Solid State PIN Control Products
|
|
|
- Kory Hutchinson
- 5 years ago
- Views:
Transcription
1 Power Monitors d Sensors Description GHz d 2-18 GHz Super-Slim High Performce Drop-In Switches y Reflective d Absorptive Introduction y SPST thru SP6T d Trsfer (Stdard) y High Speed y High Isolation up to db y Low Insertion Loss y Drop-In Applications y Integral TTL Drivers y Hermetically Sealed y Full MIL Specifications The super-slim series of broadbd, hermetically sealed switches offers fast switching speed d low insertion loss in very compact packages. Both 0.5 to 18 GHz d 2 to 18 GHz models are available. The switches are gold plated d have removable SMA connectors for use in drop-in applications. Superior RF performce is achieved over the entire bdwidth due to the use of selected diodes d optimum RF circuit designs. All models include integral drivers with reverse voltage protection. The drivers are TTL compatible d are tailored to each RF circuit to give optimum switching performce. The small size, high speed, broad bdwidth d low insertion loss make these switches ideal for EW systems, automatic test equipment d simulators. nardaeast@l-3com.com TEL: compy 303
2 Introduction Specifications Reflective Switches, SMA (F), 0.5 to 18 GHz Power Monitors d Sensors SWITCHING TIME MODULATION SUPPLY SS212DHS SPST SS122DHS SP2T 0 90 SS132DHS SP3T 0 90 SS142DHS SP4T SS152DHS SP5T SS162DHS SP6T compy nardaeast@l-3com.com TEL:
3 Power Monitors d Sensors Introduction Absorptive Switches, SMA (F), 0.5 to 18 GHz SWITCHING TIME MODULATION SUPPLY SS212DHTS SPST SS212DHTS- SPST SS122DHTS SP2T SS122DHTS- SP2T SS132DHTS SP3T SS142DHTS SP4T SS152DHTS SP5T SS162DHTS SP6T nardaeast@l-3com.com TEL: compy 305
4 Introduction Specifications Reflective Switches, SMA (F), 2 to 18 GHz Power Monitors d Sensors SWITCHING TIME MODULATION SUPPLY SS213DHS SPST SS213DHS- SPST SS123DHS SP2T SS123DHS- SP2T SS133DHS SP3T SS143DHS SP4T SS153DHS SP5T SS163DHS SP6T Trsfer Switch, SMA (F), 2 to 18 GHz SWITCHING TIME SUPPLY XSS323CDHS XFER compy nardaeast@l-3com.com TEL:
5 Power Monitors d Sensors Introduction Absorptive Switches, SMA (F), 2 to 18 GHz SWITCHING TIME MODULATION SUPPLY SS213BDHTS SPST SS123BDHTS SP2T 0 SS133BDHTS SP3T SS143BDHTS SP4T SS153BDHTS SP5T SS163BDHTS SP6T nardaeast@l-3com.com TEL: compy 307
6 Introduction Power Monitors d Sensors Electrical Specifications TTL CONTROL LOGIC Logic 0 (0-0.8 V, ma max. 0.4 V) = Insertion Loss Logic 1 (-5.5 V, 40 μa max. V) = Isolation FOR TRANSFER SWITCH (XSS323CDHS) Logic 0: J1-J4 d J2-J3 at Insertion Loss Logic 1: J1-J2 d J4-J3 at Insertion Loss SWITCHING TIME T on = % TTL to 90% of RF voltage T off = % TTL to 10% of RF voltage SWITCHING RATE 5 MHz max. duty cycle DRIVER Reverse voltage protected SURVIVAL at C (Cold Switching) 1.0 W CW, W Peak (1μs max. pulse width, 5% duty cycle) Derate linearly to % at +95 C Environmental Specifications TEMPERATURE Operating -54 C to +95 C Storage - C to +1 C HUMIDITY Per MIL-STD-2F, method 103B, condition B (96 hours at 95% R.H.) SHOCK Per MIL-STD-2F, method 213B, condition B ( G, 6 ms) ALTITUDE Per MIL-STD-2F, method 105C, condition B (,000 feet) VIBRATION Per MIL-STD-2F, method 4D, condition B (.06 double amplitude or 15 G, whichever is less) THERMAL SHOCK Per MIL-STD-2F, method 107D, condition A (5 cycles) Options y Very Low Loss Video Leakage y Inverted TTL Logic Control y BCD Decoder Driver y Package Configuration y Over Voltage Protection 308 compy nardaeast@l-3com.com TEL:
7 Power Monitors d Sensors Outline Drawings Introduction.06 (2) TYP..62 (15.9).48 (1) (5.6) (15.9) J1. (17.8) J2.32 (8.12).21 (5.33) TYP.11 (2.8) TYP.22 (5.6) TYP. (5.0) TYP. C -V G +V.14 (3.6) TYP..82 (.8) DIA..0 ()THRU TYP. 4 PLCS. DIA..018 X. (0.45 X 6.35) TYP. 4 PLCS. SMA CONN. (F) TYP. 2 PLCS SS213DHS, SS213BDHTS SS213DHS-, SS212DHS, SS212DHTS SS123DHS, SS123BDHTS, SS122DHS, SS123DHS-, SS122DHTS SS133DHS, SS133BDHTS, SS132DHS, SS132DHTS Dimensions in inches (mm in parentheses), unless otherwise specified. nardaeast@l-3com.com TEL: compy 309
