SDA SMA DATA SHEET
|
|
- Lily Willis
- 5 years ago
- Views:
Transcription
1 0 to 60 db 10 Bit Programmable TTL Controlled Step Attenuator With a 006 db Step SMA Female To SMA Female From 500 MHz To 18 GHz The is a Non-Reflective 10 Bit Programmable 60 db Pin Diode Attenuator with Step Resolution as Low as 006 db over the Operating Frequency Range from 05 GHz to 18 GHz The is offered in a slim line housing measuring only 05 Height The RF Input/Output Connectors are SMA Female Along with a 15 Pin Micro-D Female Control Socket The unit is shipped with a Micro-D Mating Connector Electrical Specifications (Values at 25 C, sea level) Description Min Typ Max Unit Frequency Range GHz Mean Attenuation Range 0 60 db Insertion Loss 45 db Input VSWR 2:1 Input at P1dB +15 dbm Survival Power Average +30 dbm Attenuation 20 db ±1 40 db ± db ±3 db Accuracy of Attenuation 0 db to 20 db ±1 db 20 db to 40 db ±15 db 40 db to 60 db ±2 db Features: Non-Reflective 10 Bit Programmable 60 db Pin Diode Attenuator 05 GHz to 18 GHz Frequency Range 60 db Attenuation Range Step Resolution of 006 db 1 Watt Average Survival Power Insertion Loss 45 db Max VSWR 20:1 Max RF Connectors are SMA Female 15 Pin Micro-D Female Connector Applications: Electronic Warfare Test & Measurement Military & Space Radar Military Communications Systems Step Size 006 db Switching Time On Time 1 µs Off Time 05 µs DC Power Supply 150 ma 12 Volts Logic Input Logic 0 (Bit Off) Volts Logic 1 (Bit On) 2 5 Volts Mechanical Specifications Size Length Width Height Connector 1 Connector 2 2 in [508 mm] 18 in [4572 mm] 05 in [127 mm] SMA Female SMA Female Fairview Microwave 1130 Junction Dr #100 Allen, TX Tel: / (972) Fax: (972) wwwfairviewmicrowavecom sales@fairviewmicrowavecom REV 10 Page 1 of 7 Copyright 2014
2 Environmental Specifications Temperature Operating Range Storage Range -40 to +85 deg C -65 to +125 deg C Humidity MIL-STD-202F, METHOD 103B COND B Shock MIL-STD-202F, METHOD 213B COND B Vibration MIL-STD-202F, METHOD 204D COND B Altitude MIL-STD-202F, METHOD 105C COND B Temperature Cycle MIL-STD-202F, METHOD 107 Compliance Certifications (visit wwwfairviewmicrowavecom for current document) Not RoHS Compliant Plotted and Other Data Notes: Values at +25 C, sea level ESD Sensitive Material, Transport material in Approved ESD bags Handle only in approved ESD Workstation 1130 Junction Dr #100 Allen, TX Tel: / (972) / Fax: (972) REV 10 Page 2 of 7
3 Typical Performance Data 5 ATTENUATION VS FREQUENCY ATTENUATION (db) FREQUENCY (GHz) 1130 Junction Dr #100 Allen, TX Tel: / (972) / Fax: (972) REV 10 Page 3 of 7
4 Insertion Loss and 0dB Attenuation 20dB Attenuation 1130 Junction Dr #100 Allen, TX Tel: / (972) / Fax: (972) REV 10 Page 4 of 7
5 40dB Attenuation 60dB Attenuation 1130 Junction Dr #100 Allen, TX Tel: / (972) / Fax: (972) REV 10 Page 5 of 7
6 Delay On Measured with a Tunnel 10GHz Power Level +5dBm Channel 1 (Yellow): Tunnel Diode output Channel 2 (Green): TTL Input from Signal Generator Delay Off Measured with a Tunnel 10GHz Power Level +5dBm Channel 1 (Yellow): Tunnel Diode output Channel 2 (Green): TTL Input from Signal Generator 0 to 60 db 10 Bit Programmable TTL Controlled Step Attenuator With a 006 db Step SMA Female To SMA Female From 500 MHz To 18 GHz from Fairview Microwave is in-stock and available to ship same-day All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Allen, Texas Fairview Microwave is RF on-demand For additional information on this product, please click the following link: 0 to 60 db 10 Bit Programmable TTL Controlled Step Attenuator With a 006 db Step SMA Female To SMA Female From 500 MHz To 18 GHz URL: aspx 1130 Junction Dr #100 Allen, TX Tel: / (972) / Fax: (972) REV 10 Page 6 of 7
7 0 to 60 db 10 Bit Programmable TTL Controlled Step Attenuator With a 006 db Step SMA Female To SMA Female From 500 MHz To 18 GHz 1130 Junction Dr #100 Allen, TX Tel: / (972) / Fax: (972) REV 10 Page 7 of 7
FMSW6129 DATA SHEET. SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA.
SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA The FMSW6129 is an SP4T Electromechanical Relay Switch that operates over a wide frequency
More informationFMSW6124 DATA SHEET. Transfer Latching Electro-Mechanical Relay Switch From DC to 40 GHz, 5 Watts with Indicators, TTL, Self Cut Off, Diodes, 2.
Transfer Latching Electro-Mechanical Relay Switch From DC to 40 GHz, 5 Watts with Indicators, TTL, Self Cut Off, Diodes, 2.92mm The FMSW6124 is a Transfer Electromechanical Relay Switch that operates over
More informationSEMS-4079-SP8T-SMA DATA SHEET
SP8T Latching Electro-Mechanical Relay Switch From DC to 18 GHz, 100 Watts with Self Cut Off, Auto Reset, Indicators, Diodes, SMA The SEMS-4079-SP8T-SMA is an SP8T Terminated Electromechanical Relay Switch
More informationFMSW6097 DATA SHEET. SPDT Failsafe Electro-Mechanical Relay Switch From DC to 26.5 GHz, 20 Watts with TTL, Diodes, Indicators, SMA.
SPDT Failsafe Electro-Mechanical Relay Switch From DC to 26.5 GHz, 20 Watts with TTL, Diodes, Indicators, SMA The FMSW6097 is an SPDT Electromechanical Relay Switch that operates over a wide frequency
More informationSPA SMA DATA SHEET
43 db Gain Medium Power High Gain Amplifier at 3 Watt P1dB Operating From 14.4 GHz to 15.4 GHz with 41 dbm IP3 and SMA SPA-154-43-03-SMA is a 3 Watt Ku Band high gain power coaxial amplifier operating
More informationFMAM5032 DATA SHEET. 48 db Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 dbm IP3 and SMA.
48 Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 m IP3 and SMA FMAM5032 is a high gain Class A/AB GaN Linear Power Amplifier operating in the 500 to 3000 MHz
More informationFMAM1035 DATA SHEET. 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA. Features: Applications:
FMAM13 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA The FMAM13 is a low phase noise amplifier that operates across the frequency range from 3 GHz
More informationFMAM4032 DATA SHEET. 10 MHz to 6 GHz, Medium Power Broadband Amplifier with 900 mw, 24 db Gain and SMA. Features: Applications:
FMAM432 1 MHz to 6 GHz, Medium Power Broadband Amplifier with 9 mw, 24 db Gain and SMA FMAM432 two stage amplifier operates across a wide frequency range from 1 MHz to 6 GHz The design utilizes GaAs PHEMT
More informationSLA SMA DATA SHEET
SLA-6-8-4-SMA 8 Gain Limiting Amplifier Operating From 2 GHz to 6 GHz with -61 to 1 Pin, 1 Psat and SMA The SLA-6-8-4-SMA is a 2 to 6 GHz high gain wide-band coaxial limiting amplifier. The model operates
More informationSA26B-10 DATA SHEET. 10 db Fixed Attenuator SMA Male To SMA Female Up To 26 GHz Rated To 2 Watts With Passivated Stainless Steel Body.
10 db Fixed Attenuator SMA Male To SMA Female Up To 26 GHz Rated To 2 Watts With Passivated Stainless Steel Body Fairview Microwave carries a broad selection of fixed attenuators with a wide range of attenuation
More informationFMMX9003 DATA SHEET. Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm.
FMMX93 Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm FMMX93 is an I/Q double balanced millimeter-wave mixer module that operates across
More informationSA18N-20 DATA SHEET. 20 db Fixed Attenuator N Male To N Female Up To 18 GHz Rated To 2 Watts With Passivated Stainless Steel Body.
