SLA SMA DATA SHEET

Size: px
Start display at page:

Download "SLA SMA DATA SHEET"

Transcription

1 SLA SMA 8 Gain Limiting Amplifier Operating From 2 GHz to 6 GHz with -61 to 1 Pin, 1 Psat and SMA The SLA SMA is a 2 to 6 GHz high gain wide-band coaxial limiting amplifier. The model operates with an input power range of -61 to +1 and maintains a limited output of +1 minimum. This amplifier offers a flat high 8 gain and a gain flatness of ±3. independent of the input. This excellent technical performance is achieved through the use of hybrid MIC design and advanced GaAs PHEMT devices, and supplied the power typically from a +12V DC power supply. The connectorized SMA module includes built-in voltage regulation, bias sequencing, and reverse bias protection for added reliability. The module is hermetically sealed for extreme environmental conditions. Electrical Specifications (TA = +2 C, DC Voltage = 12Volts, DC Current = ma). Description Min Typ Max Unit Frequency Range 2 6 GHz Small Signal Gain 8 Gain Flatness ±3 Input Power Psat +1 Psat Flatness ±1 Noise Figure 4 Input VSWR 2:1 Output VSWR 2:1 Operating DC Voltage Volts Operating DC Current ma Operating Temperature Range C.. Absolute Maximum Rating Parameter Rating Units Source Voltage +1 Volts RF input Power +17 Operating Temperature (base-plate) -3 to +7 C Storage Temperature - to +8 C. Configuration Connector 1 Connector 2 ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation. SMA Female SMA Female Compliance Certifications (visit for current Features: 2 GHz to 6 GHz Frequency Range Wide Input Dynamic Range: -61 to +1 Psat: 1 Min. High Small Signal Gain: 8 Min. Gain Flatness: ±3 max Noise Figure: 4 maximum VSWR (In/Out) 2:1 Ohm Input and Output Matched -3 to 7 C Operating Temperature Unconditionally Stable Regulated Supply & Bias Sequencing Hermetically Sealed Module Overvoltage External Protection for Easy Repair Applications: 2 GHz to 6 GHz Frequency Range Wide Input Dynamic Range: -61 to +1 Psat: 1 Min. High Small Signal. Gain: 8 Min. Gain Flatness: ±3 max Noise Figure: 4 maximum VSWR (In/Out) 2:1 Ohm Input and Output Matched -3 to 7 C Operating Temperature Unconditionally Stable Regulated Supply & Bias Sequencing Hermetically Sealed Module Overvoltage External Protection for Easy Repair Fairview Microwave 113 Junction Dr. #1 Allen, TX 713 Tel: / (972) Fax: (972) sales@fairviewmicrowave.com REV Page 1 of Copyright 214

2 SLA SMA document) Plotted and Other Data Notes: Values at 2 C, sea level ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation. Heat Sink Required for Proper Operation, Unit is cooled by conduction to heat sink. Typical Performance Data 1 Gain, Input Return Loss and Output Return Loss Gain() 2 C IN_Return Loss() OUT_Return Loss() Gain vs Temperature Gain() 2 C Gain() 7 C Gain() -3 C Junction Dr. #1 Allen, TX 713 Tel: / (972) / Fax: (972) Copyright 214 REV Page 2 of

3 SLA SMA NF vs Temperature NF() 2 C NF() 7 C Psat vs Pin GHz 4GHz 6GHz Pin () 113 Junction Dr. #1 Allen, TX 713 Tel: / (972) / Fax: (972) Copyright 214 REV Page 3 of

4 SLA SMA Psat vs 4 Psat 2 C@Pin=-61 4 Psat 7 C@Pin= Psat vs 4 Psat 7 C@Pin=1 4 Psat 2 C@Pin= Gain Limiting Amplifier Operating From 2 GHz to 6 GHz with -61 to 1 Pin, 1 Psat and SMA from Fairview Microwave is in-stock and available to ship same-day. All of our RF/microwave products are available off-the-shelf from our ISO 91:28 certified facilities in Allen, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: 8 Gain Limiting Amplifier Operating From 2 GHz to 6 GHz with -61 to 1 Pin, 1 Psat and SMA SLA SMA URL: Junction Dr. #1 Allen, TX 713 Tel: / (972) / Fax: (972) Copyright 214 REV Page 4 of

5 SLA SMA 8 Gain Limiting Amplifier Operating From 2 GHz to 6 GHz with -61 to 1 Pin, 1 Psat and SMA Copyright 214 REV Page of

SPA SMA DATA SHEET

SPA SMA DATA SHEET 43 db Gain Medium Power High Gain Amplifier at 3 Watt P1dB Operating From 14.4 GHz to 15.4 GHz with 41 dbm IP3 and SMA SPA-154-43-03-SMA is a 3 Watt Ku Band high gain power coaxial amplifier operating

More information

FMAM5032 DATA SHEET. 48 db Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 dbm IP3 and SMA.

