ASSEMBLY INSTRUCTIONS

Transcription

1 PAGE - MDE # 9033N3-ABC-KD-U ASSEMBY INSTRUCTINS U / U MISSIN BUNKBED WITH DRAWERS MDE # 9033N3-ABC-KD-U 81 7/8 68 ½ 60 ½ WE ARE HERE T HEP! We do our best to insure that your furniture arrives in excellent condition. In the event that a part is damaged or missing, inon Home Decor will be happy to provide you with replacement parts, at no charge, within 30 days of purchase, providing the parts are available in our warehouse and the item purchased are part of our current inventory. In order to receive spare parts, at no charge, you must provide proof of purchase within 30 days. If you need assistance with assembly or replacement parts, please call inon Customer Service, prior to returning the item to the store. ur office is open Monday riday 9AM 5PM, Eastern Standard Time. ur Toll free customer service number is: r visit our web site to order spare parts and for care instructions on your newly purchased furniture. INN HME DECR PRDUCTS,INC. IMPRTANT PEASE READ A INSTRUCTINS IN THIS BKET BERE STARTING ASSEMBY MADE IN BRAZI R INN HME DECR PRDUCTS,INC. SC2/069

2 PAGE 2 - MDE # 9033N3-ABC-KD-U HARDWARE PACKAGE CUNT PEN HARDWARE PACKAGE N A AT SURACE CVERED WITH NEWSPAPER.CUNT EACH PIECE HARDWARE T MATCH THE UANTITY NUMBER IN THE HARDWARE IDENTIICATIN CUMN.CA CUSTMER SERVICE I ANY THE PARTS ARE MISSING.W THE ETTER IDENTIICATIN WHEN READING THE ASSEMBY DRAWING A THRUGH. HARDWARE IDENTIICATIN 32 WDEN DWE 2 NG K M WDEN DWE 3 1/2 NG SCREW 1/4 x 5 1/8 NG SCREW 3 7/8 NG SCREW 2 NG SCREW 5/8 NG SCREW 1 3/8 NG SCREW 1 1/8 NG EIPSE NUT AEN WRENCH WDEN DWE 3 1/8 NG WDEN DWE 1 1/8 NG META HK

3 PAGE 3 - MDE # 9033N3-ABC-KD-U N P META HK SCREW 5 1/8 NG SCREW 1 NG PASTIC HE CVERS IMPRTANT: PEASE USE A THE HARDWARE MENTINED ABVE: THIS WI ASSURE THE ITEM STABIITY AND SAETY. TS REUIRED A STANDARD PHIIPS HEAD SCREWDRIVER (NT PRVIDED) AND AN AEN WRENCH (PRVIDED- ) ARE REUIRED T ASSEMBE THIS UNIT.USE A PASTIC HEAD MAET T NTE: TAP IN WDEN DWES (NT PRVIDED) A PIECE WD CAN AS BE USED T KNCK IN WDEN DWES. BERE ASSEMBY CEAR A ARGE AREA T ASSEMBE BTH BEDS, SPREAD NEWSPAPER R CARPET R T PRTECT THE WD INISH DURING ASSEMBY. TEST BUNKBEDS R ANY MVEMENT R SE SCREWS/BTS. MEASURE INSIDE MATTRESS AREA BERE RDERING YUR UPPER AND WER MATTRESS. If any parts are missing or damaged in this package Home Decor will be happy to provide you with replacement parts, at no charge, within 30 days of purchase, providing the parts are available in our warehouse and the item purchased is part of our current inventory. In order to receive spare parts, at no charge, you must provide proof of purchase within 30 days. Call us toll free at r visit our web site to order spare parts and for care instructions on your newly purchased furniture.

4 PAGE 4 - MDE # 9033N3-ABC-KD-U PART IDENTIICATIN 1- WER TBARD AND HEADBARD PSTS(2x) - BED RAME (WITH HES T 2- WER TBARD AND HEADBARD PSTS(2x) ATTACH ADDER) (1x) 3- UPPER ET HEADBARD PST 13- RAI R ADDER (2X) 4- UPPER RIGHT HEADBARD PST 14- NG GUARD RAI (2X) 5- UPPER RIGHT TBARD PST 15- REINRCEMENT CRSSBAR (2X) 6- UPPER ET TBARD PST 16- SHRT GUARD RAI ET PST 7- HEADBARD AND TBARD (4x) 8- ADDER TREAD (4X) 17- SHRT GUARD RAI RIGHT PST 18- SHRT GUARD RAI (2X) 9- HEADBARD AND TBARD PANE (4X) 19- MATTRESS SUPPRT SATS(2x) 10-RAI (4X) 20- SATS SUPPRT -BED RAME (3X) 21- UPPER TP TRIM 22- WER TP TRIM If any parts are missing or damaged in this package Home Decor will be happy to provide you with replacement parts, at no charge, within 30 days of purchase, providing the parts are available in our warehouse and the item purchased is part of our current inventory. In order to receive spare parts, at no charge, you must provide proof of purchase within 30 days. Call us toll free at r visit our web site to order spare parts and for care instructions on your newly purchased furniture.

