LM317, NCV A Adjustable Output, Positive Voltage Regulator
|
|
- Shavonne Lewis
- 5 years ago
- Views:
Transcription
1 , NCV317 A able Output, Positive Voltage Regulator The is an adjustable 3terminal positive voltage regulator capable of supplying in excess of A over an output voltage range of 1.2 V to 37 V. This voltage regulator is exceptionally easy to use and requires only two external resistors to set the output voltage. Further, it employs internal current limiting, thermal shutdown and safe area compensation, making it essentially blowout proof. The serves a wide variety of applications including local, on card regulation. This device can also be used to make a programmable output regulator, or by connecting a fixed resistor between the adjustment and output, the can be used as a precision current regulator. Features Output Current in Excess of A Output able between 1.2 V and 37 V Internal Thermal Overload Protection Internal Short Circuit Current Limiting Constant with Temperature Output Transistor SafeArea Compensation Floating Operation for High Voltage Applications Eliminates Stocking many Fixed Voltages Available in Surface Mount D 2 PAK3, and Standard 3Lead Transistor Package NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECQ1 Qualified and PPAP Capable These are PbFree Devices 1 Pin D 2 PAK3 D2T SUFFIX CASE 936 Heatsink surface (shown as terminal 4 in case outline drawing) is connected to Pin TO22 T SUFFIX CASE 221AB Heatsink surface connected to Pin 2. C in *.1 F I Adj 24 CO ** 1. F ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 1 of this data sheet. DEVICE MARKING INFORMATION See general marking information in the device marking section on page 1 of this data sheet. ** C in is required if regulator is located an appreciable distance from power supply filter. ** C O is not needed for stability, however, it does improve transient response V 1 I Adj Since I Adj is controlled to less than 1 A, the error associated with this term is negligible in most applications. Figure 1. Standard Application Semiconductor Components Industries, LLC, 216 May, 218 Rev Publication Order Number: /D
2 , NCV317 MAXIMUM RATINGS Rating Symbol Value Unit InputOutput Voltage Differential V I V O.3 to 4 Vdc Power Dissipation Case 221A T A = 25 C P D Internally Limited W Thermal Resistance, JunctiontoAmbient JA 65 C/W Thermal Resistance, JunctiontoCase JC 5. C/W Case 936 (D 2 PAK3) T A = 25 C P D Internally Limited W Thermal Resistance, JunctiontoAmbient JA 7 C/W Thermal Resistance, JunctiontoCase JC 5. C/W Operating Junction Temperature Range T J 55 to 15 C Storage Temperature Range T stg 65 to 15 C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. ELECTRICAL CHARACTERISTICS (V I V O = 5. V; I O =.5 A for D2T and T packages; T J = T low to T high (Note 1); I max and P max (Note 2); unless otherwise noted.) Characteristics Figure Symbol Min Typ Max Unit Line Regulation (Note 3), T A = 25 C, 3. V V I V O 4 V 1 Reg line.1.4 %/V Load Regulation (Note 3), T A = 25 C, 1 ma I O I max V O 5. V V O 5. V 2 Reg load Thermal Regulation, T A = 25 C (Note 4), 2 ms Pulse Reg therm.3.7 % V O /W ment Pin Current 3 I Adj 5 1 A ment Pin Current Change, 2.5 V V I V O 4 V, 1, 2 I Adj.2 5. A 1 ma I L I max, P D P max Reference Voltage, 3. V V I V O 4 V, 1 ma I O I max, P D P max 3 V ref V Line Regulation (Note 3), 3. V V I V O 4 V 1 Reg line.2.7 %/V mv % V O Load Regulation (Note 3), 1 ma I O I max V O 5. V V O 5. V 2 Reg load mv % V O Temperature Stability (T low T J T high ) 3 T S.7 % V O Minimum Load Current to Maintain Regulation (V I V O = 4 V) 3 I Lmin ma Maximum Output Current 3 I max A V I V O 15 V, P D P max, T Package V I V O = 4 V, P D P max, T A = 25 C, T Package RMS Noise, % of V O, T A = 25 C, 1 Hz f 1 khz N.3 % V O Ripple Rejection, V O = 1 V, f = 12 Hz (Note 5) 4 RR db C Adj = 1 F Thermal Shutdown (Note 6) 18 C LongTerm Stability, T J = T high (Note 7), T A = 25 C for Endpoint Measurements 3 S.3 1. %/1. khrs. Thermal Resistance JunctiontoCase, T Package R JC 5. C/W 1. T low to T high = to 125 C, for T, D2T. T low to T high = 4 to 125 C, for BT, BD2T, T low to T high = 55 to 15 C, for NCV317BT, BD2T. 2. I max = A, P max = 2 W 3. Load and line regulation are specified at constant junction temperature. Changes in V O due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used. 4. Power dissipation within an IC voltage regulator produces a temperature gradient on the die, affecting individual IC components on the die. These effects can be minimized by proper integrated circuit design and layout techniques. Thermal Regulation is the effect of these temperature gradients on the output voltage and is expressed in percentage of output change per watt of power change in a specified time. 5. C Adj, when used, is connected between the adjustment pin and ground. 6. Thermal characteristics are not subject to production test. 7. Since LongTerm Stability cannot be measured on each device before shipment, this specification is an engineering estimate of average stability from lot to lot. 2
3 , NCV k 6.3 V k k 6.7 k 12 k 5. pf 6.8 k k 6.3 V 6.3 V 3pF 3pF 2.4 k k 5.8 k k 12.5 k 4..1 This device contains 29 active transistors. Figure 2. Representative Schematic Diagram V CC * V IH V IL V V OH OL Line Regulation (% V) V OL x 1 V OH V OL * Pulse testing required. * Duty Cycle * is suggested. C in.1 F I Adj 24 C O 1. F R L Figure 3. Line Regulation and I Adj /Line Test Circuit 3
