High Power Amplifier, Solid State, Broadband MHz, 51dB Gain, SMA Female Connectors, 1dB GCP. RAMP M-51d-Sf-80W-e7
|
|
- Kristian Warner
- 6 years ago
- Views:
Transcription
1 ELECTRICAL +28 VDC, 25 C, 50 Ω System Parameter Symbol Min Typ Max Units Operating Frequency BW MHz Power Output CW P SAT Watt Power 1 db Gain Compression Point P 1dB 80 Watt Power 1 db Gain Compression Point G 1dB 51 db Input Power for Rated Pout P IN 0 dbm Small Signal Gain Flatness ΔG ±1.5 db Input Return Loss S11-10 db Noise Figure NF 7 10 db Third Order Intermodulation 42dBm/tone, Δ = 100 KHz 100W output IMD IP3 2 nd 3 rd Spurious Signals Spur < dbc Operating Voltage VDD Volt Quiescent Current I DQ 4 Amp Current rated POUT I DD Amp ENVIRONMENTAL CHARACTERISTICS Parameter Symbol Min Typ Max Units Operating Case Temperature Tc C Storage Temperature Tstg C Relative humidity (non-condensing) RH 95 % Altitude ALT 10,000 30,000 Feet Shock / Vibration SH / VI MIL-STD810F MECHANICAL SPECIFICATIONS Parameter Value Units Dimensions (excluding heatsink) 6.4 x 6.7 x 1.3 Inch (max) Weight without HS 4.0 lb. (max) RF Connectors In/Out SMA Female DC / Interface Connector 7W2 Hybrid D-sub Cooling Requires External Heatsink dbc dbm dbc dbc 1 of 6
2 2 of 6
3 Options: 1 RF Power display 2 Ethernet Output 3 of 6
4 ACCEPTANCE TEST DATA ELECTRICAL 120V AC, 25 C, 50 System Parameter Specifications Test results (MHz) Symbol Min Typ Max Units Notes P/F Operating Frequency Plot 3dB BW BW MHz Plot 1,2 x x x P Output Power 3dB G.C.P. P SAT 120 Watt Plot 2 Note 2, 3 x x x P Output 1dB G.C.P. P 1dB 80 Watt Plot 1 Note 2, 3 x x x P Power 1dB G.C.P. G 1dB 50 db Plot 1 x x x P Input Power for rated P OUT P IN 0 dbm Record P Small Signal Gain Flatness (P IN = -20dBm) G 2.0 db Plot 1, 2 x x x P Gain Adjustment Range FGA 25 db Plot 3 x x x P Shutdown Condition, P IN = 0dBm G MUTE - db Record P ALC 10W & 50W (Optional) ALC 1.0 db Plot 4 x x x P Sample 47dBm (ALC, Optional) G SP - db N/A x x x - Input Return Loss S11-10 db Plot 1-4 x x x P Inter-modulation (Third Order Intercept IMD -34 dbc Record Point) 2-tone 40dBm/Tone, Δ = 100KHz IP3 +57 dbm Calculate rated P 1dB 2 nd dbc Record 3 rd Spurious Signals Spur -60 dbc Record <-70 <-70 <-70 P Switching Time, 1KHz TTL, P IN = 0dBm T ON 50 x 3.5 x Sec Record T OFF 50 x 0.9 x Operating Voltage 120V AC V AC Volt Verify x x P AC Standby I DQ 4.0 Amp Record x 3.7 x P AC Current Consumption, 120V AC I AC 15.0 Amp Record P P OUT = 120Watts P D 1800 Watt Calculate P Input Overdrive - Test for 5Sec. P OD +10 dbm Record P OUT P Load VSWR Test for rated P 1dB Open 6.0 Amp Load VSWR - Test for rated P 1dB Short 6.0 Amp Record I AC Note 1 Record I AC Note 1 P P P P P Thermal Overload T OD 85 C Record x 73 X P 4 of 6
5 INTERFACE LCD Controller Settings Firmware NTE Max ALC VVA Fwd./Rev. Watt/dB GPIB RS-422 Monitors (Opt 062) Version dbm dbm Min Max Verify / Record N/A N/A N/A I/O Connector D-Sub Connector, 9-Pin Notes: I/O Connector 1 - Fwd 2 - Rev P 1dB 3 - V DC (TP) 5 V DC 0.2 V DC 4 VVA (TP) 5.6V DC Ex SD TTL High 6 - V DC (TP) 12 V DC 0.5V DC 7 - V DC (TP) 13V DC 1V DC 8 & 9 - GND N/A N/A N/A N/A N/A N/A N/A N/A 1. Verify No change in performance after test. 2. Source correction included in P IN measurement: 1000MHz. 3. Output Directional Coupler will reduce Power Capability by dB. 5 of 6
6 Plots 1 - Small Signal and P 1dB Gain Top Curve: Small Signal P IN = -20dBm Middle Curve: Power P 1dB, P IN = -1.8dBm (Note 2, 3) Reference: 50.8dB, 1dB/div. Performance Plots Plot 2 - Small Signal and P SAT Top Curve: Small Signal P IN = -20dBm Middle Curve: P P IN = 2.0dBm (Note 2, 3) Reference: 50.8dB, 1dB/div. Plot 3 - Gain Adjustment Range Top Curve: Maximum P IN = -20dBm Middle Curve: Minimum Gain Reference: 30dB, 10dB/div. Plot 4 - ALC 10W & 50W Top Curve: 50W, P IN = 0dBm Middle Curve: 10W, P IN = 0dBm Reference: 46dB, 1dB/div. 6 of 6
Solid State Broadband High Power Amplifier
The BBS4A5AVT (2157) is suitable L & S Bands broadband or band specific high power applications. This amplifier utilizes high power GaN devices that provide wide frequency response, high gain, high peak
More informationSolid State General Communication Power Amplifier
The GCS1D2GUT (SKU 4062) is suitable for broadband high power linear applications in the HF frequency range. This rack mount amplifier utilizes pushpull MOSFET power devices that provide high gain, wide
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
50W Broadband High Power Amplifier Module 500 2500MHz Electrical Specifications, T A = +25⁰C, Vdd = +28V Features Ultra-broadband Amplifier Module Small and lightweight Supply Voltage: +28V Parameter Min.
