STORE NUM.: 284 CROSS STREETS: San Pablo Ave & Monroe St. ADDRESS: 1075 Monroe St. Albany, CA
|
|
|
- Victoria Charles
- 5 years ago
- Views:
Transcription
1 STORE NUM.: 8 CROSS STREETS: San Pablo Ave & Monroe St. ADDRESS: 0 Monroe St. Albany, CA WALL SIGNS: Building Elevation NOTES: North South East West Area Allowed per Elevation Signs Allowed per Elevation PROPOSED LTR Height Allowed Sq. Footage Sign Type sf 8.9 sf Total 00 sf.9 sf Channel Letters Channel Letters Channel Letters FREESTANDING SIGNS: Freestanding Signs: Panel Size - Area or Dimensions Panel Location: street: street: NOTES: VARIANCE x sf x sf WINDOW SIGNS: Building Elevation Area Allowed per Code or LL PROPOSED Sq. Footage South None by City Code N/A SFM-8 AlbanyCA-R0-00
2 Storefront Building Elevation - South "" "" 0" White LED Illum'. Channel Letters SF Side Building Elevation - East "" "" " Green LED Illum'. Channel Letters 8.9 SF SITE PLAN SFM-8 AlbanyCA-R0-00
3 '- /" 0'-0" WHITE LETTERS DURING THE DAY/GLOW GREEN AT NIGHT '-0" '-0" 8'-9" Nighttime Simulation Scale: Not to Scale " 0" /" " '-9 /" '-" Storefront Building Elevation - South scale: /"='-0" "" 0" STD LED Channel Letters scale: /8"='-0" SFM-8 AlbanyCA-R0-00
4 0" '- /" '- /" 0'-0" 0'-0" Side Building Elevation - East scale: /"='-0" '- /" '- /" - LTRS '- /" - LTRS '-8 /" " SFMLMSP " SFMLMFM "" " STD LED Channel Letters scale: /8"='-0" 8.9 SFM-8 AlbanyCA-R0-00
5 '-0" B " '-0" 8'-9" " C 0" /" " E D TYPICAL SECTION DETAIL NOT TO SCALE I N S T A L L A. /" Rivet Nut Inserts in Back of Letter for Non-Corrosive Securement Using Appropriate Mounting Hardware B. Blocking as Required per Location C. Disconnect Switch at Transformer Can D. /" Drain Holes as Required E. 0 amp 0 V. Circuits Required (Supplied by Others Than Image National) F. Mfg. Plastic Pass-Thru F A FACE: TRIM CAP: "" MATERIAL: /" ACRYLIC VINYL: nd Surf. M 0- VIVID GREEN MATERIAL: " JEWELITE TRIM CAP COLOR: BLACK DROP SHADE: MATERIAL: PRE-PAINTED.00 ALUM. COLOR: PAINTED SATIN BLACK ATTACHED TO BACK of LETTER 0" STD LED Channel Letters scale: /8"='-0" RETURNS: MATERIAL: "" PRE-PAINTED.00 ALUM. "FARMERS MARKET" PRE-PAINTED.00 ALUM. SIZE: " COLOR: SATIN BLACK (WHITE INSIDE) BACKS: MATERIAL: PRE-PAINTED.0 ALUM. COLOR: PRE-PAINTED WHITE (WHITE INSIDE) MATERIAL: /" ACRYLIC SIZE: " x " COLOR: ST SURFACE BLACK OPAQUE W/WHITE OPAQUE VINYL SFMLM0SP ILLUMINATION: MATERIAL: GE LED SIZE: GEMX-W 0 ELECTRICAL: POWER SUPPLY: GE TOTAL 0 volts WHITE LETTERS DURING THE DAY /GLOW GREEN AT NIGHT SFM-8 AlbanyCA-R0-00
6 '- /" B " '- /" - LTRS '- /" - LTRS C '-8 /" " SFMLMSP SFMLMFM F A " "" " STD LED Channel Letters scale: /8"='-0" 8.9 E D TYPICAL SECTION DETAIL NOT TO SCALE I N S T A L L FACE: MATERIAL: /" ACRYLIC VINYL: M 0- VIVID GREEN TRIM CAP: RETURNS: MATERIAL: "" PRE-PAINTED.00 ALUM. "FARMERS MARKET" PRE-PAINTED.00 ALUM. SIZE: " COLOR: SATIN BLACK (WHITE INSIDE) BACKS: ILLUMINATION: MATERIAL: GE LED SIZE: GEMX-W 0 ELECTRICAL: A. /" Rivet Nut Inserts in Back of Letter for Non-Corrosive Securement Using Appropriate Mounting Hardware B. Blocking as Required per Location C. Disconnect Switch at Transformer Can D. /" Drain Holes as Required E. 0 amp 0 V. Circuits Required (Supplied by Others Than Image National) F. Mfg. Plastic Pass-Thru MATERIAL: " JEWELITE TRIM CAP COLOR: BLACK DROP SHADE: MATERIAL: PRE-PAINTED.00 ALUM. COLOR: PAINTED SATIN BLACK ATTACHED TO BACK of LETTER MATERIAL: PRE-PAINTED.0 ALUM. COLOR: PRE-PAINTED WHITE (WHITE INSIDE) MATERIAL: /" ACRYLIC SIZE: /" w/ 0- VIVID GREEN VINYL POWER SUPPLY: GE TOTAL 0 volts SFM-8 AlbanyCA-R0-00
5601 BRODIE LANE #1325 SUNSET VALLEY, TEXAS
, Suite 00, Texas 0 FAX: --0 0 San Jacinto Boulevard THIS DESIGN AND ENGINEERING IS SUBMITTED AS OUR PROPOSAL, AND THE RIGHT TO USE OR IN ANY FORM, IS NOT AUTHORIZED WITHOUT WRITTEN PERMISSION BY US SIGNS.