20 db Fixed Attenuator N Male To N Female Up To 18 GHz Rated To 2 Watts With Passivated Stainless Steel Body Fairview Microwave carries a broad selection of fixed attenuators with a wide range of attenuation
More informationFMSN3902 DATA SHEET. USB Frequency Synthesizer PLL (Phase Locked Loop), Operating From 5 GHz to 10 GHz With SMA Output. Features: Applications:
USB Frequency Synthesizer PLL (Phase Locked Loop), Operating From 5 GHz to 10 GHz With SMA Output FMSN3902 is a Frequency Synthesizer Module that covers a wide frequency band from 5 GHz to 10 GHz with
More informationSC6015 DATA SHEET. BNC Female Bulkhead Connector Crimp/Solder Attachment For.100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100-FR Cable
BNC Female Bulkhead Connector Crimp/Solder Attachment For 100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100-FR Cable BNC female bulkhead connector with crimp/solder attachment for 100 inch, RG316,
More informationFMPB1002 DATA SHEET. Coaxial RF GS Probe with 800 Micron Pitch Up to 20 GHz with 3.5mm Interface and Cable Mount. Configuration: Features:
Coaxial RF GS Probe with 800 Micron Pitch Up to 20 GHz with 3.5mm Interface and Cable Mount Coaxial RF GS probe, part number FMPB1002, from Fairview Microwave is in-stock and ships same day. This probe
More informationFrequency Divider, Divide by 2 Prescaler Module, 500 MHz to 18 GHz, Field Replaceable SMA
Features Divide by 2 Prescaler Wide Frequency Band GaAs HBT MMIC Technology Low Phase Noise -15 dbc/hz @ 1 khz offset Output Power -4 dbm Low Reverse Leakage Level 55 db typical Applications Electronic
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
50W Broadband High Power Amplifier Module 500 2500MHz Electrical Specifications, T A = +25⁰C, Vdd = +28V Features Ultra-broadband Amplifier Module Small and lightweight Supply Voltage: +28V Parameter Min.
More informationRF-LAMBDA. ABSORPTIVE 2-4 GHz 6 Bits 64dB PIN DIODE ATTENUATOR. Absorptive Pin Diode Attenuator 6 Bits 64dB 2-4GHz RFDAT0204G6A.
7 65 6 55 5 5 35 3 25 2 5 5 Frequenc y (GHz) 2- Attenuation Value Insert. Loss 3.dB typ. 3.5dB max. ABSORPTIVE 2- GHz 6 Bits 6dB PIN DIODE ATTENUATOR VSWR Control bits Features Wide Band Operation 2.-.GHz
More informationQN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400
QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400 RF Connectors Technical Data Sheet PE44978 Configuration QN Male Connector 50 Ohms Straight Body Geometry Features Max Operating
More informationMain Features: ERZ-LNA Typical applications: Performance
Main Features: Frequency Range: 2 to 45 GHz. Typical values: Gain 15 db, NF 5 db RF connectors (I/O): 2.4 mm Solder filtered pins for DC connection Several mounting options Gold platted compact aluminum
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Voltage Control Phase Shifter 2-4GHz Features Wide Band Operation 2-4GHz 360 Phase Shift Low Insertion Loss and Low Phase Error Singe Control Operation Customization available upon request Electrical Specifications,
More information12D05A L- & S-Band Solid State Power Amplifier
12D05A L- & S-Band Solid State Power Amplifier 35 Watts CW @ 1.7 GHz to 2.1 GHz 20 Watts CW @ 2.1 GHz to 2.4 GHz P/N: NW-PA-12D05A (Includes NW-PA-ACC-CB09MC interface cable) The NuPower 12D05A is a small,
More informationTEST REPORT. 9 TO 11 GHz PHASE SHIFTER. PMI MODEL No: PS-360-DC-1 OPTION 911 Serial Number: PM MAY 25, 2008
Rpt No: TR1-PS-BB-1208-WEB TEST REPORT ON 9 TO 11 GHz PHASE SHIFTER PMI MODEL No: PS-360-DC-1 OPTION 911 Serial Number: PM805102 DESIGNED BY BRENT BAKER, ASHOK GORWARA, KEVIN SIMMS TESTED BY BRENT BAKER
More informationParameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +37
AMT-A0060 6 GHz to 18 GHz Broadband Low Noise Amplifier with 5W CW Limiter Data Sheet Features 6 GHz to 18 GHz Frequency Range Typical Noise Figure < 2.2 db Typical Gain 25 db Gain Flatness < ± 1.5 db
More informationC20R01 C-Band Solid State Power Amplifier
C20R01 C-Band Solid State Power Amplifier 20 Watts CW, 4.4 GHz - 4.9 GHz 2 Watts Linear, 4% EVM @ 33 dbm P/N: NW-PA-C-20-R01 (Includes NW-PA-ACC-CB09MC interface cable) The NuPower C20R01 is a small, highly
More informationMini Circuits SMA Attenuators
Mini Circuits 15542 SMA Attenuators For rugged, reliable, and repeatable attenuation when accuracy is key, our customers have come to rely on Mini Circuits Fixed. Precision Attenuators. They feature stainless
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Absorptive Voltage Controlled Attenuator 4-8GHz Features Wide Band Operation 4-8GHz Wide Attenuation Range 30dB Absorptive Topology Singe Control Operation Electrical Specifications, T A = 25 C Description
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
80W Broadband High Power Amplifier Module 20-1000MHz Electrical Specifications, T A = +25⁰C, VDD = +28V Features Broadband High Power High Efficiency Great Linearity Small Size & Light Weight Low Distortion
More informationSolid State PIN Control Products
Solid State Control 2-18 GHz High Speed Switched-Bit Attenuators y Very High Speed y Precise Attenuation over Frequency Bd y Small Package Size y Low Insertion Loss y Hermetically Sealed Options Available
More informationTypical Performance Curves
Coaxial SMA Fixed Attenuator 50Ω 1W 3dB DC to 6000 MHz Maximum Ratings Operating Temperature -45 C to 100 C Storage Temperature -55 C to 100 C Permanent damage may occur if any of these limits are exceeded.
More informationParameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +10
AMT-A0112 11 GHz to 18 GHz Broadband Low Noise Amplifier Data Sheet Features 11 GHz to 18 GHz Frequency Range Typical Noise Figure < 1.4 db Typical Gain 40 db Gain Flatness < ± 2 db +14 dbm P1dB Internally
More informationNuPower TM. 11B02A Mini Multi-Octave Power Amplifier. Features. Applications. Benefits. 10 Watt CW 200 MHz MHz P/N: NW-PA-11B02A
11B02A Mini Multi-Octave Power Amplifier 10 Watt CW - 2600 MHz P/N: NW-PA-11B02A (includes NW-PA-ACC-CB09ME interface cable) The NuWaves NuPower TM 11B02A is a highly efficient, miniature solid state power
More informationParameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +37
AMT-A0246 4 GHz to 8 GHz Broadband LNA with 5 W Protection Limiter Data Sheet Features 4 GHz to 8 GHz Frequency Range +37 dbm (5W) CW Pin survival Gain 28 db Typical Gain Flatness ± 0.6 db Typical 2.2
More informationSMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, inch
SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, 0195 inch RF Connectors Technical Data Sheet PE4215 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight
More information12B01A-09 S-Band Solid State Power Amplifier
12B1A-9 S-Band Solid State Power Amplifier Watt CW 2.5 Watts Linear, 5% EVM @ 34 dbm 2. GHz - 2.5 GHz P/N: NW-PA-12B1A-9 The NuPower 12B1A-9 is a small, highly efficient solid state power amplifier that
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Reflective Coaxial SP2T Switch 50 700MHz Electrical Specifications, TA = +25 C, Vdd = +5V/-28V, TTL = 0 / +5V Description Features Wide Band Operation 50-700MHz TTL compatible driver included Fast Switching
More information12B01A-D30 L- & S-Band Solid State Power Amplifier w/ 1 Watt Input Drive Level
12B01A-D30 L- & S-Band Solid State Power Amplifier w/ 1 Watt Input Drive Level 10 Watts (CW) 1.0-2.5 GHz P/N: NW-PA-12B01A-D30 (Replaces P/N: NW-SSPA-10W-1.0-2.5-D30) The NuPower 12B01A-D30 is a small,
More informationS Band 7 Bit Digital Attenuator
S Band 7 Bit Digital Attenuator Features Frequency Range: 2.8-3.8 GHz Low Insertion Loss 4 db(typ.) Max. Attenuation of 31.75 db RMS Amplitude Error < 0.3 db Input & Output Return Loss > 12 db 32 Lead
More information12B01A L- & S-Band Solid State Power Amplifier
12B1A L- & S-Band Solid State Power Amplifier 1 Watt CW 2.5 Watts Linear, 5% EVM @ 34 dbm 1. GHz - 2.5 GHz P/N: NW-PA-12B1A (includes NW-PA-ACC-CB9MA interface cable) The NuPower 12B1A is a small, highly
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Ultra Wide Band Low Noise Amplifier 0.01GHz~10GHz Electrical Specifications, TA = 25, Vcc = 12V Features Gain: 28dB Typical Noise Figure: 2.5dB Typical High P1dB: 15dBm Typical Supply Voltage: 12V Parameter
More informationParameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20
AMT-A0142 1 GHz to 18 GHz Broadband Medium Power with Low Noise Amplifier Data Sheet Features 1 GHz to 18 GHz Frequency Range Typical P1dB power > +23 dbm Gain 18 db Typical Gain Flatness ± 1 db Typical
More informationParameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +10
AMT-A0091 0.01 GHz to 6 GHz Broadband Low Noise Medium Power Amplifier Data Sheet Features 0.01 GHz to 6 GHz Frequency Range Typical Noise Figure < 1.2 db Typical Gain 45 db Gain Flatness < ± 1.2 db +20
More informationHN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
HN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4474 Configuration HN Male Connector MIL-STD-348A 50 Ohms Features Max Operating Frequency 3
More information100W Wide Band Power Amplifier 6GHz~18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz Gain db
100W Wide Band Power Amplifier 6GHz~18GHz Features Wideband Solid State Power Amplifier Psat: +50dBm Gain: 75 db Typical Supply Voltage: +48V On board microprocessor driven bias controller. Electrical
More informationSMA Male QD Connector Crimp/Solder Attachment For RG142, RG223, RG400, RG55
SMA Male QD Connector Crimp/Solder Attachment For RG142, RG223, RG400, RG55 RF Connectors Technical Data Sheet Configuration SMA Male Connector 50 Ohms Straight Body Geometry RG142, RG223, RG400, RG55
