SA18N-20 DATA SHEET. 20 db Fixed Attenuator N Male To N Female Up To 18 GHz Rated To 2 Watts With Passivated Stainless Steel Body.
|
|
|
- Everett Parrish
- 6 years ago
- Views:
Transcription
1 20 db Fixed Attenuator N Male To N Female Up To 18 GHz Rated To 2 Watts With Passivated Stainless Steel Body Fairview Microwave carries a broad selection of fixed attenuators with a wide range of attenuation levels, frequency ranges, and power dissipation ranges. Also known as RF pads, RF microwave attenuators lower the amplitude of a signal (or attenuate) a known amount. These attenuator pads can be used in a wide variety of applications including reducing a signal level to protect measurement equipment or other circuitry, extending the range of power meters and amplifiers, and impedance matching circuits by reducing the VSWR seen by adjacent components. RF attenuators can prevent signal overload in amplifiers, receivers and detectors, adjusting the signal level to a range that is optimal. Few RF components are as commonly used as fixed coaxial attenuators, and Fairview Microwave carries one of the largest in-stock selections and ships them same day. The SA18N-20 is a 20 db Fixed Attenuator that operates from DC to 18 GHz and is rated to 2 Watts. The versatile coaxial package uses N male to N female connectors and is also REACH and RoHS compliant. Electrical Specifications Description Min Typ Max Units Features: DC to 18 GHz Frequency Range Attenuation 20±1.5 db Max Power 2 Watts (CW) VSWR < 1.5:1 Applications: Instrumentation Precision measurements Prototyping and characterization Production systems Frequency Range DC 18 GHz Impedance 50 Ohms Nominal Attenuation 20 db Attenuation Accuracy ±1.5 db VSWR 1.5:1 RF Leakage dbc Input Power, CW 2 Watts derated linearly to 0.2W at +125 C Input Power, Peak 500 Watts 5µs pulse, 0.05% duty cycle Specifications by Frequency Description F1 F2 F3 F4 F5 Units Range DC to 8 8 to 18 GHz VSWR, Max 1.3:1 1.5:1 Mechanical Specifications Size Length 1.76 in [44.7 mm] Width/Diameter 0.82 in [20.83 mm]. Weight lbs [59.42 g] Body Material and Plating Passivated Stainless Steel Configuration Design Package Style Fixed Connectorized Module Fairview Microwave 1130 Junction Dr. #100 Allen, TX Tel: / (972) Fax: (972) sales@fairviewmicrowave.com REV 3.3 Page 1 of 5 Copyright 2016
2 Connectors Description Connector 1 Connector 2. Type N Male N Female Connection Method Standard Standard Polarity Standard Standard Connector Spec. MIL-SDT-348 MIL-SDT-348 Contact Material & Plating Beryllium Copper, Gold Beryllium Copper, Gold Dielectric Type Teflon Teflon Body Material & Plating Passivated Stainless Steel Passivated Stainless Steel... Mechanical Specification Notes: Materials and finishes comply with MIL-DTL Environmental Specifications Temperature Operating Range -65 to +125 deg C Environmental Specification Notes: Designed to meet environmental requirements of MIL-DTL Compliance Certifications (visit for current document) RoHS Compliant Yes REACH Compliant 12/17/2015 Plotted and Other Data Notes: REV 3.3 Page 2 of 5
3 Typical Performance Data 0 Return Loss db S11-50 S Freq (GHz) -17 Attenuation db Freq (GHz) REV 3.3 Page 3 of 5
4 20 db Fixed Attenuator N Male To N Female Up To 18 GHz Rated To 2 Watts With Passivated Stainless Steel Body from Fairview Microwave is in-stock and available to ship same-day. All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Allen, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: 20 db Fixed Attenuator N Male To N Female Up To 18 GHz Rated To 2 Watts With Passivated Stainless Steel Body SA18N-20 URL: REV 3.3 Page 4 of 5
5 20 db Fixed Attenuator N Male To N Female Up To 18 GHz Rated To 2 Watts With Passivated Stainless Steel Body REV 3.3 Page 5 of 5
SA26B-10 DATA SHEET. 10 db Fixed Attenuator SMA Male To SMA Female Up To 26 GHz Rated To 2 Watts With Passivated Stainless Steel Body.
