Discipline Mechanical Testing Issue Date Certificate Number T-2218 Valid Until Last Amended on
|
|
|
- Claire Walsh
- 5 years ago
- Views:
Transcription
1 Last Amended on Page 1 of 5 I. TEXTILES & RELATED PRODUCTS 1. Garment / Fabric Mass per unit area (weight) of fabric ASTM D3776M-09a (Option C) ISO 3801 : 1977(Method 5) BS EN ISO 12127:1998 (20 to 1000) gsm Warp and Filling Count of Woven Fabric ASTM D 3775:2012 (100 to 1000) Threads/dm (25 to 250) tpi Maximum force & Elongation using strip method Maximum force & Elongation using grab method Maximum force seam rupturegrab method BS EN ISO :2013 BS EN ISO :1999 ASTM D BS EN ISO :1999 Failure in seam of woven fabric ASTM D 1683:M-11a Slippage Resistance of Yarns in woven fabrics: Seam Method. Tearing Strength of fabrics by falling Pendulum Type (Elmendorf Apparatus) ASTM D 434 :1995 ASTM D BS EN ISO : g to 6000 g
2 Last Amended on Page 2 of 5 Garment / Fabric Tearing Strength of fabrics by tongue (single rip method) ASTM D2261 : 2013 ISO : 2000 Bursting Strength of textile Fabrics-Diaphragm Bursting Strength Tester Method ASTM D3786/D3786M 13 ISO : kpa to 620 kpa (50 psi to 150 psi) Pilling Resistance and other related surface changes of textile fabrics : Random Tumble Pilling Tester ASTM D3512 / D3512M - 10e2 Grade 1 to 5 ICI pilling box method BSEN ISO :2001 Grade 1.0 to 5.0 Fabric Propensity to surface Fuzzing and to Pilling. Part-2: Modified Martindale Method BSEN ISO :2000 Grade 1.0 to 5.0 Abrasion Resistance of fabrics by the Martindale Method Part-2: Determination of Specimen Breakdown BS EN ISO :1999 Up to 1,00,000 Cycles Abrasion Resistance of fabrics by the Martindale Method. Part-3: Determination of Mass Loss BS EN ISO :1999 Up to 30% Holding Strength of prong Ring attached Snap Fasteners ASTM D7142: kg to 30 kg (1 lb to 60 lb)
3 Last Amended on Page 3 of 5 Stretch and Recovery(Knit) Stretch and Recovery(Woven) ASTM D2594 : 2004 (Reapproved 2012) ASTM D3107 : 2007 (0 to 50) % (0 to 50) % Resistance to Snapping and Unsnapping of Fastners ASTM D4846: 96 1 N to 250 N (0.25 lbf to 50 lbf) 2. Textiles Determination of number of threads per unit length ISO :1984 (100 to 1000) Threads/dm (25 to 250) tpi Slippage resistance of yarns at a seam in woven : Seam opening method Bursting properties of fabrics -- Part 2: Pneumatic method for determination of bursting strength and bursting distension ISO :2004 ISO : kpa to 620 kpa (50 psi to 150 psi) Identifying toys and other articles intended for use by Children under 3 years of Age which present choking, Aspiration or ingestion hazards because of small parts. 16 CFR 1501:2012 Flammability of clothing Textiles 16 CFR Part 1610:2008 (1 to 60) s
4 Last Amended on Page 4 of 5 Flammability of childrens sleepwear (FPU Testing and Photo type Testing) 16 CFR Part 1615: CFR Part 1616:2008 Upto 25.4 cm (10 Inch char length) Tension & Torque testing of Trim components 2. Textiles Accessories Sharp point in toys and other articles intended for use by children under 8 years of age Sharp metal or glass edge in toys and other articles intended for use by children under 8 years of age. 16 CFR : CFR : CFR :2012 Attachment Strength in Button / Small parts Impact Resistance of Plastic Sew -through Buttons CPSD-SL MTHD: 2012 ASTM D 5171:09a III. LEATHER AND LEATHER PRODUCTS 1. Leather Accessories Sharp point in toys and other articles intended for use by children under 8 years of age Sharp metal or glass edge in toys and other articles intended for use by children under 8 years of age 16 CFR : CFR :2012
