Item #: BTOLSP Assembly Instructions

Size: px

Start display at page:

Download "Item #: BTOLSP Assembly Instructions"

Cornelius Ryan
5 years ago
Views:

1 Item #: BTOLSP Assembly Instructions Revised 06/2012

2 Instruction Manual IMPORTANT INFORMATION READ BEFORE ASSEMBLING THIS PRODUCT Follow the information on the warning labels found on the bunk bed and on the packaging. Do not remove the warning labels from the bed. Use only a mattress with the dimensions in.l x in.w x 6 in.h on the upper bunk. The surface of the mattress must be at least 5 in. (127mm) below the upper edge of the guardrails. Mattress must not exceed the maximum thickness of 6 in. Always use the recommended size of mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls. The use of a water or sleep flotation mattress is prohibited. Replacement parts, including additional guardrails, may be obtained from any of Walker Edison Furniture Company s dealers or by contacting us online at DO NOT use substitute parts. Contact the manufacturer or dealer for replacement parts. Always use guardrails on the upper bunk. If the bunk bed will by placed next to a wall, the guardrail running the full length of the bed should by placed against the wall to prevent entrapment between the bed and the wall. Periodically check that the guardrails, ladders and other components of the bed are in their proper position, free from damage and that all connectors are tight. Always use the ladder to access the upper bunk. DO NOT allow children under 6 years of age to use the upper bunk. DO NOT allow horseplay on or under the bed. Prohibit jumping on the bed. Prohibit more than one person on the upper bunk. The use of a night light may provide an added safety precaution for a child using the upper bunk. STRANGULATION HAZARD Never attach or hang items to any part of the bunk bed that are not designed for use with the bed; including but not limited to hooks, belts and jump ropes. Keep these instructions for future reference.

3 Parts List

5 Assembly Options Option A - Ladder Right To build this option follow Steps 1-7, Steps 8A-12A and Step 13. Option B - Ladder Left To build this option follow Steps 1-7, Steps 8B-12B and Step 13.

6 Attach guardrail (10) and crossbar (8) to posts (1,4) using bolts (A). Tighten bolts (A) with wrench (H). Please note the position of all pre-drilled holes as shown above before attaching bunk bed parts together. Attach second guardrail (10) and second crossbar (8) to posts (2,3) using bolts (A). Tighten bolts (A) with wrench (H). Please note the position of all pre-drilled holes as shown above before attaching bunk bed parts together.

7 Attach crossbar (5) to post (1) and crossbars (6,7) to post (4) using bolts (A). Please note the position of all pre-drilled holes as shown above before attaching bunk bed parts together. Tighten bolts (A) with wrench (H).

8 Attach opposite end of crossbar (5) to post (2) and opposite ends of crossbars (6,7) to post (3) using bolts (A). Tighten bolts (A) with wrench (H).

9 6 5 Roll mattress support slats (13) out along the upper bunk and secure them to the upper bunk using anchors (F) and bolts (A) where indicated above. Bolts (A) will screw directly into crossbars (5,6). Tighten bolts (A) with wrench (H).

11 Screw double-ended bolts (D) into post (2). D D D Slide washers (E) onto double-ended bolts (D). Screw ladder rungs (12) onto double-ended bolts (D). Ladder rungs (12) will fit into washers (E).

12 Fit washers (E) onto opposite ends of ladder rungs (12). Attach ladder support rail (11) to ladder rungs (12) using bolts (C). Tighten bolts (C) with wrench (H). Secure ladder support rail (11) to guardrail (10) using bolt (A) and to crossbar (8) using bolt (B). Tighten bolts (A,B) with wrench (H).

13 Option A Final Assembly P.13

14 Screw double-ended bolts (D) into post (1). D D D Slide washers (E) onto double-ended bolts (D). Screw ladder rungs (12) onto double-ended bolts (D). Ladder rungs (12) will fit into washers (E).

15 Fit washers (E) onto opposite ends of ladder rungs (12). Attach ladder support rail (11) to ladder rungs (12) using bolts (C). Tighten bolts (C) with wrench (H). Secure ladder support rail (11) to guardrail (10) using bolt (A) and to crossbar (8) using bolt (B). Tighten bolts (A,B) with wrench (H).

16 Option B Final Assembly P.16

17 *OPTIONAL: Angle brackets (G) can be used to attach the bed to a wall for additional support. You must use hardware suitable for the particular wall type, which is not included as there are many different wall types. You must also mount the bed to the structure of the wall (i.e. wood studs, metal studs or cement/brick) directly. DO NOT attach the bed to the surface of the wall without anchoring into the structural framework of the wall. Please seek professional advice if you are unsure of your own ability to do this correctly. Walker Edison Furniture Company makes no representation of warranty, expressed or implied, to the strength of any structure and the wall s ability to hold your bed. You assume all responsibility and indemnify Walker Edison Furniture Company of any and all damages that may be incurred by attaching your bed to the wall. P.17

Item #: BTLD46SP Assembly Instructions

Item #: BTLD46SP Assembly Instructions Revised 06/2012 Instruction Manual IMPORTANT INFORMATION READ BEFORE ASSEMBLING THIS PRODUCT Follow the information on the warning labels found on the bunk bed and