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
80W Broadband High Power Amplifier Module 20-1000MHz Electrical Specifications, T A = +25⁰C, VDD = +28V Features Broadband High Power High Efficiency Great Linearity Small Size & Light Weight Low Distortion
More informationC20R01 C-Band Solid State Power Amplifier
C20R01 C-Band Solid State Power Amplifier 20 Watts CW, 4.4 GHz - 4.9 GHz 2 Watts Linear, 4% EVM @ 33 dbm P/N: NW-PA-C-20-R01 (Includes NW-PA-ACC-CB09MC interface cable) The NuPower C20R01 is a small, highly
More information12D05A L- & S-Band Solid State Power Amplifier
12D05A L- & S-Band Solid State Power Amplifier 35 Watts CW @ 1.7 GHz to 2.1 GHz 20 Watts CW @ 2.1 GHz to 2.4 GHz P/N: NW-PA-12D05A (Includes NW-PA-ACC-CB09MC interface cable) The NuPower 12D05A is a small,
More information12B01A L- & S-Band Solid State Power Amplifier
12B1A L- & S-Band Solid State Power Amplifier 1 Watt CW 2.5 Watts Linear, 5% EVM @ 34 dbm 1. GHz - 2.5 GHz P/N: NW-PA-12B1A (includes NW-PA-ACC-CB9MA interface cable) The NuPower 12B1A is a small, highly
More information12B01A-D30 L- & S-Band Solid State Power Amplifier w/ 1 Watt Input Drive Level
12B01A-D30 L- & S-Band Solid State Power Amplifier w/ 1 Watt Input Drive Level 10 Watts (CW) 1.0-2.5 GHz P/N: NW-PA-12B01A-D30 (Replaces P/N: NW-SSPA-10W-1.0-2.5-D30) The NuPower 12B01A-D30 is a small,
More information12B01A-09 S-Band Solid State Power Amplifier
12B1A-9 S-Band Solid State Power Amplifier Watt CW 2.5 Watts Linear, 5% EVM @ 34 dbm 2. GHz - 2.5 GHz P/N: NW-PA-12B1A-9 The NuPower 12B1A-9 is a small, highly efficient solid state power amplifier that
More informationNuPower TM. 11B02A Mini Multi-Octave Power Amplifier. Features. Applications. Benefits. 10 Watt CW 200 MHz MHz P/N: NW-PA-11B02A
11B02A Mini Multi-Octave Power Amplifier 10 Watt CW - 2600 MHz P/N: NW-PA-11B02A (includes NW-PA-ACC-CB09ME interface cable) The NuWaves NuPower TM 11B02A is a highly efficient, miniature solid state power
More information12B04A L- & S-Band Bidirectional Amplifier
NuPower Xtender TM 12B4A L- & S-Band Bidirectional Amplifier Watt CW 2. Watts Linear, % EVM @ 34 dbm 1. GHz - 2. GHz P/N: NW-BA-12B4A (includes NW-BA-ACC-CB9MA) The NuPower Xtender TM 12B4A is a small,
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
100W Coaxial Microwave Power Amplifier 20MHz~520MHz Features Small signal open loop gain: 50dB Output power 100W typical Electrical Specifications, T A = +25 C Typical Applications Suitable for RFI, EMC
More informationFMAM5032 DATA SHEET. 48 db Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 dbm IP3 and SMA.