8 Introduction Outline Drawings Power Monitors d Sensors THRU.10 () 6x CONN. SMA FEMALE 1.00 (.4). (1).22 (5.6).38 (9.5).06 () J1 COM 1.40 (35.6) 1.05 (26.8). (17.7).34 (8.7) J2 J3 C1 C2 C3 C4 C5 - V G +V J5 J (32.6) (F) (9).12 ().24 (6.1).06 ().88 (2).22 (5.6).07 () TYP 6x Ø.012 (.31) x.10 () LG 4x Ø.08 () 8x Ø.018 (.45) x. (6.3) LG SS143DHS, SS143BDHTS, SS142DHS, SS142DHTS SS153DHS, SS153BDHTS, SS152DHTS, SS152DHS..88 (2) SS163DHS, SS163BDHTS, SS162DHS, SS162DHTS XSS323CDHS Dimensions in inches (mm in parentheses), unless otherwise specified. 310 compy nardaeast@l-3com.com TEL:
Solid State PIN Control Products
Power Monitors d Sensors Description Solid State Control 0.5-18 GHz d 2-18 GHz High Performce Switches y Reflective d Absorptive Introduction y SPST thru SP6T d Trsfer (Stdard) y High Speed 15 ns y High
Solid State PIN Control Products
Solid State Control 2-18 GHz High Speed Switched-Bit Attenuators y Very High Speed y Precise Attenuation over Frequency Bd y Small Package Size y Low Insertion Loss y Hermetically Sealed Options Available
Stocked Electro-Mechanical Switches
DC-6.5 GHz SPT SEM Series y Stdard Features Include: Latching Models, Failsafe Models, TTL Logic Control, Indicator Circuits Specifications SPT, SMA (F), DC to 8 GHz MODEL FEATURES ACTUATING CURRENT (ma
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Reflective Coaxial SP2T Switch 50 700MHz Electrical Specifications, TA = +25 C, Vdd = +5V/-28V, TTL = 0 / +5V Description Features Wide Band Operation 50-700MHz TTL compatible driver included Fast Switching
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Absorptive Coaxial SP3T Switch 0.5-50GHz Electrical Specifications, T A = +25 C, Vdd = +5V/-5V, TTL = 0 / +5V Description PN: SP3T Absorptive Switch Low Power Cold Switching Parameter Min Typ Max Min Typ
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
LEADER OF RF BROADBAND SOLTIONS Absorptive Coaxial SP2T Switch.2 ~ Features Wide Band Operation.2- TTL compatible driver included Fast Switching Speed Low Insertion Loss and High Isolation Customization
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Absorptive Coaxial SP3T Switch 8-43.5 Electrical Specifications, T A = +25 C, Vdd = +5V/-5V, TTL = 0 / +5V Description PN: SP3T Absorptive Switch Low Power Cold Switching Parameters Min. Typ. Max. Min.
Standard Custom Electro-Mechanical Switches
Introduction Power Monitors DC-10 GHz, Type N d TNC SP7T-SP8T Series 073-083 RF Performce Freq. Rge (GHz) DC-3 3-8 8-10 VSWR (max.) 1.2 1.35 1.5 Insertion Loss (db max.) Isolation (db min.) Additional
Standard Custom Electro-Mechanical Switches
DC-26.5 GHz, SMA DP2T Series 136 Trsfer Switch RF Performce Freq. Rge (GHz) DC-3 3-8 8-12.4 12.4-18 18-26.5 VSWR (max.) 1.2 1.3 1.4 1.5 1.7 Insertion Loss (db max.) Isolation (db min.) Additional Specifications
Standard Custom Electro-Mechanical Switches
Power Monitors DC-26.5 GHz, SMA SP3T-SP6T Series 030-060 RF Performce Freq. Rge (GHz) DC-3 3-8 8-12.4 12.4-18 18-26.5 VSWR (max.) 1.2 1.3 1.4 1.5 1.8 Insertion Loss (db max.) Isolation (db min.) 0.2 0.3
SDA SMA DATA SHEET
0 to 60 db 10 Bit Programmable TTL Controlled Step Attenuator With a 006 db Step SMA Female To SMA Female From 500 MHz To 18 GHz The is a Non-Reflective 10 Bit Programmable 60 db Pin Diode Attenuator with
Series CCT-38S Multi-Throw DC 12 GHz, SP7T & SP8T Normally Open Coaxial Switch
COAX SWITCHES Series CCT-38S PART NUMBER CCT-38S DESCRIPTION Commercial Normally Open Multi-throw, DC-12 GHz The CCT-38S is a broadband, multi-throw, electromechanical coaxial switch designed to switch
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Absorptive Voltage Controlled Attenuator 4-8GHz Features Wide Band Operation 4-8GHz Wide Attenuation Range 30dB Absorptive Topology Singe Control Operation Electrical Specifications, T A = 25 C Description
