M Tumvantar 09, innervantar Thumb mittens 09 M Trefingervantar 09, innervantar Three finger mittens DESCRIPTION...

Transcription

1 1(15) M Tumvantar 09, innervantar Thumb mittens 09 M Trefingervantar 09, innervantar Three finger mittens 09 TABLE OF CONTENTS 1. DESCRIPTION APPLICABLE DOCUMENTS PRODUCT REQUIREMENTS MANUFACTURING SKETCHES QUALITY ASSURANCE PACKING INSTRUCTIONS Confirmed: Date: Helena Lundberg Product manager Quartermaster materiel

2 2(15) 1. DESCRIPTION Thumb-and three finger mittens are made of uncoloured and unbleached half combed yarn. The mittens are plain knitted with inside wool terry knitting. The inner mittens to be used together with winter gloves 09, article M and article M The mittens are made in sizes: small, medium and large. Sizes: S fits hand sizes 6 and 7 M fits hand sizes 8 and 9 L fits hand sizes 10 and 11

3 3(15) 2. APPLICABLE DOCUMENTS For documents mentioned in this Technical Specification, issues which are current at the time of the enquiry will apply. 2.1 SS Knitted garment - General requirements - Testing and inspection 2.2 SS Colour atlas NCS (Natural Color System) NCS-Natural Color System, address: Skandinaviska Färginstitutet AB, Box 49022, S Stockholm Phone no Fax no EN ISO 105-B02/A1 Colour fastness to artificial light: Xenon arc fading lamp test / Amd 2: References 1 to Conditions preferable for use in Europe a) Normal conditions Method EN ISO 6330 Domestic washing and drying procedures for textile testing 7. Washing procedure Table 1: Machine Type A1 Procedure 1A 92 C Procedure 5A Drying procedure 8.5 Tumble dry 2.5 EN ISO 105-C06 Colour fastness to domestic and commercial laundering Two single-fibre adjacent fabrics 6. Test No E1S 95 C 6. Test No A1S 40 C 4.4 b) ECE Detergent 2.6 EN ISO 105-E04 Colour fastness to perspiration Two single-fibre adjacent fabrics 2.7 EN ISO 5077 Determination of dimensional change in washing and drying 2.8 EN ISO 105-X12 Colour fastness to rubbing

4 4(15) 2.9 EN ISO 2062 Yarn from packages - Determination of single-end breaking force and elongation at break 2.10 ISO 4915 Stitch types - Classification and terminology 2.11 ISO 4916 Seam types - Classification and terminology 2.12 FSD A4702:116 Ownership mark (crown mark) Size: Öko-Tex General and special conditions Standard 100 Product class II 2.14 EN ISO 9001 Quality management systems Requirements. Permissible exclusions: Sub-clause 7.3: design and development 2.15 Patterns, number A are available through: Stenwall & Ljungkvist Datorgradering AB, Sagagatan 22, SE Borås. Phone no Fax no peter@sl-datorgradering.se. Patterns are digitised in Lectra-system. The supplier is responsible for any deviations that may occur if the patterns are converted to another pattern system. Ordered patterns and computer calculated markers, if needed, to be paid by the bidder/supplier A model will be supplied by FMV in connection with the FMV production briefing to the appointed manufacturer. In the case of any difference between the model and this Technical Specification, the Technical Specification shall take precedence If any documentation supplied by FMV should seem incorrect, FMV must be informed about this. No drawings or specifications may be altered without the agreement of FMV.

5 5(15) 3. PRODUCT REQUIREMENTS The workmanship must conform to the industry standard for the manufacture of quality goods as described below. Material provided by the supplier must be of the quality as required below and must be approved by FMV before being used. 3.1 Yarn: Fabric composition 1- thread core spun yarn (2 threads of polyester + 1 thread elastane) (3.1.2) 1 thread 100 % wool (3.1.1) 80 % wool + 19% polyester/1 % elastane, tolerance ± 3 % Colour: uncoloured and unbleached guideline value NCS S 1005-Y50R Wool quality: Loop yarn 100 % Wool with an average fibre diameter of 21 ± 1,5 µm Yarn no: Nm 26/2 Fiber length: min.68 mm Yarn direction: 362 Z and 160 S The wool to be shrink free treated in tops, according to a method that do not damage the wool fibre. The method to be stated in the tender Elastane thread: Bottom yarn 90% Polyester + 10 % Elastane ± 2 % Elastane fibre (e.g. Lycra, type 146) covered with textured polyester in the same colour as the mitten. Textured polyester fineness: 76 dtex (70 denier) Elastane fibre fineness: 83.3 dtex (75 denier) Ready knitted fabric: Weight: 480 ± 20 gr/m² Properties: Requirements: Test method: Dimensional change length and max. 7 % EN ISO 5077 width / mitten after 1 wash EN ISO 6330, 40 C

