Power-off Isolation, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
|
|
- Anis Hampton
- 5 years ago
- Views:
Transcription
1 Power-off Isolation,,. V to 5.5 V, SPDT Analog Switch (: Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for. V to 5.5 V operation with a single power rail. Fabricated with high density CMOS technology, the device achieves low on resistance of and switch off capacitance of 7 pf at a 5 V power supply and low power consumption, and fast switching speeds. The features break before make switching performance. It can handle both analog and digital signals and permits signals with amplitudes of up to to be transmitted in either direction. A power-off protection circuit is built into the switch to prevent an abnormal current path through the signal pins during the power-off condition. The part can withstand greater than 7 kv ESD (human body model). The is available in the compact SC-7-L package. FEATURES Low switch on-resistance ( ) +. V to +5.5 V single supply operation Available Isolation in powered-off mode Available Low voltage logic control Control logic inputs can go over Low parasitic capacitance Break before make switching Latch-up performance exceeds ma per JESD 7 High ESD rating - 7 V human body model (JS-) - V charge device model (JS-) Material categorization: for definitions of compliance please see Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details APPLICATIONS Battery powered devices Consumer and computing Instrumentation Medical equipment Control and automation FUNCTIONAL BLOCK DIAGRAM AND P CONFIGURATION SC-7 NO (Source ) 5 GND 3 4 NC (Source ) Top view Device marking H TRUTH TABLE LOGIC NC NO On Off Off On Notes Logic. V Logic.4 V ORDERG FORMATION TEMP. RANGE PACKAGE PART NUMBER -4 C to +5 C SC-7- DL-T-GE3 S-4-Rev. C, 3-Apr- Document Number: 7 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
2 ABSOLUTE MAXIMUM RATGS PARAMETER LIMIT UNIT,, NC, NO, reference to GND -.3 to V Continuous current (any terminal) ± 5 Peak current (pulsed at ms, % duty cycle) ± ma Storage temperature -5 to +5 C Power dissipation (packages) a -pin SC-7 b 5 mw ESD / HBM JS- 7 ESD / CDM JS- V Latch up Per JESD7 with.5 x voltage clamp ma Notes a. All leads welded or soldered to PC board b. Derate 3. mw/ C above 7 C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. SPECIFICATIONS ( = 5 V) TEST CONDITIONS UNLESS OTHERWISE SPECIFIED = 5 V, ± % V =. V or.4 V e LIMITS -4 C to +5 C PARAMETER SYMBOL TEMP. a UNIT M. b TYP. c MAX. b Analog Switch Analog signal range d V NO, V NC V Full - V Drain-source on-resistance d R DS(on) = 4.5 V, V = 3 V, I NO, I NC = ma Room - Full - 5 R DS(on) flatness d R DS(on) = 5 V, V flatness =.5 V, 3.5 V, I NO, I NC = ma Room R DS(on) match d R DS(on) = 4.5 V, V = 3 V, I NO, I NC = ma Room -.4 I NO(off), Room Switch-off leakage current f I NC(off) = 5.5 V, Full -4-4 V NO, V NC = V / 4.5 V, V = 4.5 V / V Room - - I (off) na Full -4-4 Channel-on leakage current f = 5.5 V, Room - - I (on) V NO, V NC = V = V / 4.5 V Full -4-4 Power-down leakage I PD = V, V = 5 V, NO/NC open, V = GND Full = V, V NO, V NC = 5 V, open, V = GND Full Digital Control Input high voltage V H Full Input low voltage V L Full - -. V Input capacitance d C Full - - pf Input current I L or I H V = V or Full - - μa Dynamic Characteristics Turn-on time d t ON Room - 3 Full Turn-off time d t OFF V NO or V NC = 3 V, R L = 3, C L = 35 pf Room - 5 ns Full Break-before-make time d t BBM Room - - Charge injection d Q J C L = nf, V GEN = V, V NO, V NC = V, R GEN = Room - - pc Off-isolation d OIRR Room R L = 5, C L = 5 pf, f = MHz Crosstalk d X TALK Room db NO, NC off capacitance d C NO(off) Room C NC(off) V = V or, f = MHz Room pf Channel-on capacitance d C ON Room Power Supply Power supply current d I+ V = V or Full -.4 μa S-4-Rev. C, 3-Apr- Document Number: 7 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT μa
3 SPECIFICATIONS ( = 3 V) PARAMETER SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED = 3 V, ± % V =.4 V or V e TEMP. a LIMITS -4 C to +5 C M. b TYP. c MAX. b UNIT Analog Switch Analog signal range d V NO, V NC V Full - V Drain-source on-resistance d R DS(on) =.7 V, V =.5 V, I NO, I NC = ma Room Full R DS(on) flatness d R DS(on) = 3 V, V flatness = V to, I NO, I NC = ma Room R DS(on) match d R DS(on) =.7 V, V =.5 V, I NO, I NC = ma Room -.3 I NO(off), Room -4-4 pa I NC(off) = 3.3 V, Switch-off leakage current f Full -4-4 na V NO, V NC = V / 3 V, V = 3 V / V Room - - pa I (off) Full - - na Channel-on leakage current f = 3.3 V, Room - - pa I (on) V NO, V NC = V = V / 3 V Full - - na Digital Control Input high voltage V H Full - - Input low voltage V L Full V Input capacitance d C Full - - pf Input current I L or I H V = V or Full - - μa Dynamic Characteristics Turn-on time d t ON Room Full Turn-off time d t OFF V NO or V NC = V, R L = 3, C L = 35 pf Room ns Full Break-before-make time d t BBM Room - - Charge injection d Q J C L = nf, V GEN = V, V NO, V NC = V, R GEN = Room pc Off-isolation d OIRR Room R L = 5, C L = 5 pf, f = MHz Crosstalk d X TALK Room db NO, NC off capacitance d C NO(off) Room C NC(off) V = V or, f = MHz Room pf Channel-on capacitance d C ON Room Power Supply Power supply current d I+ V = V or Full -. μa S-4-Rev. C, 3-Apr- 3 Document Number: 7 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