FMAM5032 DATA SHEET. 48 db Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 dbm IP3 and SMA. 48 Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 m IP3 and SMA FMAM5032 is a high gain Class A/AB GaN Linear Power Amplifier operating in the 500 to 3000 MHz

More information

FMAM4032 DATA SHEET. 10 MHz to 6 GHz, Medium Power Broadband Amplifier with 900 mw, 24 db Gain and SMA. Features: Applications:

FMAM4032 DATA SHEET. 10 MHz to 6 GHz, Medium Power Broadband Amplifier with 900 mw, 24 db Gain and SMA. Features: Applications: FMAM432 1 MHz to 6 GHz, Medium Power Broadband Amplifier with 9 mw, 24 db Gain and SMA FMAM432 two stage amplifier operates across a wide frequency range from 1 MHz to 6 GHz The design utilizes GaAs PHEMT

More information

FMAM1035 DATA SHEET. 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA. Features: Applications:

FMAM1035 DATA SHEET. 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA. Features: Applications: FMAM13 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA The FMAM13 is a low phase noise amplifier that operates across the frequency range from 3 GHz

More information

SDA SMA DATA SHEET

SDA SMA DATA SHEET 0 to 60 db 10 Bit Programmable TTL Controlled Step Attenuator With a 006 db Step SMA Female To SMA Female From 500 MHz To 18 GHz The is a Non-Reflective 10 Bit Programmable 60 db Pin Diode Attenuator with

More information

FMSW6124 DATA SHEET. Transfer Latching Electro-Mechanical Relay Switch From DC to 40 GHz, 5 Watts with Indicators, TTL, Self Cut Off, Diodes, 2.

FMSW6124 DATA SHEET. Transfer Latching Electro-Mechanical Relay Switch From DC to 40 GHz, 5 Watts with Indicators, TTL, Self Cut Off, Diodes, 2. Transfer Latching Electro-Mechanical Relay Switch From DC to 40 GHz, 5 Watts with Indicators, TTL, Self Cut Off, Diodes, 2.92mm The FMSW6124 is a Transfer Electromechanical Relay Switch that operates over

More information

FMSW6097 DATA SHEET. SPDT Failsafe Electro-Mechanical Relay Switch From DC to 26.5 GHz, 20 Watts with TTL, Diodes, Indicators, SMA.

FMSW6097 DATA SHEET. SPDT Failsafe Electro-Mechanical Relay Switch From DC to 26.5 GHz, 20 Watts with TTL, Diodes, Indicators, SMA. SPDT Failsafe Electro-Mechanical Relay Switch From DC to 26.5 GHz, 20 Watts with TTL, Diodes, Indicators, SMA The FMSW6097 is an SPDT Electromechanical Relay Switch that operates over a wide frequency

More information

FMSW6129 DATA SHEET. SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA.

FMSW6129 DATA SHEET. SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA. SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA The FMSW6129 is an SP4T Electromechanical Relay Switch that operates over a wide frequency

More information

SEMS-4079-SP8T-SMA DATA SHEET

SEMS-4079-SP8T-SMA DATA SHEET SP8T Latching Electro-Mechanical Relay Switch From DC to 18 GHz, 100 Watts with Self Cut Off, Auto Reset, Indicators, Diodes, SMA The SEMS-4079-SP8T-SMA is an SP8T Terminated Electromechanical Relay Switch

More information

SA26B-10 DATA SHEET. 10 db Fixed Attenuator SMA Male To SMA Female Up To 26 GHz Rated To 2 Watts With Passivated Stainless Steel Body.

SA26B-10 DATA SHEET. 10 db Fixed Attenuator SMA Male To SMA Female Up To 26 GHz Rated To 2 Watts With Passivated Stainless Steel Body. 10 db Fixed Attenuator SMA Male To SMA Female Up To 26 GHz Rated To 2 Watts With Passivated Stainless Steel Body Fairview Microwave carries a broad selection of fixed attenuators with a wide range of attenuation

More information

SA18N-20 DATA SHEET. 20 db Fixed Attenuator N Male To N Female Up To 18 GHz Rated To 2 Watts With Passivated Stainless Steel Body.

SA18N-20 DATA SHEET. 20 db Fixed Attenuator N Male To N Female Up To 18 GHz Rated To 2 Watts With Passivated Stainless Steel Body. 20 db Fixed Attenuator N Male To N Female Up To 18 GHz Rated To 2 Watts With Passivated Stainless Steel Body Fairview Microwave carries a broad selection of fixed attenuators with a wide range of attenuation

More information

FMMX9003 DATA SHEET. Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm.