ARB MEETING DATE: APRIL 17, 2017 BUSINESS NAME: 1 WALL MOUNTED SIGN 4 WALL MOUNTED, 1 FREESTANDING SQUARE FEET
ARCHITECTURAL REVIEW BOARD SIGN FORM BUSINESS NAME: WORLD FINANCE AND LOANS LOCATION: 205 N. GOOSE CREEK BLVD./STE. 104 NUMBER & TYPE OF SIGNS APPLYING FOR: NUMBER OF ALLOWABLE SIGNS: MAXIMUM ALLOWABLE
Exterior Signage. Design Development 75% 30 November, In collaboration with:
Exterior Signage Design Development 75% 30 November, 2016 In collaboration with: Identity ABCDEFGHIJKLMNOPQRSTUVWXYZ 1234567890 abcdefghijklmnopqrstuvwxyz Antenna Regular ABCDEFGHIJKLMNOPQRSTUVWXYZ 1234567890
TBD GLASS/ GRAPHIC GLASS V.O. 7 1/4 TBD VINYL 3-2 ROM GRADE
ON OFF 7.22 22-2 15/16 (OAL) 6.3 50.8661 CABINET 50.8661 CABINET 50.8661 CABINET 50.8661 CABINET 50.8661 CABINET 6.3 29 3/4 OAH W/ RAIN CAP 24 CABINET (OAH) MANUFACTURE & SHIP ONE (1) SET OF 24 S/F INTERNALLY
FOOD PHARMACY DRIVE THRU
Tenant Kroger MONUMENT SIGN Qty 1 QID 14-25119 15-0 11-0 3 (15.09 sq. ft.) Savannah GA 2-5 1/2 0-9 1-6 3-1 3/4 1-6 Kroger 6-6 FOOD PHARMACY DRIVE THRU MAIN ID CABINET: ALUMINUM CONSTRUCTION TENANT PANELS:
SITE PLAN DEV-EMST R3 F E SIGNAGE SPECIFICATIONS AREA MAP DESIGN DRAWING See Pathfinder for more details. OGLETHORPE AVE PAPY STREET
SITE PLAN SIGNAGE SPECIFICATIONS A PRINCIPAL USE SIGN: CUSTOM CHANNEL LETTERS Manufacture and Install () set Channel Letters OGLETHORPE AVE A PRINCIPAL USE SIGN: CUSTOM CHANNEL LETTERS Manufacture and
AJG 8-1/2" 13'-6" 2'-1 1/4" 3'-6" NIGHT VIEW N.T.S. ANIMART MADISON, WI MICHAEL OLKWITZ P-A. side view TURQUOISE AKZO NOBEL 331-A3
8-1/ 13'-" 3'-" building fascia 1" 2'-1 1/4" side view Exhibit D previously approved by the U.D.C. S/F ILLUMINATED EXTERIOR CABINET MOUNTED TO BUILDING FASCIA 12-11-0 FABRICATE CABINET FROM ABC SMALL A..125
MINNETONKA PLANNING COMMISSION June 11, Recommendation Adopt the resolution repealing and replacing the existing sign plan
MINNETONKA PLANNING COMMISSION June 11, 2015 Brief Description Seven Hi sign plan amendment Recommendation Adopt the resolution repealing and replacing the existing sign plan Project No. 15017.15a Property
Note: This assembly instruction will cover all configurations of Alloy adjustable height single bases.
