S18 Sensors ac-voltage Series
|
|
- Chloe Henderson
- 5 years ago
- Views:
Transcription
1 8 ensors ac-voltage eries elf-contained ac-operated sensors Features Featuring Z-BM technology for reliable sensing without the need for adjustments ompletely epoxy-encapsulated to provide superior durability; designed to meet rigorous P69K standards for use in 2 psi washdowns nnovative dual-indicator system takes the guesswork out of sensor performance monitoring 2 to 25V ac (3-wire hookup); PT solid-state switch output, maximum load 3 m Models P ensing Mode Range LD Output Model* Opposed Retroreflective Polarized Retroreflective Diffuse Fixed-Field 2 m (66') 2 m (79") mm 3 mm (2") 2 (") cutoff (2") cutoff mm cutoff nfrared 95 nm Visible Red 68 nm nfrared 88 nm 83 8W3R 8RW3R 8W3L 8RW3L 8W3LP 8RW3LP 8W3D 8RW3D 8W3DL 8RW3DL 8W3FF25 8RW3FF25 8W3FF5 8RW3FF5 8W3FF 8RW3FF * tandard 2 m (6.5') cable models are listed. 9 m (3') cable: add suffix W/3 (e.g., 83 W/3). 4-pin Micro-style QD models: add suffix Q (e.g., 83Q). model with a QD connector requires a mating cable. (ee page 7.) Use polarized models when shiny objects will be sensed. WR... ot To Be Used for Personnel Protection ever use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. These sensors do OT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. sensor failure or malfunction can cause either an energized or de-energized sensor output condition. onsult your current Banner afety Products catalog for safety products which meet OH, and standards for personnel protection. Printed in U /5 P/ 252
2 8 ensors ac-voltage eries Fixed-Field Mode Overview 8 eries self-contained fixed-field sensors are small, powerful, infrared diffuse mode sensors with far-limit cutoff (a type of background suppression). Their high excess gain and fixed-field technology allow them to detect objects of low reflectivity, while ignoring background surfaces. The cutoff distance is fixed. Backgrounds and background objects must always be placed beyond the cutoff distance. Fixed-Field ensing Theory of Operation The 8FF compares the reflections of its emitted light beam () from an object back to the sensor s two differently aimed detectors, R and R2 (see Figure ). f the near detector (R) light signal is stronger than the far detector (R2) light signal (see object, closer than the cutoff distance), the sensor responds to the object. f the far detector (R2) light signal is stronger than the near detector (R) light signal (see object B, beyond the cutoff distance), the sensor ignores the object. The cutoff distance for model 8FF sensors is fixed at 25, 5 or millimeters (", 2", or 4"). Objects lying beyond the cutoff distance usually are ignored, even if they are highly reflective. However, it is possible to falsely detect a background object, under certain conditions (see Background Reflectivity and Placement). n the drawings and discussion on these pages, the letters, R, and R2 identify how the sensor s three optical elements (mitter, ear Detector R, and Far Detector R2 ) line up across the face of the sensor. The location of these elements defines the sensing axis (see Figure 2). The sensing axis becomes important in certain situations, such as those illustrated in Figures 5 and 6. ear Detector Far Detector mitter Receiver lements R R2 Lenses Object ensing Range Object is sensed if amount of light at R is greater than the amount of light at R2 Figure. Fixed-field concept utoff Distance Object B or Background ensor etup ensing Reliability For highest sensitivity, position the target object for sensing at or near the point of maximum excess gain. The excess gain curves for these products are shown on page 5. Maximum excess gain for the 2 models occurs at a lens-to-object distance of about 7 mm; for models, at about mm; and for the mm models, at about 2 mm. ensing at or near this distance will make maximum use of each sensor s available sensing power. The background must be placed beyond the cutoff distance. (ote that the reflectivity of the background surface also may affect the cutoff distance.) Following these two guidelines will improve sensing reliability. Background Reflectivity and Placement void mirror-like backgrounds that produce specular reflections. False sensor response will occur if a background surface reflects the sensor s light more strongly to the near detector, or sensing detector (R) than to the far detector, or cutoff detector (R2). The result is a false O condition (Figure 3). To cure this problem, use a diffusely reflective (matte) background, or angle either the sensor or the background (in any plane) so the background does not reflect light back to the sensor (see