M18-3 Nickel-Plated Brass 18 mm Barrel Sensors

Transcription

1 M8- Nickel-Plated Brass 8 mm Barrel Sensors Datasheet Next generation of self-contained dc-operated sensors Complete family of sensors, all housed in the popular 8 mm threaded metal barrel Economical photoelectric sensors for cost sensitive and high volume installations Powerful and bright visible red emitter beam for easy alignment and set-up Highly visible output and dual-function power and stability indicators Advanced ASIC technology is resistant to optical and electrical noise source Wide operating temperature range: C to +7 C ( F to +58 F) Robust 25 adjustment potentiometer on select models WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Emitter/Receiver Models M8-NAEL-2M 25 m (82 ft) M8-NAEJ-2M Emitter 25 m (82 ft) with beam inhibit None M8-NAES-2M 25 m (82 ft) with adjustment M8-VNRL-2M M8-VPRL-2M M8-VNRS-2M M8-VPRS-2M Receiver 25 m (82 ft) 25 m (82 ft) with adjustment Polarized Retroreflective Models M8-VNLP-2M M8-VPLP-2M M8-VNLPC-2M M8-VPLPC-2M 6 m (9.7 ft) with BRT-8 reflector 6 m (9.7 ft) with BRT-8 reflector, with adjustment Retroreflective Models M8-VNLV-2M M8-VPLV-2M 7.5 m (2.6 ft) with BRT-8 reflector, with adjustment Diffuse Models M8-VNDL-2M 75 mm (29.5 in) with adjustment Only 2 m (6.5 ft) PVC cable models are listed. To order the -pin M2/Euro-style integral QD models, add the suffix "Q8" (for example, M8-VNDL-Q8). To order the -pin M2/Euro-style pigtail QD models, add the suffix "Q5" (for example, M8-VNDL-Q5). Phone: Fax: Web: info@clrwtr.com

2 M8- Nickel-Plated Brass 8 mm Barrel Sensors Diffuse Models M8-VPDL-2M M8-VNDS-2M M8-VPDS-2M mm (.8 in) with adjustment Installing the M8- Sensor Amber LED Gain adjustment To install the M8- Sensor:. Align the sensor as required for the application. For the most sensitive object detection, align the sensor so that the objects move across the sensor's axis. 2. Secure the sensor to a bracket.. Wire sensor as shown in the wiring diagrams.. Adjust the gain adjuster (sensitivity pot) if necessary. Green LED Amber LED Figure. M8- Features and Installation Specifications Supply Voltage to V dc for ambient temperature 55 C to 2 V dc for ambient temperature > 55 C Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration or NPN by model number Output Protection Circuitry Protected against false pulse on power-up and continuous short circuit of outputs. Short circuit protection at elevated temperature may require a power cycle to reset. Output Response Time Response is independent of signal strength Opposed mode:.5 milliseconds ON,. milliseconds OFF Retro, Polarized Retro, and Diffuse:.5 milliseconds ON,.75 milliseconds OFF Delay on Power-up: milliseconds; outputs do not conduct during this time Adjustments Diffuse (DL, DS), Emitter (ES), Receiver (RS), Polarized Retroreflective (LPC), Retroreflective (LV) models: Single turn sensitivity (gain) adjustment potentiometer Emitter Beam Inhibit (EJ) models: Tie black wire to to V dc for beam inhibit Indicators Three LEDs ( green, 2 amber) Green solid: indicates power applied and sensor ready Green flashing: indicates marginal sensing signal Amber solid: indicates Pin (black wire) output conducting Supply Current (Exclusive of Load Current) Diffuse: 6 ma Opposed Mode Emitters: 7 ma Opposed Mode Receivers: 8 ma Retroreflective and Polarized Retroreflective: 6 ma Output Rating 5 ma total current for ambient temperatures > 55 C ma total current through both outputs 55 C OFF-State Leakage Current: < 5 µa at V dc ON-State Saturation Voltage: <.5 V at ma; <. V at ma Repeatability Repeatability is independent of signal strength Opposed mode: 7 microseconds Retro, Polarized Retro, and Diffuse modes: microseconds Emitter LED Visible red Construction Housing: Nickel-plated brass Front Window: PMMA Indicator Windows: Clear Polysulfone (PSU) Indicator cover and gain pot driver: Black PSU Cable: PVC jacket Pigtail QD: Nickel-plated brass and PVC jacket QD connector and mounting nuts: Nickel-plated brass Phone: Fax: Web: info@clrwtr.com

3 M8- Nickel-Plated Brass 8 mm Barrel Sensors Operating Conditions Temperature: C to +7 C ( F to +58 F) 95% at +5 C maximum relative humidity (non-condensing) Environmental Rating IEC 6529 IP67 and IP69K Vibration and Mechanical Shock All models meet Mil. Std. 22F requirements. Method 2A (Vibration; frequency to 6 Hz, max., double amplitude.6 in acceleration G). Method 2B conditions H&I (Shock: 75G with unit operating; G for non-operation) Certifications Industrial Control Equipment TJJ Class 2 power UL Environmental Rating: Type Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 2 AWG shall not be spliced. For additional product support, go to Banner Engineering website. Supply Wiring (AWG) Required Overcurrent Protection (Amps) Performance Curves Diffuse Models (75 mm Range) DISTANCE (mm) DISTANCE (mm) Diffuse Models ( mm (Range) DISTANCE (mm) DISTANCE (mm) Phone: Fax: Web: info@clrwtr.com