10 db Fixed Attenuator SMA Male To SMA Female Up To 26 GHz Rated To 2 Watts With Passivated Stainless Steel Body Fairview Microwave carries a broad selection of fixed attenuators with a wide range of attenuation
FMSW6097 DATA SHEET. SPDT Failsafe Electro-Mechanical Relay Switch From DC to 26.5 GHz, 20 Watts with TTL, Diodes, Indicators, SMA.
SPDT Failsafe Electro-Mechanical Relay Switch From DC to 26.5 GHz, 20 Watts with TTL, Diodes, Indicators, SMA The FMSW6097 is an SPDT Electromechanical Relay Switch that operates over a wide frequency
FMSW6129 DATA SHEET. SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA.
SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA The FMSW6129 is an SP4T Electromechanical Relay Switch that operates over a wide frequency
FMSW6124 DATA SHEET. Transfer Latching Electro-Mechanical Relay Switch From DC to 40 GHz, 5 Watts with Indicators, TTL, Self Cut Off, Diodes, 2.
Transfer Latching Electro-Mechanical Relay Switch From DC to 40 GHz, 5 Watts with Indicators, TTL, Self Cut Off, Diodes, 2.92mm The FMSW6124 is a Transfer Electromechanical Relay Switch that operates over
SEMS-4079-SP8T-SMA DATA SHEET
SP8T Latching Electro-Mechanical Relay Switch From DC to 18 GHz, 100 Watts with Self Cut Off, Auto Reset, Indicators, Diodes, SMA The SEMS-4079-SP8T-SMA is an SP8T Terminated Electromechanical Relay Switch
SDA SMA DATA SHEET
0 to 60 db 10 Bit Programmable TTL Controlled Step Attenuator With a 006 db Step SMA Female To SMA Female From 500 MHz To 18 GHz The is a Non-Reflective 10 Bit Programmable 60 db Pin Diode Attenuator with
FMSN3902 DATA SHEET. USB Frequency Synthesizer PLL (Phase Locked Loop), Operating From 5 GHz to 10 GHz With SMA Output. Features: Applications:
USB Frequency Synthesizer PLL (Phase Locked Loop), Operating From 5 GHz to 10 GHz With SMA Output FMSN3902 is a Frequency Synthesizer Module that covers a wide frequency band from 5 GHz to 10 GHz with
SPA SMA DATA SHEET
43 db Gain Medium Power High Gain Amplifier at 3 Watt P1dB Operating From 14.4 GHz to 15.4 GHz with 41 dbm IP3 and SMA SPA-154-43-03-SMA is a 3 Watt Ku Band high gain power coaxial amplifier operating
SLA SMA DATA SHEET
SLA-6-8-4-SMA 8 Gain Limiting Amplifier Operating From 2 GHz to 6 GHz with -61 to 1 Pin, 1 Psat and SMA The SLA-6-8-4-SMA is a 2 to 6 GHz high gain wide-band coaxial limiting amplifier. The model operates
SC6015 DATA SHEET. BNC Female Bulkhead Connector Crimp/Solder Attachment For.100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100-FR Cable
BNC Female Bulkhead Connector Crimp/Solder Attachment For 100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100-FR Cable BNC female bulkhead connector with crimp/solder attachment for 100 inch, RG316,
FMAM1035 DATA SHEET. 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA. Features: Applications:
FMAM13 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA The FMAM13 is a low phase noise amplifier that operates across the frequency range from 3 GHz
FMMX9003 DATA SHEET. Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm.
FMMX93 Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm FMMX93 is an I/Q double balanced millimeter-wave mixer module that operates across
FMAM4032 DATA SHEET. 10 MHz to 6 GHz, Medium Power Broadband Amplifier with 900 mw, 24 db Gain and SMA. Features: Applications:
FMAM432 1 MHz to 6 GHz, Medium Power Broadband Amplifier with 9 mw, 24 db Gain and SMA FMAM432 two stage amplifier operates across a wide frequency range from 1 MHz to 6 GHz The design utilizes GaAs PHEMT
FMAM5032 DATA SHEET. 48 db Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 dbm IP3 and SMA.