48 Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 m IP3 and SMA FMAM5032 is a high gain Class A/AB GaN Linear Power Amplifier operating in the 500 to 3000 MHz
More informationHILNA V1 Low Noise Amplifier
HILNA V1 Low Noise Amplifier 50-1000 MHz db Gain P/N: HILNA-V1 (includes NW-LN-ACC-CB02CA interface cable) NuWaves HILNA V1 is the first in its class of broadband low noise amplifiers designed to achieve
More informationAPTHPA xx50
Absolute Maximum Ratings PARAMETER UNIT RATING Input RF Power dbm 0 Supply Voltage V 35 Load Mismatch Value - 3 : 1 @all load phase * Input Signal Condition : CW 1-Tone Environmental Characteristics PARAMETER
More informationHILNA GPS Low Noise Amplifier
HILNA GPS Low Noise Amplifier 1200-1600 MHz 32 db Gain P/N: HILNA-GPS (includes NW-LN-ACC-CB02CA interface cable) NuWaves HILNA GPS is a broadband low noise amplifier designed to achieve high gain while
More informationHILNA LS Low Noise Amplifier
HILNA LS Low Noise Amplifier 1000-3000 MHz 50 db Gain P/N: HILNA-LS (includes NW-LN-ACC-CB4MUA interface cable) NuWaves HILNA LS is a broadband low noise amplifier covering L- & S-bands, and designed to
More informationPAGE 1/12 ISSUE SERIES DP3T/SPDT PART NUMBER R595 XXX XXX
PAGE 1/12 ISSUE 22-06-2018 SERIES DP3T/SPDT PART NUMBER R595 XXX XXX DP3T-SPDT Coaxial Switches DC to 6 GHz, DC to 20 GHz, DC to 26.5 GHz, DC to 40 GHz Radiall s PLATINUM SERIES switches are optimised
More information2 GHz to 6 GHz, 500 W Power Amplifier HMC8113
Data Sheet FEATURES 2 GHz to 6 GHz frequency range 85 db typical small signal gain 57 dbm typical saturated output power 61 db gain control range with 1 db LSB Standard 5U 19-inch rack chassis (per EIA-310D)
More informationData Sheet SC5317 & SC5318A. 6 GHz to 26.5 GHz RF Downconverter SignalCore, Inc. All Rights Reserved
Data Sheet SC5317 & SC5318A 6 GHz to 26.5 GHz RF Downconverter www.signalcore.com 2018 SignalCore, Inc. All Rights Reserved Definition of Terms 1 Table of Contents 1. Definition of Terms... 2 2. Description...
More informationZHL-4W-422+ Mini-Circuits P.O. Box , Brooklyn, NY (718)
Coaxial High Power Amplifier Ω 4W 0 to 4200 MHz Features High power, 4Watt Excellent IP3, +44 dbm typ. Excellent IP2, +45 dbm typ. High efficiency, % typ. at saturation Class A amplifier No damage with
More informationAmplifier HF MHz
Amplifier HF 1.5-30MHz multiple Amps Features Full color touchscreen display Linear solid state design Ultra efficient switching power supply Built in monitoring and control (remote port, Ethernet, SNMP)
More informationKU-BAND OUTDOOR BLOCK CONVERTERS
Features/Options Low Phase Noise Exceeds IESS 308/309 25 db L-Band Gain Control with 0.1 db Step Auto Switch Over to an Internal High Stability REF Internal REF Tune to Match with External
More informationSC5307A/SC5308A 100 khz to 6 GHz RF Downconverter. Datasheet SignalCore, Inc.
SC5307A/SC5308A 100 khz to 6 GHz RF Downconverter Datasheet 2017 SignalCore, Inc. support@signalcore.com P RODUCT S PECIFICATIONS Definition of Terms The following terms are used throughout this datasheet
More informationBroadcast Concepts Inc NW 102 Road Suite 4 Medley FL Tel: : Fax Model P50FM42MH-SMA2 FM Pallet Amplifier Module
Model P50FM42MH-SMA2 FM Pallet Amplifier Module This amplifier module is ideal for driver stages in FM Broadcast transmitters. 86 110MHz 28Volts Pout: 50W CW minimum 40dB Gain Class AB MACOM MRF173 Mosfet
More informationINTRODUCTION STANDARD FEATURES. Option: High ambient temperature operation (up to 60 C) APPLICATION KU-BAND BOOSTER AMPLIFIER
KU-BAND BOOSTER AMPLIFIER Output Power 16 W to 50 W AWSB-K16; AWSB-K20; AWSB-K25; AWSB-K32; AWSB-K40; AWSB-K50 INTRODUCTION The AWSB-K series described in this section are Advantech s line of medium gain
More informationWatts W/ C Storage Temperature Range Tstg 65 to +200 C Operating Junction Temperature TJ 200 C. Test Conditions
SEMICONDUCTOR TECHNICAL DATA The RF Sub Micron MOSFET Line N Channel Enhancement Mode Lateral MOSFETs Designed for broadband commercial and industrial applications at frequencies in the 865 895 MHz band.