Note: This assembly instruction will cover all configurations of adjustable height single bases. 1 With the leg upside down. Attach the freestanding foot to the bottom of the adjustable height leg using
SF A PLAN VIEW MC DONALD'S S/S KANATA NORTH 866 MARCH ROAD, KANATA, ON LOGO SIGN SEE DRAWING #RND1L7D " ILLUMINATED S/F PEDESTRIAN ARCH
6 4 2 3 Date: / / Customer Approval: 6 5 1 6 4 1 1 5 2 3 SF-020438A PLAN VIEW Installation: Interior: # Descriptions: Exterior: 1 24" ILLUMINATED MCDO CHANNEL LETTERS ON RACEWAY SEE MCD1C4D7119 SQUARE
AIRPORT MARINA SHOPPING CENTER
AIRPORT MARINA SHOPPING CENTER SIGN PROGRAM 5TH STREET @ VICTORIA AVENUE OXNARD, 93030 ~ BY: ~)PRO~?--~ij DATE: CITY OF OXNARD PLANNING \3- \C{u-- L{( SUVe( ljes /tl( ctl'-t-( S':;/' (ftd J (t1 LM 5- Sign
ARB COMPREHENSIVE SIGN REVIEW APPROVED CONDITIONS SEMINOLE NORTH ARB AND : Seminole North TAX MAP/PARCEL#: 32-5B
ARB COMPREHENSIVE SIGN REVIEW APPROVED CONDITIONS SEMINOLE NORTH ARB-2017-24 AND 2017-29: TAX MAP/PARCEL#: 32-5B SIGN FEATURE APPROVED CONDITION SIGN TYPE Channel Letter Cabinet Signs and Panel Signs Awnings
All Terrain Flares 2014 Chevy Silverado
Page 1/8 Components: 1. Front Flares (2) 2. Rear Flares (2) Tools required: - Utility knife - #2 Phillips driver - Socket wrench - 13 mm Socket - 6 mm Allen Wrench - T-15 Torx bit - Trim Removal Tool -
Agenda Item: Revised Master Sign Plan Windsor Run Retirement Center
Agenda Item: Revised Master Sign Plan Retirement Center DATE: November 1, 2017 FROM: Mary Jo Gollnitz, Planner Background/Issue: EMH&T is requesting a revision to Retirement Center Master Sign Plan approved
ATTACHMENT B1. Typical Facility Signage Standards and Guidelines/Sign Types
7006786 TTCHMENT B1 Typical Facility Signage Standards and Guidelines/Sign Types 3.0 3.0 S - TERMINLS/GTE RES - 3.1 Sign Type Index - 3.2 Sign Types INDEX - TERMINLS/GTE RES This chapter provides specific
Lattice Application Overview Updated
Lattice Application Overview Updated 2017.08.20 Lattice Overview Lattice addresses two needs; brightness and depth. First, what is the working depth? Second, brightness / lm demands? Additional considerations
1.1. Multi-Panel Series
Multi-Panel Series 1.1.100 The Multi-Panel, or MP, concept accommodates independent multiple sign panels for total flexibility, changeability and replacement. Winner of The Certificate of Recognition for
Addendum for 2018-COA-486 and 2018-COA-487 for the LeRoux and Cho 77 Projecting signs
Addendum for 2018-COA-486 and 2018-COA-487 for the LeRoux and Cho 77 Projecting signs Included documents: Principle 7 of the Design Guidelines for Lower Downtown Historic District (June 19, 2007) Sugar
Assembly Instructions
Section A Interna-Rail Components Handrail systems utilizing Interna-Rail in-line fittings provide a sleek architectural finish with anodized fittings and aluminum pipe. Interna- Rail has the clean look
Nassau University Medical Center Campus Site ID Bid Addendum Revised
8 October 2010 Nassau University Medical Center Campus Site ID Bid Addendum Revised SITE REVIEW CL CARMAN AVENUE 7'-6" 19'-0" 3 18'-10" 35 Bus Stop 8'-6" HEMPSTEAD TURNPIKE HEMPSTEAD TURNPIKE 1ID 1 Primary
expanded product line Transilluminated Knobs
ISO 9001:2008 certified expanded product line Transilluminated Knobs Transilluminated Knobs index General Information PAGES 2T through 4T TL Series Knobs PAGE 5T TS Series Knobs PAGE 6T DBP Series Knobs