Figure 4). Position the background as far beyond the cutoff distance as possible. n object beyond the cutoff distance, either stationary (and when positioned as shown in Figure 5), or moving past the face of the sensor in a direction perpendicular to the sensing axis, can cause unwanted triggering of the sensor if more light is reflected to the near detector than to the far detector. The problem is easily remedied by rotating the sensor 9 (Figure 6). The object then reflects the R and R2 fields equally, resulting in no false triggering. better solution, if possible, may be to reposition the object or the sensor. s a general rule, the most reliable sensing of an object approaching from the side occurs when the line of approach is parallel to the sensing axis. Figure 2. Fixed-field sensing axis 2 P/ 252 Banner ngineering orp. Minneapolis, M U... Tel:
3 8 ensors ac-voltage eries olor ensitivity The effects of object reflectivity on cutoff distance, though small, may be important for some applications. t is expected that at any given cutoff setting, the actual cutoff distance for lower reflectance targets will be slightly shorter than for higher reflectance targets (see Figure-of-Merit information on page 5). This behavior is known as color sensitivity. For example, an excess gain of (see page 5) for an object that reflects / as much light as the 9% white card is represented by the horizontal graph line at excess gain =. n object of this reflectivity results in a far limit cutoff of approximately 2 mm (.8"), for the 2 (") cutoff model for example; thus 2 mm represents the cutoff for this sensor and target. These excess gain curves were generated using a white test card of 9% reflectance. Objects with reflectivity of less than 9% reflect less light back to the sensor, and thus require proportionately more excess gain in order to be sensed with the same reliability as more reflective objects. When sensing an object of very low reflectivity, it may be especially important to sense it at or near the distance of maximum excess gain. Fixed ensing Field utoff Distance Reflective Background ore of mitted Beam trong Direct Reflection to R 8FF R R2 R = ear Detector R2 = Far Detector = mitter ore of mitted Beam trong Direct Reflection way From ensor Figure 3. Reflective background problem Figure 4. Reflective background solution 8FF utoff Distance R R2 R = ear Detector R2 = Far Detector = mitter Fixed ensing Field Reflective Background or Moving Object reflective background object in this position or moving across the sensor face in this axis and direction may cause false sensor response. Figure 5. Object beyond cutoff problem reflective background object in this position or moving across the sensor face in this axis will be ignored. Figure 6. Object beyond cutoff solution Banner ngineering orp. Minneapolis, M U... Tel: P/ 252 3
4 8 ensors ac-voltage eries upply Voltage and urrent upply Protection ircuitry Output onfiguration 2 to 25V ac (5/6 Hz) verage current: 2 m Peak current: 2 2V ac, 5 2V ac, 75 25V ac Protected against transient voltages PT solid-state ac switch; three-wire hookup; light operate or dark operate, depending on model Light Operate: Output conducts when sensor sees its own (or the emitter s) modulated light Dark Operate: Output conducts when the sensor sees dark Output Rating 3 m maximum (continuous) Fixed-Field models: derate 5 m/ above +5 (+22 F) nrush capability: amp for 2 milliseconds, non-repetitive OFF-state leakage current: < microamps O-state saturation voltage: 3 m ac; 5 m ac Output Protection ircuitry Output Response Time Repeatability ndicators onstruction nvironmental Rating Protected against false pulse on power-up Opposed mode: 6 milliseconds O, 8 milliseconds OFF Other models: 6 milliseconds O and OFF OT: millisecond delay on power-up; outputs do not conduct during this time. Opposed mode: 2 milliseconds Other models: 4 milliseconds Repeatability and response are independent of signal strength. Two LDs (reen and Yellow) reen O steady: power to sensor is O Yellow O steady: sensor sees light Yellow flashing: excess gain marginal ( to.5x) in light condition PBT polyester housing; polycarbonate (opposed-mode) or acrylic lens Leakproof design rated M 6P, D 45 (P69K) onnections 2 m (6.5') attached cable or 4-pin Micro-style quick-disconnect fitting Operating onditions Temperature: -4 to +7 (-4 to +58 F) Maximum relative humidity: 9% at 5 (non-condensing) Vibration and Mechanical hock ertifications pecifications ll models meet Mil. td. 22F requirements. Method 2 (Vibration; frequency to 6 Hz, max., double amplitude.6" acceleration ). Method 23B conditions H& (hock: 75 with unit operating; for non-operation) 4 P/ 252 Banner ngineering orp. Minneapolis, M U... Tel:
5 8 ensors ac-voltage eries Performance urves xcess ain Beam Pattern xcess ain Performance based on use of a 9% reflectance white test card. Opposed. m (.33') m (3.3') 8 eries DT Opposed Mode m (33') m (33') mm mm 8 eries Opposed Mode 5 m (6') m (32') 5 m (49') DT 2 m (66') 25 m (82') 6" 4" 2" 2" 4" 6" Fixed-Field 2. mm (.4") mm (.4") 8 eries DT Fixed-field mode with 2 far limit cutoff mm (.4") mm Ø mm spot 8 mm focus Ø mm spot 2 cutoff Using 8% gray test card: utoff distance will be 95% of value shown. Using 6% black test card: utoff distance will be 9% of value shown. Retroreflective. m (.33'). m (.33') 8 eries DT on-polarized Retro m (3.3') m (33') 2 mm 8 mm 4 mm 4 mm 8 mm 2 mm 8 eries on-polarized Retro.5 m (.6'). m (3.2').5 m (4.8') DT 2. m (6.4') 2.5 m (8.') 4.7" 3.2".6".6" 3.2" 4.7" Fixed-Field. mm (.4") mm (.4") 8 eries DT Fixed-field mode with far limit cutoff mm (.4") mm Ø mm spot mm focus Ø mm spot cutoff Using 8% gray test card: utoff distance will be 9% of value shown. Using 6% black test card: utoff distance will be 85% of value shown. Polarized Retro. m (.33'). m (.33') 8 eries DT Polarized Retro m (3.3') m (33') mm mm 8 eries Polarized Retro.5 m (.6'). m (3.2').5 m (4.8') DT 2. m (6.4') 6" 4" 2" 2" 4" 6" 2.5 m (8.') Fixed-Field mm. mm (.4") mm (.4") 8 eries DT Fixed-field mode with mm far limit cutoff mm (.4") mm Ø mm spot 2 mm focus Ø mm spot mm cutoff Using 8% gray test card: utoff distance will be 85% of value shown. Using 6% black test card: utoff distance will be 75% of value shown. Diffuse mm mm (.4") Minimum ain mm (.4") 8 eries DT hort Range Diffuse Mode Maximum ain mm mm mm mm 8 eries hort Range Diffuse 2 (") (2") 7 (3") DT mm 2 (5").6".4".2".2".4".6" Focus and spot sizes are typical. Diffuse 3 mm mm (.4") Maximum ain Minimum ain mm (.4") 8 eries DT Long Range Diffuse Mode mm mm mm mm 8 eries Long Range Diffuse 8 mm (3") 6 mm (6") 24 mm (9") DT 32 mm (2") 4 mm (5") Performance based on use of a model BRT-3 retroreflector (3" diameter). ctual sensing range may be more or less than specified, depending on the efficiency and reflective area of the retroreflector used..6".4".2".2".4".6" Banner ngineering orp. Minneapolis, M U... Tel: P/ 252 5
6 8 ensors ac-voltage eries Yellow LD Output ndicator reen LD Power ndicator abled Models Dimensions Yellow LD Output ndicator reen LD Power ndicator QD Models 85.3 mm* (3.36") 63.2 mm (2.49") 4. mm* (4.") 63.2 mm (2.49") *Polarized retro and fixed-field models = 86.3 mm (3.4") *Polarized retro and fixed-field models = 5. mm (4.4") Hookups abled mitters QD mitters (4-pin Micro-tyle) bn bu 2-25V ac rd/bk rd/wh rd gn 2-25V ac o connection ll Other abled Models ll Other QD Models (4-pin Micro-tyle) bn bu bk Load 2-25V ac rd/bk rd/wh rd Load gn 2-25V ac o onnection 6 P/ 252 Banner ngineering orp. Minneapolis, M U... Tel:
7 8 ensors ac-voltage eries Quick-Disconnect (QD) ables tyle Model Length Dimensions Pinout 4-pin Micro-style traight MQ-46 MQ-45 MQ-43 2 m (6.5') 5 m (5') 9 m (3') 44 mm max. (.7") ø (.6") ø /2-2UF-2B Red Wire reen Wire 38 mm max. (.5") Red/White Wire Red/Black Wire 4-pin Micro-style Right-angle MQ-46R MQ-45R MQ-43R 2 m (6.5') 5 m (5') 9 m (3') 38 mm max. (.5") /2-2UF-2B ø (.6") WRRTY: Banner ngineering orp. warrants its products to be free from defects for one year. Banner ngineering orp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied. P/ 252 Banner ngineering orp., 974 Tenth ve. o., Minneapolis, M U 5544 Phone: mail: sensors@bannerengineering.com
S30 Sensors dc-voltage Series
elf-contained dc-operated sensors Features Featuring Z-BM technology for reliable sensing without the need for adjustments 3 mm plastic threaded barrel sensor in opposed, retroreflective or fixed-field
More informationS18 Sensors dc-voltage Series
8 ensors dc-voltage eries elf-contained dc-operated sensors Features Featuring Z-BM technology for reliable sensing without the need for adjustments ompletely epoxy-encapsulated to provide superior durability,
More informationT30 Sensors dc-voltage Series
T3 ensors dc-voltage eries elf-contained dc-operated sensors Models Features Featuring Z-BM technology, the specially designed optics and electronics provide reliable sensing without the need for adjustments
More informationT30 Sensors - AC-Voltage Series
T3 ensors - -Voltage eries elf-ontained, -Operated ensors Featuring Z-BM technology, the specially designed optics and electronics provide reliable sensing without the need for adjustments T style plastic
More information20 m (65.6 ft) Infrared, 950 nm. Q25RW3LP 2 m (6.6 ft) Visible red, 680 nm. Q25RW3FF mm (3.9 in) cutoff
