DIGITAL SOUND EFFECTOR
|
|
|
- Richard Skinner
- 6 years ago
- Views:
Transcription
1 CAT. NO. : BSE - 1 One chip reverb solution that is compact, easy to use, and quite powerful Built in DRAM eliminates the need for wide bus connections to external RAM and the choice of built in programs. & SHIELD Features 16 internal ROM programs consisting of halls, rooms, plates, delays, chorus, flange, vocal cancel, and rotary speaker emulation. 32k location DRAM provides over 0.68s of delay at 48kHz sampling frequency. Internal crystal oscillator circuit eliminates need for discrete external passive components. Internal voltage regulators allow operation from 5.5V down to 3.0V VDD. Internal 1000pF bypass capacitor to reduce voltage swings at the rails. Applications Personal stereos with reverb functions Extremely portable guitar effects boxes Karaoke machines utilizing the vocal cancel program Hardware reverb effects for computer sound cards Ambience settings for car stereos NEW Terminal connection 1. Left output 2. Right output 3. Analog ground 4. Input 5. N.C 6. Digital ground V V 9. Gray cord Gray cord Gray cord Gray cord N.C 14. N.C 15. N.C V 13
2 CAT. NO. : BSE - 2 Electrical Specification Mounting Type & SHIELD Configuration : Left and Right AD-DA conversion : 24Bit S/N ratio(a-weight) : 96dB Dynamic range : 107dB Frequency response : 20Hz-20kHz Max. Input voltage : 4.0Vp-p Input impedance : 160kohm Max output voltage : 4.0Vp-p Min Output load res : 5kohm Power supply : +5V, +/-15V Current consumption : 120mA BTSE - 16 G BTSE - 16 GV Horizontal mount Vertical mount Dimensions BTSE - 16 G BTSE - 16 GV 14
3 CAT. NO. : BSE - 3 Recommended Circuits & SHIELD V +15V 15
4 CAT. NO. : BSE - 4 & SHIELD Internal Programs The BTSE-16G comes with 16 internal ROM programs ready to go, utilizing the skills and techniques of the Belton Reverb. Co. By setting the chip to internal mode, the four program pins may be used to select between the different algorithms. Program List Prog Name Description 0110 Hall 1 Bright hall reverb for drums, guitars, and vocals Hall 2 Warm hall for acoustic guitars, pianos, and vocals Room 1 Hardwood studio for acoustic instruments Room 2 Ambience for acoustic mixes and synth sounds Room 3 Warm room for guitars and rhythm instruments Plate 1 Classic plate reverb for lead vocals and instruments Plate 2 Sizzling bright plate reverb for vocals and instruments Plate 3 Short vintage plate reverb for snares and guitars Chorus Stereo chorus for guitars and pianos Flange Stereo flanger for jet wash effects Delay 1 125ms slapback delay for vocals and guitars Delay 2 190ms deay for percussive arpeggios Chorus/Room 1 Chorus with reverb for guitars, synths, and pianos Chorus/Room 2 Auto-wah guitar effect with reverb for lead instruments Vocal Cancel Removes lead vocals from many stereo recordings Rotary Speaker Rotary speaker emulation for organs and guitars. The unusual ordering of the programs allows a 16-position rotary switch s Gray code output to be connected to the program pins. Suggested Ordering Procedure To specify the Digital Sound Effector specification, please compose desired part numbers from data below and fill in the specification you desire in the following square. Example BTSE - 16 G BelTon Sound Effector 16 Internal ROM H V Horizontal Mount Vertical Mount General spec. 16
5 CAT. NO. : BSE - 5 Suggested Connections & SHIELD Block Diagram 17
6 CAT. NO. : BSE - 6 Electrical Characteristics and Operating Conditions & SHIELD Parameter Description Condition Min Typ Max Units Electrical Characteristics and Operating Conditions VDD Supply Voltage V IDD Supply Current : SCR ma Gnd Ground V FS Sample rate khz Temp Temperature Output (DigOut, SysClk, BitClk, WordClk) VOH Logical 1 output voltage Unloaded 0.9 VDD VDD - V VOL Logical 0 output voltage Unloaded VDD V IOH Logical 1 output current VDD=5V VO=4.5V ma IOL Logical 0 output current VDD=5V VO=0.4V ma Inputs (DigIn, Int Ext, Prog0/Sdata, Prog1/SCIK, Prog2, Prog3, Reset) VIH Logical 1 input voltage VDD V VIL Logical 0 input voltage V IIH Logical 1 input current VDD=VIH=5V A IIL Logical 0 input current No pullup pin A IILP Logical 0 input current Pullup pin, Vin= A CIN Input Capacitance pf 1. All other voltages are relative to Gnd. 2. If VDD will always be below 3.6V (including the effects of ripple, spikes, etc.) then the Bypass pin should be connected to VDD. Pin Descriptions : Internal DSP chip (* : Pull up to VDD via nominal internal 30k resistor) Pin # Name Pin type Description 1 Digout Output Digital serial output for stereo DAC. 2 Int Ext Input* Internal/external program selection. 1:Internal, 0:External. 3 XtalIn Input MHz crystal input. 1 4 XtalOut Output MHz crystal output. 1 5 Prog0/SData Bidirectional* Internal program select 0 / serial interface data line. 6 Prog1/SClk Input* Internal program select 1 / serial interface clock line. 7 Prog2 Input* Internal program select 2. 8 Prog3 Input Internal program select 3. 9 WordClk Output Word clock output. 10 BitClk Output Bit clock output. 11 SysClk Output System clock output. 12 Reset Input Active low reset. 13 Gnd Ground Ground connection 14 Bypass Bidirectional Connect 0.1 F bypass capacitor, Gnd for internal regulator. 15 VDD Power VDD power pin. Connect 0.1 F capacitor to Gnd. 16 DigIn Input Digital serial input from stereo ADC. 1. Intenal 18pF capacitor to ground. Internal 120k resistor between Xtal pads. 2. If VDD will always be below 3.6V (including the effects of ripple, spikes, etc.) then the Bypass pin should be connected to VDD. 18
