Thin-Film Directional Couplers
|
|
- Lesley Shelton
- 5 years ago
- Views:
Transcription
1 DB6N 9 Couplers GENERAL DESCRIPTION RFAP TECHNOLOGY The DB6N 9 Coupler is based on thin-film multilayer technology. The technology provides a miniature part with excellent high frequency performance and rugged construction for reliable automatic assembly. The RFAP LGA 9 Coupler will be offered in a variety of frequency bands compatible with various types of high frequency wireless systems. APPLICATIONS Balanced Amplifiers and Signal Distribution in Wireless Communications FEATURES Miniature 6 size Low I. Loss High Isolation Surface Mountable RoHS Compliant Supplied on T&R Power Rating: W RF Continuous DIMENSIONS: millimeters (inches) LAND GRID ARRAY ADVANTAGES: Inherent Low Profile Self Alignment during Reflow Excellent Solderability Low Parasitics Better Heat Dissipation Bottom View Recommended Pad Layout Dimensions.4 (.6) mm (inches). (.4) L W T A B S.6±. (.6±.4).84±. (.±.4).6±. (.24±.4).25±.5 (.±.2).2±.5 (.8±.2).5±.5 (.2±.2) T W A B L S.75 (.69).5 (.2) ORIENTATION IN TAPE 5 OHM OUT IN OUT 2 ELECTRICAL PARAMETERS Part Number Frequency Port Return Loss Isolation Insertion Loss Ampltidue Phase Balance Power MHz Impedance [] [] [] Balance (Relative to 9º) Handing Ω [] Deg Watts Min. Max. Typ. Min. Typ. Min. Typ. Typ. Max. Typ. Max. Typ. Max Max. DB6N24ANTR DB6N24ANTR DB6N26ANTR DB6NANTR DB6N5ANTR DB6N46ANTR DB6N55ANTR DB6N58ANTR NOTE: Additional Frequencies Available Upon Request 7
2 DB6N 9 Couplers 24MHz to 224MHz DB6N24ANTR -2 Return Loss - Input Insertion Loss Amplitude Balance
3 DB6N 9 Couplers 24MHz to 224MHz DB6N24ANTR Phase Balance Isolation
4 DB6N 9 Couplers 22MHz to 26MHz DB6N24ANTR - Return Loss - Input Insertion Loss Amplitude Balance
5 DB6N 9 Couplers 22MHz to 26MHz DB6N24ANTR 8 Phase Balance Isolation
6 DB6N 9 Couplers 24MHz TO 28MHz DB6N26ANTR - Return Loss - Input Insertion Loss Amplitude Balance
7 DB6N 9 Couplers 24MHz TO 28MHz DB6N26ANTR 8 Phase Balance Isolation
8 DB6N 9 Couplers 285MHz to 5MHz DB6NANTR - Return Loss - Input Insertion Loss Amplitude Balance
9 DB6N 9 Couplers 285MHz to 5MHz DB6NANTR Phase Balance Isolation
10 DB6N 9 Couplers 2MHz to 8MHz DB6N5ANTR - Return Loss - Input Insertion Loss Amplitude Balance
11 DB6N 9 Couplers 2MHz to 8MHz DB6N5ANTR 8 Phase Balance Isolation
12 DB6N 9 Couplers 42MHz TO 5MHz DB6N46ANTR -2 Return Loss - Input Isolation Insertion Loss
13 DB6N 9 Couplers 42MHz TO 5MHz DB6N46ANTR Amplitude Balance Phase Balance deg
14 DB6N 9 Couplers 5MHz TO 59MHz DB6N55ANTR -2 Return Loss - Input Isolation Insertion Loss
15 DB6N 9 Couplers 5MHz TO 59MHz DB6N55ANTR.5 Amplitude Balance Phase Balance
16 DB6N 9 Couplers 56MHz TO 6MHz DB6N58ANTR - Return Loss - Input Isolation Insertion Loss
17 DB6N 9 Couplers 56MHz TO 6MHz DB6N58ANTR Amplitude Balance Phase Balance deg
Detailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C
fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on
More informationModel BD1631J50100AHF
Model BD1631J51AHF Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1631J51AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output
More informationModel BD1722J50100A00
Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1722J51A is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation
More informationModel C2327J5003AHF Rev D
Model C2327J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C2327J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package.