6 6(15) 3.2 Band: Properties: Requirements: Test method: Colour fastness to light min. 4 EN ISO 105-B02/A1 Colour fastness to washing min. 4 EN ISO 105-C06, 60 C Colour fastness to rubbing, dry min. 4 EN ISO 105-X12 Colour fastness to rubbing, wet min. 3 EN ISO 105-X12 Dimensional change, warp/ weft max. 2 % after 1 wash EN ISO 5077 EN ISO 6330, 60 C Band: 30 mm edge band for the upper edge 84 % Polyamide, 16 % Elastane Fineness: 44 dtex Colour: blue, guideline value NCS S 2065-R90B, Pantone red, guideline value NCS S 1080-R, Pantone green, guideline value NCS S1070-G10Y, Pantone Size: S = blue, M = red, L = green Band: 8 10 mm loop band 100 % Cotton Structure: twill weave Colour: unbleached, guideline value NCS S 1005-Y50R 3.3 Sewing thread: Colour: black and unbleached Properties: Requirements: Test method: Colour fastness to light min. 4 EN ISO 105-B02/A1 Colour fastness to washing min. 4 EN ISO 105-C06, 60 C Dimensional change max. 1 % after 1 wash EN ISO 5077 EN ISO 6330, 60 C Lock stitch: 100 % Polyester, core spun PET/PET Tex 60x3, ticket no. 50 Properties: Requirements: Test method: Tensile strength min. 35 N EN ISO 2062

7 7(15) Overlock stitch: 100 % Polyester, core spun PET/PET 125x2 dtex, ticket no. 120 Properties: Requirements: Test method: Tensile strength min. 10 N EN ISO The requirements in Öko-Tex Standard 100 to be fulfilled, general and special conditions, Product class II 3.5 Nonylephenolethoxylate is not permitted in the ready made mittens or any step of the manufacture process of the mittens.

8 8(15) 3.5 Label: The text to be woven. Label about 40 x 60 mm, to be sewn folded on the inside below the collar cuff openings seam/edge, indicating: M-number Mark of ownership according FSD A4702:116, size 1 Year of manufacture Size Material Care instruction Manufacturer Country of origin 20 M7330- STORLEK: 8 12 ULL/POLYESTER TORKNING max 30 C TILLVERKARE TILLVERKNINGSLAND Label size to be adapted to an automatic labelling machine. The label material to be 100% polyester in silver-grey colour. Other properties Requirement Test method Colour fastness to 4-5 EN ISO 105-C06 washing Two single-fibre adjacent fabrics 6 Test No E2S 95 C Dimensional change warp/weft, after washing 4.4 b) ECE Detergent max 2 % EN ISO 5077 EN ISO Washing procedure Table 1:Machine Type A1 Procedure 1 A 92 C 8.5 Tumble dry Ownership mark, Crown mark as per FSD A4702:116, size 1. Merchandise, that has been crown marked and rejected during production, or at delivery control, must not be sold by the supplier on the public market before the crown mark has been removed or obliterated (Act of law , SFS nr 498/1970).

9 9(15) 4. MANUFACTURING 4.1 The mittens to be manufactured in close accordance with this Technical Specification and the master sample, supplied by FMV. In all respects the manufacturing is to conform to the standards customary with civil quality mittens of this type. 4.2 ISO 4915 Stitch types - Classification and terminology 4.3 ISO 4916 Seam types - Classification and terminology 4.4 Knitting Gauge: Knitting: 9 npi Plain knitted with terry knitting inside needle 3-thread overlock Stitch type 504, seamtype Seam allowance min. 5 mm Assembling of mitten needle lock stitch 4.7 Needle Stitch type 301, seam type Stitch length mm Mounting of edge band and label. Cutting point needles must not be used for knitted fabric seams. The gauge of the needle must be suitable for the material to avoid damage on the knitted fabric.

