buildingsmart International
|
|
- Cornelius Doyle
- 5 years ago
- Views:
Transcription
1 buildingsmart International buildingsmart Aquarium QTA and costing in building services/mep Bjørn K Stangeland & Lars C Christensen IFC/IFD/IDM Workshop: April 6 th 8 th 2008 Embassy Suites, Alexandria Va., USA
2 Background There is an increasing interest in doing Quantity take-off and costing from BIM using the buildingsmart standards. buildingsmart International are in the process of developing new methods to be more responsive to specific end-user needs. Statsbygg and others has approached buildingsmart International and specifically stated that they want to focus at quantity take-off, costing etc. from BIM models using open standards. They are also interested in identifying the software applications/vendors that can/will be able to provide solutions that will work in a day-to-day situation. There has already been done some good work within the same area through buildingsmart DACH (German speaking) and also NELFO/AHUS has recently done some proof of concept for electro. Previously also the Norwegian products Focus Anbud, Calcus and DDS- CAD MEP has done an implementation that uses IFC to communicate Norwegian NS3420 codes between the applications for tendering (Norwegian: "beskrivelse") As a response to the end-users request, buildingsmart International invited interested technology and software providers to a working session hosted by Norsk Teknologi (NELFO) in Oslo. This meeting took place 4th March at the address: Fridtjof Nansens vei 17, 0369 Oslo form 09:00 to 14:00. 2
3 Background The goal is to develop Exchange Requirements that define how and where quantity information should be in IFC models. The approach will be to first clearly define the actual relevant processes in the industry and then identify the need for information exchange between those processes. (Typically NS 3420 and other relevant standards will be a part of this for Norwegian users needs) Existing capabilities in both sending and receiving applications and current support from the buildingsmart standards will also be used to scope the work if necessary. The approach to the workshop will be very similar to the typical "point-to-point" (application to application) that software vendors are used to, with the main difference that IFC will be used as the transporting vehicle for the information. 3
4 Background The main focus for this session will be the building services (electro, ventilation, heating, plumbing etc.) However to make sure this is defined in an interdisciplinary consistent way (building, electro, ventilation, plumbing, structural etc.) also work done for other disciplines will be looked into. To achieve a good and consistent result and get the best possible guidance, we've invited some of the top model experts within the buildingsmart community. In addition to the Exchange Requirements, the idea is also that interested vendors will use this opportunity to provide the market with working implementations. The meeting is open to all buildingsmart/iai members. (The meeting will be in the form of a work-session, that will require basic knowledge about building SMART and IFC)GOAL 4
5 Goals Goal of Aquarium: See commitment from quantity-take-off and costing tool suppliers to participate in Aquarium See clear end-user involvement and participation in defining user needs Keep Aquarium focused on practical solutions Goal of 1.st workshop: Agree on a common vocabulary Make a status of state-of-the-art of quantity-take-off and costing tools (building services focus) Clarify and describe scope of work in this Aquarium Make a preliminary schedule of work 5
6 Participants list (revised ) Customer: V Ole Kristian Kvarsvik X Frode Mohus User organizations: V Rune Stiauren V Agnar Holen - Statsbygg - Statsbygg - Norsk Teknologi - Norsk Teknologi Solution developers: V Kenneth Solvik - Data Design System V Frode Saltkjelkvik - Arktis / ArchiCad V Arild Hovland - Focus Software? Tom Tutti - Tocoman (Jiri Hiethanen stand inn) V Øyvind Jensen - NOIS V Stefan Johnsen - NOIS V Samuli Matta - Progman Oy V Alexander Bjaaland - HolteByggsafe V Håvard Bell - SINTEF V Janne Aas-Jacobseb - EPM V Eilif Hjelseth - NTNU/UMB V Chi Lau - EPM buildingsmart: V Jøns Sjøgren V Lars Chr Christensen X Bjørn K Stangeland V Thomas Liebich V Jeff Wix - buildingsmart Norge - buildingsmart International - buildingsmart International - AEC3 / buildingsmart Int Model Support Group - AEC3 / buildingsmart Int Model Support Group 6
7 The goal is to achieve Integrated BIM in practice Conversion 2D -> BIM Model CAD 3D + Facilities Management Electrical domain Collision detection HVAC domain Thermal domain Courtesy: German IAI for Building Services 7
