Solid State PIN Control Products

Size: px
Start display at page:

Download "Solid State PIN Control Products"

Transcription

1 Power Monitors d Sensors Description Solid State Control GHz d 2-18 GHz High Performce Switches y Reflective d Absorptive Introduction y SPST thru SP6T d Trsfer (Stdard) y High Speed 15 ns y High Isolation up to db y Low Insertion Loss y Small Package Size y Integral TTL Drivers y Hermetically Sealed The performce series of 0.5 to 18 GHz d 2 to 18 GHz hermetically sealed switches offers fast switching speed d low insertion loss in compact packages. These switches use the identical circuits employed in Narda s topof-the-line Super Slim Series. They are ideal for connectorized applications where the absolutely thinnest profile is not required. All models include integral drivers with reverse voltage protection. The drivers are TTL compatible d are tailored to each RF circuit to give optimum switching performce. The small size, high speed, broad bdwidth d low insertion loss make these switches ideal for EW systems, automatic test equipment, d simulators. nardaeast@l-3com.com TEL: compy 311

2 Introduction Solid State Control Specifications Reflective Switches, SMA (F), 0.5 to 18 GHz Power Monitors d Sensors SUPPLY SP212DHS SPST SP212DHS- SPST SP122DHS SP2T SP132DHS SP3T SP142DHS SP4T SP152DHS SP5T 20 SP162DHS SP6T Absorptive Switches, SMA (F), 0.5 to 18 GHz SUPPLY to -15 V SP212DHTS SPST SP122DHTS SP2T SP132DHTS SP3T SP142DHTS SP4T SP152DHTS SP5T SP162DHTS SP6T compy nardaeast@l-3com.com TEL:

3 Power Monitors d Sensors Introduction Solid State Control Reflective Switches, SMA (F), 2 to 18 GHz SUPPLY SP213DHS SPST 15 0 SP213DHS- SPST 15 0 SP123DHS SP2T SP123DHS- SP2T SP133DHS SP3T SP143DHS SP4T SP153DHS SP5T 20 SP163DHS SP6T Trsfer Switches, SMA (F), 2 to 18 GHz SWITCHING TIME SUPPLY XSP323DHS XFER Absorptive Switches, SMA (F), 2 to 18 GHz SUPPLY SP213DHTS SPST SP213DHTS- SPST SP123DHTS SP2T SP133DHTS SP3T SP143DHTS SP4T SP153DHTS SP5T SP163DHTS SP6T nardaeast@l-3com.com TEL: compy 313

4 Introduction Solid State Control Power Monitors d Sensors Electrical Specifications TTL CONTROL LOGIC Logic 0 (0-0.8 V, 1.6 ma max. 0.4 V) = Insertion Loss Logic 1 (-5.5 V, 40 μa max. V) = Isolation FOR TRANSFER SWITCH (XSP323DHS) Logic 0: J1-J4 d J2-J3 at Insertion Loss Logic 1: J2-J2 d J4-J3 at Insertion Loss T on = % TTL to 90% of RF voltage T off = % TTL to 10% of RF voltage SWITCHING RATE Reflective Models 5 MHz max. duty cycle Absorptive Models 2 MHz max. duty cycle DRIVER Reverse voltage protected SURVIVAL at 25 C (Cold Switching) Models SP213DHS d SP213DHS W CW, 20 W Peak (1μs max. pulse width, 7½% duty cycle) All other 2 to 18 GHz models W CW, 20 W Peak (1μs max. pulse width, 5% duty cycle) All 0.5 to 18 GHz models...0 mw CW, 10 W Peak (1μs max. pulse width, 5% duty cycle) Derate linearly to % at +95 C Environmental Specifications TEMPERATURE Operating -54 C to +95 C Storage - C to +125 C HUMIDITY Per MIL-STD-202F, method 103B, condition B (96 hours at 95% R.H.) SHOCK Per MIL-STD-202F, method 213B, condition B (75 G, 6 ms) ALTITUDE Per MIL-STD-202F, method 105C, condition B (,000 feet) VIBRATION Per MIL-STD-202F, method 204D, condition B (.06 double amplitude or 15 G, whichever is less) THERMAL SHOCK Per MIL-STD-202F, method 107D, condition A (5 cycles) Options y Very Low Loss Video Leakage y Inverted TTL Logic Control y BCD Decoder Driver y Package Configuration y Over Voltage Protection 314 compy nardaeast@l-3com.com TEL:

5 Power Monitors d Sensors Outline Drawings Introduction Solid State Control TOL: XX = ±.02 (.) TOL: XX = ±.02 (.) SP213DHS, SP213DHTS, SP212DHTS, SP212DHS SP213DHS-, SP213DHTS-, SP212DHS- TOL: XX = ±.02 (.) TOL: XX = ±.02 (.) SP123DHS, SP123DHTS, SP122DHTS, SP122DHS SP133DHS, SP133DHTS, SP132DHTS, SP132DHS Dimensions in inches (mm in parentheses), unless otherwise specified. nardaeast@l-3com.com TEL: compy 315

6 Introduction Solid State Control Outline Drawings Power Monitors d Sensors TOL: XX = ±.02 (.) SP143DHS, SP143DHTS, SP142DHTS, SP142DHS SP153DHS, SP153DHTS, SP152DHTS, SP152DHS SP163DHS, SP163DHTS, SP162DHTS, SP162DHS Dimensions in inches (mm in parentheses), unless otherwise specified. XSP323DHS 316 compy nardaeast@l-3com.com TEL:

Solid State PIN Control Products

Solid State PIN Control Products Power Monitors d Sensors Description 0.5-18 GHz d 2-18 GHz Super-Slim High Performce Drop-In Switches y Reflective d Absorptive Introduction y SPST thru SP6T d Trsfer (Stdard) y High Speed y High Isolation

