This document is a preview generated by EVS
|
|
- Flora Crawford
- 6 years ago
- Views:
Transcription
1 EESTI STANDARD EVS-EN 14976:2005 Textiles - Mattress ticking - Specifications and test methods Textiles - Mattress ticking - Specifications and test methods EESTI STANDARDIKESKUS
2 EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN 14976:2005 sisaldab Euroopa standardi EN 14976:2005 ingliskeelset teksti. Käesolev dokument on jõustatud ja selle kohta on avaldatud teade Eesti standardiorganisatsiooni ametlikus väljaandes. Standard on kättesaadav Eesti standardiorganisatsioonist. This Estonian standard EVS-EN 14976:2005 consists of the English text of the European standard EN 14976:2005. This document is endorsed on with the notification being published in the official publication of the Estonian national standardisation organisation. The standard is available from Estonian standardisation organisation. Käsitlusala: This European Standard specifies properties, test methods (other than flammability) and minimum requirements for ticking (woven, nonwoven or knitted), suitable for covering mattresses, divans and bed bases which are intended for residential (domestic) use, and for use in the public sector and contract markets. Scope: This European Standard specifies properties, test methods (other than flammability) and minimum requirements for ticking (woven, nonwoven or knitted), suitable for covering mattresses, divans and bed bases which are intended for residential (domestic) use, and for use in the public sector and contract markets. ICS Võtmesõnad: cloth, definition, flammability, marking, mattresses Standardite reprodutseerimis- ja levitamisõigus kuulub Eesti Standardikeskusele
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN November 2005 ICS English Version Textiles - Mattress ticking - Specifications and test methods Textiles - Coutil à matelas - Spécifications et méthodes d'essai Textilien - Matratzendrell - Anforderungen und Prüfverfahren This European Standard was approved by CEN on 30 September CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14976:2005: E
4 EN 14976:2005 (E) Contents Page Foreword Scope Normative references Terms and definitions Requirements Additional information Marking, labelling, packaging...7 Annex A (informative) Assessment of roll length in a production environment....8 Annex B (informative) Determination of flexing and bias...9 2
5 EN 14976:2005 (E) Foreword This European Standard (EN 14976:2005) has been prepared by Technical Committee CEN/TC 248 Textiles and textile products, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by May According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 3
6 EN 14976:2005 (E) 1 Scope This European Standard specifies properties, test methods (other than flammability) and minimum requirements for ticking (woven, nonwoven or knitted), suitable for covering mattresses, divans and bed bases which are intended for residential (domestic) use, and for use in the public sector and contract markets. NOTE Some countries have regulations on the fire behaviour of mattresses and mattress components. These regulations should be observed. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1773, Textiles - Fabrics - Determination of width and length EN 12127, Textiles - Fabrics - Determination of mass per unit area using small samples EN 25077, Textiles - Determination of dimensional change in washing and drying (ISO 5077:1984) EN ISO 105-B02, Textiles -Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02: 1994, including amendment 1:1998) EN ISO 105-C08, Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator (ISO 105-C08: 2001) EN ISO 105-E04, Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105- E04: 1994) EN ISO 105-X12, Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (ISO 105-X12: 2001) EN ISO 6330, Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2000) EN ISO , Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance (ISO :1997) EN ISO , Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO :1999) EN ISO , Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method (ISO :2004) EN ISO , Textiles -Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) (ISO :2000) EN ISO , Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO :1999) 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 4
This document is a preview generated by EVS