7 (BTSE-16G SERIES) Proposed Panel design for Sound effector Program List Name Description 0110 Hall 1 Bright hall reverb for drum, guitar, and vocals Hall 2 Warm hall for acoustic guitars, pianos and vocals Room 1 Hardwood studio for acoustic instruments Room 2 Ambience for acoustic mixers and synth sounds Room 3 Warm room for guitars and rhythm Plate 1 Classic plate reverb for lead vocals and drums Plate 2 Sizzling bright plate reverb for vocals and guitars Plate 3 Short vintage plate reverb for snares and guitars Chorus Stereo chorus for guitars and pianos Flanger Stereo flanger for jet wash effects Delay 1 125ms snapback delay for vocals and guitars Delay 2 190ms delay for percussive arpeggios Chorus/Room 1 Chorus with reverb for guitars, synths, and pianos Chorus/Room 2 Auto wah guitar effect with reverb for lead instruments Vocal Cancel Removes lead vocals from many stereo recordings Rotary Speaker Rotary speaker emulation for organs and guitars. & SHIELD The unusual ordering of the programs allow a 16-position rotary switch s CTS code output to be connected to the program pins. Program Mode Change for Panel 19
NemFX. Nemesis Technology, Inc. Digital Multi-Effects Module
NemFX Digital Multi-Effects Module Features Low cost and high performance Digital Multi- Effects Module Superior sound quality 32 or 16 built-in Reverb, Delay, Chorus, Flanger and Multi-Effects programs
TPS 16P / 16A.UB / 16AM.UB
TPS 16P / 16A.UB / 16AM.UB 2 13 Notas Introduction Features Control Element Installation Description Connection Diagram Frequency Response Diagram Block Diagram Presets List Wire Connections Technical
NemFX M-Type Version. Nemesis Technology, Inc.
NemFX M-Type Version Digital Multi-Effects Module Features Low cost and high performance Digital Multi-Effects Module Superior sound quality 16 built-in Reverb, Chorus, Flanger, Delay and Multi-Effects
Spin Semiconductor FV-1 Reverb IC PN: SPN1001. Delay Memory DSP CORE. ROM and Program Control PLL. XTAL Drvr XTAL. Spin.
Featuring Virtual Analog Technology PN: SPN1001 FEATURES Integrated stereo ADC and DAC 8 internal demonstration programs + 8 external programs Easy customization with external EEPROM 3 potentiometer inputs
CARDINAL COMPONENTS. Operating Conditions: Description Min Max Unit
Standard Package Options Series CPP Part Numbering Example: CPP C 1 L Z - A5 B6 - XXXXXX TS CPP C 1 L Z A5 SERIES CPP OUTPUT C = CMOS T = TTL Specifications: PACKAGE STYLE 1 = Full Size 4 = Half Size 5
Frequency Generator and Integrated Buffer for PENTIUM
Integrated Circuit Systems, Inc. ICS9159C-14 Frequency Generator and Integrated Buffer for PENTIUM General Description The ICS9159C-14 generates all clocks required for high speed RISC or CISC microprocessor
Hi-quality with Powerful Parity Multi- effect and signal processor DSP Module
Hi-quality with Powerful Parity Multi- effect and signal processor DSP Module D-Series D202C -a complete and powerful multi-effect DSP Board from Trigaudio, providing various application such as Mixer/DJ
10-pin, 24-Bit, 192 khz Stereo D/A Converter for PCM Audio. Multi-level Sigma-delta DAC. Interpolation. Filter. Multi-level Sigma-delta DAC
10-pin, 24-Bit, 192 khz Stereo D/A Converter for PCM Audio GENERAL DESCRIPTION The is a low cost 10-pin stereo digital to analog converter. The can accept I²S serial audio data format up to 24-bit word
S-8604BWI LINEAR IMAGE SENSOR IC FOR CONTACT IMAGE SENSOR
Rev.1.10 LINEAR IMAGE SENSOR IC FOR CONTACT IMAGE SENSOR The is a linear image sensor suitable for a multichip contact image sensor with resolution of 8 dots per mm. The obtained image signals by light
SG500. Low Jitter Spectrum Clock Generator for PowerPC Designs. Approved Product. FREQUENCY TABLE (MHz) PRODUCT FEATURES CONNECTION DIAGRAM
PRODUCT FEATURES Supports Power PC CPU s. Supports simultaneous PCI and Fast PCI Buses. Uses external buffer to reduce EMI and Jitter PCI synchronous clock. Fast PCI synchronous clock Separated 3.3 volt
Low Power Consumption IPS009BL9_BL9A_BLAA AT Cut 32KHz SPXO
Description IPS009BL9, IPS009BL9A and is the specific SPXO IC for achieving 32KHz output by divide, corresponding to the fundamental crystal from 14MHZ to 27MHz and 33.554MHz corresponding to each IC.
