAGNETIC ROTARY ENCODER ANALOG
High-resolution absolute encoder via magnetic technology. Singleturn encoding based on 360 Hall effect technology. Multiturn encoding based on magnetic pulse counter. No batteries used. Main Features -
More informationENCODER. SSI Multiturn. Series , Key-Features: Content:
ENCOER SSI Multiturn Series 8.5863, 8.5883 Content: Order Code Shaft... Order Code Hollow Shaft...3 Order Code Blind Hollow Shaft...3 Connection...4 Technical rawing...5 Technical ata...8 Key-Features:
More informationMaterial: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:
More informationAbsolute encoders multiturn
Sendix M / M8 (shaft / hollow shaft) The Sendix M with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. With a size of just x mm it
More informationMultiturn absolute encoder
0102 Model Number SYNCHRON SERIELLES INTERFACE Features Up to 30 Bit multiturn ATEX approval IECEx approval Flameproof enclosure Removable connection cap Galvanically isolated RS 22 interface Description
More informationInductive Angle Sensor With Analog Output RI360P1-QR14-ELIU5X2
Rectangular, plastic Many mounting possibilities P1-Ri-QR14 included in delivery Measuring range displayed via LED Immune to electromagnetic interference Resolution, 12-bit 4-wire, 15 30 VDC Analog output
More informationStandard Industrial Types RI 58-O / RI 58-T
Synchro flange Universal industry standard encoder Up to 40 000 steps with 10 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable
More informationABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS 422) - Housing: 58 mm - Shaft: 6 or 10 mm - Hollow shaft 12 mm - Blind hollow shaft 15 mm - Max. 65,56 steps
More informationStandard Industrial types RI 58-O / RI 58-T
Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC-2800
NOVOHALL Rotary Sensor non-contacting Series RSC-2800 Special features Non-contacting, magnetic technology Measuring range up to 360 Available with push-on coupling or marked shaft Simple mounting Protection
More informationOnline data sheet ACM36-L1K0-K01 ACS/ACM36 ABSOLUTE ENCODERS
Online data sheet ACM36-L1K0-K01 ACS/ACM36 ACM36-L1K0-K01 ACS/ACM36 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Number of steps per revolution Number
More informationData Sheet for Angle Sensors
ETA25PM - R ETA25PM - F ETA25PM - TS 10 to 100-times longer life compared with multiturn potentiometers Free user programmable start and end position (electrical angle 10 up to 72000 ) Simple user programming
More informationResolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( )
PRAS1 Magnetic Angle Sensor with Analog Output Magnetic angle 0-360 in M12 housing Measurement range 0 to 360 Protection class IP67 / IP69K Analog output Stainless steel housing Non-contact with external
More informationDG 60 L Incremental Encoder
Incremental Encoder Features Incremental encoder with 60 mm outer diameter ugged die-cast aluminum housing Quadrature output with reference marker, complementary output signals Protection to IP 67 Square
More informationPOSIROT. PRAS3EX Magnetic Angle Sensor. Magnetic Angle Sensors (Dust-Ex-proof) Datasheet
Magnetic Angle Sensors (Dust-Ex-proof) Magnetic Angle Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does not form part of
More informationOil & Gas / Heavy Industry Type 2REX-A-NA-SSI
Oil & Gas / Heavy Industry Type 2REX-A-NA-SSI EN 60079 Electrical Specifications Encoder Type: Singleturn Resolution: Number of Revolutions: Supply Voltage: Typical Current Consumption: Accuracy: ± 0,35ᴼ
More informationABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL
Main Features - Compact and heavy-duty industrial model - Interface: Bit-parallel, push pull Œ Short circuit proof - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096
More informationABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous -serial (RS 422) - Housing: 58 mm - Shaft: 6 or 10 mm - Hollow shaft 12 mm - Blind hollow shaft 15 mm - Max. 65,56 steps
More informationSeries BC 58. Absolute Rotary Encoder Series BC 58
Mechanical specifications Shaft diameter Shaft load 6 mm (synchro flange) 10 mm (clamping flange) 10/12 mm (blind hollow shaft) Series BC 58 E Absolute single- and multiturn rotary-encoder with solid shaft
More informationRotary Measuring Technology
SSI or parallel interface Highest shock resistance on the market ( 2500 m/s2, 6 ms acc. to DIN IEC 68-2-27) Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 66 Various options (e.g. LATCH,
More informationStandard Industrial types RI 36-H
Miniature industry encoder for high number of pulses Short mounting length Easy mounting procedure Applications: motors, machine tools, robots, automated SMD equipment NUMBER OF PULSES 5 / 0 / 0 / 5 /
More informationProduct Information. ERN 1085 Incremental Rotary Encoder with Z1 Track
Product Information ERN 1085 Incremental Rotary Encoder with Z1 Track 02/2018 ERN 1085 Rotary encoder with mounted stator coupling Compact dimensions Blind hollow shaft 6 mm Z1 track for sine commutation
More informationResolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( )
PRAS1 Magnetic Angle Sensor with Analog Output Magnetic angle 0-360 in M12 housing Measurement range 0 to 360 Protection class IP67 / IP69K Analog output Stainless steel housing Non-contact with external