4 SPECIFICATIONS ( =.5 V) PARAMETER SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED =.5 V, ± % V =.4 V or V e TEMP. a LIMITS -4 C to +5 C M. b TYP. c MAX. b UNIT Analog Switch Analog signal range d V NO, V NC V Full - V Drain-source on-resistance d R DS(on) =. V, V = V, I NO, I NC = ma Room - 3 Full d - 4 R DS(on) flatness d R DS(on) =.5 V, V flatness = V to, I NO, I NC = ma Room R DS(on) match d R DS(on) =. V, V =. V, I NO, I NC = ma Room -. I NO(off), Room - - pa I NC(off) =.7 V, Switch-off leakage current f V NO, V NC =.5 V /.5 V, V =.5 V /.5 V Room - - pa I (off) Channel-on leakage current f =.7 V, Room - - pa I (on) V NO, V NC = V =.5 V /.5 V Digital Control Input high voltage V H Full - - Input low voltage V L Full V Input capacitance d C Full - - pf Input current I L or I H V = V or Full - - μa Dynamic Characteristics Turn-on time d t ON Room - 5 Full d - - Turn-off time d t OFF V NO or V NC =.5 V, R L = 3, C L = 35 pf Room - 35 ns Full Break-before-make time d t BBM Room d - - Charge injection d Q J C L = nf, V GEN = V, V NO, V NC = V, R GEN = Room pc Off-isolation d OIRR Room R L = 5, C L = 5 pf, f = MHz Crosstalk d X TALK Room db NO, NC off capacitance d C NO(off) Room C NC(off) V = V or, f = MHz Room pf Channel-on capacitance d C ON Room Power Supply Power supply current d I+ V = V or Full - - μa S-4-Rev. C, 3-Apr- 4 Document Number: 7 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
5 SPECIFICATIONS ( = V) PARAMETER SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED = V, ± % V =.4 V or. V e TEMP. a LIMITS -4 C to +5 C M. b TYP. c MAX. b UNIT Analog Switch Analog signal range d V NO, V NC V Full - V Drain-source on-resistance d R DS(on) =. V, V = V, I NO, I NC = ma Room - 37 Full d - 3 R DS(on) flatness d R DS(on) = V, V flatness = V to, I NO, I NC = ma Room R DS(on) match d R DS(on) =. V, V = V, I NO, I NC = ma Room -.4 I NO(off), Room - - pa I NC(off) =. V, Switch-off leakage current f V NO, V NC =.5 V /.5 V, V =.5 V /.5 V Room - - pa I (off) Channel-on leakage current f =. V, Room - - pa I (on) V NO, V NC = V =.5 V /.5 V Digital Control Input high voltage V H Full. - - Input low voltage V L Full V Input capacitance d C Full - - pf Input current I L or I H V = V or Full - - μa Dynamic Characteristics Turn-on time d t ON Room - 5 Full d - - Turn-off time d t OFF V NO or V NC =.5 V, R L = 3, C L = 35 pf Room ns Full d Break-before-make time d t BBM Room - - Charge injection d Q J C L = nf, V GEN = V, V NO, V NC = V, R GEN = Room -. - pc Off-isolation d OIRR Room R L = 5, C L = 5 pf, f = MHz Crosstalk d X TALK Room db NO, NC off capacitance d C NO(off) Room C NC(off) V = V or, f = MHz Room pf Channel-on capacitance d C ON Room Power Supply Power supply current d I+ V = V or Full - - μa Notes a. Room = 5 C, full = as determined by the operating suffix b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet c. Typical values are for design aid only, not guaranteed nor subject to production testing d. Guarantee by design, nor subjected to production test e. V = input voltage to perform proper function f. Guaranteed by 5 V leakage testing, not production tested S-4-Rev. C, 3-Apr- 5 Document Number: 7 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
6 TYPICAL CHARACTERISTICS (5 C, unless otherwise noted) R ON - On-Resistance (Ω) = +. V I S = - ma = +.7 V = +3. V = +3.3 V = +4.5 V = +5.5 V V - Analog Voltage (V) R ON - On-Resistance (Ω) C +5 C +5 C = +. V I S = ma V - Analog Voltage (V) R DS(on) vs. V and Supply Voltage R DS(on) vs. Analog Voltage and Temperature +5 C C R ON - On-Resistance (Ω) 4 = +4.5 V I S = ma +5 C -4 C V - Analog Voltage (V) R ON - On-Resistance (Ω) 3 3 = +. V I S = ma -4 C +5 C.5.5 V - Analog Voltage (V) R DS(on) vs. Analog Voltage and Temperature R DS(on) vs. Analog Voltage and Temperature +5 C 5 I NC/NO(OFF),V = V, V NC/NO = 4.5 V +5 C I (OFF),V = 4.5 V, V NC/NO = V R ON - On-Resistance (Ω) 4 = +.7 V I S = ma -4 C V - Analog Voltage (V) Leakage Current (pa) I (ON),V = 4.5 V I NC/NO(OFF),V = 4.5 V, V NC/NO = V I (OFF),V = V, V NC/NO = 4.5 V = +5.5 V I (ON),V = V R DS(on) vs. Analog Voltage and Temperature Leakage Current vs. Temperature S-4-Rev. C, 3-Apr- Document Number: 7 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