FMMX9003 DATA SHEET. Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm. FMMX93 Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm FMMX93 is an I/Q double balanced millimeter-wave mixer module that operates across

More information

FMPB1002 DATA SHEET. Coaxial RF GS Probe with 800 Micron Pitch Up to 20 GHz with 3.5mm Interface and Cable Mount. Configuration: Features:

FMPB1002 DATA SHEET. Coaxial RF GS Probe with 800 Micron Pitch Up to 20 GHz with 3.5mm Interface and Cable Mount. Configuration: Features: Coaxial RF GS Probe with 800 Micron Pitch Up to 20 GHz with 3.5mm Interface and Cable Mount Coaxial RF GS probe, part number FMPB1002, from Fairview Microwave is in-stock and ships same day. This probe

More information

FMSN3902 DATA SHEET. USB Frequency Synthesizer PLL (Phase Locked Loop), Operating From 5 GHz to 10 GHz With SMA Output. Features: Applications:

FMSN3902 DATA SHEET. USB Frequency Synthesizer PLL (Phase Locked Loop), Operating From 5 GHz to 10 GHz With SMA Output. Features: Applications: USB Frequency Synthesizer PLL (Phase Locked Loop), Operating From 5 GHz to 10 GHz With SMA Output FMSN3902 is a Frequency Synthesizer Module that covers a wide frequency band from 5 GHz to 10 GHz with

More information

SC6015 DATA SHEET. BNC Female Bulkhead Connector Crimp/Solder Attachment For.100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100-FR Cable

SC6015 DATA SHEET. BNC Female Bulkhead Connector Crimp/Solder Attachment For.100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100-FR Cable BNC Female Bulkhead Connector Crimp/Solder Attachment For 100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100-FR Cable BNC female bulkhead connector with crimp/solder attachment for 100 inch, RG316,

More information

Features. = +25 C, +Vdc = +6V, -Vdc = -5V

Features. = +25 C, +Vdc = +6V, -Vdc = -5V v3.7 WIDEBAND LNA MODULE, - 2 GHz amplifiers Typical Applications The Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Industrial Sensors Functional

More information

Frequency Divider, Divide by 2 Prescaler Module, 500 MHz to 18 GHz, Field Replaceable SMA

Frequency Divider, Divide by 2 Prescaler Module, 500 MHz to 18 GHz, Field Replaceable SMA Features Divide by 2 Prescaler Wide Frequency Band GaAs HBT MMIC Technology Low Phase Noise -15 dbc/hz @ 1 khz offset Output Power -4 dbm Low Reverse Leakage Level 55 db typical Applications Electronic

More information

Features. = +25 C, Vdc = +7V

Features. = +25 C, Vdc = +7V amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -7 dbc/hz @ khz Noise Figure: 6 db Gain:

More information

Features. = +25 C, +Vdc = +6V, -Vdc = -5V

Features. = +25 C, +Vdc = +6V, -Vdc = -5V HMC-C59 v.59 WIDEBAND LNA MODULE, - 2 GHz Typical Applications The HMC-C59 Wideband LNA is ideal for: Telecom Infrastructure Features Noise Figure:.8 db @ 8 GHz High Gain: 6 db @ 8 GHz PdB Output Power:

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20. DC Current A 1.6

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20. DC Current A 1.6 AMT-A0030 2 GHz to 18 GHz 8W 41 db Gain Broadband High Power Amplifier Module Data Sheet Features 2 GHz to 18 GHz Frequency Range Typical Psat power > +39 dbm Gain 41 db High Efficiency Internally Regulated

More information

Features. The HMC-C072 is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT. = +25 C, Vdc = +7V

Features. The HMC-C072 is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT. = +25 C, Vdc = +7V amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -67 dbc/hz @ khz Noise Figure: 4.5 db Gain:

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20 AMT-A0142 1 GHz to 18 GHz Broadband Medium Power with Low Noise Amplifier Data Sheet Features 1 GHz to 18 GHz Frequency Range Typical P1dB power > +23 dbm Gain 18 db Typical Gain Flatness ± 1 db Typical

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +37

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +37 AMT-A0246 4 GHz to 8 GHz Broadband LNA with 5 W Protection Limiter Data Sheet Features 4 GHz to 8 GHz Frequency Range +37 dbm (5W) CW Pin survival Gain 28 db Typical Gain Flatness ± 0.6 db Typical 2.2

More information

Features. Gain Variation Over Temperature db/ C

Features. Gain Variation Over Temperature db/ C HMC-C26 Features Typical Applications The HMC-C26 Wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Gain: 3 db

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +10

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +10 AMT-A0091 0.01 GHz to 6 GHz Broadband Low Noise Medium Power Amplifier Data Sheet Features 0.01 GHz to 6 GHz Frequency Range Typical Noise Figure < 1.2 db Typical Gain 45 db Gain Flatness < ± 1.2 db +20

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20 AMT-A0119 0.8 GHz to 3 GHz Broadband High Power Amplifier W P1dB Data Sheet Features 0.8 GHz to 3GHz Frequency Range Class AB, High Linearity Gain db min 55 db Typical Gain Flatness < ± 1.2 db Typical

More information

Features. = +25 C, Vs= +8V to +16V

Features. = +25 C, Vs= +8V to +16V v2.17 Typical Applications The Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Features Electrical Specifications,

