Discipline Mechanical Testing Issue Date Certificate Number T-1114 Valid Until Last Amended on - Page 1 of 10

Transcription

1 Last Amended on - Page 1 of 10 I. TEXTILES & RELATED PRODUCTS 1. Garment/Yarn/ Fabric Yarn count ASTM D 1059 ISO NA 2. Garment/Fabric "Mass per unit area (weight) of fabric ASTM D 3776 : 2009 ae2 (option C) BS EN ISO 3801 Upo 590 GSM Fabric count of woven fabric ASTM D3775: 2008 ISO to 100/cm (25 to 250/inch) Stitch density of knitted fabric ASTM D 3887 : 1996 (2008) 2 to 40/cm (10-10/inch) Domestic washing and drying procedures for textile testing Breaking strength & elongation textile fabric ( Grab Test) Breaking strength & elongation textile fabric ( Strip Method) ISO 6330 : A1:2008/2012 BS EN ISO 6330: 2001+A1:2009 DIN EN ISO 6330 ASTM D5034 : 2009 ASTM D 5035 : to 50% 1kg to 200 kg 10 N to 2000 N 1kg to 200kg 10 N to 2000 N Water Repellency : Spray test AATCC-22 : 2010 ISO Grade:1-5 (0 to 100)

2 Last Amended on - Page 2 of 10 Resistance of slippage of yarns in woven fabric using a std seam ASTM D 434 : 1995 BS EN ISO kg to 100kg (5 N to 1000 N) Failure in sew seams of woven fabrics ASTM D 1683 : kg-100kg (5 N to 1000 N) Determination of slippage resistance of yarns in BSEN ISO woven fabrics : Seam method BS EN ISO Part II : kg to 100kg (5 N to 1000 N) Tearing strength of fabrics by falling pendulum type (Elmendorf) apparatus Tearing strength of fabrics by the tongue ( single rib) procedure (constant-rate-extension tensile testing machine) Hydraulic bursting strength of knitted gods and non-woven fabrics-diaphragm bursting strength tester method ASTMD 1424 : 2009 ASTM D 2261: 2011 ISO ASTM D 3786/D 3786M : 2009 BSEN ISO g to 24 kg 0.5 kg to 30 kg (5 N to 300 N) Upto 1034 Kpa (150 psi) Flammability 16 CFR 1610 : 2008 ASTM D 1230 : 2010 Class 1.0 to class 3.0

3 Last Amended on - Page 3 of 10 Pilling resistance and other related surface changes of textile fabrics : Elastomeric pad pilling ASTM D 3514/D3514 M-2010 Grade:1 to 5 Pilling resistance and other related surface changes of textile fabrics : Random tumble pilling tester ASTM D3512 / D3512 M:10 e2 Grade:1 to 5 Abrasion resistance of textile fabrics ( inflated diaphragm method) ASTM D 3886 : 1999 (2011e1) Min. Limit of detection 5 cycles Skewness change in fabric and garment twist resulting from automatic home launderings Abrasion resistance of textile fabrics : Martindale abrasion tester method AATCC 179 : to 50 % ASTM D 4966 : 2010 Min cycle : 100 Determination of the abrasion resistance of fabrics by the Martindale method part-1 BS EN ISO Part I, II : 1998, Part IV : BS EN ISO Part III : 1998 DIN EN ISO (part II) Grade:1 to 5 Determination of fabric propensity of surface fuzzing & to pilling BS EN ISO : 2001 Grade:1 to 5

4 Last Amended on - Page 4 of 10 Determination of fabric propensity of surface fuzzing & to pilling(modified Martindale method) ISO : 2000 Grade:1 to 5 Determination of tear force using ballistic pendulum method (Elmendorf) ISO : Kg to 24 Kg (2 N to 240 N) Oil repellency-hydrocarbon resistance test Soil Release Oily stain release method Aqueous liquid repellencywater/alcohol solution resistance test 3. Fabric Dimensional changes to automatic home laundering of woven & knit fabrics AATCC 118 : 2007 Upto grade : 8 AATCC 130 : 2010 Class 1.0 to class 5.0 AATCC 193 : 2007 Upto Grade : 8 AATCC 135 : 2010 ±50 % Stretch Properties of Knitted fabrics having Low power ASTM D 2594:2004 (Reapp:2008) Up to 200% Stretch Properties of Fabrics woven from Stretch Yarns ASTM D 3107:2007 Upto 100%