8 The Aquarium Development model - background International buildingsmart Alliance. Bjørn K Stangeland and Larc C Christensen. In order for buildingsmart to prosper, customers/stakeholders need to see obvious benefits from contributing to and participating in buildingsmart work and processes Three ingredients need to be present to make a good SOLUTION; a user defined problem of high value, buildingsmart standards and sw development capability The Aquarium model focus on bringing these three ingredients together in a transparent and collaborative setting where other users and software developers may join the key user and key sw developers in developing a working solution In the Aquarium the key participants are driving the process, and others can join in to observe or participate in the process The Aquarium model uses well know software development methods for specifying and creating point-to-point solutions PROBLEM FUNDING - SOLUTION 8
9 The Aquarium Development model - major contributions and tasks International buildingsmart Alliance. Bjørn K Stangeland and Larc C Christensen. High value problem statement [User(s)] buildingsmart standards [buildingsmart] sw tools and capabilities [sw developer(s)] working solution solving high value problem [buildingsmart] 9
10 Our first problem owner has understood the concept! International buildingsmart Alliance. Bjørn K Stangeland and Larc C Christensen. 10
buildingsmart International
buildingsmart International buildingsmart Aquarium QTA and costing in building services/mep Bjørn K Stangeland & Lars C Christensen IFC/IFD/IDM Workshop: April 6 th 8 th 2008 Embassy Suites, Alexandria
More informationProduct and Process Room Workshops in Oslo, March 2012
Document id Title Organisation /Author Date Status IDMC_27_5 Product and Process Room Workshops Oslo bsi/roger Grant/Jan Karlshøj 13-Mar-12 Ver. 5. Product and Process Room Workshops in Oslo, March 2012
More informationbuildingsmart work for your organization
BSAME Build SMART 2009, Abu Dhabi, 15 th November 2009 2009 multibim as business opportunities through h better digital collaboration; The buildingsmart Aquarium: a way to make buildingsmart work for your
More informationProduct and Process Room Workshops in Tokyo, October 2012
Title Organisation /Author Date Status Product and Process Room Workshops Oslo bsi/roger Grant/Jan Karlshøj 11-Oct.-12 Final Product and Process Room Workshops in Tokyo, October 2012 buildingsmart International
More informationIntegrating Design using BIM and IFC
Integrating Design using BIM and IFC Thomas Liebich AEC3, Munich, Germany tl@aec3.de www.aec3.com Company overview Founded 1997 7 employees established in 2 countries Main activities information modeling
More informationBIM Status Overview. Arto Kiviniemi Research Professor ICT for Built Environment VTT Technical Research Centre of Finland
BIM Status Overview Arto Kiviniemi Research Professor ICT for Built Environment VTT Technical Research Centre of Finland BIMs VBE Measurement Framework ICTs can have three types of business effects Markets
More informationDigitization in and of the Norwegian AEC Industry
Digitization in and of the Norwegian AEC Industry Senior Advisor Lars Chr Christensen as, Norway Waiting for the wave Synchro User Conference 2017, Oslo, Norway 1983 the digital wave 2013 «Drawing production
More informationINTERDISCIPLINARY, BIM-SUPPORTED PLANNING PROCESS
INTERDISCIPLINARY, BIM-SUPPORTED PLANNING PROCESS Lars Oberwinter Vienna University of Technology, E234 - Institute of Interdisciplinary Construction Process Management, Vienna, Austria, Vienna, Austria,
More informationTowards implementation of building information modelling in the construction industry
Towards implementation of building information modelling in the construction industry Arayici, Y, Khosrowshahi, F, Ponting, AM and Mihindu, SA Title Authors Type URL Published Date 2009 Towards implementation
More informationBIM Introduction. Building Information Management Definitions, Applications and general information. Betty Bezos
BIM Introduction Building Information Management Definitions, Applications and general information Betty Bezos betty@bezos.com 9/1/2017 1 9/1/2017 2 Innovations in BIM 3D Design: 3D visualizations allow
More informationEnergy modeling/simulation Using the BIM technology in the Curriculum of Architectural and Construction Engineering and Management
Paper ID #7196 Energy modeling/simulation Using the BIM technology in the Curriculum of Architectural and Construction Engineering and Management Dr. Hyunjoo Kim, The University of North Carolina at Charlotte
More informationBuilding Information Modeling
Building Information Modeling Gunnar Grün, Munich, 7.3.2018 Auf Wissen bauen Building Information Modeling (BIM) towards the uniform central building model BIM today (1) Used for visualization Reception