5 Last Amended on Page 5 of 5 Attachment Strength in Button / Small parts CPSD-SL MTHD: 2012 Impact Resistance of Plastic Sew -through Buttons ASTM D 5171:09a -X-X-X-X-X-X-X-X-X-X-X-X-X-X-
Discipline Mechanical Testing Issue Date Certificate Number T-1114 Valid Until Last Amended on - Page 1 of 10
Last Amended on - Page 1 of 10 I. TEXTILES & RELATED PRODUCTS 1. Garment/Yarn/ Fabric Yarn count ASTM D 1059 ISO 7211-5 NA 2. Garment/Fabric "Mass per unit area (weight) of fabric ASTM D 3776 : 2009 ae2
The Bombay Textile Research Association, L. B. S. Marg, Ghatkopar (West), Mumbai, Maharashtra. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 7 I. TEXTILES & RELATED PRODUCTS 1. FIBRES Neps in Cotton Fibres (AFIS-N-Instrument) Physical Properties of Cotton Fibres by High Volume Instrument (HVI) 2.5% Span Length Uniformity
ASTM International Proficiency Testing and Training Programs for Textiles
ASTM International Proficiency Testing and Training Programs for Textiles www.astm.org Proficiency Testing 8/27/18 2 Benefits of Proficiency Testing - Participation helps satisfy laboratory accreditation
LESSON 15 TESTING OF TEXTILE FABRICS
LESSON 15 TESTING OF TEXTILE FABRICS STRUCTURE 15.0 OBJECTIVES 15.1 INTRODUCTION 15.2 FABRIC THICKNESS 15.3 WEIGHT OF THE FABRIC 15.4 THREAD DENSITY OF A WOVEN FABRIC 15.5 CREASE RECOVERY OF A FABRIC 15.6
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17072-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.04.2018 to 24.02.2020 Holder of certificate: Weber
HP-B1 Bedding, Pillow, Sheets, Blankets, Throws, Comforters Test Protocol Exclude Down Fill
Analytical California Proposition 65* ph Value Formaldehyde quantitative test* Phthalates - Plastic Only Total Lead Content Azo Dye Analysis*^ (Test all color fabric except white and PFD textile fabric)
GP-S1 Sleepwear/Nightwear Garment Test Protocol Nightdresses, Dressing Gowns, Pajamas or garments in similar nature
ALL MATERIALS / COMPONENTS MUST COMPLY WITH PREVAILING AFIRM RSL REQUIREMENTS Analytical California Proposition 65 * Visual Inspection Citation: California Health & Safety Code, Sec. 25210.9-25210.12 All
DILLARD'S INC TEST PROTOCOL FOR DILL USA- (V50) OUTERWEAR
By/Date: Page 1 of 8 SCOPE: This protocol is applicable to outwear for children / adult. SUPPLEMENTRY PROTOCOL Note: dditional cost, sample size and turn around time may be required if testing to one or
Fibre Technology Laboratory
Fibre Technology Laboratory Test code T 001 T 002 Description of test Determination of oil/wax content Analysis of fibre mixtures/blends Standard Test Method IWS TM 136 One fibre ISO1833: 2006 Two fibres
Flammability. ACT Voluntary Performance Guidelines. The measurement of a fabric s performance when it is exposed to specific sources of ignition.
ACT Voluntary Performance Guidelines for Flammability and four aspects of fabric durability Wet & Dry Crocking, Colorfastness to Light, Physical Properties, and Abrasion make fabric specification easier.