4 , NCV317 V I C in.1 F I Adj 24 I L C O 1. F * R L (max Load) R L (min Load) V O (min Load) V O (max Load) * Pulse testing required. * Duty Cycle is suggested. V O (min Load) - V O (max Load) Load Regulation (mv) = V O (min Load) - V O (max Load) Load Regulation (% V O ) = x 1 V O (min Load) Figure 4. Load Regulation and I Adj /Load Test Circuit I L V I C in.1 F I Adj 24 V ref C O 1. F R L V O I SET * Pulse testing required. * Duty Cycle is suggested. To Calculate : = I SET 1.25 V To Calculate : Assume I SET = 5.25 ma Figure 5. Standard Test Circuit 24 V 14 V f = 12 Hz 24 D 1 * 1N42 R L = 1 V C in.1 F C O 1. F V O 1.65 k C Adj 1 F * D 1 Discharges C Adj if output is shorted to Ground. Figure 6. Ripple Rejection Test Circuit 4
5 I, NCV Δ, OUTPUT VOLTAGE CHANGE (%) = 15 V = 1 V I L = A I L =.5 A T J, JUNCTION TEMPERATURE ( C) I out, OUTPUT CURRENT (A) C -55 C , INPUT-OUTPUT VOLTAGE DIFFERENTIAL (Vdc) Figure 7. Load Regulation Figure 8. Current Limit 3., ADJUSTMENT PIN CURRENT ( A) Adj μ V ref, REFERENCE VOLTAGE (V) T J, JUNCTION TEMPERATURE ( C) Figure 9. ment Pin Current T J, JUNCTION TEMPERATURE ( C) Vin -Vout, INPUT-OUTPUT VOLTAGE I Lmin, MINIMUM OPERATING CURRENT (ma) DIFFERENTIAL (Vdc) = 1 mv T J, JUNCTION TEMPERATURE ( C) Figure 1. Dropout Voltage T J = -55 C I L = A 25 C 15 C , INPUT-OUTPUT VOLTAGE DIFFERENTIAL (Vdc) 1. A 5 ma 2 ma 2 ma Figure 11. Temperature Stability Figure 12. Minimum Operating Current 5
6 , NCV317 RR, RIPPLE REJECTION (db) = 5 V I L = 5 ma f = 12 Hz C Adj = 1 F , OUTPUT VOLTAGE (V) Figure 13. Ripple Rejection versus Output Voltage RR, RIPPLE REJECTION (db) C Adj = 1 F 4 2 = 15 V = 1 V f = 12 Hz I O, OUTPUT CURRENT (A) Figure 14. Ripple Rejection versus Output Current RR, RIPPLE REJECTION (db) I L = 5 ma = 15 V = 1 V C Adj = 1 F Z O, OUTPUT IMPEDANCE ( ) Ω = 15 V = 1 V I L = 5 ma C Adj = 1 F k 1 k 1 k 1. M 1 M k 1 k 1 k 1. M f, FREQUENCY (Hz) f, FREQUENCY (Hz) Figure 15. Ripple Rejection versus Frequency Figure 16. Output Impedance Δ, INPUT Δ, OUTPUT VOTLAGE CHANGE (V) VOLTAGE DEVIATION (V) = 1 V I L = 5 ma C L = 1. F; C Adj = 1 F C L = ; Δ, OUTPUT VOLTAGE DEVIATION (V) I L, LOAD CURRENT (A) C L = 1. F; C Adj = 1 F C L = ; = 15 V = 1 V I NL = 5 ma I L t, TIME ( s) t, TIME ( s) Figure 17. Line Transient Response Figure 18. Load Transient Response 6
7 , NCV317 APPLICATIONS INFORMATION Basic Circuit Operation The is a 3terminal floating regulator. In operation, the develops and maintains a nominal 1.25 V reference (V ref ) between its output and adjustment terminals. This reference voltage is converted to a programming current (I PROG ) by (see Figure 17), and this constant current flows through to ground. The regulated output voltage is given by: V ref 1 I Adj Since the current from the adjustment terminal (I Adj ) represents an error term in the equation, the was designed to control I Adj to less than 1 A and keep it constant. To do this, all quiescent operating current is returned to the output terminal. This imposes the requirement for a minimum load current. If the load current is less than this minimum, the output voltage will rise. Since the is a floating regulator, it is only the voltage differential across the circuit which is important to performance, and operation at high voltages with respect to ground is possible. V ref I PROG External Capacitors A.1 F disc or 1. F tantalum input bypass capacitor (C in ) is recommended to reduce the sensitivity to input line impedance. The adjustment terminal may be bypassed to ground to improve ripple rejection. This capacitor (C Adj ) prevents ripple from being amplified as the output voltage is increased. A 1 F capacitor should improve ripple rejection about 15 db at 12 Hz in a 1 V application. Although the is stable with no output capacitance, like any feedback circuit, certain values of external capacitance can cause excessive ringing. An output capacitance (C O ) in the form of a 1. F tantalum or 25 F aluminum electrolytic capacitor on the output swamps this effect and insures stability. Protection Diodes When external capacitors are used with any IC regulator it is sometimes necessary to add protection diodes to prevent the capacitors from discharging through low current points into the regulator. Figure 18 shows the with the recommended protection diodes for output voltages in excess of 25 V or high capacitance values (C O > 25 F, C Adj > 1 F). Diode D 1 prevents C O from discharging thru the IC during an input short circuit. Diode D 2 protects against capacitor C Adj discharging through the IC during an output short circuit. The combination of diodes D 1 and D 2 prevents C Adj from discharging through the IC during an input short circuit. D 1 I Adj V ref = 1.25 V Typical Figure 19. Basic Circuit Configuration 1N42 Load Regulation The is capable of providing extremely good load regulation, but a few precautions are needed to obtain maximum performance. For best performance, the programming resistor ( ) should be connected as close to the regulator as possible to minimize line drops which effectively appear in series with the reference, thereby degrading regulation. The ground end of can be returned near the load ground to provide remote ground sensing and improve load regulation. C in C O D2 C Adj 1N42 Figure 2. Voltage Regulator with Protection Diodes 7