10 10(15) 5. SKETCHES INNER MITTENS IN TERRY KNITTING FOR THUMB GLOVES 09 BLACK EDGE BAND 30 MM LOOP BAND OPENING 30 MM

11 11(15) INNER MITTENS IN TERRY KNITTING FOR THREE FINGER GLOVES 09 BLACK EDGE BAND 30 MM LOOP BAND OPENING 30 MM TRIGGER FINGER

12 12(15) 6. QUALITY ASSURANCE Supplier's Commitments The supplier shall establish and maintain an effective quality system that meets the requirements of EN ISO 9001, Quality management systems - Requirements. Permissible exclusion: Sub-clause 7.3, Design and development. The supplier shall provide FMV*, in good time before the start of production, with reference samples and material together with documents according to a, b, c, d, and e, listed below. The requirements in this Technical Specification must be fulfilled. a) Reference samples from the production plant where the actual production is placed: 2 pair of mittens / size b) Test report from an independent laboratory, accredited to perform test methods required in this specification, for: Yarn Öko-Tex Standard 100 Product class II c) Test report from a laboratory, owned by the supplier or other, for: Label d) Technical data sheet, showing that the product fulfils the requirements, for: All included materials. e) Separate samples of the following components shall be sent in: 1 m each, of knitted quality and bands. Of all other used materials: Two samples of each item. FMV assesses and approves the received material. Buyer's Quality Control FMV reserves the right to review the supplier's quality system and to make manufacturing and quality inspections during the current period of contract in a way that FMV considers suitable. * ADDRESS: FMV: FMgem prod, SE Stockholm, Sweden

13 13(15) 7. PACKING INSTRUCTIONS 7.1 Ordering of packing The order must be in writing and sent to: FMCL, Styrmansgatan 14, ARBOGA, SWEDEN. To state: - number of the current order, eg. LB-number - stock-number and stock-designation - desired number of boxes - number of labels per size FMCL encloses the adequate number of sealing tape required for the ordered number of boxes. 7.2 Spare packing The above mentioned packing shall be used exclusively in connection with the current order. Any spare packing shall be returned to FMCL, Styrmansgatan 14, ARBOGA, SWEDEN. fmlog-forsl-fmcl@mil.se. Suppliers failing to do so will be charged for the spare packing items. 7.3 Types of cardboard boxes Terms for different boxes Size (mm) L x W x H No. of readypacked boxes/ pallet No. of folded boxes, bundled/ pallet Sizes (mm) of bundled boxes incl. height of pallet Weight (kg) bundled boxes incl. pallet No. of folded boxes/ bundle, tied up K2 M x380x x1200x Number of products per cardboard box Type of box: Number: Stock-number: Stock-designation: K2 20 pair M TUMVANTAR 09 K2 20 pair M TREFINGERVANTAR Information about the quality of the cardboard boxes The boxes are extra thick and specially treated for piling up and storing during longer times. 7.6 Sealing tape M The cardboard boxes shall be sealed with the supplied sealing tape in such a way that the labels are not concealed. The bottom of the boxes shall be sealed with a lengthwise sealing tape both on the inside and outside of the box. Figure Information about the quality of the sealing tape The sealing tape is to be wet with water in order to get affixed The sealing tape is specially treated to protect the products against damp and other damages.

14 14(15) 7.8 Packing Boxes not filled up N.B. More than one size in each cardboard box is not allowed. If all of one size does not fill up the whole of a box, the vacant space shall be filled up with other suitable materials. This filling must not generate dust or otherwise be detrimental to its contents. Exceptions, if any must be approved by FMV. Type of pallets 7.9 Marking Pre-printed data Figure 2. Data filled in by the supplier Position of the two labels The cardboard boxes shall be loaded on EUR pallets, 800 x 1200 mm. The pallets to be in perfect condition. The boxes shall be secured on to the pallet. The supplier shall free of charge supply the requisite number of pallets. Deliveries without required pallets will be replaced with new pallets. The extra cost will be charged the contractor. a) Stock-number (FBET) b) Stock-designation (FBEN) c) Number d) Size e) Number of the order f) Date of packing g) In exceptional cases, FMV may allow deviation from the stipulated number of pieces in the boxes in written form. In such cases both the bar-code and the figures are to be crossed out. The actual number of pieces shall then be indicated with a felt pen on the label. Figure 2. To facilitate the end-user's scanning, please attach the labels evenly over the corresponding box print. Figure 1. Figure 1. Labels Sealing tape both on the inside and outside of the box FBEN X X X X X X Figure 2. FBET M ANTAL STORLEK SAMMANF FBET M BEST NR LB00000 FÖRP.DAG År Mån Dag Å År = Year Mån = Month Dag = Day See packing instruction 6.1 Fill in

15 15(15) 7.10 The gloves to be fastened together in pairs and packed in a poly bag. An adhesive label, as below, must be attached to the bag: NOTICE, only one size in each carton. M-number Size marking Material Care instruction M S Material: ULL / POLYESTER Skötsel: Handtvätt 30 C Torkning max 30 C M-number Size marking Material Care instruction M M Material: ULL / POLYESTER Skötsel: Handtvätt 30 C Torkning max 30 C