Technical Training International Textiles Training September 2018 Ellen Roaldi Instructor
Technical Training International Textiles Training September 2018 Ellen Roaldi Instructor www.astm.org D3512 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics:
TIME SCHEDULE OBJECTIVES. On completion of this Course students should be able to understand the
COURSE TITLE : TEXTILE TESTING & QUALITY ASSURANCE COURSE CODE : 4109 COURSE CATEGORY : A PERIODS/WEEK : 5 PERIODS/SEMESTER : 90 CREDITS : 5 TIME SCHEDULE MODULE TOPIC PERIODS I Elements of Statistics,
A PRINCIPLE 2. CHECK LIST C.1 Standard Accessories 4 C.2 Optional Accessories 5
CONTENT A PRINCIPLE 2 B C D E F G H I HOW TO SET UP B.1 Unpacking 3 B.2 Setting up the Tester 3 CHECK LIST C.1 Standard Accessories 4 C.2 Optional Accessories 5 EXCHANGE UPPER GRIPS AND LOWER CLAMP D.1
Textile Testing Laboratories Department of Textile & Clothing Technology University of Moratuwa
Textile ing Laboratories Department of Textile & Clothing Technology University of Moratuwa September 2006 Tel. No : 94-11-2640480, 94-11-2650301 Ext. 6000 Fax : 94-11-2651787 E-mail : testlabs@textile.mrt.ac.lk
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Textile Innovation House Contact: Mark Jones 1 Lyons Road Tel: +44 (0) 161 50 50 650 Trafford Park E-Mail: mark.jones@ifs-labs.com M17 1RN
PHYSICAL QUALITY EVALUATION LABORATORY
PHYSICAL QUALITY EVALUATION LABORATORY Scope : 1) Testing of Various types of Fibres, Silver, Roving, Yarn, Threads, Rope, Fabric, Garment, Carpets, Pile fabrics, Netting Fabric, Blankets, Filter fabrics,
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
Fundamentals of Textile Testing
Fundamentals of Textile Testing IFAI Expo 2017 New Orleans, LA Jan P. Ballard Zeis Textiles Extension College of Textiles North Carolina State University General Testing Information Find 4 differences
GESTER INTERNATIONAL CO.,LTD
GT-C09 Snap Button Tester The aim of snap button test is defined responsibility of garment manufacturer, make sure button, push-button and fixed accessories can fixed on garments suitable. To avoid button
GP1 General Garment Test Protocol Exclude Leather Garment, Outerwear, Sleepwear Nightwear, Swimwear and Sweater
GP1 General Garment Test Protocol ALL MATERIALS / COMPONENTS MUST COMPLY WITH PREVAILING AFIRM RSL REQUIREMENTS Analytical California Proposition 65 * Visual Inspection Citation: California Health & Safety
GESTER INTERNATIONAL CO.,LTD TEL: FAX:
Shoes Accessories Testing Equipment GT-K19 Velcro Fatigue Tester This tester is applicable for repeatedly open and close motion for touch and close fasteners and velcro tapes. DIN 3415, BS EN ISO 22776,
THE SYNTHETIC AND ART SILK MILLS' RESEARCH ASSOCIATION (SASMIRA)
Accredited Laboratory A2LA has accredited THE SYNTHETIC AND ART SILK MILLS' RESEARCH ASSOCIATION (SASMIRA) Worli, Mumbai, INDIA for technical competence in the field of Mechanical Testing Thislaboratory
ISO INTERNATIONAL STANDARD. Textiles Determination of fabric propensity to surface fuzzing and to pilling Part 2: Modified Martindale method
INTERNATIONAL STANDARD ISO 12945-2 First edition 2000-07-01 Textiles Determination of fabric propensity to surface fuzzing and to pilling Part 2: Modified Martindale method Textiles Détermination de la
Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester 1
Designation: D3511/D3511M 13 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester 1 This standard is issued under the fixed designation
DILLARD'S INC TEST PROTOCOL FOR DILL USA- (V38) GLOVES, MITTENS, HATS, SCARF
DILLD'S INC TEST POTOCOL FO GLOVES, MITTENS, HTS, SCF eviewed By/Date: Page 1 of 7 Criteria Notes esult ating SCOPE: This protocol is applicable for testing of gloves,mittens,hats and scarf for children
Flammability ACT Voluntary Performance Guidelines
The following guide was created to simplify highly technical testing information so that it can be understood and useful when selecting and specifying fabrics for particular applications. For complete