EESTI STANDARD EVS-EN 13186:2005 Feather and down - Specification for feather and down filled bedding articles Feather and down - Specification for feather and down filled bedding articles EESTI STANDARDIKESKUS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14465:2004 Textiles - Upholstery fabrics - Specification and methods of test Textiles - Upholstery fabrics - Specification and methods of test EESTI STANDARDIKESKUS EESTI STANDARDI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13847:2001 Coal tar and pitch based binders and related products - Terminology and classification Coal tar and pitch based binders and related products - Terminology and classification
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1506:2007 Hoonete ventilatsioon Ümmarguse ristlõikega lehtmetallist õhutorud ja fitingud Mõõtmed Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 622-5:2006 Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14219:2003 Hexagon bolts with flange with metric fine pitch thread - Small series Hexagon bolts with flange with metric fine pitch thread - Small series EESTI STANDARDIKESKUS EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12228:2002 Surfaces for sports areas - Determination of joint strength of synthetic surfaces Surfaces for sports areas - Determination of joint strength of synthetic surfaces EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1505:2001 Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions Ventilation for buildings - Sheet metal air ducts and fittings
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1943:2003 Self adhesive tapes - Measurement of static shear adhesion Self adhesive tapes - Measurement of static shear adhesion EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14399-3:2005 High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies High-strength structural bolting assemblies for preloading
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13900-3:2003 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10244-4:2001 Steel wire and wire products - Nonferrous metallic coatings on steel wire - Part 4: Tin coatings Steel wire and wire products - Non-ferrous metallic coatings on steel
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 2338:1999 Karastamata terasest ja roostevabast austeniitterasest silindertihvtid Parallel pins, of unhardened steel and austenitic stainless steel EESTI STANDARDIKESKUS EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10245-4:2003 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire Steel wire and wire products - Organic coatings on steel wire - Part 4:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 16047:2005 Fasteners - Torque/clamp force testing Fasteners - Torque/clamp force testing EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13300:2001 Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification Paints and varnishes - Water-borne coating materials
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 6504-1:2006 Paints and varnishes - Determination of hiding power - Part 1: Kubelka-Munk method for white and light-coloured paints Paints and varnishes - Determination of hiding
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 14583:2002 Hexalobular socket pan head screws Hexalobular socket pan head screws EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 150:2007 Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test Raw, refined and boiled linseed oil for paints and varnishes - Specifications
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13978-1:2005 Betoonvalmistooted. Eelvalatud betoongaraažid. Osa 1: Nõuded monoliitsetele või üksikutest ruumi mõõtmetele vastavatest komponentidest koosnevatele sarrustatud (raudbetoonist)
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 14579:2002 Hexalobular socket head cap screws Hexalobular socket head cap screws EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 15748-2:2002 Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation Ships and marine technology - Potable water supply
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 3037:2007 Gofreeritud fiiberpapp. Põiksuunalise katkemistugevuse määramine (vahatamata serva meetod) Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13068-3:2002 Mittepurustav testimine. radioaktiivsuse testimine. Osa 3: Metallmaterjalide testimise üldised põhimõtted X- ja gamma kiirte abil Non-destructive testing - Radioscopic