TH Place, Maspeth, NY Instruction Manual for UNO Exit Signs
57-10 49 TH Place, Maspeth, NY 11378 Instruction Manual for UNO Exit Signs 1. What is included in this box? Back box with electronics, battery (where applicable), & mounting hardware. Inner trim, LED illuminator
John Deere 9570STS, 9650STS, 9660STS, and 9750STS Grain Tank Cross Auger Trough Liner EXOPLATE INSTRUCTION MANUAL
PLEASE READ THE ENTIRE INSTRUCTION SHEET BEFORE STARTING INSTALLATION. PLEASE REFER TO THE OPERATORS MANUAL FOR YOUR SPECIFIC COMBINE FOR PERTINENT SAFETY PRECAUTIONS THE TERMS. LEFT, RIGHT, FRONT, & REAR
RS-AC-F2 Stainless Steel Returns Protruded Acrylic Face - Resno Protruded Acrylic Face - Face is customizeable (Thickness, Color, etc.) - Stainless St
RS-AC-F1 - Resno Flush Acrylic Face - Stainless Steel returns Acrylic Face Stainless Steel Returns - Serviceable from Back - More for Blocky-type letters - is customizeable RS-AC-F2 Stainless Steel Returns
DEPTH-KIT-785 Seat Depth Extension
Parts Required: 2 x Seat Frame Plugs 1.5 or 3 1 x Elevation Rod 18.5 or 20 2 x Attachment Rods 18.5 or 20 3 x Vinyl Straps color and width specific Tools Used: Sissors 2 x ½ Wrench Soft Tip Hammer or Mallet
INSTALLATION INSTRUCTIONS John Deere 600C Corn Head Auger Trough Liner
www.polyskid.com P.O. Drawer 349, Monticello, GA 31064 Phone: 800.542.7659 Fax: 706.468.2881 e-mail: polytech@polyskid.com INSTALLATION INSTRUCTIONS John Deere 600C Corn Head Auger Trough Liner IT IS VERY
TOOLS REQUIRED Metal Wood Wood and Metal Screws. #16 Drill #12-24 Tap. 1/8 Drill
DEVICES COVERED IN THIS DOCUMENT: 4700S Surface Vertical Rod Device 4700SF Fire Exit Surface Vertical Rod Device TOOLS REQUIRED Metal Wood Wood and Metal Screws Sex Bolts #7 Drill ¼ -20 Tap #16 Drill #12-24
6 Xavier Drive, Yonkers, NY INSERT MALL IMAGE HERE
INSERT MALL IMAGE HERE ADDENDUM LOG June, 2009 Full Update August, 2009 Storefront signage requirement update November, 2011 Updated Letter size requirements (s4) and Blade Sign requirements (s13) February,
SUNSET & FRANCISQUITO SHOPPING CENTER S I G N P R O G R A M
SUNSET & FRANCISQUITO SHOPPING CENTER WEST COVINA, CALIFORNIA S I G N P R O G R A M PROJECT LOCATION: 1200-1314 West Francisquito Ave., West Covina, CA 91790 PREPARED BY: 6399 Wilshire Blvd., Ste. #604
SAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20
SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management
ADJUST-A-VIEW HALF CIRCLE INSTALLATION INSTRUCTIONS
Omega Mfg. Corporation Two Rivers, WI (800) 874-9594 www.adjustaview.com Proudly Serving Customers Since 1976 Page 1 of 7 MATERIAL LIST ADJUST-A-VIEW User Instructions ADJUST-A-VIEW Installation Instructions
ARB ACTION MEMO. Mr. Missel called the meeting to order at 1:01 p.m. and established a quorum.
COUNTY OF ALBEMARLE Department of Community Development 401 McIntire Road, North Wing Charlottesville, Virginia 22902-4596 (434) 296-5823 Fax (434) 972-4012 Date: Time: 1:00 PM Meeting Room: Room #241
APPLICATION FOR AN AMENDMENT TO - THE COMPREHENSIVE STADIUM SIGN PLAN. Prepared by:
APPLICATION FOR AN AMENDMENT TO - THE COMPREHENSIVE STADIUM SIGN PLAN Prepared by: SPORTS AUTHORITY FIELD AT MILE HIGH I November 17, 2011 APPLICATION FOR AN AMENDMENT TO THE COMPREHENSIVE SIGN PLAN 11.17.11
Note: This assembly instruction will cover all configurations of Alloy adjustable height double bases.