ICS2694. Motherboard Clock Generator. Integrated Circuit Systems, Inc. Description. Features. Applications. Pin Configuration ICS2694
查询 ICS2694 供应商 Integrated Circuit Systems, Inc. 捷多邦, 专业 PCB 打样工厂,24 小时加急出货 ICS2694 Motherboard Clock Generator Description The ICS2694 Motherboard Clock Generator is an integrated circuit using PLL and
Low-Current Consumption, Real-Time Clock IC (General-Purpose IC)
S1T542XXD0A00 Low-Current Consumption, Real-Time Clock IC (General-Purpose IC) Operating power voltage 1.6 to 5.5V (-40 to +85 C) Output control 32.768kHz output function Clock power voltage 1.2 to 5.5V
Description The RA-FX1D offers 8 Mono and 8 Dual Mono selectable delays to cover a range of popular applications.
Digital Multi-Effects Module Features Low cost and high performance Digital Delay Module Superior sound quality 8 Mono and 8 Dual Mono selectable delays 24-bit, 48 khz ADC/DAC Stereo input, stereo output
Preliminary Rev. M Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator
Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator Features Extremely low close-in phase noise, designed for professional Audiophile & Recording application. Typical -100dBc @ 10Hz at
ICS2494 ICS2494A. Dual Video/Memory Clock Generator. Integrated Circuit Systems, Inc. New Features. Features. Applications.
Integrated Circuit Systems, Inc. ICS2494 Dual Video/Memory Clock Generator Features World standard has been reconfigured to allow 8 memory frequencies. Maskprogrammable frequencies Preprogrammed versions
ICS DIMM Buffer. Integrated Circuit Systems, Inc. General Description. Block Diagram. Pin Configuration
Integrated Circuit Systems, Inc. ICS9179-12 3 DIMM Buffer General Description The ICS9179-12 is a buffer intended for reduced pin count 2 - chip Intel BX chipset designs An I 2 C interface is included,
APPLICATIONS GENERAL DESCRIPTION FEATURES PIN CONFIGURATION PIN ASSIGNMENT /INH, Q0 PIN FUNCTION
CMOS Oscillation Frequency : 125MHz (MAX.) 3-State Output Built-in Oscillation Capacitor Built-in Oscillation Feedback Resistor Mini Mold SOT-26 Package APPLICATIONS Crystal Oscillation Modules Computer,
Note that none of the above MAY be a VALID ANSWER.
ECE 270 Learning Outcome 1-1 - Practice Exam / Solution LEARNING OUTCOME #1: an ability to analyze and design CMOS logic gates. Multiple Choice select the single most appropriate response for each question.
SG8F160P. 8-BIT MCU With Embedded Touch Sensor Version 1.1. Sigma reserves the right to change this documentation without prior notice
SPECIFICATION SG8F160P Version 1.1 Sigma reserves the right to change this documentation without prior notice TABLE OF CONTENTS SG8F160P 1. GENERAL DESCRIPTION...3 2. FEATURES...3 3. PIN ASSIGNMENT...5
ICS1561A. Differential Output PLL Clock Generator. Integrated Circuit Systems, Inc. Features. Description. Block Diagram
Integrated Circuit Systems, Inc. ICS1561A Differential Output PLL Clock Generator Description The ICS1561A is a very high performance monolithic PLL frequency synthesizer. Utilizing ICS s advanced CMOS
SM5160CM/DM OVERVIEW PINOUT FEATURES PACKAGE DIMENSIONS SERIES LINEUP. Programable PLL Frequency Synthesizer. (Top View)
NIPPON PRECISION CIRCUITS INC. Programable PLL Frequency Synthesizer OVERVIEW PINOUT (Top View) The SM5160CM/DM is a PLL frequency synthesizer IC with programmable input and reference frequency dividers.