5 STEP 1) PAGE 5 - MDE # 9033N3-ABC-KD-U 1.1. INSERT (24) WDEN DWES (K) INT THE PRE-DRIED HES CATED AT THE EDGES HEADBARD AND TBARD # 07 (4X) AND HEADBARD AND TBARD RAIS # 10(4X), AS SHWN N DRAWING INSERT (16) WDEN DWES () INT THE PRE-DRIED HES CATED AT THE EDGES WER TBARD AND HEADBARD PST # (2X) AND # 02(2X), UPPER ET HEADBARD PST # 03, UPPER RIGHT HEADBARD PST #, UPPER RIGHT TBARD PST # 05 AND UPPER ET TBARD PST # 06, AS SHWN N DRAWING. K K K 07X4 10 X4 K K K X2 X

6 STEP 2) PAGE 6 - MDE # 9033N3-ABC-KD-U 3.1 INSERT (32) WDEN DWES (A) INT THE PRE-DRIED HES CATED AT THE EDGES PIECES: BED RAME # (3X), BED RAMES (WITH HES T ATTACH ADDER) #, NG GUARDRAI #14 (2X), SHRT GUARDRAI #18 (2X) AND ADDER TREADS #08 (4X). USE THE PRE- DRIED HES AS GUIDE, AS SHWN N DRAWING AND DETAI. 3x 08 4X 14 X2 18 2x

7 STEP 3) PAGE 7 - MDE # 9033N3-ABC-KD-U 3.1. IX PIECES: UPPER HEADBARD AND TBARD PSTS # 03, #, # 05 AND # 06 T HEADBARD AND TBARD # 07 (2X), HEADBARD AND TBARD PANE # 09 (2X) AND RAI # 10 (2X) USING () SCREWS (), AN AEN WRENCH ( - PRVIDED), THE GRVES, THE PRE-DRIED HES AS GUIDE AND THE WDEN DWES AREADY INSERTED, AS SHWN N DRAWING IX (02) META PATES (N) T HEADBARD AND TBARD # 07 (2X) USING (4) SCREWS (), A PHIIPS HEAD SCREWDRIVER (NT PRVIDED) AND THE PRE-DRIED HES AS GUIDE, AS SHWN N DRAWING AND DETAI N N

8 STEP 4) PAGE 8 - MDE # 9033N3-ABC-KD-U 4.1. IX PIECES: WER HEADBARD AND TBARD PSTS # (2X) AND # 02 (2X) T HEADBARD AND TBARD # 07 (2X), HEADBARD AND TBARD PANE # 09 (2X) AND RAI # 10 (2X) USING () SCREWS (), AN AEN WRENCH ( - PRVIDED), THE GRVES, THE PRE-DRIED HES AS GUIDE AND THE WDEN DWES AREADY INSERTED, AS SHWN N DRAWING IX (02) META PATES (N) T HEADBARD AND TBARD # 07 (2X) USING (4) SCREWS (), A PHIIPS HEAD SCREWDRIVER (NT PRVIDED) AND THE PRE-DRIED HES AS GUIDE, AS SHWN N DRAWING AND DETAI. N N

9 STEP 5) PAGE 9 - MDE # 9033N3-ABC-KD-U 5.1. IX UPPER TP TRIM # 21 (2X) T UPPER HEADBARD AND TBARD PSTS # 03, #, # 05 AND # 06 USING (6) SCREWS (H), A PHIIPS HEAD SCREWDRIVER (NT PRVIDED), THE PRE-DRIED HES AS GUIDE AND THE WDEN DWES AREADY INSERTED, AS SHWN N DRAWING INSERT (6) PASTIC HE CVERS () INT THE HES CATED AT UPPER TP TRIM # 21 (2X), AS SHW N DRAWING. H H H H H H