4 M8- Nickel-Plated Brass 8 mm Barrel Sensors Emitter/Receiver Models (Effective Beam Size: 5.2 mm) Polarized Retroreflective Models BRT-92x92C BRT-8 BRT-6xC BRT-x9A BRT-6xIP BRT-THG-2- Retroreflective Models BRT-92x92C BRT-8 BRT-6xC BRT-x9A BRT-6xIP BRT-THG Phone: Fax: Web: info@clrwtr.com

5 M8- Nickel-Plated Brass 8 mm Barrel Sensors Dimensions All measurements are listed in millimeters (inches), unless noted otherwise. Cable Models QD Models Wiring Diagrams Emitter Emitter with Active High Beam Inhibit V dc + -V dc V dc + Complementary Current Sinking (NPN) Complementary Current Sourcing (PNP) -V dc + + -V dc Load Load 2 Load 2 Load NOTE: Open lead wires must be connected to a terminal block. Phone: Fax: Web: info@clrwtr.com

6 M8- Nickel-Plated Brass 8 mm Barrel Sensors Accessories Cordsets All measurements are listed in millimeters, unless noted otherwise. -Pin Threaded M2/Euro-Style Cordsets Model Length Style Dimensions Pinout (Female) MQDC-6 MQDC-5.8 m (6 ft).57 m (5 ft) Typ. MQDC- MQDC-5 MQDC-6RA MQDC-5RA 9. m ( ft) 5.2 m (5 ft).8 m (6 ft).57 m (5 ft) Straight 2 Typ. [.26"] M2 x ø.5 2 MQDC-RA 9. m ( ft) Right-Angle Typ. [.8"] = Brown 2 = White = Blue = Black MQDC-5RA 5.2 m (5 ft) M2 x ø.5 [.57"] Washdown Cordsets -Pin Threaded M2/Euro-Style Cordsets Washdown, Stainless Steel Model Length Style Dimensions Pinout (Female) MQDC-WDSS-6.8 m (6 ft) MQDC-WDSS-5 MQDC-WDSS-.57 m (5 ft) 9. m ( ft) Straight Ø5.5 mm.5 mm Ø.8 mm = Brown 2 = White = Blue = Black 2 Apertures Model Units Aperture Description Product AP8SCN Kit includes round apertures of.5 mm (.2 in),. mm (. in), and 2.5 mm (. in) diameter. AP8SRN Kit includes rectangular apertures of.5 mm (.2 in),. mm (. in), and 2.5 mm (. in) wide. Each kit also includes a thread-on housing, Teflon FEP lens, and o-ring. APG8S Kit with glass lens to protect plastic sensor lens from chemical environments and weld splatter damage. Phone: Fax: Web: info@clrwtr.com

7 M8- Nickel-Plated Brass 8 mm Barrel Sensors Brackets SMB8SF 8 mm swivel bracket with M8 internal thread Black thermoplastic polyester Stainless steel swivel locking hardware included A B SMBS8-2- % glass-filled PBT.5 M8 - x 6G ø28 Hole center spacing: A = 6. Hole size: A = ø 5., B = ø 8. SMB8A Right-angle mounting bracket with a curved slot for versatile orientation 2-ga. stainless steel 8 mm sensor mounting hole Clearance for M (#8) hardware A 6 C B SMB8FA.. Swivel bracket with tilt and pan movement for precision adjustment Easy sensor mounting to extruded rail T-slots Metric and inch size bolts available 8 mm sensor mounting hole 69 A 66 B Hole center spacing: A to B = 2.2 Hole size: A = ø.6, B = 7..6, C = ø 8.5 Hole size: B=ø 8. Model SMB8FA Bolt Thread (A) /8-6 2 in SMB8FAM M SMB8FAM2 n/a; no bolt included. Mounts directly to 2 mm (½ in) rods For additional brackets, check the current Banner catalog or visit Banner Engineering website. All measurements are listed in millimeters, unless noted otherwise. Reflectors BRT-2X2 Square, acrylic target Reflectivity factor:. Max. temperature: +5 C (+22 ºF) Optional brackets are available Approximate size: 5 mm 5 mm BRT-8X8A Square, acrylic target Reflectivity Factor: 2. Temperature: 2 C to +6 C ( F to + F) Approximate size: 8 mm 8 mm Phone: Fax: Web: info@clrwtr.com

8 M8- Nickel-Plated Brass 8 mm Barrel Sensors BRT-X9A Rectangular, acrylic target Reflectivity Factor:. Temperature: 2 C to +6 C ( F to + F) Approximate size: 9 mm 6 mm overall; 9 mm mm reflector BRT-6XC Rectangular, acrylic target Reflectivity Factor:. Temperature: 2 C to +6 C ( F to + F) Optional brackets are available Approximate size: mm 6 mm BRT-8 Round, acrylic target Reflectivity Factor:. Temperature: 2 C to +6 C ( F to + F) Optional brackets are available Size: 8 mm diameter Mounting Hole:.5 mm diameter Retroreflective Tape Model BRT- THG-2- Reflectiv ity Factor Maximum Temperatur e.7 +6 C (+ F) Size 5 mm (2 in) wide, 2.5 m ( in) long Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Phone: Fax: Web: info@clrwtr.com