MOSA ELECTRONICS. Features. Description. MS8870 DTMF Receiver
Features Complete DTMF receiver Low power consumption Adjustable guard time Central Office Quality CMOS, Single 5V operation Description O rdering Information : 18 PIN DIP PACKAGE The is a complete DTMF
CMOS MELODY IC. Enables to program up to 16 songs Provided with two built-in independent sound sources A 8-pin package OVERVIEW FEATURES
PF1095-01 SVM7561 SVM7561 Series CMOS MELODY IC Enables to program up to 16 songs Provided with two built-in independent sound sources A 8-pin package OVERVIEW SVM7561Series is the CMOS melody IC that
NT Output LCD Segment/Common Driver NT7703. Features. General Description. Pin Configuration 1 V1.0
160 Output LCD Segment/Common Driver Features (Segment mode)! Shift Clock frequency: 14 MHz (Max.) (VDD = 5V ± 10%) 8 MHz (Max.) (VDD = 2.5V - 4.5V)! Adopts a data bus system! 4-bit / 8-bit parallel input
Low-Jitter I 2 C/SPI Programmable CMOS Oscillator
Datasheet General Description The DSC2110 and series of programmable, highperformance CMOS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating
LINEAR IMAGE SENSOR IC FOR CONTACT IMAGE SENSOR S-8603AWI
rev..0 LINEAR IMAGE SENSOR IC FOR CONTACT IMAGE SENSOR The is a suitable linear image sensor for a multichip-type contact image sensor with a resolution of 8 dots per mm. This IC integrates a 64dots photo-transistor
INL PLOT REFIN DAC AMPLIFIER DAC REGISTER INPUT CONTROL LOGIC, REGISTERS AND LATCHES
ICm ictm IC MICROSYSTEMS FEATURES 12-Bit 1.2v Low Power Single DAC With Serial Interface and Voltage Output DNL PLOT 12-Bit 1.2v Single DAC in 8 Lead TSSOP Package Ultra-Low Power Consumption Guaranteed
FM/AM/SW/LW Multi Band Single Radio Chip C9620
1. Description C9620 is a hand-tune digital display and free debugging single radio chip with FM / AM / SW / LW multi-band. Thanks to its monolithic integrated frequency synthesizers,radio frequency front
BA Features. General Description. Applications. Marking Information. 3W Mono Filterless Class D Audio Power Amplifier
3W Mono Filterless Class D Audio Power Amplifier General Description The BA16853 is a cost-effective mono Class D audio power amplifier that assembles in Dual Flat No-Lead Plastic Package (DFN-8). Only
Digital Signal Detector Interface IC PS202
General Description The detector Integrated circuit is designed for interfacing Passive sensors with microcontrollers or processors. A single wire Data Out, Clock In (DOCI) interface is provided for interfacing
AFX USER GUIDE ACOUSTIC REVERB PEDAL
AFX USER GUIDE ACOUSTIC REVERB PEDAL clip batt off max warm bright short long decay time level tone studio room canyon cathedral plate concert chamber stage REVERB ACOUSTIC EFFECTS 2 Quick start Power
DATASHEET CD4069UBMS. Features. Pinout. Applications. Functional Diagram. Description. Schematic Diagram. CMOS Hex Inverter
DATASHEET CD9UBMS CMOS Hex Inverter FN331 Rev. December 199 Features Pinout High Voltage Types (V Rating) Standardized Symmetrical Output Characteristics CD9UBMS TOP VIEW Medium Speed Operation: tphl,
DATASHEET CD4013BMS. Pinout. Features. Functional Diagram. Applications. Description. CMOS Dual D -Type Flip-Flop. FN3080 Rev 0.
DATASHEET CD013BMS CMOS Dual D -Type Flip-Flop FN300 Rev 0.00 Features High-Voltage Type (0V Rating) Set-Reset Capability Static Flip-Flop Operation - Retains State Indefinitely With Clock Level Either
LINEAR IMAGE SENSOR IC FOR CIS
rev..00 LINEAR IMAGE SENSOR IC FOR CIS The is a suitable linear image sensor IC for a multichip-type contact image sensor with a resolution of 00 dots per inch. This IC integrates a 96dots photo-diode
Embedded Systems. Oscillator and I/O Hardware. Eng. Anis Nazer First Semester
Embedded Systems Oscillator and I/O Hardware Eng. Anis Nazer First Semester 2016-2017 Oscillator configurations Three possible configurations for Oscillator (a) using a crystal oscillator (b) using an
XC2163 Series GENERAL DESCRIPTION APPLICATIONS FEATURES PIN ASSIGNMENT PIN CONFIGURATION /INH, Q0 PIN FUNCTION
ETR1403_001a ICs for use with 3rd Overtone Crystal Oscillators GENERAL DESCRIPTION The XC2163 series are high frequency, low current consumption CMOS ICs with built-in crystal oscillator and divider circuits.
3.3V ZERO DELAY CLOCK MULTIPLIER
3.3V ZERO DELAY CLOCK MULTIPLIER FEATURES: Phase-Lock Loop Clock Distribution for Applications ranging from 10MHz to 1 operating frequency Distributes one clock input to two banks of four outputs Separate
12-pin, 24-Bit Stereo D/A Converter for PCM Audio. Multi-level Sigma-delta DAC. Interpolation. Filter. Multi-level Sigma-delta DAC.