More informationModel BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
More informationModel C0810J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler
Model C81J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C81J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It
More informationModel B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun
Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for
More informationModel PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
More informationModel PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
More informationModel BD4859L50100A00 Rev A
Model BD4859L51A Ultra Small Low Profile 63 Balun 5Ω to 1Ω Balanced Description The BD4859L51A is an ultra-small low profile balanced to unbalanced transformer designed for differential inputs and output
More informationModel PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
More informationModel BD2425N50200AHF. Ultra Low Profile 0404 Balun 50Ω to 200Ω Balanced
Model BD45N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD45N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
More informationModel C1517J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler
Model C57J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C57J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. The
More informationReturn loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.
Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
More informationModel PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
More informationATC 0603 LPF Series LGA Thin Film Low Pass Filter
ATC 63 LPF SERIES LGA THIN FILM LOW PASS FILTER ATC 63 LPF Series LGA Thin Film Low Pass Filter Features: 63 LGA Package Frequency Range: DC to 565 MHz Characteristic Impedance: 5Ω Low Insertion Loss:.35
More informationMultilayer Organic (MLO TM )
HOW TO ORDER DP 03 C 1580 Type Size Design Frequency (MHz) QUALITY INSPECTION 1 6 1 6 1 6 2 5 2 5 2 5 3 4 3 4 3 4 MLO TM TECHNOLOGY Finished parts are 100% tested for electrical parameters and visual characteristics.
More informationModel DC4859J5005AHF. Ultra Low Profile db Directional Coupler
Model DC4859J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Features: 47-59 MHz Mean Coupling 5dB Ultra Low Insertion
More informationTop View (Near-side) Side View Bottom View (Far-side) ± ±.08. 4x.28. Orientation Marker Balanced port 1.
Model BD2FAHF Ultra Low Profile 168 Balun Ω to Ω Balanced Description The BD2FAHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
More informationTop View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker.
Model B2F2AHF Ultra Low Profile 168 Balun Ω to 2Ω Balanced Description The B2F2AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
More informationInsertion loss (db) Return Loss (db) Orientation Marker Denotes Pin Location. Configuration-4 Coupled GND. Direct. Direct Isolated.
Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Features: 33 38 MHz Mean Coupling 5dB Ultra Low Insertion Loss WiMax,
More informationATC HPF Series Multilayer Organic High Pass Filters
ATC HPF Series Multilayer Organic High Pass Filters Features: Sharp Cut-off Response Low Insertion Loss Excellent Stopband Rejection Characteristic Impedance: 5Ω Operating Temperature: -55 C to +85 C Low
More information3dB HYBRID COUPLER. Amplitude Balance db (max) ± ± to +85
FEATURES High Power Low Profile Surface Mount Package Very Low Insertion Loss Excellent Amplitude and Phase Balance High Isolation RoHS Tape and Reel for High Volume Production APPLICATIONS Power Amplifiers
More informationTypical Performance 1. Absolute Maximum Ratings. Parameter
Device Features Typical Isolation = 23 db Typical Insertion Loss = 0.5 db MSL 3 moisture rating Lead-free/RoHS-compliant SOIC-8 Plastic Package With exposed back side ground pad Product Description BeRex
More informationSMT Hybrid Couplers, RF Parameters and Applications
SMT Hybrid Couplers, RF Parameters and Applications A 90 degree hybrid coupler is a four-port device used to equally split an input signal into two signals with a 90 degree phase shift between them. The
More informationModel 2425B50-50C Rev. A
rit Model 2425B50-50C Xinger Balun 50Ω to 100Ω Balanced Description The 2425B50-50C is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations
More informationATC BPF Series Multilayer Organic Band Pass Filters
ATC BPF SERIES MULTILAYER ORGANIC BAND PASS FILTERS ATC BPF Series Multilayer Organic Band Pass Filters Features: Sharp Roll-Off Characteristics Low Insertion Loss Excellent Stopband Rejection Characteristic