More informationSC5407A/SC5408A 100 khz to 6 GHz RF Upconverter. Datasheet. Rev SignalCore, Inc.
SC5407A/SC5408A 100 khz to 6 GHz RF Upconverter Datasheet Rev 1.2 2017 SignalCore, Inc. support@signalcore.com P R O D U C T S P E C I F I C A T I O N S Definition of Terms The following terms are used
More information2.9GHz SPECTRUM ANALYZER
2.9GHz SPECTRUM ANALYZER Introducing a new 2.9GHz Spectrum Analyzer Manufacturing Research and Development Field Service Education Powerful capacity by advanced digital synthesizer Revolutionary features
More informationFrequency Range MHz. Gain db. Gain Flatness ±0.9 ±1.4 db. Output Power at 1dB compression dbm
Coaxial Amplifier Ω Medium High Power 10 to 1000 MHz Features wideband, 10 to 1000 MHz high IP3, +42 dbm typ. medium high power, 28 db min. ZHL-2X+ Applications VHF/UHF cellular instrumentation laboratory
More informationSPA SMA DATA SHEET
43 db Gain Medium Power High Gain Amplifier at 3 Watt P1dB Operating From 14.4 GHz to 15.4 GHz with 41 dbm IP3 and SMA SPA-154-43-03-SMA is a 3 Watt Ku Band high gain power coaxial amplifier operating
More informationTITANIUM SERIES R 51 PART NUMBER SELECTION. High Performance Multiport Switches. Our Most Important Connection is with You.
PART NUMBER SELECTION Models: 2: Without 50 Ω terminations 4: With 50 Ω terminations RF Connectors: 3: SMA up to 6 GHz 4: SMA up to 20 GHz F: SMA up to 26.5 GHz 8: SMA 2.9 up to 40 GHz (1) Radiall s TITANIUM
More informationThin-Film Cascadable Amplifier 5 to 1000 MHz. Technical Data. UTO/UTC 1005 Series
Thin-Film Cascadable Amplifier 5 to 1000 MHz Technical Data UTO/UTC 1005 Series Features Frequency Range: 5 to 1000 MHz High Dynamic Range High Output Power: +21.0 m (Typ) Noise Figure: 5.0 (Typ) Temperature
More informationDC-20 GHz Distributed Driver Amplifier. Parameter Min Typ Max Min Typ Max Units
7-3 RF-LAMBDA DC-20 GHz Distributed Driver Amplifier Electrical Specifications, T A =25 Features Ultra wideband performance Positive gain slope High output power Low noise figure Microwave radio and VSAT
More information100W Power Amplifier 8GHz~11GHz
100W Power Amplifier 8GHz~11GHz High output power +50dBm Aerospace and military application X band radar High Peak to average handle capability All specifications can be modified upon request Parameter
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Reflective Coaxial SP2T Switch 50 700MHz Electrical Specifications, TA = +25 C, Vdd = +5V/-28V, TTL = 0 / +5V Description Features Wide Band Operation 50-700MHz TTL compatible driver included Fast Switching
More informationAVP TO 2600 MHz, 15 WATTS HIGH POWER GaNPak B AMPLIFIER AVP2524 SPECIFICATIONS * INTERMODULATION PERFORMANCE ABSOLUTE MAXIMUM RATINGS AVP2524
Rev. 5/1 6 TO 26 MHz, 15 WATTS HIGH POWER GaNPak B AMPLIFIER Typical Values Broadband....................................... High Gain....................................... High Saturated Power, Psat.........................
More information4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz
4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 40 db Typical Psat: +37 dbm Typical Noise Figure: 3dB Typical Supply Voltage: +24V (-NP) / +36V (-WP)
More informationNo. 1. BROADBAND RF-POWER-AMPLIFIERS 10 khz - 6 GHz. For immunity tests according to IEC, EN, ISO, SAE, MIL
No. 1 BROADBAND RF-POWER-AMPLIFIERS 10 khz - 6 GHz For immunity tests according to IEC, EN, ISO, SAE, MIL Power amplifiers with high linearity and high amplification in a wide frequency range with thermal
More informationSC5306B 1 MHz to 3.9 GHz RF Downconverter Core Module. Datasheet SignalCore, Inc.
SC5306B 1 MHz to 3.9 GHz RF Downconverter Core Module Datasheet 2015 SignalCore, Inc. support@signalcore.com SC5306B S PECIFICATIONS Definition of Terms The following terms are used throughout this datasheet
More informationSpecification for Radiated susceptibility Test
1 of 11 General Information on Radiated susceptibility test Supported frequency Range : 20MHz to 6GHz Supported Field strength : 30V/m at 3 meter distance 100V/m at 1 meter distance 2 of 11 Signal generator
More information1208 P10-VHF-H-20. Frequency Range: MHz. Efficiency: 10% Temperature Range: 0 to 70 C Max VSWR: 5:1. Class: Supply Voltage: 28.