8 , NCV317 R θja, THERMAL RESISTANCE JUNCTION TO AIR ( C/W) Free Air Mounted Vertically Minimum Size Pad P D(max) for T A = 5 C R JA L 2. oz. Copper L ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ L, LENGTH OF COPPER (mm) P D, MAXIMUM POWER DISSIPATION (W) Figure 21. D 2 PAK Thermal Resistance and Maximum Power Dissipation versus P.C.B. Copper Length D 6 * 32 V to 4 V 1 (1).1 F 1 * Diodes D 1 and D 2 and transistor Q 2 are added to * allow adjustment of output voltage to V. Current Limit * D 6 protects both 's during an input short circuit. 1N42 1 R SC V I in2 out 2 (2) 1.K Q 1 2N V D 1 1N41 D 2 1N41 5. k Q 2 2N564 2 Voltage 1N41 IN41 24 D 5 IN41 D 3 D 4 1 F 1. F Tantalum Output Range: V O 25 V Output Range: I O A -1 V Figure 22. Laboratory Power Supply with able Current Limit and Output Voltage 8
9 , NCV V 1.25 * To provide current limiting of I O to the system * ground, the source of the FET must be tied to a * negative voltage below V. 1 I out D 1 1N41 D 2 1N41 2N D 1 * 1N42 12 MPS F 1. k TTL Control = V ref I Omax I DSS V O < BV DSS 1.25 V V SS, I Lmin - I DSS < I O < A. As shown < I O < 1. A. V ref I DDS V SS * Minimum = 1.25 V * D 1 protects the device during an input short circuit. Figure 23. able Current Limiter Figure V Electronic Shutdown Regulator I out 24 1N41 5 k I Adj MPS297 1 F I out V ref I Adj 1.25 V 1 ma I out A Figure 25. Slow TurnOn Regulator Figure 26. Current Regulator 9
10 , NCV317 ORDERING INFORMATION BD2TG Device Operating Temperature Range Package Shipping D 2 PAK3 (PbFree) 5 Units / Rail BD2TR4G T J = 4 to 125 C D 2 PAK3 (PbFree) 8 Tape & Reel BTG TO22 (PbFree) 5 Units / Rail D2TG D 2 PAK3 (PbFree) 5 Units / Rail D2TR4G T J = to 125 C D 2 PAK3 (PbFree) 8 Tape & Reel TG TO22 (PbFree) 5 Units / Rail NCV317BD2TG* D 2 PAK3 (PbFree) 5 Units / Rail NCV317BD2TR4G* T J = 55 to 15 C D 2 PAK3 (PbFree) 8 Tape & Reel NCV317BTG* TO22 5 Units / Rail (PbFree) For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD811/D. *NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECQ1 Qualified and PPAP Capable. MARKING DIAGRAMS D 2 PAK3 D2T SUFFIX CASE 936 TO22 T SUFFIX CASE 221A LM 317BD2T AWLYWWG 2 LM 317D2T AWLYWWG 2 NC V317BD2T AWLYWWG 2 LM 317BT AWLYWWG LM 317T AWLYWWG NC V317BT AWLYWWG A WL Y WW G = Assembly Location = Wafer Lot = Year = Work Week = PbFree Package
11 , NCV317 PACKAGE DIMENSIONS D 2 PAK3 D2T SUFFIX CASE 9363 ISSUE E K B J F G R A S H OPTIONAL CHAMFER SIDE VIEW DUAL GAUGE TOP VIEW 2X D.1 (.254) M CONSTRUCTION T N P DETAIL C L M C DETAIL C T SEATING PLANE T ED V TERMINAL 4 U BOTTOM VIEW C OPTIONAL CHAMFER DETAIL C BOTTOM VIEW OPTIONAL CONSTRUCTIONS T ES SIDE VIEW SINGLE GAUGE CONSTRUCTION NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, CONTROLLING DIMENSION: INCHES. 3. TAB CONTOUR OPTIONAL WITHIN DIMENSIONS A AND K. 4. DIMENSIONS U AND V ESTABLISH A MINIMUM MOUNTING SURFACE FOR TERMINAL DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH OR GATE PROTRUSIONS. MOLD FLASH AND GATE PROTRUSIONS NOT TO EXCEED.25 (.635) MAXIMUM. 6. SINGLE GAUGE DESIGN WILL BE SHIPPED AFTER FPCN EXPIRATION IN OCTOBE11. INCHES MILLIMETERS DIM MIN MAX MIN MAX A B C D ED ES F.51 REF REF G.1 BSC 2.54 BSC H J.125 MAX MAX K.5 REF 1.27 REF L M N P R 8 8 S.116 REF REF U.2 MIN 5.8 MIN V.25 MIN 6.35 MIN SOLDERING FOOTPRINT* X X PITCH DIMENSIONS: MILLIMETERS *For additional information on our PbFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. 11
12 , NCV317 PACKAGE DIMENSIONS TO22, SINGLE GAUGE T SUFFIX CASE 221AB ISSUE A B F T S C T SEATING PLANE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, CONTROLLING DIMENSION: INCHES. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. 4. PRODUCT SHIPPED PRIOR TO 28 HAD DIMENSIONS S = INCHES ( MM) INCHES MILLIMETERS DIM MIN MAX MIN MAX A B C D F G H J K L N Q R S T U V Z H Q Z L V G N D A K U R J ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor s product/patent coverage may be accessed at /site/pdf/patentmarking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. Typical parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor E. 32nd Pkwy, Aurora, Colorado 811 USA Phone: or Toll Free USA/Canada Fax: or Toll Free USA/Canada orderlit@onsemi.com N. American Technical Support: Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: ON Semiconductor Website: Order Literature: For additional information, please contact your local Sales Representative /D
LM317, NCV A Adjustable Output, Positive Voltage Regulator
, NCV317 A able Output, Positive Voltage Regulator The is an adjustable 3terminal positive voltage regulator capable of supplying in excess of A over an output voltage range of 1.2 V to 37 V. This voltage
More informationLM A, Adjustable Output, Negative Voltage Regulator THREE TERMINAL ADJUSTABLE NEGATIVE VOLTAGE REGULATOR
1.5 A, able Output, Negative Voltage Regulator The LM337 is an adjustable 3terminal negative voltage regulator capable of supplying in excess of 1.5 A over an output voltage range of 1.2 V to 37 V. This
More informationLM317L. 100 ma Adjustable Output, Positive Voltage Regulator LOW CURRENT THREE TERMINAL ADJUSTABLE POSITIVE VOLTAGE REGULATOR