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Reflective Coaxial SP2T Switch DC - 6 Electrical Specifications, TA = +25 C, Vcc +5V, TTL= 0 / +5V Description Features Wide Band Operation DC-6 TTL compatible driver included Fast Switching Speed Low
PAGE 1/12 ISSUE SERIES DP3T/SPDT PART NUMBER R595 XXX XXX
PAGE 1/12 ISSUE 22-06-2018 SERIES DP3T/SPDT PART NUMBER R595 XXX XXX DP3T-SPDT Coaxial Switches DC to 6 GHz, DC to 20 GHz, DC to 26.5 GHz, DC to 40 GHz Radiall s PLATINUM SERIES switches are optimised
Applications: WEIGHT: grams (typical)
RADIATION TOLERANT VDC A POWER MOSFET OPTOCOUPLER Mii Features: This Design Tested to krad (Si) Total Dose Hermetically Sealed in Surface Mount Package Low On-resistance A Continuous Output Current Performance
Series CCR-58S/CR-58S Multi-Throw DC 26.5 GHz Normally Open Coaxial Switch
PART NUMBER CCR-58S CR-58S DESCRIPTION Commercial Normally Open Multi-throw, DC-6.5GHz Elite Normally Open Multi-throw, DC-6.5GHz The CCR-58S/CR-58S is a broadband, multi-throw, electromechanical coaxial
Series CCT-58S/CT-58S Multi-Throw DC-26.5 GHz Normally Open Coaxial Switch
COAX SWITCHES Series CCT-58S/CT-58S PART NUMBER CCT-58S CT-58S DESCRIPTION Commercial Normally Open Multi-throw, DC-26.5GHz Elite Normally Open Multi-throw, DC-26.5GHz The CCT-58S/CT-58S is an internally
Series CCT-38S/CT-38S Multi-Throw DC 18 GHz/DC-22 GHz Normally Open Coaxial Switch
COAX SWITCHES Series CCT-38S/CT-38S PART NUMBER CCT-38S CT-38S DESCRIPTION Commercial Normally Open Multi-throw, DC-18GHz Elite Normally Open Multi-throw, DC-22GHz The CCT-38S/CT-38S is an internally terminated,
Ultra Wide Band Low Noise Amplifier GHz. Electrical Specifications, TA = +25⁰C, With Vg= -5V, Vcc = +4V ~ +7V, 50 Ohm System
Ultra Wide Band Low Noise Amplifier 0.5 46GHz Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.5 20 20 46 GHz Gain 13 13 db Gain Variation Over Temperature (-45 ~ +85) ±3 ±2 db Noise Figure
Isolation db Input VSWR : 1 Output VSWR : 1 RF Input Power (Pulsed, 10% Duty Cycle, 20us pulse
LEADER OF RF BROADBAND SOLTIONS Reflective Coaxial SP2T Switch.5-6 Electrical Specifications, T A = +25 C, Vdd = +5V, TTL = / +5V Description PN: SP2T Reflective Switch High Power Cold Switching Parameter
Series CCT-58S/CT-58S Multi-Throw DC-26.5 GHz Normally Open Coaxial Switch
COAX SWITCHES Series CCT-58S/CT-58S PART NUMBER CCT-58S CT-58S DESCRIPTION Commercial Normally Open Multi-throw, DC-26.5GHz Elite Normally Open Multi-throw, DC-26.5GHz The CCT-58S/CT-58S is an internally
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
LEADER OF RF BROADBAND SOLTIONS Absorptive Coaxial SPST Switch - RFSPSTAG Features Wide Band Operation - TTL compatible driver included Fast Switching Speed Low Insertion Loss and High Isolation Electrical
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Voltage Control Phase Shifter 2-4GHz Features Wide Band Operation 2-4GHz 360 Phase Shift Low Insertion Loss and Low Phase Error Singe Control Operation Customization available upon request Electrical Specifications,
100W Wide Band Power Amplifier 6GHz~18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz Gain db
100W Wide Band Power Amplifier 6GHz~18GHz Features Wideband Solid State Power Amplifier Psat: +50dBm Gain: 75 db Typical Supply Voltage: +48V On board microprocessor driven bias controller. Electrical
4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz
4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 40 db Typical Psat: +37 dbm Typical Noise Figure: 3dB Typical Supply Voltage: +24V (-NP) / +36V (-WP)
Series CCT-59S Multi-Throw DC-18 GHz, SP7T & SP8T Latching Coaxial Switch, Internal 50Ω Termination
COAX SWITCHES Series CCT-59S PART NUMBER CCT-59S DESCRIPTION Commercial Latching Multi-throw, DC-18GHz The CCT-59S is a broadband, multi-throw, electromechanical coaxial switch designed to switch a microwave
TITANIUM SERIES R 51 PART NUMBER SELECTION. High Performance Multiport Switches. Our Most Important Connection is with You.