12-pin, 24-Bit Stereo D/A Converter for PCM Audio GENERAL DESCRIPTION The is a low cost 12-pin stereo digital to analog converter. The can accept I²S serial audio data format up to 24-bit word length.
SINGLE-ENDED ANALOG-INPUT 24-BIT, 96-kHz STEREO A/D CONVERTER
SINGLE-ENDED ANALOG-INPUT 24-BIT, 96-kHz STEREO A/D CONVERTER FEATURES 24-Bit Delta-Sigma Stereo A/D Converter Single-Ended Voltage Input: 3 V p-p Antialiasing Filter Included Oversampling Decimation Filter
Description. Benefits CONTROL LOGIC. Rev 1.2, December 21, 2010 Page 1 of 12
3-Channel Clock Distribution Buffer Key Features Low current consumption: - 2.7mA-typ (VDD=1.8V, CL=0) 1.70V to 3.65V power supply operation MHz to 52MHz CLKIN range Supports LVCMOS or Sine Inputs Supports
DATASHEET CD4060BMS. Pinout. Features. Functional Diagram. Oscillator Features. Applications. Description
DATASHEET CDBMS CMOS 1 Stage Ripple-Carry Binary Counter/Divider and Oscillator FN3317 Rev. Features Pinout High Voltage Type (V Rating) Common Reset 1MHz Clock Rate at 15V Fully Static Operation Q1 Q13
DATASHEET CD4027BMS. Features. Pinout. Functional Diagram. Applications. Description. CMOS Dual J-KMaster-Slave Flip-Flop. FN3302 Rev 0.
DATASHEET CD7BMS CMOS Dual J-KMaster-Slave Flip-Flop FN33 Rev. Features Pinout High Voltage Type (V Rating) Set - Reset Capability CD7BMS TOP VIEW Static Flip-Flop Operation - Retains State Indefinitely
3.3V ZERO DELAY CLOCK BUFFER
3.3V ZERO DELAY CLOCK BUFFER IDT2309 FEATURES: Phase-Lock Loop Clock Distribution 10MHz to 1 operating frequency Distributes one clock input to one bank of five and one bankd of four outputs Separate output
3.3V ZERO DELAY CLOCK MULTIPLIER
3.3V ZERO DELAY CLOCK MULTIPLIER IDT2308 FEATURES: Phase-Lock Loop Clock Distribution for Applications ranging from 10MHz to 1 operating frequency Distributes one clock input to two banks of four outputs
MOS (PTY) LTD. E Single Channel PIR Signal Processor. Applications. General Description. Features. Digital Sensor Assembly with E931.
General Description The integrated circuit is designed for interfacing Passive Infra Red (PIR) sensors with micro-controllers or processors. A single wire Data Out, Clock In (DOCI) interface is provided
78A207 MFR1 Receiver DATA SHEET DESCRIPTION FEATURES OCTOBER 2005
DESCRIPTION The 78A207 is a single-chip, Multi-Frequency (MF) receiver that can detect all 15 tone-pairs, including ST and KP framing tones. This receiver is intended for use in equal access applications
SD8000S. 20 bits ADC SOC with RTC. SD8000S Bare Die. Features. Applications. Description. Ordering Information. Pin Diagram and Descriptions
20 bits ADC SOC with RTC Features High precision ADC, 20 bits effective resolution Low noise, high input impedance preamplifier with selectable gain: 1, 12.5, 50, 100, or 200 8 bits RISC ultra low power
LOW POWER TCXO & VCTCXO OSCILLATOR
PETERMANN-TECHNIK GmbH LOW POWER TCXO & VCTCXO OSCILLATOR SERIES TCVCTO-2 10.0 40.0 MHz FEATURES + 100% pin-to-pin drop-in replacement to quartz and MEMS based VCTCXO + Ultra Performance Oscillator for
IPS009 series IC CMOS SPXO
IPS009 series IC Description IPS009 is the IC for SPXO corresponding to the fundamental crystal from 14MHZ to 100MHz, and operation voltage is 1.2V minimum, so it is the best for the application to the
RoHS EV32C3 A 3 A M
RoH Pb EV32C3 A 3 A 1-27.000M eries RoH Compliant (Pb-free) 3.3V 6 Pad 5mm x 7mm Ceramic MD LVCMO/TTL VCXO (Tri-tate Pad 5) Operating Temperature Range 0 C to +70 C Absolute Pull Range ±50ppm Minimum Nominal
VOICE ROM GENERAL DESCRIPTION FEATURES. Group of sections
VESATILE 20 SEC INSTANT VOICE OM FEATUES M inimum 20 second voice length at 6 KHz Versatile features for playback C ombination of voice building blocks extends the duration of playback V oice data re-use
Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range. Frequency Stability and Aging ppm ppm ppm ppm
Features Frequencies between 115.194001 MHz to 137 MHz accurate to 6 decimal places Operating temperature from -40 C to +125 C. For -55 C option, refer to MO8920 and MO8921 Supply voltage of +1.8V or +2.5V
Princeton Technology Corp.