Part Number Revision 2.C Release Date July 24, 2007 Revision Notes Included Mechanical Drawings Amplifier Name Technical Specifications Summary Frequency Range: 170-230 MHz P1dB: 10 Watts CW Class: A Supply
More informationFeatures 100A400AM20. 4kHz 400MHz Class A Portable Full VSWR tolerant CE & RoHS compliant High Efficiency
Specifications Class A Portable Full VSWR tolerant CE & RoHS compliant High Efficiency Features The Model is a solid-state, self -contained, air-cooled, broadband amplifier designed for applications requiring
More informationPreliminary Short Specification for RCA0727H50D1
Preliminary Short Specification for RCA077H0D RESTRICTION ON USE, DUPLICATION, OR DISCLOSURE OF PROPRIETARY INFORMATION This document contains proprietary information, which is the sole property of RFcore
More informationMT3200A TRAVELING WAVE TUBE MEDIUM POWER AMPLIFIER
ISO 9001 MODEL MT3200A TRAVELING WAVE TUBE MEDIUM POWER AMPLIFIER MT3200A TRAVELING WAVE TUBE MEDIUM POWER AMPLIFIER FOR SATELLITE FOR SATELLITE UPLINK UPLINK APPLICATIONS C-BAND: 400W X-BAND: 400W Ku-BAND:
More informationBlock Upconverters for Integration in High Power Amplifiers
R Back to Block/Fixed Tuned Converters Block Upconverters for Integration in High Power Amplifiers Block Upconverters For Integration In High Power Amplifiers C-, X- and Ku-Band Models (except UPBA-13)
More information***note: pallet may draw up to 5.0 amps on a 32V supply.
Model BCI-UHF-40TX12 TV Pallet Amplifier Module This amplifier module is ideal for final output stages in analog and digital TV broadcast equipment. 470 860MHz 28-32 Volts Pout: 25W Peak Sync. 10Watts
More information20W Solid State Power Amplifier 26.2GHz~34GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz.
20W Solid State Power Amplifier 26.2GHz~34GHz Features Wideband Solid State Power Amplifier Gain: 65dB Typical Psat: +43dBm Typical Supply : +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V Typical
More information5191 SCA3000-FM-A Watts CW. Efficiency: 68% Temperature Range: 0 to 55 C Max VSWR: 3:1. Class:
Part Number Revision 0.a Release Date January, 2008 Revision Notes Production release Amplifier Name Technical Specifications Summary Frequency Range: P1dB: Class: Supply Voltage: 87.5-108 MHz 3000 Watts
More informationMain Features: ERZ-LNA Typical applications: Performance
Main Features: Frequency Range: 2 to 45 GHz. Typical values: Gain 15 db, NF 5 db RF connectors (I/O): 2.4 mm Solder filtered pins for DC connection Several mounting options Gold platted compact aluminum
More informationRF POWER AMPLIFIER. For Accelerator Bunch-Beam-FeedBack R&K-GA005M R-SL
All Solid-State Amplifier Broadband Frequency:5MHz~MHz Power :2W APPLICATION EMC(Electromagnetic Compatibility) Accelerator Application Telecommunication Test and Measurement Application Etc... OUTLINE
More information5199 SCA5000-FM-A0. Efficiency: 58% Temperature Range: 0 to 55 C Max VSWR: 3: Watts CW. Class:
Part Number Revision 0.a Release Date January, 2008 Revision Notes Production release Amplifier Name Technical Specifications Summary Frequency Range: POUT: Class: Supply Voltage: 87.5-108 MHz 5500 Watts
More informationSDA SMA DATA SHEET
0 to 60 db 10 Bit Programmable TTL Controlled Step Attenuator With a 006 db Step SMA Female To SMA Female From 500 MHz To 18 GHz The is a Non-Reflective 10 Bit Programmable 60 db Pin Diode Attenuator with
More information4206 PA25-UHF-40. Frequency Range: MHz. Efficiency: 10% Temperature Range: -18 to 65 C Max VSWR: 10:1. Class: Supply Voltage: 32.