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 4628-6:2007 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 13628-8:2007 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15016-1:2005 Tehnilised joonised Raudteealased rakendused Osa 1: Üldpõhimõtted Technical drawings - Railway applications - Part 1: General principles EESTI STANDARDIKESKUS EESTI STANDARDI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-ENV 14237:2008 Textiles in the healthcare system EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-ENV 14237:2008 sisaldab Euroopa standardi ENV 14237:2002 ingliskeelset
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 50065-2-2:2003 Madalpinge-elektripaigaldistel olev signalisatsioon sagedusalal 3 khz kuni 148,5 khz. Osa 2-2: Häiringukindluse nõuded sagedusalal 95 khz kuni 148,5 khz töötavatele
More informationThis document is a preview generated by EVS. Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water (ISO 105-E02:2013)
EESTI STANDARD EVS-EN ISO 105-E02:2013 Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water (ISO 105-E02:2013) EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 15748-1:2002 Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design Ships and marine technology - Potable water supply
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13888:2009 Grout for tiles - Requirements, evaluation of conformity, classification and designation EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN 13888:2009
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 62272-2:2007 Digital Radio Mondiale (DRM) -- Part 2: Digital radio in the bands below 30 MHz - Methods of measurement for DRM transmitters Digital Radio Mondiale (DRM) -- Part 2:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 8015:2011 Toote geomeetrilised spetsifikatsioonid (GPS). Alused. Käsitlusviisid, põhimõtted ja reeglid Geometrical product specifications (GPS) - Fundamentals - Concepts, principles
More informationEESTI STANDARD EVS-EN ISO 28762:2010
EESTI STANDARD EVS-EN ISO 28762:2010 Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification (ISO 28762:2010) EESTI STANDARDI EESSÕNA Käesolev Eesti standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 16315:2014 Textiles - Silk woven fabrics for womenswear, silk squares, scarves and ties - Requirements and test methods EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 4535:2003 Vitreous and procelain enamels - Apparatus for determination of resistance to hot detergent solutions used for washing textiles EESTI STANDARDIKESKUS EESTI STANDARDI
More informationFästelement Sexkanthålsskruvar med sänkhuvud (ISO 10642:2004) Hexagon socket countersunk head screws (ISO 10642:2004)
SVENSK STANDARD SS-EN ISO 10642:2004 Fastställd 2004-03-19 Utgåva 2 Fästelement Sexkanthålsskruvar med sänkhuvud (ISO 10642:2004) Hexagon socket countersunk head screws (ISO 10642:2004) ICS 21.060.10 Språk:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 60966-2-6:2009 Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz,
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15302:2008 Raudteealased rakendused. Meetodid koonilisuse ekvivalendi määramiseks Railway applications - Method for determining the equivalent conicity EESTI STANDARDI EESSÕNA NATIONAL
More informationFästelement Sexkanthålsskruvar (ISO 4762:2004) Hexagon socket head cap screws (ISO 4762:2004)
SVENSK STANDARD SS- Fastställd 2004-03-19 Utgåva 2 Fästelement Sexkanthålsskruvar (ISO 4762:2004) Hexagon socket head cap screws (ISO 4762:2004) ICS 21.060.10 Språk: engelska Publicerad: maj 2004 Copyright
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 19901-1:2006 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations Petroleum and natural
More informationHexagon socket button head screws (ISO 7380:2004)
SVENSK STANDARD SS-EN ISO 7380:2004 Fastställd 2004-02-06 Utgåva 2 Fästelement Sexkanthålsskruvar med rundat huvud (ISO 7380:2004) Hexagon socket button head screws (ISO 7380:2004) ICS 21.060.10 Språk:
More informationDEUTSCHE NORM DIN EN ISO 10447
DEUTSCHE NORM DIN EN ISO 10447 September 2007 D ICS 25.160.40 Supersedes DIN ISO 10447:1994-11 Resistance welding Peel and chisel testing of resistance spot and projection welds (ISO 10447:2006) English
More informationThis document is a preview generated by EVS
EESTI STANDARD Betoonvalmistooted. Tugiseinaelemendid Precast Concrete Products - Retaining wall elements EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard sisaldab Euroopa standardi EN
