RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

Size: px
Start display at page:

Download "RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS"

Transcription

1 LEADER OF RF BROADBAND SOLTIONS ltra Wide Band Low Noise Amplifier.~ Electrical Specifications, TA = ⁰C, Vcc = V Parameters Min. Typ. Max. Min. Typ. Max. nits Frequency Range... Gain Gain Flatness ±. ±. Gain Variation Over Temperature(- to ) ±. ±. Noise Figure.... Input VSWR.. : Output VSWR.. : Output Compression Point (P) m Saturated Output Power (Psat) m Output Third Order Intercept (IP) m Supply Current (Vdd=V) ma Isolation S Weight. Ounces Impedance Ohms Input / Output Connectors Finish Material Package Sealing Features Gain: Typical Noise Figure:. Typical P Output Power: m Typical Supply Voltage: V Ohm Matched Typical Applications Wireless Infrastructure RF Microwave & VSAT Military & Aerospace Test Instrument Fiber Optics SMA-Female Standard: Gold micron; Nickel micron thickness Option: Gold micron; Nickel micron thickness Aluminum Epoxy Sealing (Standard) Hermetically Sealed (Optional) ltra Wide Band Low Noise Amplifier.~ SA

2 LEADER OF RF BROADBAND SOLTIONS Absolute Maximum Ratings Operating Voltage.V RF Input Power m Biasing p Procedure Step Connect Ground Pin Step Connect input and output Step Connect V biasing Power OFF Procedure Step Turn off V biasing Step Remove RF connection Step Remove Ground. Typical Performance Plots Trc S Mag / Ref (Max) S Ch fb Start //, : AM Environmental Specifications Operational Temperature ( C) Storage Temperature ( C) Altitude Vibration - to - to, ft. (Epoxy Sealed Controlled environment), ft..psi min (Hermetically Sealed ncontrolled environment) (Optional) g RMS ( degrees KHz) endurance, hour per axis Humidity % RH at c, %RH at ºc Shock Input Trc S SWR / Ref S Ch fb Start //, : AM G for msec half sine wave, axis both directions... (Max)... ltra Wide Band Low Noise Amplifier.~ Output Trc S SWR / Ref S... (Max)... Trc S Mag / Ref S (Max) Ch fb Start Ch fb Start //, : AM //, : AM SA

3 LEADER OF RF BROADBAND SOLTIONS Input Trc S Mag / Ref S... (Max)... Trc S SWR / Ref S... (Max)... - Ch fb Start //, : AM Output Trc S SWR / Ref S Ch fb Start //, : AM Trc S Mag / Ref S - Ch fb Start (Max) (Max) Ch fb Start //, : AM Trc S Mag / Ref S Ch fb Start //, : AM Input Trc S SWR / Ref S Ch fb Start (Max) (Max)... ltra Wide Band Low Noise Amplifier.~ //, : AM //, : AM Output Trc S SWR / Ref S... (Max)... Trc S Mag / Ref S (Max) Ch fb Start Ch fb Start //, : AM //, : AM SA

4 th Harmonic Wave(c) nd Harmonic Wave(c) rd Harmonic Wave(c) OIP(m) Gain() P(m) LEADER OF RF BROADBAND SOLTIONS Gain vs. Output Power.... Gain vs. Output Power P vs. Frequency P vs. Frequency Output Power(m) Output Third Order Intercept (IP) nd Harmonic Wave Output Power nd Harmonic Wave vs. Output Power.... OIP vs. Frequency.... Frequency() - Output Power(m).... Frequency() Noise Figure rd Harmonic Wave Output Power rd Harmonic Wave vs. Output Power Output Power(m) ltra Wide Band Low Noise Amplifier.~ th Harmonic Wave Output Power - - th Harmonic Wave vs. Output Power Output Power(m) SA

5 . [.] [.] [.] [.]. [.]. [.]. [.] [.] [.] LEADER OF RF BROADBAND SOLTIONS Outline Drawing: All Dimensions in mm [inches] [.]. [.] [.] Heat Sink required during operation (Sold Separately) Ordering Information RF-Lambda IN F:.- OT SN:XXXXXXXXXXX [.] [.] V GND -.[.] THR -.[.] THR [.] V GND RF-Lambda IN F:.- OT SN:XXXXXXXXXXX Including Heat sink [.]. [.] ltra Wide Band Low Noise Amplifier.~ Part No. ECCN Description EAR.- Low Noise Amplifier Important Notice The information contained herein is believed to be reliable. RF-Lambda makes no warranties regarding the information contained herein. RF-Lambda assumes no responsibility or liability whatsoever for any of the information contained herein. RF-Lambda assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for RF-Lambda products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. RF-Lambda products are not warranted or authorized for use as critical components in medical, life-saving, or life sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. SA

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS LEADER OF RF BROADBAND SOLTIONS Wideband Low Noise Amplifier.~ RLNAMGB Features Gain: Typical Noise Figure:. Typical Output P: m Typical Supply Voltage: V Ohm Matched Electrical Specifications, TA = ⁰C,