5 Last Amended on - Page 5 of 10 Bow & Skew in Woven & Knitted Fabrics 4. Garment Dimensional changes to automatic home laundering of garments ASTM D 3882: to 50 % AATCC 150 : to 50 % Determination of sharp points ( under a force of 4.45N(1 pound) ASTM F 963 : 2011 Section CFR Qualitative Determination of sharp edges (under a force of 8.90 N(2 pound) Determination of small parts torque test up to 9kg-cm ( up to 7.8 inch pounds) ASTM F 963 : 2011 Section CFR ASTM F 963 : 2011 Section CFR Qualitative Qualitative Determination of small parts tension test ASTM F 963 : 2011 Section CFR Qualitative Small parts-choking hazard test ( small part cylinder of 31.7 mm inner diameter) ASTM F 963 : 2011 Section CFR 1501 Qualitative 5. Snaps fastness attached to fabric/garment Resistance to unsnapping of snap fastness (textile auxiliaries) ASTM D 4846 :1996 (2011) 1 to 250 N

6 Last Amended on - Page 6 of Zipper strength properties (separate or attached with garment) Strength test for zippers (Textile Auxiliary ASTM D 2061 : 2007 BS 3084 : to 1500 N II. LEATHER & LEATHER PRODUCTS 1. Leather / Footwear Tensile Strength BS EN ISO 3376 EN ISO EN ISO EN ISO IUP 6 1 to 100 N/mm 2 Tear Strength BS EN ISO 3377 Part ll Ref. SATRA TM 162 EN ISO EN ISO EN ISO IUP 8 2 to 1000 N Tear Strength BS EN ISO 3377 Part l 2 to 1000 N Abrasion Resistance (Martindale) Flexing Resistance (Bally) Hardness Ref. SATRA TM 31 NF EN EN ISO EN ISO EN ISO BS EN ISO 5402 Ref. SATRA TM 55 IUP 20 EN to Rubs 100 to flexes

7 Last Amended on - Page 7 of 10 Seam Strength BS Ref. SATRA TM 180 NF EN to 40 N/mm Tensile Strength Ref. SATRA TM 43 1 to 100 N/mm 2 2. Footwear Heel Attachment Strength Ref. SATRA TM 113 BS EN ISO Top Piece Attachment Strength Ref. SATRA TM 108 BS5131:5.9 ENISO to 2000 N 2 to 500 N Toe Post Attachment Strength Ref. SATRA TM to 500 N Sole Bond Peel Strength Ref. SATRA TM 411 BS EN ISO BS EN ISO EN ISO EN ISO Ross Flexing Resistance Ref. SATRA TM 60 BS to 20 N/mm 100 to cycles Whole Shoe Flexing Resistance Ref. SATRA TM to cycles Flexing Resistance of Sole (Belt) Ref. SATRA TM to cycles

8 Last Amended on - Page 8 of 10 Flexing Resistance of Sole (Bennewart) EN ISO Ref. SATRA TM 161 EN ISO EN ISO EN ISO to Flexes Hardness ASTM D 2240 Ref. SATRA TM to 100 Buckle & Strap Attachment Strength Ref. SATRA TM 181 BS to 1000 N Decorative Bow Attachment Strength Ref. SATRA TM to 1000 N Strap to Sole Attachment Strength Ref. SATRA TM to 1000 N Abrasion resistance (Sole material) BS EN ISO 4649 EN Ref. SATRA TM to 1500 mm 3 Toe and Heel Bond Strength BS5131:5.1 Ref. SATRA TM to 1000 N Strength of eyelet facings and other laced fastenings Ref. SATRA TM to 800 N Attachment of Eyelet Ref. SATRA TM to 800 N

9 Last Amended on - Page 9 of 10 Tear strength of Textiles Ref. SATRA TM 30 5 to 1000 N Density ISO 2781 Ref, SATRA TM 12 Fatigue Resistance Ref. SATRA TM 21 ENISO19956 BS Impact Resistance Ref. SATRA TM 20 BS Leather Determination of Thickness BS EN ISO 2589 ASTM D1813 Ref, SATRA TM g/mm 3 to 1.9 g/mm to cycles 0 to 18.3 J 0.01 mm to 5 mm Upper Flexing Resistance (Vamp) Ref. SATRA TM to flexes Cold crack resistance ISO IUP 29 ASTM D1912 Adhesion of Finish BS EN ISO IUF to 30 degree 0.5 N/ 10 mm to 50 N/ 10 mm Determination of dry heat resistance BS EN ISO IUP to 250 degree Blocking Resistance Of Leather ASTM D 6116

10 Last Amended on - Page 10 of 10 Flexibility and Adhesion of Finish on Leather ASTM D to flexes Breaking Strength Of Leather ASTM D to 390 lbs Tear Strength Of Leather ASTM D to 390 lbs -X-X-X-X-X-X-X-X-X-X-X-X-X-X-