Q25 ensors nstruction Manual elf-ontained, -Operated ensors Featuring Z-BM technology for reliable sensing without the need for adjustments Rectangular 25 mm plastic housing with 8 mm threaded mounting
More informationWORLD-BEAM QS30 Universal Voltage
WORLD-BM Q3 Universal Voltage elf-contained photoelectric sensors in universal-style housing Features U dvanced one-piece photoelectric sensors with exceptional long-range optical performance ompact housing
More informationT30 Sensors AC-Voltage Series
T3 ensors -Voltage eries nstruction Manual elf-ontained, -Operated ensors Featuring Z-BM technology, specially designed optics and electronics provide reliable sensing without adjustments T style PBT polyester
More informationS18 Series Sensors (DC Voltage)
8 eries ensors (D Voltage) Datasheet Featuring Z-BM technology for reliable sensing without the need for adjustments ompletely epoxy-encapsulated to provide superior durability, designed to meet rigorous
More informationS30 Sensors DC-Voltage Series
3 ensors D-Voltage eries nstruction Manual elf-ontained, D-Operated ensors Featuring Z-BM technology for reliable sensing without the need for adjustments 3 mm plastic threaded barrel sensor in opposed,
More informationT30 Sensors - DC-Voltage Series
T3 ensors - D-Voltage eries elf-ontained, D-Operated ensors Featuring Z-BM technology, the specially designed optics and electronics provide reliable sensing without the need for adjustments T style plastic
More informationø 18.0 mm Models LO S183EQ1 Emitter
8 ensors ø 8. mm OL UTOD, TP, G & PDF Photoelectrics ensors ensors pecial Purpose ensors Measurement & nspection ensors Vision Wireless 85. mm Opposed, on-polarized Retroreflective and ls uffix, R, L and
More informationM12 Series Metal Barrel Sensors
eries Metal Barrel ensors Rugged, self-contained sensors in a 2 mm threaded barrel Features omplete family of sensors, all housed in a compact 2 mm threaded metal barrel Opposed, retroreflective, polarized
More informationT30 DC-Operated Long-Range with Superior Durability
PHOTOLTR FTURD RTGL RGHT GL BRRL D-Operated Long-Range with uperior Durability poxy-encapsulated sensors provide reliable sensing without adjustments. Features 3 mm plastic threaded barrel vailable in
More information20 m (65.6 ft) Infrared, 950 nm
Q25 D ensors nstruction Manual elf-ontained, D-Operated ensors Featuring Z-BM technology for reliable sensing without the need for adjustments Rectangular 25 mm plastic housing with 8 mm threaded mounting
More informationT18 Series Sensors (AC Voltage)
Sensors (AC Voltage) Instruction Manual Featuring Z-BAM technology for reliable sensing without the need for adjustments (most models) T style plastic housing with 8 mm threaded lens mount Models available
More informationDISTANCE Q85BB62R DISTANCE
Q8 ensors ompact Photoelectric ensors with Universal Voltage and Wiring hamber Features conomical photoelectric sensors in NM-6P ( P67) B housing ignal (D ystem) and Output indicator LDs Wiring chamber
More informationQ85 Sensors. Output Timing. Q853E Effective Beam: 9.6 mm Q85VR3R. SPDT E/m Relay E X C E S S. Yes G A I N. Yes. Yes
Q8 ensors ompact Photoelectric ensors with Universal Voltage and Wiring hamber Features conomical photoelectric sensors in NM-6P ( P67) B housing ignal (D ystem) and Output indicator LDs Wiring chamber
More informationø 40 mm Opposed, Polarized Retroreflective and Fixed-field Models Suffix E, R, LP and FF Models NPN
OR MTUR OMPT MDZ FULLZ T Right-ngle Barrel-Mount ensors Features Z-BM technology, with specially designed optics and electronics for reliable sensing without adjustments Features T-style plastic housing
More informationWORLD-BEAM QS30 Series Sensor (DC Voltage)
WORLD-BM Q3 eries ensor (D Voltage) nstruction Manual ompact, self-contained photoelectric sensors in universal-style housing dvanced one-piece photoelectric sensors with exceptional long-range optical
More informationWORLD-BEAM QS18 Adjustable-Field Sensors
DJUTBL-FLD (some models) WORLD-BM Q8 djustable- ensors Miniature sensors with visible red LD or visible red laser Models Features xceptional optical performance, comparable to larger sensors imple multi-turn
More informationSL Series Slot Sensor
Self-contained opposed-mode sensor pair Features An easy-to-use self-contained opposed-mode sensor pair in a rugged U-shaped housing Easy and economical to mount Molded-in beam guides simplify mounting
More informationPicoDot. Supply Voltage. Output Type NPN V dc PNP
PicoDot Polarized Retroreflective Laser ensors PicoDot Features Compact and lightweight. Class 2 laser diode light source. Brings high power and small effective beam to retroreflective sensing applications.