More informationSolid State PIN Control Products
Power Monitors d Sensors Description 0.5-18 GHz d 2-18 GHz Super-Slim High Performce Drop-In Switches y Reflective d Absorptive Introduction y SPST thru SP6T d Trsfer (Stdard) y High Speed y High Isolation
More information12B04A L- & S-Band Bidirectional Amplifier
NuPower Xtender TM 12B4A L- & S-Band Bidirectional Amplifier Watt CW 2. Watts Linear, % EVM @ 34 dbm 1. GHz - 2. GHz P/N: NW-BA-12B4A (includes NW-BA-ACC-CB9MA) The NuPower Xtender TM 12B4A is a small,
More informationTITANIUM SERIES R 51 PART NUMBER SELECTION. High Performance Multiport Switches. Our Most Important Connection is with You.
PART NUMBER SELECTION Models: 2: Without 50 Ω terminations 4: With 50 Ω terminations RF Connectors: 3: SMA up to 6 GHz 4: SMA up to 20 GHz F: SMA up to 26.5 GHz 8: SMA 2.9 up to 40 GHz (1) Radiall s TITANIUM
More informationParameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20. DC Current A 1.6
AMT-A0030 2 GHz to 18 GHz 8W 41 db Gain Broadband High Power Amplifier Module Data Sheet Features 2 GHz to 18 GHz Frequency Range Typical Psat power > +39 dbm Gain 41 db High Efficiency Internally Regulated
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Absorptive Coaxial SP3T Switch 0.5-50GHz Electrical Specifications, T A = +25 C, Vdd = +5V/-5V, TTL = 0 / +5V Description PN: SP3T Absorptive Switch Low Power Cold Switching Parameter Min Typ Max Min Typ
More informationHILNA V1 Low Noise Amplifier
HILNA V1 Low Noise Amplifier 50-1000 MHz db Gain P/N: HILNA-V1 (includes NW-LN-ACC-CB02CA interface cable) NuWaves HILNA V1 is the first in its class of broadband low noise amplifiers designed to achieve
More informationSolid State General Communication Power Amplifier
The GCS1D2GUT (SKU 4062) is suitable for broadband high power linear applications in the HF frequency range. This rack mount amplifier utilizes pushpull MOSFET power devices that provide high gain, wide
More informationSurface Mount PIN Diode Limiter
Surface Mount LM501202-L-C-300 Series Datasheet Features Surface Mount Limiter in Compact Outline: 8mm L x 5mm W x 2.5 mm H Incorporates PIN Limiter Diodes, D.C. Blocks & D.C. Return Higher Peak Power
More information4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz
4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 40 db Typical Psat: +37 dbm Typical Noise Figure: 3dB Typical Supply Voltage: +24V (-NP) / +36V (-WP)
More informationFeatures 100A400AM20. 4kHz 400MHz Class A Portable Full VSWR tolerant CE & RoHS compliant High Efficiency
Specifications Class A Portable Full VSWR tolerant CE & RoHS compliant High Efficiency Features The Model is a solid-state, self -contained, air-cooled, broadband amplifier designed for applications requiring
More informationHILNA LS Low Noise Amplifier
HILNA LS Low Noise Amplifier 1000-3000 MHz 50 db Gain P/N: HILNA-LS (includes NW-LN-ACC-CB4MUA interface cable) NuWaves HILNA LS is a broadband low noise amplifier covering L- & S-bands, and designed to
More informationParameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20
AMT-A0119 0.8 GHz to 3 GHz Broadband High Power Amplifier W P1dB Data Sheet Features 0.8 GHz to 3GHz Frequency Range Class AB, High Linearity Gain db min 55 db Typical Gain Flatness < ± 1.2 db Typical
More informationPAGE 1/12 ISSUE SERIES DP3T/SPDT PART NUMBER R595 XXX XXX
PAGE 1/12 ISSUE 22-06-2018 SERIES DP3T/SPDT PART NUMBER R595 XXX XXX DP3T-SPDT Coaxial Switches DC to 6 GHz, DC to 20 GHz, DC to 26.5 GHz, DC to 40 GHz Radiall s PLATINUM SERIES switches are optimised
More information7/16 DIN Male Connector Clamp/Solder Attachment for RG213, RG55, RG141, RG142, RG223, RG400, RG303, PE-C195, PE-P195, LMR-195
7/16 DIN Male Connector Clamp/Solder Attachment for RG213, RG55, RG141, RG142, RG223, RG400, RG303, PE-C195, PE-P195, LMR-195 RF Connectors Technical Data Sheet PE4567 Configuration 7/16 DIN Male Connector
More informationSurface Mount PIN Diode Limiter