More information

Solid State PIN Control Products

Solid State PIN Control Products Solid State Control 2-18 GHz High Speed Switched-Bit Attenuators y Very High Speed y Precise Attenuation over Frequency Bd y Small Package Size y Low Insertion Loss y Hermetically Sealed Options Available

More information

Stocked Electro-Mechanical Switches

Stocked Electro-Mechanical Switches DC-6.5 GHz SPT SEM Series y Stdard Features Include: Latching Models, Failsafe Models, TTL Logic Control, Indicator Circuits Specifications SPT, SMA (F), DC to 8 GHz MODEL FEATURES ACTUATING CURRENT (ma

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Absorptive Coaxial SP3T Switch 0.5-50GHz Electrical Specifications, T A = +25 C, Vdd = +5V/-5V, TTL = 0 / +5V Description PN: SP3T Absorptive Switch Low Power Cold Switching Parameter Min Typ Max Min Typ

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Reflective Coaxial SP2T Switch 50 700MHz Electrical Specifications, TA = +25 C, Vdd = +5V/-28V, TTL = 0 / +5V Description Features Wide Band Operation 50-700MHz TTL compatible driver included Fast Switching

More information

Standard Custom Electro-Mechanical Switches

Standard Custom Electro-Mechanical Switches Introduction Power Monitors DC-10 GHz, Type N d TNC SP7T-SP8T Series 073-083 RF Performce Freq. Rge (GHz) DC-3 3-8 8-10 VSWR (max.) 1.2 1.35 1.5 Insertion Loss (db max.) Isolation (db min.) Additional

More information

Standard Custom Electro-Mechanical Switches

Standard Custom Electro-Mechanical Switches DC-26.5 GHz, SMA DP2T Series 136 Trsfer Switch RF Performce Freq. Rge (GHz) DC-3 3-8 8-12.4 12.4-18 18-26.5 VSWR (max.) 1.2 1.3 1.4 1.5 1.7 Insertion Loss (db max.) Isolation (db min.) Additional Specifications

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Absorptive Coaxial SP3T Switch 8-43.5 Electrical Specifications, T A = +25 C, Vdd = +5V/-5V, TTL = 0 / +5V Description PN: SP3T Absorptive Switch Low Power Cold Switching Parameters Min. Typ. Max. Min.

More information

Standard Custom Electro-Mechanical Switches

Standard Custom Electro-Mechanical Switches Power Monitors DC-26.5 GHz, SMA SP3T-SP6T Series 030-060 RF Performce Freq. Rge (GHz) DC-3 3-8 8-12.4 12.4-18 18-26.5 VSWR (max.) 1.2 1.3 1.4 1.5 1.8 Insertion Loss (db max.) Isolation (db min.) 0.2 0.3

More information

PAGE 1/12 ISSUE SERIES DP3T/SPDT PART NUMBER R595 XXX XXX

PAGE 1/12 ISSUE SERIES DP3T/SPDT PART NUMBER R595 XXX XXX PAGE 1/12 ISSUE 22-06-2018 SERIES DP3T/SPDT PART NUMBER R595 XXX XXX DP3T-SPDT Coaxial Switches DC to 6 GHz, DC to 20 GHz, DC to 26.5 GHz, DC to 40 GHz Radiall s PLATINUM SERIES switches are optimised

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS LEADER OF RF BROADBAND SOLTIONS Absorptive Coaxial SP2T Switch.2 ~ Features Wide Band Operation.2- TTL compatible driver included Fast Switching Speed Low Insertion Loss and High Isolation Customization

More information

TITANIUM SERIES R 51 PART NUMBER SELECTION. High Performance Multiport Switches. Our Most Important Connection is with You.

TITANIUM SERIES R 51 PART NUMBER SELECTION. High Performance Multiport Switches. Our Most Important Connection is with You. PART NUMBER SELECTION Models: 2: Without 50 Ω terminations 4: With 50 Ω terminations RF Connectors: 3: SMA up to 6 GHz 4: SMA up to 20 GHz F: SMA up to 26.5 GHz 8: SMA 2.9 up to 40 GHz (1) Radiall s TITANIUM

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Reflective Coaxial SP2T Switch DC - 6 Electrical Specifications, TA = +25 C, Vcc +5V, TTL= 0 / +5V Description Features Wide Band Operation DC-6 TTL compatible driver included Fast Switching Speed Low

More information

Isolation db Input VSWR : 1 Output VSWR : 1 RF Input Power (Pulsed, 10% Duty Cycle, 20us pulse

Isolation db Input VSWR : 1 Output VSWR : 1 RF Input Power (Pulsed, 10% Duty Cycle, 20us pulse LEADER OF RF BROADBAND SOLTIONS Reflective Coaxial SP2T Switch.5-6 Electrical Specifications, T A = +25 C, Vdd = +5V, TTL = / +5V Description PN: SP2T Reflective Switch High Power Cold Switching Parameter

More information

Applications: WEIGHT: grams (typical)

Applications: WEIGHT: grams (typical) RADIATION TOLERANT VDC A POWER MOSFET OPTOCOUPLER Mii Features: This Design Tested to krad (Si) Total Dose Hermetically Sealed in Surface Mount Package Low On-resistance A Continuous Output Current Performance

More information

100W Wide Band Power Amplifier 6GHz~18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz Gain db

100W Wide Band Power Amplifier 6GHz~18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz Gain db 100W Wide Band Power Amplifier 6GHz~18GHz Features Wideband Solid State Power Amplifier Psat: +50dBm Gain: 75 db Typical Supply Voltage: +48V On board microprocessor driven bias controller. Electrical