Note: This assembly instruction will cover all configurations of adjustable height double bases. 1 Screw in the provided adjustable glides into each leg as shown in Figure A. Two glides per leg. Figure
Conflicts Note: None. TOYOTA Highlander 2016 LED Illumination Package (Interior and Exterior) Part Number: Accessory Code: LL1000
TOYOTA Highlander 2016 LED Illumination Package (Interior and Exterior) Part Number: 00016-00069 Accessory Code: LL1000 Conflicts Note: None Color Applicability/Trim Level Kit Contents Item # Quantity
All Terrain Flares 09+ Ford F150
Page 1/5 Components: 1. Front Flares (2) 2. Front Flare Inner Pieces (2) 3. Rear Flares (2) Tools required: - Utility knife - Electric Drill - 1/4 Drill Bit - #2 Phillips driver - Socket wrench Hardware
MAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases make the traffic signal aesthetically pleasing to the eye. In addition to the standar 4-piece, Pelco also manufactures the bases with an
FLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS
FLOE DOCK FURNITURE ASSEMBLY INSTRUCTIONS KIT P/N 510-00400-02 KIT P/N 510-00405-02 KIT P/N 510-00406-02 KIT P/N 510-00410-02 WARNING IT IS THE INSTALLER S RESPONSIBILITY TO PROPERLY INSTALL this chair
Raymond P. Ocel Jr., Development Program Planner/Acting Zoning Administrator (703)
STAFF REPORT Architectural Review Board December 18, 2017 Title: APPLICATION FOR A WALL SIGN, ARB #17-33. Staff Contact: Raymond P. Ocel Jr., Development Program Planner/Acting Zoning Administrator (703)
Uniform Sign Plan (USP) MacGregor Village 86-USP-003
Uniform Sign Plan (USP) MacGregor Village 86-USP-003 These guidelines are published for informational purposes. They describe the characteristics of signs, not structures on which signs are placed. A sign
4Post Shelving Assembly Instructions
4Post Shelving Assembly Instructions ATTENTION: BEFORE STARTING ASSEMBLY, DETERMINE WHICH STYLE OF SHELVING IS TO BE BUILT AND FIND THE CORRESPONDING SECTION OF THE INSTRUCTIONS. READ ALL INSTRUCTIONS
IMPORTANT! Recommended Tools. 7/16 Deep socket Phillips screwdriver
IMPORTANT! Read all instructions carefully before commencing any work. Always wear proper safety equipment. Some installation steps will require two or more installers. Recommended Tools Ratchet 10-mm
ARCHITECTURAL REVIEW BOARD STAFF REPORT. ARB : Super Test Sunoco Fuel Pump Canopy and Signs
ARCHITECTURAL REVIEW BOARD STAFF REPORT Project #/Name Review Type Parcel Identification Zoned Owner/Applicant Magisterial District Proposal Context Visibility ARB-2012-43: Super Test Sunoco Fuel Pump
Pleated Shades with Continuous Cord Loop Option
Pleated Shades with Continuous Cord Loop Option Installation Instructions Email: customerservice@blindster.com Call us: (888) 256-8672 Mon - Fri 8am - 7pm (CT) Thank you for purchasing a Pleated Shade
Village of Glenview Appearance Commission
Village of Glenview Appearance Commission STAFF REPORT June 13, 2018 TO: Chairman and Appearance Commissioners FROM: Community Development Department CASE #: A2018-062 LOCATION: PROJECT NAME: 1533 Waukegan
Gate Installation Instructions
Gate Installation Instructions Every installation is unique and requires decisions to be made on the job by the installer. Specific performance requirements, soil conditions, climate conditions, and other
Applications: Section 1: Getting Started Tools Needed: BEFORE
Installation of KBD Body Kits Porsche GT 3 Look/Style 2 Piece Polyurethane Front Bumper & Lip Applications: Porsche 996: 1999-2001 Porsche Boxster 986: 1997-2004 Page 1 Tools Needed: Philips Head Screwdriver
ADJUST-A-VIEW QUARTER CIRCLE INSTALLATION INSTRUCTIONS
Omega Mfg. Corporation Two Rivers, WI (800) 874-9594 www.adjustaview.com Proudly Serving Customers Since 1976 Page 1 of 5 MATERIAL LIST ADJUST-A-VIEW User Instructions ADJUST-A-VIEW Installation Instructions
TOOLS REQUIRED FOR ASSEMBLY. Rubber Mallet or Plastic Tip Hammer PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER.
TOOLS REQUIRED FOR ASSEMBLY Rubber Mallet or Plastic Tip Hammer Top Cover Support PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER Back Stop Divider Closed 'L' Upright Slotted Reinforcement Support
VINYL PERGOLA. Structural. Recommended Tools. What's Included. SuperiorPlasticProducts.com. SuperiorPlasticProducts.com
Structural VINYL PERGOLA Recommended Tools Safety Glasses Tape Measure & Level Power Drill w/ (1/8", 1/4", 5/8") bits Hammer Drill w/ (1/8") bit Circular Saw w/ Fine Tooth Blade Rubber Mallet Ladder What's
INSTALLATION MANUAL SFM2
INSTALLATION MANUAL SFM2 Sony Electronics, Inc. 16540 West Bernardo Drive San Diego, CA 92127 www.sony.com IN-SFM2.R1 Table of Contents WARNING STATEMENTS... - 3 - PARTS LIST... - 4 - INSTALLATION TOOLS...
SECTION INTERIOR SIGNAGE
SECTION 10 14 02 INTERIOR SIGNAGE PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent referenced. The publications are referred to in the text by
SERVICE BULLETIN. SERIAL NUMBERS thru A0001 thru 402A B0001 thru 401B thru
TITLE WINGS - ACCESS PANEL INSTALLATION FOR FORWARD SPAR EFFECTIVITY REASON MODEL SERIAL NUMBERS 401 401-0001 thru 401-0322 401A 401B 401A0001 thru 401A0132 401B0001 thru 401B0221 402 402-0001 thru 402-0322
Double Beam Freestanding Pergola Installation Guide
Double Beam Freestanding Pergola Installation Guide Patent Pending. Copyright 2011 USAVinyl, LLC - All Rights Reserved The information contained in these instructions are proprietary to USAVinyl, LLC and
ARCHITECTURAL REVIEW BOARD STAFF REPORT
ARCHITECTURAL REVIEW BOARD STAFF REPORT Project #/Name Review Type ARB-2011-98: Banfield Pet Hospital Sign Certificate of Appropriateness for a Sign Parcel Identification Tax Map 32, Parcel 43 Location
CLWP6048. Classic Sign Family Wall Panel. Part Number / Specifications. 60" Wide x 48" High CHPL Panel Wall Mount. ISO / Perspective View.