More informationWORLD-BEAM QS30 Series
WORLD-BEAM QS30 Series High-power opposed-mode sensors Features Infrared beam with high excess gain range over 213 m (700') Excellent noise immunity and crosstalk avoidance Excellent optical performance
More informationQ60AFV Series Sensors with Visible Red Emitter
Datasheet Self-Contained Adjustable-Field Sensors Adjustable-field background suppression sensor detects objects within a defined sensing field, while ignoring objects located beyond the sensing field
More informationQL50 Luminescence Sensor
Compact, self-contained luminescence sensor LISTED US Compact, self-contained design Features Senses luminescent marks, even on luminescent backgrounds and on reflective surfaces, such as ceramic, metal,
More informationWORLD-BEAM QS30 Adjustable-Field Sensors
with Background Suppression Midsize sensors featuring extended range and background suppression mode Features Bipolar discrete outputs, PNP and NPN 128 element photo receiver for superior performance on
More informationWORLD-BEAM QS30AF Sensor
WORLD-BEAM QS30AF Sensor Push-Button-SE Adjustable-Field Sensor Features Push-button adjustable-field background suppression sensor detects objects within a defined sensing field, while ignoring objects
More informationU-GAGE Q45U Long-Range Ultrasonic Sensors
U-GAGE Q45U Long-Range Ultrasonic Sensors Piezoelectric Proximity Mode Sensors with Push Button Programming of Sensing Window Limits Bipolar Discrete Outputs Features Analog models also available Models
More informationWORLD-BEAM QS18AFF200 Sensors with Foreground Suppression
WORLD-BEAM QS8AFF00 Sensors with Foreground Suppression Datasheet Compact sensors featuring extended range and foreground suppression mode Exceptional optical performance; up to 00 mm sensing range in
More informationMULTI-BEAM LS10 Light Screen System
For Sensing Small Parts at High Speeds Emitter and receiver pair produce a strobed array of modulated light beams to produce a light screen Simple, economical and highly reliable means of sensing small
More informationLX Series Part-Sensing Light Screen
Datasheet For Sensing Small or Flat Parts at High Speeds Emitter and receiver pair produce a strobed web of modulated light beams, in 8 lengths, 2 sensing ranges Simple, economical and highly reliable
More informationPNP. 5 to 800 mm sensor to reflector distance on BRT-60x40C NPN
Datasheet Coaxial polarized retroreflective sensor for clear object detection Reliable detection of clear, translucent, or opaque objects including PET and glass containers, transparent films, and mirror-like
More informationWORLD-BEAM QS18AF Sensor with Background Suppression
WORLD-BEAM QS8AF Sensor with Background Suppression Datasheet Compact sensors featuring extended range and background suppression mode Exceptional optical performance; up to 00 mm sensing range in compact
More informationPICO-AMP Miniature Remote Sensing System
PICO-AMP Miniature Remote Sensing System MD14 Modulated Amplifer and Ultra-small Remote Sensors PICO-AMP Features Ultra-small remote sensors to fit the tightest locations Three fixed frequency selections
More informationQL55 Series Luminescence Sensor
Self-contained, microprocessor-based luminescence sensor Features Self-contained design in a robust, compact metal housing High sensitivity Microprocessor-controlled Senses luminescent marks, even on luminescent
More informationMINI-BEAM Clear Plastic Detection Sensors
Datasheet AC-operated or DC-operated Sensors for Clear Plastic Detection Senses the presence of clear plastic materials while ignoring all other materials A highly reliable, cost-saving alternative to
More informationR-GAGE QT50R Retroreflective* Sensor
R-GAGE QT5R Retroreflective* Sensor Radar-Based Retroreflective Sensors for Detection of Moving and Stationary Targets Features FMCW (true-presence) radar detects moving and stationary objects Retro-wave
More informationSmall Object Counter page 227 page 228 page 228 page 258
OR FBR OR PLT FBR L FBR D eries Redefining High-Performance ensing Features advanced fiber optic amplifier for use with plastic fibers vailable in bipolar, discrete and analog/discrete output models vailable
More informationD10 Expert with Discrete Output and Bargraph Display
D xpert with Discrete Output and Bargraph Display dvanced sens f use with plastic fiber optics tandard Model tack of Models with Bussable Power Feature Features asy-to-read -segment light bar indicat f
More informationM12 Class 1 Laser Emitter
IEC Class 1 Laser for use with Banner modulated receivers CAUTION... Never stare directly into the emitter lens. Laser light can damage your eyes. Avoid placing any mirror-like object in the beam. Never
More informationWORLD-BEAM QS18 Mechanically Adjustable Background Suppression Sensors
WORLD-BM Q8 Mechanically djustable Background uppression ensors Datasheet Miniature sensors with visible red LD or visible red laser xceptional optical performance, comparable to larger sensors imple multi-turn
More informationWORLD BEAM QS30H2O Series
WORLD BEAM QS0HO Series High-Power Water Sensor Features Special emitter/receiver infrared wavelength tuned to the absorption band of water Powerful enough to burn through many types of plastic and glass
More informationSLE30 Expert Series Teach-Mode Slot Sensor
SLE30 Expert Series Teach-Mode Slot Sensor Self-contained opposed-mode sensor pair with Teach Mode SLE30 Expert Series Slot Sensor Features An easy-to-use, self-contained opposed-mode sensor pair in a
More informationM18-3 Nickel-Plated Brass 18 mm Barrel Sensors
M8- Nickel-Plated Brass 8 mm Barrel Sensors Datasheet Next generation of self-contained dc-operated sensors Complete family of sensors, all housed in the popular 8 mm threaded metal barrel Economical photoelectric