48 Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 m IP3 and SMA FMAM5032 is a high gain Class A/AB GaN Linear Power Amplifier operating in the 500 to 3000 MHz
FMPB1002 DATA SHEET. Coaxial RF GS Probe with 800 Micron Pitch Up to 20 GHz with 3.5mm Interface and Cable Mount. Configuration: Features:
Coaxial RF GS Probe with 800 Micron Pitch Up to 20 GHz with 3.5mm Interface and Cable Mount Coaxial RF GS probe, part number FMPB1002, from Fairview Microwave is in-stock and ships same day. This probe
RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].
![RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].](/thumbs/90/101629325.jpg "RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].")
RP SMA Male Connector Solder Attachment for PE-SR402AL, PE-SR402FL, PE-SR402FLJ, PE- SR402TN, RG402, Gold Plated Brass Body RF Connectors Technical Data Sheet PE44724 Configuration SMA Male Reverse Polarity
SMA Male QD Connector Crimp/Solder Attachment For RG142, RG223, RG400, RG55
SMA Male QD Connector Crimp/Solder Attachment For RG142, RG223, RG400, RG55 RF Connectors Technical Data Sheet Configuration SMA Male Connector 50 Ohms Straight Body Geometry RG142, RG223, RG400, RG55
QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400
QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400 RF Connectors Technical Data Sheet PE44978 Configuration QN Male Connector 50 Ohms Straight Body Geometry Features Max Operating
High-Reliability and Environment Qualified Components
High-Reliability and Environment Qualified Components Introduction Ruggedness and reliability have been designed in across our product lines and proven in the field. This section of our catalog provides
SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, inch
SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, 0195 inch RF Connectors Technical Data Sheet PE4215 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight
HN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
HN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4474 Configuration HN Male Connector MIL-STD-348A 50 Ohms Features Max Operating Frequency 3
TNC Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
TNC Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4447 Configuration TNC Male Connector MIL-STD-348A 50 Ohms Features Max Operating Frequency
Cable Attachment Method (Shield/Contact) Size Length, in [mm] 0.98 [24.89] Width/Dia., in [mm] [9.53]. Weight, lbs [g] 0.02 [9.07] 3.
![Cable Attachment Method (Shield/Contact) Size Length, in [mm] 0.98 [24.89] Width/Dia., in [mm] [9.53]. Weight, lbs [g] 0.02 [9.07] 3.](/thumbs/94/121044667.jpg "Cable Attachment Method (Shield/Contact) Size Length, in [mm] 0.98 [24.89] Width/Dia., in [mm] [9.53]. Weight, lbs [g] 0.02 [9.07] 3.")
Configuration Interface Type Cable Attachment Method (Shield/Contact) Body Style PE-SR402AL,PE-SR402FL,RG402 Clamp/Solder Straight Electrical Specifications Impedance, Ohms 50 Mechanical Specifications
RP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402
RP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402 RF Connectors Technical Data Sheet PE4790 Configuration SMA Male Reverse Polarity Connector MIL-STD-348 50 Ohms Right
7/16 DIN Male Connector Clamp/Solder Attachment for RG213, RG55, RG141, RG142, RG223, RG400, RG303, PE-C195, PE-P195, LMR-195
7/16 DIN Male Connector Clamp/Solder Attachment for RG213, RG55, RG141, RG142, RG223, RG400, RG303, PE-C195, PE-P195, LMR-195 RF Connectors Technical Data Sheet PE4567 Configuration 7/16 DIN Male Connector
N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Annular, 1/2 inch Flexible, PE-1/2FAC. Cable Attachment Method (Shield/Contact)
N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Annular, 1/2 inch Flexible, PE-1/2FAC TECHNICAL DATA SHEET N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Annular, 1/2
RESISTIVE POWER SPLITTERS AND DIVIDERS
RESISTIVE POWER SPLITTERS AND DIVIDERS DC 40.0 GHz S Resistive Power Splitters Usage: : Use in RF and wireless applications where one of the two outputs are included in a leveling loop or used as a reference
Coaxial Line Stretchers
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Mini Circuits SMA Attenuators
Mini Circuits 15542 SMA Attenuators For rugged, reliable, and repeatable attenuation when accuracy is key, our customers have come to rely on Mini Circuits Fixed. Precision Attenuators. They feature stainless
SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, inch
SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, 0100 inch RF Connectors Technical Data Sheet PE4046 Configuration SMB Plug Connector MIL-STD-348A 50 Ohms
ATTENUATORS FIXED COAXIAL
ATTENUATORS FIXED COAXIAL SV Microwave manufactures a complete line of standard and custom-designed attenuators, including QPL and Hi-Rel versions. A variety of connector configurations are available,
Typical Performance Curves
Coaxial SMA Fixed Attenuator 50Ω 1W 3dB DC to 6000 MHz Maximum Ratings Operating Temperature -45 C to 100 C Storage Temperature -55 C to 100 C Permanent damage may occur if any of these limits are exceeded.
SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated
SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated RF Connectors Technical Data Sheet PE45145 Configuration SMA Male Connector 50 Ohms Straight Body Geometry RG174, RG316, RG188
7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4571 Configuration 7/16 DIN Male Connector IEC 169-4 50 Ohms Straight Body Geometry Features
N Male Connector Clamp/Solder Attachment for RG17, RG218, RG219
N Male Connector Clamp/Solder Attachment for RG17, RG218, RG219 RF Connectors Technical Data Sheet PE4433 Configuration N Male Connector MIL-STD-348 50 Ohms Features Silver Plated Contact Applications
Frequency Divider, Divide by 2 Prescaler Module, 500 MHz to 18 GHz, Field Replaceable SMA
Features Divide by 2 Prescaler Wide Frequency Band GaAs HBT MMIC Technology Low Phase Noise -15 dbc/hz @ 1 khz offset Output Power -4 dbm Low Reverse Leakage Level 55 db typical Applications Electronic
2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
Coaxial Line Stretchers
Coaxial Line Stretchers Frequency range (Note) Maximum Input NOTE: The frequency range will depend on the model. 1.Vibration 2.Shock DC to 10.0 GHz 50 W These coaxial line stretchers maintain an impedance
TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, inch, PE-B100, PE-C100, LMR-100
TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, 0100 inch, PE-B100, PE-C100, LMR-100 RF Connectors Technical Data Sheet PE4455 Configuration TNC Male Connector 50 Ohms
7/16 DIN Male Right Angle Connector Clamp/Solder Attachment for RG213, RG214, RG8, RG9, RG225, RG393, RG215
7/16 DIN Male Right Angle Connector Clamp/Solder Attachment RF Connectors Technical Data Sheet PE44280 Configuration 7/16 DIN Male Connector MIL-C-39012 50 Ohms Right Angle Body Geometry Features Silver
Couplers with Connectors (H Type)
Couplers with Connectors (H Type) Nov. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. HDH Series HDH-83GHD HDH-3GH(4) HDH-93GHD(4) Product Specifications Ratings Frequency range (Note) Characteristic
MIL-DTL-39030/3 SMA Terminations. Features & Benefits. Applications. M39030 /3-08 S or N
MIL-DTL-39030/3 SMA Terminations SV Microwave offers military SMA terminations that are 39030 approved. QPL-39030 parts are designed and made under DSCC qualifications in order to resist harsh environments
Introduction. Attenuators
Introduction Attenuators Features Lead Free, RoHS Compliant Option Available Substrates - BeO, AlN or Alumina Power Rating -.05 to 400 Watts Frequency Range DC to 6 GHz Package styles: chip, tab & cover,
RF Connectors Technical Data Sheet. Description Minimum Typical Maximum Units. Frequency Range DC 3 GHz VSWR 1.25:1 Operating Voltage (AC) 335 Vrms.