Part Number Revision 0.b Release Date July 24, 2007 This document applies to 4206 and 3692 and 5208 Revision Notes Updated Mechanical Specifications Amplifier Name Technical Specifications Summary Frequency
More information8W Wide Band Power Amplifier 1GHz~22GHz
8W Wide Band Power Amplifier 1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 50 db Typical Psat: +39 dbm Supply Voltage: +36V Electrical Specifications, T A = +25⁰C Typical Applications
More information5143 SCA1000-FM-A Watts CW. Efficiency: 68% Temperature Range: 0 to 55 C Max VSWR: 3:1. Class:
Part Number Revision 0.a Release Date January, 2008 Revision Notes Initial release Amplifier Name Technical Specifications Summary Frequency Range: Pout: Class: Supply Voltage: 87.5-108 MHz 1000 Watts
More informationModel 865-M Wideband Synthesizer
Model 865-M Wideband Synthesizer Features Wideband Low phase noise Fast switching down to 15 µs FM, Chirps, Pulse Internal OCXO, external variable reference Single DC supply Applications ATE LO for frequency
More informationDS H01 DIGITAL SYNTHESIZER MODULE SYSTEM SOLUTIONS. Features Applications 174 x 131 x 54 mm. Technical Description
DS H01 The DS H01 is a high performance dual digital synthesizer with wide output bandwidth specially designed for Defense applications where generation of wideband ultra-low noise signals along with very
More informationFEATURES: Reduced Depth. Output RF Power Hold. Easily Accessible Diagnostic Port. Programmable Alarms. Event And Maintenance Logs. Ethernet Interface
MT3200A TRAVELING WAVE TUBE MEDIUM POWER AMPLIFIER FOR SATELLITE UPLINK APPLICATIONS C-BAND: 400W X-BAND: 400W Ku-BAND: 400W DBS-BAND: 270W DUAL C-/Ku-BAND: 325W DUAL Ku-/DBS-BAND: 350W AVAILABLE SYSTEM
More informationFeatures. The HMC-C072 is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT. = +25 C, Vdc = +7V
amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -67 dbc/hz @ khz Noise Figure: 4.5 db Gain:
More informationModel 845-M Low Noise Synthesizer
Model 845-M Low Noise Synthesizer Features Low phase noise Fast switching down to 20 µs FM, Chirps, Pulse Internal OCXO, external variable reference Single DC supply Applications ATE LO for frequency converters
More informationRF-LAMBDA. ABSORPTIVE 2-4 GHz 6 Bits 64dB PIN DIODE ATTENUATOR. Absorptive Pin Diode Attenuator 6 Bits 64dB 2-4GHz RFDAT0204G6A.
7 65 6 55 5 5 35 3 25 2 5 5 Frequenc y (GHz) 2- Attenuation Value Insert. Loss 3.dB typ. 3.5dB max. ABSORPTIVE 2- GHz 6 Bits 6dB PIN DIODE ATTENUATOR VSWR Control bits Features Wide Band Operation 2.-.GHz
More informationSIR-4011 MICROWAVE WIDEBAND DSP RECEIVER. WIDE FREQUENCY RANGE: GHz
SIR-4011 MICROWAVE WIDEBAND DSP RECEIVER WIDE FREQUENCY RANGE: 0.5 18.0 GHz FEATURES Advanced Front Panel Graphics Display High Dynamic Range: In band Input IP3 > 0 dbm, NF< 15 db DSP Based AM, FM Video
More informationElectrical Data Voltage Supply. 56dB nom. ±2dB (fine ADJ available) Power Out compression) Min. 600W (Typ. 700W) Input Return Loss
AU100-D is a full LD-MOS Broadcast Power Amplifier designed for both digital and analog applications. The unit is the state of the art in terms of easy assembly, reliability and performances. The complete
More information100U1000. Features. 100 watts CW 100kHz 1000MHz Class A Portable Full VSWR tolerant CE & RoHS Compliant High Efficiency
Specifications 100U1000 Class A Portable Full VSWR tolerant CE & RoHS Compliant High Efficiency Features The Model 100U1000 is a solid-state, selfcontained, air-cooled, broadband amplifier designed for
More informationUltra Wide Band Low Noise Amplifier GHz. Electrical Specifications, TA = +25⁰C, With Vg= -5V, Vcc = +4V ~ +7V, 50 Ohm System
Ultra Wide Band Low Noise Amplifier 0.5 46GHz Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.5 20 20 46 GHz Gain 13 13 db Gain Variation Over Temperature (-45 ~ +85) ±3 ±2 db Noise Figure
More informationPart Numbering System
Reactel Filters can satisfy a variety of filter requirements. These versatile units cover the broad frequency range of 2 khz to 5 GHz, and are available in either tubular or rectangular packages, connectorized
More informationSpecification RIGOL. 6 Specification
Specification RIGOL 6 Specification This chapter lists the specifications and general specifications of the analyzer. All the specifications are guaranteed when the following conditions are met unless
More informationEfficiency: 68% Temperature Range: +0 to 60 C Max VSWR: 5:1. Class: Supply Voltage:
Part Number Revision 2.C Release Date July 11 2007 Revision Notes - updated new format Amplifier Name Technical Specifications Summary Frequency Range: P1dB: Class: Supply Voltage: 88-108 MHz 750 Watts
More informationSP4T RF Switch 50 Ω Absorptive RF switch 1 to 6000 MHz Internal driver, Single Supply Voltage 2.3V to 3.6V
Solid state SP4T RF Switch 50 Ω Absorptive RF switch 1 to 00 MHz Internal driver, Single Supply Voltage 2.3V to 3.6V The Big Deal High isolation, 57 db up to 2.7 GHz High linearity, IP3 +58 dbm at 1900
More informationParameter Min. Typ. Max. Min. Typ. Max. Units
25W Wide Band Power Amplifier 20-6000MHz Features Wideband Solid State Power Amplifier Psat: +45dBm Typical Gain: 50dB Typical Supply Voltage: +60V DC Electrical Specifications, T A =25 Parameter Min.