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +37

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +37 AMT-A0060 6 GHz to 18 GHz Broadband Low Noise Amplifier with 5W CW Limiter Data Sheet Features 6 GHz to 18 GHz Frequency Range Typical Noise Figure < 2.2 db Typical Gain 25 db Gain Flatness < ± 1.5 db

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +10

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +10 AMT-A0112 11 GHz to 18 GHz Broadband Low Noise Amplifier Data Sheet Features 11 GHz to 18 GHz Frequency Range Typical Noise Figure < 1.4 db Typical Gain 40 db Gain Flatness < ± 2 db +14 dbm P1dB Internally

More information

Features. = +25 C, Vdc = +5V

Features. = +25 C, Vdc = +5V amplifiers Typical Applications The HMC-C is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram v.7 HMC-C Features Ultra Low Phase Noise: -6 dbc/hz @ khz Noise Figure:

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Ultra Wide Band Low Noise Amplifier 0.01GHz~10GHz Electrical Specifications, TA = 25, Vcc = 12V Features Gain: 28dB Typical Noise Figure: 2.5dB Typical High P1dB: 15dBm Typical Supply Voltage: 12V Parameter

More information

5W Ultra Wide Band Power Amplifier 2-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units

5W Ultra Wide Band Power Amplifier 2-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units 7-3 RF-LAMBDA 5W Ultra Wide Band Power Amplifier 2-18GHz Features Wideband Solid State Power Amplifier Psat: + 37dBm Gain: 35 db Supply Voltage: +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V

More information

CHA5294 RoHS COMPLIANT

CHA5294 RoHS COMPLIANT 30-40GHz Medium Power Amplifier GaAs Monolithic Microwave IC CHA5294 RoHS COMPLIANT Description The CHA5294 is a high gain four-stage monolithic medium power amplifier. It is designed for a wide range

More information

30W Solid State High Power Amplifier 2-6 GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units

30W Solid State High Power Amplifier 2-6 GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units 7-3 RF-LAMBDA 30W Solid State High Power Amplifier 2-6 GHz Features Wideband Solid State Power Amplifier Psat: +45dBm Gain: 50dB Supply Voltage: +36V Electrical Specifications, T A = +25⁰C, Vcc = +36V

More information

30W Wideband Solid State Power Amplifier 6-12GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units

30W Wideband Solid State Power Amplifier 6-12GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units 7-3 RF-LAMBDA 30W Wideband Solid State Power Amplifier 6-12GHz Electrical Specifications, TA = +25⁰C, Vdd = +36V Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 6 9 10 12 GHz Gain 60 55 db

More information

4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz

4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz 4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 40 db Typical Psat: +37 dbm Typical Noise Figure: 3dB Typical Supply Voltage: +24V (-NP) / +36V (-WP)

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Wide Band High Power Solid State Power Amplifier 2GHz~6GHz Electrical Specifications, TA = +25⁰C, Vcc = +28V Features Gain: 42 db min Output power +47dBm typical High P1dB: +45dB m Full Band Supply Voltage:

More information

Parameter Min. Typ. Max. Min. Typ. Max. Units

Parameter Min. Typ. Max. Min. Typ. Max. Units 25W Wide Band Power Amplifier 20-6000MHz Features Wideband Solid State Power Amplifier Psat: +45dBm Typical Gain: 50dB Typical Supply Voltage: +60V DC Electrical Specifications, T A =25 Parameter Min.

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +23

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +23 AMT-A0016 50MHz to 500MHz Limiting Amplifier Data Sheet Features Limiting Amplifier provides Pout> +12 dbm even with Pin varying from 18 dbm to 0 dbm Small Signal Gain 33 db Phase Noise 150 db @ 1KHz offset

More information

Ultra Wide Band Low Noise Amplifier GHz. Electrical Specifications, TA = +25⁰C, With Vg= -5V, Vcc = +4V ~ +7V, 50 Ohm System

Ultra Wide Band Low Noise Amplifier GHz. Electrical Specifications, TA = +25⁰C, With Vg= -5V, Vcc = +4V ~ +7V, 50 Ohm System Ultra Wide Band Low Noise Amplifier 0.5 46GHz Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.5 20 20 46 GHz Gain 13 13 db Gain Variation Over Temperature (-45 ~ +85) ±3 ±2 db Noise Figure

More information

100W Wide Band Power Amplifier 6GHz~18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz Gain db

100W Wide Band Power Amplifier 6GHz~18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz Gain db 100W Wide Band Power Amplifier 6GHz~18GHz Features Wideband Solid State Power Amplifier Psat: +50dBm Gain: 75 db Typical Supply Voltage: +48V On board microprocessor driven bias controller. Electrical

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Ultra Wide Band Low Noise Amplifier 0.01GHz~30GHz Electrical Specifications, TA = 25⁰C Features Gain: 36 Typical Noise Figure: 3.5 Typical P1 Output Power: 28m Typical Supply Voltage: AC110V~220V Typical

