SERIES YL-N DIVIDERS/COMBINER, POWER IN-PHASE 2-WAY SMA & TYPE N GHz ELECTRICAL PERFORMANCE MECHANICAL OUTLINES GENERAL SPECIFICATIONS

Transcription

1 IN-PHASE 2-WAY & TYPE N DIVIDERS/COMBINER, POWER GHz GENERAL SPECIFICATIONS RF Impedance: GHz 50 Ohms The power handling capability for load VSWR s less than 1 is 1 watt CW and 1kW peak for frequencies up to 2.0 GHz, and 400 mw CW and 0.4 kw peak for frequencies from 2.0 GHz to 18.0 GHz. 55 C to +85 C or Female SERIES YL ELECTRICAL PERFORMANCE Frequency Maximum Maximum Minimum Phase Amplitude Outline Range In/Out Insertion Isolation Balance Balance Fig. 1, 2 Fig. 2, 3 Model No.* GHz VSWR Loss db db Degrees db YL-70 YL-70N / ** YL-23 YL-23N / YL-71 YL-71N / YL-25 YL-25N / YL-33 YL-33N / YL-48 YL-48N / YL-74 N/A / N/A YL-90 YL-90N / YL-92 N/A / N/A * Units with connectors: up to 4GHz multiply VSWR s by 1.05 and subtract 2 db from isolation. Above 4GHz multiply VSWR s by 1.10 and subtract 3dB from isolation. ** Greater than 30 db over most of the frequency band. [9,7] [9,7] FEMALE B B/2 E 0.10[2,5] FIGURE 1 A/2 IN OUT OUT C A SERIES YL 0.093[2,36] DIA. THRU 2 MOUNTING HOLES MECHANICAL OUTLINES Out- A B C D E Line in[mm] in[mm] in[mm] in[mm] in[mm] [21,6] 0.82[20,83] 0.650[16,51] 0[9,65] 0.20[5,1] [21,6] [16,51] 0.30[7,6] 0.20[5,1] [21,6] 0.650[16,51] [5,1] 4 1[44,45] 0.800[20,3] 0.88[22,35] 0.20[5,1] [20,3] 1[31,75] [5,1] [33,02] 1[44,45] 1.100[27,94] 0.88[22,35] 0.20[5,1] [38,86] 10[44,45] [5,1] [43,94 10[44,45] 0.70[17,8] [36,8] 10[44,45] 0.88[22,35] [29,21] 10[44,45] [3,3] B 0 FIGURE 2 OUT C IN A OUT A/2 B/ [3,18]DIA. THRU 2 MOUNTINGHOLES 0.74[18,8] SERIES YL-N N FEMALE sales@mcekdi-integrated.com See us on the

2 2 WAY DIVIDER/COMBINER, POWER D357MS MHz 3.30 db Maximum, 3.10 db Typical 22.0 db Minimum ±1 Maximum VSWR Input: 1.20:1 Typical Output: 1.35:1 Typical 30 to +70 C Note: As a combiner input power is 2 watts maximum per port. Each input port is able to handle 5 watts if proper heat sink is used [68,07] [60,45] 1.34 [34,04] S D357MS MATES WITH TYPE `` MALE CONNECTOR PER MIL-C PLCS JI 6[39,62] DIA. THRU 2 HOLES 1.78 [45,21] [9,7] D392HS MHz 0.2 db Maximum 1.2:1 Maximum 22 db Minimum ±1 Maximum 1 W at each of the combined ports Third Ord Incp: +40 dbm Minimum OperatingTemperature: 30 to +70 C.22 [5,59] M3x 0.5-6H, 4mm MIN DP FARSIDE 1.18[29,97].81 [20,57] D392HS MATES WITH ""MALE 1.26 [32,0].48 [12,19].65 [16,5].31 [7,87].02[0,51] FINISH BUILD UP 1.62[41,15] D313MS GHz 1:1 Maximum -J3 -J3 3.5 db Maximum - + -J3 Internal Load Protection: 0 watts Maximum Input Power: ±0.1 db OperatingTemperature: 30 to +70 C.78 [19,81] 1[29,2] 2.80[71,1] J3 D313MS-3 DIA. THRU (2) PLACES MATE WITH MALE (3) PLACES 2.30[58,4].06 [1,52] 3.30[83,82] See us on the 10/98

