AUTOCAD, STEP, IGES & PDF. EZ-SCREEN Point Systems

Transcription

1 EZ-SCREE (TYPE & TYPE ) PICO-GUARD FIBER OPTIC (TYPE ) MACHIE SAFETY ACCESSORIES 500 EZ-SCREE Type Grids and Points Suited to a variety of access and long-range perimeter guarding applications Uses -, -, - or -beams to protect personnel and machinery Operates in ranges from 0.8 to 0 m or 5 to 70 m, depending on model Displays operating status, configuration and error codes Includes blocked beam zone indicators Features user-configurable trip or latch outputs, and Scan Code or Can be combined with other devices, such as mirrors and Points, for a custom configuration Resists impact, twisting and abusive environments with a durable aluminum housing and metal endcaps Exceeds OSHA/ASI Control Reliability requirements and is certified to cuus IPF, and certified to Type and Category Offers optional lens shields and enclosures for added durability Easy to hookup and flexible machine interface options Interface multiple devices with the SC- Safety Controller. See 56 online AUTOCAD, STEP, IGES & PDF 55.0 mm Full View 5.0 mm EZ-SCREE Grid Systems EZ-SCREE Point Systems EZ-SCREE Grid EZ-SCREE Point Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

2 EZ-SCREE Grid & Point Systems, V dc Protected Height 066 mm 900 mm 800 mm Beam Spacing Range Connection 5 -BEAM mm 00 -BEAM mm 00 -BEAM mm m Housing ength () 5 mm Output Emitter Receiver Pair SGE-5Q8E SGR-5Q8E SGP-5Q88E 5-70 m SGXE-5Q8E SGXP-5Q88E m 08 mm SGE-00Q8E SGR-00Q8E SGP-00Q88E 5-70 m SGXE-00Q8E SGXP-00Q88E m 98 mm SGE-00Q8E SGR-00Q8E SGP-00Q88E 5-70 m SGXE-00Q8E SGXP-00Q88E PP OSSD 8-pin Euro QD (Trip/atch selectable) m SGE-58Q8E SGP-58Q88E Photoelectrics Fiber Optic Special Purpose Measurement & Inspection Vision Wireless ighting & Indicators Safety ight Screens Safety aser Scanners Fiber Optic Safety Systems Safety Controllers & Modules Safety Two-Hand Control Modules Safety Interlock Switches Emergency Stop & Stop Control ACCESSORIES mm 58 -BEAM mm 768 mm SGR-58Q8E 5-70 m SGXE-58Q8E SGXP-58Q88E 500 mm 500 -BEAM mm m SGE-500Q8E SGP-500Q88E 68 mm SGR-500Q8E 5-70 m SGXE-500Q8E SGXP-500Q88E m SPEQ8E SPPQ88E EZ-SCREE TYPE or 0 mm TYPE ow Profile or 5 mm TYPE 0 mm GridS & Points PICO-GUARD /A -BEAM 9 mm SPRQ8E 5-70 m SPXEQ8E SPXPQ88E A model with a QD requires a mating cordset (see 500). For emitters and receivers with a wiring terminal chamber, remove the Q8E or Q88E from the model number (example, SGE-00). For an emitter with a 5-pin Mini QD and TEST function, replace Q8E with Q5 on emitter model numbers (example, SGE-00Q5) and Q88E with Q85 on pair model numbers (example, SGP-00Q85). For emitters with a -pin Mini QD, replace Q8E with Q (example, SGE-00Q); and for receivers with an 8-pin Mini QD, replace Q8E with Q8 on model numbers (example, SGR-00Q8); or for a pair replace Q88E with Q8 (example, SGP-00Q8). A pair includes an emitter and receiver (example, SGP-00Q88E). Emitters (example, SGE-00Q8E) and receivers (example, SGR-00Q8E) are also sold separately. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