More informationInsertion loss (db) Return Loss (db) 4x x x Orientation Marker Denotes Pin Location
Model DC1722J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Description The DC1722J55AHF is a low cost, low profile
More informationTypical Performance 1. Absolute Maximum Ratings. Parameter
Device Features Typical Isolation = 23 db Typical Insertion Loss = 0.4 db MSL 3 moisture rating Lead-free/RoHS-compliant SOIC-8 Plastic Package With exposed back side ground pad Product Description BeRex
More informationElectrical Specifications. Insertion to +85 TOP VIEW SIDE VIEW BOTTOM VIEW. Pin 2. Yantel Corporation
Description The is a low profile, high performance 20dB directional coupler. It is designed for DCS & PCS applications. This component is suitable for feed-forward amplifier and signal sampling circuits
More informationATC 1206 LPF Series High Performance LGA Thin Film Low Pass Filter
ATC 126 LPF Series High Performance LGA Thin Film Low Pass Filter Features: Sharp Cut-off Response Excellent Stopband rejection Characteristic : 5Ω No External Matching Low Power Rating: 12 W Low Profile
More informationData Sheet. ACMD-7605 Miniature UMTS Band 8 Duplexer. Description. Features. Specifications
ACMD-765 Miniature UMTS Band 8 Duplexer Data Sheet Description The Avago Technologies ACMD-765 is a miniature duplexer designed for use in UMTS Band 8 (88 915 MHz UL, 925 96 MHz DL) handsets and mobile
More informationAnaren 0805 (B0809J50ATI) balun optimized for Texas Instruments CC1100/CC1101 Transceiver
(ANN-2005) Rev B Page 1 of 13 Anaren 0805 (B0809J50ATI) balun optimized for Texas Instruments CC1100/CC1101 Transceiver Trong N Duong RF Co-Op Nithya R Subramanian RF Engineer Introduction The tradeoff
More informationModel X3DC18E2S Rev B
b Doherty Combiner Description The X3DC18E2S is a low profile, high performance Doherty Combiner in a new easy to use, manufacturing friendly surface mount package. The X3DC18E2S is designed particularly
More informationApril Multilayer Balun. For MHz HHM17146A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s April 2015 Multilayer Balun For 1920-2170MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Balun For 1920-2170MHz Conformity to RoHS Directive SHAPES AND DIMENSIONS
More informationTQQ7399 DC 2700 MHz Through Line
Applications General Purpose Wireless RF Bypass Paths Microwave Radio Test & Measurement Scientific Instruments Product Features 6 Pin 3 x 3 mm leadless SMT Package Functional Block Diagram DC 2700 MHz
More informationData Sheet. ACFF-1024 ISM Bandpass Filter ( MHz) Description. Features. Specifications. Functional Block Diagram.
ACFF-124 ISM Bandpass Filter (241 2482 MHz) Data Sheet Description The Avago ACFF-124 is a miniaturized Bandpass Filter designed for use in the 2.4 GHz Industrial, Scientific and Medical (ISM) band. The
More informationHybriX SMT Power Dividers
Introduction HybriX SMT Features Lead free and RoHS compliant Frequency ranges from 420 MHz to 2.4 GHz Low Insertion Loss Surface Mountable High Power: 50 W Max (at 85 C) Excellent Isolation and low VSWR
More informationJune Multilayer Band Pass Filter (Balance Output Type) For MHz DEA202450BT-7077A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s June 215 Multilayer Band Pass Filter (Balance Output Type) For 24-25MHz 2.x1.25mm [EIA 85]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter (Balance Output Type) For 24-25MHz
More informationHC2000W03 Hybrid Coupler 3 db, 90 o
Description The is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for GS & WLAN band applications. The is particularly
More informationData Sheet. ACMD-6125 Band 25 Duplexer. Description. Features. Specifications, 10 C to +85 C. Applications. Functional Block Diagram
ACMD-6125 Band 25 Duplexer Data Sheet Description The Avago ACMD-6125 is a highly miniaturized duplexer designed for use in Band 25 (185.25 1914.75 MHz UL, 193.25 1994.75 MHz DL) handsets and mobile data
More informationElectrical Specifications Frequency Isolation. Power. Degrees Avg. CW Watts ºC. 90 ± to +95 TOP VIEW SIDE VIEW BOTTOM VIEW.
Description The is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for CMMB band applications. The is designed particularly
More informationGHz LOW NOISE AMPLIFIER WHM AE 1
.. GHz LOW NOISE AMPLIFIER WHM-AE WHM-AE LNA is a low noise figure, wideband, and high linearity SMT packaged amplifier. The amplifier offers typical noise figure of.9 db and output IP of. dbm at the frequency
More informationESD Sensitive Component!!