7 TYPICAL CHARACTERISTICS (5 C, unless otherwise noted) Leakage Current (pa) I NC/NO(OFF),V = V, V NC/NO = 3 V I (OFF),V = 3 V, V NC/NO = V I (ON),V = 3 V I NC/NO(OFF),V = 3 V, V NC/NO = V I (OFF),V = V, V NC/NO = 3 V = +3.3 V I (ON),V = V Loss, OIRR, X TALK (db) Loss X TALK - OIRR = +5 V - K M M M G Frequency (Hz) Leakage Current vs. Temperature Insertion Loss, Off-Isolation Crosstalk vs. Frequency I+ - Supply Current (na) = +5.5 V V = or GND -4-4 Supply Current vs. Temperature I+ - Supply Current (μa).... = +5 V. K K M M Input Switching Frequency (Hz) Supply Current vs. Input Switching Frequency 7. I+ - Supply Current (μa) = +5 V V =. V t ON, t OFF - Switching Time (ns) 4 4 = +3 V, t ON = +3 V, t OFF = +5 V, t ON = +5 V, t OFF Supply Current vs. Temperature Switching Time vs. Temperature S-4-Rev. C, 3-Apr- 7 Document Number: 7 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
8 TYPICAL CHARACTERISTICS (5 C, unless otherwise noted) t ON, t OFF - Switching Time (ns) 3 4 = +. V, t ON = +.5 V, t ON 4 = +. V, t OFF = +.5 V, t OFF I+ - Supply Current (μa) = 3. V =.5 V = 5 V = V V (V) Switching Time vs. Temperature Supply Current vs. Enable Input Voltage V - Switching Threshold (V) C to +5 C V H V L Supply Voltage (V) Q J - Charge Injection (pc) = V =.5 V = 3 V = 5 V V NC/NO - Analog Voltage (V) Switching Threshold vs. Supply Voltage Charge Injection vs. Analog Voltage I (PD) Power Down Leakage Current (na) = V = GND 5 C 5 C 4 V (V) -4 C I (PD) Power Down Leakage Current (na) = V = GND, V = +3 V -4-4 Power Down Leakage Current vs. V Power Down Leakage Current vs. Temperature S-4-Rev. C, 3-Apr- Document Number: 7 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
9 TEST CIRCUITS Switch NO or NC Switch Output V OUT Logic Input 3 V V 5 % t r < ns t f < ns Logic Input GND R L 3 C L 35 pf Switch Output V t ON.9 x V OUT t OFF C L (includes fixture and stray capacitance) R V OUT = V L R L + R ON Logic = switch on Logic input waveforms inverted for switches that have the opposite logic sense. Fig. - Switching Time Logic Input 3 V t r < 5 ns t f < 5 ns V NO NO V O V V NC NC R L 3 Ω C L 35 pf V NC = V NO V O 9 % GND Switch Output V t D t D C L (includes fixture and stray capacitance) Fig. - Break-Before-Make Interval V gen + R gen 3 V NC or NO GND V OUT C L = nf V OUT On ΔV OUT Off On Q = ΔV OUT x C L depends on switch configuration: input polarity determined by sense of switch. Fig. 3 - Charge Injection S-4-Rev. C, 3-Apr- 9 Document Number: 7 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
10 TEST CIRCUITS nf V,.4 V NC or NO R L GND V NC/NO Off Isolation = log V Analyzer Fig. 4 - Off-Isolation nf V,.4 V NC or NO Meter HP49A Impedance Analyzer or Equivalent GND f = MHz Fig. 5 - Channel Off / On Capacitance maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and reliability data, see S-4-Rev. C, 3-Apr- Document Number: 7 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
11 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 7 VISHAY TERTECHNOLOGY, C. ALL RIGHTS RESERVED Revision: -Feb-7 Document Number: 9
Power-off Protection, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
Power-off Protection,,. V to 5.5 V, SPDT Analog Switch (: Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for. V to 5.5 V operation with a single
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG9411 DESCRIPTION The DG9411 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low
More informationFEATURES APPLICATIONS
.7, Low On Resistance, + V, +5 V, +3 V, ± 5 V, SPST Switches DESCRIPTION The DG9E and DG9E are monolithic single-pole-single-throw (SPST) analog switches. The DG9E has a normally closed function. The DG9E
More information0.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch
.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch DESCRIPTION The DG2523 and DG2524 are four-channel single-pole double-throw (SPDT) analog switches. The DG2523 has two control inputs
More informationFEATURES BENEFITS APPLICATIONS. PARAMETER LIMIT UNIT Reference to GND V to +6 IN, COM, NC, NO a -0.3 to (V )
DESCRIPTION www.vishay.com.5, High Bandwidth, Dual SPDT Analog Switch The DGE is a low-voltage dual single-pole / double-throw monolithic CMOS analog switch. Designed to operate from. V to 5.5 V power
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
More informationDG2715, DG2716. Low-Voltage, 0.4 R ON, Single SPST Analog Switch. Vishay Siliconix DESCRIPTION FEATURES BENEFITS APPLICATIONS
DG275, DG276 Low-Voltage, 0.4 R ON, Single SPST Analog Switch DESCRIPTION The DG275, DG276 are low voltage, single supply, dual SPST analog switches. Designed for high performance switching of analog signals,
More information0.39, Low-R ON, Ultra-Low Distortion, Compact DPDT Analog Switch
.39, Low-R ON, Ultra-Low Distortion, Compact DPDT Analog Switch DESCRIPTION The is a compact, low resistance, ultra-low distortion double pole double throw (DPST) analog switch. The features a flat.39
More informationLow-Voltage, Low R ON, SPDT Audio Switch with Negative Swing Capability
Low-Voltage, Low R ON, SPDT Audio Switch with Negative Swing Capability DG6, DG63 DESCRIPTION The DG6, DG63 is a low on-resistance, single-pole/ double-throw monolithic CMOS analog switch with negative