BNC Male Connector Crimp/Crimp Attachment for 100 inch, RG316, RG174, RG188, LMR-100, LMR- 100, LMR-100-FR, PE-C100, PE-B100 RF Connectors Technical Data Sheet PE45045 Configuration BNC Male Connector
Test Cable Assemblies
Test Cable Assemblies DC-65 GHz 8851 SW Old Kansas Ave. Stuart, FL 34997 USA +1-772-286-9300 +1-800-544-5594 sales@emc-rflabs.com www.emc-rflabs.com Premium Test Cable Lab-Flex 200 Frequency to 31 GHz
DC to 400 MHz (40 db Typ. Isolation up to 20 GHz)
Coaxial Low Pass Filter 5Ω DC to 4 MHz (4 db Typ. Isolation up to 2 GHz) The Big Deal Very good rejection, 4 db typ. up to 2 GHz Excellent power handling, 1W Rugged unibody construction CASE STYLE: FF1118
TVA Thermopad Series offer proven performance and significant high reliability heritage in a commercial grade product. Features and Benefits
Attenuator Temperature Variable Chip 2 Watts TVA Thermopad Series offer proven performance and significant high reliability heritage in a commercial grade product. Smiths Interconnect is the world leader
LM M-A-300 Surface Mount Pin Diode Limiter, 20 MHz 8 GHz Datasheet
LM200802-M-A-300 Surface Mount Pin Diode Limiter, 20 MHz 8 GHz Datasheet Features Broadband Performance: 20 MHz 8 GHz Surface Mount Limiter in Compact Outline: 8 mm L x 5 mm W x 2.5 mm H Incorporates NIP
Variable Attenuators (Step & Continuous)
(Step & Continuous) Wide Choice of Attenuation & Frequency Ranges. High Reliability & Long Life Rugged Construction & Connectors Rotational Stops Included on most models Low Cost Designs - Model 3033 Custom
Surface Mount Limiter, GHz
Surface Mount Limiter, 2.9 3.3 GHz LM2933-Q-B-301 Datasheet Features Surface Mount Limiter in Compact Package: 8 mm L x 5 mm W x 2.5 mm H Incorporates PIN Limiter Diodes, DC Blocks, Schottky Diode & DC
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz Low Loss Low Density PTFE Dielectric RF Microwave Coaxial Cable Silver Plated Copper
Phase Matrix, Inc. 545B 548B. Phase Matrix, Inc. EIP 545B and 548B CW Frequency Counters. Instruments You Can Count On
Phase Matrix, Inc. Instruments You Can Count On 545B 548B Phase Matrix, Inc. EIP 545B and 548B CW Frequency Counters Full Function CW Microwave Frequency Counters with Selective Power Measurement Keyboard
RP TNC Male Connector Crimp/Solder Attachment for PE-C240, RG8X, inch, LMR-240, LMR-240-DB, LMR-240-UF, B7808A
RP TNC Male Connector Crimp/Solder Attachment for PE-C240, RG8X, 0240 inch, LMR-240, LMR-240-DB, LMR-240-UF, B7808A RF Connectors Technical Data Sheet PE44670 Configuration TNC Male Reverse Polarity Connector
The GPO male interface is compliant to MIL-STD-348, and it is in accordance with MIL-PRF-39012a and DESC 94007/94008.