More information

SDA SMA DATA SHEET

SDA SMA DATA SHEET 0 to 60 db 10 Bit Programmable TTL Controlled Step Attenuator With a 006 db Step SMA Female To SMA Female From 500 MHz To 18 GHz The is a Non-Reflective 10 Bit Programmable 60 db Pin Diode Attenuator with

More information

Ultra Wide Band Low Noise Amplifier GHz. Electrical Specifications, TA = +25⁰C, With Vg= -5V, Vcc = +4V ~ +7V, 50 Ohm System

Ultra Wide Band Low Noise Amplifier GHz. Electrical Specifications, TA = +25⁰C, With Vg= -5V, Vcc = +4V ~ +7V, 50 Ohm System Ultra Wide Band Low Noise Amplifier 0.5 46GHz Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.5 20 20 46 GHz Gain 13 13 db Gain Variation Over Temperature (-45 ~ +85) ±3 ±2 db Noise Figure

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Absorptive Voltage Controlled Attenuator 4-8GHz Features Wide Band Operation 4-8GHz Wide Attenuation Range 30dB Absorptive Topology Singe Control Operation Electrical Specifications, T A = 25 C Description

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS 50W Broadband High Power Amplifier Module 500 2500MHz Electrical Specifications, T A = +25⁰C, Vdd = +28V Features Ultra-broadband Amplifier Module Small and lightweight Supply Voltage: +28V Parameter Min.

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS LEADER OF RF BROADBAND SOLTIONS Absorptive Coaxial SPST Switch - RFSPSTAG Features Wide Band Operation - TTL compatible driver included Fast Switching Speed Low Insertion Loss and High Isolation Electrical

More information

8W Wide Band Power Amplifier 1GHz~22GHz

8W Wide Band Power Amplifier 1GHz~22GHz 8W Wide Band Power Amplifier 1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 50 db Typical Psat: +39 dbm Supply Voltage: +36V Electrical Specifications, T A = +25⁰C Typical Applications

More information

4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz

4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz 4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 40 db Typical Psat: +37 dbm Typical Noise Figure: 3dB Typical Supply Voltage: +24V (-NP) / +36V (-WP)

More information

Series CCT-58S/CT-58S Multi-Throw DC-26.5 GHz Normally Open Coaxial Switch

Series CCT-58S/CT-58S Multi-Throw DC-26.5 GHz Normally Open Coaxial Switch COAX SWITCHES Series CCT-58S/CT-58S PART NUMBER CCT-58S CT-58S DESCRIPTION Commercial Normally Open Multi-throw, DC-26.5GHz Elite Normally Open Multi-throw, DC-26.5GHz The CCT-58S/CT-58S is an internally

More information

Series CCT-38S Multi-Throw DC 12 GHz, SP7T & SP8T Normally Open Coaxial Switch

Series CCT-38S Multi-Throw DC 12 GHz, SP7T & SP8T Normally Open Coaxial Switch COAX SWITCHES Series CCT-38S PART NUMBER CCT-38S DESCRIPTION Commercial Normally Open Multi-throw, DC-12 GHz The CCT-38S is a broadband, multi-throw, electromechanical coaxial switch designed to switch

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS 80W Broadband High Power Amplifier Module 20-1000MHz Electrical Specifications, T A = +25⁰C, VDD = +28V Features Broadband High Power High Efficiency Great Linearity Small Size & Light Weight Low Distortion

More information

5W Ultra Wide Band Power Amplifier 2-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units

5W Ultra Wide Band Power Amplifier 2-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units 7-3 RF-LAMBDA 5W Ultra Wide Band Power Amplifier 2-18GHz Features Wideband Solid State Power Amplifier Psat: + 37dBm Gain: 35 db Supply Voltage: +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V

More information

Parameter Min. Typ. Max. Min. Typ. Max. Units

Parameter Min. Typ. Max. Min. Typ. Max. Units 25W Wide Band Power Amplifier 20-6000MHz Features Wideband Solid State Power Amplifier Psat: +45dBm Typical Gain: 50dB Typical Supply Voltage: +60V DC Electrical Specifications, T A =25 Parameter Min.

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Voltage Control Phase Shifter 2-4GHz Features Wide Band Operation 2-4GHz 360 Phase Shift Low Insertion Loss and Low Phase Error Singe Control Operation Customization available upon request Electrical Specifications,

More information

Series CCT-58S/CT-58S Multi-Throw DC-26.5 GHz Normally Open Coaxial Switch

Series CCT-58S/CT-58S Multi-Throw DC-26.5 GHz Normally Open Coaxial Switch COAX SWITCHES Series CCT-58S/CT-58S PART NUMBER CCT-58S CT-58S DESCRIPTION Commercial Normally Open Multi-throw, DC-26.5GHz Elite Normally Open Multi-throw, DC-26.5GHz The CCT-58S/CT-58S is an internally

More information

Series CCT-38S/CT-38S Multi-Throw DC 18 GHz/DC-22 GHz Normally Open Coaxial Switch

Series CCT-38S/CT-38S Multi-Throw DC 18 GHz/DC-22 GHz Normally Open Coaxial Switch COAX SWITCHES Series CCT-38S/CT-38S PART NUMBER CCT-38S CT-38S DESCRIPTION Commercial Normally Open Multi-throw, DC-18GHz Elite Normally Open Multi-throw, DC-22GHz The CCT-38S/CT-38S is an internally terminated,

More information

30W Solid State High Power Amplifier 2-6 GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units

30W Solid State High Power Amplifier 2-6 GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units 7-3 RF-LAMBDA 30W Solid State High Power Amplifier 2-6 GHz Features Wideband Solid State Power Amplifier Psat: +45dBm Gain: 50dB Supply Voltage: +36V Electrical Specifications, T A = +25⁰C, Vcc = +36V