3 EZ-SCREE (TYPE & TYPE ) PICO-GUARD FIBER OPTIC (TYPE ) EZ-SCREE Grid Kits You can purchase a kit that contains an emitter and receiver of equal length and beam spacing; brackets; and optional interfacing solution and quick-disconnect cordsets. Detailed information about individual kit components is as follows. MACHIE SAFETY ACCESSORIES 500 To Order:. Choose model range, number of beams and beam spacing.. Choose the connection: Integral M/Euro-Style QD or intergal Mini-Style QD. Choose an optional interfacing solution, such as an IM-T-9A or - interfacing model. See for complete information and a current listing of accessories and options for kitting components. Call factory with questions regarding accessories. Emitter and Receivers Page 95 Interfacing Options 50 Cordsets 500 Brackets 500. Choose one cordset for each sensor or two cordsets for a pair. M/Euro QD models (example, SGK-00Q88E) require mating 8-pin M/Euro QD cordsets, such as: - QDE cordset with flying leads - DEER double-ended cordset - CSB series splitter cordset Mini QD models (example, SGK-00Q8) require mating cordsets, such as: - QDS cordset with flying leads Kit Model Key Model Style Kit o. of Beams Beam Connection Interfacing QD Cordset Spacing Options ength Options S G K 0 0 Q 8 8 E R E 5 Model Style SG = Safety Grid SGX = Safety Grid ong Range o. of Beams = two beams = three beams = four beams Beam Spacing 00 mm 00 mm 500 mm 5 mm 58 mm Kit K = Kit Receiver & Emitter QD Options Blank = Receiver and emitter with wiring terminal chamber Q85 = Receiver with integral 8-pin QD Emitter with integral 5-pin QD with Test Q8 = Receiver with integral 8-pin QD Emitter with integral -pin QD Q88E = Receiver and emitter with integral 8-pin M/Euro QD QD Cordset ength Examples RE5 =.6 m, each RE5 = 7.6 m, each R5E5 =.6 m (Receiver) & 7.6 m (Emitter) R5E5 = 7.6 m (Receiver) &.6 m (Emitter) DD = 0. DEER-8D, each CD5 = CSB-M8M8 (Receiver) DEER-85D (8-pin Emitter) C8D5 = CSB-M88M8 (Receiver) DEER-85D (8-pin Emitter) CU5D5 = CSB-UT85M8 (Receiver) DEER-85D (8-pin Emitter) Interfacing Examples = IM-T-9A Interface Module, each ( O) = IM-T-A Interface Module, each ( O/ C) = -BG00--D-0 Contactors (0A), each = BF80-0 Contactors (8A), each 5 = EZAC-R9-QE8 = AC Interface Box ( O), each 6 = EZAC-R-QE8 = AC Interface Box ( O/ C), each OTE: See notes under model number table. ot all combinations are listed below. Contact Banner Engineering Corp. for additional information and/or verification of valid kit model numbers. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