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Wide Band Power Amplifier.~ Electrical Specifications, TA = ⁰C, Vcc = V Features Gain: Typical Noise Figure:. Typical Output P: m Typical Supply Voltage: V Ohm Matched Typical Applications Wireless Infrastructure

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS LEADER OF RF BROADBAND SOLTIONS Wideband Solid State Power Amplifier - Features Gain: typical Output power +m typical High P: + m Full Band Supply Voltage: +V Ohm Matched RFLPAGGA Electrical Specifications,

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS RF-LAMBDA LEADER OF RF BROADBAND SOLTIONS RPNAGGA W Front Over Drive Protected LNA ltra Wide Band Low Noise Amplifier ~ Electrical Specifications, TA = ⁰C, Vcc = V Features Gain: Typical Noise Figure:.

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS LEADER OF RF BROADBAND SOLTIONS Low Noise Amplifier.~. RLNAGG Electrical Specifications, TA = + C, Vcc = +V Features Gain: Typical Noise Figure:. Typical P Output Power: + m Typical Supply Voltage: + V

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Electrical Specifications, TA =, Vcc = V ltra Wide Band Low Noise Amplifier.~ Features Gain: Typical Noise Figure:. Typical Output power m typical High P: m Full Band Supply Voltage: V Parameter in. Typ.

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Wide Band Power Amplifier 18~45 Features Gain: 35 typical Output power +26m typical High P1: +24 m Full Band Supply Voltage: +12V 50 Ohm Matched Input / Output The photo is only to show the package type.

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS LEADER OF RF BROADBAND SOLTIONS RVPT88GBC Voltage Control Phase Shifter 8-8 Electrical Specifications, TA = +25 C Description Features Wide Band Operation 8-8 Phase Shift Low Insertion Loss and Low Singe

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Ultra Wide Band Low Noise Amplifier 0.01GHz~10GHz Electrical Specifications, TA = 25, Vcc = 12V Features Gain: 28dB Typical Noise Figure: 2.5dB Typical High P1dB: 15dBm Typical Supply Voltage: 12V Parameter

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS LEADER OF RF BROADBAND SOLTIONS Absorptive Coaxial SP2T Switch.2 ~ Features Wide Band Operation.2- TTL compatible driver included Fast Switching Speed Low Insertion Loss and High Isolation Customization

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Ultra Wide Band Power Amplifier 0.7GHz ~ 6GHz Features Gain: 35dB typical Output power 38dBm typical High P1dB: 35 dbm Full Band Supply Voltage: 28V 50 Ohm Matched Electrical Specifications, T A = 25⁰C,

More information

Parameter Min. Typ. Max. Min. Typ. Max. Units

Parameter Min. Typ. Max. Min. Typ. Max. Units Electrical Specifications, TA = 25 C, With Vcc = 12V, 50 Ohm System Feature Gain: 36 db Noise Figure: 3.0dB P1dB Output Power: 10dB m full band Supply Voltage: 12V @185mA 50 Ohm Matched Input / Output

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS LEADER OF RF BROADBAND SOLTIONS Absorptive Coaxial SPST Switch - RFSPSTAG Features Wide Band Operation - TTL compatible driver included Fast Switching Speed Low Insertion Loss and High Isolation Electrical

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS LEADER OF RF BROADBAND SOLTIONS Absorptive Coaxial SP8T Switch. -. RFSP8TAG Electrical Specifications, TA = + C, Vdd = +V/-V, TTL = / +V Description Features ltra Wide Band Operation.-. TTL compatible

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Reflective Coaxial SP2T Switch DC - 6 Electrical Specifications, TA = +25 C, Vcc +5V, TTL= 0 / +5V Description Features Wide Band Operation DC-6 TTL compatible driver included Fast Switching Speed Low

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Ultra Wide Band Low Noise Amplifier 0.01GHz~30GHz Electrical Specifications, TA = 25⁰C Features Gain: 36 Typical Noise Figure: 3.5 Typical P1 Output Power: 28m Typical Supply Voltage: AC110V~220V Typical

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Ultra Wide Band Low Noise Amplifier AC 1V/2V 0.0~ Electrical Specifications, T A =2 Parameters Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.01 1 1 3 GHz Gain 33 36 33 36 db Gain Flatness ±1. ±1.0

More information

Isolation db Input VSWR : 1 Output VSWR : 1 RF Input Power (Pulsed, 10% Duty Cycle, 20us pulse

Isolation db Input VSWR : 1 Output VSWR : 1 RF Input Power (Pulsed, 10% Duty Cycle, 20us pulse LEADER OF RF BROADBAND SOLTIONS Reflective Coaxial SP2T Switch.5-6 Electrical Specifications, T A = +25 C, Vdd = +5V, TTL = / +5V Description PN: SP2T Reflective Switch High Power Cold Switching Parameter