More information

Series CCR-58S/CR-58S Multi-Throw DC 26.5 GHz Normally Open Coaxial Switch

Series CCR-58S/CR-58S Multi-Throw DC 26.5 GHz Normally Open Coaxial Switch PART NUMBER CCR-58S CR-58S DESCRIPTION Commercial Normally Open Multi-throw, DC-6.5GHz Elite Normally Open Multi-throw, DC-6.5GHz The CCR-58S/CR-58S is a broadband, multi-throw, electromechanical coaxial

More information

30W Wideband Solid State Power Amplifier 6-12GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units

30W Wideband Solid State Power Amplifier 6-12GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units 7-3 RF-LAMBDA 30W Wideband Solid State Power Amplifier 6-12GHz Electrical Specifications, TA = +25⁰C, Vdd = +36V Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 6 9 10 12 GHz Gain 60 55 db

More information

2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range

2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range 2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz Features Wideband Solid State Power Amplifier Gain: 37dB Typical Psat 35dBm Typical Electrical Specifications, TA = +25⁰C, Vcc = +12V. Parameter Min. Typ.

More information

Mii RADIATION TOLERANT, 90V - 0.8A DUAL POWER MOSFET OPTOCOUPLERS. Features: Applications:

Mii RADIATION TOLERANT, 90V - 0.8A DUAL POWER MOSFET OPTOCOUPLERS. Features: Applications: 55 RADIATION TOLERANT, 90V - 0.8A DUAL POWER MOSFET OPTOCOUPLERS Mii Features: Designed for 100 krad(si) Total Dose 8-Pin Dual-In-Line Hermetic Package Performance over 55 C to +15 C Compact Isolation

More information

20W Solid State Power Amplifier 26.2GHz~34GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz.

20W Solid State Power Amplifier 26.2GHz~34GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz. 20W Solid State Power Amplifier 26.2GHz~34GHz Features Wideband Solid State Power Amplifier Gain: 65dB Typical Psat: +43dBm Typical Supply : +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V Typical

More information

Series CCT-59S Multi-Throw DC-18 GHz, SP7T & SP8T Latching Coaxial Switch, Internal 50Ω Termination

Series CCT-59S Multi-Throw DC-18 GHz, SP7T & SP8T Latching Coaxial Switch, Internal 50Ω Termination COAX SWITCHES Series CCT-59S PART NUMBER CCT-59S DESCRIPTION Commercial Latching Multi-throw, DC-18GHz The CCT-59S is a broadband, multi-throw, electromechanical coaxial switch designed to switch a microwave

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS LEADER OF RF BROADBAND SOLTIONS Absorptive Coaxial SP8T Switch. -. RFSP8TAG Electrical Specifications, TA = + C, Vdd = +V/-V, TTL = / +V Description Features ltra Wide Band Operation.-. TTL compatible

More information

LM M-A-300 Surface Mount Pin Diode Limiter, 20 MHz 8 GHz Datasheet

LM M-A-300 Surface Mount Pin Diode Limiter, 20 MHz 8 GHz Datasheet LM200802-M-A-300 Surface Mount Pin Diode Limiter, 20 MHz 8 GHz Datasheet Features Broadband Performance: 20 MHz 8 GHz Surface Mount Limiter in Compact Outline: 8 mm L x 5 mm W x 2.5 mm H Incorporates NIP

More information

DC-20 GHz Distributed Driver Amplifier. Parameter Min Typ Max Min Typ Max Units

DC-20 GHz Distributed Driver Amplifier. Parameter Min Typ Max Min Typ Max Units 7-3 RF-LAMBDA DC-20 GHz Distributed Driver Amplifier Electrical Specifications, T A =25 Features Ultra wideband performance Positive gain slope High output power Low noise figure Microwave radio and VSAT

More information

Series CCT-59S/CT-59S Multi-Throw DC-26.5 GHz Latching Coaxial Switch

Series CCT-59S/CT-59S Multi-Throw DC-26.5 GHz Latching Coaxial Switch PART NUMBER CCT-59S CT-59S DESCRIPTION Commercial Latching Multi-throw, DC-26.5GHz Elite Latching Multi-throw, DC-26.5GHz The CCT-59S/CT-59S is an Internally Terminated broadband, multi-throw, electromechanical

More information

MAGNETIC-LATCHING DPDT HALF-SIZE CRYSTAL CAN HIGH POWER RF RELAY DC-3 GHZ

MAGNETIC-LATCHING DPDT HALF-SIZE CRYSTAL CAN HIGH POWER RF RELAY DC-3 GHZ MAGNETIC-LATCHING DPDT HALF-SIZE CRYSTAL CAN HIGH POWER RF RELAY DC-3 GHZ SERIES RELAY TYPE Commercial, DPDT, High Power, Half-Size Crystal Can Relay Commercial, DPDT, High Power, Half-Size Crystal Can

More information

MICROWAVE ASSEMBLIES, SYSTEMS AND TECHNOLOGIES

MICROWAVE ASSEMBLIES, SYSTEMS AND TECHNOLOGIES MICROWAVE ASSEMBLIES, SYSTEMS AND TECHNOLOGIES ISO 9001 REGISTERED COMPANY PIN Switches Broadband Power Dividers 3 db Hybrids Analog PIN Attenuators Phase Shifters Modulators Couplers Limiters Custom Integrated

More information

LB480A Pulse Profiling USB PowerSensor+ Data Sheet

LB480A Pulse Profiling USB PowerSensor+ Data Sheet Key PowerSensor+ Specifications 100 MHz to 8 GHz (functional to 10 GHz) -60 dbm to +20 dbm 1.95% Total Error* 1.09:1 VSWR (-27 db Return Loss) * Measuring a well matched DUT (-20 dbm @ 1 GHz) Measurement