3 2 WAY DIVIDER/COMBINER, POWER D313MS GHz 1:1 Maximum -J3 -J3 3.5 db Maximum -; -J3 Internal Load Dissipation: 00 Watts Maximum 30 to +70 C.12[3,05] R MAX. TYP 3[88,9] D313MS-4.16[4,06] R TYP.175[4,45] DIA. MATE WITH MALE (3) PLACES.06[1,52] R MAX TYP.06[1,52] TYP.06 [1,52] 25[66,17] 4.00±.05 [101,6±1,3] #4-40 X.62[15,75] SCREW D301LS MHz 3.8 db Maximum 1.30 Maximum 25 db Minimum 1 Watt combined total ±1.0 Maximum 55 C to +85 C.40 [10,2] N TYPE CONN. FEM. PER MIL-C-39012/2 J3 D301LS 1 DIA. MOUNT. HOLE [22,9] 1.80 [45,7] Input Power: D353MS GHz 1.4:1 Typical 18 db Minimum 3.8 db Maximum Unit operates as divider 1 KW Peak Maximum Duty cycle 1.1% Maximum ±5 Maximum 30 C to +70 C 0 DIA THRU.13 [3,30] 10[44,5] D353MS S/N 1.43 [36,32] 2.85 [72,4] [14,99] TYP [9,65] 0 MATES WITH TYPE`N`MALE 10/98 See us on the

4 3 WAY DIVIDERS/COMBINERS, POWER D396LS MHz.16 [4,06] 1.670[42,42] 1.3:1 Maximum 5.4 db Maximum (incl.div.loss) 1 INPUT D396LS.172 ±.005 [4,369±0.13] DIA. MOUNTING HOLE 2 PLACES J3.27[6,86] (at input as divider) 0 to +70 C 0 MATES WITH MALE 4 PLACES D302LS MHz 5.4 db Maximum 1.45 [11,4] J3 J4 D302LS N TYPE CONN. FEM. PER MIL-C-39012/2 J4 DIA. THRU MOUNTING HOLE. 1 Maximum 30 db Minimum RF Power 1 Watt combined total 20[66,04]. 55 to +85 C 1.45[36,8] 2.90[73,7] D336LS MHz 5.6 db Minimum 1.30:1 Maximum MATES WITH TYPE `N` MALE 4.36[110,74] 2.400[61,0] 1.10 [27,9] MTG. SURFACE TO BE FREE OF PAINT ±0.6 db Maximum Internal termination not to dissipate more than 75 W over the temperature range of 55 to 85 C at the mounting surface. 0 0 D336LS [68,6] 3.00 [76,2] 1 WHEN USED AS A POWER DIVIDER Power In Maximum Ret.Loss* 25W 0 db 50W 0 db 100W 2 db 300W 7 db 500W 13 db *At outputs any phase [14,99] 0 DIA. THRU 4 PLACES [14,99] See us on the 10/98

5 3 WAY DIVIDERS/COMBINERS, POWER D364MS MHz Insertion Loss above 4.8 db: 1.0 db 14 db Minimum ± 0.2 db Maximum ±3 Maximum 1.35 Maximum 30 C to +70 C.125[3,18] DIA..12 [3,1] 10 [31,75].24[6,1] 1 TYP 20[69,85] D364MS S/N MATES WITH MALE CONNECTOR PER MIL-C PLCS 2 [63,5].56 [14,2] Differential Loss from to & J3: D306NS 1090 ±10 MHz 1.3:1 Maximum all ports.3-.4 db Typical In to, J3: 0.5 db above 4.8 db ± 0.2 db Maximum (matched as divider) 30 C to +70 C.375 [9,53] 0 [50,80] 1[44,5] 10[40,39] D306NS.101[2,57] DIA. THRU FEMALE CONNECTOR RECEPTACLE PER MIL-C PLCS 2 [69,9].875 [22,23] [28,58] 0 J3 IN 2-56 UNC-2B X.19[4,8] DP D343MS MHz 0.5 db Maximum 1.3:1 Maximum for all ports 30 C to +70 C D397LS /N MHz 1.2:1 db Maximum 20.0 db Minimum 5.3 db Maximum (incl.divide loss) 0.5 watts Minimum at combined port 30 C to +70 C 2.68 [68,1] 2 [60,5] 1.34 [34,0] D343MS 6[3,96] DIA. THRU 2 HOLES.89 [22.6] MATES WITH TYPE `` MALE 4 PLCS 2[63,5] 1 D397LS MATES WITH MALE.270[6,86] DIA. THRU.26 [6,6].89 [22,6] [9,7] [15,0].375 ±.030 [9,53±0,76] MATES WITH TYPE`N`MALE 10/98 See us on the