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Electrical Specifications, T A =25 Ultra Wide Band Low Noise Amplifier AC 110V/220V 0.01-20GHz Parameters Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.01 10 10 20 GHz Gain 28 30 26 28 db Gain

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Ultra Wide Band Power Amplifier 0.7GHz ~ 6GHz Features Gain: 35dB typical Output power 38dBm typical High P1dB: 35 dbm Full Band Supply Voltage: 28V 50 Ohm Matched Electrical Specifications, T A = 25⁰C,

More information

HMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram

HMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single

More information

BROADBAND DISTRIBUTED AMPLIFIER

BROADBAND DISTRIBUTED AMPLIFIER ADM1-26PA The ADM1-26PA is a complete LO driver solution for use with all Marki mixers up to 26. GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry.

More information

8W Wide Band Power Amplifier 1GHz~22GHz

8W Wide Band Power Amplifier 1GHz~22GHz 8W Wide Band Power Amplifier 1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 50 db Typical Psat: +39 dbm Supply Voltage: +36V Electrical Specifications, T A = +25⁰C Typical Applications

More information

DC-20 GHz Distributed Driver Amplifier. Parameter Min Typ Max Min Typ Max Units

DC-20 GHz Distributed Driver Amplifier. Parameter Min Typ Max Min Typ Max Units 7-3 RF-LAMBDA DC-20 GHz Distributed Driver Amplifier Electrical Specifications, T A =25 Features Ultra wideband performance Positive gain slope High output power Low noise figure Microwave radio and VSAT

More information

Features. = +25 C, Vdd= 5V, Vgg2= Open, Idd= 60 ma*

Features. = +25 C, Vdd= 5V, Vgg2= Open, Idd= 60 ma* v.7 HMCLH AGC AMPLIFIER, - GHz Typical Applications The HMCLH is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C I Test Instrumentation Fiber Optics Functional Diagram Features

More information

100W Power Amplifier 8GHz~11GHz

100W Power Amplifier 8GHz~11GHz 100W Power Amplifier 8GHz~11GHz High output power +50dBm Aerospace and military application X band radar High Peak to average handle capability All specifications can be modified upon request Parameter

More information

20W Solid State Power Amplifier 6-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units

20W Solid State Power Amplifier 6-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units 7-3 RF-LAMBDA 20W Solid State Power Amplifier 6-18GHz Electrical Specifications, TA = +25⁰C Vcc = +36V Features Psat: + 43.5dBm Gain: 51 db Supply Voltage: +36V 50 Ohm Matched Short Haul / High Capacity

More information

Features. = +25 C, Vdd= 8V, Idd= 75 ma*

Features. = +25 C, Vdd= 8V, Idd= 75 ma* HMC46LC5 Typical Applications v3.11 AMPLIFIER, DC - 2 GHz Features The HMC46LC5 is ideal for: Noise Figure: 2.5 db @ 1 GHz Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation

More information

2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range

2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range 2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz Features Wideband Solid State Power Amplifier Gain: 37dB Typical Psat 35dBm Typical Electrical Specifications, TA = +25⁰C, Vcc = +12V. Parameter Min. Typ.

More information

HMC618ALP3E AMPLIFIERS - LOW NOISE - SMT. GaAs SMT phemt LOW NOISE AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram

HMC618ALP3E AMPLIFIERS - LOW NOISE - SMT. GaAs SMT phemt LOW NOISE AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram 7 Typical Applications The is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femto Cells Public Safety Radios Functional Diagram v. Electrical Specifications T A = + C, Rbias

More information

Features. Parameter Min. Typ. Max. Units. Frequency Range 8 12 GHz Insertion Loss* db. Input Return Loss* 10 db

Features. Parameter Min. Typ. Max. Units. Frequency Range 8 12 GHz Insertion Loss* db. Input Return Loss* 10 db v4.711 HMC-C Features Low RMS Phase Error: Low Insertion Loss: 7 db Excellent Flatness 3 Coverage, LSB = 22. Hermetically Sealed Module Field Replaceable SMA Female Connectors Typical Applications The

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20 AMT-A0011 100MHz to 2000MHz Ultra Flat Gain with High Linearity Amplifier Data Sheet Features Ultra Flat Gain < ± 0.15 db from 300 to 1400MHz Frequency Range Gain 15 db, BP filter provides for zero gain

More information

GaAs MMIC devices are susceptible to Electrostatic Discharge. Use proper ESD precautions when handling these items.