Standard Guide to International Test Methods Associated with Textile Care Procedures 1
Designation: D 6322 00 e1 Standard Guide to International Test Methods Associated with Textile Care Procedures 1 This standard is issued under the fixed designation D 6322; the number immediately following
TECHNICAL BULLETIN Weston Parkway, Cary, North Carolina, Telephone (919) COTTON INCORPORATED PRODUCT EVALUATION LABORATORY
TECHNICAL BULLETIN 6399 Weston Parkway, Cary, North Carolina, 27513 Telephone (919) 678-2220 FQR 1001 (FC 1001) PRODUCT EVALUATION LABORATORY 2006 Cotton Incorporated. All rights reserved; America s Cotton
TEXTILE, LEATHER, FOOTWEAR
TEXTILE, LEATHER, FOOTWEAR AND FASHION ACCESSORIES Yo u r i n d u s t r y, o u r f o c u s QUALITY ASSURANCE & CONTROL Ef_CPT_TextileLeather_2018v01.1 Index Table of contents Your Industry, Our Focus Industries
DRAFT TANZANIASTANDARD
DRAFT TANZANIASTANDARD TDC (6085) P Second Edition Textiles Woven, non-woven, Knitted and Lace Household Curtain and Drapery fabrics Specifications Textiles Woven, non-woven, Knitted and Lace Household
"X" for Express Testing
Submit Samples to: Manufacturing Solutions Center Lab 0 Conover Station SE Conover NC 86 Please fill out items in BLUE Select the tests to perform; Enclose the correct number of samples Company Billing
KS K ISO : (1 ~ 100) % KS K ISO : (0.01 ~ 2.00) m KS K ISO 6330 :
KT345 (2/27) 1. KS K 0590 : 2008 KS K ISO 129452 : 2008 2 KS K ISO 163221 : 2007 1 (1 ~ 180) KS K ISO 163222 : 2009 2 (1 ~ 100) % KS K ISO 163223 : 2009 3 (1 ~ 100) % KS K ISO 22198 : 2009 (0.01 ~ 2.00)
Technical Specifications
Schedule B Technical Specifications Gujarat Energy Transmission Corporation Limited Year 2013-15 Content 1. General Guidelines for Sourcing of Fabric.02 2. Fabric Specifications.....03 3. List of Fabric
Technical Specifications
Schedule B Technical Specifications Gujarat Energy Transmission Corporation Limited Year 2015-17 E-2472 Content 1. General Guidelines for Sourcing of Fabric.02 2. Fabric Specifications.....03 3. List of
PUNCTURE AND TEAR OF WOVEN FABRICS
PUNCTURE AND TEAR OF WOVEN FABRICS Dr. Anthony Primentas Associate Professor Department of Textile Engineering, ΤΕΙ of Piraeus ABSTRACT The quite often contact of textile goods with sharp objects, results
Testing and Services
Testing and Services Effective September 2017 August 2018 Mailing Address: Box 45019 Lubbock, Texas 79409-5019 Shipping Address: 1001 East Loop 289 Lubbock, Texas 79403-6518 Telephone: Fax: Email: Web:
CHAPTER V SUMMARY AND CONCLUSIONS
CHAPTER V SUMMARY AND CONCLUSIONS The new developments in the textile manufacture with various types of blends offer varieties in the market. Consumers seek not only fashionable but also have become conscious
Intertek Testing Fee Structure for Vince
Knit Garment and Fabric Testing Item Fabric Garment Additional colorway Dimensional Stability: Laundering or Dry Cleaning Appearance after Laundering or Dry Cleaning Skewing Colorfastness to: Laundering
Orbitor PILLING & SNAGGING TESTER
PRODUCT UPDATE Extraordinary Testing Solutions = Orbitor PILLING & SNAGGING TESTER A consistent and reliable way to test the pilling and snagging properties of woven and knitted fabrics. With the James
EDICT ± OF GOVERNMENT
EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 12947-1 First edition 1998-12-15 Textiles Determination of the abrasion resistance of fabrics by the Martindale method Part 1: Martindale abrasion testing apparatus Textiles
Intertek India Private Limited, G3, Ground Floor, Akruti Corporate Park, L.B.S. Marg, Kanjurmarg (West), Mumbai, Maharashtra
Last Amended on 15.06.2015 Page 1 of 8 Range ing / I. TEXTILE & TEXTILE AUXILIARIES 1. Textile & Garment Colour Fastness to Washing ISO 105 C10: 2006 ISO 105 C06: 2010 AATCC 61: 2013 GB/T 3921: 2008 Colour
GESTER. Universal Testing Machine (Dual Column) GT-K01. Product Presentation. Application. Test Sample.