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 60495:2002 Single sideband power-line carrier terminals EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN 60495:2002 sisaldab Euroopa
More informationEESTI STANDARD EVS-EN ISO 286-2:2010
EESTI STANDARD EVS-EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes
More informationhttp://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 4415:2006 Fastställd 2006-09-04 Utgåva 1 Aerospace series
More informationSVENSK STANDARD SS-EN ISO :2004
SVENSK STANDARD SS-EN ISO 12224-3:2004 Fastställd 2004-10-08 Utgåva 1 Lödtråd för mjuklödning, massiv och flussfylld Specifikation och provningsmetoder Del 3: Vätningsbalansmetod för bestämning av effektiviteten
More informationPlywood Limningskvalitet Del 1: Provning. Plywood Bonding quality Part 1: Test methods
SVENSK STANDARD SS-EN 314-1:2005 Fastställd 2005-01-14 Utgåva 2 Plywood Limningskvalitet Del 1: Provning Plywood Bonding quality Part 1: Test methods ICS 79.060.10 Språk: engelska Publicerad: februari
More informationInjection containers and accessories Part 1: Injection vials made of glass tubing (ISO :2003)
SVENSK STANDARD SS-EN ISO 8362-1:2004 Fastställd 2004-09-24 Utgåva 1 Behållare för injektionsvätskor Del 1: Injektionsflaskor och injektionsampuller tillverkade av glasrör (ISO 8362-1:2003) Injection containers
More informationILNAS-EN 14136: /2004
05/2004 National Foreword This European Standard EN 14136:2004 was adopted as Luxembourgish Standard in May 2004. Every interested party, which is member of an organization based in Luxembourg, can participate
More informationEnglish Version EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 10226-2 August 2005 ICS 21.040.30 English Version Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads
More informationSVENSK STANDARD SS-EN ISO :2004. Ögonoptik Råkantade färdiga glasögonglas Del 2: Progressiva glas (ISO :2004)
SVENSK STANDARD SS- Fastställd 2004-03-12 Utgåva 2 Ögonoptik Råkantade färdiga glasögonglas Del 2: Progressiva glas (ISO 8980-2:2004) Ophthalmic optics Uncut finished spectacle lenses Part 2: Specifications
More informationMunkaanyag
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16555-6 December 2014 ICS 03.100.40; 03.100.50 English Version Innovation management - Part 6: Creativity management Management
More informationFasteners Torque/clamp force testing (ISO 16047:2005)
SVENSK STANDARD SS- Fastställd 2005-02-18 Utgåva 1 Fästelement Provning av moment/kraftutbyte (ISO 16047:2005) Fasteners Torque/clamp force testing (ISO 16047:2005) ICS 21.060.01 Språk: engelska Publicerad:
More informationBelysningsstolpar Del 2: Allmänna krav och mått
SVENSK STANDARD SS-EN 40-2:2004 Fastställd 2004-10-22 Utgåva 1 Belysningsstolpar Del 2: Allmänna krav och mått Lighting columns Part 2: General requirements and dimensions ICS 93.080.40 Språk: engelska
More informationCommunication systems for meters and remote reading of meters - Part 4: Wireless meter readout (Radio meter reading for operation in SRD bands)
Irish Standard Communication systems for meters and remote reading of meters - Part 4: Wireless meter readout (Radio meter reading for operation in SRD bands) CEN 2013 No copying without NSAI permission
More informationTextiles Tests for colour fastness
BRITISH STANDARD BS EN ISO 105-E01:1996 Incorporating Technical Corrigendum No. 1 Textiles Tests for colour fastness Part E01: Colour fastness to water The European Standard EN ISO 105-E01:1996, has the
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10223-1:2012 Steel wire and wire products for fencing and netting - Part 1: Zinc and zinc-alloy coated steel barbed wire EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 14723:2002 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves Petroleum and natural gas industries - Pipeline transportation systems
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 14457:2012 Dentistry - Handpieces and motors (ISO 14457:2012) EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN ISO 14457:2012 sisaldab Euroopa standardi EN
More informationEESTI STANDARD EVS-EN :2009
EESTI STANDARD EVS-EN 15037-2:2009 Betoonvalmistooted. Tala-plokk-vahelaesüsteemid. Osa 2: Betoonblokid Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks EESTI STANDARDI
More informationEESTI STANDARD EVS-EN :2009
EESTI STANDARD Radio frequency and coaxial cable assemblies -- Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN 60966-3-