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Absorptive Voltage Controlled Attenuator 4-8GHz Features Wide Band Operation 4-8GHz Wide Attenuation Range 30dB Absorptive Topology Singe Control Operation Electrical Specifications, T A = 25 C Description

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Wide Band High Power Solid State Power Amplifier 2GHz~6GHz Electrical Specifications, TA = +25⁰C, Vcc = +28V Features Gain: 42 db min Output power +47dBm typical High P1dB: +45dB m Full Band Supply Voltage:

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Reflective Coaxial SP2T Switch 50 700MHz Electrical Specifications, TA = +25 C, Vdd = +5V/-28V, TTL = 0 / +5V Description Features Wide Band Operation 50-700MHz TTL compatible driver included Fast Switching

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Voltage Control Phase Shifter 2-4GHz Features Wide Band Operation 2-4GHz 360 Phase Shift Low Insertion Loss and Low Phase Error Singe Control Operation Customization available upon request Electrical Specifications,

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Absorptive Coaxial SP3T Switch 8-43.5 Electrical Specifications, T A = +25 C, Vdd = +5V/-5V, TTL = 0 / +5V Description PN: SP3T Absorptive Switch Low Power Cold Switching Parameters Min. Typ. Max. Min.

More information

DC-20 GHz Distributed Driver Amplifier. Parameter Min Typ Max Min Typ Max Units

DC-20 GHz Distributed Driver Amplifier. Parameter Min Typ Max Min Typ Max Units 7-3 RF-LAMBDA DC-20 GHz Distributed Driver Amplifier Electrical Specifications, T A =25 Features Ultra wideband performance Positive gain slope High output power Low noise figure Microwave radio and VSAT

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Electrical Specifications, T A =25 Ultra Wide Band Low Noise Amplifier AC 110V/220V 0.01-20GHz Parameters Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.01 10 10 20 GHz Gain 28 30 26 28 db Gain

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Absorptive Coaxial SP3T Switch 0.5-50GHz Electrical Specifications, T A = +25 C, Vdd = +5V/-5V, TTL = 0 / +5V Description PN: SP3T Absorptive Switch Low Power Cold Switching Parameter Min Typ Max Min Typ

More information

Parameter Min Type Max Units Frequency Range GHz Small Signal Gain,S21 18 db. Input Return Loss,S11 10 db Output Return Loss,S22 7 db

Parameter Min Type Max Units Frequency Range GHz Small Signal Gain,S21 18 db. Input Return Loss,S11 10 db Output Return Loss,S22 7 db High output power >+33dBm Applicable for base station,repeaters of cellular network Aerospace and military application LMDS multi carrier operation High peak to average handle capability High Linearity

More information

2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range

2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range 2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz Features Wideband Solid State Power Amplifier Gain: 37dB Typical Psat 35dBm Typical Electrical Specifications, TA = +25⁰C, Vcc = +12V. Parameter Min. Typ.

More information

20W Solid State Power Amplifier 6-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units

20W Solid State Power Amplifier 6-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units 7-3 RF-LAMBDA 20W Solid State Power Amplifier 6-18GHz Electrical Specifications, TA = +25⁰C Vcc = +36V Features Psat: + 43.5dBm Gain: 51 db Supply Voltage: +36V 50 Ohm Matched Short Haul / High Capacity

More information

Ultra Wide Band Low Noise Amplifier GHz. Electrical Specifications, TA = +25⁰C, With Vg= -5V, Vcc = +4V ~ +7V, 50 Ohm System

Ultra Wide Band Low Noise Amplifier GHz. Electrical Specifications, TA = +25⁰C, With Vg= -5V, Vcc = +4V ~ +7V, 50 Ohm System Ultra Wide Band Low Noise Amplifier 0.5 46GHz Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.5 20 20 46 GHz Gain 13 13 db Gain Variation Over Temperature (-45 ~ +85) ±3 ±2 db Noise Figure

More information

Parameter Min. Typ. Max. Min. Typ. Max. Units

Parameter Min. Typ. Max. Min. Typ. Max. Units 25W Wide Band Power Amplifier 20-6000MHz Features Wideband Solid State Power Amplifier Psat: +45dBm Typical Gain: 50dB Typical Supply Voltage: +60V DC Electrical Specifications, T A =25 Parameter Min.