More informationCUSTOM INTEGRATED ASSEMBLIES
17 CUSTOM INTEGRATED ASSEMBLIES CUSTOM INTEGRATED ASSEMBLIES Cougar offers full first-level integration capabilities, providing not just performance components but also full subsystem solutions to help
More informationFrequency Range: MHz. Efficiency: 10% Temperature Range: 0 to 60 C Max VSWR: 5:1. Class: Supply Voltage: 28.0V
Part Number Revision 1.c Release Date July 24, 2007 Revision Notes Amplifier Name Technical Specifications Summary Frequency Range: 50-88 MHz P1dB: 60 Watts CW Class: A Supply Voltage: 28.0V Gain: 36dB
More informationAgilent ESA-L Series Spectrum Analyzers
Agilent ESA-L Series Spectrum Analyzers Data Sheet Available frequency ranges E4403B E4408B 9 khz to 1.5 GHz 9 khz to 3.0 GHz 9 khz to 26.5 GHz As the lowest cost ESA option, these basic analyzers are
More information20W Solid State Power Amplifier 6-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 20W Solid State Power Amplifier 6-18GHz Electrical Specifications, TA = +25⁰C Vcc = +36V Features Psat: + 43.5dBm Gain: 51 db Supply Voltage: +36V 50 Ohm Matched Short Haul / High Capacity
More informationIndoor Rack Mount. GaN Solid State Power Amplifiers 3RU Rack Height
300W S-Band 3RU SSPA Chassis with 1RU N+1 Power Supply Teledyne Paradise Datacom has a rich history in the design and production of Gallium Nitride (GaN) based SSPAs. Our engineers utilize innovative linearization
More informationRFM XR. 2-30MHz 500W Class AB Linear High Performance Amplifier. Maximum Ratings Operation beyond these ratings will void warranty.
Class AB 500W XR-rated linear amplifier 2-30MHz bandwidth 27dB typical gain 64% typical efficiency +/- 1.1dB typical gain flatness Temperature-compensated bias TTL disable The RFP2-30-500XR is an XR-rated
More informationPNRRKIT. Portable Networked Re-Radiating Kit Technical Product Data. Features. Description. Utilizes Existing Roof Antenna
PNRRKIT Portable Networked Re-Radiating Kit Technical Product Data Features Utilizes Existing Roof Antenna Re-Radiating Amplifier with Power Supply Typical Gain 30dB Optional Mounting Kit Hardware Adjustable
More informationFMAM1035 DATA SHEET. 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA. Features: Applications:
FMAM13 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA The FMAM13 is a low phase noise amplifier that operates across the frequency range from 3 GHz
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Wide Band High Power Solid State Power Amplifier 2GHz~6GHz Electrical Specifications, TA = +25⁰C, Vcc = +28V Features Gain: 42 db min Output power +47dBm typical High P1dB: +45dB m Full Band Supply Voltage:
More informationMMA GHz 4W MMIC Power Amplifier Data Sheet
Features: Frequency Range: 27 33 GHz P1dB: +36 dbm IM3 Level: -38 dbc @Po=20dBm/tone Gain: 22 db Vdd = 6V Idsq = 1500 to 2800mA Input and Output Fully Matched to 50 1 2 3 4 5 32 31 30 29 28 27 26 25 24
More information5W Ultra Wide Band Power Amplifier 2-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 5W Ultra Wide Band Power Amplifier 2-18GHz Features Wideband Solid State Power Amplifier Psat: + 37dBm Gain: 35 db Supply Voltage: +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Ultra Wide Band Low Noise Amplifier 0.01GHz~10GHz Electrical Specifications, TA = 25, Vcc = 12V Features Gain: 28dB Typical Noise Figure: 2.5dB Typical High P1dB: 15dBm Typical Supply Voltage: 12V Parameter
More informationADA1200 Linear Amplifier PRELIMINARY DATA SHEET - Rev 1.3
Linear Amplifier FEATURES 12 db Gain 50 to 1000 MHz Frequency Range Noise Figure: 2.3 db Single +5 V Supply Small SOT-89 Package RoHS Compliant/Lead-free APPLICATIONS Low Noise Amplifier for CATV Set-Top
More information2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range
2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz Features Wideband Solid State Power Amplifier Gain: 37dB Typical Psat 35dBm Typical Electrical Specifications, TA = +25⁰C, Vcc = +12V. Parameter Min. Typ.