More informationAddendum to Description of Services for Building and Planning, Digital Design. The Association of of Consulting Engineers
Addendum to Description of Services for Building and Planning, 2012 8.4 Digital Design 2016 The Association of of Consulting Engineers FRI and DANSKE ARK Addendum to Description of Services for Building
More informationBuilding (Process) Room Report Jan Karlshøj, IDM Coordinator/Process Room Leader buildingsmart Building (Process) Room Toronto, October 30, 2014
Building (Process) Room Report Jan Karlshøj, IDM Coordinator/Process Room Leader buildingsmart Building (Process) Room Toronto, October 30, 2014 Building (Process) Room The Process Room were established
More informationByggNett Status Survey
II On assignment from the Norwegian building authority (DiBK), Holte Consulting has conducted a status survey of solutions and issues relevant to the development of ByggNett. The assignment has been carried
More informationThe Road to BIM through Open Collaboration and Connected Construction. Erkki Mäkinen. BIM World MUNICH 2018
The Road to BIM through Open Collaboration and Connected Construction Erkki Mäkinen BIM World MUNICH 2018 Information flow in Construction Industry How documents are shared in construction industry in
More informationIFC ALIGNMENT. Common resource for road and rail construction, bridges, tunnels First IFC extension project to address infrastructure works
IFC ALIGNMENT Common resource for road and rail construction, bridges, tunnels First IFC extension project to address infrastructure works Alignment and linear referencing as common resource Alignment
More informationwww.siliconec.com info@siliconec.com MEP Expertise Team having more than 8 years of experience in HVAC, Electrical, Plumbing and Fire Protection Team Experienced in US and British standards as well Proficient
More informationUsing Existing Standards as a Foundation for Information Related to Factory Layout Design
Using Existing Standards as a Foundation for Information Related to Factory Layout Design D. Chen, M. Hedlind, A. von Euler-Chelpin, T. Kjellberg Production Engineering, KTH - Royal Institute of Technology,
More informationMODULAR BIM GUIDELINES
MODULAR BIM GUIDELINES Eilif Hjelseth, Ph.D. student, UMB/ IMT, eilif.hjelseth@umb.no UMB / Department of Mathematical Sciences and Technology, Norway ABSTRACT This paper presents a concept for development
More informationPiping Workflow for MEP AutoCAD Piping Phil Nower Hazen and Sawyer
Piping Workflow for MEP AutoCAD Piping Phil Nower Hazen and Sawyer MP3512-L: In this class we will harness the power of MEP Data in AutoCAD. We will review the workflow to fully utilize this Data throughout
More informationBIM Won t Work as a Deliverable, Will It? Dace A. Campbell, AIA, LEED AP (Moderator)
BIM Won t Work as a Deliverable, Spring BIMForum San Diego, CA Hilton San Diego Bayfront April 29-30, 2015 Will It? Dace A. Campbell, AIA, LEED AP (Moderator) @DaceCampbell Learning Objectives 1. Gain
More informationPotentials and Barriers for Implementing BIM in the German AEC Market
Potentials and Barriers for Implementing BIM in the German AEC Market Results of a current market analysis Petra von Both Karlsruhe Institute for Technology, Department Building Lifecycle Management, Germany
More informationNational BIM Standard - United States Version 3
National BIM Standard - United States Version 3 5 Practice Documents 5.5 Mechanical, Electrical, Plumbing, And Fire Protection Systems (MEP) Spatial Coordination Requirements for Construction Installation
More informationWhite paper The Quality of Design Documents in Denmark
White paper The Quality of Design Documents in Denmark Vers. 2 May 2018 MT Højgaard A/S Knud Højgaards Vej 7 2860 Søborg Denmark +45 7012 2400 mth.com Reg. no. 12562233 Page 2/13 The Quality of Design
More informationBIM and Urban Infrastructure
BIM and Urban Infrastructure Vishal Singh Assistant Professor Department of Civil and Structural Engineering, Aalto University 14 th September 2015 Learning objectives Describe the underlying concepts
More informationAnalysis 3. Immersive Virtual Modeling for MEP Coordination. Penn State School of Forest Resources University Park, PA
Analysis 3 Immersive Virtual Modeling for MEP Coordination Background When looking at the entire process of constructing a building, from the design phase through construction and turnover to the owner,
More informationPlease comply with the Lean Construction Institute s Usage Policies and Attribution Guidelines at
Please comply with the Lean Construction Institute s Usage Policies and Attribution Guidelines at http://www.leanconstruction.org/usage.pdf when using this file. Thank you. BIM & THE VALUE STREAM LCI:
More informationWhy make classification based on international standards?