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15037-2:2009+A1:2011 Betoonvalmistooted. Tala-plokk-vahelaesüsteemid. Osa 2: Betoonblokid Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks EESTI
More informationErgonomiska principer vid utformning av arbetssystem (ISO 6385:2004) Ergonomic principles in the design of work systems (ISO 6385:2004)
SVENSK STANDARD SS- Fastställd 2004-02-27 Utgåva 1 Ergonomiska principer vid utformning av arbetssystem (ISO 6385:2004) Ergonomic principles in the design of work systems (ISO 6385:2004) ICS 13.180 Språk:
More informationGummi- eller plastbelagda tyger Bestämning av rivhållfasthet Del 1: Metoder med konstant hastighet (ISO :2003)
SVENSK STANDARD SS-EN ISO 4674-1 Fastställd 2003-09-26 Utgåva 1 Gummi- eller plastbelagda tyger Bestämning av rivhållfasthet Del 1: Metoder med konstant hastighet (ISO 4674-1:2003) Rubber- or plastics-coated
More informationHexagon socket set screws with cup point (ISO 4029:2003)
SVENSK STANDARD SS-EN ISO 4029:2004 Fastställd 2004-01-09 Utgåva 1 Fästelement Stoppskruvar med sexkantshål och skål (ISO 4029:2003) Hexagon socket set screws with cup point (ISO 4029:2003) ICS 21.060.10
More informationTandvård Roterande instrument Del 2: Putsborr (ISO :2003) Dentistry Rotary bur instruments Part 2: Finishing burs (ISO :2003)
SVENSK STANDARD SS-EN ISO 3823-2:2004 Fastställd 2004-10-08 Utgåva 1 Tandvård Roterande instrument Del 2: Putsborr (ISO 3823-2:2003) Dentistry Rotary bur instruments Part 2: Finishing burs (ISO 3823-2:2003)
More informationCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 9431:1999
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 9431 July 1999 ICS 01.100.00 English version Construction drawings - Spaces for drawing and for text, and title blocks on drawing sheets (ISO
More informationEnglish version. Audio, video and similar electronic apparatus - Safety requirements
EUROPEAN STANDARD EN 60065/A12 NORME EUROPÉENNE EUROPÄISCHE NORM February 2011 ICS 97.020 English version Audio, video and similar electronic apparatus - Safety requirements Appareils audio, vidéo et appareils
More informationThis document is a preview generated by EVS
TECHNICAL REPORT CLC/TR 50579 RAPPORT TECHNIQUE TECHNISCHER BERICHT June 2012 ICS 91.140.50 English version Electricity metering equipment (a.c.) - Severity levels, immunity requirements and test methods
More informationHot rolled square steel bars for general purposes Dimensions and tolerances on shape and dimensions
BRITISH STANDARD BS EN 10059:2003 Hot rolled square steel bars for general purposes Dimensions and tolerances on shape and dimensions The European Standard EN 10059:2003 has the status of a British Standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 3098-3:2000 Technical product documentation - Lettering - Part 3: Greek alphabet EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN ISO 3098-3:2000 sisaldab
More informationSVENSK STANDARD SS-EN ISO 2692:2007
SVENSK STANDARD SS-EN ISO 2692:2007 Fastställd 2007-01-08 Utgåva 1 Geometriska produktspecifikationer (GPS) Form- och lägetoleranser Max materialkrav (MMR), min materialkrav (LMR) och reciprocitet (RPR)
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 61097-1:2007 Global maritime distress and safety system (GMDSS) -- Part 1: Radar transponder - Marine search and rescue (SART) - Operational and performance requirements, methods
More informationEnglish version. Steel and steel products Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997)
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 377 July 1997 ICS 77.040.10; 77.140.01 Descriptors: See ISO document English version Steel and steel products Location and preparation of samples
More informationEESTI STANDARD EVS-EN :2010
EESTI STANDARD EVS-EN 60444-11:2010 Measurement of quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonance frequency fl and the effective load capacitance
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1168:2006+A2:2009 Betoonvalmistooted. Õõnespaneelid KONSOLIDEERITUD TEKST Precast concrete products - Hollow core slabs CONSOLIDATED TEXT EESTI STANDARDI EESSÕNA NATIONAL FOREWORD
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 62127-2:2007 Ultrasonics - Hydrophones -- Part 2: Calibration for ultrasonic fields up to 40 MHz Ultrasonics - Hydrophones -- Part 2: Calibration for ultrasonic fields up to 40 MHz