1 ma able Output, Positive Voltage Regulator The is an adjustable 3terminal positive voltage regulator capable of supplying in excess of 1 ma over an output voltage range of 1.2 V to 37 V. This voltage
More informationLM317M. 500 ma Adjustable Output, Positive Voltage Regulator
5 ma able Output, Positive Voltage Regulator The is an adjustable threeterminal positive voltage regulator capable of supplying in excess of 5 ma over an output voltage range of 1.2 V to 37 V. This voltage
More informationNCP A, Low Dropout Linear Regulator with Enhanced ESD Protection
3.0 A, Low Dropout Linear Regulator with Enhanced ESD Protection The NCP5667 is a high performance, low dropout linear regulator designed for high power applications that require up to 3.0 A current. A
More informationNCP5504, NCV ma Dual Output Low Dropout Linear Regulator
25 ma Dual Output Low Dropout Linear Regulator The NCP554/NCV554 are dual output low dropout linear regulators with 2.% accuracy over the operating temperature range. They feature a fixed output voltage
More informationNCP59302, NCV A, Very Low-Dropout (VLDO) Fast Transient Response Regulator series
NCP5932, NCV5932 3. A, Very Low-Dropout (VLDO) Fast Transient Response Regulator series The NCP5932 is a high precision, very low dropout (VLDO), low ground current positive voltage regulator that is capable
More informationNCP57302, NCV A, Very Low-Dropout (VLDO) Fast Transient Response Regulator
NCP5732, NC5732 3. A, ery Low-Dropout (LDO) Fast Transient Response Regulator The NCP5732 is a high precision, very low dropout (LDO), low minimum input voltage and low ground current positive voltage
More informationMC79L00A Series. 100 ma Negative Voltage Regulators THREE TERMINAL LOW CURRENT NEGATIVE FIXED VOLTAGE REGULATORS
00 Negative Voltage Regulators The negative voltage regulators are inexpensive, easytouse devices suitable for numerous applications requiring up to 00. Like the higher powered MC7900 Series negative regulators,
More informationLM337MT MEDIUM CURRENT THREE TERMINAL ADJUSTABLE NEGATIVE VOLTAGE REGULATOR
Order this document by /D The is an adjustable threeterminal negative voltage regulator capable of supplying in excess of 5 ma over an output voltage range of 1.2 V to 37 V. This voltage regulator is exceptionally
More informationNCP A Linear Voltage Regulator with Soft Start
3. A Linear Voltage Regulator with SoftStart The NCP63 is a low dropout positive voltage regulator that is capable of providing a guaranteed output current of 3. A with a maximum dropout voltage of. V
More informationMUN2214, MMUN2214L, MUN5214, DTC114YE, DTC114YM3, NSBC114YF3. Digital Transistors (BRT) R1 = 10 k, R2 = 47 k
MUN224, MMUN224L, MUN524, DTC4YE, DTC4YM, NSBC4YF Digital Transistors (BRT) R = 0 k, R2 = 47 k NPN Transistors with Monolithic Bias Resistor Network This series of digital transistors is designed to replace
More informationNCP A Low Dropout Linear Regulator
1.5 A Low Dropout Linear Regulator The NCP566 low dropout linear regulator will provide 1.5 A at a fixed output voltage. The fast loop response and low dropout voltage make this regulator ideal for applications
More informationNTMFD4C20N. Dual N-Channel Power MOSFET. 30 V, High Side 18 A / Low Side 27 A, Dual N Channel SO8FL
NTMFDCN Dual N-Channel Power MOSFET 3 V, High Side A / Low Side 7 A, Dual N Channel SOFL Features Co Packaged Power Stage Solution to Minimize Board Space Minimized Parasitic Inductances Optimized Devices
More informationCS5205A A Adjustable Linear Regulator
5.0 A Adjustable Linear Regulator The linear regulator provides 5.0 A at an adjustable voltage with an accuracy of ±1%. Two external resistors are used to set the output voltage within a 1.25 V to 13 V
More informationMUN2213, MMUN2213L, MUN5213, DTC144EE, DTC144EM3, NSBC144EF3. Digital Transistors (BRT) R1 = 47 k, R2 = 47 k
MUN22, MMUN22L, MUN52, DTC44EE, DTC44EM, NSBC44EF Digital Transistors (BRT) R = 47 k, R2 = 47 k NPN Transistors with Monolithic Bias Resistor Network This series of digital transistors is designed to replace
More informationMJD340, NJVMJD340T4G (NPN), MJD350, NJVMJD350T4G (PNP) High Voltage Power Transistors
MJD4, NJMJD4T4G (NPN), MJD, NJMJDT4G (PNP) High oltage Power Transistors for Surface Mount Applications Designed for line operated audio output amplifier, switchmode power supply drivers and other switching
More informationNCS2005. Operational Amplifier, Low Power, 8 MHz GBW, Rail-to-Rail Input-Output
Operational Amplifier, Low Power, 8 MHz GBW, Rail-to-Rail Input-Output The provides high performance in a wide range of applications. The offers beyond rail to rail input range, full rail to rail output
More informationMUN2132, MMUN2132L, MUN5132, DTA143EE, DTA143EM3, NSBA143EF3. Digital Transistors (BRT) R1 = 4.7 k, R2 = 4.7 k
MUN, MMUNL, MUN5, DTA4EE, DTA4EM, NSBA4EF Digital Transistors (BRT) R = 4.7 k, R = 4.7 k PNP Transistors with Monolithic Bias Resistor Network This series of digital transistors is designed to replace
More informationMJD31 (NPN), MJD32 (PNP) Complementary Power Transistors. DPAK For Surface Mount Applications
MJD3 (NPN), MJD3 (PNP) Complementary Power Transistors For Surface Mount Applications Designed for general purpose amplifier and low speed switching applications. Features Lead Formed for Surface Mount