Why make classification based on international standards? A status on CCS and CoClass, and examples of how findings are taken up by other industries (infrastructure, shipbuilding and airplanes) ICIS DA,
More informationProposal for Workshop
The 26th European Conference on Information Systems 23 28 June 2018 Proposal for Workshop Title of the workshop Platformization in the Public Sector: Please visit: www.platformization.org Main Contact
More informationMEP Coordination. Ir. Dr. Sam C. M. Hui Faculty of Science and Technology
SBS5411 Building Information Modelling for BSE http://ibse.hk/sbs5411/ MEP Coordination Ir. Dr. Sam C. M. Hui Faculty of Science and Technology E-mail: cmhui@vtc.edu.hk Oct 2018 Contents Introduction Clash
More informationUsing BIM to follow up milestones in a project plan during the design phase
Building Information Modelling (BIM) in Design, Construction and Operations 97 Using BIM to follow up milestones in a project plan during the design phase Ø. Mejlænder-Larsen Norwegian University of Science
More informationTutorials.
Tutorials http://www.incose.org/emeasec2018 T1 Model-Based Systems Engineering (MBSE) goes digital: How digitalization and Industry 4.0 will affect systems engineering (SE) Prof. St. Rudolph (University
More information2013 A Giant Leap Forward for openbim
December 2013 Issue 10 Official Publication of the buildingsmart UK User Group 2013 A Giant Leap Forward for openbim In this issue: Page 3 Page 6 Page 10 Page 12 The Rise of the User in the Development
More informationJBIM. No BIM for You: The Case for Not Doing BIM. Journal of Building Information Modeling
JBIM Journal of Building Information Modeling An official publication of the National Institute of Building Sciences buildingsmart alliance National Institute of Building Sciences: An Authoritative Source
More informationSession 3 _ Part A Effective Coordination with Revit Models
Session 3 _ Part A Effective Coordination with Revit Models Class Description Effective coordination relies upon a measured strategic approach to using clash detection software. This class will share best
More informationAgenda 1 Introduction 2 Navisworks Overview
Agenda 1 Introduction 2 Navisworks Overview BIM for Contractors: Autodesk Navisworks from Design to Construction to Facilities Management David Epps Manager Building Information Modeling Holder Construction
More informationUtilization of Revit Applications as Preliminary Shop Drawings to Improve Construction processes
Utilization of Revit Applications as Preliminary Shop Drawings to Improve Construction processes Allbban H. Khalid Southern Polytechnic State University, 1100 South Marietta Parkway, Marietta GA 30067
More informationAutodesk Revit MEP Learning Essentials Training Course Outline
Module 00 Revit in a Nutshell Interactive exercise on creating and documenting a basic building Module 01 Introduction to the Principles of BIM Simple Truths Behind the hype The benefits of BIM What will
More informationIdentification and Reduction of Risks in Remote Operations of Offshore Oil and Gas Installations
Identification and Reduction of Risks in Remote Operations of Offshore Oil and Gas Installations S. O. Johnsen, M.A.Lundteigen/SINTEF H.Fartum/STATOIL John Monsen/Norsk Hydro 1 Safety Challenges Introduction
More informationRole of BIM. in Plumbing System -K Chandrakanth and M Vinay Kumar. Abstract. 3 Dimension. Introduction: Collaborative Design:
Role of BIM in Plumbing System -K Chandrakanth and M Vinay Kumar Abstract As we look at the plumbing industry, especially in the building sector from design stage to operation & maintenance, huge amount
More informationWhat is BIM and why should construction lawyers care about it? Dr. Carrie Sturts Dossick, P.E. Bita Astaneh Asl
What is BIM and why should construction lawyers care about it? Dr. Carrie Sturts Dossick, P.E. Bita Astaneh Asl Learning Objectives What is BIM? > BIM definition > BIM history > Common current uses (3D
More informationFrench Speaking Chapter Status Report October 2014
French Speaking Chapter Status Report October 2014 Contacts Chair Technical Coordinator IDM Contact International User Group Delegate Local Implementers Support Group Open Infra coordinator French Product
More informationFINAL proposal for Scope, Business Plan and initial Work Programme
. FINAL proposal for Scope, Business Plan and initial Work Programme CEN/TC XXX Building Information Modelling (BIM) CEN/TC XXX Business Plan Date:2014-12-10 Version: Final proposal Page: 1 Proposal developed
More informationLICENSING THE PALLAS-REACTOR USING THE CONCEPTUAL SAFETY DOCUMENT
LICENSING THE PALLAS-REACTOR USING THE CONCEPTUAL SAFETY DOCUMENT M. VISSER, N.D. VAN DER LINDEN Licensing and compliance department, PALLAS Comeniusstraat 8, 1018 MS Alkmaar, The Netherlands 1. Abstract
More information1 Introduction. M.Rajabi a, T.Bigga b and M.A.Bartl c.