Surface Mount LM200802-M-A-300 Series Datasheet Features Surface Mount Limiter in Compact Outline: 8mm L x 5mm W x 2.5 mm H Incorporates Anti-Parallel Limiter Diodes Broadband Performance (20 MHz 8 GHz)
More information5W Ultra Wide Band Power Amplifier 2-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 5W Ultra Wide Band Power Amplifier 2-18GHz Features Wideband Solid State Power Amplifier Psat: + 37dBm Gain: 35 db Supply Voltage: +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V
More informationParameter Min. Typ. Max. Min. Typ. Max. Units
25W Wide Band Power Amplifier 20-6000MHz Features Wideband Solid State Power Amplifier Psat: +45dBm Typical Gain: 50dB Typical Supply Voltage: +60V DC Electrical Specifications, T A =25 Parameter Min.
More informationSeries CCT-38S Multi-Throw DC 12 GHz, SP7T & SP8T Normally Open Coaxial Switch
COAX SWITCHES Series CCT-38S PART NUMBER CCT-38S DESCRIPTION Commercial Normally Open Multi-throw, DC-12 GHz The CCT-38S is a broadband, multi-throw, electromechanical coaxial switch designed to switch
More informationMADL T. PIN-Schottky Anti-Parallel Diode Limiter 10 MHz - 6 GHz. Features. Functional Schematic. Description. Pin Configuration 3
Features 3 Terminal LPF Broadband Shunt Structure Broadband Frequency > 2.5 W Peak and CW Power Handling < 0.5 db Shunt Insertion Loss < +15 dbm Flat Leakage Power Lead-Free 1.5 x 1.2 mm 6-lead TDFN Package
More information8W Wide Band Power Amplifier 1GHz~22GHz
8W Wide Band Power Amplifier 1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 50 db Typical Psat: +39 dbm Supply Voltage: +36V Electrical Specifications, T A = +25⁰C Typical Applications
More information30W Solid State High Power Amplifier 2-6 GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 30W Solid State High Power Amplifier 2-6 GHz Features Wideband Solid State Power Amplifier Psat: +45dBm Gain: 50dB Supply Voltage: +36V Electrical Specifications, T A = +25⁰C, Vcc = +36V
More information20W Solid State Power Amplifier 26.2GHz~34GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz.
20W Solid State Power Amplifier 26.2GHz~34GHz Features Wideband Solid State Power Amplifier Gain: 65dB Typical Psat: +43dBm Typical Supply : +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V Typical
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.1211 45 Analog Phase Shifter,
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Ultra Wide Band Power Amplifier 0.7GHz ~ 6GHz Features Gain: 35dB typical Output power 38dBm typical High P1dB: 35 dbm Full Band Supply Voltage: 28V 50 Ohm Matched Electrical Specifications, T A = 25⁰C,
More information150W1000B. Features. 150 watts CW 80MHz 1000MHz Class A Portable Full VSWR tolerant CE & RoHS Compliant High Efficiency
Power (Watts) Specifications Class A Portable Full VSWR tolerant CE & RoHS Compliant High Efficiency Features The Model is a solid-state, selfcontained, air-cooled, broadband amplifier designed for applications
More informationTypical Characteristics for LCM-7R7G8R2G-CD-1
PMI MODEL NUMBER IS AN AMPLIFIED RF LASER CONTROL MODULE FOR USE OVER THE FREQUENCY RANGE OF 7.7GHz TO 8.2GHz WITH AN IF RANGE OF DC TO 10KHz. IT FEATURES A 20dB VOLTAGE PROGRAMMABLE ATTENUATOR, AND PHASE
More informationCPDC2X1. 2X1 GPS Combiner Technical Product Data
CPDC2X1 2X1 GPS Combiner Technical Product Data Features Excellent Flatness Extremely Flat Group Delay Less that 1ns variation Low Insertion Loss Passes all GNSS Frequencies (Entire L-band) Provides Antenna
More information7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4571 Configuration 7/16 DIN Male Connector IEC 169-4 50 Ohms Straight Body Geometry Features
More informationOX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-204 OX-204 The OX-204 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -175 dbc/hz. Designed
More informationFeatures wideband coverage, DC to 6000 MHz 2 watt rating rugged unibody construction off-the-shelf availability very low cost
Coaxial SMA Fixed Attenuator 50Ω 2W 7dB DC to 6000 MHz Maximum Ratings Operating Temperature -45 C to 100 C Storage Temperature -55 C to 100 C Permanent damage may occur if any of these limits are exceeded.