Product Presentation Universal Testing Machine (Dual Column) GT-K01 Application This tester is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other
Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad 1
Designation: D 3514 05 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad 1 This standard is issued under the fixed designation D 3514; the
Comparative Study on the Effect of Sewing Thread Count for Different Types of Seam Strength
Available onlinewww.ejaet.com European Journal of Advances in Engineering and Technology, 2016, 3(10):1-7 Research Article ISSN: 2394-658X Comparative Study on the Effect of Sewing Thread Count for Different
Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester 1
Designation: D 3512 05 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester 1 This standard is issued under the fixed designation
Fabric and Testing Manual EU Own Buy Apparel
Fabric and Testing Manual EU Own Buy Apparel Version 3, August 17 Contents Section Product Section 1 Care Symbols Section 2 Labelling Section 3 Reduced Testing Procedure Section 4 Testing Tables and Assessment
Woven Steel Wire Fence Type-47. Under the state specification for fencing, ASTM A 116 is called out.
Woven Steel Wire Fence Type-47 Under the state specification 710.02 for fencing, ASTM A 116 is called out. Go to the steel and fencing certification manual for more information about the basic properties
DRAFT EAST AFRICAN STANDARD
DEAS 224: 2016 ICS ICS 59.080 DRAFT EAST AFRICAN STANDARD Cotton Khanga Specification EAST AFRICAN COMMUNITY EAC 2016 Second Edition 2016 EAS 224: 2016 Copyright notice This EAC document is copyright-protected
This document is a preview generated by EVS
EESTI STANDARD EVS-EN 14465:2004 Textiles - Upholstery fabrics - Specification and methods of test Textiles - Upholstery fabrics - Specification and methods of test EESTI STANDARDIKESKUS EESTI STANDARDI
GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T4808.2-2008 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 9.080.30 W04 GB/T 4802.2-2008 Replacing
Standard Test Procedures Manual
STP 215-4 Standard Test Procedures Manual GEOTEXTILE & GEOGRIDS BURST STRENGTH - BALL BURST TEST 1. SCOPE 1.1. Description of Test This method describes the procedure for determining the bursting strength
Product Testing Protocols: Apparel
Product Testing Protocols: Apparel Issued September 6, 2016 Revised May 25, 2017 Sampling Requirements Fabric and Pre-Production Testing (Required by Bluestem) One pre-production garment made in the production
DETAILED CONTENTS. Practical Exercises
84 6.1 KNITTED DESIGN 4-4 RATIONALE The aim of this subject is to impart knowledge and skills to the students regarding various types of knits and their use in the textile design as they may have to work
FLAT WOVEN, PILE WOVEN AND PRESSED FELT APPAREL FABRICS. Woolmark, Woolmark Blend or Wool Blend labelling may be applied to woven fabric:
SPECIFICATION SF-2: 2016 FLAT WOVEN, PILE WOVEN AND PRESSED FELT APPAREL FABRICS FABRICS Woolmark, Woolmark Blend or Wool Blend labelling may be applied to woven fabric: Woolmark Blend and Wool Blend labelling
TEST REPORT. Test Report No. : Report Date : WOAH September 8, 2016
TEST REPORT Applicant: Attention: E-Mail: Raxon / Vescom 261 Fifth Avenue Rm 2301 New York, NY 10010 Christine Wekilsky cwekilsky@raxon.com Sample Description as Declared : Description : Balta Solid Upholstery
TEARING BEHAVIOUR OF FABRIC USING VARIOUS TESTING
TEARING BEHAVIOUR OF FABRIC USING VARIOUS TESTING C.W. Kan 1, K.F. Choi 1, T. Hua 1, R.H. Yang 2, Q. Zhang 3, S.Y. Wang 4 1 The Hong Kong Polytechnic University, Faculty of Applied Science and Textiles,
PROPERTY ANALYSIS OF SKIRTS MADE FOR READY-TO-WEAR COLLECTION.PART I: TENSILE TESTING OF SEWING THREADS AND WOVEN FABRICS