10 STEP 6) PAGE 10 - MDE # 9033N3-ABC-KD-U 6.1. IX WER TP TRIM # 22 (2X) T WER HEADBARD AND TBARD PSTS # (2X) AND # 02 (2X) USING (6) SCREWS (H), A PHIIPS HEAD SCREWDRIVER (NT PRVIDED), THE PRE-DRIED HES AS GUIDE AND THE WDEN DWES AREADY INSERTE, AS SHWN N DRAWING INSERT (2) PASTIC HE CVERS () INT THE HES CATED AT WER TP TRIM # 22 (2X), AS SHW N DRAWING. H H H H H 22 H 02

11 STEP 7) PAGE - MDE # 9033N3-ABC-KD-U YU SHUD START ASSEMBING THE WER BED 7.1. ATTACH BED RAMES # (2X) T WER HEADBARD AND TBARD PSTS # AND # 02 INSERTING THE WDEN DWES CATED AT BTH ENDS BED RAMES # (2X), AS SHWN N DRAWING BEW PRCEED SCREWING INSERTING () SCREWS ( C ) RM UTSIDE WER HEADBARD PSTS # (1X) AND #02 (1X) REACHING RESPECTIVE () EIPSE NUTS (I) THAT SHUD BE PSITINED INT HES CATED AT INNER SIDE BED RAME #. SCREW THEM USING AN AEN WRENCH (PRVIDED ) AS SHWN N DRAWING AND DETAI.. NTE: WHEN YU IX THE BED RAME # (2X), PEASE MAKE SURE THE PRE-DRIED HES ARE AIGNED VERTICAY, AS PER DETAI. 02 STEP 8) 8.1. PRCEED IN THE SAME WAY AS STEP 7.1 AND 7.2 T ATTACH BED RAME # (2X) T PSTS # AND #02, AS SHWN N DRAWING INSERT () WDEN DWES (B) INT HES CATED N WER TP TRIM # 22 (2X), AS SHWN N DRAWING 02 B B B B 02

12 STEP 9) PAGE - MDE # 9033N3-ABC-KD-U NW YU SHUD START ASSEMBING THE UPPER BED 9.1.ATTACH BED RAMES # (1X) AND # T UPPER HEADBARD AND TBARD PSTS # 03 AND # INSERTING THE WDEN DWES CATED AT BTH ENDS BED RAMES # (1X) AND #, AS SHWN N DRAWING BEW PRCEED SCREWING INSERTING () SCREWS ( C ) RM UTSIDE UPPER HEADBARD PSTS #03 AND # REACHING RESPECTIVE () EIPSE NUTS (I) THAT SHUD BE PSITINED INT HES CATED AT INNER SIDE BED RAMES # AND #. SCREW THEM USING AN AEN WRENCH (PRVIDED ), AS SHWN N DRAWING AND DETAI ATTACH NG GUARDRAI #14 (2X) T UPPER RIGHT HEADBARD PST # INSERTING WDEN DWES CATED AT BTH ENDS GUARDRAI INT RESPECTIVE HES CATED AT UPPER RIGHT HEADBARD PST #, AS SHWN N DRAWING. IX NG GUARDRAI # 14 (2X) T UPPER RIGHT HEADBARD PST # USING (02) SCREWS (D) AND AN AEN WRENCH (PRVIDED ) AS SHWN NDRAWING. NTE 1: WHEN YU IX THE BED RAME # (2X), PEASE MAKE SURE THE PRE-DRIED HES ARE AIGNED VERTICAY, AS PER DETAI. NTE2: PAY CSE ATTENTIN T THE PRE-DRIED HES CATED AT GUARDRAI #14 (2X). THEY SHUD BE PSITINED EXTERNAY, R A PRPER UTURE ASSEMBY REINRCEMENT CRSSBAR # 15 (2X) T THE GUARDRAI # 14 (2X) STEP 10) PRCEED IN THE SAME WAY AS STEP 9.1, 9.2 AND 9.3. T ATTACH BED RAME # (1X), # AND NG GUARDRAIS # 14 (2X) T UPPER TBARD PSTS # 05 AND #06, AS SHWN N DRAWING

13 STEP ) PAGE 13 - MDE # 9033N3-ABC-KD-U.1. IX SECURE REINRCEMENT CRSSBAR #15 (2X) T NG GUARDRAIS # 14 (2X) AND BED RAME # (1X) USING (06) SCREWS (H) AND A PHIIPS HEAD SCREWDRIVER (NT PRVIDED), THRUGH THE PRE-DRIED HES CATED AT PIECES # 14 (2X),AS SHWN N DRAWING. NTE: THE REINRCEMENT CRSSBAR # 15 (2X), SHUD BE IXED WITH ITS GRVED HES PSITINED EXTERNAY, R A CRRECT IXING WHEN USING THE SCREWS (H). THE HEAD SCREWS (H) SHUD BE ACCMMDATED IN THIS GRVED HES