More informationMMBT2222AWT1G SMMBT2222AWT1G. General Purpose Transistor. NPN Silicon
MMBT2222AWTG, SMMBT2222AWTG General Purpose Transistor NPN Silicon These transistors are designed for general purpose amplifier applications. They are housed in the SOT323/SC7 package which is designed
More informationBC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L. General Purpose Transistors. NPN Silicon
BC87-6L, SBC87-6L, BC87-25L, SBC87-25L, BC87-4L, SBC87-4L General Purpose Transistors NPN Silicon Features S and NSV Prefixes for Automotive and Other Applications Requiring Unique Site and Control Change
More informationNCV8505 Series. Micropower 400 ma LDO Linear Regulators with ENABLE, DELAY, and RESET
NC8505 Series Micropower 400 ma LDO Linear Regulators with ENABLE, DELAY, and RESET The NC8505 is a family of precision micropower voltage regulators. Their output current capability is 400 ma. The family
More informationNCV4264-2C. Low I Q Low Dropout Linear Regulator
NCV464-C Low I Q Low Dropout Linear Regulator The NCV464 C is a low quiescent current consumption LDO regulator. Its output stage supplies ma with ±.% output voltage accuracy. Maximum dropout voltage is
More informationNTD5865NL. N-Channel Power MOSFET 60 V, 46 A, 16 m
N-Channel Power MOSFET 6 V, 6 A, 6 m Features Low Gate Charge Fast Switching High Current Capability % Avalanche Tested These Devices are Pb Free, Halogen Free and are RoHS Compliant MAXIMUM RATINGS (
More informationNVLJD4007NZTBG. Small Signal MOSFET. 30 V, 245 ma, Dual, N Channel, Gate ESD Protection, 2x2 WDFN Package
NVLJD7NZ Small Signal MOSFET V, 2 ma, Dual, N Channel, Gate ESD Protection, 2x2 WDFN Package Features Optimized Layout for Excellent High Speed Signal Integrity Low Gate Charge for Fast Switching Small
More informationNSVEMD4DXV6T5G. Dual Bias Resistor Transistors. NPN and PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network
Dual Bias Resistor Transistors NPN and PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias
More informationNCP553, NCV ma CMOS Low Iq NOCAP Voltage Regulator
NCP55, NCV55 8 ma CMOS Low Iq NOCAP Voltage Regulator This series of fixed output NOCAP linear regulators are designed for handheld communication equipment and portable battery powered applications which
More informationMJD2955, NJVMJD2955T4G (PNP) MJD3055, NJVMJD3055T4G (NPN) Complementary Power Transistors DPAK For Surface Mount Applications
MJD9, NJVMJD9T4G (PNP) MJD3, NJVMJD3T4G (NPN) Complementary Power Transistors For Surface Mount Applications Designed for general purpose amplifier and low speed switching applications. Features Lead Formed
More informationNCP ma, 10 V, Low Dropout Regulator
15 ma, 1 V, Low Dropout Regulator The is a CMOS Linear voltage regulator with 15 ma output current capability. The device is capable of operating with input voltages up to 1 V, with high output voltage
More informationMJD44H11 (NPN) MJD45H11 (PNP) Complementary Power Transistors. DPAK For Surface Mount Applications
MJDH (NPN) MJD5H (PNP) Complementary Power Transistors For Surface Mount Applications Designed for general purpose power and switching such as output or driver stages in applications such as switching
More informationNTTFS3A08PZTWG. Power MOSFET 20 V, 15 A, Single P Channel, 8FL
NTTFS3A8PZ Power MOSFET V, 5 A, Single P Channel, 8FL Features Ultra Low R DS(on) to Minimize Conduction Losses 8FL 3.3 x 3.3 x.8 mm for Space Saving and Excellent Thermal Conduction ESD Protection Level
More informationNCV8440, NCV8440A. Protected Power MOSFET. 2.6 A, 52 V, N Channel, Logic Level, Clamped MOSFET w/ ESD Protection
Protected Power MOSFET 2.6 A, 52 V, N Channel, Logic Level, Clamped MOSFET w/ ESD Protection Features Diode Clamp Between Gate and Source ESD Protection Human Body Model 5 V Active Over Voltage Gate to
More informationLM350 THREE TERMINAL ADJUSTABLE POSITIVE VOLTAGE REGULATOR
Order this document by /D The is an adjustable threeterminal positive voltage regulator capable of supplying in excess of 3. A over an output voltage range of 1.2 V to 33 V. This voltage regulator is exceptionally
More informationNDD60N360U1 35G. N-Channel Power MOSFET. 100% Avalanche Tested These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant.
NDDN3U N-Channel Power MOSFET V, 3 m Features % Avalanche Tested These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant ABSOLUTE MAXIMUM RATINGS ( unless otherwise noted) V (BR)DSS R DS(ON)
More informationEMC2DXV5T1G, EMC3DXV5T1G, EMC4DXV5T1G, EMC5DXV5T1G. Dual Common Base-Collector Bias Resistor Transistors
EMCDXV5TG, EMCDXV5TG, EMCDXV5TG, EMC5DXV5TG Dual Common Base-Collector Bias Resistor Transistors NPN and PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network The BRT (Bias Resistor
More informationNTGD4167C. Power MOSFET Complementary, 30 V, +2.9/ 2.2 A, TSOP 6 Dual
Power MOSFET Complementary, 3 V, +.9/. A, TSOP 6 Dual Features Complementary N Channel and P Channel MOSFET Small Size (3 x 3 mm) Dual TSOP 6 Package Leading Edge Trench Technology for Low On Resistance
More informationBC857BTT1G. General Purpose Transistor. PNP Silicon
General Purpose Transistor PNP Silicon These transistors are designed for general purpose amplifier applications. They are housed in the SOT46/SC75 which is designed for low power surface mount applications.