Optimization of the quantity take-off (QTO) process for Mechanical, Electrical and plumbing (MEP) trades in tender estimation phase of the construction projects M.Rajabi a, T.Bigga b and M.A.Bartl c a
More informationThe Manufacturers Perspective
Making BIM work for product manufacturers The Manufacturers Perspective Chris Witte Thank you BIM has been the preserve of Architects and Main Contractors The Manufacturers BIM continuum Stakeholder Management
More informationSelecting, Developing and Designing the Visual Content for the Polymer Series
Selecting, Developing and Designing the Visual Content for the Polymer Series A Review of the Process October 2014 This document provides a summary of the activities undertaken by the Bank of Canada to
More information2008 Autodesk Autodesk
2008 Autodesk 2008 Autodesk 2008 Autodesk 2008 Autodesk 2008 Autodesk Designing Sustainable & Smart Cities Sunil M K, Architect, RIBA Senior Industry Program Manager, AEC Industry Strategy and Relations
More informationStrategic Plan for CREE Oslo Centre for Research on Environmentally friendly Energy
September 2012 Draft Strategic Plan for CREE Oslo Centre for Research on Environmentally friendly Energy This strategic plan is intended as a long-term management document for CREE. Below we describe the
More informationAutodesk Revit MEP Fundamentals
Autodesk Revit MEP Fundamentals Course Length: 4 days To take full advantage of Building Information Modeling, the Autodesk Revit MEP: Fundamentals training course has been designed to teach the concepts
More informationC R I O P. a scenario based risk analysis of control centres.
C R I O P a scenario based risk analysis of control centres CRIOP verification and validation of control centre CRIOP is a human factors (HF) based method to verify and validate the ability of a control
More informationPublic BIM-based model checking solutions: lessons learned from Singapore and Norway
Building Information Modelling (BIM) in Design, Construction and Operations 421 Public BIM-based model checking solutions: lessons learned from Singapore and Norway E. Hjelseth Department of Civil Engineering
More informationInternational opportunities BouwConnect library threats and opportunities for expansion of BouwConnect to the German construction market
Eindhoven University of Technology MASTER International opportunities BouwConnect library threats and opportunities for expansion of BouwConnect to the German construction market Heijmans, V.J. Award date:
More informationQuote Roller Contest Proposal
Quote Roller Contest Proposal Prepared For Quote Contest Quote Roller Created By Dustin Gruetter DC Building 888-975-2057 dustin@dcbuilding.com http://www.dcbuilding.com Your Proposal March 24, 2014 Proposal
More informationSouth West Public Engagement Protocol for Wind Energy
South West Public Engagement Protocol for Wind Energy October 2004 South West Renewable Energy Agency Sterling House, Dix s Field, Exeter, EX1 1QA Tel: 01392 229394 Fax: 01392 229395 Email: admin@regensw.co.uk
More informationBIM+Blockchain: A Solution to the "Trust" problem in Collaboration?