14 STEP ) PAGE 14 - MDE # 9033N3-ABC-KD-U.1. ATTACH SATS SUPPRT #20 (2X) T ASSEMBED HEADBARDS AND TBARDS USING (08) SCREWS (), THE META PATES (N) AREADY IXED, A PHIIPS HEAD SCREWDRIVER (NT PRVIDED) AND THE PRE-DRIED HES CATED N SAT ENDS AS GUIDE, AS SHWN N DRAWING AND DETAI. 2X IX MATTRESS SUPPRT SATS #19 (1X) INT BED RAME (WITH HES T ATTACH ADDER) # AND BED RAME # UPPER BED USING (28) SCREWS (G), A PHIIPS HEAD SCREWDRIVER (NT PRVIDED) AND THE PRE-DRIED HES CATED N SAT ENDS AS GUIDE, AS SHWN N DRAWING. NTE: PEASE START IXING THE CENTRA RAI MATTRESS SAT SUPPRT, ATER IXING TW RAIS NEXT T HEADBARD AND TBARD AND THEN YU CAN PRCEED IXING THE THER RAIS. 06 G G 19 G G 4X 19 G 4X 20X PRCEED IN THE SAME WAY AS STEP.1.AND.2 T ATTACH THE MATTRESS SUPPRT SATS INT BED RAMES WER BUNK.

15 STEP 13) PAGE 15 - MDE # 9033N3-ABC-KD-U WITH THER PERSN HEP PACE UPPER BED INT WER BED ITTING WDEN DWES (B) PREVIUSY INSERTED N THE TP HEADBARD AND TBARD WER BED PSTS AS SHWN NDRAWING (STEP 8). 4x

16 STEP 14) PAGE 16 - MDE # 9033N3-ABC-KD-U ATTACH ADDER TREAD #08 (4X) T RAI R ADDER # 13 (2X) USING THE WDEN DWES AREADY INSERTED AS GUIDE IX ADDER TREADS # 08 (4X) T RESPECTIVE RAI R ADDER # 13 (2X) USING PRE-DRIED HES AS GUIDE, (08) SCREWS (E) AND AN AEN WRENCH () (PRVIDED), AS SHWN N DRAWING IX () META HK (M) T RAI R ADDER # 13 (2X) USING PRE-DRIED HES AS GUIDE, (08) SCREWS (P) AND A PHIIPS HEADSCREWDRIVER ( NT PRVIDED), AS SHWN N DRAWING. P P M P P M P P M 4X P P M X 08 P P M STEP 15) ATTACH SHRT GUARD RAI ET PST #16 AND SHRT GUARD RAI RIGHT PST #17 T SHRT GUAR DRAI # 18 (2X) USING THE WDEN DWES AREADY INSERTED AS GUIDE IX SHRT GUARD RAI ET PST #16 AND SHRT GUARD RAI RIGHT PST #17 T SHRT GUAR DRAI # 18 (2X) USING PRE-DRIED HES AS GUIDE, () SCREWS (D) AND AN AEN WRENCH () (PRVIDED), AS SHWN N DRAWING

17 STEP 16) PAGE 17 - MDE # 9033N3-ABC-KD-U 16.1 IX SHRT GUARD RAI ET PST #16 AND SHRT GUARD RAI RIGHT PST #17 T BED RAME (WITH HES T ATTACH ADDER) # USING PRE-DRIED HES AS GUIDE, (02) SCREWS (E) AND AN AEN WRENCH () (PRVIDED), AS SHWN N DRAWING ATTACH ASSEMBED ADDER T BUNK BED USING PRE-DRIED HES CATED N BED RAI SIDES # AND # AS GUIDE, () SCREWS (), THE META HKS (M) AREADY IXED AND A PHIIPS HEADSCREWDRIVER ( NT PRVIDED), AS SHWN N DRAWING. 13 4X 16 E 17 E 13 E 13