GaAs MMIC devices are susceptible to Electrostatic Discharge. Use proper ESD precautions when handling these items. ADM-12-931SM The ADM-12-931SM is a small, low power, and economical T3 driver or T3A pre-amplifier. It is a GaAs PHEMT distributed amplifier in a 3mm QFN surface mount package. The ADM-12-931SM can provide

More information

GHz Ultra-wideband Amplifier

GHz Ultra-wideband Amplifier .-3 GHz Ultra-wideband Amplifier Features Frequency Range :. 3.GHz 11. db Nominal gain Gain Flatness: ±2. db Input Return Loss > 1 db Output Return Loss > 1 db DC decoupled input and output.1 µm InGaAs

More information

BROADBAND DISTRIBUTED AMPLIFIER

BROADBAND DISTRIBUTED AMPLIFIER ADM-126-83SM The ADM-126-83SM is a broadband, efficient GaAs PHEMT distributed amplifier with an integrated bias tee in a 4mm QFN surface mount package, designed to provide efficient LO drive for T3 mixers.

More information

MMA GHz, 0.1W Gain Block Data Sheet

MMA GHz, 0.1W Gain Block Data Sheet Features: Frequency Range: 6 22 GHz P1dB: 18.5 dbm @Vds=5V Psat: 19.5 dbm @ Gain: 14 db Vdd =3 to 6 V Ids = 13 ma Input and Output Fully Matched to 5 Ω Applications: Communication systems Microwave instrumentations

More information

MMA C3 6-22GHz, 0.1W Gain Block Data Sheet

MMA C3 6-22GHz, 0.1W Gain Block Data Sheet Features: Frequency Range: 6 22 GHz P1dB: 18.5 dbm @Vdd=5V P3dB: 19.5 dbm @Vdd=5V Gain: 14 db Vdd =3 to 6 V Ids = 130 ma Input and Output Fully Matched to 50 Ω Applications: Communication systems Microwave

More information

2 GHz to 6 GHz, 500 W Power Amplifier HMC8113

2 GHz to 6 GHz, 500 W Power Amplifier HMC8113 Data Sheet FEATURES 2 GHz to 6 GHz frequency range 85 db typical small signal gain 57 dbm typical saturated output power 61 db gain control range with 1 db LSB Standard 5U 19-inch rack chassis (per EIA-310D)

More information

Main Features: ERZ-LNA Typical applications: Performance

Main Features: ERZ-LNA Typical applications: Performance Main Features: Frequency Range: 2 to 45 GHz. Typical values: Gain 15 db, NF 5 db RF connectors (I/O): 2.4 mm Solder filtered pins for DC connection Several mounting options Gold platted compact aluminum

More information

GaAs MMIC devices are susceptible to Electrostatic Discharge. Use proper ESD precautions when handling these items.

GaAs MMIC devices are susceptible to Electrostatic Discharge. Use proper ESD precautions when handling these items. ADM-26-929SM The ADM-26-929SM is a broadband, efficient GaAs PHEMT distributed amplifier in a 4mm QFN surface mount package. It is designed to provide optimal LO drive for T3 mixers and offers 13 db typical

More information

Cascadable Broadband InGaP MMIC Amplifier

Cascadable Broadband InGaP MMIC Amplifier Cascadable Broadband InGaP MMIC Amplifier DC-14 GHz Description AKA-1310MT Akoustis AKA-1310MT cascadable broadband InGaP HBT MMIC amplifier is a low-cost high-performance solution for your general-purpose

More information

Agilent 87415A, 87400A Microwave Amplifiers

Agilent 87415A, 87400A Microwave Amplifiers Agilent 87415A, 87400A Microwave Amplifiers Technical Overview 2 to 8 GHz Features and Description 25 db gain 23 dbm output power GaAs MMIC reliability >1 x 10E6 hours MTBF Compact size, integral bias

More information

HMC639ST89 / 639ST89E

HMC639ST89 / 639ST89E v3.1 HMC63ST / 63STE AMPLIFIER,.2-4. GHz Typical Applications The HMC63ST(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Features

More information

AVP TO 2600 MHz, 15 WATTS HIGH POWER GaNPak B AMPLIFIER AVP2524 SPECIFICATIONS * INTERMODULATION PERFORMANCE ABSOLUTE MAXIMUM RATINGS AVP2524

AVP TO 2600 MHz, 15 WATTS HIGH POWER GaNPak B AMPLIFIER AVP2524 SPECIFICATIONS * INTERMODULATION PERFORMANCE ABSOLUTE MAXIMUM RATINGS AVP2524 Rev. 5/1 6 TO 26 MHz, 15 WATTS HIGH POWER GaNPak B AMPLIFIER Typical Values Broadband....................................... High Gain....................................... High Saturated Power, Psat.........................

More information

RF2317. Laser Diode Driver Return Channel Amplifier Base Stations. CATV Distribution Amplifiers Cable Modems Broadband Gain Blocks

RF2317. Laser Diode Driver Return Channel Amplifier Base Stations. CATV Distribution Amplifiers Cable Modems Broadband Gain Blocks CATV Distribution Amplifiers Cable Modems Broadband Gain Blocks Laser Diode Driver Return Channel Amplifier Base Stations The is a general purpose, low cost high linearity RF amplifier IC. The device is

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Wide Band Power Amplifier 18~45 Features Gain: 35 typical Output power +26m typical High P1: +24 m Full Band Supply Voltage: +12V 50 Ohm Matched Input / Output The photo is only to show the package type.