5 MHz LOW NOISE AMPLIFIER WHM3AE 1 REV E WHM3AE LNA is a low noise figure, wideband, and high linear SMT packaged amplifier with exceptional gain flatness design. The amplifier offers typical.7 db noise
More informationATC 1206 LPF Series High Performance SMT Thin Film Low Pass Filter
ATC 126 HIGH PERFORMANCE LOW PASS FILTER ATC 126 LPF Series High Performance SMT Thin Film Low Pass Filter Features: Sharp Cut-off Response Excellent Stopband rejection Characteristic : 5Ω No External
More informationGHz LOW NOISE AMPLIFIER WHM AE 1
2.2 2.7 GHz LOW NOISE AMPLIFIER WHM25-3020AE 1 REV B WHM25-3020AE LNA is a low noise figure, wideband, and low power SMT packaged amplifiers with unconditional stable design. The amplifier offers typical
More informationData Sheet. ACMD-6003 UMTS Band 3 Duplexer. Features. Description. Specifications. Applications. Functional Block Diagram
ACMD-63 UMTS Band 3 Duplexer Data Sheet Description The Avago ACMD-63 is a highly miniaturized duplexer designed for use in UMTS Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data terminals.
More informationSchematic and Application Circuit RF COMMON. DUT RF Section. Internal CMOS Driver. Control VDD
Ceramic, Hermetic SPDT RF Switch Absorptive RF Switch with internal driver. Single Supply Voltage, +3V to +5V Product Features Wide bandwidth, 500 to 6000 MHz High Isolation, 65 typ. at 1 GHz Low insertion
More informationData Sheet. ACMD-7409 Miniature PCS Band Duplexer. Features. Description. Specifications. Applications. Functional Block Diagram
ACMD-749 Miniature PCS Band Duplexer Data Sheet Description The Avago ACMD-749 is a miniature duplexer designed for US PCS handsets. The ACMD-749 is designed with Avago Technologies Film Bulk Acoustic
More informationVoltage Variable Equalizer
Surface Mount Voltage Variable Equalizer 5Ω 95 to 2 MHz The Big Deal Adjustable attenuation slope Supply voltage from + to + IP3 +55 dbm typical Minimal deviation from linear loss, ±.5dB CASE STYLE: HE1354
More informationData Sheet. ACMD-6307 LTE Band 7 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-637 LTE Band 7 Duplexer Data Sheet Description The Avago ACMD-637 is a highly miniaturized duplexer designed for use in LTE Band 7 (25 257 MHz UL, 262 269 MHz DL) handsets and mobile data terminals.
More informationTypical Performance Data
Ceramic Balun RF Transformer 50Ω 720 to 1600 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C Input RF Power*** 3W **Derate linearly to 2.5W at 100 C Permanent
More informationData Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-613 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-613 is a highly miniaturized duplexer designed for use in LTE Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data
More informationOctober Multilayer Balun. For MHz HHM1908A2. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s October 2017 Multilayer Balun For 4900 5950MHz 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA] Multilayer Balun For 4900 5950MHz Conformity to RoHS Directive SHAPES AND DIMENSIONS
More informationModel X3DC07E2S. Doherty Combiner. Mechanical Outline
b Model X3DC7E2S Doherty Combiner Description The X3DC7E2S is a low profile, high performance Doherty Combiner in a new easy to use, manufacturing friendly surface mount package. The X3DC7E2S is designed
More informationData Sheet. ACMD-7612 Miniature UMTS Band I Duplexer. Features. Description. Specifications. Applications. Functional Block Diagram
ACMD-7612 Miniature UMTS Band I Duplexer Data Sheet Description The Avago ACMD-7612 is a miniature duplexer designed for use in UMTS Band I handsets. Maximum Insertion Loss in the channel is only 1.5 db,
More informationMA4P T. Quad PIN Diode π Attenuator MHz. M/A-COM Products Rev. V2. Features. Functional Schematic. Description.
1-4 MHz Features 4 PIN diodes in a SOT-2 Plastic Package Externally Selectable Bias and RF Matching Network 1 4, MHz Useable Frequency Band + 43 IP3 @ ( Ω) 1. db Loss @ ( Ω) 3 db Attenuation @ ( Ω) Lead-Free
More informationMarch Thin-Film Directional Coupler. For MHz / MHz TFSC A1X. 0.65x0.5mm [EIA 0202]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s March 17 Thin-Film Directional Coupler For 2400-2500MHz / 4900-5850MHz 0.65x0.5mm [EIA 02]* * Dimensions Code JIS[EIA] Thin-Film Directional Coupler For 2400-2500MHz / 4900-5850MHz
More informationHC0650F03 Hybrid Coupler 3 db, 90 o
Description The is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for CMMB band applications. The is designed particularly
More informationMAAP PKG003 YYWW AP067G XXX MACOM. Amplifier, Power, 2W GHz. Primary Applications: M/A-COM Products Rev D. Features.