More informationBC846ALT1G Series. General Purpose Transistors. NPN Silicon
BC846ALTG Series General Purpose Transistors NPN Silicon Features Moisture Sensitivity Level: ESD Rating Human Body Model: > 4 V ESD Rating Machine Model: > 4 V S and NSV Prefix for Automotive and Other
More informationNVD5117PLT4G. Power MOSFET 60 V, 16 m, 61 A, Single P Channel
Power MOSFET 6 V, 16 m, 61 A, Single P Channel Features Low R DS(on) to Minimize Conduction Losses High Current Capability Avalanche Energy Specified AEC Q11 Qualified These Devices are Pb Free, Halogen
More informationMAXIMUM RATINGS (T A = 25 C, unless otherwise noted.) STANDARD APPLICATION
These voltage regulators are monolithic integrated circuits designed as fixedvoltage regulators for a wide variety of applications including local, oncard regulation. These regulators employ internal current
More informationNTNS3164NZT5G. Small Signal MOSFET. 20 V, 361 ma, Single N Channel, SOT 883 (XDFN3) 1.0 x 0.6 x 0.4 mm Package
NTNS36NZ Small Signal MOSFET V, 36 ma, Single N Channel, SOT 883 (XDFN3). x.6 x. mm Package Features Single N Channel MOSFET Ultra Low Profile SOT 883 (XDFN3). x.6 x. mm for Extremely Thin Environments
More informationIs Now Part of. To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
More informationMJD6039, NJVMJD6039T4G. Darlington Power Transistors. DPAK For Surface Mount Applications SILICON POWER TRANSISTORS 4 AMPERES, 80 VOLTS, 20 WATTS
Darlington Power Transistors For Surface Mount Applications Designed for general purpose power and switching such as output or driver stages in applications such as switching regulators, convertors, and
More informationDual N-Channel, Digital FET
FDG6301N-F085 Dual N-Channel, Digital FET Features 25 V, 0.22 A continuous, 0.65 A peak. R DS(ON) = 4 @ V GS = 4.5 V, R DS(ON) = 5 @ V GS = 2.7 V. Very low level gate drive requirements allowing directoperation
More informationMJD41C (NPN), MJD42C (PNP) Complementary Power Transistors. DPAK for Surface Mount Applications
MJDC (NPN), MJDC (PNP) Complementary Power Transistors for Surface Mount Applications Designed for general purpose amplifier and low speed switching applications. Features Lead Formed for Surface Mount
More informationNVMFD5C478NL. Power MOSFET. 40 V, 14.5 m, 29 A, Dual N Channel
NVMFDC478NL Power MOSFET 4 V, 4. m, 29 A, Dual N Channel Features Small Footprint ( x 6 mm) for Compact Design Low R DS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses NVMFDC478NLWF
More informationNTTFS5116PLTWG. Power MOSFET 60 V, 20 A, 52 m. Low R DS(on) Fast Switching These Devices are Pb Free and are RoHS Compliant
Power MOSFET 6 V, 2 A, 52 m Features Low R DS(on) Fast Switching These Devices are Pb Free and are RoHS Compliant Applications Load Switches DC Motor Control DC DC Conversion MAXIMUM RATINGS ( unless otherwise
More informationSNSS35200MR6T1G. 35 V, 5 A, Low V CE(sat) PNP Transistor. 35 VOLTS 5.0 AMPS PNP LOW V CE(sat) TRANSISTOR EQUIVALENT R DS(on) 100 m
35 V, 5 A, Low V CE(sat) PNP Transistor ON Semiconductor s e 2 PowerEdge family of low V CE(sat) transistors are miniature surface mount devices featuring ultra low saturation voltage (V CE(sat) ) and
More informationNCV1009ZG. 2.5 Volt Reference
V9 2.5 Volt Reference The V9 is a precision trimmed 2.5 V ±5. mv shunt regulator diode. The low dynamic impedance and wide operating current range enhances its versatility. The tight reference tolerance
More informationNSV1C301ET4G. 100 V, 3.0 A, Low V CE(sat) NPN Transistor. 100 VOLTS, 3.0 AMPS 12.5 WATTS NPN LOW V CE(sat) TRANSISTOR
NSSC3ET4G, 3. A, Low CE(sat) NPN Transistor ON Semiconductor s e 2 PowerEdge family of low CE(sat) transistors are surface mount devices featuring ultra low saturation voltage ( CE(sat) ) and high current
More informationNTTFS5820NLTWG. Power MOSFET. 60 V, 37 A, 11.5 m. Low R DS(on) Low Capacitance Optimized Gate Charge These Devices are Pb Free and are RoHS Compliant
NTTFS582NL Power MOSFET 6 V, 37 A,.5 m Features Low R DS(on) Low Capacitance Optimized Gate Charge These Devices are Pb Free and are RoHS Compliant MAXIMUM RATINGS ( unless otherwise stated) Parameter
More informationPCS2I2309NZ. 3.3 V 1:9 Clock Buffer
. V 1:9 Clock Buffer Functional Description PCS2I209NZ is a low cost high speed buffer designed to accept one clock input and distribute up to nine clocks in mobile PC systems and desktop PC systems. The
More informationNTD5867NL. N-Channel Power MOSFET 60 V, 20 A, 39 m
N-Channel Power MOSFET 6 V, A, 39 m Features Low R DS(on) High Current Capability % Avalanche Tested These Devices are Pb Free, Halogen Free/BFR Free and are RoHS Compliant MAXIMUM RATINGS ( unless otherwise
More informationNGB18N40CLB, NGB18N40ACLB. Ignition IGBT 18 Amps, 400 Volts. N Channel D 2 PAK. 18 AMPS, 400 VOLTS V CE(on) 2.0 I C = 10 A, V GE 4.
NGB8N4CLB, NGB8N4ACLB Ignition IGBT 8 Amps, 4 Volts N Channel D PAK This Logic Level Insulated Gate Bipolar Transistor (IGBT) features monolithic circuitry integrating ESD and Over Voltage clamped protection
More informationCS8183. Dual Micropower 200 ma Low Dropout Tracking Regulator/Line Driver
Dual Micropower ma Low Dropout Tracking Regulator/Line Driver The is a dual low dropout tracking regulator designed to provide adjustable buffered output voltages that closely track (±1 mv) the reference
More informationNSS40301MDR2G. 40 VOLTS 6.0 AMPS NPN LOW V CE(sat) TRANSISTOR EQUIVALENT R DS(on) 44 m
NSS3MDR2G Dual Matched V, 6. A, Low V CE(sat) NPN Transistor These transistors are part of the ON Semiconductor e 2 PowerEdge family of Low V CE(sat) transistors. They are assembled to create a pair of