4 EZ-SCREE Point Kits You can purchase a kit that contains an emitter and receiver of equal length; brackets; and optional interfacing solution and quick-disconnect cordsets. Detailed information about individual kit components is as follows. To Order:. Choose model and range.. Choose the connection: Integral M/Euro-Style QD or intergal Mini-Style QD. Choose an optional interfacing solution, such as an IM-T-9A or - interfacing model. Emitter and Receivers Page 95 Interfacing Options 50 Cordsets 500 Brackets 500 See for complete information and a current listing of accessories and options for kitting components. Call factory with questions regarding accessories.. Choose one cordset for each sensor or two cordsets for a pair. M/Euro QD models (example, SPK-Q88E) require mating 8-pin M/Euro QD cordsets, such as: - QDE cordset with flying leads - DEER double-ended cordset - CSB series splitter cordset Mini QD models (example, SPK-Q8) require mating cordsets, such as: - QDS cordset with flying leads Photoelectrics Fiber Optic Special Purpose Measurement & Inspection Vision Wireless ighting & Indicators Safety ight Screens Safety aser Scanners Fiber Optic Safety Systems Safety Controllers & Modules Safety Two-Hand Control Modules Safety Interlock Switches Emergency Stop & Stop Control ACCESSORIES 500 Kit Model Key Model Style Kit o. of Beams Connector Interfacing QD Cordset Options ength Options SP K Q 8 8 E R E 5 EZ-SCREE TYPE or 0 mm TYPE ow Profile or 5 mm TYPE 0 mm GridS & Points PICO-GUARD Model Style SP = Safety Point SPX = Safety Point ong Range o. of Beams = one beam Kit K = Kit Receiver & Emitter QD Options Blank = Receiver and emitter with wiring terminal chamber Q85 = Receiver with integral 8-pin QD Emitter with integral 5-pin QD with Test Q8 = Receiver with integral 8-pin QD Emitter with integral -pin QD Q88E = Receiver and emitter with integral 8-pin M/Euro QD OTE: See notes under model table. ot all combinations are listed below. Contact Banner Engineering Corp. for additional information and/or verification of valid kit model numbers. QD Cordset ength Examples RE5 =.6 m, each RE5 = 7.6 m, each R5E5 =.6 m (Receiver) & 7.6 m (Emitter) R5E5 = 7.6 m (Receiver) &.6 m (Emitter) DD = 0. DEER-8D, each CD5 = CSB-M8M8 (Receiver) DEER-85D (8-pin Emitter) C8D5 = CSB-M88M8 (Receiver) DEER-85D (8-pin Emitter) CU5D5 = CSB-UT85M8 (Receiver) DEER-85D (8-pin Emitter) Interfacing Examples = IM-T-9A Interface Module, each ( O) = IM-T-A Interface Module, each ( O/C) = -BG00--D-0 Contactors (0A), each = BF80-0 Contactors (8A), each 5 = EZAC-R9-QE8 = AC Interface Box ( O), each 6 = EZAC-R-QE8 = AC Interface Box ( O/ C), each Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

5 EZ-SCREE (TYPE & TYPE ) PICO-GUARD FIBER OPTIC (TYPE ) EZ-SCREE Grid & Point Specifications Supply Voltage (V in) V dc ±5%, 0% max. ripple MACHIE SAFETY Supply Current Short Circuit Protection Response Time EDM Input Reset Input Remote Test Input (optional- available only on certain models) Safety Outputs Emitter: 50 ma max. Receiver: 500 ma max., exclusive of OSSD and OSSD loads (up to an additional 0.5A each) All inputs and outputs are protected from short circuits to V dc or dc common (except Emitter AUX power connections) milliseconds or less from interruption of light grid beam to safety outputs going to OFF-state V dc signals from external device contacts can be monitored (single-channel, dual-channel or no monitoring) via EDM and EDM terminals in the receiver. Monitored devices must respond within 00 milliseconds of an output change. The Reset input must be high (0 to 0V dc at 0 ma) for 0.5 to seconds and then low (less than V dc) to reset the receiver. Test mode is activated either by applying a low signal (less than V dc) to emitter TEST terminal for a minimum of 50 milliseconds, or by opening a switch connected between TEST and TEST terminals for a minimum of 50 milliseconds. Beam scanning stops to simulate a blocked condition. A high signal (0 to 0V dc, 5 ma inrush, 0 ma max.) at TEST terminal deactivates Test mode and allows the emitter to operate normally. TEST and TEST are factory jumpered on models with wiring chamber. Two diverse-redundant solid-state V dc, 0.5 A max. sourcing OSSD (Output Signal Switching Device) safety outputs. (Use optional interface modules for ac or larger dc loads.) Capable of the Banner Safety Handshake. O-State voltage: Vin-.5V dc OFF-State voltage:.v dc max. Max. load resistance: 000 Ω Max. load capacitance: 0. µf OSSD test pulse width: 50 microseconds OSSD test pulse period: 6 milliseconds Controls and Adjustments Emitter: Scan code selection: -position switch (code or ). Factory default position is. Receiver: Scan code selection: -position switch (code or ). Factory default position is. Trip/latch output selection: redundant switches. Factory default position is (latch) EDM/MPCE monitor selection: redundant switches select between - or -channel monitoring. Factory default position is. Emitter/Receiver Operating Range Short-range models: 0.8 m to 0 m ong-range models: 5 m to 70 m Range decreases with use of mirrors and/or lens shields. Beam Spacing Model SG...-00: 00 mm Model SG...-00: 00 mm Model SG : 500 mm Model SG...-5: 5. mm Model SG...-58: 58. mm Beam Diameter 5 mm Ambient ight Immunity Strobe ight Immunity Emitter Elements > 0,000 lux at 5 angle of incidence Totally immune to one Federal Signal Corp. Fireball model FBPST strobe Infrared EDs, 880 nm at peak emission Effective Aperture Angle (EAA) Meets Type requirements per IEC 696- Short-range models: m ong-range models: 5 m Enclosure Materials: Extruded aluminum housings with yellow polyester powder finish and well-sealed, rugged molded PBT end caps, acrylic lens cover Rating: EMA, ; IP65 Operating Conditions Temperature: 0 to 50 C Relative humidity: 95% (non-condensing) Shock and Vibration EZ-SCREE systems have passed vibration and shock tests according to IEC 696-/-. This includes vibration (0 cycles) of 0-55 Hz at 0.5 mm single amplitude (0.70 mm peak-to-peak) and shock of 0 g for 6 milliseconds (6,000 cycles). Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