ISO / Perspective View Dwg. Date: pril 7, 25 ll Drawings Copyright. WP6048HRS (Single-Sided) Standard - Rectangular Panel C Upgrade Panel Option - Horizontal rched WP6048HPS (Single-Sided) Upgrade - Peaked
INSTALL/REMOVAL INSTRUCTIONS: WINDOW REGULATOR
REMOVAL/INSTALL OF WINDOW REGULATOR (740-666) Lincoln Town Car 1990 94 General Tech Tips: Use painter s tape rather than duct tape to secure window. It will not damage paint or leave sticky residue. A
10" E-Series D-Series - Pair. kit includes (14) (4) (4) It is strongly recommended that this product be installed by a professional.
2014 GMC 1500 grille installation instructions 10" E-Series D-Series - Pair kit includes (14) (14) (4) 5 /16-18x 5 /8 Button Socket 5 /16-18 Low Profile Nylock Nut M6-1.0x30mm Button Head Socket (14) (4)
Pergola Kits USA offers two different Premium Vinyl pergola kits
Pergolas 101 Headers (beams, support rails) - Single or Double support beam, runs the width of the unit. 2 x8 profile lagged or install into post system and receives brackets for rafters. Rafters (joists)
The Chrisfield Freestanding Pergolas
You Can Do-It We Can Help 5/9/2011 The Chrisfield Freestanding Pergolas Pergola Beams: Are two hollow vinyl 2 x 8s which can be sleeved for additional structural support using pressure treated 2x8s NOT
INSTALLATION GUIDE 2009-CURRENT HUMMER H3T PRODUCT CODE:
INSTALLATION GUIDE 2009-CURRENT HUMMER H3T PRODUCT CODE: 268 June 22, 2010 TOOLS NEEDED COMPONENTS INCLUDED P2 Tip 3/8" Drill Rubber Gasket(s) x 2 Bracket(s) x 2 1/2" Drill Bit Bulkhead Flange #2 Phillips
KNIGHT CANCER INSTITUTE KNIGHT CANCER INSTITUTE
1 1/4" 1'-2" INDIVIDUAL LETTERS: Colite LP4 Face Lit Letters (or equal) with silver metallic translucent vinyl over white acrylic faces and painted opaque returns. Sign appears silver metallic during the
8030 Synergy Jeep JK Rear Long Arm Frame Brackets
General Notes: SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 8030 Synergy Jeep JK Rear Long Arm Frame Brackets These instructions are also available on our website; www.synergymfg.com.
DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: KEYING ACCESSORIES
INCH-POUND MIL-DTL-55302/31L 20 July 2007 SUPERSEDING MIL-DTL-55302/31K 9 January 2004 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: KEYING ACCESSORIES This specification
DuraRac Shelving System
GM Full Size Van Assembly Installation Instructions Sheet 1 of 13 BEFORE YOU START! IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED IN THE SPECIFIED ORDER TO ENSURE
SIGN CRITERIA CONSER CROSSING MAJOR TENANTS
SIGN CRITERIA CONSER CROSSING LOCATION: ZONING DISTRICT: Southeast Corner of 151 st & Conser Street MXD EFFECTIVE DATE: August 1, 2006 MAJOR TENANTS Major Tenants A, B, C and D as shown of Figure 1, Site
12 x 24 Flat Top Pergola
A S S E M B LY G U I D E OPTIONAL ACCESSORIES: Bolt Down Bracket Kit Privacy Wall (6 for Pergola) Pergola Planter Ver.-75 Ta b l e o f Co n t e n t s PAGE Introduction & Overview......................................................