GPO, GPPO and G3PO Application Notes Corning Gilbert s push-on connector products allow users flexibility in modular and board layout (in high density situations), frequency bandwidths from DC to 100 GHz
N Male Connector Crimp/Solder Attachment For RG58
N Male Connector Crimp/Solder Attachment For RG58 RF Connectors Technical Data Sheet PE4329 Configuration N Male Connector 50 Ohms Straight Body Geometry RG58 Interface Type Crimp/Solder Attachment Electrical
SMT Hybrid Couplers, RF Parameters and Applications
SMT Hybrid Couplers, RF Parameters and Applications A 90 degree hybrid coupler is a four-port device used to equally split an input signal into two signals with a 90 degree phase shift between them. The
Main Features: ERZ-LNA Typical applications: Performance
Main Features: Frequency Range: 2 to 45 GHz. Typical values: Gain 15 db, NF 5 db RF connectors (I/O): 2.4 mm Solder filtered pins for DC connection Several mounting options Gold platted compact aluminum
Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20. DC Current A 1.6
AMT-A0030 2 GHz to 18 GHz 8W 41 db Gain Broadband High Power Amplifier Module Data Sheet Features 2 GHz to 18 GHz Frequency Range Typical Psat power > +39 dbm Gain 41 db High Efficiency Internally Regulated
Coaxial Fixed Attenuator
Coaxial Fixed Attenuator RF Fixed attenuator RF Fixed attenuator is a device used to reduce power levels of a signal by a fixed amount with little or no reflections. Applications Extending the dynamic
Specification for Radiated susceptibility Test
1 of 11 General Information on Radiated susceptibility test Supported frequency Range : 20MHz to 6GHz Supported Field strength : 30V/m at 3 meter distance 100V/m at 1 meter distance 2 of 11 Signal generator
WEINSCHEL ASSOCIATES
VARIABLE ATTENUATORS DC 40.0 GHz 0.3 5 WATTS Number Frequency Range (GHz) Continuously Variable Attenuators Average Power (W) Peak Power (kw) Residual Insertion Loss (db) Attenuation Range (db) Connectors
S3602A/B Vector Network Analyzer Datasheet
S3602A/B Vector Network Analyzer Datasheet Saluki Technology Inc. The document applies to the vector network analyzers of the following models: S3602A vector network analyzer (10MHz-13.5GHz). S3602B vector
Limiter Diodes Features Description Chip Dimensions Model DOT Diameter (Typ.) Chip Number St l Style Inches 4 11
Features Low Loss kw Coarse Limiters 200 Watt Midrange Limiters 10 mw Clean Up Limiters 210 20 Description Alpha has pioneered the microwave limiter diode. Because all phases of manufacturing, from design
Section / Product...Page. Company Profile...22, 23. Attenuators...2
RESISTIVE COMPONENTS Contents Section / Product....................................Page Company Profile.......................................22, 23 Attenuators..............................................2
Network Infrastructure Products for Harsh Environments
Salt Fog Qualified Products Network Infrastructure Products for Harsh Environments Network Infrastructure Products for Harsh Environments Microlab s product line for harsh outdoor applications have been
High Frequency. ECT-CPG com shop ECT-CPG com
High Frequency HiGH FreQuenCY High Frequency or Radio Frequency (RF) coaxial probes are used for testing high speed circuits in a variety of industries including automotive, wireless communications, satellite,
TERMINATIONS. SMA Plug Solderless 1 Watt* Features. SMA Plug 1 Watt* SMA Plug 1 Watt*
SV Microwave manufactures a complete line of standard and custom-designed terminations, including QPL and Hi-Rel versions. A variety of connector configurations are available, including: SMA, SVK 2.92mm,
RFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes
Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight
Features 100A400AM20. 4kHz 400MHz Class A Portable Full VSWR tolerant CE & RoHS compliant High Efficiency
Specifications Class A Portable Full VSWR tolerant CE & RoHS compliant High Efficiency Features The Model is a solid-state, self -contained, air-cooled, broadband amplifier designed for applications requiring
High Power RF/Microwave Transistors, Pallets and Amplifiers from Integra Technologies, Inc.