Features 2 Watt Saturated Output Power Level Variable Drain Voltage (6-V) Operation x mm Lead PQFN Package RoHS Compliant Description The MAAP-67-PKG3 is a 3-stage 2 W power amplifier with on-chip bias
More informationData Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-613 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-613 is a highly miniaturized duplexer designed for use in LTE Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data
More informationPreliminary Datasheet
Product Description The is a reflective SPDT RF switch that can be used in high power and good performance WLAN 802.11 a/b/g/n/ac/ax, DOCSIS 3.0/3.1 and Wireless Communication applications. This device
More informationHMC284AMS8G / HMC284AMS8GE
Typical Applications The is ideal for: Cellular/PCS Base Stations 2.4 GHz ISM 3.5 GHz Wireless Local Loop Functional Diagram Features High Isolation: >45 Positive control: 0/+5V Non-Reflective Design Ultra
More informationMA4P7470F-1072T. Non Magnetic MELF PIN Diode. Features. Description and Applications. Designed for Automated Assembly
Features Non-Magnetic Package Suitable for MRI Applications Rectangular MELF SMQ Ceramic Package Hermetically Sealed Low Rs for Low Insertion Loss Long τ L for Low Intermodulation Distortion Low Cj for
More informationPreliminary Datasheet
Product Description The is a reflective SPDT RF switch that can be used in high power and good performance WLAN 802.11 a/b/g/n/ac/ax, DOCSIS 3.0/3.1 and Wireless Communication applications. This device
More informationHybriX 3dB Hybrid Couplers
Introduction HybriX 3dB Hybrid Couplers Features Lead Free, RoHS compliant Frequency ranges from 150 MHz to 4.0 GHz Low Insertion Loss Surface Mountable High Power to 250 W (at 85 C) 90 Quadrature Excellent
More informationVI TELEFILTER Filter specification TFS 130C 1/5
VI TELEFILTER Filter specification TFS 130C 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 130 Ω -11.6 pf Output: 86 Ω -11.8 pf Characteristics
More informationPower Splitter/Combiner
Surface Mount Power Splitter/Combiner 2 Way-0 50Ω 950 to 1300 MHz + Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C Power Input (as a splitter) 10W max. Internal
More informationJune Multilayer Band Pass Filter (Balance Output Type) For MHz DEA202450BT-7210A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s June 215 Multilayer Band Pass Filter (Balance Output Type) For 24 25MHz DEA2245BT-721A1 2.x1.25mm [EIA 85]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter (Balance Output
More informationDO IT YOURSELF LOW-COST DIRECTIONAL COUPLERS
/ AN-30-001 Application Note on DO IT YOURSELF LOW-COST DIRECTIONAL COUPLERS Radha Setty Weiping Zheng Mini-Circuits Engineering Department, P.O. Box 350166, Brooklyn, NY 11235 AN-30-001 Rev.: A M150261
More informationHMC241AQS16 / 241AQS16E
v00.1213 Typical Applications Features The HMC241AQS16 & HMC241AQS16E are ideal for: Base Stations & Portable Wireless CATV / DBS Wireless Local Loop Test Equipment Functional Diagram RoHS Compliant Product
More informationData Sheet. ACMD-4102 UMTS/NCDMA/Co-band GSM Rx Band 2 Duplexer with Balanced Rx Port. Features. Description. Specifications.