More informationLow Voltage, Dual SPDT Analog Switch with Charge Pump
Low Voltage, Dual SPDT Analog Switch with Charge Pump DG, DG, DG DESCRIPTION The DG, DG, DG are monolithic CMOS analog switching products designed for high performance switching of analog signals. Combining
More informationLow-Voltage Single-Supply, SPDT Analog Switch in SC-70
Low-oltage Single-Supply, SPDT Analog Switch in SC-7 DESCRIPTION The DG499 is a cost effective upgrade to other types of 499 low-voltage, single-pole/double-throw analog switches available in the industry
More informationDG2535/DG Ω Low-Voltage Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS APPLICATIONS
0.35-Ω Low-Voltage Dual SPDT Analog Switch DG2535/DG2536 DESCRIPTION The DG2535/DG2536 is a sub Ω (0.35 Ω at 2.7 V) dual SPDT analog switches designed for low voltage applications. The DG2535/DG2536 has
More informationDG2706. High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch. Vishay Siliconix DESCRIPTION FEATURES APPLICATIONS
High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch DESCRIPTION The DG2706 is a high speed, low voltage, low On-resistance, quad SPDT (single pole double throw) analog switch. It operates from a.6
More information0.45, Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability
5, Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability DESCRIPTION The is a dual SPDT low on-resistance switch designed to from a single 1.6 V to 5.5 V power supply. It is a bi-directional
More informationAutomotive 125 C Analog Switch Dual DPDT / Quad SPDT, 0.37, 338 MHz Bandwidth
Automotive 125 C Analog Switch Dual DPDT / Quad SPDT, 0.37, 338 MHz Bandwidth DESCRIPTION The, is a four-channel single-pole double-throw (SPDT) analog switch with two control inputs. It is also known
More informationSub-Ω, Low Voltage, SPDT Analog Switches with Over Current Protection
New Product DG/DG1 Sub-Ω, Low Voltage, SPDT Analog Switches with Over Current Protection DESCRIPTION The DG/DG1 are low-voltage single single-pole/ double-throw monolithic CMOS analog switches. Designed
More information700 MHz, -3 db Bandwidth; Single SPDT Analog Switch
7 MHz, -3 db Bandwidth; Single SPDT Analog Switch DESCRIPTION is a low R ON, high bandwidth analog switch configured in single SPDT. It achieves 5 switch on resistance, greater than 7 MHz -3 db bandwidth
More informationPrecision Quad SPDT Analog Switch
Precision Quad SPDT Analog Switch DESCRIPTION The consist of four independently controlled single-pole double-throw analog switches. These monolithic switch is designed to control analog signals with a
More informationHigh-Bandwidth, Low Voltage, Dual SPDT Analog Switches
DG9E High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DESCRIPTION The DG9E is monolithic CMOS dual single-pole / double-throw (SPDT) analog switches. It is specifically designed for low-voltage,
More informationFEATURES DG2538, MSOP-10 V+ 1 V+ COM 1. Top View. Temperature Range Package Part Number
Dual SPST Switches DG, DG8, DG9 DESCRIPTION The DG, DG8, and DG9 are low voltage, precision dual SPST switches that can be operated in a single supply or in a dual supply configuration power supply with
More informationDG2307. High-Speed, Low r ON, SPDT Analog Switch. Vishay Siliconix. (2:1 Multiplexer) RoHS COMPLIANT DESCRIPTION FEATURES APPLICATIONS
High-Speed, Low r ON, SPDT Analog Switch (2:1 Multiplexer) DG2307 DESCRIPTION The DG2307 is a single-pole-double-throw switch/2:1 mux designed for 2 to 5.5 V applications. Using proprietary sub-micro CMOS
More informationHigh-Speed Quad Monolithic SPST CMOS Analog Switch
DG27B High-Speed Quad Monolithic SPST CMOS Analog Switch DESCRIPTION The DG27B high speed quad single-pole single-throw analog switch is intended for applications that require low on-resistance, low leakage
More information3.9, 8-Channel / Dual 4-Channel, ± 15 V, +12 V, ± 5 V Precision Multiplexers
DG148E, DG149E 3.9, 8-Channel / Dual 4-Channel, ± 15, +12, ± 5 Precision Multiplexers DESCRIPTION The DG148E is a precision analog multiplexer comprising eight single-ended channels. The DG149E is a dual
More informationFEATURES APPLICATIONS. Switches are shown for a Logic 0 Input
2, Low Leakage, Low Parasitic and Low Charge Injection, Quad SPST Analog Switches ESCRIPTION The G251, G252, and G253 are monolithic quad single-pole single-throw (SPST) analog switches that operate from
More informationDG1411E, DG1412E, DG1413E. 1.5 On Resistance, ± 15 V / +12 V / ± 5 V, Quad SPST Switches. Vishay Siliconix.
1.5 On Resistance, ± 15 / +12 / ± 5, Quad SPST Switches DESCRIPTION The are ± 15 precision monolithic quad single-pole single-throw (SPST) CMOS analog switches. Built on a new CMOS process, the ishay Siliconix
More informationPrecision Monolithic Quad SPST CMOS Analog Switches