More informationSeries CCT-58S/CT-58S Multi-Throw DC-26.5 GHz Normally Open Coaxial Switch
COAX SWITCHES Series CCT-58S/CT-58S PART NUMBER CCT-58S CT-58S DESCRIPTION Commercial Normally Open Multi-throw, DC-26.5GHz Elite Normally Open Multi-throw, DC-26.5GHz The CCT-58S/CT-58S is an internally
More informationSeries CCT-38S/CT-38S Multi-Throw DC 18 GHz/DC-22 GHz Normally Open Coaxial Switch
COAX SWITCHES Series CCT-38S/CT-38S PART NUMBER CCT-38S CT-38S DESCRIPTION Commercial Normally Open Multi-throw, DC-18GHz Elite Normally Open Multi-throw, DC-22GHz The CCT-38S/CT-38S is an internally terminated,
More informationHILNA GPS Low Noise Amplifier
HILNA GPS Low Noise Amplifier 1200-1600 MHz 32 db Gain P/N: HILNA-GPS (includes NW-LN-ACC-CB02CA interface cable) NuWaves HILNA GPS is a broadband low noise amplifier designed to achieve high gain while
More information2 GHz to 6 GHz, 500 W Power Amplifier HMC8113
Data Sheet FEATURES 2 GHz to 6 GHz frequency range 85 db typical small signal gain 57 dbm typical saturated output power 61 db gain control range with 1 db LSB Standard 5U 19-inch rack chassis (per EIA-310D)
More informationSeries CCT-59S Multi-Throw DC-18 GHz, SP7T & SP8T Latching Coaxial Switch, Internal 50Ω Termination
COAX SWITCHES Series CCT-59S PART NUMBER CCT-59S DESCRIPTION Commercial Latching Multi-throw, DC-18GHz The CCT-59S is a broadband, multi-throw, electromechanical coaxial switch designed to switch a microwave
More informationFEU (Front End Unit) for Optic Repeater
FEU (Front End Unit) for Optic Repeater 1. Specification 1.1. All Items Parameter Specification Comments RX1 RX2 TX Frequency Range. 1750.625 ~ 1769.375MHz 1750.625 ~ 1769.375MHz 1840.625 ~ 1859.375MHz
More informationSeries CCT-58S/CT-58S Multi-Throw DC-26.5 GHz Normally Open Coaxial Switch
COAX SWITCHES Series CCT-58S/CT-58S PART NUMBER CCT-58S CT-58S DESCRIPTION Commercial Normally Open Multi-throw, DC-26.5GHz Elite Normally Open Multi-throw, DC-26.5GHz The CCT-58S/CT-58S is an internally
More informationOX-043 Low g-sensitivity Oven Controlled Crystal Oscillator
OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator OX-043 Features Applications Ultra Low g-sensitivity Low Phase Noise High Stability Frequency Range: 8 MHZ to 15 MHZ Standard Frequency 10 MHz
More informationSwitch 50W SPDT Pin Diode, Reflective TTL Driver 10 to 3000 MHz
Coaxial Switch 50W SPDT Pin Diode, Reflective TTL Driver 10 to 3000 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C Power L(+20 dbm), M(+28 dbm), U(+30 dbm)
More information30W Wideband Solid State Power Amplifier 6-12GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 30W Wideband Solid State Power Amplifier 6-12GHz Electrical Specifications, TA = +25⁰C, Vdd = +36V Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 6 9 10 12 GHz Gain 60 55 db
More informationSeries CCT-59S/CT-59S Multi-Throw DC-26.5 GHz Latching Coaxial Switch
PART NUMBER CCT-59S CT-59S DESCRIPTION Commercial Latching Multi-throw, DC-26.5GHz Elite Latching Multi-throw, DC-26.5GHz The CCT-59S/CT-59S is an Internally Terminated broadband, multi-throw, electromechanical
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Electrical Specifications, T A =25 Ultra Wide Band Low Noise Amplifier AC 110V/220V 0.01-20GHz Parameters Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.01 10 10 20 GHz Gain 28 30 26 28 db Gain
More informationSeries CCR-58S/CR-58S Multi-Throw DC 26.5 GHz Normally Open Coaxial Switch
PART NUMBER CCR-58S CR-58S DESCRIPTION Commercial Normally Open Multi-throw, DC-6.5GHz Elite Normally Open Multi-throw, DC-6.5GHz The CCR-58S/CR-58S is a broadband, multi-throw, electromechanical coaxial