More informationSLE30 Expert Series Slot Sensor
Datasheet Self-Contained Opposed-Mode Sensor Pair with each Mode An easy-to-use, self-contained opposed-mode sensor pair in a rugged U-shaped housing Easy push-button programming automatically adjusts
More informationR55F Series Fiber-Optic Color Mark Sensors
For Plastic and Glass Fiber Optics R55F Series Sensor Features Outstanding color contrast sensitivity; detects 16 levels of gray scale. Depending on beam color, reliably detects the toughest color mark
More informationR55 Color Mark Sensor
SWITCH POINT R55 Color Mark Sensor Color Registration Mark Sensor with Solid-State White Light Source R55 Features Outstanding color contrast sensitivity; detects 16 gray scale changes Reliably detects
More informationNew industry standard sensor
48 Low cost/mall type series New industry standard sensor Longest sensing distance in class at 2 m * ignificantly reduced dead zone Indicators visible from any angle *Red LD type, with through-beam type
More informationQ45BB6LL Laser Diode Retroreflective Sensors
Q456LL Laser Diode Retroreflective Sensors Datasheet Very-Long-Range Retroreflective Sensors for 10 V to 30 V dc High power and small effective beam for retroreflective sensing applications lass II laser
More informationMULTI-BEAM Sensors. Compact modular self-contained photoelectric sensing controls
MULT-BM ensors ompact modular self-contained photoelectric sensing controls.6" (4 mm) tatus ndicator LD (except emitters) ccess to ensitivity djustment." (5 mm) Lens enterline 4.5" (4 mm).6" (6. mm).7"
More informationWORLD-BEAM QS30H2O Series
High-Power Water Sensor For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.com Features Models QS30EXHO QS30ARHO QS30RRHO
More informationU-GAGE T30UX Series with Discrete Output
U-GAGE T3UX Series with Discrete Output Ultrasonic Sensor with TEACH-Mode Configuration 1, 2 and 3 m (3.28, 6.56, and 9.84 ft) versions with short dead zones (1% of max range) Built-in temperature compensation
More informationQ4X Stainless Steel Laser Sensor
Quick Start Guide Class 1 laser CMOS sensor with a bipolar (1 PNP and 1 NPN) output. Patent pending. This guide is designed to help you set up and install the Q4X Sensor. For complete information on programming,
More informationUS18-PL-5-N03 Ultrasonic Sensors
US18-PL-5-N03 Ultrasonic Sensors Miniature Ultrasonic Sensors with EACH-Mode Programming Fast, easy-to-use EACH-Mode programming; no potentiometer adjustments Ultra-compact housing One discrete output:
More informationSpecifications. Environmental. Operating Temperature [C (F)] for TRIAC output ( ) for all others
Specifications Environmental Line Line Green Line Analog ertifications UL Listed, SA Approved, and E Marked for all applicable directives Features S Wide selection for increased application flexibility
More informationLED Series Sealed High-Intensity Area Lights
Datasheet High-Power Lighting for use with Banner Vision Systems To view or download the latest technical information about this product, including specifications, dimensions, accessories, and wiring,
More informationDF-G1 Expert Dual Display Fiber Amplifier
Installation Guide Advanced sensor with dual digital displays for use with plastic and glass fiber optic assemblies. For complete technical information about this product, including dimensions, accessories,
More informationR58E. Register Mark Sensors. the R58 BR 2
Register Mark Sensors Provides excellent color contrast sensitivity detecting 16 levels of gray scale Optimizes application contrast by automatically chooseing red, green or blue sensing LEDs R58E http://www.e-sensors.com.tw
More informationR-GAGE QT50RAF Sensor
Radar-Based Adjustable Field Sensors for Detection of Moving and Stationary Targets Features FMCW (true-presence) radar detects moving and stationary objects Adjustable sensing field ignores objects beyond
More informationCompact Photoelectric Sensor
CX-00 Photoelectric s Compact Photoelectric The CX-00 series of photoelectric sensors is a wide-ranging lineup of 116 different models. Whatever your application entails, SUNX has covered it with this
More informationSureCross Wireless Q45 Sensor - Glass Fiber
urecross Wireless Q45 ensor - Glass Fiber urecross Wireless Q45 ensors combine the best of Banner s flexible Q45 sensor family with its reliable, field-proven, urecross wireless architecture to solve new
More informationFEATURES. 15 m ft. 4 m ft. 2 m ft. 100 mm in. 600 mm in. 15 m ft. 4 m ft. 2 m ft. 100 mm 3.
273 Cylindrical Photoelectric Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO PHOTO MEASURE -LS200
More informationSpecifications. Environmental. Operating Temperature [C (F)] for TRIAC output ( ) for all others
Specifications Environmental Line Line Green Line Analog ertifications UL Listed, SA Approved, and E Marked for all applicable directives Features S Wide selection for increased application flexibility
More informationR-GAGE QT50RAF Sensor
Datasheet Radar-Based Adjustable Field Sensors for Detection of Moving and Stationary Targets FMCW (true-presence) radar detects moving and stationary objects Adjustable sensing field ignores objects beyond
More informationBackground Suppression with Photoelectric Sensors Challenges and Solutions
Background Suppression with Photoelectric Sensors Challenges and Solutions Gary Frigyes, Product Manager Ed Myers, Product Manager Jeff Allison, Product Manager Pepperl+Fuchs Twinsburg, OH www.am.pepperl-fuchs.com
More informationMULTI-BEAM Sensors. Compact modular self-contained photoelectric sensing controls
MULT-BAM ensors ompact modular self-contained photoelectric sensing controls.6" (4 mm) tatus ndicator LD (except emitters) Access to ensitivity Adjustment 2." (53 mm) Lens enterline 4.5" (4 mm) 2.36" (6.