Precision Monolithic Quad SPST CMOS Analog Switches DESCRIPTION The are ± 15 precision monolithic quad single-pole single-throw (SPST) CMOS analog switches. Built on a new CMOS process, the ishay Siliconix
More informationDG3157. High-Speed, Low r ON, SPDT Analog Switch. Vishay Siliconix. (2:1 Multiplexer/Demultiplexer Bus Switch) RoHS* COMPLIANT DESCRIPTION FEATURES
High-Speed, Low r ON, SPDT Analog Switch (2:1 Multiplexer/Demultiplexer Bus Switch) DG3157 DESCRIPTION The DG3157 is a high-speed single-pole double-throw, low power, TTL-Compatible bus switch. Using sub-micro
More informationDual SPDT Analog Switch
Dual SPDT Analog Switch DESCRIPTION The DG9236 is a CMOS, dual SPDT analog switch designed to operate from = 2.7 V to = 6 V max. operating, single supply. All control logic inputs have a guaranteed.8 V
More informationMonolithic Dual SPST CMOS Analog Switch
Monolithic Dual SPST CMOS Analog Switch DG00B DESCRIPTION The DG00B is a dual, single-pole, single-throw analog switch designed to provide general purpose switching of analog signals. This device is ideally
More informationImproved Quad CMOS Analog Switches
Improved Quad CMOS Analog Switches DESCRIPTION The analog switches are highly improved versions of the industry-standard DG2A, DG22. These devices are fabricated in proprietary silicon gate CMOS process,
More informationHigh-Speed Quad Monolithic SPST CMOS Analog Switch
High-Speed Quad Monolithic SPST CMOS Analog FEATURES BENEFITS APPLICATIONS Fast ing : 55 ns Low Charge Injection: 5 pc Low r DS(on) : 3 TTL/CMOS Compatible Low Leakage: pa Fast Settling Times Reduced ing
More informationFEATURES DG721, TDFN-8 COM 2 7 IN 1 NO 1 1 NO 2. Top View. Device Marking for MSOP-8: 721
.8 V to. V, Dual SPST Switches DG, DG, DG DESCRIPTION The DG, DG and DG are precision dual SPST switches designed to operate from single.8 V to. V power supply with low power dissipation. The DG, DG and
More informationN-Channel 30 V (D-S) MOSFET
N-Channel 3 V (D-S) MOSFET 3.3 mm Top View PRODUCT SUMMARY PowerPAK 22-8 Dual 3.33 mm D 2 D 2 6 5 4 G Bottom View V DS (V) 3 R DS(on) max. (Ω) at V GS = 4.5 V.22 R DS(on) max. (Ω) at V GS = 2.5 V.26 Q
More informationPrecision Monolithic Quad SPST CMOS Analog Switches
Precision Monolithic Quad SPST CMOS Analog Switches DESCRIPTION The DG4 series of monolithic quad analog switches was designed to provide high speed, low error switching of precision analog signals. Combining
More informationLoad Switch with Level-Shift
Load Switch with Level-Shift Si8DDL Marking Code: VD SOT-33 SC-7 ( leads) S 2 ON/OFF R, C Top View PRODUCT SUMMARY V DS (V) 2 R DS(on) ( ) at V IN =. V.2 R DS(on) ( ) at V IN = 2. V.3 R DS(on) ( ) at V
More informationN-Channel 60-V (D-S) MOSFET
Si8DS N-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A). at V GS = V.. at V GS = 4.5 V.7 FEATURES Halogen-free According to IEC 4-- Available TrenchFET Power MOSFET % R g Tested TO-
More information0.3 pc Charge Injection, 100 pa Leakage CMOS ± 5 V / 5 V / 3 V Dual SPDT Analog Switch
0.3 pc Charge Injection, pa Leakage CMOS ± 5 / 5 / 3 Dual SPDT Analog Switch DESCRIPTION The is a dual SPDT CMOS, analog switch, designed to operate from a +3 to +16 single supply, or from ± 3 to ± 8,
More informationP-Channel 30-V (D-S), MOSFET
SUD5P3- P-Channel 3-V (D-S), MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) (A) a. at V GS = - V - 5-3.8 at V GS = -.5 V - 2 FEATURES TrenchFET Power MOSFETs RoHS COMPLIANT S TO-252 G Drain Connected to
More informationAutomotive Dual P-Channel 30 V (D-S) 175 C MOSFET
Automotive Dual P-Channel 3 V (D-S) 75 C MOSFET D 6 Marking Code: 9B TSOP-6 Dual D S 5 G Top View S 3 G FEATURES TrenchFET power MOSFET AEC-Q qualified % R g and UIS tested Material categorization: for
More informationCommon - Drain Dual N-Channel 30 V (S1-S2) MOSFET
SiSFDN Common - Drain Dual N-Channel 3 V (S-S2) MOSFET 3.3 mm Top View PowerPAK 22-8SCD S S 8 S 2 7 S 2 6 5 3.3 mm PRODUCT SUMMARY V SS2 (V) 3 R SS2(on) max. () at V GS = V.5 R SS2(on) max. () at V GS
More informationN-Channel 12 V (D-S) MOSFET
N-Channel 2 V (D-S) MOSFET SiUD42ED.4 mm PowerPAK 86 Single D 3 FEATURES TrenchFET power MOSFET Ultra small.8 mm x.6 mm outline Ultra thin.4 mm max. height Typical ESD protection 5 V (HBM).8 mm Top View.6mm
More informationCMOS Analog Switches (Obsolete for non-hermetic. Use DG304B Series as pin-for-pin replacements.)
DGA_MIL/A_MIL/A_MIL/A_MIL CMOS Analog Switches (Obsolete for non-hermetic. Use DGB Series as pin-for-pin replacements.) -V Input Range Fast Switching t ON : ns Low r DS(on) : Single Supply Operation CMOS
More informationN- and P-Channel 2.5-V (G-S) MOSFET
N- and P-Channel.5-V (G-S) MOSFET PRODUCT SUMMARY V DS (V) (Ω) (A) N-Channel. at = 4.5 V ± 4.5.4 at =.5 V ± 3.9 P-Channel -.5 at = - 4.5 V ± 3.5.85 at = -.5 V ±.7 FEATURES Halogen-free Option Available
More informationAutomotive Dual N-Channel 20 V (D-S) 175 C MOSFET