More information

MACH-ZEHNDER MODULATOR DRIVERS JSX Series

MACH-ZEHNDER MODULATOR DRIVERS JSX Series FEATURES Specifically designed for fiber optic applications Standard models for 10, 10.7 and 12.5 Gb/s data rates Product line includes linear and limiting amplifiers Gain control available Compatible

More information

Series CCR-39S/CR-39S Multi-Throw DC-18 GHz/DC-22 GHz Latching Coaxial Switch

Series CCR-39S/CR-39S Multi-Throw DC-18 GHz/DC-22 GHz Latching Coaxial Switch PART NUMBER CCR-39S CR-39S DESCRIPTION Commercial Latching Multi-throw, DC-8GHz Elite Latching Multi-throw, DC-22GHz The CCR-39S/CR-39S is a broadband, multi-throw, electromechanical coaxial switch designed

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Ultra Wide Band Low Noise Amplifier 0.01GHz~10GHz Electrical Specifications, TA = 25, Vcc = 12V Features Gain: 28dB Typical Noise Figure: 2.5dB Typical High P1dB: 15dBm Typical Supply Voltage: 12V Parameter

More information

Note: This model is same as ZFSWA2R-63DR+ except RF1 and RF2 ports are interchanged.

Note: This model is same as ZFSWA2R-63DR+ except RF1 and RF2 ports are interchanged. Absorptive SPDT RF Switch 50Ω 500-6000 MHz The Big Deal Wide bandwidth 500 to 6000 MHz Very high isolation, 65 at 1GHz Very fast switching, 35ns Rugged case with internal hermetically sealed ceramic semi-conductor

More information

Series CCS-19 Multi-Throw DC-2 GHz Latching Coaxial Switch

Series CCS-19 Multi-Throw DC-2 GHz Latching Coaxial Switch PART NUMBER CCS-19 CS-19 DESCRIPTION Commercial Latching Multi-throw, DC-2GHz, with N or TNC connectors Elite Latching Multi-throw, DC-2GHz, with N or TNC connectors The CCS-19/CS-19 is a broadband, multi-throw,

More information

Series CCS-37K/CS-37K Miniature DC 36 GHz Latching TRANSFER Coaxial Switch

Series CCS-37K/CS-37K Miniature DC 36 GHz Latching TRANSFER Coaxial Switch PART NUMBER CCS-37K CS-37K DESCRIPTION Commercial Latching TRANSFER, DC-36GHz Elite Latching TRANSFER, DC-36GHz The CCS-37K/CS-37K is a long-life high performance transfer switch designed for use in 50

More information

Series CCR-48K/CR-48K Multi-Throw DC 40 GHz Normally Open Coaxial Switch

Series CCR-48K/CR-48K Multi-Throw DC 40 GHz Normally Open Coaxial Switch COAX SWITCHES Series CCR-48K/CR-48K PART NUMBER CCR-48K CR-48K DESCRIPTION Commercial Normally Open Multi-throw, DC-40GHz Elite Normally Open Multi-throw, DC-40GHz The CCR-48K/CR-48K is a broadband, multi-throw,

More information

Keysight Technologies P9400A/C Solid State PIN Diode Transfer Switches

Keysight Technologies P9400A/C Solid State PIN Diode Transfer Switches Keysight Technologies P9400A/C Solid State PIN Diode Transfer Switches P9400A 100 MHz to 8 GHz PIN transfer switch P9400C 100 MHz to 18 GHz PIN transfer switch Technical Overview Key Features Minimize

More information

20W Solid State Power Amplifier 6-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units

20W Solid State Power Amplifier 6-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units 7-3 RF-LAMBDA 20W Solid State Power Amplifier 6-18GHz Electrical Specifications, TA = +25⁰C Vcc = +36V Features Psat: + 43.5dBm Gain: 51 db Supply Voltage: +36V 50 Ohm Matched Short Haul / High Capacity

More information

Digital Attenuator, 31.5 db, 6-Bit, TTL Driver, DC-4.0 GHz. Parameter Test Conditions Frequency Units Min Typical Max

Digital Attenuator, 31.5 db, 6-Bit, TTL Driver, DC-4.0 GHz. Parameter Test Conditions Frequency Units Min Typical Max Digital Attenuator, 31.5 db, 6-Bit, TTL Driver, DC-4.0 GHz V 10 Features Attenuation: 0.5 db Steps to 31.5 db Low DC Power Consumption Small Footprint, JEDEC Package Integral TTL Driver 50 ohm Impedance

More information

LB480A Pulse Profiling USB PowerSensor+ Data Sheet

LB480A Pulse Profiling USB PowerSensor+ Data Sheet Key PowerSensor+ Specifications 50 MHz to 8 GHz (functional to 10 GHz) - 60 dbm to +20 dbm 1.95% Total Error* 1.09:1 VSWR (-27 db Return Loss) * Measuring a well matched DUT (-20 dbm @ 1 GHz) No Zero No

More information

Series CCRT-53S/CRT-53S Internal 50Ω Termination DC-26.5 GHz Failsafe SPDT Coaxial Switch

Series CCRT-53S/CRT-53S Internal 50Ω Termination DC-26.5 GHz Failsafe SPDT Coaxial Switch COAX SWITCHES Series CCRT-53S/CRT-53S PART NUMBER CCRT-53S CRT-53S DESCRIPTION Commercial Failsafe SPDT, DC-26.5GHz, Internal 5Ω Termination Elite Failsafe SPDT, DC-26.5GHz, Internal 5Ω Termination The

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Ultra Wide Band Power Amplifier 0.7GHz ~ 6GHz Features Gain: 35dB typical Output power 38dBm typical High P1dB: 35 dbm Full Band Supply Voltage: 28V 50 Ohm Matched Electrical Specifications, T A = 25⁰C,