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS 100W Coaxial Microwave Power Amplifier 20MHz~520MHz Features Small signal open loop gain: 50dB Output power 100W typical Electrical Specifications, T A = +25 C Typical Applications Suitable for RFI, EMC

More information

8W Wide Band Power Amplifier 1GHz~22GHz

8W Wide Band Power Amplifier 1GHz~22GHz 8W Wide Band Power Amplifier 1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 50 db Typical Psat: +39 dbm Supply Voltage: +36V Electrical Specifications, T A = +25⁰C Typical Applications

More information

30W Solid State High Power Amplifier 2-6 GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units

30W Solid State High Power Amplifier 2-6 GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units 7-3 RF-LAMBDA 30W Solid State High Power Amplifier 2-6 GHz Features Wideband Solid State Power Amplifier Psat: +45dBm Gain: 50dB Supply Voltage: +36V Electrical Specifications, T A = +25⁰C, Vcc = +36V

More information

5W Ultra Wide Band Power Amplifier 2-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units

5W Ultra Wide Band Power Amplifier 2-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units 7-3 RF-LAMBDA 5W Ultra Wide Band Power Amplifier 2-18GHz Features Wideband Solid State Power Amplifier Psat: + 37dBm Gain: 35 db Supply Voltage: +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS 50W Broadband High Power Amplifier Module 500 2500MHz Electrical Specifications, T A = +25⁰C, Vdd = +28V Features Ultra-broadband Amplifier Module Small and lightweight Supply Voltage: +28V Parameter Min.

More information

100W Power Amplifier 8GHz~11GHz

100W Power Amplifier 8GHz~11GHz 100W Power Amplifier 8GHz~11GHz High output power +50dBm Aerospace and military application X band radar High Peak to average handle capability All specifications can be modified upon request Parameter

More information

9W Power Amplifier 26.2GHz~34GHz

9W Power Amplifier 26.2GHz~34GHz 9W Power Amplifier 26.2GHz~34GHz High output power > +39.5 dbm Aerospace and military application High Peak to average handle capability High Linearity and low noise figure All specifications can be modified

More information

4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz

4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz 4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 40 db Typical Psat: +37 dbm Typical Noise Figure: 3dB Typical Supply Voltage: +24V (-NP) / +36V (-WP)

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS 80W Broadband High Power Amplifier Module 20-1000MHz Electrical Specifications, T A = +25⁰C, VDD = +28V Features Broadband High Power High Efficiency Great Linearity Small Size & Light Weight Low Distortion

More information

RF-LAMBDA. ABSORPTIVE 2-4 GHz 6 Bits 64dB PIN DIODE ATTENUATOR. Absorptive Pin Diode Attenuator 6 Bits 64dB 2-4GHz RFDAT0204G6A.

RF-LAMBDA. ABSORPTIVE 2-4 GHz 6 Bits 64dB PIN DIODE ATTENUATOR. Absorptive Pin Diode Attenuator 6 Bits 64dB 2-4GHz RFDAT0204G6A. 7 65 6 55 5 5 35 3 25 2 5 5 Frequenc y (GHz) 2- Attenuation Value Insert. Loss 3.dB typ. 3.5dB max. ABSORPTIVE 2- GHz 6 Bits 6dB PIN DIODE ATTENUATOR VSWR Control bits Features Wide Band Operation 2.-.GHz

More information

30W Wideband Solid State Power Amplifier 6-12GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units

30W Wideband Solid State Power Amplifier 6-12GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units 7-3 RF-LAMBDA 30W Wideband Solid State Power Amplifier 6-12GHz Electrical Specifications, TA = +25⁰C, Vdd = +36V Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 6 9 10 12 GHz Gain 60 55 db

More information

100W Wide Band Power Amplifier 6GHz~18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz Gain db

100W Wide Band Power Amplifier 6GHz~18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz Gain db 100W Wide Band Power Amplifier 6GHz~18GHz Features Wideband Solid State Power Amplifier Psat: +50dBm Gain: 75 db Typical Supply Voltage: +48V On board microprocessor driven bias controller. Electrical

More information

dbm Supply Current (Idd) (Vdd=+36V)

dbm Supply Current (Idd) (Vdd=+36V) Ka Band 6W Power Amplifier 28GHz~42GHz High output power Aerospace and military application High Peak to average handle capability High Linearity and low noise figure All specifications can be modified

More information

Parameter Min. Typ. Max. Units. Frequency Range 8-11 GHz. Saturated Output Power (Psat) 52 dbm. Input Max Power (No Damage) Psat Gain dbm

Parameter Min. Typ. Max. Units. Frequency Range 8-11 GHz. Saturated Output Power (Psat) 52 dbm. Input Max Power (No Damage) Psat Gain dbm 150W Solid State EMC Benchtop Power Amplifier 8GHz~11GHz Electrical Specifications, T A =25 Features Automatic Calibration Built in Temperature Compensation Adjustable Attenuation: 31.5dB Range, 0.5dB

More information

20W Solid State Power Amplifier 26.2GHz~34GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz.