More informationWLS28-2 LED Strip Light - PWM Dimmable
WLS8- LED Strip Light - PWM Dimmable Datasheet Banner s LED Strip Lights have sturdy aluminum housings, shatterproof windows, and impressive environmental ratings, making them an ideal general-purpose
More informationA-GAGE MINI-ARRAY. Two-Piece Measuring Light Screen. Instruction Manual. Features
Features Simple two-piece measuring light screen for inspection, profiling, and object detection, tailored for vehicle separation applications. Detects single-fault emitter, receiver and dirty lens conditions;
More informationL-GAGE LT3BD Long-Range Time-of-Flight Laser Sensor
L-GAGE L3BD Long-Range ime-of-flight Laser Sensor Datasheet Extremely long range: 5 m with white targets or 3 m with gray targets for diffuse mode sensors, up to 50 m for retroreflective models wo discrete
More informationR-GAGE QT50R-AFH Sensor
Radar-Based Sensors for Detection of Moving and Stationary Targets Features Fourth generation FMCW (true-presence) radar detects moving and stationary objects Higher sensitivity and longer range Adjustable
More informationSureCross DX80 FlexPower EZ-LIGHT Node with Integrated Battery
SureCross DX80 FlexPower EZ-LIGHT Node with Integrated Battery Node with an integrated battery for the EZ-LIGHT family 900 MHz, Internal battery model Features The SureCross DX80 is a radio frequency network
More informationR-GAGE QT50R-RH Sensor
Datasheet Radar-Based Retroreflective Sensors for Detection of Moving and Stationary Targets FMCW (true-presence) radar detects moving and stationary objects Retro-wave sensor - use of a reference signal
More informationL-GAGE Laser Gauging Sensor 75 to 125 mm Range
SIGNL SPEE L-GGE Laser Gauging Sensor 75 to 125 mm Range Class 2 visible laser displacement sensor with both analog and discrete (switched) outputs L-GGE LG10 Series Laser Gauging Sensor Features Self-contained
More informationL-GAGE LT3 SENSORS. LT3 Sensing Ranges QPMA LIGHT GAUGING ULTRASONIC MEASURING ARRAYS RADAR. More information online at bannerengineering.
SENSORS LIGHT GAUGING ULTRASONIC MEASURING ARRAYS RADAR L-GAGE LT Distance-Gauging Uses advanced time-of-flight technology for precise, long-distance gauging at the speed of light Available in diffuse-mode
More informationWLS28-2 UV LED Strip Light
WLS8- UV LED Strip Light Datasheet Banner's WLS8- UV LED Strip Lights have sturdy aluminum housings, shatterproof windows, and impressive environmental ratings, making them a cost-effective operator inspection
More informationEX-40 SERIES. Convergent Reflective Photoelectric Sensor. Reliable object detection in limited area. Stable convergent distance sensing
313 PHOTO PHOTO Convergent Reflective Photoelectric EX-4 SERIES Related Information General terms and conditions... F-3 Glossary of terms / General precautions...p.1549~ / P.1552~ guide... P.231~ Korea
More informationMICRO-AMP System. MA3 and MA3P Modulated Amplifiers. Model MA3P: PNP (current sourcing) output. Hookup Diagram, MA3 Amplifier
MCRO-AMP ystem MA3 and MA3P Modulated Amplifiers Banner MCRO-AMP modules MA3 and MA3P are modulated amplifiers designed for use with the miniature P00 eries remote sensors. Miniature photoelectric sensors,
More informationUltramini clever reliability in confined quarters. Simple installation and operation
Series OU Ultramini clever reliability in confined quarters m Through-beam sensors OUS/OUE up to, m Retro-reflective sensors OUR up to, m Retro-reflective sensors with polarizing filters OUP and OUC up
More informationOperating instructions Diffuse reflection sensor with background suppression. OJ51xx laser / / 2010
Operating instructions Diffuse reflection sensor with background suppression OJ51xx laser 704811 / 00 05 / 2010 Contents 1 Preliminary note3 1.1 Symbols used 3 2 Safety instructions 3 3 Functions and features
More informationAUTOCAD, STEP, IGES & PDF. OTC Series Field Cover mm. Upper Housing Connection Models NPN Models PNP
OTB/LTB OPTO-TOUCH Optical Touch Buttons Ergonomically designed touch buttons eliminate hand, wrist and arm stress. Zero-force touch buttons provide an alternative to capacitive touch switches and mechanical
More information44.5 mm mm. Long-range Models. 2 m. 5-pin Mini QD. Q45UBB63DAQ6 20, 40, 160 or 640 ms Q45UBB63DAC Yes. 5-pin Euro QD.