18 PAGE 18 - MDE # 9033N3-ABC-KD-U WARNING T HEP PREVENT SERIUS R ATA INURIES RM ENTRAPMENT R AS: 1- W THE INRMATIN N THE WARNINGS APPEARING N THE UPPER BUNK END STRUCTURE AND N THE CARTN. D NT REMVE WARNING ABE RM BED. 2-AWAYS USE THE RECMMENDED SIZE MATTRESS R MATTRESS SUPPRT, R BTH, T HEP PREVENT THE IKEIHD ENTRAPMENT R AS. 3-USE NY MATTRESS WHICH IS NG AND 37 1/2-38 1/2 WIDE N UPPER BUNK. 4-SURACE MATRESS MUST BE AT EAST 5 IN.(7 MM) BEW THE UPPER EDGE GUARDRAIS. 5-ENSURE THICKNESS MATRESS AND UNDATIN CMBINED DES NT EXCEED 8 1/2. 6-D NT AW CHIDREN UNDER 6 YEARS AGE T USE THE UPPER BUNK. 7-PERIDICAY CHECK AND ENSURE THAT THE GUARDRAI,ADDER,AND THER CMPNENTS ARE IN THEIR PRPER PSITIN, REE RM DAMAGE, AND THAT A CNNECTRS ARE TIGHT. 8- D NT AW HRSEPAY N R UNDER THE BED, PRHIBIT UMPING N THE BED. 9-PRHIBIT MRE THAN NE PERSN N UPPER BUNK. 10-RECMMENDED WEIGHT N UPPER BUNK BED NT T EXCEED 165 BS=75KG -AWAYS USE THE ADDER R ENTERING AND EAVING THE UPPER BUNK. -D NT USE SUBSTITUTE PARTS.CNTACT THE MANUACTURER R DEAER R REPACEMENT PARTS. 13-R REPACEMENT PARTS, INCUDING ADDITINA GUARDRAIS, PEASE CNTACT: INN HME DECR PRDUCTS,INC. - T REE NUMBER USE A NIGHT IGHT MAY PRVIDE ADDED SAETY PRECAUTIN R A CHID USING THE UPPER BUNK. 15-AWAYS USE GUARDRAIS N BTH NG SIDES THE UPPER BUNK. 16-I THE BUNK BED WI BE PACED NEXT T A WA,THE GUARDRAI THAT RUNS THE U ENGTH THE BED SHUD BE PACED AGAINST THE WA T PREVENT ENTRAPMENT BETWEEN THE BED AND THE WA. 17-THE USE WATER R SEEP TATIN MATTRESSES IS PRHIBITED. 18-KEEP THESE INSTRUCTINS R UTURE REERENCE. 19-STRANGUATIN HAZARD - NEVER ATTACH R HANG ITEMS T ANY PART THE BUNKBED THAT ARE NT DESIGNED R USE WITH THE BED; R EXAMPE, BUT NT IMITED T, HKS, BETS AND UMP RPES.

19 PAGE 19 MDE # 9033N3-ABC-KD-U ADDITINA ASSEMBY INSTRUCTINS (2) U / U TWIN BED MDE # 9033N3-ABC-KD-U 59 15/ /8 34 1/4 WE ARE HERE T HEP! We do our best to insure that your furniture arrives in excellent condition. In the event that a part is damaged or missing, inon Home Decor will be happy to provide you with replacement parts, at no charge, within 30 days of purchase, providing the parts are available in our warehouse and the item purchased are part of our current inventory. In order to receive spare parts, at no charge, you must provide proof of purchase within 30 days. If you need assistance with assembly or replacement parts, please call inon Customer Service, prior to returning the item to the store. ur office is open Monday riday 9AM 5PM, Eastern Standard Time. ur Toll free customer service number is: r visit our web site to order spare parts and for care instructions on your newly purchased furniture. INN HME DECR PRDUCTS,INC. IMPRTANT PEASE READ A INSTRUCTINS IN THIS BKET BERE STARTING ASSEMBY MADE IN BRAZI R INN HME DECR PRDUCTS,INC. SC2/069

20 PAGE 20 MDE # 9033N3-ABC-KD-U HARDWARE PACKAGE CUNT PEN HARDWARE PACKAGE N A AT SURACE CVERED WITH NEWSPAPER. CUNT EACH PIECE HARDWARE T MATCH THE UANTITY NUMBER IN THE HARDWARE IDENTIICATIN CUMN. CA CUSTMER SERVICE I ANY THE PARTS ARE MISSING. W THE ETTER IDENTIICATIN WHEN READING THE ASSEMBY DRAWING THRUGH R. HARDWARE IDENTIICATIN 16 R STEP 1) 1.1 INSERT (08) WDEN DWES (A) INT THE PRE-DRIED HES CATED AT THE EDGES BED RAME # (3X) AND BED RAMES (WITH HES T ATTACH ADDER) # USING THE PRE-DRIED HES AS GUIDE, AS SHWN N DRAWING. 3x