6 EZ-SCREE Grid & Point Specifications Status Indicators 7-Segment Diagnostic Indicators, Both Emitter and Receiver Dash ( ) = System is OK Error Codes = See product manuals (p/n 680 or 68) for code definitions and recommended action Scan code setting = Appears during power-up or after scan code is changed. (C or C) (Temporary indication; normal display resumes within a few seconds.) Emitter: One bi-color (red/green) Status indicator Green steady = RU mode Green single flashing = TEST mode Red single flashing = ockout OFF = o power to sensor Receiver: Two System Status indicators, plus one bi-color (red/green) Beam Status indicator for each beam Yellow Reset Indicator O steady = RU mode Double flashing = Waiting for manual reset after power-up Single flashing = Waiting for manual latch reset OFF = o power to sensor or system is not ready for operation Bi-Color (Red/Green) Status Indicator Green steady = Outputs O Red steady = RU mode, outputs OFF Red single flashing = ockout OFF = o power to sensor or system is not ready for operation Bi-Color (Red/Green) Beam Status Indicators Green steady = Clear beam, strong signal Green flickering = Clear beam, weak signal Red steady = Beam blocked OFF = o power to sensor or no scanning Mounting Hardware Emitter and receiver each are supplied with a pair of swivel end mounting brackets. Mounting brackets are 8-gauge cold-rolled steel, black zinc finish. Cables and Cables are user-supplied. Wiring terminals accommodate one to 6 ga. or two s up to 8 ga.; Pg.5 wiring chamber access port capacity varies, depending on cable gland or strain relief fitting used. Supplied cable gland is for a cable diameter of 6 to mm. Design Standards Designed to comply with Type per IEC 696-, -; Type per U 696-/-; Category per ISO 89- (E 95-) Certifications (cont d) Photoelectrics Fiber Optic Special Purpose Measurement & Inspection Vision Wireless ighting & Indicators Safety ight Screens Safety aser Scanners Fiber Optic Safety Systems Safety Controllers & Modules Safety Two-Hand Control Modules Safety Interlock Switches Emergency Stop & Stop Control EZ-SCREE TYPE or 0 mm TYPE ow Profile or 5 mm TYPE 0 mm GridS & Points PICO-GUARD Wiring Diagrams WD0, WD0, WD0, WD0, WD05, WD06, WD07, WD08, WD09 (pp ) Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