More informationTGL2226-SM GHz 6-Bit Digital Attenuator
Product Description Qorvo s TGL2226 SM is a wideband, 6 bit digital attenuator fabricated using Qorvo's production.15um GaAs phemt process (QPHT15). Operating from.1 15 GHz, the TGL2226 SM offers a low
More informationHigh Power Amplifier, Solid State, Broadband MHz, 51dB Gain, SMA Female Connectors, 1dB GCP. RAMP M-51d-Sf-80W-e7
ELECTRICAL SPECIFICATIONS @ +28 VDC, 25 C, 50 Ω System Parameter Symbol Min Typ Max Units Operating Frequency BW 20 1000 MHz Power Output CW P SAT 100 125 Watt Power Output @ 1 db Gain Compression Point
More information100W Power Amplifier 8GHz~11GHz
100W Power Amplifier 8GHz~11GHz High output power +50dBm Aerospace and military application X band radar High Peak to average handle capability All specifications can be modified upon request Parameter
More informationUltra Wide Band Low Noise Amplifier GHz. Electrical Specifications, TA = +25⁰C, With Vg= -5V, Vcc = +4V ~ +7V, 50 Ohm System
Ultra Wide Band Low Noise Amplifier 0.5 46GHz Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.5 20 20 46 GHz Gain 13 13 db Gain Variation Over Temperature (-45 ~ +85) ±3 ±2 db Noise Figure
More informationRF & Microwave Components Design, Development, and Manufacturing
RF & Microwave Components Design, Development, and Manufacturing Power Dividers / Combiners Directional Couplers Hybrid Couplers (90º/180º) Pin-Diode Switches Pin-Diode Attenuators Bias-Tees / DC-Blocks
More informationDC to 400 MHz (40 db Typ. Isolation up to 20 GHz)
Coaxial Low Pass Filter 5Ω DC to 4 MHz (4 db Typ. Isolation up to 2 GHz) The Big Deal Very good rejection, 4 db typ. up to 2 GHz Excellent power handling, 1W Rugged unibody construction CASE STYLE: FF1118
More informationSeries CCRT-33S/CRT-33S Internal 50Ω Termination DC 18 GHz/DC-22 GHz Failsafe SPDT Coaxial Switch
COAX SWITCHES Series CCRT-33S/CRT-33S PART NUMBER CCRT-33S CRT-33S DESCRIPTION Commercial Failsafe SPDT, DC-18GHz, Internal 50Ω Termination Elite Failsafe SPDT, DC-22GHz, Internal 50Ω Termination The CCRT-33S/CRT-33S
More informationRP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402
RP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402 RF Connectors Technical Data Sheet PE4790 Configuration SMA Male Reverse Polarity Connector MIL-STD-348 50 Ohms Right
More informationPassive 1X2 GPS Splitter Technical Product Data
L D C B S 1 X 2 Passive 1X2 GPS Splitter Technical Product Data Features Amplitude Balance J1 J2 < 1.0dB Extremely Flat Group Delay Less that 1ns variation Low Insertion Loss Passes all GNSS Frequencies
More informationSeries CCRT-33S/CRT-33S Internal 50Ω Termination DC 18 GHz/DC-22 GHz Latching SPDT Coaxial Switch
COAX SWITCHES Series CCRT-33S/CRT-33S PART NUMBER CCRT-33S CRT-33S DESCRIPTION Commercial Latching SPDT, DC-18GHz, Internal 50Ω Termination Elite Latching SPDT, DC-22GHz, Internal 50Ω Termination The CCRT-33S/CRT-33S
More informationINSTALLATION & OPERATING INSTRUCTIONS
INSTALLATION & OPERATING INSTRUCTIONS IM-450 Models 153 Programmable Step Attenuator This documentation may not be reproduced in any form, for any purpose unless authorized in writing by API / Weinschel,
More informationSeries CCS-19 Multi-Throw DC-2 GHz Latching Coaxial Switch
PART NUMBER CCS-19 CS-19 DESCRIPTION Commercial Latching Multi-throw, DC-2GHz, with N or TNC connectors Elite Latching Multi-throw, DC-2GHz, with N or TNC connectors The CCS-19/CS-19 is a broadband, multi-throw,
More information