PROPERTY ANALYSIS OF SKIRTS MADE FOR READY-TO-WEAR COLLECTION.PART I: TENSILE TESTING OF SEWING THREADS AND WOVEN FABRICS ABSTRACT Rodica Harpa Gheorghe Asachi Technical University of Iasi, Romania rodica_harpa@yahoo.com
KENYA STANDARD DKS 1062:2017 ICS Infants outer wear garments Specification
KENYA STANDARD DKS 1062:2017 ICS 61.020 Infants outer wear garments Specification TECHNICAL COMMITTEE REPRESENTATION The following organizations were represented on the Technical Committee: Moi University,
tbs TDC3 (5614)P 3 Draft Tanzania Standard Textiles Towels Specifications TANZANIA BUREAU OF STANDARDS
tbs TDC3 (5614)P 3 Draft Tanzania Standard Textiles Towels Specifications TANZANIA BUREAU OF STANDARDS 0. Foreword This second edition of this Draft Tanzania Standard has been prepared to help manufacturers
Seam Performance of the Inseam of a Military Trouser in Relation to Garment Fit
Textiles and Light Industrial Science and Technology (TLIST) Volume 3, 2014 DOI: 10.14355/tlist.2014.03.006 http://www.tlist-journal.org Seam Performance of the Inseam of a Military Trouser in Relation
Datasheet. Variable Impact Tester. Elcometer 1615
Variable Impact Tester This simple to use gauge is ideal for evaluating the resistance of a coating to impact (elongation, cracking or peeling), and is suitable for use on both direct and indirect test
Copyright 2009 Fairchild Books
2/20/12 Copyright 2009 Fairchild Books Beyond Design By Sandra J. Keiser and Myrna B. Garner All rights reserved. No part of this presentation covered by the copyright hereon may be reproduced or used
Elasticity & Deformation. Elcometer 1615 Variable Impact Tester. elcometer.com 1
Variable Impact Tester elcometer.com 1 Variable Impact Tester This simple to use gauge is ideal for evaluating the resistance of a coating to impact (elongation, cracking or peeling), and is suitable for
TEST MATERIALS Standard Materials for Standards Based Testing
TEST MATERIALS Standard Materials for Standards Based Testing Consistent Quality Batch after Batch. Test After Test. Each lot of test materials supplied by SDL Atlas is thoroughly tested to ensure conformity
Preventive Maintenance and Calibration Program:
TEXTILES Industry Product Guide Preventive Maintenance and Calibration Program: The IDM Preventive Maintenance and Calibration (PM&C) program has been designed to make the maintenance and calibration of
Pillow Case 3 Styles
Pillow Case 3 Styles Materials Needed: Fabric (amount based off your design and size) Fabric to buy Standard Queen King Tri-Color Cuff Main: ¾ yard Cuff: ¼ yard Trim: ¼ yard Main: ¾ yard Cuff: ¼ yard Trim:
SEWING GUIDELINE FOR KNITTED TEXTILES
SEWING GUIDELINE FOR KNITTED TEXTILES version 041016 KNITS KNITS VERSUS WOVEN In the world of upholstery, woven textiles are the standard used surface material. Although knits are commonly known in fashion
URBN Fabric Manual (Version 2 March 2016)
URBN Fabric Manual (Version 2 March 2016) Introduction: The purpose of this manual is to give instructions to our fabric mills and garment vendors on the fabric requirements, mandatory testing requirements,
EDICT ± OF GOVERNMENT
EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal
BURSTING STRENGTH TESTER
BURSTING STRENGTH TESTER UBS 35DGA-TS / UBS 70DGA-TS Marketed by: SAURASHTRA SYSTOPACK PVT. LTD. Serviced by: SAURASHTRA MARKETING CORPORATION Manufactured by: Ubique, Pune Bursting Strength Tester Bursting
ISO INTERNATIONAL STANDARD. Textiles Determination of fabric propensity to surface fuzzing and to pilling Part 1: Pilling box method
INTERNATIONAL STANDARD ISO 12945-1 First edition 2000-12-15 Textiles Determination of fabric propensity to surface fuzzing and to pilling Part 1: Pilling box method Textiles Détermination de la propension
FLAT WOVEN, PILE WOVEN AND PRESSED FELT APPAREL PRODUCTS