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 62002-2:2008 Mobile and portable DVB-T/H radio access -- Part 2: Interface conformance testing Mobile and portable DVB-T/H radio access -- Part 2: Interface conformance testing EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) EVS-EN ISO 1938-1:2015 EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 847-1:2013 Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 847-1:2013
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12839:2012 Betoonvalmistooted. Piirdeaedade elemendid Precast concrete products - Elements for fences EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 12839:2012
More informationFästelement Sextandhålsskruvar med cylinderhuvud (ISO 14580:2001) Hexalobular socket cheese head screws (ISO 14580:2001)
SVENSK STANDARD SS-EN ISO 14580 Fastställd 2001-09-28 Utgåva 1 Fästelement Sextandhålsskruvar med cylinderhuvud (ISO 14580:2001) Hexalobular socket cheese head screws (ISO 14580:2001) ICS 21.060.10 Språk:
More informationMunkaanyag
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16555-4 December 2014 ICS 03.100.40; 03.100.50; 03.140 English Version Innovation management - Part 4: Intellectual property
More informationSVENSK STANDARD SS-EN Flexibla tätskikt Bestämning av längd, bredd och rakhet Del 1: Bitumenbaserade tätskikt för tak
SVENSK STANDARD SS-EN 1848-1 Fastställd 2000-05-26 Utgåva 1 Flexibla tätskikt Bestämning av längd, bredd och rakhet Del 1: Bitumenbaserade tätskikt för tak Flexible sheets for waterproofing Determination
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 9300-003:2012 Aerospace series - LOTAR - Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 003: Fundamentals and concepts
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12758:2011 Klaas ehituses. Klaasing ja õhuheli isolatsioon. Toote kirjeldused ja omaduste määramine Glass in building - Glazing and airborne sound insulation - Product s and determination
More informationSVENSK STANDARD SS-EN :2004. Stållinor Säkerhet Del 10: Spirallinor för allmänna byggnadsändamål
SVENSK STANDARD SS-EN 12385-10:2004 Fastställd 2004-01-09 Utgåva 1 Stållinor Säkerhet Del 10: Spirallinor för allmänna byggnadsändamål Steel wire ropes Safety Part 10: Spiral ropes for general structural
More informationThis document is a preview generated by EVS
EESTI STANDARD Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards EESTI STANDARDI EESSÕNA Käesolev
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 11426:2016 Jewellery - Determination of gold in gold jewellery alloys - Cupellation method (fire assay) (ISO 11426:2014) EVS-EN ISO 11426:2016 EESTI STANDARDI EESSÕNA NATIONAL
More informationSVENSK STANDARD SS-EN
SVENSK STANDARD SS-EN 13900-3 Fastställd 2003-02-21 Utgåva 1 Pigments and extenders Methods of dispersion and assessment of dispersibility in plastics Part 3: Determination of colouristic properties and
More informationSVENSK STANDARD SS-EN ISO
SVENSK STANDARD SS-EN ISO 12224-2 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 1999-09-30 1 1 (1+6) Copyright SIS. Reproduction in any form without permission is prohibited.
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10223-3:2013 Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes EESTI STANDARDI EESSÕNA NATIONAL FOREWORD
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 16530-2 December 2015 ICS 75.180.10 English Version integrity - Part 2: integrity for the operational phase (ISO/TS 16530-2:2014)
More informationGlass in building Special basic products Borosilicate glasses Part 1-1: Definition and general physical and mechanical properties
SVENSK STANDARD SS-EN 1748-1-1:2004 Fastställd 2004-09-17 Utgåva 1 Byggnadsglas Borosilikatglas Del 1-1: Definitioner och allmänna fysikaliska och mekaniska egenskaper Glass in building Special basic products
More informationEnglish Version. Conservation of cultural property - Main general terms and definitions concerning conservation of cultural property
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM ICS 01.040.97; 97.195 English Version DRAFT pren 15898 January 2009 Conservation of cultural property - Main general terms and definitions concerning
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 60745-2-2:2010 Käeshoitavad mootoriga elektrilised tööriistad. Ohutus. Osa 2-2: Erinõuded kruvikeerajatele ja mutrivõtmetele Hand-held motor-operated electric tools - Safety - Part
More information