PART NUMBER SELECTION Models: 2: Without 50 Ω terminations 4: With 50 Ω terminations RF Connectors: 3: SMA up to 6 GHz 4: SMA up to 20 GHz F: SMA up to 26.5 GHz 8: SMA 2.9 up to 40 GHz (1) Radiall s TITANIUM
MACH-ZEHNDER MODULATOR DRIVERS JSX Series
FEATURES Specifically designed for fiber optic applications Standard models for 10, 10.7 and 12.5 Gb/s data rates Product line includes linear and limiting amplifiers Gain control available Compatible
Series CCT-59S/CT-59S Multi-Throw DC-26.5 GHz Latching Coaxial Switch
PART NUMBER CCT-59S CT-59S DESCRIPTION Commercial Latching Multi-throw, DC-26.5GHz Elite Latching Multi-throw, DC-26.5GHz The CCT-59S/CT-59S is an Internally Terminated broadband, multi-throw, electromechanical
Mii RADIATION TOLERANT, 90V - 0.8A DUAL POWER MOSFET OPTOCOUPLERS. Features: Applications:
55 RADIATION TOLERANT, 90V - 0.8A DUAL POWER MOSFET OPTOCOUPLERS Mii Features: Designed for 100 krad(si) Total Dose 8-Pin Dual-In-Line Hermetic Package Performance over 55 C to +15 C Compact Isolation
8W Wide Band Power Amplifier 1GHz~22GHz
8W Wide Band Power Amplifier 1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 50 db Typical Psat: +39 dbm Supply Voltage: +36V Electrical Specifications, T A = +25⁰C Typical Applications
Series CCR-48K/CR-48K Multi-Throw DC 40 GHz Normally Open Coaxial Switch
COAX SWITCHES Series CCR-48K/CR-48K PART NUMBER CCR-48K CR-48K DESCRIPTION Commercial Normally Open Multi-throw, DC-40GHz Elite Normally Open Multi-throw, DC-40GHz The CCR-48K/CR-48K is a broadband, multi-throw,
Series CCR-39S/CR-39S Multi-Throw DC-18 GHz/DC-22 GHz Latching Coaxial Switch
PART NUMBER CCR-39S CR-39S DESCRIPTION Commercial Latching Multi-throw, DC-8GHz Elite Latching Multi-throw, DC-22GHz The CCR-39S/CR-39S is a broadband, multi-throw, electromechanical coaxial switch designed
30W Solid State High Power Amplifier 2-6 GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 30W Solid State High Power Amplifier 2-6 GHz Features Wideband Solid State Power Amplifier Psat: +45dBm Gain: 50dB Supply Voltage: +36V Electrical Specifications, T A = +25⁰C, Vcc = +36V
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
LEADER OF RF BROADBAND SOLTIONS Absorptive Coaxial SP8T Switch. -. RFSP8TAG Electrical Specifications, TA = + C, Vdd = +V/-V, TTL = / +V Description Features ltra Wide Band Operation.-. TTL compatible
20W Solid State Power Amplifier 26.2GHz~34GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz.
20W Solid State Power Amplifier 26.2GHz~34GHz Features Wideband Solid State Power Amplifier Gain: 65dB Typical Psat: +43dBm Typical Supply : +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V Typical
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
50W Broadband High Power Amplifier Module 500 2500MHz Electrical Specifications, T A = +25⁰C, Vdd = +28V Features Ultra-broadband Amplifier Module Small and lightweight Supply Voltage: +28V Parameter Min.
DC-20 GHz Distributed Driver Amplifier. Parameter Min Typ Max Min Typ Max Units
7-3 RF-LAMBDA DC-20 GHz Distributed Driver Amplifier Electrical Specifications, T A =25 Features Ultra wideband performance Positive gain slope High output power Low noise figure Microwave radio and VSAT
MAGNETIC-LATCHING DPDT HALF-SIZE CRYSTAL CAN HIGH POWER RF RELAY DC-3 GHZ
MAGNETIC-LATCHING DPDT HALF-SIZE CRYSTAL CAN HIGH POWER RF RELAY DC-3 GHZ SERIES RELAY TYPE Commercial, DPDT, High Power, Half-Size Crystal Can Relay Commercial, DPDT, High Power, Half-Size Crystal Can
5W Ultra Wide Band Power Amplifier 2-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 5W Ultra Wide Band Power Amplifier 2-18GHz Features Wideband Solid State Power Amplifier Psat: + 37dBm Gain: 35 db Supply Voltage: +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V
SERIES YL-N DIVIDERS/COMBINER, POWER IN-PHASE 2-WAY SMA & TYPE N GHz ELECTRICAL PERFORMANCE MECHANICAL OUTLINES GENERAL SPECIFICATIONS
IN-PHASE 2-WAY & TYPE N DIVIDERS/COMBINER, POWER 0.5-18 GHz GENERAL SPECIFICATIONS RF Impedance: 0.5-18.0 GHz 50 Ohms The power handling capability for load VSWR s less than 1 is 1 watt CW and 1kW peak
Parameter Min. Typ. Max. Min. Typ. Max. Units
25W Wide Band Power Amplifier 20-6000MHz Features Wideband Solid State Power Amplifier Psat: +45dBm Typical Gain: 50dB Typical Supply Voltage: +60V DC Electrical Specifications, T A =25 Parameter Min.