20W Solid State Power Amplifier 26.2GHz~34GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz. 20W Solid State Power Amplifier 26.2GHz~34GHz Features Wideband Solid State Power Amplifier Gain: 65dB Typical Psat: +43dBm Typical Supply : +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V Typical

More information

150W Solid State Broadband EMC Benchtop Power Amplifier 6-18GHz. Parameter Min Typ Max Min Typ Max Units

150W Solid State Broadband EMC Benchtop Power Amplifier 6-18GHz. Parameter Min Typ Max Min Typ Max Units 7-3 RF-LAMBDA 150W Solid State Broadband EMC Benchtop Power Amplifier 6-18GHz Electrical Specifications, T A =25 Voltage = 110v/220v AC Features High Saturated Output Power 50~52dBm. Telecom Infrastructure

More information

Features. = +25 C, +Vdc = +6V, -Vdc = -5V

Features. = +25 C, +Vdc = +6V, -Vdc = -5V v3.7 WIDEBAND LNA MODULE, - 2 GHz amplifiers Typical Applications The Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Industrial Sensors Functional

More information

Features. Gain Variation Over Temperature db/ C

Features. Gain Variation Over Temperature db/ C HMC-C26 Features Typical Applications The HMC-C26 Wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Gain: 3 db

More information

Features. = +25 C, +Vdc = +6V, -Vdc = -5V

Features. = +25 C, +Vdc = +6V, -Vdc = -5V HMC-C59 v.59 WIDEBAND LNA MODULE, - 2 GHz Typical Applications The HMC-C59 Wideband LNA is ideal for: Telecom Infrastructure Features Noise Figure:.8 db @ 8 GHz High Gain: 6 db @ 8 GHz PdB Output Power:

More information

Features. = +25 C, Vdc = +7V

Features. = +25 C, Vdc = +7V amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -7 dbc/hz @ khz Noise Figure: 6 db Gain:

More information

Features. The HMC-C072 is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT. = +25 C, Vdc = +7V

Features. The HMC-C072 is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT. = +25 C, Vdc = +7V amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -67 dbc/hz @ khz Noise Figure: 4.5 db Gain:

More information

Features. = +25 C, Vdc = +5V

Features. = +25 C, Vdc = +5V amplifiers Typical Applications The HMC-C is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram v.7 HMC-C Features Ultra Low Phase Noise: -6 dbc/hz @ khz Noise Figure:

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20. DC Current A 1.6

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20. DC Current A 1.6 AMT-A0030 2 GHz to 18 GHz 8W 41 db Gain Broadband High Power Amplifier Module Data Sheet Features 2 GHz to 18 GHz Frequency Range Typical Psat power > +39 dbm Gain 41 db High Efficiency Internally Regulated

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20 AMT-A0119 0.8 GHz to 3 GHz Broadband High Power Amplifier W P1dB Data Sheet Features 0.8 GHz to 3GHz Frequency Range Class AB, High Linearity Gain db min 55 db Typical Gain Flatness < ± 1.2 db Typical

More information

Features. = +25 C, Vs= +8V to +16V

Features. = +25 C, Vs= +8V to +16V v2.17 Typical Applications The Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Features Electrical Specifications,

More information

Features. DC - 18 GHz. Switching Transients DC - 18 GHz 12 mvpp

Features. DC - 18 GHz. Switching Transients DC - 18 GHz 12 mvpp v1.711 HMC-C5 SWITCH, DC - 1 GHz Typical Applications The HMC-C5 is ideal for: Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar, & ECM Test Instrumentation Functional Diagram

More information

TGA2583-SM 2.7 to 3.7 GHz, 10 W GaN Power Amplifier

TGA2583-SM 2.7 to 3.7 GHz, 10 W GaN Power Amplifier Applications Commercial and Military Radar QFN 5x5 mm 32L Product Features Functional Block Diagram Frequency Range: 2.7 3.7 GHz PSAT:.5 dbm PAE: > 50 % Small Signal Gain: 33 db Return Loss: > 12 db Bias:

More information

Features. Gain: 17 db. OIP3: 25 dbm. = +25 C, Vdd 1, 2 = +3V

Features. Gain: 17 db. OIP3: 25 dbm. = +25 C, Vdd 1, 2 = +3V v.7 HMCLC Typical Applications The HMCLC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space Functional

More information

QPA GHz 50 Watt GaN Amplifier

QPA GHz 50 Watt GaN Amplifier QPA1 2.8 3.2 GHz Watt GaN Amplifier Product Description Qorvo s QPA1 is a high-power, S-band amplifier fabricated on Qorvo s QGaN.um GaN on SiC production process. Covering 2.8-3.2 GHz, the QPA1 typically

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +10

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +10 AMT-A0091 0.01 GHz to 6 GHz Broadband Low Noise Medium Power Amplifier Data Sheet Features 0.01 GHz to 6 GHz Frequency Range Typical Noise Figure < 1.2 db Typical Gain 45 db Gain Flatness < ± 1.2 db +20

More information

Features. = +25 C, Vdd= 8V, Idd= 75 ma*

Features. = +25 C, Vdd= 8V, Idd= 75 ma* HMC46LC5 Typical Applications v3.11 AMPLIFIER, DC - 2 GHz Features The HMC46LC5 is ideal for: Noise Figure: 2.5 db @ 1 GHz Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20 AMT-A0142 1 GHz to 18 GHz Broadband Medium Power with Low Noise Amplifier Data Sheet Features 1 GHz to 18 GHz Frequency Range Typical P1dB power > +23 dbm Gain 18 db Typical Gain Flatness ± 1 db Typical