SPECIFICATION AW-1: 2016 FLAT WOVEN, PILE WOVEN AND PRESSED FELT APPAREL PRODUCTS PRODUCTS The Woolmark, Woolmark Blend or Wool Blend logos may be applied to the following made from flat woven fabric:
PILLING CAPACITY ASSESSMENT OF COTTON KNITTED FABRICS AFTER FINISHING PROCESS
10 INTERNATIONAL SCIENTIFIC CONFERENCE 19 20 November 2010, GABROVO PILLING CAPACITY ASSESSMENT OF COTTON KNITTED FABRICS AFTER FINISHING PROCESS Macsim Mihaela *Gheorghe Asachi Technical University, Faculty
TECHNICAL SPECIFICATIONS OF GOODS REQUIRED
Annex 1 OF GOODS REQUIRED LOT 01 UNIFORM BOOTS FOR MALE AND FEMALE NON-COMMISSIONED OFFICERS Technical Specifications Style Contents Sizes Height: 8-inches Lace type with eight to ten eyelets or lace and
Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics 1
Designation: D 1683 04 Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics 1 This standard is issued under the fixed designation D 1683; the number immediately following the designation
This document is a preview generated by EVS
EESTI STANDARD EVS-EN 14976:2005 Textiles - Mattress ticking - Specifications and test methods Textiles - Mattress ticking - Specifications and test methods EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
EFFECT OF SEWING PARAMETERS AND WASH TYPE ON THE DIMENSIONAL STABILITY OF KNITTED GARMENTS
EFFECT OF SEWING PARAMETERS AND WASH TYPE ON THE DIMENSIONAL STABILITY OF KNITTED GARMENTS Mumtaz Hasan Malik 1, Zulfiqar Ali Malik 1, Tanveer Hussain 1, Muhammad Babar Ramzan 2 1 Faculty of Engineering
DRAFT UGANDA STANDARD
DRAFT UGANDA STANDARD DUS DEAS 222 First Edition 2016-mm-dd Knitted polyester/cellulosic blended fabric Specification PUBLIC REVIEW DRAFT Reference number DUS DEAS 222: 2016 UNBS 2016 DUS DEAS 222:2016
DILLARD'S MINIMUM CONSTRUCTION GUIDELINES ADDENDUM FOR LEATHER & SUEDE GOODS
DILLARD'S MINIMUM CONSTRUCTION GUIDELINES ADDENDUM FOR LEATHER & SUEDE GOODS This addendum refers to the minimum construction specifications to be used in the production of Dillard's Private Brand Leather
product specification sheet Subtitle (optional)
Title BuzziMilk product specification sheet Subtitle (optional) Epudicip This documents susantum contains aliaersperum technical voluptibus mos information ad endi about od quibus. the BuzziMilk Stool,
Vzorník potahových materiálů HAG 2018
HÅG Colour and Fabrics Vzorník potahových materiálů HAG 2018 Decorative stitching Decorative stitching can truly add the little extra to your chair. The 10-colour thread program is available on all textiles
Sewing Vocabulary & Equipment
Sewing Vocabulary & Equipment 1. Basting Stitch Long, temporary stitches used to hold pieces of fabric together. (Changed by twisting the stitch length knob.) Regular Stitch Length Basting Stitch Length
Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method 1
Designation: D 1422 99 Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method 1 This standard is issued under the fixed designation D 1422; the number immediately following the
Department of Textile & Leather
Department of Textile & Leather No Products Standard 1 Specifications of acrylic yarns for machine made floor coverings (moquette) 2 Specifications for wool - yarn and wool mixture with other fibers used
Reinforced with bar tacks at fly. Straps at hemline for adjustment
Technical flat Page: 1 of 12 Elastic at the sides of waistband Darts at back Reinforced with bar tacks at fly Pocket left side with pleat at back Straps at hemline for adjustment Front with zipper at fly
Fiberglass vs. Polyester: Properties of Coated Yarns White Paper
Fiberglass vs. Polyester: Properties of Coated Yarns White Paper There has been much debate in the solar shading textile industry over whether a fiberglass core fabric or a polyester core fabric is superior.