More informationAdditional heat sink required!
8-850 MHz SUPER LOW NOISE AMPLIFIER WLA08-45A 1 WLA08-45A LNA is a super low noise figure, medium power, and high linearity amplifier with unconditional stable. The amplifier offers the exceptional noise
More informationRFM HSD MHz 350W Class A/AB High Performance Amplifier with High Speed Disable
Class A/AB 350W linear amplifier Fast output disable,
More informationRF Amplifier Data Sheet. BT00100-AlphaA-CW 10kHz-1MHz 100W. Scientific and Industrial Applications
10kHz-1MHz 100W Scientific and Industrial Applications The BT-AlphaA-CW series is a range of class AB RF power amplifiers covering the 10kHz to 1MHz frequency range. Rugged, solid-state design - high reliability
More informationMMA R GHz, 0.1W Gain Block Data Sheet October, 2012
Features: Frequency Range: 17 43 GHz P1dB: 18 dbm Psat: 2 dbm Gain: 21 db Vdd =4.5 V (3 V to 5 V) Ids = 25 ma (15mA to 3mA) Input and Output Fully Matched to 5 Ω 2x and 3x Frequency multiplier applications
More information9W Power Amplifier 26.2GHz~34GHz
9W Power Amplifier 26.2GHz~34GHz High output power > +39.5 dbm Aerospace and military application High Peak to average handle capability High Linearity and low noise figure All specifications can be modified
More informationTELEDYNE MICROWAVE SOLUTIONS. Summary. NF v1. the carrier (10MHz
TELEDYNE MICROWAVE SOLUTIONS NF v1 Summary This is a GaN based Hermetically Sealed SSPA which produces 41dBm minimum Linear Power 1 (42dBm typical) over the entire 29 31GHz bandwidth and operating temperature
More information4454 P500-UHF-17-A. Frequency Range: MHz. Efficiency: 36% Temperature Range: -10 to 55 C Max VSWR: 3:1. Supply Voltage: 32.
Part Number Revision 0.e Release Date December 13, 2007 This document applies to 4454 and 5029 Revision Notes: 0.b Full production release, Apr 07. 0.c Revised Specs May 07. Revised Integration Instructions
More information30W Solid State High Power Amplifier 2-6 GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 30W Solid State High Power Amplifier 2-6 GHz Features Wideband Solid State Power Amplifier Psat: +45dBm Gain: 50dB Supply Voltage: +36V Electrical Specifications, T A = +25⁰C, Vcc = +36V
More information2045 PAB700-FM-A1. Efficiency: 65% Temperature Range: -20 to 70 C Max VSWR: 2.5 :1. Class: Supply Voltage:
Part Number Revision 0.a Release Date August 2010 Revision Notes Initial release / 2032x Amplifier Name Technical Specifications Summary Frequency Range: P1dB: Class: Supply Voltage: 86-108 MHz 700 Watts
More informationRF Amplifier Data Sheet. BT00500-AlphaSA-CW 0.5MHz-150MHz 500W. Scientific and Industrial Applications
0.5MHz-150MHz 500W Scientific and Industrial Applications The BT-AlphaSA-CW series is a range of class AB RF power amplifiers covering the 0.5MHz to 150MHz frequency range. Rugged, solid-state design -
More informationRFM XR. 2-30MHz 500W Class AB Linear Amplifier. Maximum Ratings Operation beyond these ratings will void warranty.
Class AB 500W XR-rated linear amplifier 2-30MHz bandwidth 27dB typical gain 64% typical efficiency +/- 1.0dB typical gain flatness Temperature-compensated bias Optional TTL disable The RFM2-30-500XR is
More informationRF Instrument Amplifier
Coaxial RF Instrument Amplifier Ω 10 to 4200 MHz The Big Deal Wideband, 10 to 4200 MHz High gain, 39 db Excellent gain flatness, ±1.3 db High output power, + dbm Built-in 110/220V AC power supply Built-in
More informationModel 865 RF / Ultra Low Noise Microwave Signal Generator
Model 865 RF / Ultra Low Noise Microwave Signal Generator Features Excellent signal purity: ultra-low phase noise and low spurious Combination of highest output power and fastest switching Powerful touch-display
More informationUniversal/Standard Ku-band 16W BUC MODEL No. NJT8319 series
< Features > * High Temperature Operating Operation Guarantee Temperature Range: * RF Frequency Line-up Universal Ku-band: 13.75 to 14.5 GHz Standard Ku-band: 14.0 to 14.5 GHz * Monitor & Control Line-up
More informationHigh Power Amplifier ZHL-20W-13+ Coaxial. 50Ω 20W 20 to 1000 MHz
Coaxial High Power Amplifier 50Ω 20W 20 to 1000 MHz Features High power, 20 Watt Protected against overheat -shuts off automatically Excellent gain flatness, ±1.2 db typ. Class A amplifier Usable over
More information