7 EZ-SCREE (TYPE & TYPE ) PICO-GUARD FIBER OPTIC (TYPE ) MACHIE SAFETY Cordsets ength Euro QD See Pin.57 m QDE-85D 7.6 m QDE-85D 5. m QDE-850D.9 m QDE-875D 0.5 m QDE-800D ength Additional cordset information available. See 679. Euro QD Splitter See 69 8-Pin 0 m CSB-M80M m CSB-M8M8.50 m CSB-M88M8.60 m CSB-M85M m CSB-M85M m CSB-UT85M8 Euro QD Double-Ended ength See m DEER-8D 0.9 m DEER-8D. m DEER-88D.57 m DEER-85D 7.6 m DEER-85D 5. m DEER-850D.9 m DEER-875D 8-Pin 0.5 m DEER-800D For connection to safety BUS gateway/node a smart self-monitored safety module, safety controller or safety PC see 69. Mini QD See 700 ength -Pin 5-Pin 8-Pin.75 m QDS-5C QDS-55C QDS-85C 7.6 m QDS-5C QDS-55C QDS-85C 5. m QDS-50C QDS-550C QDS-850C.9 m QDS-75C QDS-875C 0.5 m QDS-00C Brackets Grids & Points Type Points Type pg. 68 pg. 60 pg. 6 pg. 69 pg. 60 pg. 60 EZA-MBK- EZA-MBK- EZA-MBK-9 EZA-MBK- EZA-MBK- EZA-MBK-5 Additional bracket information available. See 60. Standard brackets included with emitter/receiver. One EZA-MBK- adapter bracket kit required per sensor when mounting to MSA series stands. OTE: See 50 for interfacing solutions. Replacement Parts Model EZA-AP- Access port plug with o-ring Description EZA-CP- EZA-ECE- EZA-ECR- EZA-SW- EZA-TBE- EZA-TBR- MGA-K- MGA-KS0- SMA-MBK- STP- Pg.5 plug with o-ring Emitter wiring chamber end cap (with gasket, captive screws, plugs with o-rings, terminal block) Receiver wiring chamber end cap (with gasket, captive screws, plugs with o-rings, terminal block) Spanner wrench for Grid and Point Emitter terminal block Receiver terminal block Replacement key for switch MGA-KS0- Panel-mount keyed normally open reset switch SSM Series Mirror Bracket Kit Specified test piece, 5 mm dia. ote: See Installation manual p/n 85 for complete list of replacement parts and accessories. STADS MIRRORS ES SHIEDS ITERFACE ECOSURES PAGE 7 PAGE 76 PAGE 7 PAGE 50 PAGE 78 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

8 WD0 Accessories EZ-SCREE System (Type ) Reference Emitter Receiver with Solid-State OSSDs, FSDs and -Channel EDM Hookups Wiring Diagrams V dc 0V dc Glossary International Reps Page 69 EZ-SCREE Grid & Point with terminal chamber hookup ( with M/Euro QD, see WD00) V dc 0V dc EZ-SCREE Emitter PE dc Com V dc TEST TEST 5 (ot Used) 6 V dc 7 dc Com 8 PE 9 or Auxiliary power connections Open to test EZ-SCREE Receiver PE dc Com V dc (ot Used) RESET 5 Single-Channel Safety Stop Circuit EDM 6 EDM 7 OSSD 8 OSSD 9 FSD Reset FSD Dual-Channel Safety Stop Circuit OTE: Do not exceed OSSD maximum load capacitance specification. Arc Suppressors. See manual for specific warnings. WD0 V dc EZ-SCREE System (Type ) -Channel EDM of IM-T-9A Interface Module -Channel EDM of IM-T-9A Interface Module 0V dc V dc 0V dc Page 69 EZ-SCREE Grid & Point with terminal chamber hookup ( with M/Euro QD, see WD00-WD006) EZ-SCREE Receiver PE dc Com V dc (ot Used) RESET 5 EDM 6 EDM 7 OSSD 8 OSSD 9 Reset EZ-SCREE Receiver PE dc Com V dc (ot Used) RESET 5 EDM 6 EDM 7 OSSD 8 OSSD 9 Reset IM-T-9A Terminal ocations S S Y Y IM-T-9A Machine Control S S IM-T-9A K S K S Y Y Y Y MPCE MPCE Machine Control S S IM-T-9A K S K S Y Y Y Y MPCE MPCE Y Y S S Arc Suppressors. See manual for specific warnings. Feedback (optional) Arc Suppressors. See manual for specific warnings. Feedback (optional) Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