DESCRIPTION is an electronic volume controller IC utilizing CMOS Technology specially designed for use on audio equipments. It has two () built-in channels making it ideally suitable for mono and stereo
XR FSK Modem Filter FUNCTIONAL BLOCK DIAGRAM GENERAL DESCRIPTION FEATURES ORDERING INFORMATION APPLICATIONS SYSTEM DESCRIPTION
FSK Modem Filter GENERAL DESCRIPTION FUNCTIONAL BLOCK DIAGRAM The XR-2103 is a Monolithic Switched-Capacitor Filter designed to perform the complete filtering function necessary for a Bell 103 Compatible
NOTE: The Flatpak version has the same pinouts (Connection Diagram) as the Dual In-Line Package.
DECADE COUNTER; 4-BIT BINARY COUNTER The SN54/ and SN54/ are high-speed 4-bit ripple type counters partitioned into two sectio. Each counter has a divide-by-two section and either a divide-by-five () or
Output freq. (Fo) Output Load
Description The QT1123 Real-Time Clock provides a time/calendar function, a 32 byte static RAM, and a 3 wire Serial Peripheral Interface (SPI Bus). The part is designed for high temperature applications
9.5 Ω RON, ±15 V/+12 V/±5 V icmos, Serially-Controlled Octal SPST Switches ADG1414
9.5 Ω RON, ±5 V/+2 V/±5 V icmos, Serially-Controlled Octal SPST Switches FEATURES SPI interface Supports daisy-chain mode 9.5 Ω on resistance at 25 C and ±5 V dual supply.6 Ω on-resistance flatness at
5-BIT REGISTERED TRANSCEIVER
5-BIT REGISTERED TRANSCEIVER FEATURES DESCRIPTION 25Ω cut-off bus outputs receiver outputs Transmit and receive registers with separate clocks 1500ps max. delay from CLK1 to Bus Outputs (BUS) 1500ps max.
KA909A KA909A-Rev 2.0
ANALOG SIGNAL CONDITIONING IC FOR CCTV CAMERA SYSTEMS Features Iris control circuitry with Rail-to-Rail operation Continuous Iris Amp Output Current of 80 ma Coaxitron (UTC) receiver with DC Restoration
LOW POWER SPREAD SPECTRUM OSCILLATOR
LOW POWER SPREAD SPECTRUM OSCILLATOR SERIES LPSSO WITH SPREAD-OFF FUNCTION 1.0 110.0 MHz FEATURES + 100% pin-to-pin drop-in replacement to quartz and MEMS based XO + Low Power Spread Spectrum Oscillator
Single Output Clock Generator
Single Output Clock Generator IDT5V926A DATA SHEET FEATURES: 3V to 3.6V operating voltage 48MHz to 160MHz output frequency range Input from fundamental crystal oscillator or external source Internal PLL
TLV BIT ANALOG-TO-DIGITAL CONVERTER FOR FLEX PAGER CHIPSET SLAS134B NOVEMBER 1995 REVISED NOVEMBER 1996
Supports FLEX Protocol Pagers With The TLV5591 FLEX Decoder 3-Pole Butterworth Low-Pass Selectable Dual-Bandwidth Audio Filter BW 1 = 1 khz ±5% ( 3 db) BW 2 = 2 khz ±5% ( 3 db) Both Peak and Valley Detectors
CD40174BMS. CMOS Hex D -Type Flip-Flop. Features. Pinout. Applications. Functional Diagram. Description. December 1992
SEMICONDUCTOR CD17BMS December 199 CMOS Hex D -Type Flip-Flop Features Pinout High Voltage Type (V Rating) 5V, and 15V Parametric Ratings CD17BMS TOP VIEW Standardized, Symmetrical Output Characteristics
FM/AM/SW/LW Multi Band Single Radio Chip C9631
1. Description C9631 is PLL free debugging single radio chip with FM / AM / SW / LW multi-band. Thanks to its monolithic integrated frequency synthesizers,radio frequency front end and MPX decoder,this
HART Modem DS8500. Features
Rev 1; 2/09 EVALUATION KIT AVAILABLE General Description The is a single-chip modem with Highway Addressable Remote Transducer (HART) capabilities and satisfies the HART physical layer requirements. The
DS1803 Addressable Dual Digital Potentiometer
www.dalsemi.com FEATURES 3V or 5V Power Supplies Ultra-low power consumption Two digitally controlled, 256-position potentiometers 14-Pin TSSOP (173 mil) and 16-Pin SOIC (150 mil) packaging available for
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu. CD49BMS December 199 Features High-Voltage Type (V Rating) Medium Speed
MEMS Ultra-Low Power Oscillator, khz Quartz XTAL Replacement
33Features: MEMS Technology Small SMD package: 2.0 x 1.2 mm (2012) Fixed 32.768 khz output frequency NanoDrve TM programmable output swing for lowest power Pb-free, RoHS and REACH compliant Typical Applications:
3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM COMPATIBLE
3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM COMPATIBLE IDT23S05 FEATURES: Phase-Lock Loop Clock Distribution 10MHz to 133MHz operating frequency Distributes one clock input to one bank of five outputs