SQ9EEH Automotive Dual N-Channel V (D-S) 75 C MOSFET D 6 SOT-363 SC-7 Dual (6 leads) S 4 G 5 S Top View G 3 D FEATURES TrenchFET power MOSFET AEC-Q qualified % R g tested Typical ESD protection: 8 V Material
More informationN-Channel 2.5-V (G-S) Battery Switch, ESD Protection
N-Channel.-V (G-S) Battery Switch, ESD Protection Si694AEDQ PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).33 at V GS = 4. V 4.6 8.38 at V GS = 3. V 4.3.4 at V GS =. V 4. FEATURES Halogen-free Low R DS(on)
More informationP-Channel 1.8 V (G-S) MOSFET
Si7DL P-Channel. V (G-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).9 at V GS = -.5 V ±.9 -.5 at V GS = -.5 V ±.7.5 at V GS = -. V ±. FEATURES Halogen-free According to IEC 9-- Definition TrenchFET
More informationComplementary 20 V (D-S) MOSFET
SiDL Complementary V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) Q g (Typ.).9 at V GS =. V. N-Channel.7 at V GS =.7 V..7. at V GS =. V..99 at V GS = -. V -. P-Channel -.6 at V GS = -.7 V
More informationLow Power, High Voltage SPST Analog Switches
Low Power, High Voltage SPST Analog Switches DG67, DG68 DESCRIPTION The DG67 and DG68 are dual supply single-pole/singlethrow (SPST) switches. On resistance is max. and flatness is 2 max. over the specified
More informationComplementary 30 V (G-S) MOSFET
Si39DL Complementary 3 V (G-S) MOSFET PRODUCT SUMMARY V DS (V) ( ) I D (A) N-Channel 3.8 at V GS = V 3.7 at V GS =. V. P-Channel - 3.9 at V GS = - V -..7 at V GS = -. V -.33 FEATURES TrenchFET Power MOSFET
More informationAutomotive P-Channel 40 V (D-S) 175 C MOSFET
Automotive P-Channel 4 V (D-S) 75 C MOSFET SQ39ES PRODUCT SUMMARY V DS (V) - 4 R DS(on) ( ) at V GS = - V.75 R DS(on) ( ) at V GS = - 4.5 V.45 I D (A) - 4.6 Configuration Single FEATURES Halogen-free According
More informationDual N-Channel 30-V (D-S) MOSFET
Dual N-Channel 3-V (D-S) MOSFET PRODUCT SUMMARY V DS (V) (Ω) I D (A).95 at V GS = V. 3. at V GS = 4.5 V 9.4 FEATURES Halogen-free Option Available TrenchFET Power MOSFET % R g Tested APPLICATIONS DC/DC
More informationN-Channel 200 V (D-S) 175 C MOSFET
N-Channel 2 V (D-S) 75 C MOSFET SUP942E TO-22AB S D Top View G PRODUCT SUMMARY V DS (V) 2 R DS(on) max. ( ) at V GS = V.52 R DS(on) max. ( ) at V GS = 7.5 V.69 Q g typ. (nc) 58 I D (A) 9 Configuration
More informationAutomotive N-Channel 200 V (D-S) 175 C MOSFET
Automotive N-Channel 2 V (D-S) 75 C MOSFET SQM942E FEATURES TO-263 Top View G D S TrenchFET power MOSFET Package with low thermal resistance AEC-Q qualified % R g and UIS tested Material categorization:
More information0.5 pc Charge Injection, 100 pa Leakage, Dual SPDT Analog Switch
0.5 pc Charge Injection, pa Leakage, Dual SPDT Analog Switch DESCRIPTION The is an analog CMOS, dual SPDT switch, designed to operate from a +2.7 V to +12 V single supply or from ± 2.7 V to ± 5 V, dual
More informationAutomotive P-Channel 40 V (D-S) 175 C MOSFET
Automotive P-Channel 4 V (D-S) 75 C MOSFET SQM43EL TO-263 S G S D G Top View D P-Channel MOSFET PRODUCT SUMMARY V DS (V) -4 R DS(on) () at V GS = - V.3 R DS(on) () at V GS = -4.5 V.38 I D (A) -2 Configuration
More informationDual N-Channel 30 V (D-S) MOSFETs
Dual N-Channel 3 V (D-S) MOSFETs 3 mm mm Top View PRODUCT SUMMARY PowerPAIR 3 x 3 3 mm D Bottom View CHANNEL- CHANNEL-2 V DS (V) 3 3 R DS(on) max. ( ) at V GS = V.285.5 R DS(on) max. ( ) at V GS = 4.5
More informationN-Channel 60 V (D-S) MOSFET
N-Channel 60 V (D-S) MOSFET N700K Marking code: 7K D 3 SOT-3 (TO-36) G Top View PRODUCT SUMMARY V DS (V) 60 R DS(on) max. ( ) at V GS = 0 V Q g typ. (nc) 0.4 I D (ma) 300 Configuration Single S FEATURES
More informationN-Channel 150-V (D-S) MOSFET
N-Channel 5-V (D-S) MOSFET PRODUCT SUMMARY V (BR)DSS (V) R DS(on) (Ω) I D (A) Q g (Typ.) 5.8 at V GS = V 75 d 64 FEATURES TrenchFET Power MOSFET % R g and UIS Tested APPLICATIONS Primary Side Switch Power
More informationN- and P-Channel 30-V (D-S) MOSFET
N- and P-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) (Ω) I D (A) N-Channel.3 at V GS = V 5.9.53 at V GS = 4.5 V 4.9 P-Channel -.53 at V GS = - V - 4.9.9 at V GS = - 4.5 V - 3.7 FEATURES Halogen-free
More informationN- and P-Channel 1.8 V (G-S) MOSFET
Si7DH N- and P-Channel.8 V (G-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) (A). at V GS =. V. N-Channel.8 at V GS =. V.. at V GS =.8 V.. at V GS = -. V -.86 P-Channel -.88 at V GS = -. V -.67.6 at V
More informationP-Channel 20 V (D-S) MOSFET
P-Channel 2 V (-S) MOSFET 6 Marking code: BQ TSOP-6 Single S 4 5 Top View PROUCT SUMMARY V S (V) -2 R S(on) max. ( ) at V GS = -4.5 V.24 R S(on) max. ( ) at V GS = -2.5 V.32 R S(on) max. ( ) at V GS =
More informationP-Channel 20-V (D-S) MOSFET with Schottky Diode
P-Channel -V (D-S) MOSFET with Schottky Diode Si3853DV PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A). at V GS = -.5 V ±.8 -.3 at V GS = -.5 V ±.3 FEATURES Halogen-free According to IEC 9-- Definition LITTLE
More informationP-Channel 8-V (D-S) MOSFET