More information

QPA GHz 50 Watt GaN Amplifier

QPA GHz 50 Watt GaN Amplifier QPA1 2.8 3.2 GHz Watt GaN Amplifier Product Description Qorvo s QPA1 is a high-power, S-band amplifier fabricated on Qorvo s QGaN.um GaN on SiC production process. Covering 2.8-3.2 GHz, the QPA1 typically

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +37

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +37 AMT-A0060 6 GHz to 18 GHz Broadband Low Noise Amplifier with 5W CW Limiter Data Sheet Features 6 GHz to 18 GHz Frequency Range Typical Noise Figure < 2.2 db Typical Gain 25 db Gain Flatness < ± 1.5 db

More information

TGL2201-SM T/R. Wideband Dual Stage VPIN Limiter. Applications. Ordering Information. Part No. ECCN Description

TGL2201-SM T/R. Wideband Dual Stage VPIN Limiter. Applications. Ordering Information. Part No. ECCN Description Applications LNA Receiver Chain Protection Military Radar Product Features 2-12 GHz Passive, High Isolation Limiter Low Loss < 1.0 db, X-band Return Loss > 10 db Flat Leakage < 18 dbm Input Power CW Survivability

More information

Features. Parameter Min. Typ. Max. Units. Frequency Range 8 12 GHz Insertion Loss* db. Input Return Loss* 10 db

Features. Parameter Min. Typ. Max. Units. Frequency Range 8 12 GHz Insertion Loss* db. Input Return Loss* 10 db v4.711 HMC-C Features Low RMS Phase Error: Low Insertion Loss: 7 db Excellent Flatness 3 Coverage, LSB = 22. Hermetically Sealed Module Field Replaceable SMA Female Connectors Typical Applications The

More information

Features = +5V. = +25 C, Vdd 1. = Vdd 2

Features = +5V. = +25 C, Vdd 1. = Vdd 2 v7.11 HMC1LC3 POWER AMPLIFIER, - GHz Typical Applications The HMC1LC3 is ideal for use as a medium power amplifier for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC7LP5E POWER AMPLIFIER,.2

More information

TGA2567-SM 2 20 GHz LNA Amplifier

TGA2567-SM 2 20 GHz LNA Amplifier Product Description Qorvo s is a LNA Gain Block fabricated on Qorvo s proven.um phemt production process. The operates from 2 to 2 GHz and typically provides 19 dbm of 1dB compressed output power with

More information

TGM2543-SM 4-20 GHz Limiter/LNA

TGM2543-SM 4-20 GHz Limiter/LNA TGM243-SM Applications Receiver front end building block Product Features QFN 7x7mm 22L Frequency Range: 4-2 GHz Input Power CW Survivability: 4 W Functional Block Diagram Gain: 17 db Noise Figure: 2 db

More information

TQP DC-6 GHz Gain Block

TQP DC-6 GHz Gain Block Applications Wireless Infrastructure CATV / SATV / MoCA Point to Point Defense & Aerospace Test & Measurement Equipment General Purpose Wireless SOT-89 Package Product Features Functional Block Diagram

More information

Features. = +25 C, Vdd= 8V, Vgg2= 3V, Idd= 290 ma [1]

Features. = +25 C, Vdd= 8V, Vgg2= 3V, Idd= 290 ma [1] Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features P1dB Output Power: + dbm Gain:

More information

TGA4532 K-Band Power Amplifier

TGA4532 K-Band Power Amplifier Applications Point-to-Point Radio Communication Product Features Functional Block Diagram Frequency Range: 17.5 20 GHz Power: 32.5 dbm Psat, 31.5 dbm P1dB Gain: 23 db TOI: 43 dbm @ 22 dbm SCL Return Loss:

More information

TAT7457-EB. CATV 75 Ω phemt Adjustable Gain RF Amplifier. Applications. Ordering Information

TAT7457-EB. CATV 75 Ω phemt Adjustable Gain RF Amplifier. Applications. Ordering Information Applications Single-ended and Push-pull Optical Receivers Low-noise Drop Amplifiers Distribution Amplifiers Multi-Dwelling Units Single-ended Gain Block SOT-89 package Product Features Functional Block

More information

AVP TO 2600 MHz, 15 WATTS HIGH POWER GaNPak B AMPLIFIER AVP2524 SPECIFICATIONS * INTERMODULATION PERFORMANCE ABSOLUTE MAXIMUM RATINGS AVP2524

AVP TO 2600 MHz, 15 WATTS HIGH POWER GaNPak B AMPLIFIER AVP2524 SPECIFICATIONS * INTERMODULATION PERFORMANCE ABSOLUTE MAXIMUM RATINGS AVP2524 Rev. 5/1 6 TO 26 MHz, 15 WATTS HIGH POWER GaNPak B AMPLIFIER Typical Values Broadband....................................... High Gain....................................... High Saturated Power, Psat.........................