More information

GaAs MMIC devices are susceptible to Electrostatic Discharge. Use proper ESD precautions when handling these items.

GaAs MMIC devices are susceptible to Electrostatic Discharge. Use proper ESD precautions when handling these items. ADM-26-931SM The ADM-26-931SM is a broadband, power efficient GaAs PHEMT distributed amplifier in a 4mm QFN surface mount package. The ADM-26-931SM is designed to provide optimal LO drive for T3 mixers.

More information

Features = +5V. = +25 C, Vdd 1. = Vdd 2

Features = +5V. = +25 C, Vdd 1. = Vdd 2 v7.11 HMC1LC3 POWER AMPLIFIER, - GHz Typical Applications The HMC1LC3 is ideal for use as a medium power amplifier for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO

More information

Parameter Min. Typ. Max. Min. Typ. Max. Units

Parameter Min. Typ. Max. Min. Typ. Max. Units Electrical Specifications, TA = 25 C, With Vcc = 12V, 50 Ohm System Feature Gain: 36 db Noise Figure: 3.0dB P1dB Output Power: 10dB m full band Supply Voltage: 12V @185mA 50 Ohm Matched Input / Output

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Ultra Wide Band Low Noise Amplifier AC 1V/2V 0.0~ Electrical Specifications, T A =2 Parameters Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.01 1 1 3 GHz Gain 33 36 33 36 db Gain Flatness ±1. ±1.0

More information

20W Solid State Power Amplifier 26.2GHz~34GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz.

20W Solid State Power Amplifier 26.2GHz~34GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz. 20W Solid State Power Amplifier 26.2GHz~34GHz Features Wideband Solid State Power Amplifier Gain: 65dB Typical Psat: +43dBm Typical Supply : +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V Typical

More information

2-6 GHz Broadband 4-Watt Power Amplifiers. One Product. Multiple Solutions.

2-6 GHz Broadband 4-Watt Power Amplifiers. One Product. Multiple Solutions. 2-6 GHz Broadband 4-Watt Power Amplifiers One Product. Multiple Solutions. Spectrum Microwave There is a new microwave technology leader with a proven track record in military and commercial applications...

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC7LP5E POWER AMPLIFIER,.2

More information

Amplifier Systems. Ultra Low Noise LNAs. Back to. C-band LNAs X-band LNAs Ku-band LNAs

Amplifier Systems. Ultra Low Noise LNAs. Back to. C-band LNAs X-band LNAs Ku-band LNAs R Back to Amplifier Systems Ultra Low Noise LNAs C-band LNAs X-band LNAs Ku-band LNAs 100 Davids Drive Hauppauge NY 11788 631-436-7400 Fax: 631-436-7431 www.miteq.com AMFW SATCOM AMPLIFIER SERIES ULTRA

More information

GaAs MMIC devices are susceptible to Electrostatic Discharge. Use proper ESD precautions when handling these items.

GaAs MMIC devices are susceptible to Electrostatic Discharge. Use proper ESD precautions when handling these items. The is a broadband, power efficient GaAs PHEMT distributed amplifier in a 4mm QFN surface mount package. The is designed to provide optimal LO drive for T3 mixers. Typically, ADM-26-2931SM provides. db

More information

Gain Control Range db

Gain Control Range db v1.112-12 GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems X-Band Radar Test Equipment & Sensors Functional Diagram Features Wide Gain Control

More information

SHF Communication Technologies AG. Wilhelm-von-Siemens-Str. 23D Berlin Germany. Phone Fax

SHF Communication Technologies AG. Wilhelm-von-Siemens-Str. 23D Berlin Germany. Phone Fax SHF Communication Technologies AG Wilhelm-von-Siemens-Str. 23D 12277 Berlin Germany Phone +49 30 772051-0 Fax ++49 30 7531078 E-Mail: sales@shf.de Web: http://www.shf.de Datasheet SHF 100 BPP Broadband

More information

9W Power Amplifier 26.2GHz~34GHz

9W Power Amplifier 26.2GHz~34GHz 9W Power Amplifier 26.2GHz~34GHz High output power > +39.5 dbm Aerospace and military application High Peak to average handle capability High Linearity and low noise figure All specifications can be modified

More information

CHA2159 RoHS COMPLIANT

CHA2159 RoHS COMPLIANT RoHS COMPLIANT 55-65GHz Low Noise / Medium Power Amplifier GaAs Monolithic Microwave IC Description The CHA2159 is a four - stage low noise and medium power amplifier. It is designed for a wide range of