9 HOOKUPS WIRIG DIAGRAMS REFERECE CHARTS GOSSARY ITERATIOA REPS WD0 EZ-SCREE AC Interface Box EZAC-R9-QE8 Hard-Wired with O and EDM REFERECE EZAC-R9-QE8 Page 76 -ch. -ch. EDM X X X X P P P P 5 P5 (Hand Wired) EZAC-R9-QE8 (ine) P5 00-0V ac (eutral) P5 / PT threads for outputs (Gnd) P5 Machine Control K K MPCE MPCE / PT threads for AC inputs 8-pin female to emitter/receiver -ch. -ch. (EDM) X X -Channel EDM Hookup Monitoring Contacts MPCE (EDM) X X MPCE -ch. -ch. (EDM) X X -Channel EDM Hookup Monitoring Contacts MPCE MPCE X (EDM) X X o EDM -ch. -ch. (EDM) X Arc Suppressors. See manual for specific warnings. (EDM) X X Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

10 WD0 EZ-SCREE AC Interface Box EZAC-R-QE8 Hard-Wired with O, C and EDM Accessories Reference Hookups Wiring Diagrams Glossary International Reps EZAC-R-QE8 Page 76 (Hand Wired) / PT threads for outputs / PT threads for AC inputs 8-pin female to emitter/receiver Arc Suppressors. See manual for specific warnings. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

11 HOOKUPS WIRIG DIAGRAMS REFERECE CHARTS GOSSARY ITERATIOA REPS WD05 EZ-SCREE System (Type ) EZAC-R5A-QE8-Q58-Mini-Style QD with O, SPDT and -Channel EDM REFERECE EZAC-R5A-QE8-QS8 Page 76 EZAC-R5A-QE8-QS8 (eutral) P5 (ine) P5 (Gnd) P5 Bu Bn Gn/Ye Machine Control 00-0V ac -Pin Mini-Style Power Connector Mating Cordset: QDS-..C Gnd/PE ine eutral 8-pin male for outputs -pin male for AC inputs (8-Pin Mini) 8-pin female to emitter/receiver Arc Suppressors. See manual for specific warnings. K K X (EDM) X X (EDM) X Gn/Ye Bk Bn Wh Vi Bu Or Or/Bk.O. (to load).o..o. (to load).c. Aux (see Warning).O. V dc (switched) EDM MPCE MPCE amp MPCE MPCE Monitoring Contacts 8-Pin Mini-Style Output Connector Orange/Black Orange Violet Black White Mating Cordset: QDS-8..C.O. Orange/Black V dc (EDM) Orange EDM White.O. (to load) 5 Black.O. (to load) 6 Common 7 Gnd/PE 8 Violet.C. Aux. WD06 EZ-SCREE AC Interface Box EZAC-R8-QE8-QS5 Mini-Style QD with O, C and Power Monitoring 78 EZAC-R8-QE8-QS5 5-pin male for outputs -pin male for AC inputs (5-Pin Mini) 8-pin female to emitter/receiver Page 76 EZAC-R8-QE8-QS5 (eutral) P5 (ine) P5 (Gnd) P5 K K X (EDM) X X (EDM) X 5 Bu Bn Gn/Ye Gn/Ye Wh Bk Bu Bn MPCE MPCE Monitoring Contacts.O. (b).o. (a).c. (b).c. (a) Machine Control 00-0V ac MPCE MPCE -Pin Mini-Style Power Connector Mating Cordset: QDS-..C Gnd/PE ine eutral 5-Pin Mini-Style Output Connector Black White Mating Cordset: QDS-5..C Black.O. (a).c. (a) Gnd/PE.C. (b) 5 White.O. (b) Arc Suppressors. See manual for specific warnings. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