ACMD-412 UMTS/NCDMA/Co-band GSM Rx Band 2 Duplexer with Balanced Rx Port Data Sheet Description The Avago ACMD-412 is a highly miniaturized duplexer designed for use in UMTS and NCDMA Band 2 (185.48 199.52
More informationFeatures. = +25 C, Vdd = +5 Vdc, 50 Ohm System. trise, tfall (10/90% RF) ton, toff (50% CTL to 10/90% RF)
Typical Applications The HMC174MS8 / HMC174MS8E is ideal for: ISM Applications PCMCIA Wireless Cards Portable Wireless Features Ultra Small Package: MSOP8 High Third Order Intercept: +60 m Single Positive
More informationUM4000/UM Microsemi Microwave Products 75 Technology Drive, Lowell, MA , , Fax:
UM4 / UM49 DESCRIPTION The UM4 and UM49 series features high power PIN diodes with long carrier lifetimes and thick I-regions. They are especially suitable for use in low distortion switches and attenuators,
More information- 01DB = 1dB, - 02DB = 2dB, - 03DB = 3dB, - 04DB = 4dB, - 05DB = 5dB, - 06DB = 6dB, - 07DB = 7dB, - 08DB = 8dB, - 09DB = 9dB, - 10DB = 10dB
AT02M750.06 - Page 1 of 14 Product Family: Part Number Series: Temperature Variable Attenuators ATV0805C Series Construction: High purity Alumina Substrate Thermo-sensitive thermistor Ni alloy thin-film
More informationMAAM Wideband Amplifier 10 MHz - 40 GHz Rev. V2. Features. Functional Schematic. Description. Pin Configuration. Ordering Information 1,2
MAAM-1119 1 MHz - 4 GHz Rev. V2 Features 13 db Gain Ω Input / Output Match +18 dbm Output Power + V DC, 19 ma Lead-Free mm 9-lead LGA Package RoHS* Compliant and 26 C Reflow Compatible Description The
More informationDifferential Input / Output Impedance Match SM X 5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, S=shift) 15 pf
SF1189B-1 Designed for WLAN IF Applications Low Insertion Loss 5.0 x 5.0 x 1.7 mm Suface-Mount Case Single Ended or Differential Input and Output Differential Output Complies with Directive 2002/95/EC
More informationSAW Bandpass Filter F4521
Features RF bandpass filter for CDMA0 CBand Tx. Part Usable bandwidth MHz (0 MHz ~ MHz) High attenuation No matching 0Ω singleended operation Ceramic Surface Mounted Device Package (.8 mm.8 mm ) RoHS compliant
More information2 Way-0 Power Splitter/Combiner GP2Y+ Typical Performance Data
MMIC Surface Mount Power Splitter/Combiner 2 Way-0 50Ω 1600 to 3300 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -65 C to 150 C Power Input (as a splitter) 1.5W max. Internal
More informationData Sheet. ACFF-1025 LTE Band 41 Bandpass Filter. Features. Description. Specifications. Functional Block Diagram. Applications
ACFF-125 LTE Band 41 Bandpass Filter Data Sheet Description The Avago ACFF-125 is a highly miniaturized LTE Band 41 (2496 269 MHz) bandpass filter combined with a WLAN/Wi-Fi band reject filter. The ACFF-125
More information2 Way-0 Power Splitter/Combiner GP2S1+ Typical Performance Data
MMIC Surface Mount Power Splitter/Combiner 2 Way-0 50Ω 500 to 2500 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -65 C to 150 C Power Input (as a splitter) 1.5W max. Internal
More informationFeatures wide bandwidth 10 to 3000 MHz balanced transmission line excellent return loss aqueous washable patent pending
Surface Mount top hat RF Transformer 50Ω 10 to 3000 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power 0.4W DC Current 30mA Permanent damage may occur if
More information- 01DB = 1dB, - 02DB = 2dB, - 03DB = 3dB, - 04DB = 4dB, - 05DB = 5dB, - 06DB = 6dB
AT02M750.08 - Rev A - Page 1 of 10 Product Family: Part Number Series: Temperature Variable Attenuators ATV0805J Series (10GHz) Construction: High purity Alumina Substrate Thermo-sensitive thermistor Ni
More informationPin Configuration. Surface Mount 7.00 x 5.50 x 1.24 mm
Features For WiBro and WiMAX applications Usable bandwidth 10 MHz High attenuation operation 200 Ω Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pbfree Pb 6 MHz SAW Filter Package
More informationHigh Frequency Ceramic Solutions
Page 1 of 6 Do you need a small sub-ghz or 2.4GHz antenna? Go to: /antennas General Specifications Part Number 9PC15A36 Frequency (MHz) 862-928 24-25 Insertion Loss (db) 1.8 typ (2. max.) 1.3 typ (1.6
More information- 01dB = 1dB, - 02dB = 2dB, - 03dB = 3dB, - 04dB = 4dB, - 05dB = 5dB, - 06dB = 6dB, - 07dB = 7dB, - 08dB = 8dB, - 09dB = 9dB, - 10dB = 10dB
AT02M0.09 - Page 1 of 13 Product Family: Part Number Series: Temperature Variable Attenuators ATV112F Series Construction: High purity Alumina Substrate Thermo-sensitive thermistor Ni alloy thin-film resistive
More informationData Sheet. ACMD-7402 Miniature PCS Band Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-742 Miniature PCS Band Duplexer Data Sheet Description The Avago ACMD-742 is a miniature duplexer designed for US PCS handsets. The ACMD-742 is designed with Avago Technologies Film Bulk Acoustic
More informationNote: This model is same as ZFSWA2R-63DR+ except RF1 and RF2 ports are interchanged.