More information

Cascadable Broadband InGaP MMIC Amplifier

Cascadable Broadband InGaP MMIC Amplifier Cascadable Broadband InGaP MMIC Amplifier DC-14 GHz Description AKA-1500GN Akoustis AKA-1500GN cascadable broadband InGaP HBT MMIC amplifier is a low-cost high-performance solution for your general-purpose

More information

HMC639ST89 / 639ST89E

HMC639ST89 / 639ST89E Typical Applications The HMC39ST9(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Functional Diagram Electrical Specifications,

More information

OBSOLETE HMC5846LS6 AMPLIFIERS - LINEAR & POWER - SMT. Electrical Specifications, T A. Features. Typical Applications. General Description

OBSOLETE HMC5846LS6 AMPLIFIERS - LINEAR & POWER - SMT. Electrical Specifications, T A. Features. Typical Applications. General Description v1.414 Typical Applications The HMC846LS6 is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Military & Space Functional Diagram Electrical Specifications, T A = +2 C Vdd = Vdd1,

More information

80-105GHz Balanced Low Noise Amplifier. GaAs Monolithic Microwave IC. Gain & NF (db)

80-105GHz Balanced Low Noise Amplifier. GaAs Monolithic Microwave IC. Gain & NF (db) Gain & NF (db) GaAs Monolithic Microwave IC Description The is a broadband, balanced, four-stage monolithic low noise amplifier. It is designed for Millimeter-Wave Imaging applications and can be use in

More information

SHF Communication Technologies AG

SHF Communication Technologies AG SHF Communication Technologies AG Wilhelm-von-Siemens-Str. 23 Aufgang D 12277 Berlin Marienfelde Germany Phone ++49 / 772 05 10 Fax ++49 / 753 10 78 E-Mail: sales@shf.biz Web: http://www.shf.biz Datasheet

More information

Data Sheet. AMMP GHz High Gain Amplifier in SMT Package. Description. Features. Applications. Package Diagram. Functional Block Diagram

Data Sheet. AMMP GHz High Gain Amplifier in SMT Package. Description. Features. Applications. Package Diagram. Functional Block Diagram AMMP- GHz High Gain Amplifier in SMT Package Data Sheet Description The AMMP- MMIC is a GaAs wide-band amplifier in a surface mount package designed for medium output power and high gain over the - GHz

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.414 Typical Applications The HMC5846LS6

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS LEADER OF RF BROADBAND SOLTIONS ltra Wide Band Low Noise Amplifier.~ Electrical Specifications, TA = ⁰C, Vcc = V Parameters Min. Typ. Max. Min. Typ. Max. nits Frequency Range... Gain Gain Flatness ±. ±.

More information

CTT Technical Proposal

CTT Technical Proposal CTT Technical Proposal 6-1 GHz 0 W Power Amplifier (GaAs and GaN approaches) SECTION 1: 6-1 GHz 0 W power amplifiers A) Specification and comparison SECTION 2: GaAs 6-1 GHz Solid State Power Amplifier

More information

Features. = +25 C, Vdc = +12V

Features. = +25 C, Vdc = +12V Typical Applications The VCO Module is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Lab Instrumentation Functional Diagram Electrical Specifications, T

More information

Test & Measurement Instrument Amplifiers

Test & Measurement Instrument Amplifiers Test & Measurement Instrument Amplifiers DATA SHEET / 4T-101 MODELS: MPA-0G7-6G-16 MPA-0G7-6G-50 MPA-2G-6G-20 MPA-2G-6G-50 MPA-2G-18G-16 MPA-2G-18G-30 MPA-6G-18G-5 MPA-6G-18G-20 MPA-6G-18G-50 MPA-8G-12G-30

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS LEADER OF RF BROADBAND SOLTIONS Low Noise Amplifier.~. RLNAGG Electrical Specifications, TA = + C, Vcc = +V Features Gain: Typical Noise Figure:. Typical P Output Power: + m Typical Supply Voltage: + V

More information

SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated

SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated RF Connectors Technical Data Sheet PE45145 Configuration SMA Male Connector 50 Ohms Straight Body Geometry RG174, RG316, RG188

More information

Features. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz

Features. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz Typical Applications The HMC62LP / HMC62LPE Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features

More information

ASL 1005P3 Data Sheet Rev: 1.0 Apr 2017

ASL 1005P3 Data Sheet Rev: 1.0 Apr 2017 ASL P3 Rev:. Apr 27.8 4 GHz Frequency Tunable Ultra Low Noise Amplifier Features Frequency Range:.8-4 GHz.7 db typ. NF Tunable Noise match 2 db 4dBm Nominal PdB On-chip DC Blocks -7mA Tunable Bias current.-um

More information

Preliminary DATA SHEET VWA Product-Line

Preliminary DATA SHEET VWA Product-Line VWA 5000063 AA Double TIA 2.9-3.4GHz/3.7-4.3GHz ZT>350 Ohms Features Description The VWA 5000063 AA is a double transimpedance amplifier designed on a 0.15 µm phemt process. The two embedded devices are

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC32LC Typical Applications

More information