Page 1 of 6 High Power RF/Microwave Transistors, Pallets and Amplifiers from Integra Technologies, Inc. By Apet Bersegyan ABSTRACT Integra Technologies, Inc. is engaged in design and manufacturing of High
Times Microwave Systems Hermetically Sealed Assemblies
SCOPE This Specification details the Electrical, Mechanical and Environmental Characteristics of Times Microwave Systems MILTECH 480.48 Diameter Hermetically Sealed Coaxial Transmission Lines. This product
FEATURES. Maximizer Gold. Larger solid SPC center conductor than standard solid PTFE semi-rigid cables. Maximizer Silver
MAXIMIZER HIGH PERFORMANCE SEMI-RIGID Extend your system s performance with Storm s MAXIMIZER line of cable products. For the most demanding applications, phase stable low loss Maximizer Gold products
CSP-03G-003 High-Frequency Coaxial Test & Measurement Probe Model Number: CSP-03G-003, Replacement Probe: SPL-03G-043, SPL-03B-121 Target Connector: CPT-03-50-2 Applications: Designed for use in interconnect
S3602C Vector Network Analyzer Datasheet
S3602C Vector Network Analyzer Datasheet Saluki Technology Inc. The document applies to the vector network analyzers of the following models: S3602C vector network analyzer (10MHz - 43.5GHz). Options of
TRUtest Specifications. Electrical. Mechanical. Environmental. Requirement. Detail. 1.35:1 maximum. 0.4 db/ft GHz
TRUtest Series TRUtest Series cable assemblies combine MIL-standard test-grade interfaces with flexible and durable cable construction to provide repeatable, reliable performance and long service life.
FEATURES. Maximizer Gold ~ Larger solid SPC center conductor than standard solid PTFE semi-rigid cables
MAXIMIZER HIGH PERFORMANCE SEMI-RIGID Extend your system s performance with Storm s MAXIMIZER line of cable products. For the most demanding applications, phase stable low loss Maximizer Gold products
Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Non-reflective Terminations (BNC) BNC-TM Series BNC-TMP-05(43) BNC-TMJ-05(42) BNC-TMP-05-2(42) BNC-TMJ-05-2(42) BNC-TMP-05-1(41) BNC-TMJ-05-1(41) BNC-TMP-05(75)(40) BNC-TMJ-05(75)(40) BNC-TMP-1(42) Product
... A Vital Part of Connection World CMPTER. 1.85mm Connector Applycation Receptacles With Accepts Pin
... A Vital Part of Connection World 1.85mm Connector Applycation Receptacles With Accepts Pin COPYRIGHT ELECTRONICS 2014 1.85mm Precision Connectors DESCRIPTION The 1.85mm connector are 50 ohm precision
Manufacturers of RF and Microwave Components and Assemblies Specialist in RF Filters, Power amplifiers and RF Switches
Manufacturers of RF and Microwave Components and Assemblies Specialist in RF Filters, Power amplifiers and RF Switches sales@cormic.com www.cormic.com P 724.940.7556 F 724.940.7707 RF & MICROWAVE FILTERS
242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
TT9 SMT Series. Attenuator Chip 500 Milliwatts
Attenuator Chip 500 Milliwatts TT9 SMT Series Attenuator Chip 500 Milliwatts TT9 SMT Series, specifically designed for surface mount broadband applications which require more power. Smiths Interconnect
Thermopad. Introduction
Introduction Thermopad Features Lead Free Option Available Impedance 50 and 75 Ohms Frequency Ranges from DC to 46 GHz Attenuation Values from 1 to 10 db Wire Bondable Connections Available Negative and
100U1000. Features. 100 watts CW 100kHz 1000MHz Class A Portable Full VSWR tolerant CE & RoHS Compliant High Efficiency
Specifications 100U1000 Class A Portable Full VSWR tolerant CE & RoHS Compliant High Efficiency Features The Model 100U1000 is a solid-state, selfcontained, air-cooled, broadband amplifier designed for
EACON. Field mountable microwave cable. INEXIM Sp. z o.o. Edition Bezpośredni importer i dystrybutor
EACON Field mountable microwave cable Edition 2012 Bezpośredni importer i dystrybutor INEXIM Sp. z o.o. www.inexim.pl Easy connected EACON - the field mountable cable assembly 4 EACON 4C 6 Suitable to
SMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
N Male Connector Clamp/Solder Attachment for PE-C500, LMR-500
N Male Connector Clamp/Solder Attachment for PE-C500, LMR-500 RF Connectors Technical Data Sheet PE44046 Configuration N Male Connector MIL-STD-348A 50 Ohms Features Gold Plated Brass Contact Applications
SMA Description Applications Features
MCX SMA Description SMA connectors are adaptable to interconnection requirements of both systems and components.s - Corm offers a wide variety of cable connectors,receptacles, feed thrus, end launches,
TECHNICAL INFORMATION
TECHNICAL INFORMATION TECHNOLOGY Y-Junction circulator PORT 1 PORT 2 PORT 3 FIG. 1 The Y-junction circulator uses spinel ferrites or garnet ferrites in the presence of a magnetic bias field, to provide
VXIbus Local Oscillator
20309 Phase Matrix, Inc ṬM Instruments You Can Count On VXIbus Local Oscillator High-Performance Microwave Local Oscillator Generation for VXIbus Systems 3 to 9 GHz Frequency Range Multi-Stage Downconversion
SMA Self-Fixture End Launch Connectors
SMA Self-Fixture End Launch Connectors INTRODUCTION / APPLICATIONS Applications for these connectors include: An ideal solution for design engineers who are obligated to cut manufacturing costs and complexity
QPA1019S GHz 10W GaN Power Amplifier
QPA119 4.5 7. GHz 1 W GaN Power Amplifier Product Overview Qorvo s QPA119 is a packaged high-power, C-band amplifier fabricated on Qorvo s production.15 um GaN on SiC process (QGaN15). Covering 4.5 7.
Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +10
AMT-A0112 11 GHz to 18 GHz Broadband Low Noise Amplifier Data Sheet Features 11 GHz to 18 GHz Frequency Range Typical Noise Figure < 1.4 db Typical Gain 40 db Gain Flatness < ± 2 db +14 dbm P1dB Internally
QPA GHz 50 Watt GaN Amplifier
QPA1 2.8 3.2 GHz Watt GaN Amplifier Product Description Qorvo s QPA1 is a high-power, S-band amplifier fabricated on Qorvo s QGaN.um GaN on SiC production process. Covering 2.8-3.2 GHz, the QPA1 typically
= 25 C) Parameter 1.0 GHz 2.0 GHz 3.0 GHz 4.0 GHz 5.0 GHz 6.0 GHz Units. Gain db. 32 dbm W
CMPA006005D 5 W, 0 MHz - 6.0 GHz, GaN MMIC, Power Amplifier Cree s CMPA006005D is a gallium nitride (GaN) High Electron Mobility Transistor (HEMT) based monolithic microwave integrated circuit (MMIC).
Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20
AMT-A0119 0.8 GHz to 3 GHz Broadband High Power Amplifier W P1dB Data Sheet Features 0.8 GHz to 3GHz Frequency Range Class AB, High Linearity Gain db min 55 db Typical Gain Flatness < ± 1.2 db Typical
DC to 3.5-GHz Amplified Photoreceivers Models 1591 & 1592
USER S GUIDE DC to 3.5-GHz Amplified Photoreceivers Models 1591 & 1592 These photoreceivers are sensitive to electrostatic discharges and could be permanently damaged if subjected even to small discharges.
Model C0810J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler
Model C81J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C81J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It
SMA 50 Ohm Connectors Alphabetical Index INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
SMA 50 Ohm Connectors Alphabetical Index SMA Connectors - 50 Ohm Bulkhead Mount... 20 Custom Feedthroughs... 48 Dummy Loads... 37 End Launch... 16 Field Replaceable... 28 Flexible Cable... 8 In-Series
Frequency Range: MHz. Efficiency: 80% Temperature Range: -20 to 65 C Max VSWR: 3:1. Class: Supply Voltage: 32.0V
Part Number Revision 0.B Release Date October 19, 2007 Revision Notes Final production release Amplifier Name Technical Specifications Summary Frequency Range: 86-108 MHz P1dB: 500 Watts CW Class: C Supply
SERIES YL-N DIVIDERS/COMBINER, POWER IN-PHASE 2-WAY SMA & TYPE N GHz ELECTRICAL PERFORMANCE MECHANICAL OUTLINES GENERAL SPECIFICATIONS
IN-PHASE 2-WAY & TYPE N DIVIDERS/COMBINER, POWER 0.5-18 GHz GENERAL SPECIFICATIONS RF Impedance: 0.5-18.0 GHz 50 Ohms The power handling capability for load VSWR s less than 1 is 1 watt CW and 1kW peak