Phantom Door Installation Manual
Tools Required: Drill Drill Bit - 1/8 drill bit for the housing Driver Bit - 25018 - #1 4 bit w/ rounded shaft or 25012 - #1 4 bit w/ hex shaft 25013 - #2 4 bit with hex shaft (depending on fasteners used
4-Door Rear XHD Armor Fenders
Page 1/10 Part #11615.02 Page 2/10 1 4 2 3 5 Components 1. Left Rear Fender (1) 2. Right Rear Fender (1) 3. Left Rear Guard (1) 4. Right Rear Guard (1) 5. License Plate Bracket (1) OMIX-ADA TECHNICAL SUPPORT
SERVICE BULLETIN. SERIAL NUMBERS thru
TITLE WINGS - ACCESS PANEL INSTALLATION FOR FORWARD SPAR EFFECTIVITY REASON MODEL SERIAL NUMBERS 425 425-0001 thru 425-0236 Customers have requested an access panel to gain easy access to the forward spar
SIG Awning / Casement / Fixed Lite 100
TYPICAL FRAME ASSEMBLY - AWNING WINDOW 07-01 85720-2 GASKET EXT FL JAMB 100 BS201 (3471) HEAD HINGED 100 86064 TRIM FIN A 83963 SCREW SQ 8G X 1.0 PAN PP SS #2 85737 GASKET EXT FL TRANSOM 85720-1 86065
GE Lighting. High Bay Lighting. (ABV-Series) imagination at work
GE Lighting Albeo LED Luminaire High Bay Lighting (ABV-Series) imagination at work Product Features Albeo continues to build on the groundbreaking ABH-Series high bay LED luminaire with its latest high
CAB APPLICATION FOR MASTER SIGNAGE PLAN
CAB APPLICATION FOR MASTER SIGNAGE PLAN Instructions: Fully complete all sections of the application form (Type or print-must be legible) Application Sections 1. Applicant 2. Master Signage Plan Requirements
Door Canopy. PDL Building Products Industrial Parkway, N. Olmsted, OH Phone:
Door Canopy Door Canopies are attractive and efficient while eliminating the need and expense of drafting and manufacturing canopies as part of the building package. Construction: 26 gauge material around
STOL CH H3-3SP Center Hinge Bracket. IMPORTANT: The Bracket 7H5-3SP is not symmetrical
7H3-3SP Center Hinge Bracket IMPORTANT: The Bracket 7H5-3SP is not symmetrical Using a square helps layout and mark the perpendicular and the hinge hole. Note: Position of 1/4 hinge hole is 115.5mm from
Illuminated Components Portfolio
Illuminated Components Portfolio PRIME PRODUCTS, INC PRIME PRODUCTS, INC. 2755 Remico, S.W., Wyoming, MI 49519 T 616.531.8970 F 616.301.0033 info@primeproductsinc.com www. primeproductsinc.com 1 At Prime
Installation Instructions
Installation Instructions Playworld Systems Model XX1407 Square Picnic Table w/coated Top & Frame Installation Preparation Recommended Crew:...Two (2) adults Installation Time:...1 man-hour Assembly View
VINYL CLASSIC FREESTANDING PERGOLA ASSEMBLY INSTRUCTIONS
P a g e 1 VINYL CLASSIC FREESTANDING PERGOLA ASSEMBLY INSTRUCTIONS Shown: 8' x 12' Vinyl Classic Pergola with 12" Top and Main Runner Spacing The design of this pergola is based on all posts being installed
10 x 10 Flat Top Two Tone Pergola
0 x 0 Flat Top Two Tone Pergola Models: Bordeaux ASSEMBLY GUIDE OPTIONAL ACCESSORIES Arch Kit System ( Arches) Privacy Fence Panel System ( Panels & Middle Post) Bolt Down Bracket Kit ( for Pergola) Ver.0-00
HOSTESS TROLLEY U.K.
SERVICE MANUAL HOSTESS TROLLEY U.K. 0312 200 15110 - HL6200DB (Mahogany) 0312 200 15210 - HL6200LB (Teak) 0312 200 15227 - HL6200GO ( Golden Oak) Service Hints Technical Data Wiring Diagram Exploded Views
DBP Technical Data Series Rev. 0 Jan. 1, Pre Assembled Door Canopies
Technical Data Series Revised: 1 January, 2011 Article IX. SECTION 9.01 PERSONAL DOOR CANOPIES...3 SECTION 9.02 ERECTION INSTRUCTIONS...4 SECTION 9.03 ERECTION ILLUSTRATIONS...7 SECTION 9.04 MULL INSTRUCTIONS
LANCASTER Railing Systems
Al u mi n u m Ra i l i n g Sy s t e m s Se c o nd a r y Ha n d r a i l A LANCASTER Railing Systems Lifetime Warranty KeyLinkFencing.com Made in the USA High Quality Aluminum Railing Lifetime Warranty The
10 x 10 Arch Top Pergola
0 x 0 Arch Top Pergola I N S T A L L A T I O N G U I D E O P T I O N A L A C C E S S O R I E S Privacy Fence Panel System ( Panels & Middle Post Included) Bolt Down Bracket Kit (Set of ) Additional Shade
33/35A Series. Devices covered by these instructions: Rim Exit Device. CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device