More information

TGP2105-SM 6-18 GHz 6-Bit Digital Phase Shifter (+Vc)

TGP2105-SM 6-18 GHz 6-Bit Digital Phase Shifter (+Vc) Applications Phased Array Antenna Systems Satellite Communication Systems Electronic Warfare QFN 5x5 mm 32L Product Features Functional Block Diagram Frequency Range: 6 to 18 GHz 6-Bit Digital Phase Shifter

More information

TGA2578-CP 2 to 6 GHz, 30W GaN Power Amplifier

TGA2578-CP 2 to 6 GHz, 30W GaN Power Amplifier 2 to, W GaN Power Amplifier Applications Electronic Warfare Radar Communications Test Instrumentation EMC Amplifier Product Features Frequency Range: 2 Pout: dbm at PIN = 23 dbm PAE: >% CW Small Signal

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +10

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +10 AMT-A0112 11 GHz to 18 GHz Broadband Low Noise Amplifier Data Sheet Features 11 GHz to 18 GHz Frequency Range Typical Noise Figure < 1.4 db Typical Gain 40 db Gain Flatness < ± 2 db +14 dbm P1dB Internally

More information

Features. = +25 C, Vdd1, 2, 3 = 5V, Idd = 250 ma*

Features. = +25 C, Vdd1, 2, 3 = 5V, Idd = 250 ma* v.4 HMC498LC4 Typical Applications Features The HMC498LC4 is ideal for use as a LNA or Driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use

More information

TGA2813-CP 3.1 to 3.6 GHz, 100W GaN Power Amplifier

TGA2813-CP 3.1 to 3.6 GHz, 100W GaN Power Amplifier Applications Radar Product Features Frequency Range: 3.1 3.6 GHz Pout: 5 dbm (at PIN = 27 dbm) Power Gain: 23 db (at PIN = 27 dbm) PAE: 51 % CW Bias: VD = pulsed (PW = 15 ms, DC = 3 %), IDQ = 3 ma, VG

More information

HILNA V1 Low Noise Amplifier

HILNA V1 Low Noise Amplifier HILNA V1 Low Noise Amplifier 50-1000 MHz db Gain P/N: HILNA-V1 (includes NW-LN-ACC-CB02CA interface cable) NuWaves HILNA V1 is the first in its class of broadband low noise amplifiers designed to achieve

More information

HMC5805ALS6 AMPLIFIERS - LINEAR & POWER - SMT. Typical Applications. Features. Functional Diagram

HMC5805ALS6 AMPLIFIERS - LINEAR & POWER - SMT. Typical Applications. Features. Functional Diagram HMC585ALS6 v2.517 GaAs phemt MMIC.25 WATT POWER AMPLIFIER DC - 4 GHz Typical Applications The HMC585ALS6 is ideal for: Test Instrumentation Microwave Radio & VSAT Military & Space Telecom Infrastructure

More information

TGP2107-SM 6 to 18 GHz 6-Bit Digital Phase Shifter ( V C )

TGP2107-SM 6 to 18 GHz 6-Bit Digital Phase Shifter ( V C ) TGP217-SM Applications Phased Array Antenna Systems Satellite Communication Systems Electronic Warfare QFN 5x5 mm 32L Product Features Functional Block Diagram Frequency Range: 6 to 18 GHz 6-Bit Digital

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +37

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +37 AMT-A0246 4 GHz to 8 GHz Broadband LNA with 5 W Protection Limiter Data Sheet Features 4 GHz to 8 GHz Frequency Range +37 dbm (5W) CW Pin survival Gain 28 db Typical Gain Flatness ± 0.6 db Typical 2.2

More information

12D05A L- & S-Band Solid State Power Amplifier

12D05A L- & S-Band Solid State Power Amplifier 12D05A L- & S-Band Solid State Power Amplifier 35 Watts CW @ 1.7 GHz to 2.1 GHz 20 Watts CW @ 2.1 GHz to 2.4 GHz P/N: NW-PA-12D05A (Includes NW-PA-ACC-CB09MC interface cable) The NuPower 12D05A is a small,

More information

TGM2635-CP X-Band 100 W GaN Power Amplifier

TGM2635-CP X-Band 100 W GaN Power Amplifier Product Overview Qorvo s TGM2635 CP is a packaged X-band, high power amplifier fabricated on Qorvo s production 0.25um GaN on SiC process. The TGM2635 CP operates from 7.9 11 GHz and provides 100 W of

More information

TGA2214-CP 2 18 GHz 4 W GaN Power Amplifier

TGA2214-CP 2 18 GHz 4 W GaN Power Amplifier Product Description Qorvo s TGA2214-CP is a packaged wideband power amplifier fabricated on Qorvo s QGaN15 0.15 µm GaN on SiC process. Operating from 2 to 18 GHz, the TGA2214- CP generates > 4 W saturated