Study on Properties Analysis of Knitwear After Acid Wash
AASCIT Communications Volume 3, Issue 2 March 1, 2016 online ISSN: 2375-3803 Study on Properties Analysis of Knitwear After Acid Wash Elias Khalil Department of Apparel Engineering, Bangladesh University
Product Specification Sheet Subtitle (optional)
Title BuzziSpot Product Specification Sheet Subtitle (optional) Epudicip This document susantum contains aliaersperum technical voluptibus mos information ad endi about od quibus. the BuzziSpot Cium voluptatur?
Minimum Construction Standards Window Treatments. Kohl s Department Stores DATE(03/28/2018)Page 1
Minimum Construction Standards Window Treatments Kohl s Department Stores DATE(03/28/2018)Page 1 Kohl s Window Treatments Minimum Construction Standards Overview The acceptance of an order placed by Kohl
Annexure A Technical Specifications
Annexure A Technical Specifications SL.NO. CONTENTS 1. SCOPE 2. RELATED SPECIFICATION &DOCUMENT 3. WORKMANSHIP AND FINISH D:\Documents and Settings\SPShah333\Desktop\60188\60188 Annexure A.doc Page 1 1.
MOUNTAIN VIEW SCHOOL DISTRICT. Clothing Management I
MOUNTAIN VIEW SCHOOL DISTRICT Clothing Management I 00 Curriculum Content Frameworks Clothing Management I Grade Levels: 9, 0,, Course Code: 900 Prerequisite: None Course Description: Experience in the
Reinforced with bar tacks at fly. Slit at hemline
Technical flat Size: 2S - M - 6L Page: 1 of 11 Elastic with logo at sides Darts at back Reinforced with bar tacks at fly Pocket left side with pleat at back Slit at hemline Front with zipper at fly Description:
I96-A09. On-line Measurement of Fabric Mechanical Properties for Process Control
I96-A09 Page 1 I96-A09 On-line Measurement of Fabric Mechanical Properties for Process Control Investigators: Sabit Adanur, Yasser Gowayed, Howard Thomas (Auburn Univ.) Tushar Ghosh (NC State Univ.) Graduate
1 WEAVE Plain. YARN WRAP EC9 430tex ETG 11.6 (tex) WEFT EC9 430tex ETG 11.6
Fiber 2025 Fiber 2025 Fiberglass 2025 is woven by high quality E-glass textured yarn, and then pass through a oven with high temperature in order to burn off the sizing and other organic elements in the
BuzziTotem Product Specification Sheet
BuzziTotem Product Specification Sheet This document contains technical information about the BuzziTotem www.buzzi.space Free standing acoustic pillar BuzziTotem is a completely new family being introduced
Short Communications. Fabric pilling Objective measurement system
Indian Journal of Fibre & Textile Research Vol. 41, September 2016, pp. 338-343 Short Communications Fabric pilling Objective measurement system Vijay M Mayekar 1 & R P Nachane 2, a 1 Department of Physics,
1. DESCRIPTION APPLICABLE DOCUMENTS PRODUCT REQUIREMENTS MANUFACTURING QUALITY ASSURANCE... 20
1(23) M7085-107010-1 Carrying bag 2000 TABLE OF CONTENTS 1. DESCRIPTION... 2 2. APPLICABLE DOCUMENTS... 3 3. PRODUCT REQUIREMENTS... 5 4. MANUFACTURING... 12 5. QUALITY ASSURANCE... 20 6. PACKING INSTRUCTIONS...
Coating of Core Yarn. An Alternative Method of Decreasing the Strip-back Phenomenon of Core-spun Yarns
Mohsen Shanbeh, Behnaz Baghaei, Samira Alidadi, Abbas Tabibi Textile Engineering Department, Isfahan University of Technology Isfahan 84156-83111, Iran E-mail: mshanbeh@cc.iut.ac.ir Coating of Core Yarn.
EMBROIDERING; TUFTING (making non-woven fabrics D04H; sewing D05B)
D05C EMBROIDERING; TUFTING (making non-woven fabrics D04H; sewing D05B) The embroidering and tufting machines, the embroidered or tufted products, and the base fabrics and inserts. Details of garments