BIM+Blockchain: A Solution to the "Trust" problem in Collaboration? Link to conference paper http://arrow.dit.ie/bescharcon/26/ Malachy Mathews, Senior Lecturer, School of Architecture, Dublin Institute
More informationThe ISO Revision: Looking back and into the future
An Advanced Guide to ISO 26262 - ebook : Looking back and into the future Part 2 www.iso26262-conference.com : Looking back and into the future The 5th International Conference ISO 26262 will bring together
More informationSamuel Hudson BIM Support Specialist. Jeff Owens AIA, LEED AP
BIM Preparation for the USACE Lessons Learned in Conversion from REVIT to BENTLEY BIM Presenters: Samuel Hudson BIM Support Specialist Jeff Owens AIA, LEED AP L E ll Lee Ezell Consulting BIM Specialist
More informationBuilding BIM in Australia: A Retrospective and Prospective Analysis
Building BIM in Australia: A Retrospective and Prospective Analysis Professor Keith Hampson Sustainable Built Environment National Research Centre, Australia Co-author: Professor Robin Drogemuller Professor
More informationRecommendations from the nomination committee of Norwegian Property ASA
Recommendations from the nomination committee of Norwegian Property ASA The nomination committee of Norwegian Property ASA comprises: Marianne E. Johnsen, chair Jan Ole Stangeland, member Espen D. Westeren,
More informationReport OIE Animal Welfare Global Forum Supporting implementation of OIE Standards Paris, France, March 2018
Report OIE Animal Welfare Global Forum Supporting implementation of OIE Standards Paris, France, 28-29 March 2018 1. Background: In fulfilling its mandate to protect animal health and welfare, the OIE
More information39 Years of Learning the Hard Way. Mark A Etrheim, Mastercraft Homes Inc
39 Years of Learning the Hard Way Mark A Etrheim, Mastercraft Homes Inc Marketing- You need to tell the world how good you are! Clear and consistent message. What makes you unique? Sales- You must be able
More informationNOW and NEXT BIM THE CONSTRUCTION PUZZLE- HOW TO MAKE EVERYONE WORK COLLABORATIVELY?
BIM An advanced tool to reduce costs and support environmental design in the UK NOW and NEXT THE CONSTRUCTION PUZZLE- HOW TO MAKE EVERYONE WORK COLLABORATIVELY? Building information Modelling Is an industry
More informationUse of 4D BIM for general contractors
Use of 4D BIM for general contractors With focus on constructability analysis through clash detection and 4D simulation Master thesis - April 2012 Technical University of Denmark Author: Lars Peter Lennert
More informationVanderbilt University Standard Specification Revised 2/6/08
SECTION 01 78 23 OPERATION AND MAINTENANCE DATA PART 1 GENERAL 1.01 RELATED SECTIONS A. Section 01 77 00 Closeout Procedures B. Section 01 78 39 Project Record Documents 1.02 SUMMARY A. This section provides
More informationPrecast Concrete BIM Standards Meeting
Precast Concrete BIM Standards Meeting bsa Conference, January 8, 2013 Chuck Eastman Shiva Aram Manu Venugopal Rafael Sacks Ivan Panushev MVD For Precast Concrete Chair: Michael LaNier BERGER/ABAM Engineers
More informationWHITE PAPER FACILITY FOCUS: Next Generation Aseptic Manufacturing: An Eye-Opening Peek into the Future. By: Hite Baker
WHITE PAPER FACILITY FOCUS: Next Generation Aseptic Manufacturing: An Eye-Opening Peek into the Future By: Hite Baker August 2017 Introduction This Facility Focus Survey Report explores how to design sterile
More informationCertificate by the Architect: Certified that no addition and deletion has been made to the tender documents downloaded from the IIT Madras web site.
INDIAN INSTITUTE OF TECHNOLOGY MADRAS ENGINEERING UNIT CHENNAI 600 036 NOTICE INVITING TENDERS FOR APPOINTMENT OF ARCHITECTURAL CONSULTANT No: 35/ ARC / 2013 14 TECHNICAL BID COVER 2 NAME OF WORK: Providing
More informationBenchmark of Alberta s AEC Industries Knowledge of Building Information Modeling (BIM)
Benchmark of Alberta s AEC Industries Knowledge of Building Information Modeling (BIM) Basel Abdulaal, Ahmed Bouferguene, Mohamed Al-Hussein Department of Civil & Environmental Engineering Hole School
More informationARCHITECTURE AND UNIVERSAL DESIGN IN THE DESIGNER S EYE J.E. Andersson KTH Architecture Semester A
ARCHITECTURE AND UNIVERSAL DESIGN IN THE DESIGNER S EYE J.E. Andersson KTH Architecture Semester A 2013-2014 T.J.W.G. Steegh 19882802T595 December 10th 2013 BIM 3 HOW TO IMPROVE CURRENT AVAILABLE SOFTWARE
More informationBs1192 Construction Drawing Practice Bing
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with bs1192 construction
More informationOffice for Nuclear Regulation
Summary of Lessons Learnt during Generic Design Assessment (2007 2013) ONR-GDA-SR-13-001 Revision 0 September 2013 1 INTRODUCTION 1 The purpose of this document is to provide a summary of the key lessons