More information

Series CCS-37S/CS-37S Miniature DC 18 GHz Failsafe TRANSFER Coaxial Switch

Series CCS-37S/CS-37S Miniature DC 18 GHz Failsafe TRANSFER Coaxial Switch COAX SWITCHES Series CCS-37S/CS-37S PART NUMBER CCS-37S CS-37S DESCRIPTION Commercial Failsafe TRANSFER, DC-8GHz Elite Failsafe TRANSFER, DC-8GHz The CCS-37S/CS-37S is a long-life high performance transfer

More information

Features OBSOLETE. = +5V in a 50 Ohm System. Parameter Frequency Min. Typ. Max. Units DC GHz DC GHz

Features OBSOLETE. = +5V in a 50 Ohm System. Parameter Frequency Min. Typ. Max. Units DC GHz DC GHz Typical Applications The HMC252QS24 / HMC252QS24E is ideal for: Base Station CATV / DBS MMDS & WirelessLAN Test Equipment Functional Diagram Features Low Insertion Loss (2 GHz):.9 Single Positive Supply:

More information

PIN Diode Driver (Positive Voltage)

PIN Diode Driver (Positive Voltage) (Positive Voltage) MPD3T28125-701 Datasheet Features High output voltage and high output current PIN diode driver in surface mount package Usable with MSW3100 series T-R and symmetrical high power SP3T

More information

Low Noise, High Power DFB Laser Part #LN Pxx

Low Noise, High Power DFB Laser Part #LN Pxx Ver 2b, 7-5-2018 Product Specification 5800 Uplander Way Culver City, CA 90230 Tel: (310) 642-7975 sales@apichip.com www.apichip.com Low Noise, High Power DFB Laser Part #LN-1550-165-Pxx PRODUCT FEATURES

More information

HILNA LS Low Noise Amplifier

HILNA LS Low Noise Amplifier HILNA LS Low Noise Amplifier 1000-3000 MHz 50 db Gain P/N: HILNA-LS (includes NW-LN-ACC-CB4MUA interface cable) NuWaves HILNA LS is a broadband low noise amplifier covering L- & S-bands, and designed to

More information

Series CCR-33S/CR-33S Miniature DC 18 GHz/DC-22 GHz Failsafe SPDT Coaxial Switch

Series CCR-33S/CR-33S Miniature DC 18 GHz/DC-22 GHz Failsafe SPDT Coaxial Switch COAX SWITCHES Series CCR-33S/CR-33S PART NUMBER CCR-33S CR-33S DESCRIPTION Commercial Failsafe SPDT, DC-18GHz Elite Failsafe SPDT, DC-22GHz The CCR-33S/CR-33S is a broadband, SPDT, electromechanical, coaxial

More information

Series CCS-37S/CS-37S Miniature DC 18 GHz Latching TRANSFER Coaxial Switch

Series CCS-37S/CS-37S Miniature DC 18 GHz Latching TRANSFER Coaxial Switch COAX SWITCHES Series CCS-37S/CS-37S PART NUMBER CCS-37S CS-37S DESCRIPTION Commercial Latching TRANSFER, DC-8GHz Elite Latching TRANSFER, DC-8GHz The CCS-37S/CS-37S is a long-life high performance transfer

More information

Features. Parameter Frequency Min. Typ. Max. Units. Return Loss Off State DC - 20 GHz 19 db

Features. Parameter Frequency Min. Typ. Max. Units. Return Loss Off State DC - 20 GHz 19 db Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Hybrids Test Instrumentation SATCOM & Sensors Functional Diagram Features Broadband Performance: DC

More information

Series CCRT-33S/CRT-33S Internal 50Ω Termination DC 18 GHz/DC-22 GHz Failsafe SPDT Coaxial Switch

Series CCRT-33S/CRT-33S Internal 50Ω Termination DC 18 GHz/DC-22 GHz Failsafe SPDT Coaxial Switch COAX SWITCHES Series CCRT-33S/CRT-33S PART NUMBER CCRT-33S CRT-33S DESCRIPTION Commercial Failsafe SPDT, DC-18GHz, Internal 50Ω Termination Elite Failsafe SPDT, DC-22GHz, Internal 50Ω Termination The CCRT-33S/CRT-33S

More information

Features. = +25 C, With 0/+5V Control, 50 Ohm System

Features. = +25 C, With 0/+5V Control, 50 Ohm System Typical Applications The HMC244AG16 is ideal for: Telecom Infrastructure Military Radios, Radar & ECM Space Applications Test Instrumentation Functional Diagram Features Low Insertion Loss:.9 Non-Reflective

More information

Series CCRT-33S/CRT-33S Internal 50Ω Termination DC 18 GHz/DC-22 GHz Latching SPDT Coaxial Switch

Series CCRT-33S/CRT-33S Internal 50Ω Termination DC 18 GHz/DC-22 GHz Latching SPDT Coaxial Switch COAX SWITCHES Series CCRT-33S/CRT-33S PART NUMBER CCRT-33S CRT-33S DESCRIPTION Commercial Latching SPDT, DC-18GHz, Internal 50Ω Termination Elite Latching SPDT, DC-22GHz, Internal 50Ω Termination The CCRT-33S/CRT-33S

More information

narda today narda today RF & Microwave Product Overview w w w. nardamicrowave. com

narda today narda today RF & Microwave Product Overview w w w. nardamicrowave. com narda today narda today RF & Microwave Product Overview w w w. nardamicrowave. com Table of Contents This booklet presents an overview of Narda s RF & Microwave products. Details and specifications can

More information

100W Power Amplifier 8GHz~11GHz

100W Power Amplifier 8GHz~11GHz 100W Power Amplifier 8GHz~11GHz High output power +50dBm Aerospace and military application X band radar High Peak to average handle capability All specifications can be modified upon request Parameter