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
80W Broadband High Power Amplifier Module 20-1000MHz Electrical Specifications, T A = +25⁰C, VDD = +28V Features Broadband High Power High Efficiency Great Linearity Small Size & Light Weight Low Distortion
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Ultra Wide Band Low Noise Amplifier 0.01GHz~10GHz Electrical Specifications, TA = 25, Vcc = 12V Features Gain: 28dB Typical Noise Figure: 2.5dB Typical High P1dB: 15dBm Typical Supply Voltage: 12V Parameter
30W Wideband Solid State Power Amplifier 6-12GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 30W Wideband Solid State Power Amplifier 6-12GHz Electrical Specifications, TA = +25⁰C, Vdd = +36V Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 6 9 10 12 GHz Gain 60 55 db
2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range
2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz Features Wideband Solid State Power Amplifier Gain: 37dB Typical Psat 35dBm Typical Electrical Specifications, TA = +25⁰C, Vcc = +12V. Parameter Min. Typ.
DC to 400 MHz (40 db Typ. Isolation up to 20 GHz)
Coaxial Low Pass Filter 5Ω DC to 4 MHz (4 db Typ. Isolation up to 2 GHz) The Big Deal Very good rejection, 4 db typ. up to 2 GHz Excellent power handling, 1W Rugged unibody construction CASE STYLE: FF1118
Switch 50W SPDT Pin Diode, Reflective TTL Driver 10 to 3000 MHz
Coaxial Switch 50W SPDT Pin Diode, Reflective TTL Driver 10 to 3000 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C Power L(+20 dbm), M(+28 dbm), U(+30 dbm)
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Ultra Wide Band Power Amplifier 0.7GHz ~ 6GHz Features Gain: 35dB typical Output power 38dBm typical High P1dB: 35 dbm Full Band Supply Voltage: 28V 50 Ohm Matched Electrical Specifications, T A = 25⁰C,
Series CCS-19 Multi-Throw DC-2 GHz Latching Coaxial Switch
PART NUMBER CCS-19 CS-19 DESCRIPTION Commercial Latching Multi-throw, DC-2GHz, with N or TNC connectors Elite Latching Multi-throw, DC-2GHz, with N or TNC connectors The CCS-19/CS-19 is a broadband, multi-throw,
Features. = +25 C, With 0/+5V Control, 50 Ohm System
Typical Applications The HMC244AG16 is ideal for: Telecom Infrastructure Military Radios, Radar & ECM Space Applications Test Instrumentation Functional Diagram Features Low Insertion Loss:.9 Non-Reflective
Features. Parameter Frequency Min. Typ. Max. Units. Return Loss Off State DC - 20 GHz 19 db
Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Hybrids Test Instrumentation SATCOM & Sensors Functional Diagram Features Broadband Performance: DC
FMSW6129 DATA SHEET. SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA.
SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA The FMSW6129 is an SP4T Electromechanical Relay Switch that operates over a wide frequency
Series HD 2A, 60Vdc, True Output Status Feedback, Short-Circuit Protected DC Solid-State Relay
Part* Number HD00CFW DESC Drawing Number HD00CFY 88062-008 HD02CFW HD02CFY 88062-006 HD20CFW HD20CFY 88062-004 HD22CFW HD22CFY 88062-002 HD24CFW HD24CFY Relay Description Solid State Relay (SSR) SSR with
Variable Attenuators (Step & Continuous)
(Step & Continuous) Wide Choice of Attenuation & Frequency Ranges. High Reliability & Long Life Rugged Construction & Connectors Rotational Stops Included on most models Low Cost Designs - Model 3033 Custom
Series CCS-37S/CS-37S Miniature DC 18 GHz Failsafe TRANSFER Coaxial Switch
COAX SWITCHES Series CCS-37S/CS-37S PART NUMBER CCS-37S CS-37S DESCRIPTION Commercial Failsafe TRANSFER, DC-8GHz Elite Failsafe TRANSFER, DC-8GHz The CCS-37S/CS-37S is a long-life high performance transfer
Series CCRT-53S/CRT-53S Internal 50Ω Termination DC-26.5 GHz Failsafe SPDT Coaxial Switch
COAX SWITCHES Series CCRT-53S/CRT-53S PART NUMBER CCRT-53S CRT-53S DESCRIPTION Commercial Failsafe SPDT, DC-26.5GHz, Internal 5Ω Termination Elite Failsafe SPDT, DC-26.5GHz, Internal 5Ω Termination The
9W Power Amplifier 26.2GHz~34GHz
9W Power Amplifier 26.2GHz~34GHz High output power > +39.5 dbm Aerospace and military application High Peak to average handle capability High Linearity and low noise figure All specifications can be modified
LM M-A-300 Surface Mount Pin Diode Limiter, 20 MHz 8 GHz Datasheet
LM200802-M-A-300 Surface Mount Pin Diode Limiter, 20 MHz 8 GHz Datasheet Features Broadband Performance: 20 MHz 8 GHz Surface Mount Limiter in Compact Outline: 8 mm L x 5 mm W x 2.5 mm H Incorporates NIP
RF-LAMBDA. ABSORPTIVE 2-4 GHz 6 Bits 64dB PIN DIODE ATTENUATOR. Absorptive Pin Diode Attenuator 6 Bits 64dB 2-4GHz RFDAT0204G6A.