More informationRoadmap for implementation of BIM in the UK construction industry
Roadmap for implementation of BIM in the UK construction industry Khosrowshahi, F and Arayici, Y http://dxdoiorg/101108/09699981211277531 Title Authors Type URL Roadmap for implementation of BIM in the
More informationAT&T and Walt Disney Parks & Resorts
A MAGICAL COLLABORATION: AT&T AT&T and Walt Disney Parks & Resorts Background AT&T is the world s largest telecommunications company with its origin dating back to Alexander Graham Bell s invention of
More informationThe European statement of principles on human machine interaction 2005
The European statement of principles on human machine interaction 2005 Alan Stevens 1*, Anders Hallen 2, Annie Pauzie 3, Bénédicte Vezier 4, Christhard Gelau 5, Lutz Eckstein 6, Trent Victor 7, Winfried
More informationBIM Awareness and Acceptance by Architecture Students in Asia
BIM Awareness and Acceptance by Architecture Students in Asia Euisoon Ahn 1 and Minseok Kim* 2 1 Ph.D. Candidate, Department of Architecture & Architectural Engineering, Seoul National University, Korea
More informationGlossary. These terms were specifically chosen by the chapter authors as important for understanding of their key concepts.
Building Information Modeling: BIM in Current and Future Practice By Karen M. Kensek and Douglas Noble Copyright 2014 by John Wiley & Sons, Inc. Glossary These terms were specifically chosen by the chapter
More informationWhy Moving from AutoCAD to AutoCAD MEP Just Makes Sense!
AUTOCAD MEP Why Moving from AutoCAD to AutoCAD MEP Just Makes Sense! If you create building mechanical, electrical, or plumbing (MEP) construction documents and are currently working with AutoCAD software
More informationREAL BIM OBJECTS GET ACCESS TO THOUSANDS OF FROM REAL MANUFACTURERS AND BRANDS. Products. Downloads. Brands
www.bimobject.com GET ACCESS TO THOUSANDS OF REAL BIM OBJECTS FROM REAL MANUFACTURERS AND BRANDS 2008000+ Downloads 4500+ Products 280+ Brands BIM OBJECTS The fundamental building blocks of Building Information
More informationCOMPETITIVE ADVANTAGES AND MANAGEMENT CHALLENGES. by C.B. Tatum, Professor of Civil Engineering Stanford University, Stanford, CA , USA
DESIGN AND CONST RUCTION AUTOMATION: COMPETITIVE ADVANTAGES AND MANAGEMENT CHALLENGES by C.B. Tatum, Professor of Civil Engineering Stanford University, Stanford, CA 94305-4020, USA Abstract Many new demands
More informationCIFECENTER FOR INTEGRATED FACILITY ENGINEERING
CIFECENTER FOR INTEGRATED FACILITY ENGINEERING Industrial Case Study of Electronic Design, Cost, & Schedule Integration By Sheryl Staub-French Martin Fischer CIFE Technical Report #122 January, 2001 STANFORD
More informationHANS HUBERS Delft University of Technology, the Netherlands
COLLABORATIVE PARAMETRIC BIM Delft University of Technology, the Netherlands j.c.hubers@tudelft.nl Abstract. Digital architectural design actually is dominated by Building Information Modeling (BIM) and
More informationTHE KENYA POWER AND LIGHTING CO. LTD. SPECIFICATIONS for IMPULSE VOLTAGE TEST EQUIPMENT
THE KENYA POWER AND LIGHTING CO. LTD SPECIFICATIONS for IMPULSE VOLTAGE TEST EQUIPMENT NAME DESIGNATION SIGNATURE DATE Compiled by Ephantus Nyagah Ag. Senior Engineer Checked by Eng. Thagichu Kiiru Deputy
More informationPeter Caplehorn Deputy Chief Executive and Policy Director Construction Products Association
ASFP AGM 2015 Guest Presentation Peter Caplehorn Deputy Chief Executive and Policy Director Construction Products Association Pioneering fire protection through innovation and professionalism BIM NOW and
More informationTECHNICAL RISK ASSESSMENT: INCREASING THE VALUE OF TECHNOLOGY READINESS ASSESSMENT (TRA)
TECHNICAL RISK ASSESSMENT: INCREASING THE VALUE OF TECHNOLOGY READINESS ASSESSMENT (TRA) Rebecca Addis Systems Engineering Tank Automotive Research, Development, and Engineering Center (TARDEC) Warren,
More informationBuilding information modelling Experts views on standardisation and industry deployment
Available online at www.sciencedirect.com ADVANCED ENGINEERING INFORMATICS Advanced Engineering Informatics 22 (2008) 271 280 www.elsevier.com/locate/aei Building information modelling Experts views on
More informationSTOA Science and Technology Options Assessment
STOA Science and Technology Options Assessment Delegation report: Joint Research Centre (JRC) - Ispra - Italy 11 May 2012 Paul Rübig MEP, first STOA Vice-Chair, leading the delegation Malcolm Harbour MEP,
More informationUN GA TECHNOLOGY DIALOGUES, APRIL JUNE
UN GA TECHNOLOGY DIALOGUES, APRIL JUNE 2014 Suggestions made by participants regarding the functions of a possible technology facilitation mechanism Background document by the Secretariat for the fourth
More informationAn Evidence Based Future for Buildings. The Living Lab.