More information

Parameter Min. Typ. Max. Units. Frequency Range 8-11 GHz. Saturated Output Power (Psat) 52 dbm. Input Max Power (No Damage) Psat Gain dbm

Parameter Min. Typ. Max. Units. Frequency Range 8-11 GHz. Saturated Output Power (Psat) 52 dbm. Input Max Power (No Damage) Psat Gain dbm 150W Solid State EMC Benchtop Power Amplifier 8GHz~11GHz Electrical Specifications, T A =25 Features Automatic Calibration Built in Temperature Compensation Adjustable Attenuation: 31.5dB Range, 0.5dB

More information

LB680A Pulse Profiling USB PowerSensor+ Data Sheet

LB680A Pulse Profiling USB PowerSensor+ Data Sheet Key PowerSensor+ Specifications 50 MHz to 20 GHz - 40 dbm to +20 dbm 2.8% Total Error* 1.20:1 VSWR (-21 db Return Loss) * Measuring a well matched DUT (-20 dbm @ 2 GHz) Measurement Capability Time Gated

More information

Series CCRS-53S/CRS-53S Miniature DC 26.5 GHz Failsafe 2P3T Coaxial Switch

Series CCRS-53S/CRS-53S Miniature DC 26.5 GHz Failsafe 2P3T Coaxial Switch COAX SWITCHES Series CCRS-53S/CRS-53S PART NUMBER CCRS-53S CRS-53S DESCRIPTION Commercial Failsafe 2P3T, DC-26.5GHz Elite Failsafe 2P3T, DC-26.5GHz The CCRS-53S/CRS-53S is a broadband, 2P3T, electromechanical

More information

Variable Attenuators (Step & Continuous)

Variable Attenuators (Step & Continuous) (Step & Continuous) Wide Choice of Attenuation & Frequency Ranges. High Reliability & Long Life Rugged Construction & Connectors Rotational Stops Included on most models Low Cost Designs - Model 3033 Custom

More information

Series HD 2A, 60Vdc, True Output Status Feedback, Short-Circuit Protected DC Solid-State Relay

Series HD 2A, 60Vdc, True Output Status Feedback, Short-Circuit Protected DC Solid-State Relay Part* Number HD00CFW DESC Drawing Number HD00CFY 88062-008 HD02CFW HD02CFY 88062-006 HD20CFW HD20CFY 88062-004 HD22CFW HD22CFY 88062-002 HD24CFW HD24CFY Relay Description Solid State Relay (SSR) SSR with

More information

Series CCRS-33S/CRS-33S Miniature DC 18 GHz Failsafe 2P3T Coaxial Switch

Series CCRS-33S/CRS-33S Miniature DC 18 GHz Failsafe 2P3T Coaxial Switch COAX SWITCHES Series CCRS-33S/CRS-33S PART NUMBER CCRS-33S CRS-33S DESCRIPTION Commercial Failsafe 2P3T, DC-18GHz Elite Failsafe 2P3T, DC-18GHz The CCRS-33S/CRS-33S is a broadband, 2P3T, electromechanical

More information

Dual Channel, High Speed Optocouplers Technical Data

Dual Channel, High Speed Optocouplers Technical Data Dual Channel, High Speed Optocouplers Technical Data HCPL-2530 HCPL-2531 HCPL-4534 HCPL-0530 HCPL-0531 HCPL-0534 Features 15 kv/µs Minimum Common Mode Transient Immunity at V CM = 1500 V (HCPL-4534/0534)

More information

dbm Supply Current (Idd) (Vdd=+36V)

dbm Supply Current (Idd) (Vdd=+36V) Ka Band 6W Power Amplifier 28GHz~42GHz High output power Aerospace and military application High Peak to average handle capability High Linearity and low noise figure All specifications can be modified

More information

MSW2T /MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch

MSW2T /MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch PRELIMINARY MSW2T-2030-192/MSW2T-2031-192/MSW2T-2032-192 SP2T Surface Mount High Power PIN Diode Switch Features: Wide Operating Frequency Band: 50 MHz to 6 GHz Surface Mount SP2T Switch 5mm x 8mm x 2.5mm

More information

HMC241AQS16 / 241AQS16E

HMC241AQS16 / 241AQS16E v00.1213 Typical Applications Features The HMC241AQS16 & HMC241AQS16E are ideal for: Base Stations & Portable Wireless CATV / DBS Wireless Local Loop Test Equipment Functional Diagram RoHS Compliant Product

More information

Features. Parameter Frequency Min. Typ. Max. Units. Return Loss Off State DC - 20 GHz 13 db

Features. Parameter Frequency Min. Typ. Max. Units. Return Loss Off State DC - 20 GHz 13 db Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Hybrids Test Instrumentation SATCOM & Sensors Functional Diagram Features Broadband Performance: DC

More information

Keysight Technologies 87104/6D Multiport Electromechanical Coaxial Switches

Keysight Technologies 87104/6D Multiport Electromechanical Coaxial Switches Keysight Technologies 87104/6D Multiport Electromechanical Coaxial Switches DC to 40 GHz Technical Overview Introduction Modern automated test systems demand higher accuracy and performance than ever before.