IPS009 series IC CMOS SPXO
IPS009 series IC CMOS SPXO Description IPS009 is the IC for SPXO corresponding to the fundamental crystal from 14MHZ to 100MHz, and operation voltage is 1.2V minimum, so it is the best for the application
Single-Channel, 5th Order, Standard Definition Video Filter Driver BL1511B
Single-Channel, 5th Order, Standard Definition Video Filter Driver Description The is a low-voltage, single-channel video amplifier with integrated reconstruction filter and input clamps. Specially suited
PI6LC48P0201A 2-Output LVPECL Networking Clock Generator
Features ÎÎTwo differential LVPECL output pairs ÎÎSelectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input ÎÎSupports the following output frequencies: 62.5MHz, 125MHz, 156.25MHz
HART Modem HT2015 DataSheet
SmarResearch TechnologySource HART Fieldbus Profibus Intrinsic Safety Configuration Tools Semiconductors Training Custom Design HART Modem HT2015 DataSheet Features Can be used in designs presently using
DATA SHEET. VLN5P Series (OTP) Single-Chip 4-bit MCU with 15~24 I/O, 1-Ch Speech + Dual-Tone or 4-Ch Speech/Midi. Version 1.5 Jul.
DATA SHEET (OTP) Single-Chip 4-bit MCU with 15~24 I/O, 1-Ch Speech + Dual-Tone or 4-Ch Speech/Midi Version 15 Jul 4, 2013 VOICELAND reserves the right to change this document without prior notice Information
EM78P159N Errata document Specification Revision History
8- Microprocessor with OTP ROM EM78P159N Errata document Specification Revision History Doc. Version Revision Description Date 1.0 Initial Release Version 2006/05/16 1.1 Modified the Reliability Test and
Test Specification City of Glasgow College HND Electronics Graded Unit Project SARRRO Gavin Hannah N /13
Test Specification City of Glasgow College HND Electronics Graded Unit Project SARRRO Gavin Hannah N10161454 2012/13 This document provides details on test procedures for SARRRO. It should provide a reference
EUA W/CH Stereo Filter-less Class-D Audio Power Amplifier with Auto-Recovery
3-W/CH Stereo Filter-less Class-D Audio Power Amplifier with Auto-Recovery DESCRIPTION The is a high efficiency, 3W/channel stereo class-d audio power amplifier. A low noise, filterless PWM architecture
Techcode TD8215. Step-up DC/DC Controller. General Description. Features. Applications. Pin Configurations DATASHEET TD8215 INV SCP VDD CTL
General Description Features The is a single PWM, step up DC DC controller with low operating voltage application integrating softstart and short circuit detection function. The oscillator switching frequency
24-bit Step Size, Resolution 3 Hz typ Exact Frequency Mode Built-in Digital Self Test 40 Lead 6x6mm SMT Package: 36mm 2. Phased Array Applications
FRACTIONAL-N PLL WITH INTEGRATED VCO, 80-80 MHz Features RF Bandwidth: 80 to 80 MHz Ultra Low Phase Noise -110 dbc/hz in Band Typ. Figure of Merit (FOM) -22 dbc < 180 fs RMS Jitter 24-bit Step Size, Resolution
HMC677G32 INTERFACE - SMT. 6-Bit SERIAL/PARALLEL SWITCH DRIVER/CONTROLLER. Typical Applications. Features. Functional Diagram. General Description
Typical Applications The is ideal for: Microwave and Millimeterwave Control Circuits Test and Measurement Equipment Complex Multi-Function Assemblies Military and Space Subsystems Transmit/Receive Module
NJU6434C 1/4 DUTY LCD DRIVER PRELIMINARY ! GENERAL DESCRIPTION ! PACKAGE OUTLINE ! FEATURES ! BLOCK DIAGRAM
PRELIMINARY 1/4 DUTY LCD DRIVER! GENERAL DESCRIPTION The NJU6434 is a 1/4 duty LCD driver for segment type LCD panel. The LCD driver consists of 4-common and 50-segment drives up to 200 segments. The NJU6434
LOW POWER PROGRAMMABLE OSCILLATOR
LOW POWER PROGRAMMABLE OSCILLATOR SERIES LPOP 115.0 137.0 MHz FEATURES + High Frequency Programmable Low Power Oscillator for Low Cost + Excellent long time reliability + Excellent total frequency stability
4 x 10 bit Free Run A/D 4 x Hi Comparator 4 x Low Comparator IRQ on Compare MX839. C-BUS Interface & Control Logic
DATA BULLETIN MX839 Digitally Controlled Analog I/O Processor PRELIMINARY INFORMATION Features x 4 input intelligent 10 bit A/D monitoring subsystem 4 High and 4 Low Comparators External IRQ Generator
500MHz TTL/CMOS Potato Chip