More informationNOVOHALL Rotary Sensor touchless transmissive. Series RFX-6900
NOVOHALL Rotary Sensor touchless transmissive Series RFX-6900 Special features Very robust design to extreme environmental conditions Touchless hall technology Electrical range up to 360, in single and
More informationClamps, mounting plate EN :1993, 100 g/11 ms, 100 shocks EN :1995, 20 g 10 Hz-2 khz, 10 cycles Life cycle of bearings
PRAS3 Magnetic Angle Sensor with Analog Output Magnetic angle sensor 0-360 in a 36 mm dia. housing Measurement range 0-360 + Protection class IP67 / IP69K Analog output With 10 mm shaft or 6 mm hollow
More informationOnline data sheet AFS60A-BJPA AFS/AFM60 SSI ABSOLUTE ENCODERS
Online data sheet FS0-JP FS/FM0 SSI FS0-JP FS/FM0 SSI C D E F H I J K L M N O P Q R S T Ordering information Type Part no. FS0-JP 09 Other models and accessories www.sick.com/fs_fm0_ssi Illustration may
More informationPOSIROT. PMIS4, PMIR5 Magnetic incremental encoder. Magnetic wheels for rotative applications PMIS4, PMIR5
Variant e: PMIS4, PMIR 5 POSIROT Magnetic incremental encoder Magnetic wheels for rotative applications All metal housing Protection class IP67 Excellent protection of the active measurement area Highest
More informationOnline data sheet AFS60E-S1AA AFS/AFM60 SSI ABSOLUTE ENCODERS
Online data sheet FS0E-S0009 FS/FM0 SSI SOLUTE ENCODERS FS0E-S0009 FS/FM0 SSI SOLUTE ENCODERS C D E F Ordering information Type Part no. FS0E-S0009 0 Other models and accessories www.sick.com/fs_fm0_ssi
More informationNOVOHALL Rotary Sensor touchless technology transmissive. Series RFC4800 analog
NOVOHALL Rotary Sensor touchless technology transmissive Series RFC4800 analog The RFC 4800 utilizes a separate magnet or magnetic position marker, attached to the rotating shaft to be measured. The orientation
More informationAbsolute Rotary Encoder EXAG Explosion Proof. Device Net
Main Features - Approval: II 2 G/D EEx d II C T6 - Heavy-duty industrial model - Interface: - Max. 65536 steps per revolution (16 Bit) - Max. 16384 revolutions (14 Bit) - Code: Binary Programmable Parameters
More informationhigh grade, temperature resistant plastic, Thermoplast with brass inserts
NOVOHALL Rotary Sensor touchless technology transmissive Series RFD-4000 Special features fully touchless - no shaft or seals to wear measure directly through any non-ferromagnetic material electrical
More informationAbsolute Rotary Encoder EXAG Explosion Proof. Canopen
Main Features - Approval: II 2 G/D EEx d II C T6 - Heavy-duty industrial model - Interface: CAN - Protocol: - Max. 65536 steps per revolution (16 Bit) - Max. 16384 revolutions (14 Bit) - Code: Binary Programmable
More informationOperating Instructions
Operating Instructions Torque Transducer Type CD9515 Series Please read instruction carefully. Important Advice: The torque transducers of type CD9515 are suitable for applications in laboratories (for
More informationDATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER SSI
Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for
More informationInductive angle sensor. 4-wire, analog output. Ri360P1-QR14-ELiU5X2-0,3-RS5. Rectangular, plastic Many mounting possibilities
Rectangular, plastic Many mounting possibilities Positioning element P1-Ri-QR14 included in delivery LED indicates measuring range Immune to electromagnetic interferences 12 bit resolution 4-wire, 15 30
More informationOnline data sheet AFS60B-S4PA AFS/AFM60 SSI ABSOLUTE ENCODERS
Online data sheet FS60-S4P032768 FS/FM60 SSI FS60-S4P032768 FS/FM60 SSI C D E F Ordering information Type Part no. FS60-S4P032768 1037483 Other models and accessories www.sick.com/fs_fm60_ssi Illustration
More informationCompact CANopen. RoHS 2/22. Shock / vibration resistant. High shaft load capacity e
The Sendix M36 with Energy Harvesting Technology is an electronic encoder in miniature format, without gear and without battery. It is characterized by robustness, reliability and cost-efficiency. pending
More informationOnline data sheet AFM60B-S4PC AFS/AFM60 SSI ABSOLUTE ENCODERS
Online data sheet FM60-S4PC032768 FS/FM60 SSI C D E F H I J K L M N O P Q R S T Ordering information Type Part no. FM60-S4PC032768 1037504 Other models and accessories www.sick.com/fs_fm60_ssi Illustration
More informationTECHNICAL DATASHEET Absolute Encoder AC 36 - BiSS / SSI
Overall length: 36 mm For equipment engineering and industry Up to 22 Bit Resolution Singleturn + 12 Bit Multiturn Solid or hollow shaft version available +100 C operating temperature 10,000 rpm (continuous)
More informationXXXX e. X d.. X X X a
The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
More informationhigh grade, temperature resistant plastic, Thermoplast with brass inserts
NOVOHALL Rotary Sensor touchless technology transmissive Series RFD4000 analog Special features fully touchless - no shaft or seals to wear measure directly through any non-ferromagnetic material electrical
More informationTECHNICAL DATASHEET Incremental Encoder RI 30
Miniature encoder for industrial use Low current consumption High noise interference immunity Cable lengths of up to 00 m Suitable for high pulse frequencies High protection class Applications: CNC machines,
More information