7 65 6 55 5 5 35 3 25 2 5 5 Frequenc y (GHz) 2- Attenuation Value Insert. Loss 3.dB typ. 3.5dB max. ABSORPTIVE 2- GHz 6 Bits 6dB PIN DIODE ATTENUATOR VSWR Control bits Features Wide Band Operation 2.-.GHz
MICROWAVE ASSEMBLIES, SYSTEMS AND TECHNOLOGIES
MICROWAVE ASSEMBLIES, SYSTEMS AND TECHNOLOGIES ISO 9001 REGISTERED COMPANY PIN Switches Broadband Power Dividers 3 db Hybrids Analog PIN Attenuators Phase Shifters Modulators Couplers Limiters Custom Integrated
SA26B-10 DATA SHEET. 10 db Fixed Attenuator SMA Male To SMA Female Up To 26 GHz Rated To 2 Watts With Passivated Stainless Steel Body.
10 db Fixed Attenuator SMA Male To SMA Female Up To 26 GHz Rated To 2 Watts With Passivated Stainless Steel Body Fairview Microwave carries a broad selection of fixed attenuators with a wide range of attenuation
Series CCS-37K/CS-37K Miniature DC 36 GHz Latching TRANSFER Coaxial Switch
PART NUMBER CCS-37K CS-37K DESCRIPTION Commercial Latching TRANSFER, DC-36GHz Elite Latching TRANSFER, DC-36GHz The CCS-37K/CS-37K is a long-life high performance transfer switch designed for use in 50
FMAM5032 DATA SHEET. 48 db Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 dbm IP3 and SMA.
48 Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 m IP3 and SMA FMAM5032 is a high gain Class A/AB GaN Linear Power Amplifier operating in the 500 to 3000 MHz
100W Power Amplifier 8GHz~11GHz
100W Power Amplifier 8GHz~11GHz High output power +50dBm Aerospace and military application X band radar High Peak to average handle capability All specifications can be modified upon request Parameter
Series CCRT-33S/CRT-33S Internal 50Ω Termination DC 18 GHz/DC-22 GHz Failsafe SPDT Coaxial Switch
COAX SWITCHES Series CCRT-33S/CRT-33S PART NUMBER CCRT-33S CRT-33S DESCRIPTION Commercial Failsafe SPDT, DC-18GHz, Internal 50Ω Termination Elite Failsafe SPDT, DC-22GHz, Internal 50Ω Termination The CCRT-33S/CRT-33S
Series CCRT-33S/CRT-33S Internal 50Ω Termination DC 18 GHz/DC-22 GHz Latching SPDT Coaxial Switch
COAX SWITCHES Series CCRT-33S/CRT-33S PART NUMBER CCRT-33S CRT-33S DESCRIPTION Commercial Latching SPDT, DC-18GHz, Internal 50Ω Termination Elite Latching SPDT, DC-22GHz, Internal 50Ω Termination The CCRT-33S/CRT-33S
Series CCRS-53S/CRS-53S Miniature DC 26.5 GHz Failsafe 2P3T Coaxial Switch
COAX SWITCHES Series CCRS-53S/CRS-53S PART NUMBER CCRS-53S CRS-53S DESCRIPTION Commercial Failsafe 2P3T, DC-26.5GHz Elite Failsafe 2P3T, DC-26.5GHz The CCRS-53S/CRS-53S is a broadband, 2P3T, electromechanical
20W Solid State Power Amplifier 6-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 20W Solid State Power Amplifier 6-18GHz Electrical Specifications, TA = +25⁰C Vcc = +36V Features Psat: + 43.5dBm Gain: 51 db Supply Voltage: +36V 50 Ohm Matched Short Haul / High Capacity
Series CCRS-33S/CRS-33S Miniature DC 18 GHz Failsafe 2P3T Coaxial Switch
COAX SWITCHES Series CCRS-33S/CRS-33S PART NUMBER CCRS-33S CRS-33S DESCRIPTION Commercial Failsafe 2P3T, DC-18GHz Elite Failsafe 2P3T, DC-18GHz The CCRS-33S/CRS-33S is a broadband, 2P3T, electromechanical
dbm Supply Current (Idd) (Vdd=+36V)
Ka Band 6W Power Amplifier 28GHz~42GHz High output power Aerospace and military application High Peak to average handle capability High Linearity and low noise figure All specifications can be modified
SEMS-4079-SP8T-SMA DATA SHEET
SP8T Latching Electro-Mechanical Relay Switch From DC to 18 GHz, 100 Watts with Self Cut Off, Auto Reset, Indicators, Diodes, SMA The SEMS-4079-SP8T-SMA is an SP8T Terminated Electromechanical Relay Switch
High Power PIN Diodes