12 WD07 EZ-SCREE AC Interface Box EZAC-R0-QE8-QS5 Mini-Style QD with O and Power Monitoring Accessories Reference Hookups Wiring Diagrams EZAC-R0-QE8-QS5 Page 76 EZAC-R0-QE8-QS5 (eutral) P5 (ine) P5 (Gnd) P5 Bu Bn Gn/Ye MPCE MPCE Monitoring Contacts Machine Control 00-0V ac -Pin Mini-Style Power Connector Mating Cordset: QDS-..C Gnd/PE ine eutral Glossary International Reps 5-pin male for outputs (5-Pin Mini) K K 5 Gn/Ye Wh Bk Bu.O. (b).o. (a).o. (b) MPCE MPCE 5-Pin Mini-Style Output Connector Black White Mating Cordset: QDS-5..C Black.O. (a).c. (a) Gnd/PE.C. (b) Bn.O. (a) 5 White.O. (b) -pin male for AC inputs 8-pin female to emitter/receiver Arc Suppressors. See manual for specific warnings. X (EDM) X X (EDM) X WD08 EZ-SCREE AC Interface Box EZAC-E-QE.. Hard-Wired Emitters with or without Test EZAC-E-QE8 EZAC-E-QE5 Page 76 EZAC-E-QE8 or EZAC-E-QE5 5-Pin Euro TEST function available only for model EZAC-E-QE5 (ine) (eutral) { (Gnd) TEST # TEST # 90-0V ac TEST / PT threads AC inputs 5-pin to emitter 8-Pin Euro / PT threads 8-pin AC inputs to emitter Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

13 HOOKUPS WIRIG DIAGRAMS REFERECE CHARTS GOSSARY ITERATIOA REPS WD09 EZAC-E-QE8-QS Mini-Style QD Emitter EZ-SCREE AC Interface Box EZAC-E-QE5-QS5 Mini-Style QD Emitter with Test REFERECE EZAC-E-QE8-QS EZAC-E-QE5-QS5 Page 76 EZAC-E-QE8-QS (ine) (eutral) (Gnd) 90-0V ac EZAC-E-QE5-QS5 (ine) (eutral) (Gnd) TEST # Black 90-0V ac TEST TEST # 5 White (-Pin Mini) -pin male AC inputs 8-pin to emitter (5-Pin Mini) -Pin Mini-Style Power Connector Mating Cordset: QDS-..C Gnd/PE ine eutral 5-Pin Mini-Style Output Connector Black White Mating Cordset: QDS-5..C Black.O. (a).c. (a) Gnd/PE.C. (b) 5 White.O. (b) 5-pin male AC inputs 5-pin to emitter WD00 AG aser Scanner AG to FSD & FSD V dc 0V dc AG Page 98 X AG 0V dc Restart (Reset) V dc FP Alarm 5 (Auxiliary ) 6 FP 7 FP 8 FP 9 Violet Orange Wht/Blk Fuse.6A 0 OSSD OSSD Black White Shield FSD FSD 786 Warning: Monitoring FSDs FSD s must be monitored for proper operation. -channel EDM can only be used when the scanner is configured for manual reset. See manual for more information. Alarm 5 (Auxiliary ) Figure shows Field Pair # selected. See manual for further information on Field Pair Switchover See manual for further information on the non-safety Alarm/Auxiliary outputs. Single-Channel Safety Stop Circuit Dual-Channel Safety Stop Circuit OTE: Do not exceed OSSD maximum load capacitance specification. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)