More informationNCV ma Micropower Precision Voltage Reference
NCV51 ma Micropower Precision Voltage Reference The NCV51 is a high performance, low power precision voltage reference. This device combines very high accuracy, low power dissipation and small package
More informationBAV ma 70 V High Conductance Ultra-Fast Switching Diode
BAV99 200 ma 70 V High Conductance Ultra-Fast Switching Diode Features High Conductance: I F = 200 ma Fast Switching Speed: t rr < 6 ns Maximum Small Plastic SOT-2 Package Series-Pair Configuration Applications
More informationNCV4266-2C 150 ma Low I q, Low-Dropout Voltage Regulator with Enable
NCV266-2C 5 ma Low I q, Low-Dropout Voltage Regulator with Enable The NCV266 2C is a 5 ma output current integrated low dropout, low quiescent current regulator family designed for use in harsh automotive
More informationMUN5332DW1, NSBC143EPDXV6, NSBC143EPDP6. Complementary Bias Resistor Transistors R1 = 4.7 k, R2 = 4.7 k
MUN5DW, NSBCEPDXV6, NSBCEPDP6 Complementary Bias Resistor Transistors R =.7 k, R =.7 k NPN and PNP Transistors with Monolithic Bias Resistor Network () PIN CONNECTIONS () () This series of digital transistors
More informationFGH75T65SQDNL4. 75 A, 650 V V CEsat = 1.50 V E on = 1.25 mj
IGBT - Field Stop IV/ Lead This Insulated Gate Bipolar Transistor (IGBT) features a robust and cost effective Field Stop IV Trench construction, and provides superior performance in demanding switching
More informationNTD5805N, NVD5805N. Power MOSFET 40 V, 51 A, Single N Channel, DPAK
NTD585N, NVD585N Power MOSFET V, 5 A, Single N Channel, Features Low R DS(on) High Current Capability Avalanche Energy Specified NVD Prefix for Automotive and Other Applications Requiring Unique Site and
More informationMBR20200CT. Switch mode Power Rectifier. Dual Schottky Rectifier SCHOTTKY BARRIER RECTIFIER 20 AMPERES, 200 VOLTS
MBRCT Switch mode Power Rectifier Dual Schottky Rectifier Features and Benefits Low Forward Voltage Low Power Loss/High Efficiency High Surge Capacity 75 C Operating Junction Temperature A Total ( A Per
More informationNCP786L. Wide Input Voltage Range 5 ma Ultra-Low Iq, High PSRR Linear Regulator with Adjustable Output Voltage
Wide Input Voltage Range 5 ma Ultra-Low Iq, High PSRR Linear Regulator with Adjustable Output Voltage The is high performance linear regulator, offering a very wide operating input voltage range of up
More informationNTK3139P. Power MOSFET. 20 V, 780 ma, Single P Channel with ESD Protection, SOT 723
NTK9P Power MOSFET V, 78 ma, Single P Channel with ESD Protection, SOT 7 Features P channel Switch with Low R DS(on) % Smaller Footprint and 8% Thinner than SC 89 Low Threshold Levels Allowing.5 V R DS(on)
More informationExtended V GSS range ( 25V) for battery applications
Dual Volt P-Channel PowerTrench MOSFET General Description This P-Channel MOSFET has been designed specifically to improve the overall efficiency of DC/DC converters using either synchronous or conventional
More informationNTMS5835NL. Power MOSFET 40 V, 12 A, 10 m
Power MOSFET V, 2 A, m Features Low R DS(on) Low Capacitance Optimized Gate Charge These Devices are Pb Free, Halogen Free/BFR Free and are RoHS Compliant MAXIMUM RATINGS ( unless otherwise stated) Parameter
More informationNTS4173PT1G. Power MOSFET. 30 V, 1.3 A, Single P Channel, SC 70
NTS17P Power MOSFET V, 1. A, Single P Channel, SC 7 Features V BV ds, Low R DS(on) in SC 7 Package Low Threshold Voltage Fast Switching Speed This is a Halide Free Device This is a Pb Free Device Applications
More informationNVD5865NL. Power MOSFET 60 V, 46 A, 16 m, Single N Channel
Power MOSFET 6 V, 6 A, 16 m, Single N Channel Features Low R DS(on) to Minimize Conduction Losses High Current Capability Avalanche Energy Specified AEC Q1 Qualified These Devices are Pb Free, Halogen
More informationP-Channel PowerTrench MOSFET
FDD4685-F085 P-Channel PowerTrench MOSFET -40 V, -32 A, 35 mω Features Typical R DS(on) = 23 m at V GS = -10V, I D = -8.4 A Typical R DS(on) = 30 m at V GS = -4.5V, I D = -7 A Typical Q g(tot) = 19 nc
More informationNTMS5838NL. Power MOSFET 40 V, 7.5 A, 20 m
Power MOSFET V, 7.5 A, 2 m Features Low R DS(on) Low Capacitance Optimized Gate Charge These Devices are Pb Free, Halogen Free/BFR Free and are RoHS Compliant MAXIMUM RATINGS ( unless otherwise stated)
More informationMUN5216DW1, NSBC143TDXV6. Dual NPN Bias Resistor Transistors R1 = 4.7 k, R2 = k. NPN Transistors with Monolithic Bias Resistor Network
MUN526DW, NSBC43TDXV6 Dual NPN Bias Resistor Transistors R = 4.7 k, R2 = k NPN Transistors with Monolithic Bias Resistor Network This series of digital transistors is designed to replace a single device
More informationNCP694. 1A CMOS Low-Dropout Voltage Regulator
A CMOS Low-Dropout Voltage Regulator The NCP694 series of fixed output super low dropout linear regulators are designed for portable battery powered applications with high output current requirement up
More informationPIN CONNECTIONS MAXIMUM RATINGS (T J = 25 C unless otherwise noted) SC 75 (3 Leads) Parameter Symbol Value Unit Drain to Source Voltage V DSS 30 V
NTA7N, NVTA7N Small Signal MOSFET V, 4 ma, Single, N Channel, Gate ESD Protection, SC 7 Features Low Gate Charge for Fast Switching Small.6 x.6 mm Footprint ESD Protected Gate NV Prefix for Automotive
More informationMJD31, MJD31C (NPN), MJD32, MJD32C (PNP) Complementary Power Transistors. DPAK For Surface Mount Applications
MJD, MJDC (NPN), MJD, MJDC (PNP) Complementary Power Transistors For Surface Mount Applications Designed for general purpose amplifier and low speed switching applications. Features Lead Formed for Surface
More informationMUN5311DW1T1G Series.