More information

Switch 50W SPDT Pin Diode, Reflective TTL Driver 10 to 3000 MHz

Switch 50W SPDT Pin Diode, Reflective TTL Driver 10 to 3000 MHz Coaxial Switch 50W SPDT Pin Diode, Reflective TTL Driver 10 to 3000 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C Power L(+20 dbm), M(+28 dbm), U(+30 dbm)

More information

LB679A CW and Pulse (Modulation) USB PowerSensor+ Data Sheet

LB679A CW and Pulse (Modulation) USB PowerSensor+ Data Sheet Key PowerSensor+ Specifications 50 MHz to 20 GHz - 40 dbm to +20 dbm 2.8% Total Error* 1.20:1 VSWR (-21 db Return Loss) * Measuring a well matched DUT (-20 dbm @ 2 GHz) Key PowerSensor+ Capability Test

More information

9W Power Amplifier 26.2GHz~34GHz

9W Power Amplifier 26.2GHz~34GHz 9W Power Amplifier 26.2GHz~34GHz High output power > +39.5 dbm Aerospace and military application High Peak to average handle capability High Linearity and low noise figure All specifications can be modified

More information

Surface Mount Limiter, GHz

Surface Mount Limiter, GHz Surface Mount Limiter, 2.9 3.3 GHz LM2933-Q-B-301 Datasheet Features Surface Mount Limiter in Compact Package: 8 mm L x 5 mm W x 2.5 mm H Incorporates PIN Limiter Diodes, DC Blocks, Schottky Diode & DC

More information

MA4P7470F-1072T. Non Magnetic MELF PIN Diode. Features. Description and Applications. Designed for Automated Assembly

MA4P7470F-1072T. Non Magnetic MELF PIN Diode. Features. Description and Applications. Designed for Automated Assembly Features Non-Magnetic Package Suitable for MRI Applications Rectangular MELF SMQ Ceramic Package Hermetically Sealed Low Rs for Low Insertion Loss Long τ L for Low Intermodulation Distortion Low Cj for

More information

Features. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db. DC GHz

Features. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db. DC GHz v1.11 HMC55 / 55E Typical Applications The HMC55 / HMC55E is ideal for: RFID & Electronic Toll Collection (etc) Tags, Handsets & Portables ISM, WLAN, WiMAX & WiBro Automotive Telematics Test Equipment

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Electrical Specifications, T A =25 Ultra Wide Band Low Noise Amplifier AC 110V/220V 0.01-20GHz Parameters Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.01 10 10 20 GHz Gain 28 30 26 28 db Gain

More information

MSW2T /MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch

MSW2T /MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch PRELIMINARY MSW2T-2060-195/MSW2T-2061-195/MSW2T-2062-195 SP2T Surface Mount High Power PIN Diode Switch Features: Surface Mount SP2T Switch 5mm x 8mm x 2.5mm Industry Leading Average Power Handling 100W

More information

MSW2T /MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch

MSW2T /MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch RELEASED MSW2T-2060-195/MSW2T-2061-195/MSW2T-2062-195 SP2T Surface Mount High Power PIN Diode Switch Features: Surface Mount SP2T Switch: 5mm x 8mm x 2.5mm Industry Leading Average Power Handling: 100W

More information

Inside Front Cover Model Number Index 2 Product Index 4

Inside Front Cover Model Number Index 2 Product Index 4 Contents DESCRIPTION PAGE NO. About General Microwave Inside Front Cover Model Number Index 2 Product Index 4 Integrated Microwave Assemblies 5 Attenuators/Modulators Octave-band, broadband, or ultra-broadband

More information

FMMX9003 DATA SHEET. Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm.

FMMX9003 DATA SHEET. Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm. FMMX93 Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm FMMX93 is an I/Q double balanced millimeter-wave mixer module that operates across

More information

HILNA V1 Low Noise Amplifier

HILNA V1 Low Noise Amplifier HILNA V1 Low Noise Amplifier 50-1000 MHz db Gain P/N: HILNA-V1 (includes NW-LN-ACC-CB02CA interface cable) NuWaves HILNA V1 is the first in its class of broadband low noise amplifiers designed to achieve

More information

SP4T RF Switch 50 Ω Absorptive RF switch 1 to 6000 MHz Internal driver, Single Supply Voltage 2.3V to 3.6V

SP4T RF Switch 50 Ω Absorptive RF switch 1 to 6000 MHz Internal driver, Single Supply Voltage 2.3V to 3.6V Solid state SP4T RF Switch 50 Ω Absorptive RF switch 1 to 00 MHz Internal driver, Single Supply Voltage 2.3V to 3.6V The Big Deal High isolation, 57 db up to 2.7 GHz High linearity, IP3 +58 dbm at 1900

More information

Series CCP-32N Low PIM DC 3 GHz Latching SPDT Coaxial Switch

Series CCP-32N Low PIM DC 3 GHz Latching SPDT Coaxial Switch COAX SWITCHES Series CCP-32N PART NUMBER CCP-32N DESCRIPTION Commercial Latching SPDT, DC-3GHz, Low PIM These switches are designed to have extremely low passive intermodulation for use in narrow bandwidth

More information

Series CCRS-53S/CRS-53S Miniature DC 26.5 GHz Latching 2P3T Coaxial Switch

Series CCRS-53S/CRS-53S Miniature DC 26.5 GHz Latching 2P3T Coaxial Switch COAX SWITCHES Series CCRS-53S/CRS-53S PART NUMBER CCRS-53S CRS-53S DESCRIPTION Commercial Latching 2P3T, DC-26.5GHz Elite Latching 2P3T, DC-26.5GHz The CCRS-53S/CRS-53S is a broadband, 2P3T, electromechanical

More information

High Power PIN Diodes

High Power PIN Diodes High Power PIN Diodes Features High Power Handling Low Loss, Low Distortion Voltage Ratings to 1000 Volts Passivated PIN Chip Full Face Bonded Hermetically Sealed Low Inductance Axial Lead, and SMQ Surface

More information

DC to 400 MHz (40 db Typ. Isolation up to 20 GHz)

DC to 400 MHz (40 db Typ. Isolation up to 20 GHz) Coaxial Low Pass Filter 5Ω DC to 4 MHz (4 db Typ. Isolation up to 2 GHz) The Big Deal Very good rejection, 4 db typ. up to 2 GHz Excellent power handling, 1W Rugged unibody construction CASE STYLE: FF1118

More information