FEATURES:. Patent pending technology. Max input frequency > 1GHz. Operating frequency up to 500MHz with 2pf load. Operating frequency up to 450MHz with 5pf load. Operating frequency up to 300MHz with 15pf
Princeton Technology Corp. DESCRIPTION FEATURES APPLICATIONS. Echo Processor IC
DESCRIPTION is an echo audio processor IC utilizing CMOS Technology which is equipped with ADC and DAC, high sampling frequency and an internal memory of 44K Digital processing is used to generate the
DS1075. EconOscillator/Divider PRELIMINARY FEATURES PIN ASSIGNMENT FREQUENCY OPTIONS
PRELIMINARY EconOscillator/Divider FEATURES Dual Fixed frequency outputs (200 KHz 100 MHz) User programmable on chip dividers (from 1 513) User programmable on chip prescaler (1, 2, 4) No external components
SN54LS373, SN54LS374, SN54S373, SN54S374, SN74LS373, SN74LS374, SN74S373, SN74S374 OCTAL D-TYPE TRANSPARENT LATCHES AND EDGE-TRIGGERED FLIP-FLOPS
SN54LS373, SN54LS374, SN54S373, SN54S374, Choice of Eight Latches or Eight D-Type Flip-Flops in a Single Package 3-State Bus-Driving s Full Parallel Access for Loading Buffered Control s Clock-Enable Has
Freescale Semiconductor, I
nc. SEMICONDUCTOR TECHNICAL DATA Order this document by MC14LC5480/D Advance Information The MC14LC5480 is a general purpose per channel PCM Codec Filter with pin selectable Mu Law or A Law companding,
LOW POWER PROGRAMMABLE OSCILLATOR
LOW POWER PROGRAMMABLE OSCILLATOR SERIES LPOP 1.0 110.0 MHZ FEATURES + Low Power Programmable Oscillator for Low Cost + Excellent long time reliability + Frequency range of 1 MHz and 110 MHz accurate to
FX-700 Low Jitter Frequency Translator
Product Data Sheet FX-700 Low Jitter Frequency Translator Description The FX-700 is a crystal-based frequency translator used in communications applications where low jitter is paramount. Performance advantages
SPG Monolithic Event Detector Interface SP42400P
SPG Monolithic Event Detector Interface SP42400P General description: The SP42400P is a monolithic device fabricated in CMOS technology. Its generic function is to detect low to medium frequency, low voltage
MT70014 TWO CHANNEL ARINC TRANSMITTER. Full MIL operating range Automatic parity generation HIGH/LOW speed programmable independently in each channel
TWO CHANNEL ARINC TRANSMITTER 8 bit parallel interface TTL/CMOS compatible I/P Single 5V supply with low power consumption < 50mW Full MIL operating range Automatic parity generation HIGH/LOW speed programmable
SD2085 Low Power HART TM Modem
Low Power HART TM Modem Feature Single chip, half duplex 1200 bps FSK modem Meets HART physical layer requirements Bell 202 shift frequencies of 1200Hz and 2200Hz Buffered HART output for drive capability
S-8604BWI LINEAR IMAGE SENSOR IC FOR CONTACT IMAGE SENSOR. Rev.1.1_10
Rev.1.1_10 LINEAR IMAGE SENSOR IC FOR CONTACT IMAGE SENSOR The is a linear image sensor suitable for a multichip contact image sensor with resolution of 8 dots per mm. The obtained image signals by light
PI6LC48P Output LVPECL Networking Clock Generator
Features ÎÎFour differential LVPECL output pairs ÎÎSelectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input ÎÎSupports the following output frequencies: 156.25MHz, 125MHz, 62.5MHz
Pin Assignment SEG28 SEG29 SEG30 SEG31 SEG32 SEG33 SEG34 SEG35 SEG36 SEG37 SEG38 VDD SDA SCL COM0 COM1 COM2 COM3 COM4 COM5 COM6 COM
General Description Features VK2C23 56 4 / 52 8 LCD Driver Controller The VK2C23 device is a memory mapping and multi-function LCD controller driver. The Display segments of the device are 224 patterns
ADS9850 Signal Generator Module
1. Introduction ADS9850 Signal Generator Module This module described here is based on ADS9850, a CMOS, 125MHz, and Complete DDS Synthesizer. The AD9850 is a highly integrated device that uses advanced
Three-Channel, 5th Order, Standard Definition Video Filter Driver BL1513
Three-Channel, 5th Order, Standard Definition Video Filter Driver Description The is a low-voltage, three-channel video amplifier with integrated reconstruction and s. Specially suited for standard definition
HI-1587 MIL-STD-1553 / V Dual Transceiver with Integrated IP Security Module
July 2018 DESCRIPTION HI-1587 MIL-STD-1553 / 1760 3.3V Dual Transceiver with Integrated IP Security Module PIN CONFIGURATION The HI-1587 is an ultra-low power MIL-STD-1553 dual transceiver designed to