New Product P-Channel 8-V (D-S) MOSFET Si25ADS PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) Q g (Typ.).4 at V GS = - 4.5 V - 4. - 8.6 at V GS = - 2.5 V -.4 7.8 nc.88 at V GS = -.8 V - 2. FEATURES Halogen-free
More informationN-Channel 30 V (D-S) MOSFET
N-Channel 3 V (D-S) MOSFET SUD5N3-12P-GE3 PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a.12 at V GS = 1 V 16.8 3.175 at V GS = 4.5 V 13.9 FEATURES TrenchFET power MOSFET 1 % R g and UIS tested Material
More informationComplementary N- and P-Channel 40-V (D-S) MOSFET
Complementary N- and P-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) r DS(on) (Ω) I D (A) a Q g (Typ.) N-Channel.7 at V GS = V 8. at V GS =.5 V 8 2 P-Channel -. at V GS = - V - 8.5 at V GS = -.5 V -
More informationP-Channel 40 V (D-S) 175 C MOSFET
P-Channel 4 V (D-S) 75 C MOSFET SUP/SUB65P4-5 PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).5 at V GS = - V - 65-4.23 at V GS = - 4.5 V - 5 FEATURES TrenchFET Power MOSFET Compliant to RoHS Directive 22/95/EC
More informationDual N-Channel 30 V (D-S) MOSFET
Dual N-Channel 3 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A). at V GS = V 7.5 3.3 at V GS = 4.5 V 6.5 FEATURES Halogen-free According to IEC 649-- Definition TrenchFET Power MOSFET PWM
More informationDual N-Channel 30 V (D-S) MOSFET
Dual N-Channel 3 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) () MAX. I D (A) Q g (TYP.) 3 2.5 mm.29 at V GS = V 4.5 a 3 nc.25 at V GS = V 4.5 a.33 at V GS = 4.5 V 4.5 a PowerPAK SC-7-L Dual 2.5 25
More informationSmall Signal Switching Diode
Small Signal Switching Diode 2 DESIGN SUPPORT TOOLS click logo to get started 3 FEATURES Silicon epitaxial planar diode Fast switching diode in case SOT-23, especially suited for automatic insertion AEC-Q
More informationAutomotive N-Channel 60 V (D-S) 175 C MOSFET
Automotive N-Channel 6 V (D-S) 75 C MOSFET TO-263 7-Lead D S FEATURES TrenchFET power MOSFET Package with low thermal resistance % R g and UIS tested AEC-Q qualified Material categorization: for definitions
More informationBi-Directional P-Channel MOSFET/Power Switch
Bi-Directional P-Channel MOSFET/Power Switch PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) ± 7 DESCRIPTION.7 at V GS = -.5 V ±.. at V GS = -.5 V ±. The is a low on-resistance p-channel power MOSFET providing
More informationP-Channel 30-V (D-S) MOSFET
Si357BDV P-Channel 3-V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) (A).5 at V GS = - V - 5. - 3. at V GS = -.5 V - 3.7 FEATURES Halogen-free According to IEC 69-- Available TrenchFET Power MOSFETs
More informationDual N-Channel 60 V (D-S) MOSFET
Dual N-Channel 60 V (D-S) MOSFET Si96DL PRODUCT SUMMARY V DS (V) R DS(on) (Ω) MAX. I D (A) Q g (nc) TYP. 60.4 at V GS = 0 V 0.37 3 at V GS = 4.5 V 0.5 D 6 SOT-363 SC-70 Dual (6 leads) S 4 G 5 0.47 FEATURES
More informationP-Channel 40 V (D-S) MOSFET
P-Channel 4 V (-S) MOSFET Si44FY 8 7 6 SO-8 Single 5 FEATURES TrenchFET Gen III p-channel power MOSFET % R g tested Material categorization: for definitions of compliance please see www.vishay.com/doc?9992
More informationLoad Switch with Level-Shift
Si38BDV Load Switch with Level-Shift PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A).8 to 8 DESCRIPTION. at V IN =. V.9. at V IN =. V..7 at V IN =.8 V.7 The Si38BDV includes a p- and n-channel MOSFET in
More informationComplementary N- and P-Channel 20 V (D-S) MOSFET
Complementary N- and P-Channel V (D-S) MOSFET Si6X PRODUCT SUMMARY V DS (V) ( ) I D (ma).7 at V GS =. V 6 N-Channel.8 at V GS =. V. at V GS =.8 V. at V GS = -. V - P-Channel -.6 at V GS = -. V -.7 at V
More informationAutomotive N-Channel 80 V (D-S) 175 C MOSFET
Automotive N-Channel 8 V (D-S) 75 C MOSFET PRODUCT SUMMARY V DS (V) 8 R DS(on) () at V GS = V.3 I D (A) 5 Configuration Single Package PowerPAK 8 x 8L PowerPAK 8 x 8L Single FEATURES TrenchFET power MOSFET
More informationN- and P-Channel 20-V (D-S) MOSFET
N- and P-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) (Ω) I D (A). at V GS =. V. N-Channel. at V GS =. V.. at V GS =. V.. at V GS = -. V -. P-Channel -. at V GS = -. V -.. at V GS = -.V -. FEATURES
More informationAutomotive P-Channel 60 V (D-S) 175 C MOSFET
Automotive P-Channel 6 V (D-S) 75 C MOSFET PRODUCT SUMMARY V DS (V) -6 R DS(on) (Ω) at V GS = - V.93 R DS(on) (Ω) at V GS = -4.5 V.33 I D (A) - Configuration Single TO-22AB FEATURES TrenchFET power MOSFET
More informationAutomotive Dual N-Channel 40 V (D-S) 175 C MOSFET
Automotive Dual N-Channel 4 V (D-S) 75 C MOSFET 6.5 mm mm PowerPAK SO-8L Dual 5.3 mm D 2 D 4 G 2 3 S 2 2 G S FEATURES TrenchFET power MOSFET AEC-Q qualified % R g and UIS tested Material categorization:
More informationN-Channel 100-V (D-S) 175 C MOSFET
N-Channel -V (D-S) 75 C MOSFET SUD4N-25 PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).25 at V GS = V 4.28 at V GS = 4.5 V 38 FEATURES TrenchFET Power MOSFET 75 C Maximum Junction Temperature % R g Tested