SENSORS ACCESSORIES LIGHT GAUGING ULTRASONIC MEASURING ARRAYS RADAR U-GAGE QU Flexible Ultrasonic Push-button TEACH programming makes it easy to set the near/far limits of the sensing window. Available
More informationCylindrical Photoelectric Sensor
SERIES Cylindrical Photoelectric Amplifier Built-in Cylindrical type easily mountable with M Conforming to EMC Directive AC supply type conforms to Low Voltage Directive, too. ( ) UL Recognition M This
More informationInstallation Instructions PHOTOSWITCH Series 9000 On/Off and Timing Photoelectric Sensors
Installation Instructions PHOTOSWITCH Series 9000 On/Off and Timing Photoelectric Sensors All Sensors Retroreflective Polarized Retroreflective ClearSight TM Standard Diffuse Long Range Diffuse Extended
More informationMLV40 Series Miniature Sensors
MLV4 Series Miniature Sensors Diffuse Mode See page 54 Features: Adjustable sensitivity Complementary outputs Sensing Range: 5 mm Outputs: NPN, PNP Thru-Beam Mode See page 57 Rugged metal housing Compact
More information2 Registration Mark Photoelectric Sensors
SMARTEYE COLORMARK II 2 Registration Mark Photoelectric Sensors Contrast Sensor for Registration Marks www.ttco.com 800-237-0946 2-155 Registration Mark Photoelectric Sensors 2 SMARTEYE COLORMARK II Registration
More informationPSW-002. Fiber Optic Polarization Switch. User Guide
PSW-002 Fiber Optic Polarization Switch User Guide Version: 1.0 Date: May 30, 2014 General Photonics, Incorporated is located in Chino California. For more information visit the company's website at: www.generalphotonics.com
More informationInstallation Instructions PHOTOSWITCH Series 9000 On/Off and Timing Photoelectric Sensors
Installation Instructions PHOTOSWITCH Series 9000 On/Off and Timing Photoelectric Sensors Polarized Transmitted Beam Fiber Optic All Sensors Retroreflective Retroreflective ClearSight TM Standard Diffuse
More informationEasy to replace. A pigtailed type sensor with connector (CY- -J), which is easy to replace, is also available. Environment resistant
EQ- VF NX PM PM MS-AJ RT-6 PX- PHOTOELECTRIC SENSORS Mounting Stand SERIES Cylindrical Photoelectric Test input PNP output Light intensity type available monitor M This sensor has an M size for convenient
More informationNA DigiParts GmbH. Small / Slim Object Detection Area Sensor
953 PHOTO PHOTO MEASURE ITY Object Area Sensor General terms and conditions... F-7 Related Information Glossary of terms... P.1455~ Cross-beam scanning system to detect slim objects Letters or business
More informationWLB32 Z C 285 PB QM B. Blank = Standard Diffuse E = Eye Shield Diffuse IP50. Family Voltage Color Cascadable WLB92 Z C 550 A CT. Lighted Length (mm)
Lighting Solutions WLB32 LED Light Bar Family Voltage Window Control Plug Type (AC Models) WLB32 Z C 285 PB QM B Z = AC DC C = 285 570 850 1130 Standard Diffuse E = Eye Shield Diffuse IP50 PB = Hi/ Low/OFF
More informationSensing method Appearance Sensing distance Operation mode Model. Emitter E3S-2LE4 Through-beam *1. 2 m. 0.1 to 2 m. 300 mm. 2 m
Photoelectric Sensor with Built-in Amplifier CSM DS_E 1 General-purpose Photoelectric Sensor for High Quality and Reliable Detection Be sure to read Safety Precautions on page 8. Ordering Information General-purpose
More informationNA1-11. Small / Slim Object Detection Area Sensor. Cross-beam scanning system to detect slim objects. Letters or business cards detectable!
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
More informationAnalog Laser Sensor. Installation Instructions. Specifications. Summary of Changes. Description. Catalog Numbers 45BPD-8LTB1-D5, 45BPD-8LTB2-D5
Installation Instructions Original Instructions Analog Laser Sensor Catalog Numbers 45BPD-8LTB1-D5, 45BPD-8LTB2-D5 Topic IMPORTANT Summary of Changes This manual contains an update to the sensing beam
More informationUltra-slim Body Picking Sensor NA1-PK5 SERIES NA1-5 SERIES. Even a slim hand is detectable by the 25 mm in pitch beam area sensor
473 PHOTO PHOTO Ultra-slim Sensor NA-PK5 SERIES SERIES General terms and conditions... F-7 Sensor selection guide... P.4~ Related Information Glossary of terms... P.455~ General precautions... P.458~ Conforming
More informationin one housing (3). The light beam is reflected by a reflector (4). The objects are detected by interruption of the light beam.
This info card serves as a supplement to the main position sensors catalogue and to the individual data sheets. For further information and contact addresses please visit our homepage at www.ifm. com.
More informationTriple Beam Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in
377 PHOTO PHOTO USE MEASUREMENT STATIC CONTROL Triple Beam Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-17 Glossary of terms... P.1359~ selection
More informationMICRO-AMP System. Product Line Specifications. Remote sensors, modulated amplifiers, and logic modules
MRO-AMP ystem Remote sensors, modulated amplifiers, and logic modules Product ine pecifications A versatile system of compact, high-performance remote sensors modulated amplifiers, and logic modules Remote
More informationUltra-slim Body Picking Sensor NA1-PK5 SERIES NA1-5 SERIES. Even a slim hand is detectable by the 25 mm in pitch beam area sensor
487 Ultra-slim Sensor NA-PK5 SERIES SERIES General terms and conditions... F-7 Sensor selection guide... P.475~ Related Information Glossary of terms... P.359~ General precautions... P.45 PHOTO PHOTO Conforming
More informationTriple Beam Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in. panasonic.net/id/pidsx/global
337 Triple Beam Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO
More informationivu Series TG Image Sensor
Quick Start Guide Introduction The ivu Series Image Sensor is used to monitor labels, parts, and packaging for type, size, orientation, shape, and location. The sensor has an integrated color touch screen
More information