High Power PIN Diodes Features High Power Handling Low Loss, Low Distortion Voltage Ratings to 1000 Volts Passivated PIN Chip Full Face Bonded Hermetically Sealed Low Inductance Axial Lead, and SMQ Surface
MA4P7470F-1072T. Non Magnetic MELF PIN Diode. Features. Description and Applications. Designed for Automated Assembly
Features Non-Magnetic Package Suitable for MRI Applications Rectangular MELF SMQ Ceramic Package Hermetically Sealed Low Rs for Low Insertion Loss Long τ L for Low Intermodulation Distortion Low Cj for
Series CCS-37S/CS-37S Miniature DC 18 GHz Latching TRANSFER Coaxial Switch
COAX SWITCHES Series CCS-37S/CS-37S PART NUMBER CCS-37S CS-37S DESCRIPTION Commercial Latching TRANSFER, DC-8GHz Elite Latching TRANSFER, DC-8GHz The CCS-37S/CS-37S is a long-life high performance transfer
Series CCR-33S/CR-33S Miniature DC 18 GHz/DC-22 GHz Failsafe SPDT Coaxial Switch
COAX SWITCHES Series CCR-33S/CR-33S PART NUMBER CCR-33S CR-33S DESCRIPTION Commercial Failsafe SPDT, DC-18GHz Elite Failsafe SPDT, DC-22GHz The CCR-33S/CR-33S is a broadband, SPDT, electromechanical, coaxial
Parameter Min. Typ. Max. Units. Frequency Range 8-11 GHz. Saturated Output Power (Psat) 52 dbm. Input Max Power (No Damage) Psat Gain dbm
150W Solid State EMC Benchtop Power Amplifier 8GHz~11GHz Electrical Specifications, T A =25 Features Automatic Calibration Built in Temperature Compensation Adjustable Attenuation: 31.5dB Range, 0.5dB
Agilent 8766/7/8/9K Microwave Single-Pole Multi-Throw Switches
Agilent 8766/7/8/9K Microwave Single-Pole Multi-Throw Switches Product Overview dc to 18, 26.5 GHz Features and description Exceptional reliability, long life (5,000,000 cycles minimum) Excellent repeatability
Surface Mount Limiter, GHz
Surface Mount Limiter, 2.9 3.3 GHz LM2933-Q-B-301 Datasheet Features Surface Mount Limiter in Compact Package: 8 mm L x 5 mm W x 2.5 mm H Incorporates PIN Limiter Diodes, DC Blocks, Schottky Diode & DC
Features. = +25 C, Vdc = +5V
amplifiers Typical Applications The HMC-C is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram v.7 HMC-C Features Ultra Low Phase Noise: -6 dbc/hz @ khz Noise Figure:
RESISTIVE POWER SPLITTERS AND DIVIDERS
RESISTIVE POWER SPLITTERS AND DIVIDERS DC 40.0 GHz S Resistive Power Splitters Usage: : Use in RF and wireless applications where one of the two outputs are included in a leveling loop or used as a reference
MSW3T SP3T Surface Mount High Power PIN Diode Switch
RELEASED MSW3T-3200-150 SP3T Surface Mount High Power PIN Diode Switch Features: Surface Mount SP3T Switch: 9mm x 6mm x 2.5mm Range: 50 MHz to 3.0 GHz Industry Leading Average Power Handling: +50 m (CW)
Programmable Attenuators
Model 3200 Series Programmable Attenuators with optional TTL Interface dc to 3.0 GHz 1 Watt CELL CONFIGURATIONS: Features o Widest Selection of Attenuation Ranges & Step Sizes o Available Express Models:
Keysight Technologies P9400A/C Solid State PIN Diode Transfer Switches
Keysight Technologies P9400A/C Solid State PIN Diode Transfer Switches P9400A 100 MHz to 8 GHz PIN transfer switch P9400C 100 MHz to 18 GHz PIN transfer switch Technical Overview Key Features Minimize
narda today narda today RF & Microwave Product Overview w w w. nardamicrowave. com
narda today narda today RF & Microwave Product Overview w w w. nardamicrowave. com Table of Contents This booklet presents an overview of Narda s RF & Microwave products. Details and specifications can
Series CCS-47/CS-47 High Power DC 12 GHz Failsafe TRANSFER Coaxial Switch
COAX SWITCHES Series CCS-47/CS-47 PART NUMBER CCS-47 CS-47 DESCRIPTION Commercial Failsafe TRANSFER, DC-GHz Elite Failsafe TRANSFER, DC-GHz The CCS-47/CS-47 is a long-life high performance transfer switch