More information

TGA2622-CP 9 10 GHz 35 W GaN Power Amplifier

TGA2622-CP 9 10 GHz 35 W GaN Power Amplifier 9 1 GHz W GaN Power Amplifier Applications Weather and Marine Radar Product Features Frequency Range: 9 1 GHz PSAT:.5 dbm @ PIN = 18 dbm PAE: >% @ PIN = 18 dbm Power Gain: 27.5 db @ PIN = 18 dbm Bias:

More information

FMAM4032 DATA SHEET. 10 MHz to 6 GHz, Medium Power Broadband Amplifier with 900 mw, 24 db Gain and SMA. Features: Applications:

FMAM4032 DATA SHEET. 10 MHz to 6 GHz, Medium Power Broadband Amplifier with 900 mw, 24 db Gain and SMA. Features: Applications: FMAM432 1 MHz to 6 GHz, Medium Power Broadband Amplifier with 9 mw, 24 db Gain and SMA FMAM432 two stage amplifier operates across a wide frequency range from 1 MHz to 6 GHz The design utilizes GaAs PHEMT

More information

12B01A-09 S-Band Solid State Power Amplifier

12B01A-09 S-Band Solid State Power Amplifier 12B1A-9 S-Band Solid State Power Amplifier Watt CW 2.5 Watts Linear, 5% EVM @ 34 dbm 2. GHz - 2.5 GHz P/N: NW-PA-12B1A-9 The NuPower 12B1A-9 is a small, highly efficient solid state power amplifier that

More information

12B01A-D30 L- & S-Band Solid State Power Amplifier w/ 1 Watt Input Drive Level

12B01A-D30 L- & S-Band Solid State Power Amplifier w/ 1 Watt Input Drive Level 12B01A-D30 L- & S-Band Solid State Power Amplifier w/ 1 Watt Input Drive Level 10 Watts (CW) 1.0-2.5 GHz P/N: NW-PA-12B01A-D30 (Replaces P/N: NW-SSPA-10W-1.0-2.5-D30) The NuPower 12B01A-D30 is a small,

More information

TGA2578-CP 2 to 6 GHz, 30W GaN Power Amplifier

TGA2578-CP 2 to 6 GHz, 30W GaN Power Amplifier TGA78-CP Applications Electronic Warfare Radar Communications Test Instrumentation EMC Amplifier Product Features Frequency Range: 2 Pout: dbm at PIN = 23 dbm PAE: >% CW Small Signal Gain: > db IM3: -

More information

TGM2635-CP X-Band 100 W GaN Power Amplifier

TGM2635-CP X-Band 100 W GaN Power Amplifier Product Overview Qorvo s TGM2635 CP is a packaged X-band, high power amplifier fabricated on Qorvo s production 0.25um GaN on SiC process. The TGM2635 CP operates from 7.9 11 GHz and provides 100 W of

More information

TQP3M9035 High Linearity LNA Gain Block

TQP3M9035 High Linearity LNA Gain Block Applications Repeaters Mobile Infrastructure LTE / WCDMA / CDMA / GSM General Purpose Wireless TDD or FDD systems Product Features 2x2mm 8-lead DFN plastic package Functional Block Diagram 5-4 MHz.66 db

More information

TGA2583-SM 2.7 to 3.7GHz, 10W GaN Power Amplifier

TGA2583-SM 2.7 to 3.7GHz, 10W GaN Power Amplifier Applications Commercial and Military Radar QFN 5x5 mm 32L Product Features Functional Block Diagram Frequency Range: 2.7-3.7 GHz P SAT :.5 dbm PAE: > 50 % Small Signal Gain: 33 db Return Loss: > 12 db

More information

Features. = +25 C, Vdd= +12V, Vgg2= +5V, Idd= 400 ma*

Features. = +25 C, Vdd= +12V, Vgg2= +5V, Idd= 400 ma* Typical Applications The HMC637LP5(E) wideband PA is ideal for: Features P1dB Output Power: +29 dbm Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional

More information

TGA2814-CP 3.1 to 3.6 GHz, 80W GaN Power Amplifier

TGA2814-CP 3.1 to 3.6 GHz, 80W GaN Power Amplifier Applications Radar Product Features Frequency Range:.1. GHz Pout: 9 dbm at PIN = 7 dbm PAE: 5 % Pulsed Power Gain: db at PIN = 7 dbm Bias: VD = V, IDQ = ma, VG = - V typical, pulsed (PW = 15 ms, DC = %)

More information

12B01A L- & S-Band Solid State Power Amplifier

12B01A L- & S-Band Solid State Power Amplifier 12B1A L- & S-Band Solid State Power Amplifier 1 Watt CW 2.5 Watts Linear, 5% EVM @ 34 dbm 1. GHz - 2.5 GHz P/N: NW-PA-12B1A (includes NW-PA-ACC-CB9MA interface cable) The NuPower 12B1A is a small, highly

More information

Features. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz

Features. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz Typical Applications The HMC62LP / HMC62LPE Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features

More information