More informationDual N-Channel 20 V (D-S) MOSFET
Si9EDH Dual N-Channel V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) SOT-6 SC-7 (6-LEADS).8 at V GS =. V.8.6 at V GS =. V.. at V GS =.8 V. FEATURES Halogen-free According to IEC 69-- Definition
More informationDual N-Channel 20-V (D-S) MOSFET
Si99CDY Dual N-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a Q g (Typ.). at V GS =.5 V. at V GS =.5 V nc SO- FEATURES Halogen-free According to IEC 9-- Definition TrenchFET Power
More informationN-Channel 100 V (D-S) MOSFET
N-Channel V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) () MAX. I D (A) d Q g (TYP.).4 at V GS = V 2.46 at V GS = 7.5 V 2 TO-263 Top View S D G Ordering Information: -GE3 (Lead (Pb)-free and halogen-free)
More informationDual N-Channel 30 V (D-S) MOSFET
Dual N-Channel 3 V (D-S) MOSFET SiA98EDJ PRODUCT SUMMARY V DS (V) R DS(on) () MAX. I D (A) Q g (TYP.) 3 2.5 mm Top View.5 at V GS = 2.5 V 4.5 a 3. nc.58 at V GS = 4.5 V 4.5 a.77 at V GS =.8 V 4.5 a PowerPAK
More informationPower MOSFET FEATURES. Note * Pb containing terminations are not RoHS compliant, exemptions may apply DESCRIPTION. IRFD113PbF SiHFD113-E3
Power MOSFET PRODUCT SUMMARY V DS (V) 60 R DS(on) (Ω) V GS = 10 V 0.8 Q g (Max.) (nc) 7 Q gs (nc) 2 Q gd (nc) 7 Configuration Single D HVMDIP FEATURES For Automatic Insertion Compact Plastic Package End
More informationN-Channel 100 V (D-S) MOSFET
N-Channel V (D-S) MOSFET SUA76E PRODUCT SUMMARY V DS (V) R DS(on) () MAX. I D (A) Q g (TYP.).6 at V GS = V 56.6.7 at V GS = 7.5 V 54.4 53.5 nc Thin-Lead TO-22 FULLPAK FEATURES ThunderFET power MOSFET Q
More informationN-Channel 40 V (D-S) 175 C MOSFET
N-Channel 4 V (D-S) 75 C MOSFET 6.5 mm PRODUCT SUMMARY PowerPAK SO-8L Single Top View 5.3 mm V DS (V) 4 R DS(on) max. ( ) at V GS = V.265 R DS(on) max. ( ) at V GS = 4.5 V.36 Q g typ. (nc) 23 I D (A) a
More informationN-Channel 100 V (D-S) MOSFET
N-Channel V (D-S) MOSFET SUDN-5L-GE PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) Q g (Typ). at V GS = V.5.7.5 at V GS = 4.5 V FEATURES TrenchFET Power MOSFETs Material categorization: For definitions
More informationDual N-Channel 30-V (D-S) MOSFET
Dual N-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).3 at V GS = V 5.9.53 at V GS = 4.5 V 4.9 FEATURES Halogen-free According to IEC 49-- Definition TrenchFET Power MOSFET Compliant
More informationDual P-Channel 20-V (D-S) MOSFET
New Product Dual P-Channel 2-V (D-S) MOSFET Si93CDY PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a, e Q g (Typ.) - 2.92 at V GS = - V - 8.33 at V GS = -.5 V - 8 2 SO-8 S 8 D G 2 7 D FEATURES Halogen-free
More informationN-Channel 150 V (D-S) MOSFET
N-Channel 5 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) Max. I D (A) a Q g (Typ.) 5.232 at V GS = V 36.8.272 at V GS = 7.5 V 34 6. nc PowerPAK SO-8L Single FEATURES ThunderFET technology optimizes
More informationN-Channel 30-V (D-S) MOSFET with Sense Terminal
SUM5N3-3LC N-Channel 3-V (D-S) MOSFET with Sense Terminal PRODUCT SUMMARY V (BR)DSS (V) (Ω) (A).3 at V GS = V 5 a 3.7 at V GS =.5 V 8 a D PAK-5 FEATURES TrenchFET Power MOSFET Plus Current Sensing Diode
More informationAutomotive N-Channel 300 V (D-S) 175 C MOSFET
Automotive N-Channel 300 V (D-S) 175 C MOSFET PRODUCT SUMMARY V DS (V) 300 R DS(on) (Ω) at V GS = V 0.330 I D (A) Configuration Single TO-252 D FEATURES TrenchFET power MOSFET Package with low thermal
More informationAutomotive P-Channel 80 V (D-S) 175 C MOSFET
Automotive P-Channel 8 V (D-S) 175 C MOSFET PRODUCT SUMMARY V DS (V) - 8 R DS(on) () at V GS = - 1 V.25 R DS(on) () at V GS = - 4.5 V.31 I D (A) - 5 Configuration Single FEATURES TrenchFET Power MOSFET
More informationDual P-Channel 20-V (D-S) MOSFET
New Product Dual P-Channel 2-V (D-S) MOSFET Si9933CDY PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a, e Q g (Typ.).58 at V GS = -.5 V - - 2 8.9 at V GS = - 2.5 V - FEATURES Halogen-free Option Available
More informationDual P-Channel 20 V (D-S) MOSFET
Si3CX Dual P-Channel V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) Q g (Typ.).756 at V GS = -.5 V -.35 -.38 at V GS = -.5 V -.35. at V GS = -.8 V -. nc. at V GS = -.5 V -.5 FEATURES Halogen-free
More informationN- and P-Channel 30 V (D-S) MOSFET
N- and P-Channel 3 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) N-Channel 3.47 at V GS = V 6..65 at V GS = 4.5 V 5.2 2.75 P-Channel - 3.89 at V GS = - V - 4.3.4 at V GS = -
More informationDual P-Channel 30-V (D-S) MOSFET
Dual P-Channel 3-V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).25 at V GS = - V - 7. - 3.4 at V GS = - 4.5 V - 5.5 FEATURES Halogen-free According to IEC 6249-2-2 Definition TrenchFET Power
More informationDual P-Channel 12-V (D-S) MOSFET
Dual P-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) Q g (Typ.) -. at V GS = -.5 V -.5 a.5 nc. at V GS = -.5 V -.5 a. at V GS = -.8 V - 3.5 PowerPAK SC-7- Dual FEATURES Halogen-free
More information