HILNA LS Low Noise Amplifier
HILNA LS Low Noise Amplifier 1000-3000 MHz 50 db Gain P/N: HILNA-LS (includes NW-LN-ACC-CB4MUA interface cable) NuWaves HILNA LS is a broadband low noise amplifier covering L- & S-bands, and designed to
Series CCRS-53S/CRS-53S Miniature DC 26.5 GHz Latching 2P3T Coaxial Switch
COAX SWITCHES Series CCRS-53S/CRS-53S PART NUMBER CCRS-53S CRS-53S DESCRIPTION Commercial Latching 2P3T, DC-26.5GHz Elite Latching 2P3T, DC-26.5GHz The CCRS-53S/CRS-53S is a broadband, 2P3T, electromechanical
High-Reliability and Environment Qualified Components
High-Reliability and Environment Qualified Components Introduction Ruggedness and reliability have been designed in across our product lines and proven in the field. This section of our catalog provides
Series CCP-32N Low PIM DC 3 GHz Latching SPDT Coaxial Switch
COAX SWITCHES Series CCP-32N PART NUMBER CCP-32N DESCRIPTION Commercial Latching SPDT, DC-3GHz, Low PIM These switches are designed to have extremely low passive intermodulation for use in narrow bandwidth
Features OBSOLETE. = +5V in a 50 Ohm System. Parameter Frequency Min. Typ. Max. Units DC GHz DC GHz
Typical Applications The HMC252QS24 / HMC252QS24E is ideal for: Base Station CATV / DBS MMDS & WirelessLAN Test Equipment Functional Diagram Features Low Insertion Loss (2 GHz):.9 Single Positive Supply:
MSW2T /MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch
PRELIMINARY MSW2T-2000-199/MSW2T-2001-199/MSW2T-2002-199 SP2T Surface Mount High Power PIN Diode Switch Features: Wide Operating Frequency Band: 50 MHz to 6 GHz Surface Mount SP2T Switch 5mm x 8mm x 2.5mm
Low Noise, High Power DFB Laser Part #LN Pxx
Ver 2b, 7-5-2018 Product Specification 5800 Uplander Way Culver City, CA 90230 Tel: (310) 642-7975 sales@apichip.com www.apichip.com Low Noise, High Power DFB Laser Part #LN-1550-165-Pxx PRODUCT FEATURES
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Electrical Specifications, T A =25 Ultra Wide Band Low Noise Amplifier AC 110V/220V 0.01-20GHz Parameters Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.01 10 10 20 GHz Gain 28 30 26 28 db Gain
Series CCP-47N Low PIM DC 3 GHz Latching TRANSFER Coaxial Switch
COAX SWITCHES Series CCP-47N PART NUMBER CCP-47N DESCRIPTION Commercial Latching TRANSFER, DC-3GHz, Low PIM These switches are designed to have extremely low passive intermodulation for use in narrow bandwidth
Agilent 87222C/D/E Coaxial Transfer Switches dc to 26.5, 40, 50 GHz
Agilent 87C/D/E Coaxial Transfer Switches dc to 6.5, 0, 50 GHz Technical Overview High Performance Transfer Switches for Micro wave and RF Instrumentation and Systems Exceptional repeatability for more
PIN Diode Driver (Positive Voltage)
(Positive Voltage) MPD3T28125-701 Datasheet Features High output voltage and high output current PIN diode driver in surface mount package Usable with MSW3100 series T-R and symmetrical high power SP3T
Series H-33S DC up to 26.5 GHz Latching SPDT Space Grade Coaxial Switch
COAX SWITCHES Series H-33S PART NUMBER H-33S DESCRIPTION Space Grade Latching SPDT, Teledyne Coax Switches H-33S Series RF Coaxial Switch is a Commercial Off-The Shelf (COTS) product suitable for high
SP4T RF Switch 50 Ω Absorptive RF switch 1 to 6000 MHz Internal driver, Single Supply Voltage 2.3V to 3.6V
Solid state SP4T RF Switch 50 Ω Absorptive RF switch 1 to 00 MHz Internal driver, Single Supply Voltage 2.3V to 3.6V The Big Deal High isolation, 57 db up to 2.7 GHz High linearity, IP3 +58 dbm at 1900