An Evidence Based Future for Buildings. The Living Lab. A N D R E W B U L L M O R E P A R T N E R, H O A R E L E A C I B S E T E C H N I C A L S Y M P O S I U M R E F 1 6 8 Contents. The story so far.
More informationImplementing an Effective Model-based Coordination Review Strategy USACE/Industry BIM and CIM Consortia 7 Nov 2017
Implementing an Effective Model-based Coordination Review Strategy USACE/Industry BIM and CIM Consortia 7 Nov 2017 The views, opinions and findings contained in this report are those of the authors(s)
More informationBuilding Information Modeling: An Academic Perspective
Building Information Modeling: An Academic Perspective by Vivek Sah Purdue University Building Construction Management vsah@purdue.edu Clark Cory Purdue University Computer Graphics Technology ccory@purdue.edu
More informationUK Government Building A New World
CONSTRUCTION 4.0 CONFERENCE CONSTRUCTION DIGITALIZATION CHALLENGE AND CIVIL ENGINEERING IN THE CONTEXT OF INDUSTRY 4.0 UK Government Building A New World Digital Built Britain Sector Digitalisation March
More informationTRANSLATING RESEARCH INTO PRODUCTIVITY: RETHINKING LINKAGES
TRANSLATING RESEARCH INTO PRODUCTIVITY: RETHINKING LINKAGES Customs House 399 Queen Street, Brisbane 9 August 2013 Workshop Program and Issues Paper Translating Research into Productivity: Rethinking Linkages
More informationA/E REVIEW CHECKLIST HVAC
A/E CHECKLIST HVAC Reviewers should - Use Checklists when reviewing any type of VA construction project for the following disciplines: Site and Landscape, Architectural, Structural, Plumbing, Fire Protection,
More information***************************************************************************** DRAFT UFGS- 01 XX XX (FEB 2014)
DRAFT UFGS- 01 XX XX (FEB 2014) ------------------------ Drafting Activity: USACE UNIFIED FACILITIES GUIDE SPECIFICATION SECTION TABLE OF CONTENTS DIVISION 01 GENERAL REQUIREMENTS SECTION 01 XX XX (FEB
More informationJPO s recent developments
JPO s recent developments IP5 Heads of Office with IP5 Industry Meetings 31 May 2017 Japan Patent Office Changes in Number of Patent Applications and Registrations Numbers of Patent Applications, Patent
More informationBridging the gap: taking BIM to the construction site
Bridging the gap: taking BIM to the construction site Ketil Bråthen, keb@fafo.no Fafo, Norway Anita Moum, anita.moum@sintef.no SINTEF Building and Infrastructure & Norwegian University of Science and Technology,
More informationSupporting Planning and Engineering Processes at XFEL Examples, Benefits and Experience
Supporting Planning and Engineering Processes at XFEL Examples, Benefits and Experience Lars Hagge, Benno List SLAC, 31.03.2014 Agenda > Introduction: Collaborative Engineering > Collaborative Design &
More informationTAHFM Interlink Prefab is FAB?
TAHFM Interlink 2015 Prefab is FAB? Panelists PRESENTERS: Nemours/Alfred I. Dupont Hospital for Children PRESENTERS: Jeff Kent, Managing Director of Corporate Facilities, Nemours Foundation Skanska FKP
More information