MUNDWTG Series Preferred Devices Dual Bias Resistor Transistors NPN and PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network The Bias Resistor Transistor (BRT) contains a single
More informationNTGS3441BT1G. Power MOSFET. -20 V, -3.5 A, Single P-Channel, TSOP-6. Low R DS(on) in TSOP-6 Package 2.5 V Gate Rating This is a Pb-Free Device
Power MOSFET - V, -. A, Single P-Channel, TSOP- Features Low R DS(on) in TSOP- Package. V Gate Rating This is a Pb-Free Device Applications Battery Switch and Load Management Applications in Portable Equipment
More informationNVTFS4C13N. Power MOSFET. 30 V, 9.4 m, 40 A, Single N Channel, 8FL Features
NVTFS4C3N Power MOSFET 3 V, 9.4 m, 4 A, Single N Channel, 8FL Features Low R DS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses
More informationNTGS3443, NVGS3443. Power MOSFET 4.4 Amps, 20 Volts. P Channel TSOP AMPERES 20 VOLTS R DS(on) = 65 m
NTGS, NVGS Power MOSFET., Volts PChannel TSOP Features Ultra Low R DS(on) Higher Efficiency Extending Battery Life Miniature TSOP Surface Mount Package These Devices are PbFree and are RoHS Compliant NVGS
More informationNTK3043N. Power MOSFET. 20 V, 285 ma, N Channel with ESD Protection, SOT 723
NTKN Power MOSFET V, 8 ma, N Channel with ESD Protection, SOT 7 Features Enables High Density PCB Manufacturing % Smaller Footprint than SC 89 and 8% Thinner than SC 89 Low Voltage Drive Makes this Device
More informationMMBTA05L, MMBTA06L. Driver Transistors. NPN Silicon
Driver Transistors NPN Silicon Features S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECQ0 Qualified and PPAP Capable These Devices are
More informationNCV4264-2C. Linear Regulator, Low Dropout, Low I Q
NCV4264-2C Linear Regulator, Low Dropout, Low I Q The NCV4264 2C is a low quiescent current consumption LDO regulator. Its output stage supplies ma with ±2.% output voltage accuracy. Maximum dropout voltage
More informationBD809 (NPN), BD810 (PNP) Plastic High Power Silicon Transistor 10 AMPERE POWER TRANSISTORS 80 VOLTS 90 WATTS
BD89 (NPN), BD8 (PNP) Plastic High Power Silicon Transistor These devices are designed for use in high power audio amplifiers utilizing complementary or quasi complementary circuits. Features DC Current
More informationMCR8DSM, MCR8DSN. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 8 AMPERES RMS VOLTS
Preferred Device Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed for high volume, low cost, industrial and consumer applications such as motor control; process control;
More informationNCP A Adjustable and 3.3 V Fixed Output Linear Regulator
1.5 A Adjustable and 3.3 V Fixed Output Linear Regulator The NCP186 linear regulator provides 1.5 A at 3.3 V or adjustable output voltage. The adjustable output voltage device uses two external resistors
More informationMUN5211DW1T1 Series. NPN Silicon Surface Mount Transistors with Monolithic Bias Resistor Network
MUNDWT Series Preferred Devices Dual Bias Resistor Transistors NPN Silicon Surface Mount Transistors with Monolithic Bias Resistor Network The BRT (Bias Resistor Transistor) contains a single transistor
More informationNDF10N60Z. N-Channel Power MOSFET 600 V, 0.75
NDFNZ N-Channel Power MOSFET V,.7 Features Low ON Resistance Low Gate Charge ESD Diode Protected Gate % Avalanche Tested % R g Tested These Devices are Pb Free, Halogen Free/BFR Free and are RoHS Compliant
More informationNTA4153N, NTE4153N, NVA4153N, NVE4153N. Small Signal MOSFET. 20 V, 915 ma, Single N Channel with ESD Protection, SC 75 and SC 89
NTA45N, NTE45N, NVA45N, NVE45N Small Signal MOSFET V, 95 ma, Single N Channel with ESD Protection, SC 75 and SC 89 Features Low R DS(on) Improving System Efficiency Low Threshold Voltage,.5 V Rated ESD
More informationMJD122 (NPN) MJD127 (PNP) Complementary Darlington Power Transistor. DPAK For Surface Mount Applications
MJD () MJD7 () Complementary Darlington Power Transistor For Surface Mount Applications Designed for general purpose amplifier and low speed switching applications. Features Lead Formed for Surface Mount
More informationNCP ma, Wide Input Voltage Range, Low Dropout Regulator
5 ma, Wide Input Voltage Range, Low Dropout Regulator The NCP4623 is a CMOS Linear Voltage Regulator designed for wide input voltage range. The maximum operating input voltage is up to 24 V with a minimum
More informationBYV SWITCHMODE Power Rectifier. ULTRAFAST RECTIFIER 16 AMPERES, 200 VOLTS t rr = 35 ns
BYV32-0 SWITCHMODE Power Rectifier Features and Benefits Low Forward Voltage Low Power Loss/High Efficiency High Surge Capacity 175 C Operating Junction Temperature A Total (8 A Per Diode Leg) PbFree Packages
More informationMC3488A. Dual EIA 423/EIA 232D Line Driver
Dual EIA423/EIA232D Line Driver The MC34A dual is singleended line driver has been designed to satisfy the requirements of EIA standards EIA423 and EIA232D, as well as CCITT X.26, X.2 and Federal Standard
More informationMRA4003T3G Series, NRVA4003T3G Series. Surface Mount Standard Recovery Power Rectifier. SMA Power Surface Mount Package
MRA43T3G Series, NRVA43T3G Series Surface Mount Standard Recovery Power Rectifier Power Surface Mount Package Features construction with glass passivation. Ideally suited for surface mounted automotive
More informationMJD44H11 (NPN) MJD45H11 (PNP)
MJDH (NPN) MJD5H (PNP) Preferred Device Complementary Power Transistors For Surface Mount Applications Designed for general purpose power and switching such as output or driver stages in applications such
More informationMMUN2111LT1G, SMMUN21xxLT3G. NSVMMUN2111LT1G Series. Bias Resistor Transistors
MMUNLTG, SMMUNLTG, NSVMMUNLTG Series Bias Resistor Transistors PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace
More informationNB3N502/D. 14 MHz to 190 MHz PLL Clock Multiplier
4 MHz to 90 MHz PLL Clock Multiplier Description The NB3N502 is a clock multiplier device that generates a low jitter, TTL/CMOS level output clock which is a precise multiple of the external input reference
More informationNJVMJD128T4G. NJVMJD128T4G (PNP) Complementary Darlington Power Transistor. DPAK For Surface Mount Applications
MJD8TG, NJVMJD8TG (PNP) Complementary Darlington Power Transistor For Surface Mount Applications Designed for general purpose amplifier and low speed switching applications. Features Monolithic Construction
More informationNCV8774. Ultra Low I q 350 ma LDO Regulator
Ultra Low I q 35 ma LDO Regulator The NCV8774 is a 35 ma LDO regulator. Its robustness allows NCV8774 to be used in severe automotive environments. Ultra low quiescent current as low as 18 A typical makes
More informationFDN335N N-Channel 2.5V Specified PowerTrench TM MOSFET
N-Channel.5V Specified PowerTrench TM MOSFET General Description This N-Channel.5V specified MOSFET is produced using ON Semiconductor's advanced PowerTrench process that has been especially tailored to
More information