Absorptive SPDT RF Switch 50Ω 500-6000 MHz The Big Deal Wide bandwidth 500 to 6000 MHz Very high isolation, 65 at 1GHz Very fast switching, 35ns Rugged case with internal hermetically sealed ceramic semi-conductor
More informationPreliminary. Electrical Characteristics Characteristic Sym Notes Min Typ Max Units
Preliminary SF1202D CDM 450 F-and RF SW Filter 3.8 x 3.8 x 1.4 mm Surface-mount Package Complies with Directive 2002/95/EC (RoHS) bsolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband
More informationMACP Temperature Compensated Directional RMS Power Detector 2-6 GHz Rev. V1 Features Integrated Directional Coupler Low Insertion Loss: 0.15 db
Features Integrated Directional Coupler Low Insertion Loss: 0.15 db @ 4 GHz Min. detectable power: -15 dbm @ 4 GHz Dynamic range: 45 db @ 4 GHz Built-In Temperature Compensation Lead-Free 1.5 x 1.2 mm
More informationStop Band Rejection Loss F4 - F db F db 1
Ceramic Low Pass Filter 50Ω Applications DC 1 to 990 MHz Features Low loss, 0.4 db typ. Small size 0805 (2.0 x 1.25 mm) Temperature stable LTCC construction Harmonic Rejection VHF/UHF transmitters / receivers
More informationParameter Min. Typ. Max. Units
v4.112 Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features General Description The is a
More informationPin Configuration. Surface Mount x 6.50 x 1.75 mm SMP-75B
Features For broadband applications Typical 3 bandwidth of 4.9 MHz High attenuation Singleended operation Ceramic Surface Mount Package (SMP) Replaces Sawtek P/N 851551 (BW 3=4.5 MHz) Hermetic RoHS compliant
More informationIPP Directional Coupler, SMD, Application Notes
IPP Directional Coupler, SMD, Application Notes General Notes: o Data and specifications apply when part is mounted in IPP test fixture and terminated into a good 50 Ohm Load. o Keep un-copper clad channel
More informationHigh Power PIN Diodes
Applications Series/shunt elements in high power HF/VHF/ UHF transmit/receive (T/R) switches Features Very low thermal resistance for excellent power handling: 40 W C/W typical Low series resistance SMP1324-087LF:
More informationDEA211898BT-9033B1. Multilayer Band Pass Filter (Balance Output Type) (2in1) For MHz / MHz. 2.0x1.5mm.
R F C o m p o n e n t s October 5 Multilayer Band Pass Filter (Balance Output Type) (in) For 869-96MHz / 85-5MHz DEA898BT-9B.x.5mm * Dimensions Code JIS Multilayer Band Pass Filter (Balance Output Type)
More informationHMC540SLP3E v db LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, GHz
HMC54SLP3E v.95 LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR,. - 8 GHz Typical Applications Features The HMC54SLP3E is ideal for both RF and IF applications: Cellular Infrastructure Wireless
More informationOBSOLETE HMC915LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram. General Description
v1.5 LO AMPLIFIER,.5-2.7 GHz Typical Applications The is ideal for: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM & Fixed Wireless Functional Diagram Features Input IP3: +28 dbm Low
More informationVectron International Filter specification TFS140AV 1/5
Vectron International Filter specification TFS140AV 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 50 Ω -78 pf Output: 95 Ω -52 pf Characteristics
More informationSAW Bandpass Filter F2G12
SAW Bandpass Filter FG Features WCDMA applications Usable bandwidth of 60 MHz No impedance matching require for operation at 50 Ω Ceramic Surface Mounted Device Package (.0 mm *.0 mm ) Singleended Operation
More information