911402-00 Rim Exit Device 33/35A Series Installation Instructions Devices covered by these instructions: 33/35A Rim Exit Device CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device
LABEL & RATING OPTIONS
LABEL & RATING OPTIONS FIRE LABELING GUIDELINES APPLICATION MAXIMUM SIZE HOURLY RATING Single Door 4'0" wide x 10'0" high Up to 3 hour 4'3" wide x 10'0" high Up to 1-1/2 hour Pair 8'0" wide x 10'0" high
Environmental graphics
gym floor When a gym floor is being updated from the old logo, it is not necessary to replace the old logo with the new one. Ys may have a gym floor without a logo and instead feature the new logo on a
WOOD POST FD POST. Installation Guide FD POST MOUNT STAIR / ANGLE RAILING LAG STAIR / ANGLE RAILING STUD CABLE RAILING FITTINGS
Installation Guide It is the responsibility of the installer to meet or exceed all code and safety requirements, and to obtain all required building permits. These instructions are only a guide and may
4600 Series Rim Narrow Stile Exit Device Installation Instructions I-ED01162
DEVICES COVERED IN THIS DOCUMENT: 4600 Series Rim Panic Narrow Stile Exit Device 4600 Series Rim Fire Narrow Stile Exit Device OVERVIEW Outside of Door RHR LHR Inside of Door APPLICATIONS 4950 BLADE STOP
Oceanside Outdoor Vinyl Shower Kit (3 x 3 Enclosure)
Oceanside Outdoor Vinyl Shower Kit ( x Enclosure) A B ASSEMBLY GUIDE REQUIRED FOR INSTALLATION (A) Zippity Post Extension for In-Ground Installation (Sold as 4-Packs) (B) Zippity Galvanized Steel Surface
APPLICATION FOR A BUILDING PERMIT
APPLICATION FOR A BUILDING PERMIT City of San Jacinto 595 S. San Jacinto Ave San Jacinto CA 92583 95.487.7330 fax 95.654.9896 Must print legibly, submit (3) sets of building and plot plans. Fill out all
Installation Instructions
VON DUPRIN Installation Instructions 98/9947WDC Concealed Vertical Rod Exit Device Wood Door Applications Devices covered by these instructions: 98/9947WDC Concealed Vertical Rod Device 98/9947WDC-F (Fire)
33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2
911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F
A-LOOK ver 1 A-LOOK TM. Installation Manual
A-LOOK ver 1 A-LOOK TM Installation Manual Tools Required Pencil Measuring Tape Drill Hack Saw with 12D/32T Blade Jigsaw Self-Centering Punch Framing Square 7/16" Wrench Ladder 2" or 3" Paint Brush for
City of Dana Point -- Sign Design Guidelines
-- A. Introduction... 1 B. Purpose... 1 C. Applicability... 2 D. Relation to the Dana Point Sign Ordinance... 3 E. General Design Guidelines... 3 F. Design Guidelines for Specific Sign Types... 10 Page
EUROLINE CLASSIC SOLID SURFACE Installation Instructions
EUROLINE ASSIC SOLID SURFACE Installation Instructions 12/01/15 EUROLINE ASSIC SOLID SURFACE Installation Instructions Before you begin, please note the following considerations: Safety First! Please use
To give parts and instructions to replace the wing root canted rib upper cap with a new strengthened replacement cap.
Conquest SERVICE KIT TITLE CANTED RIB CAP MODIFICATION EFFECTIVITY MODEL SERIAL NUMBERS 441 441-0001 thru 441-0362 441 698 DESCRIPTION To give parts and instructions to replace the wing root canted rib
83199 Grain Tank Auger Liner John Deere 9650 STS, 9750 STS, & 9570 STS Installation Instructions
Kit Contents: #22424 Poly Panel 16 Wide X 8ft. White (Qty. 1) #22425 Poly Panel 14 Wide X 8ft. White (Qty. 1) #22147 SST Strap 2 X 24 X 15 Bend (Qty. 16) #22440 Shim White 2 X 6 X 1/8 (Qty. 6) #41596 Grain
INSTALL/REMOVAL INSTRUCTIONS: WINDOW LIFT MOTOR
REMOVAL/INSTALL OF WINDOW LIFT MOTOR (655-1503) Chevrolet S10 Blazer/Pickup, GMC S15 Jimmy/Pickup 1995 2004, Oldsmobile Bravada 1996 2001, GMC Envoy 1998 2000, Isuzu Hombre 1998 2000 General Tech Tips:
Tools Needed. 8 per column: stainless steel or hot-dipped galvanized bolts. Mallet
Structural VINYL PERGOLA SuperiorPlasticProducts.com Tools Needed Drill Safety Glasses 1 Hammer Drill & 1/2" Masonry Bit Tape Measure & Pencil Drill Bits 1/8" 1/4" 5/8" Level 8 per column: Ratchet & Sockets
Table of Contents. Prime Industries, Inc.
MARINE HARDWARE Table of Contents Deck Cleats...1-2 Chocks...2 Deck Fills...3 Top Fittings... 4-6 Pull Pins & Accessories...6-7 Noise Reduction Top Fittings... NEW!...7 Snap Hooks & Additional Hardware...8