21 STEP 2) PAGE 21 MDE # 9033N3-ABC-KD-U 2.1. ATTACH BED RAMES # (2X) T WER HEADBARD AND TBARD PSTS # AND # 02 INSERTING THE WDEN DWES CATED AT BTH ENDS BED RAMES # (2X), AS SHWN N DRAWING BEW PRCEED SCREWING INSERTING () SCREWS ( C ) RM UTSIDE WER HEADBARD PSTS # (1X) AND #02 (1X) REACHING RESPECTIVE () EIPSE NUTS (I) THAT SHUD BE PSITINED INT HES CATED AT INNER SIDE BED RAME #. SCREW THEM USING AN AEN WRENCH (PRVIDED ) AS SHWN N DRAWING AND DETAI. NTE: WHEN YU IX THE BED RAME # (2X), PEASE MAKE SURE THE PRE-DRIED HES ARE AIGNED VERTICAY, AS PER DETAI. 02 STEP 3) 3.1. PRCEED IN THE SAME WAY AS STEP 2.1 AND 2.2 T ATTACH BED RAME # (2X) T PSTS # AND #02, AS SHWN N DRAWING INSERT (4) PASTIC HE CVERS (R ) AND (02) PASTIC HE CVERS () INT THE HES CATED AT WER TP TRIM # 22 (2X), AS SHW N DRAWING. R R R R R 22 02

22 STEP 4) PAGE 22 - MDE # 9033N3-ABC-KD-U 4.1.ATTACH BED RAMES # (1X) AND # T UPPER HEADBARD AND TBARD PSTS # 03 AND # INSERTING THE WDENDWES CATED AT BTH ENDS BED RAMES # (1X) AND #, AS SHWN N DRAWING BEW PRCEED SCREWING INSERTING () SCREWS ( C ) RM UTSIDE UPPER HEADBARD PSTS #03 AND # REACHING RESPECTIVE () EIPSE NUTS (I) THAT SHUD BE PSITINED INT HES CATED AT INNER SIDE BED RAMES # AND #. SCREW THEM USING AN AEN WRENCH (PRVIDED ), AS SHWN N DRAWING AND DETAI.. NTE 1: WHEN YU IX THE BED RAME # (2X), PEASE MAKE SURE THE PRE-DRIED HES ARE AIGNED VERTICAY, AS PER DETAI. 03 STEP 5) 5.1. PRCEED IN THE SAME WAY AS STEP 4.1 AND 4.2. T ATTACH BED RAME # (1X) AND # T TBARD PSTS # 05 AND #06, AS SHWN N DRAWING

23 STEP 6) PAGE 23 - MDE # 9033N3-ABC-KD-U 6.1. ATTACH SATS SUPPRT #20 (2X) T ASSEMBED HEADBARDS AND TBARDS USING (08) SCREWS (), THE META PATES (N) AREADY IXED, A PHIIPS HEAD SCREWDRIVER (NT PRVIDED) AND THE PRE-DRIED HES CATED N SAT ENDS AS GUIDE, AS SHWN N DRAWING AND DETAI. 2X IX MATTRESS SUPPRT SATS #19 (1X) INT BED RAME (WITH HES T ATTACH ADDER) # AND BED RAME # UPPER BED USING (28) SCREWS (G), A PHIIPS HEADSCREWDRIVER (NT PRVIDED) AND THE PRE-DRIED HES CATED N SAT ENDS AS GUIDE, AS SHWN N DRAWING. 06 NTE: PEASE START IXING THE CENTRA RAI MATTRESS SAT SUPPRT, ATER IXING TW RAIS NEXT T HEADBARD AND TBARD AND THEN YU CAN PRCEED IXING THE THER RAIS. 03 G 19 G G G 4X G 4X X PRCEED IN THE SAME WAY AS STEP 6.1.AND 6.2 T ATTACH THE MATTRESS SUPPRT SATS INT BED RAME # (2X) AND PSTS # (2X) AND # 02 (2X) ANTHER BED.

24 STEP 7) PAGE 24 - MDE # 9033N3-ABC-KD-U 7.1. INSERT (18) PASTIC HE CVERS () INT THE HES CATED AT HEADBARD AND TBARD PSTS # AND # 05 AND WER TP TRIM # 21 (2X), AS SHW N DRAWING